root/lm-sensors/branches/lm-sensors-3.0.0/CHANGES @ 4384

Revision 4384, 79.5 KB (checked in by khali, 8 years ago)

README.patches: Delete, obsolete.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
5  File Add a dme1737 section
6  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
7  File README.patches: Delete, obsolete
8  Library: Clean up pwm symbol names translation
9           Add dme1737 support
10  Man page sensors.conf.5: Update the chip statement section
11  Program isadump: Detect when address bit 7 is a busy flag
12  Program mkpatch: Delete
13  Program pwmconfig: Use smaller steps for low PWM values
14  Program rrd: Support only hwmon class devices
15               Look for rrd in /usr/bin by default
16               Add missing shell declarations
17               Update URI
18  Program sensors: Drop ddcmon and eeprom support
19                   Add dme1737 support
20  Program sensors-detect: Stop Super-I/O probe after first family success
21                          Fix SMSC DME1737 detection
22                          Add /usr/sbin to the PATH (#2199)
252.10.3 (20070319)
26  Library: Do not skip i2c adapters with only a class device and no
27            physical device. This change is required to survive the
28            planned struct class_dev removal from future 2.6 kernels.
29           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
30           Recognize i2c-isa-based devices as such even after class_dev
31            is gone
32           Compile with -D_REENTRANT
33           Fix support of Linux 2.6's max6650 driver
34           Fix max1619 support
35  Man page i2cdetect.8: Scanning range can be restricted
36  Module bmcsensors: Fix debugging messages
37  Module i2c-ali1563: Improve the status messages (2.6 backport)
38                      Fix device initialization (2.6 backport)
39  Module i2c-amd8111: Cleanups (2.6 backport)
40                      Fix initialization race (2.6 backport)
41  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
42  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
43  Module i2c-viapro: Add CX700 support (2.6 backport)
44  Module smsc47m1: Add SMSC LPC47M292 support
45                   Get rid of a useless semaphore (2.6 backport)
46  Programs i2cdetect, i2cdump, isadump: Flush output in real time
47  Program i2cdump: Cleaner output in SMBus block read mode
48  Program Fix pwmN_enable access (#2190)
49  Program sensors: Add smsc47m2 support (fans)
50                   Fix -A option (hide adapter name) on error
51  Program sensors-detect: Only probe relevant I2C addresses
52                          Drop ARP-capable device detection
53                          Add Maxim MAX6655/MAX6656 detection
54                           (Olexiy Avramchenko)
55                          Add Maxim MAX1668, MAX1805, MAX1989 detection
56                          Add VIA CX700 detection
57                          Drop legacy W83627HF ISA detection
58                          Don't bufferize stdout during probes
59                          Speed up the LM75 and LM77 detection
60                          Clean up the EEPROM detection
61                          Add Dallas DS75 detection
62                          Add SMSC LPC47M292 detection
63                          Add nVidia MCP61 and MCP65 detection
64                          Fix ADM1028 detection
65                          Add Nat. Semi. PC8347L Super-I/O detection
66                          Add SMSC SCH5504 Super-I/O detection (no sensors)
67                          Make the LM78 and W83781D detection safer
702.10.2 (20070115)
71  RPM: Obsolete, removed
72  File doc/fan-divisors: Update
73  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
74  Library: Add support for the pc87247 driver (fans only)
75           Probe for busses before chips
76           Drop support for algorithm names
77           Add support for coretemp driver   
78           Major update/optimization of config-file scanner
79           Add config-file scanner regression tests
80           Add f71872f support
81           Add w83627dhg support (David Holl, #2157)
82           Get the i2c adapter names from
83           Add adm1029 support (Corentin Labbe)
84  Man page i2cdetect.8: Describe the output convention
85  Man page sensors.1: Update (option -c) and clean up
86  Module bmcsensors: Fix several warnings
87                     Fix fragile structure initialization
88  Module i2c-i801: Add ICH9 support
89  Module p4b_smbus: Add support for the ICH5
90  Module f71805f: Fix the device address decoding (2.6 backport)
91  Module icspll: Delete. It was useless and dangerous.
92  Program Remove spaces at end of lines
93  Program eepromer: Fix loads of warnings
94  Program i2cdetect: Make the output clearer
95  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
96  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
97                            without need of recompilation.
98  Programs dump/*: More robust handling of user inputs
99  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
100                                  Add support for non-i2c drivers
101  Program Disable debugging by default
102                         Add support for non-i2c drivers
103                         More tolerant config file parsing
104  Program sensord: Add pc87247 support (fans only)
105                   Add vt1211 support (#2150)
106                   Add w83627dhg support (David Holl, #2157)
107                   Add w83627ehf voltage support (Dave Platt)
108                   Add k8temp support (Dave Platt)
109  Program sensors: Add pc87247 support (fans only)
110                   Hide error on missing f71805f fan
111                   Handle option -c more efficiently
112                   Drop option -a (show algorithm names)
113                   Add f71872f support
114                   Add w83627dhg support (David Holl, #2157)
115                   Add adm1029 support (Corentin Labbe)
116                   Hide error on missing w83793 temp (Gong Jun)
117  Program sensors-detect: Add SMSC DME1737 detection
118                          Add Fintek F71882FG and EPoX EP1308 detection
119                          Add Intel Core thermal sensor detection
120                          Preallocate memory for I2C_FUNCS ioctl (#2138)
121                          Prevent misdetection of MAX6633/MAX6634/MAX6635
122                          Add Intel ICH9 detection
123                          Add Maxim MAX6648/MAX6692 detection
124                          Improve ADM1029 detection
125                          Add Andigilog chips detection
126                          Add Intel AMB FB-DIMM thermal sensor detection
127                          Add ATI SB600 detection
1302.10.1 (20060924)
131  File doc/developers/checklist renamed to dev/developers/release_checklist
132          with clarifications and updates for new SVN server.
