root/lm-sensors/branches/lm-sensors-3.0.0/CHANGES @ 4385

Revision 4385, 79.5 KB (checked in by khali, 8 years ago)

doc/version-2: Delete, obsolete.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
5  File doc/version-2: Delete, obsolete
6  File Add a dme1737 section
7  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
8  File README.patches: Delete, obsolete
9  Library: Clean up pwm symbol names translation
10           Add dme1737 support
11  Man page sensors.conf.5: Update the chip statement section
12  Program isadump: Detect when address bit 7 is a busy flag
13  Program mkpatch: Delete
14  Program pwmconfig: Use smaller steps for low PWM values
15  Program rrd: Support only hwmon class devices
16               Look for rrd in /usr/bin by default
17               Add missing shell declarations
18               Update URI
19  Program sensors: Drop ddcmon and eeprom support
20                   Add dme1737 support
21  Program sensors-detect: Stop Super-I/O probe after first family success
22                          Fix SMSC DME1737 detection
23                          Add /usr/sbin to the PATH (#2199)
262.10.3 (20070319)
27  Library: Do not skip i2c adapters with only a class device and no
28            physical device. This change is required to survive the
29            planned struct class_dev removal from future 2.6 kernels.
30           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
31           Recognize i2c-isa-based devices as such even after class_dev
32            is gone
33           Compile with -D_REENTRANT
34           Fix support of Linux 2.6's max6650 driver
35           Fix max1619 support
36  Man page i2cdetect.8: Scanning range can be restricted
37  Module bmcsensors: Fix debugging messages
38  Module i2c-ali1563: Improve the status messages (2.6 backport)
39                      Fix device initialization (2.6 backport)
40  Module i2c-amd8111: Cleanups (2.6 backport)
41                      Fix initialization race (2.6 backport)
42  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
43  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
44  Module i2c-viapro: Add CX700 support (2.6 backport)
45  Module smsc47m1: Add SMSC LPC47M292 support
46                   Get rid of a useless semaphore (2.6 backport)
47  Programs i2cdetect, i2cdump, isadump: Flush output in real time
48  Program i2cdump: Cleaner output in SMBus block read mode
49  Program Fix pwmN_enable access (#2190)
50  Program sensors: Add smsc47m2 support (fans)
51                   Fix -A option (hide adapter name) on error
52  Program sensors-detect: Only probe relevant I2C addresses
53                          Drop ARP-capable device detection
54                          Add Maxim MAX6655/MAX6656 detection
55                           (Olexiy Avramchenko)
56                          Add Maxim MAX1668, MAX1805, MAX1989 detection
57                          Add VIA CX700 detection
58                          Drop legacy W83627HF ISA detection
59                          Don't bufferize stdout during probes
60                          Speed up the LM75 and LM77 detection
61                          Clean up the EEPROM detection
62                          Add Dallas DS75 detection
63                          Add SMSC LPC47M292 detection
64                          Add nVidia MCP61 and MCP65 detection
65                          Fix ADM1028 detection
66                          Add Nat. Semi. PC8347L Super-I/O detection
67                          Add SMSC SCH5504 Super-I/O detection (no sensors)
68                          Make the LM78 and W83781D detection safer
712.10.2 (20070115)
72  RPM: Obsolete, removed
73  File doc/fan-divisors: Update
74  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
75  Library: Add support for the pc87247 driver (fans only)
76           Probe for busses before chips
77           Drop