133  File README.package: Delete.
134  File doc/busses/i2c-piix4: Update (2.6 backport)
135  File doc/developers/sysfs-interface: Update
136  File etc/ Add an smsc47m192 section
137                            Comment out all set statements
138                            Add an it8716 section
139                            Add a w83793 section
140                            Adjust the vt1211 section to match the new driver
141                             interface
142  Library: Fix device scan when no i2c support is present
143           Add support for W83627EHF voltage inputs and alarms
144           Add support for the smsc47m192 driver
145           Fix all memory leaks (yeah!)
146           Fix no sensors being reported as an error
147           Add support for the IT8716F and IT8718F chips
148           Add support for the W83793 chip (Yuan Mu)
149           Map the 2.6 adm1026's fan8 to fan0
150           Missing sysfs busses and classes are not errors
151           Change vt1211 temp3-7 magnitude from 1 to 3
152  Makefile: Don't grep autoconf.h on user-space targets
153            Fix depmod on non-running kernel version
154            Remove empty include directories on make user_uninstall
155  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
156  Module i2c-amd756-s4882: Improve static semaphore initialization
157                           (2.6 backport)
158  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
159                   Add ICH8 support (2.6 backport)
160                   Fix block transaction poll loops (2.6 backport)
161                   Remove PCI function check (2.6 backport)
162                   Cleanups (2.6 backport)
163  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
164  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
165                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
166                    Drop the fix_hstcfg parameter (2.6 backport)
167  Module i2c-viapro: Fix compilation with kernels < 2.4.21
168                     Add VT8237A and VT8251
169  Module lm83: Add LM82 support (2.6 backport)
170  Module vt1211: The VT1211 has no in6
171                 Rework the voltage and temperature conversions and the
172                  temperature input order to match the Linux 2.6 driver
173  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
174                  Add specific alarm and beep defines for the W83791D
175  Module w83792d: Fix PWM range (2.6 backport)
176  Program Decode depending on the memory type
177                           Decode the manufacturing date to an ISO8601 date
178                           Add the memory size computation and provide brief
179                            timing characteritics for SDRAM/DDR/DDR2 memory
180                           Add memory size computation for Rambus memory
181                           Various output cleanups and fixes
182  Program Add /usr/sbin or /usr/local/sbin to $PATH if needed
183  Program Detect and skip false positives
184  Program i2cdetect: Add a mode to print adapter functionalities
185  Program i2cdump: Restore bank after bank switching
186                   Add new mode W (read word on even register addresses)
187  Program mkpatch: Fix typo breaking f71805f
188                   Turn warnings on (-w), and fix them
189                   Print a usage message on missing command line parameters
190  Program pwmconfig: Use mktemp instead of tempfile
191  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
192                   Add smsc47m192 support
193                   Add abituguru support (Hans de Goede)
194                   Fix memory leak when printing an unknown chip
195                   Add it8716 and it8718 support
196                   Make each it87 fan and fan div optional
197                   Print missing w83791d values
198                   Add w83793 support (Yuan Mu)
199                   The adt7463 may not have in4 (#2119)
200                   Hide more vt1211 missing input errors
201                   Clearer error messages when no sensors found
202  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
203                          Add ATI IXP200/300/400 SMBus detection
204                          Prevent warning on 64-bit PCI addresses
205                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
206                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
207                           F75384S/M, F75387SG/RG and F81218D detection
208                          Add Winbond W83793R/G and W83627DHG detection
209                          Handle the W83791D driver difference between kernels
210                          Add nForce4 MCP04, MCP51 and MCP55 detection
211                          Add AMD Geode devices detection
212                          Add ITE IT8716F and IT8718F detection
213                          Add NatSemi/Winbond PC87427 detection
214                          Get driver information for busy addresses from
215                           sysfs (2.6 only)
216                          Drop the ISA IT87xxF detection
217                          Check i2c adapter functionalities before probing
218                          Add Intel ICH8 SMBus detection
219                          Add AMD K8 thermal sensors detection
220                          Simplify detection of SiS5595, VIA686 and VT8231
221                          Add Analog Devices ADM1033, ADM1034, ADT7462,
222                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
223                          Check for root user at startup
224                          Attempt to be slightly more user-friendly
225                          Add VT8237A and VT8251
226                          Remove detection of nVidia graphics adapters
227                          Use sysfs for PCI device enumeration
228                          Add generic PCI SMBus adapter detection
229                          Add generic Super-I/O logical device detection
230                          Add SMSC LPC47M172/182 detection
2332.10.0 (20060214)
234  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
235  File doc/busses/i2c-viapro: Update (2.6 backport)
236  File doc/chips/via686a: Update (2.6 backport)
237  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
238  File etc/ Do not set vrm by default
239  File i2c-dev.h: Fix union i2c_smbus_data definition
240                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
241                  Add missing parentheses around macros
242                  Drop I2C_FUNC_SMBUS_EMUL
243                  Drop I2C_FUNC_SMBUS_*_PEC
244                  Drop I2C_SMBUS_*_PEC
245  File sensors_vid.h: Drop default VRM
246  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
247           This is intentional.  Use if you still
248           need your memory SPD data.
249  Library: Big update to use libsysfs.  More TODO though.
250           Fix bus matching code for Linux 2.6 (Karsten Petersen)
251           Add f71805f, w83687thf support
252           Add platform drivers support
253           Fix sysctl warnings on x86_64
254           Restore vt1211 temp1
255  Makefile: Compile user-space programs with -Wundef
256  Module i2c-i801: Simplify the hardware PEC code
257                   Always set PEC mode explicitly before each transaction
258  Module i2c-i810: Documentation update, PCI IDs cleanup
259  Module i2c-keywest: Remove bus probing code (2.6 backport)
260  Module i2c-nforce2: Remove dead code (2.6 backport)
261                      Add the ID of the nForce4 MCP-04 (2.6 backport)
262  Module i2c-via: Remove dead code
263  Module i2c-viapro: Remove dead code
264                     Support I2C block read (2.6 backport)
265                     Code cleanups (2.6 backport)
266                     Improve debug register dump (2.6 backport)
267  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
268          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
269          i2c-sis645: Use pci_driver name to request I/O region; do
270                      not initialize i2c_adapter name to "unset" (2.6
271                      backport)
272  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
273                                              (2.6 backport)
274  Module adm9240: Cleanups (2.6 backport)
275  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
276  Module it87: Minor cleanups
277               Fix fan3_div setting bug (Anton V. Staaf)
278  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
279               Separate the register read function
280               Add PEC support for the ADM1032
281  Module via686a: Cleanups
282  Module w83627hf: Drop useless initialization step (2.6 backport)
283                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
284                   Fix alarms (Yuan Mu)
285                   Preserve fan min on fan div change (Yuan Mu)
286                   Properly handle W83627THF without VID (Yuan Mu)
287                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
288                   Add W83687THF support
289  Module w83781d: Drop W83697HF support (Grant Coady)
290  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
291                  Fix fan control mode (PWM/DC) reporting
292                  Fix fan div auto-adjust (Yuan Mu)
293                  Fix the subclient handling
294  Module w83l785ts: Minor cleanup (2.6 backport)
295  Module vt1211: Restore temp1
296  Modules vt1211, vt8231: Change default VRM to 9.1
297  Program Add lookup tables for manufacturer names
298                           Fix rounding error in PCxxxx speed computation
299                           Improve text output
300                           Improve speed under Linux 2.6
301                           Verify checksum before decoding anything
302                           Improve manufacturing location decoding
303                           Improve memory type detection
304                           Improve part number decoding
305  Program i2cdump: Drop now useless #ifdef tests
306                   Fix capability check for continuous byte mode
307  Program i2cget: New
308  Program i2cset: Add PEC support
309                  Fix argc check
310  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
311                                       Print the correct bus type if bus
312                                       functionality can be queried
313  Program isadump: Display the real addresses in flat mode
314  Program Silently skip already existing nodes
315  Program mkpatch: Include f71805f
316  Program sensord: Do not log algorithm names
317                   Drop EEPROM support (Aurelien Jarno)
318                   Add W83627EHF, F71805F/FG support
319                   Fix PC87365/PC87366 alarms
320  Program sensors: Drop free_the_label
321                   Fix compilation with uclibc (no iconv)
322                   Add f71805f, w83687thf support
323  Program sensors-detect: Drop algorithm names
324                          Do not rely on i2cdetect -l printing algo names
325                          Simplify adapter name matching mechanism
326                          New address for ADM1032, ADT7461
327                          Improve ADT7467, ADT7468 support
328                          Fix MAX6659 reported driver
329                          Add Fintek F71805F detection
330                          Add Analog Devices ADT7476 detection
331                          Add Intel 82845G detection
332                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
333                          Fix udev detection in some corner case
334                          Improve DS1621 detection
335                          Always prefer ISA access over SMBus access
3382.9.2 (20050906)
339  File doc/chips/*: Big update (2.6 backport)
340  Library: Drop ds1780-specific code (now use adm9240)
341           Fix memory leak in sensors_get_label()
342           Support /sys/class/hwmon (Linux 2.6.14+)
343           Limit stack usage in sensors_read_proc_chips()
344  Makefile: Detect 2.6+ kernels and check targets
345  Man page isaset.8: Fix typos
346  Module adm1031: Fix broken kfree() calls
347  Module i2c-ali1563: New (2.6 backport by Winbond)
348  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
349  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
350          w83627hf.c: Tag find function __init
351  Module lm93: Fix memory leak
352  Module smsc47m1: Fix PWM enable polarity on read
353  Modules w83627hf, w83781d: Allow setting fan divisor to 128
354  Program Support Linux 2.6 (Burkart Lingner)
355                           Added DDR/DDR2 frequency reporting in convenient
356                           form of DDRxxx PCyyyy
357  Program i2cdump: Properly handle short i2c block reads
358  Program Fix compile errors
359  Program mkpatch: Include i2c-ali1563
360                   Include w83792d
361  Program pwmconfig: Fix unsafe temporary file use
362  Program rrd: Support 2.6 kernels
363  Program sensord: Add support for w83637hf
364                   Support pc87360 (Henrik Brix Andersen)
365  Program sensors: Support the VAIO "VGN" prefix for eeprom
366  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
367                          Advertise the w83792d driver
368                          Improve IT8705F and IT8712F detection
369                          Merge LM82 and LM83 detection
370                          Add W83687THF detection
3732.9.1 (20050412)
374  File doc/busses/i2c-nforce2: Update
375  File doc/chips/it87: Update
376  File doc/chips/lm90: Update for adt7461
377  File doc/chips/mic74: New
378  File etc/ New sections for lm92 and w83792d
379  Library: Add support for 2.6 fscpos driver (Stefan Ott)
380           Fix sis5595 in4 (Aurelien Jarno)
381           Add support for 2.6 gl520sm driver (Maarten Deprez)
382           Add support for 2.6 bmcsensors driver (Yani Ioannou)
383           Add support for w83792d (Chunhao Huang/Winbond)
384           Add support for 2.6 adt7461 (James Chapman)
385           Add support for 2.6 lm92
386           Add support for 2.6 vt1211
387           Add preliminary support for 2.6 w83627ehf
388  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
389            Use -fno-strict-aliasing on all architectures
390  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
391  Module bmcsensors: Fix compile error
392                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
393  Module ds1621: Fix detection (Aurelien Jarno)
394  Module eeprom: Discard SPD-centric checksum module parameter
395                 Cleanup detection function (backport from Linux 2.6)
396  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
397  Module i2c-i801: Temporarily disable broken I2C block read
398  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
399                   Gelato)
400  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
401  Module i2c-viapro: Prevent repeated resets
402  Module it87: Improve Super-I/O detection
403               Limit I2C address range
404               Support VID on the IT8712F
405  Module lm75: Only initialize CMP/INT bit
406  Module lm78: Fix bug with setting negative temperature limits
407  Module lm85: Properly differentiate between ADM1027 and ADT7463
408               Add EMC6D102 support
409  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
410               Add limited ADT7461 support
411  Module lm93: Fix IN10 (+5V) scaling
412  Module mic74: New
413  Module w83627hf: Support secondary Super-I/O address
414                   Enable temp2 and temp3 if they are disabled
415  Module w83781d: Revert AS99127F temp2 and temp3 computation change
416                  Skip final initialization step for AS99127F chips
417  Module w83792d: New (Chunhao Huang/Winbond)
418  Program ddcmon: New; user-space replacement for the ddcmon driver
419  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
420  Program isadump: Handle Super-I/O keys
421  Program lm_sensors.init: Cleanups (Axel Thimm)
422  Program Add basic command-line interface
423  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
424  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
425                     Don't complain about read-only enable files (lm85)
426                     Fix handling of alternate config file name
427  Program sensord: Fix erroneous error message (Aurelien Jarno)
428                   Support sis5595 in4 (Aurelien Jarno)
429                   Support w83627thf
430                   Support the separate it8712 prefix (Aurelien Jarno)
431  Program sensors: Display sis5595 in4 (Aurelien Jarno)
432                   No errors on missing pc87360 fans
433                   Add gl520sm support (Maarten Deprez)
434                   Improve vt1211 error/ignore handling (Michael Carland)
435                   Support w83792d, w83627ehf
436  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
437                          Improve IT8705F and IT8712F detection
438                          Improve udev detection
439                          Fix DS1621 detection
440                          Add W83627EHF detection
441                          Add ATI SMBus detection
442                          Add VT1211 alias detection
443                          Warn if chip modules not found
444                          Add i2c-ipmi to list if bmcsensors is on it
445                          Add PC87591 detection
446                          Search for correct udev db file name
447                          Add nForce3 250Gb and nForce4 detection
4502.9.0 (20041228)
451  NOTE: Requires i2c-2.9.0 or newer!
452  File README.thinkpad: Update
453  File doc/chips/it87: Cleanups
454  File doc/chips/lm63: New
455  File etc/ Set via686a voltage limits
456  File kernel/chips/ Resync module list with mkpatch
457  File kernel/include/sensors_compat.h: Define __devexit_p if missing
458                                        (kernels 2.4.16 and older)
459  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
460                             and dec_use removed in release 2.8.0
461  Modules (all chip drivers): Remove owner from i2c_driver; pass
462                              controlling_mod to i2c_register_entry() again
463  Module bmcsensors: Support function 1/x
464  Module i2c-amd756: Display the real bus name
465  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
466  Module i2c-i801: Support i2c block read (ICH5 and higher)
467                   Add PEC support for ICH6
468                   Add support for ICH7
469  Module i2c-ipmb: Remove from build since it doesn't work
470  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
471  Module icspll: Fix compilation
472  Module lm63: New driver for the National Semiconductor LM63
473  Module lm83: Use signed types for temperatures
474               Check limits on register writes
475  Module lm87: Round voltages properly
476               Retry on read errors (David Knierim)
477               Less agressive init (no reset)
478  Module lm90: Use signed types for temperatures
479               Check limits on register writes
480  Module lm93: Added module parameter for VID pin input thresholds.
481               Fix typo in dynamic VID alarms
482               Adds a couple log messages for failed transactions (David
483               Knierim)
484               Fix compilation breaking C99-ism (Axel Thimm)
485               Fix block read retries
486  Module pc87360: Support secondary Super-I/O address
487  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
488  Library: Add lm63 support
489           Add lpc47b397 support
490  Programs *.init: Rename lockfile to match file name
491  Programs i2cset, isaset: Written byte/word can be masked
492  Program Find eeproms on non-0 i2c bus too
493  Program mkpatch: Include i2c-amd756-s4882
494  Program pwmconfig: Handle new (well, back to old) pwm files names for
495                     Linux 2.6.10 and up
496  Program sensord: Do not scale load average (Aurelien Jarno)
497  Program sensors: Add lm63, lpc47b397 support
498                   Support DDR2 memory module EEPROMs (Rudolf Marek)
499                   Support only one location for the default configuration file
500                   Display the default configuration file location in --help
501                   Simplify the configuration file opening code
502  Program sensors-detect: Improve LM63 detection
503                          Discard IBM Thinkpad detection code
504                          Add PCA9556, LPC47B397, ICH7 detection
505                          Fix W83792D detection, add W83791SD detection
5082.8.8 (20041007)
509  File doc/donations: Update
510  File doc/lm_sensors-FAQ.texi: Add 4.6.1
511                                Update 4.7
512  File doc/chips/gl518sm: Update "iterate" info
513  File doc/chips/it87: Discard outdated module parameters
514  File doc/chips/lm75: LM77 is not supported
515  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
516  File doc/chips/lm93: New
517  File doc/chips/w83l785ts: Improvements
518  File etc/ Fix it87 lines order
519                            Update lm87 section
520  File kernel/include/sensors_vid.h: Support VRM 10.0
521  Library: Support 2.6 adm1025
522           Preliminary support for 2.6 lm87
523           Support 2.6 adm9240
524           Allow an alternative sysfs file name for chip features (2.6)
525           Fix lm83 critical limits (2.6)
526           Add lm93 support
527           Prevent some procfs errors from being silently ignored
528  Makefiles: Implement user_uninstall (Rudolf Marek)
529             Spoof LOGNAME and HOSTNAME when making html man pages
530  Module adm1025: Refine detection
531                  Update limit registers again (revert of 2.8.1)
532                  Init high limits if they read 0
533                  Fix conversions
534  Module lm75: Refine detection
535  Module lm78: Fix init
536  Module lm83: Default to kind lm83 if forced.
537               Fix temperature macros.
538  Module lm90: Add LM86, MAX6657 and MAX6658 support
539  Module lm93: New
540  Module mtp008: Fix the setting of limits on temp2
541  Module pca9540: Refine detection
542  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
543                  Support VID
544                  Fix fan_div file when fan count is less than 3
545                  Additional init and debug
546  Module smsc47m1: Fix pwm_enable being inverted
547  Module w83627hf: Add alternate VCORE/in0 calculation method
548                   Remove reset of chip by driver on initialization
549  Module w83781d: Fix default VRM for w83791d
550  Module w83l785ts: Implement read error handling (backport from 2.6)
551  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
552                    Wait for user input to continue (as opposed to 5 sec
553                    delay), can be skipped with -y
554                    Various cleanups and code refactoring
555                    Update manual pages
556  Program fancontrol.init: New (Dean Takemori)
557  Program Restore fans on many kinds of errors/interrupts
558  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
559                           (Giuseppe Della Bianca)
560  Program Detect devfs and refuse to run
561                    Use mknod's mode instead of chmod
562  Program mkpatch: Include xeontemp and pc87360
563  Program sensors: Rework adm1025 support
564                   Display pc87365/pc87366 VID
565                   Improve smsc47m1 support
566                   Hide 2.6 adm1027 alarm_mask being missing
567                   Print VRM version for all supported chips
568  Program sensors-detect: Support LM93, LM77, LM63
569                          Support PC8739x Super-I/O family (no sensors)
570                          Fix PCA9540 support
571                          Refine ADM1025/ADM1025A detection
572                          Refine LM75 detection
573                          Ignore missing /proc/modules (Andras Bali)
574                          Script-wide Perl cleanups
575                          Support udev
576                          Support W83792D, LM96000
5792.8.7 (20040611)
580  File README.thinkpad: Update 24RF08 status
581  File doc/fan-divisors: More info on accuracy
582  File doc/lm_sensors-FAQ.texi: Update 4.27
583  File doc/chips/adm1031: New
584  File doc/chips/max1619: New
585  File doc/chips/pc87360-fan: Renamed to pc87360
586  File doc/chips/pc87360: Big update
587  File doc/chips/w83781d: Update AS99127F documentation
588  File etc/ Add comments about BP6 voltages
589                            Add comment on Asus A7V8X-X VCore
590                            Misc fixes to lm80 section
591                            Update via686a section
592                            New lm99 section
593                            Add section for LM85-like chips
594                            Preliminary pc87366 section
595                            Add comment on GL520SM application modes
596                            Document beep_enable (Aurelien Jarno)
597                            Preliminary max1619 section
598                            Preliminary adm1030 and adm1031 sections
599  Library: Fix 2.6 VRM
600           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
601           Fully support the PC87360 family
602           Support the lm99
603           Add version and date strings
604           Support 2.6 max1619
605  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
606  Man page i2cdetect.8: document new command line flags
607  Man page i2cdump.8: More details on how i2cdump can write to a chip
608  Modules (all chip drivers): Rework memory allocation scheme.
609  Module adm1031: New (Alexandre d'Alton)
610  Module bmcsensors: Fix oops by creating thread for initialization
611  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
612  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
613          asb100.c, lm92.c: Use swab16
614  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
615  Module gl520sm: Less agressive initialization process
616                  Fix temp1 limits being unsettable in application
617                  Ensure that temp2 and in4 are not used at the same time
618  Module i2c-i801: Support 6300ESB and ICH6
619  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
620  Module i2c-sis645: Add support for SiS655
621  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
622  Module lm90: Support LM99 and LM89
623  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
624               Get rid of useless i2c_probe call
625  Module max1619: New (Alexey Fisher)
626  Module p4b_smbus: Add support for mobile versions of the 82801
627                    (Axel Thimm)
628  Module pc87360-fan: Renamed to pc87360
629  Module pc87360: Also support PC87365 and PC87366
630                  Add write support
631                  Correctly set the chip name depending on the type
632                  Add voltage and temperature support
633                  Fix fan speed computation
634                  Retrieve fans configuration from Super-I/O space
635                  Export pwm_enable (read-only)
636                  Honor pwm invert bits
637                  Clear fan alarms after we read them
638                  Do not read fan data when monitoring is disabled
639                  Do not include SENSORS_INSMOD stuff
640                  New module parameter: init
641                  Fan clock dividers change automatically
642                  Add thermistor dupport
643  Module smsc47m1: Lock on reads and writes
644                   Various PWM fixes
645  Module thmc50: Fix address range
646  Module via686a: Fix voltage roundings
647                  Simplify temperature conversions
648  Module w83781d: Drop PWM support for as99127f
649                  Invert AS99127F beep bits in driver rather than user-space
650  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
651  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
652  Program New
653  Program i2cdetect: Adapt probing method to address
654                     Add -q and -r flags to force probing methods
655                     Allow probing range selection
656  Program isadump: Major improvements
657  Program isaset: New
658  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
659                   module
660                   Include i2c-nforce2
661  Program sensord: New --rrd-no-average parameter
662                   Syncronize time slots with rrd
663                   Fix W83781D temp3 alarm (Aurelien Jarno)
664                   Add ASB100 support (Andrew May)
665  Program sensors: Fully support the PC87360 family
666                   Fix lm80 temperature alarms
667                   Support the lm99
668                   Do not invert AS99127F beep bits anymore
669                   Fix W83781D temp3 alarm (Aurelien Jarno)
670                   Print library version string
671  Program sensors-detect: Rework Super I/O detection
672                          Support SiS655/SiS96x
673                          Support ADT7461 and ADT7467
674                          Better support for ADM1027, ADT7460 and ADT7463
675                          Explicitly support ADM1028
676                          Scan all logical devices of PC87365 and PC87366
677                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
678                          Detect eeproms with software write protect (not
679                          enabled by default)
680                          Support ALi 1563 (2.6 only)
681                          Drop LTC1710 support
682                          Use byte reads for probing on ranges 0x30-0x37 and
683                          0x50-0x5F
684                          Improve LM89 and LM99 support
685                          Support GeForce FX 5900 video cards
686                          Fix devfs misdetection (Aurelien Jarno)
687                          Detect 6300ESB, ICH6
688                          Fix double detection of ISA chips
689                          Support MAX1619
690                          Support PC87373 Super-I/O
691                          Fix unknown adapters appearing multiple times
692                          Refine MAX6650/MAX6651 detection
6952.8.6 (20040405)
696  File README.thinkpad: Update status
697  File doc/chips/pca9540: New
698  File doc/chips/pc87360-fan: New
699  File etc/ Update pcf8591 default configuration
700  Library: Switch to new sysfs naming standard
701           Fix gcc 3.3 warnings (Philipp Thomas)
702           Support 2.6 ds1621 and pcf8591
703           Change pcf8591 magnitudes
704           Support pc87360-fan
705  Makefile: Install shared library 755
706  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
707  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
708  Modules ds1621, pcf8591: Check for capabilities before using them
709                           (Aurelien Jarno)
710  Modules pcf8574, pcf8591: Cleanups
711  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
712  Module adm1021: Better detection and initialization
713  Module pca9540: New driver for the Philips PCA9540
714  Module pc87360-fan: New driver for the National Semiconductor PC87360,
715                      PC87363 and PC87364 Super I/O chips
716  Module smsc47m1: Support the LPC47B27x
717  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
718  Program i2cdetect: Skip special addresses by default
719  Program sensord: Prevent null pointer dereference (Tim Toohey)
720  Program sensors: Print the degree symbol in the terminal's current locale
721                   (Aurelien Jarno)
722                   Update pcf8591 print to support 2.6 driver
723                   Support pc87360-fan
724  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
725                          Improved SiS chips support
726                          Add a white list of IBM systems
727                          Drop support of undetectable adapters
728                          Fix smart battery detection
729                          Add smart battery charger and manager detection
730                          Rework adm1021 and clones detection
731                          The PC87360, PC87363 and PC87364 Super I/O chips
732                          now have a (preliminary) driver
733                          Rework Super I/O detection
734                          Better support of devfs
735  Program New
7382.8.5 (20040305)
739  File doc/chips/SUMMARY: Update
740  File etc/ Epox 8K3A tweaks. (Kronos)
741  Makefiles hotplug and rrd: Remove -o and -g arguments to install
742  Module bmcsensors: Increase max SDRs to 100
743  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
744  Module i2c-amd756: Don't register driver to avoid driver conflicts.
745                     (Daniel Rune Jensen)
746  Module it87: Better temperature sensor types handling (Takeru Komoriya)
747               Fix reset=1 (Takeru Komoriya)
748  Module lm80: Code cleanups
749  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
750  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
751  Module w83627hf: Add w83637hf support
752                   Fix exported name
753                   Fix PWM in w83627thf
754                   Preserve other bits when forcing temp2/3 to comparator mode
755  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
756                  Remove asb100 support
757  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
758          Define driver ID if i2c-id.h doesn't have it yet.
759  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
760          Backport oops fix from Linux 2.6.
761  Modules (all chips): Get rid of useless headers
762  Program Add sysfs support
763  Program sensors: Add w83637hf support
764                   Add support for Shuttle Ethernet EEPROMs
765                   Drop 2.6 subclient detection
766  Program sensors-detect: Add heuristics to the LM80 detection function
767                          Add support for W83L785R, improve W83L784R/AR
768                          Add GeForce FX 5600 as supported by rivatv
769                          More Super IO chips, better handling
770  Library: Update to match renames in fscher
771           Reverse temporary changes to w83l785ts mappings
772           Fix vt1211 and vt8231 uch_config not being writable
773           Add 2.6 lm80 support
774           Add w83637hf support
775           Remove in6 and temp1 from vt1211 and vt8231
776           Add support for Shuttle Ethernet EEPROMs
777           Remove unused as99127f features
7802.8.4 (20040207)
781  File doc/lm_sensors-FAQ.texi: Update 4.20.
782  File doc/chips/it87: Change hyst to low
783  File doc/chips/w83l785ts: New
784  File etc/ Change it87 hyst to low
785                            Fix w83697hf supposed to have temp3
786                            Limits initialization for adm1025/ne1619
787                            Handle fscher voltage conversions
788                            Add Tyan Trinity S2495 KT400 setup (Eric
789                              Schumann)
790                            Fix fscher fan labels (Reinhard Nissl)
791  Library: Better 2.6 eeprom support
792           Change it87 hyst to low
793           Add 2.6 gl518sm, fscher support
794           Fix 2.6 negative voltages handling
795           Temporary fix to w83l785ts mappings
796  Module adm1025: Separate prefix for NE1619
797  Module adm1026: Remove use of temporary ID
798                  Define addresses as a range
799  Module bmcsensors: Fix reservations
800  Module fscher: Externalize voltage conversions
801  Module eeprom: Remove memtype
802  Module i2c-piix4: Fix resource release error
803                    Various cleanups
804  Program Add sysfs support
805  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
806                   Drop linux 2.2 support
807                   Add w83627hf
808  Program sensors: Do not show algorithm by default
809                   Cleanup temperature unit display code
810                   Cleanup label spacing code
811                   Fix output to UTF-8 terms (Marcel Sebek)
812                   Simplify gl518sm print
813                   Do not ignore errors in FSC chips prints
814                   Fix w83l785ts print
815                   Cleanup FSC chips prints
816  Program sensors-detect: Fix PATH issues
817                          Correctly point to the fscher driver
8202.8.3 (20040115)
821  File lm_sensors.spec: Update
822  Library: Add 2.6 eeprom, lm90 support
823           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
824  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
825  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
826  Module i2c-amd756: Fix byte writes
827  Module i2c-tsunami: Cleanups (Daniel Nilsson)
828  Module it87: Fix sg_tlx writes; fix sensor type reporting;
829               add 8712 Super I/O detection;
830               remove initialization of temp_type and fan_ctl;
831               remove init and temp_type module parameters
832  Module lm90: Handle hysteresis differently
833  Module smartbatt: Fix detection, magnitudes, temp
834  Module w83781d: Fix negative voltages
835  Module w83l785ts: New
836  Program eeprog: Make 8 bit mode the default
837  Program fancontrol: Improvements, fixes, support 2.6 kernels
838  Program mkpatch: Add lm75.h
839  Program pwmconfig: Improvements, fixes, support 2.6 kernels
840  Program sensors: Add ASB100 support
841  Program sensors-detect: Add 8712 Super I/O detection;
842                          add W83L785TS detection
8452.8.2 (20031211)
846  IMPORTANT: Limit initialization removed from all chip drivers!
847             If you didn't run 'sensors -s' in the past you may need to now!
848  File Change lm75 scaling back to 1;
849                        Add example for asb100
850  Library: Fix bmcsensors scaling, increase number of sensors;
851           Add w83627thf support; Advance version to 3.0.0;
852           Add hermes, ADM1032, ASB100 support;
853           Add it87 sensor type support;
854           Add sysfs support for kernel 2.6;
855           Fix memory leaks
856  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
857             Fail if no kernel .config file exists;
858             Don't build module dependencies for user and user_install
859  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
860          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
861          smsc47m1, thmc50, via686a, w83627hf, w83781d:
862          Remove initialization of limits by driver.
863  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
864  Modules (chip): Init cleanups
865  Module asb100: New
866  Module bmcsensors: Fix voltage scaling, voltage and fan limits
867  Modules ddcmon, eeprom: Add failure printks
868  Module fscher: New (Fujitsu-Siemens Hermes driver)
869  Module i2c-amd756: Fix AMD8111 support
870  Module i2c-amd8111: Fix byte writes
871  Module i2c-nforce2: Fix byte writes
872  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
873  Module i2c-sis630: Sync with 2.6.0-X driver version
874  Module i2c-viapro: Add support for Via 8237
875  Module it87: Add pwm and "smart guardian" support;
876               add it87 sensor type support
877  Module lm75: Fix negative voltages
878  Module lm90: Add ADM1032 support
879  Module w83781d: Fix 791d and 627hf detection
880  Module w83627hf: Add VID support
881  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
882  Program eeprog: New
883  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
884                                       support sysfs for i2c bus search
885  Program i2cdetect: Add -l option to list busses
886  Program i2cdump: Add 'c' mode for consective address reads
887  Program mkpatch: Cleanups
888  Program pwmconfig: Handle multiple fans controlled by a single pwm
889  Program sensord: Remove ddcmon support
890  Program sensors: Add ADM1032 support; add messages for sysfs
891  Program sensors-detect: Prefer Super I/O drivers;
892                          Fix W83627HF and W83791D detection; detect CSB6;
893                          Detect ADM1029, ADM1030, ADM1031;
894                          Detect W83637HF, W83697UF;
895                          Add it87 sensor type support; add sysfs support
896                          Reduce lm80 misdetects; remove PCFxxxx "detection"
897                          Detect VT8237 (KT600)
898                          Use VPD instead of DMI+ACPI for Thinkpad detection
899                          Suggest new asb100 driver instead of w83781d
9022.8.1 (20031005)
903  NOTE: Requires i2c-2.8.1 or newer!
904  File Improved adm1025 section
905                        Default temp labels for as99127f
906                        Improved lm83 section
907                        Better support for Asus A7V8X-X
908  File doc/chips/SUMMARY: Add SMSC manufacturer ID
909  File doc/chips/adm1025: Add decent documentation (almost new)
910  File doc/chips/lm83: Known motherboards list update, misc updates
911  Library: Change adm1025 names (hyst/over become low/high)
912           Swap adm1025 temp1 and temp2 to match the driver's order
913           Advance version to 2.0.1
914           Update lm83 support
915           Add support for lm90, xeontemp, max6650
916           Add separate messages for read and write errors
917           Add missing message for parse error
919  Modules (various): Fix includes for compilation on Alpha
920                     Use the new i2c_delay function instead of the various
921                     do_pause functions
922  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
923  Module i2c-nforce2: Cleanups
924  Module i2c-i810: Use readl/writel for portable access to PCI memory
925  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
926  Module i2c-savage4: Use readl/writel for portable access to PCI memory
927  Module i2c-sis630: Fix detection
928                     Add block data read/write support
929  Module i2c-sis645: Detection method change/bugfix
930  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
931  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
932  Module adm1025: Major driver update
933                  Add support for Philips NE1619
934                  Simplify the driver a lot (unified voltages, unified
935                  temperatures and much more)
936                  Fix default voltage limits
937                  Change default temperature limits
938                  Swap remote and local temperatures to match the internal
939                  registers order (make the code unification possible)
940                  Export remote diode fault through alarms
941  Module ddcmon: Major update
942                 Add half a dozen new features
943                 Add checksum parameter (same as for the eeprom module)
944                 Fix monitor limits
945  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
946  Module lm78: Fix a fan_div/fan_min bug
947  Module lm83: Add t_crit and alarms support
948  Module lm90: New
949  Module max6650: New
950  Module saa1064: New
951  Module smsc47m1: Add support for 47M142
952  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
953                   enhance w83627thf support
954  Module w83781d: Enhance chip detection; clean up error returns;
955                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
956  Module xeontemp: New
957  Program Add Direct Rambus (DRDRAM)
958                           Mark Rambus as unsupported
959  Program New
960                          Interfaces between our eeprom module and
961                          parse-edid from the read-edid project
962  Program p4b_smbus: Fix SMP compilation
963  Program sensord: Add support for IT87 (Mike Black)
964                   Change ADM1025 support to match the changes made to
965                   the library
966  Program sensors: Rewrite and enhance EEPROM support
967                   Change LM83 and ADM1025 support to match the changes
968                   made to the library
969                   Add DRDRAM support to print_eeprom
970                   Exit(1) on /proc write failure (Malte Starostik)
971                   Add LM90, MAX6650 support
972  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
973                          Add support for LM82, LM86, LM89
974                          Improved W83781D family detection
975                          Add support for AS19927F rev.2, ASB100 Bach
976                          Add support for Asus Mozart-2 (3 types)
977                          Add support for NE1619
978                          Add support for FSC Hermes
979                          Make sure /sbin is in the user's path
980                          Fix EEPROM detection
981                          Automatic module.conf and /dev/i2c* detection
982                          Improve LM82 and LM83 detection
983                          Handle "to-be-written" cleanly
984                          Add detection for 47M14x Super I/O
985                          Handle the one-address-many-chips-same-driver
986                          case
9892.8.0 (20030714)
990  NOTE: Requires i2c-2.8.0 or newer!!!
991  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
992                  2.4.13 or later required for mkpatch.
993  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
994                  i2c package
995  File doc/chips/fscscy: Add watchdog documentation
996  File Fix vt1211/vt8231 thermistor calculations
997  File sensors.h: Now automatically generated
998  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
999           add adm1026, lm83, lm85, w83791d support;
1000           Advance version to 2.0.0
1001  Makefiles: Generate warnings if new library won't be found by;
1002             Modules now install in kernel/drivers/i2c/[busses,chips];
1003             Ensure that headers in /usr/local/include are used first;
1004             Don't use /usr/include headers for modules;
1005             Handle multiple UTS_RELEASE definitions in linux/version.h;
1006             Automatically generate kernel/include/sensors.h;
1007             Remove old gzipped modules; remove old misc directory if empty;
1008             Remove pre-2.4 installation method;
1009             -Wall now the default;
1010             Add new targets user, user_install, and help;
1011             Run depmod after module installation
1012  Modules (all): Cleanups including
1013                - Add #include <i2c-proc.h>
1014                - C99 initializers
1015                - Remove #ifdef MODULE
1016                - Remove #ifndef THIS_MODULE
1017                - Remove #ifndef MODULE_LICENSE
1018                - Remove other 2.1/2.2 #ifdefs
1019                - Remove #include "sensors.h", copy SYSCTL defs to module
1020                - Remove excess #includes
1021                - Remove argument in i2c_register_entry()
1022                - Remove dummy xxx_command() definition
1023                - Remove EXPORT_NO_SYMBOLS
1024                - Remove init_MUTEX #define
1025                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1026                  no longer adjust their own refcounts
1027                - Use module_init() and module_exit()
1028                - Update to new i2c_driver struct definition
1029  Modules (bus PCI): Convert to PCI-module-style initialization
1030  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1031  Module adm1021: Set alarm on failed reads and report old value;
1032                  merge changes from kernel 2.5.54
1033  Module adm1026: New
1034  Module bmcsensors: Fix compile when DEBUG=1
1035  Modules ddcmon, eeprom: Use i2c block reads if possible;
1036                          better error handling
1037  Module ds1307: Add to Makefile
1038  Module gl520sm: Fix temperature over/hyst writes
1039  Module lm75: merge changes from kernel 2.5.54
1040  Module lm83: New
1041  Module lm85: New
1042  Module i2c-ali1535: Check for invalid transaction
1043  Module i2c-ali15x3: Check for invalid transaction
1044  Module i2c-amd756: merge changes from kernel 2.5.54;
1045                     check for invalid transaction
1046  Module i2c-amd8111: merge changes from kernel 2.5.54
1047  Module i2c-i801: Add support for 82801EB (ICH5)
1048  Module i2c-i810: Fix for some chips
1049  Module i2c-nforce2: New
1050  Module i2c-piix4: Check for invalid transaction
1051  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1052  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1053        north bridges; SiS962 and SiS963 south bridges
1054  Module i2c-viapro: Check for invalid transaction
1055  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1056          pwm and pwm enable support; update docs
1057  Module smbus-arp: Check adapter for HW or SW PEC support;
1058                    add reset option
1059  Module w83781d: Add support for w83791d
1060  Module w83627hf: New
1061  Program Recognize DDR and Rambus
1062  Program eeprom: Fix writes for small eeproms
1063  Program eeprom, eepromer: Use local i2c-dev.h for build
1064  Program fancontrol: New
1065  Program lm_sensors.init: Call sensors -s in start()
1066  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1067                   Add adm1026,lm85 support;
1068                   Remove sensors.c file; add sensors_compat.h;
1069                   Remove patches to i2c-core.c and drivers/char/mem.c;
1070                   Now works only for kernels 2.4.13 or later
1071  Program p4b_smbus: Fix 'make install';
1072                     Install in same place as other modules;
1073                     Clear correct bits in config word
1074  Program pwmconfig: New
1075  Program sensors: add adm1026, lm85, w83791d support
1076  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1077                          w83627hf, w83627thf, w83697hf);
1078                          Add support for SiS651, SiS961, SiS745, SiS746;
1079                          Support dmidecode 2.0 and later;
1080                          Fix "C" format error;
1081                          Add support for adm1026, 82801EB (ICH5), W83791D;
1082                          Add support for w83l785ts, nForce2;
1083                          Fix UTF-8 incompatibility;
1084                          Better support for lm75;
1085                          Add support for lm83
10872.7.0 (20021208)
1088  NOTE: Requires i2c-2.7.0 or newer.
1089  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1090  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1091  File doc/busses/i2c-sis645: Add license
1092  File doc/chips/lm92: Add license, features
1093  File doc/chips/maxilife: Add license, parameters, features
1094  File doc/chips/smartbatt: Complete rewrite
1095  File doc/chips/vt8231: Add license, parameters
1096  File Add section for lm75; complete the lm78 section
1097  Library: Add support for MC1066; add multiple VRM version support for lm87;
1098           enhance adm1023 support; initial support for Sony Vaio eeprom;
1099           add support for bmcsensors; add hacks for additional dummy drivers
1100  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1101            add flags for x86_64 compiles
1102  Module adm1021: Add support for MC1066
1103  Module bmcsensors: New
1104  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1105                   kernel 2.5.43; fix 2.2 kernel compiles
1106  Module gl518sm: Iterate allowed only for rev 0x00
1107  Module i2c-amd756: Configure base address for nForce support;
1108                     check for uninitialized base address;
1109                     add support for amd8111 (SMBus 1.0)
1110  Module i2c-amd8111: New (SMBus 2.0)
1111  Module i2c-ipmb: New
1112  Module i2c-ipmi: New
1113  Module i2c-keywest: Sync with kernel 2.4.20
1114  Module i2c-sis630: Add support for SiS730
1115  Module i2c-sis645: Improve support for SiS645/961;
1116                     add support for SiS645DX/961 and SiS735;
1117                     fix 2.2 kernel compiles
1118  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1119  Module lm87: Add multiple VRM version support
1120  Module vt1211: Fix inx limits and alarms; fix in0
1121  Module vt8231: Fix inx limits and alarms; fix in0
1122  Module w83781d: Fix in0/in1 initialization
1123  Module smartbatt: New
1124  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1125  Program Code cleanup; valid HTML; better HTML output;
1126                           stop decoding on checksum error
1127  Program dmidecode: Fix read bug; upgrade to version 1.8
1128  Program doc-insmod: Complete rewrite; fix author output
1129  Program doc-features: Complete rewrite; handle missing sysctl entries;
1130                        handle unknown prefix with suggestion
1131  Program lm_sensors.init: Remove spaces bug; add green/red output
1132  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1133  Program rrd: Add sanity limits to newly-created RRD.
1134  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1135  Program sensors: Add support for MC1066, Rambus Rimms;
1136                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1137                   initial support for Sony Vaio eeprom
1138  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1139                          IPMI, AMD8111; add help if no sensors found;
1140                          add ACPI method for IBM system detection;
1141                          work with old Perl versions again;
1142                          initial support for Sony Vaio eeprom
11442.6.5 (20020915)
1145  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1146  File Fix temp[23] for as99127f; add vt8231
1147  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1148  Module dmi_scan: new
1149  Module ds1621: Fix enable/disable
1150  Module eeprom: Do not corrupt 24RF08's when checksum=1
1151  Module i2c-i801: Check for uninitialized base address;
1152                   enable if not enabled
1153  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1154  Module i2c-sis630: new
1155  Module i2c-sis645: new
1156  Module lm92: Fix in-kernel initialization
1157  Module via686a: Remove VT8231 support
1158  Module vt8231: new
1159  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1160  Program dmidecode: new
1161  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1162  Program mkpatch: Add entries for, lm92,
1163                   pcf8574, pcf8591, smsc47m1, vt1211;
1164                   add dmi_scan
1165  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1166  Program lm_sensors.init: fix stop()
1167  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1168                   add support for logging loadavg in RRD;
1169                   fix down-converting raw labels for RRD;
1170                   update chip support, still behind sensors
1171  Program sensors: Add /usr/local/etc to config file path;
1172                   fix -c and -u flags; add vt8231
1173  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1174                          refuse to run on IBM systems;
1175                          fix sysconfig module numbering;
1176                          change quick write to not corrupt 24RF08's
11782.6.4 (20020719)
1179  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1180  File doc/vid: New
1181  File include/sensors_vid.h: New
1182  File Add vt1211, smsc47m1
1183  Library: Add multiple VRM version support for adm1025, w83781d;
1184           fix 'flex scanner jammed' on some systems;
1185           add vt1211, smsc47m1, lm92;
1186           fix access mode checking
1187  Makefiles: For 2.4+ kernels, modules now install in
1188             kernel/drivers/[i2c,sensors] , not misc/ , and
1189             'make install' removes old versions in misc/ .
1190             Use $CFLAGS and $CPPFLAGS if defined.
1191  Module adm1025: Add multiple VID version support
1192  Module ds1307: new
1193  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1194                     reliability improvements
1195  Module i2c-hydra: Flush posted writes
1196  Module i2c-i801: Add support for 82801DB (ICH4)
1197  Module i2c-i810: Flush posted writes
1198  Module i2c-savage4: new
1199  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1200  Module i2c-voodoo3: Flush posted writes
1201  Module ds1307: New
1202  Module lm92: New
1203  Module smbus-arp: new
1204  Module smsc47m1: new
1205  Module via686a: Add support for VT8231 sensors
1206  Module vt1211: new
1207  Module w83781d: Add multiple VID version support; fix temp alarms
1208  Program eeprom: new
1209  Program i2cdump: Add smbus block command specification, add PEC support
1210  Program lm_sensors.init: new
1211  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1212                   pcf8574, pcf8591, smsc47m1, vt1211
1213  Program p4b_smbus: Add support for ICH4
1214  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1215  Program sensord.init: Renamed, was prog/init/sensors
1216  Program sensord: Major update, now requires rrd source;
1217                   not compiled by default
1218  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1219                   (don't display algo. and adap.) option;
1220                   add vt1211, smsc47m1, lm92
1221  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1222                          add 82801DB, LM85; fix perl warnings;
1223                          generate /etc/sysconfig/lm_sensors for
1224                          lm_sensors.init script
12262.6.3 (20020322)
1227  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1228  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1229  File doc/chips/it87: add more temp_type help
1230  File Un-ignore it87 in8, temp3, fan3;
1231                        add adm1021 section; add lm87 AIN[1,2] template;
1232                        swap negative voltage limits for 782d,783s,627hf,
1233                        697hf,it87; add more it87 help; swap neg. voltage
1234                        limits for lm78(-j), lm79, w83781d, as99127f
1235  Library: Add PCF8591, W83697HF, ADM1023 support;
1236           fix w83* fan_min computes;
1237           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1238  Module adm1024: Add MODULE_LICENSE("GPL")
1239  Module bt869: Add s-video out and DVD resolution support
1240  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1241  Module fscscy: implement min/max for voltages and fans
1242  Module i2c-amd756: Add support for AMD768
1243  Module i2c-i810: Add support for 810E
1244  Module i2c-keywest: Big update, sync with kernel 2.4.18
1245  Module i2c-piix4: Check for uninitialized base address
1246  Module i2c-sis5595: Blacklist 645, 735
1247  Module i2c-viapro: Check for uninitialized base address
1248  Module gl518sm: Standardize /proc entries in0-3
1249  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1250               fan -> fan1; fix temp2 limit writes
1251  Module pcf8574: Add support for PCF8574A; /proc interface changed
1252  Module pcf8591: new
1253  Module sis5595: Blacklist 645, 735
1254  Module w83781d: Add W83697HF support; allow force_subclients parameter
1255                  for Tyan 2460
1256  Programs, Update for new /proc names
1257  Program new
1258  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1259                   add text output
1260  Program init/sensors: New SysV init script
1261  Program Add support for fscscy, add more help entries
1262  Program p4b_smbus: new
1263  Program rrd: Install summ_week.cgi
1264  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1265                   clean up chassis intrusion prints
1266  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1267                          fix Via686a and it87 detection;
1268                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1269                          fix uninitialized values; it87 beats lm78
12712.6.2 (20011118)
1272  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1273  Chip Modules (all): malloc.h -> slab.h
1274  Modules (all): Add MODULE_LICENSE("GPL")
1275  File doc/FAQ: More updates and additions
1276  File Fix it87 in5,in6 (-12,-5) calculations
1277  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1278           update it87 alarm ID's.
1279  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1280  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1281  Module i2c-amd756: Improve busy handling/printk's
1282  Module i2c-i801: Add 82801CA/CAM support
1283  Module i2c-keywest: Sync with PPC people, it works now
1284  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1285  Module i2c-viapro: Add Via VT8233 support
1286  Module it87: Merge alarm_* /proc entries to alarms
1287  Module sis5595: Fix support for rev B0
1288  Module via686a: Make limit initializations reliable
1289  Module w83781d: Allow init=0 parameter to bypass initialization
1290  Program isadump: Add flat address space (PCI) support
1291  Program Add support for i2c-ali1535, adm1024, ds1621,
1292                      fscpos, it87, maxilife, mtp008
1293  Program sensors: Fix w83781d temp precision
1294  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1295                          Fujitsu Poseidon and Scylla,
1296                          Intel 82443MX and 82801CA/CAM detection,
1297                          add ITE 8172G detection (driver in kernel 2.4.10)
12992.6.1 (20010830)
1300  File BUGS: Updated
1301  File doc/FAQ: More updates and additions
1302  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1303  File Fix/enhance it87 section
1304  Library: ds1621 and it87 updates
1305  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1306  Module i2c-amd756: Add AMD 766 support
1307  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1308  Module i2c-piix4: Add Serverworks CSB5 support
1309  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1310  Module adm1025: Fixed temp2 min/max writes
1311  Module ds1621: Add 12-bit precision mode
1312  Module it87: Enable all alarms, add in8 support, add sensor type selection
1313  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1314                  remove support for module
1315  Module sis5595: Recognize unsupported chips and refuse to load
1316  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1317  Program eepromer: new
1318  Program Fix dependencies on i2c-proc; disallow compilation
1319                      of sensors.c as a module in kernel
1320  Program sensors: it87 updates; adjust temp. precision for some chips
1321  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1322                          recognize unsupported SiS chips;
1323                          recognize AMD 766 and Serverworks CSB5.
13252.6.0 (20010612)
1326  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1327        If your make fails because it can't find <linux/i2c-proc.h>, you
1328        forgot this step!!!
1329  File doc/FAQ: Many, many updates and additions
1330  File doc/busses/i2c-sis5595: new
1331  File doc/busses/i2c-tsunami: new
1332  File doc/chips/it87: new
1333  File doc/chips/via686a: Claim support for 686b.
1334  File README.thinkpad: new
1335  File Adjust as99127f in5 (-12V) and temp2 calculations;
1336                        Add lm87, adm9240, ds1780, lm81 templates;
1337                        Enhance help comments in file;
1338                        Add Tyan S2510 dual-MTP008 example;
1339                        Make separate sis5595 section.
1340  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1341  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1342  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1343           Add support for maxilife-nba and amd1024;
1344           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1345  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1346  Chip Modules (all): Change from sensors_* to i2c_* globals
1347                      for new i2c-proc.[ch]
1348  Makefiles: enhance to support Alpha architecture
1349  Module adm1021: Fix lm84 and gl523sm support
1350  Module adm1024: new
1351  Module i2c-i801: Chip detection cleanup
1352  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1353  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1354  Module i2c-tsunami: New
1355  Module i2c-via: Ensure i2c bus is tristated correctly.
1356  Module it87: new driver for IT8705, IT8712, Sis950 chips
1357  Module lm78: Recognize chipid=0x20
1358  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1359  Module mtp008: Fix temp initializations;
1360                 Save BIOS pin configuration of temps and fans;
1361                 Fix sensor type reads/writes and fan min writes;
1362                 Fix spurious invalid sensor type messages
1363  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1364                  used for patched kernel now.
1365                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1366  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1367                  Allow force_addr=0xaddr
1368  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1369  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1370                  reading changes; Add messages for subclient
1371                  registration failure
1372  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1373  Program i2cset: new
1374  Program isadump: fix for Alpha arch. compiles
1375  Program Fix adm9240 typos; Add more chips to;
1376                      Remove ltc1710; Fix i2c_sis5595 typo;
1377                      Support kernel 2.4.5 makefile change;
1378                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1379  Program sens_update_rrd: new
1380  Program sensord: Add -d (debug) and -p (pid-file) options
1381  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1382                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1383                   Change mtp008 temps from max/min to limit/hyst;
1384                   Add maxilife-nba, adm1024, it87 support.
1385  Program sensors-detect: Recognize lm78 with chipid=0x20;
1386                          Recognize SMSC Victory66 South Bridge;
1387                          Add devfs /dev/i2c/x support;
1388                          Add adm1024, it87xx support; Add thinkpad warning.
1389  Program tellerstats: new
13912.5.5 (20010115)
1392  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1393        you have kernel 2.4.0-prerelease or greater.
1394  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1395  File doc/developers/proc: new
1396  File Add mtp008 entries, adm1025 entries
1397  Library: Add ds1621, mtp008 support
1398  Module adm1021: Add support for adm1021a / adm1023
1399  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1400  Module adm1025: Add support for remote temp; rename /proc entries to
1401                  in[0-5] and temp[1-2]; fix negative temp readings
1402  Module adm9240: Rename /proc entries to in[0-5]
1403  Module ddcmon: allow force and force_ddcmon parameters
1404  Module ds1621: new
1405  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1406  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1407  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1408  Module lm87: cleanup, update voltage calculations
1409  Module mtp008: new
1410  Module pcf8574: change update time to 5 seconds
1411  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1412  Module w83781d: fix beep setting via /proc
1413  Programs editticket, readticket: new
1414  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
1415  Program more fixes; now adds many more modules
1416  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1417                   add adm1025 temp2; report temp limits correctly as
1418                   min/max or limit/hysteresis; print message if no
1419                   sensors are found. Removed false errors from lm87 reads.
1420  Program sensors-detect: Add ds1621, mtp008 detection;
1421                          add ServerWorks detection
14232.5.4 (20001012)
1424  Module i2c-viapro: Add support for Via 596B (0x3051)
1425  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1426  Program fixed infinite loop
1427  Program sensors-detect: Detect Via 596B (0x3051)
14292.5.3 (20001008)
1430  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1431  File useful_addresses.html: update
1432  Library: Add lm87 support
1433  Module pcf8574: new
1434  Module i2c-ali1535: new
1435  Module i2c-ali15x3: removed force #ifdef.
1436  Module i2c-i801: support Intel 82801BA (815E chipset)
1437  Module i2c-i801: add i2c block write support, fix smbus block bugs
1438                   (requires i2c 2.5.3 package)
1439  Module i2c-i810: support Intel 82815
1440  Module lm87: new
1441  Module sensors: Fix for kernel 2.4.0-test8
1442                  (remove copy_to_user_ret and put_user_ret)
1443  Module w83781d: limit fan divisors to 8 max. for as99127f
1444  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1445  Program i2cdump: Add smbus block read support
1446  Programs i2cdetect, i2cdump: Improve error reporting
1447  Program sensors: new switch -u (--unknown)
1448  Program sensors-detect: detect Intel 82801BA (815E chipset)
1449  Program sensors-detect: detect Intel 82815
1450  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1451  Program sensors-detect: detect National LM87
1452  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1453  Program sensors-detect: Improve error reporting
14552.5.2 (20000709)
1456  File Fix lm80 in8 calculation
1457  Module w83781d: W83783S no longer crashes on unloading
1458  Program sensors-detect: more robustness in case of unknown i2c adapters
1459  Program sensors-detect, libsensors: fix eeprom size reporting
1460  Program sensord: more flexibility, support for alarm scanning etc.
1461  Program sensors: support for ignore setting on sensor alarms.
1462  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
14642.5.1 (20000618)
1465  Library: Add adm1025 support
1466  Module adm1025: new
1467  Module ddcmon: Fixed bus scan which could hang SMBus
1468  Module i2c-keywest: new
1469  Module maxilife: Add support for Maxilife '99 (NBA)
1470  Module via686a: Enable sensors if not enabled by BIOS
1471  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1472  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1473  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1474  Module w83781d: Fis as99127f fan speed (was 66% too high)
1475  Module w83781d: Improve beep input checking
1476  Program i2cdump: Add Winbond-style bank selection
1477  Program isadump: Add Winbond-style bank selection
1478  Program sensors: Add adm1025 support.
1479  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1480  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1481  File Add Maxilife '99 entries
1482  File Remove some as99127f entries.
1483    Note: For as99127f, reinstall manually (make install
1484          won't reinstall it) or else 'sensors -s' will fail.
14862.5.0 (20000312)
1487  Dropped all kernel 2.0 and 2.1 compatibility
1488  Module i2c-i810: new
1489  Module ddcmon: new
1490  Module via686a: new
1491  Module i2c-amd756: fixed region request
1492  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1493  Module w83781d: Don't change pin settings at initialization;
1494                  also fix chip detection.
1495  Library: Support for ddcmon and via686a
1496  Program sensors-detect: Support for ddcmon and via686a
1497  Program sensors: Support for eeprom, ddcmon and via686a
14992.4.5 (20000116)
1500  Introduced DESTDIR installation prefix
1501  Module lm80: fixes, temperature now read and set correctly
1502  Module i2c-voodoo3: driver enhancements
1503  Module w83781d: fixes, AS99127 works much better now
1504  Library: New ignore keyword in config file
1505  Programs: Support for new ignore keyword
1506  Program sensors-detect: Support for MGA detections
15082.4.4 (19991201)
1509  Addition of the alpha release of AMD 756 SMBus host support.
1510  Many fixes and updates to the gl518sm driver
1511  Updates and fixes for device detection
15132.4.0 (19990920)
1514  Too much to list.
1515  i2c and smbus parts are split off to a separate i2c package.
1516  New drivers and other stuff.
15182.3.4 (19990616)
1519  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1520  All: Now compiles against kernel 2.0.x (again ;)
1521  Module gl518sm: some updates and refinements
15232.3.3 (19990603)
1524  All: Now compiles against kernel 2.3.x (x >= 1)
1525  Module i2c-voodoo3: Timing issue fixes
1526  Module bt869: Seems to be functional and relatively well tested
1527  Many modules were modified to be more compatible with the new
1528   Mutex structure in the new experimental kernels.
15302.3.2 (19990507)
1531  Module i2c-hydra: Now compiles on 2.0.x kernels
1532  Module i2c-lm75: Slightly better detection
1533  * New, but not compiled by default:
1534  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1535  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
15372.3.1 (19990501)
1538  All: Now compiles on PPC
1539  Module i2c-hydra: NEW
1540  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1541  Module w83781d: Removed deadlock (mutex was not initialized)
1542  Documentation: A few glitches removed
1543  Makefile: default module installation directory is now
1544            /lib/modules/current/extra/misc
1545  Program sensors-detect: PPC Hydra now detected
1546  Program sensors: Now prints complete GL518SM information
1547  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
15492.3.0 (19990422)
1550  All: Many, many changes and improvements
1551  All: Many small bugs and problems removed
1552  Modules: New insmod parameters
1553  Modules: Much improved chip detection
1554  Module maxilife: NEW
1555  Module adm1021: MAX1617A now also supported
1556  Module adm9240: DS1780 now also supported
1557  Module w83781d: W83782D and W83783S now also supported
1558  Program sensors-detect: NEW
1559  Library: All chips now supported
1560  Documentation: Very much improved
15622.2.2 (199903??)
1563  Just some minor updates and bug fixes.
15652.2.1 (19990218)
1566  All: Removed compile warnings
1567  Module i2c-dev: Small bug removed if DEBUG=1 was used
1568  Module sis5595: Now compiles for 2.0 kernels
1569  Module adm1021: Detection corrected
15712.2.0 (19990216)
1572  All: Set copyrights to include 1999
1573  All: Small bugfixes
1574  I2C: Upgraded to newest archive of Simon Vogl
1575  Module i2c-dev: NEW
1576  Module i2c-ali15x3: NEW
1577  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1578     directories, and somewhat improved
1579  Module sis5595: NEW
1580  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1581  Library: Support for new chip drivers, several small bugs fixed
1582  Library manual pages: NEW
1583  Program i2cdetect: Moved to detect directory
1584  Program NEW
1585  Program doc-features: NEW
1586  Program sensors: Added man-page
1587  Document BUGS: Added cdrom bug and kernel i2c conflict
15892.1.2 (19990116)
1590  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1591  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1592  Documentation in doc/kernel: NEW
15942.1.1 (19990107)
1595  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1596                     and older
1597  Module gl518sm.o: Miscelaneous bugs and problems solved
1598  Program isadump: NEW
16002.1.0 (19981230)
1601  Library: Completely NEW
1602  Program sensors: NEW
1603  Program grab_busses: NEW
1604  Program decode-dimms: More information
1605  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1606  Module w83781d.o: NEW
1607  Module lm80.o: NEW
1608  Module gl518sm.o: new procfile beep, several small updates
1609  Modules: Now use pin readings, no more scaling within the kernel (use the
1610           library instead)
16122.0.2 (19981214)
1613  Module eeprom.o: NEW
1614  Program decode-dimms: NEW
1615  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1616           2.1.58
1617  Modules: Somewhat less verbose on transfers
1618  Module lm78.o now recognizes and handles lm78-j and lm79
16202.0.1 (1998121?)
1621  Module gl518sm.o updates, to make it actually work
1622  Module lm75.o high/low-byte swapping write bug fixed
16242.0.0 (19981209)
1625  Initial release
Note: See TracBrowser for help on using the browser.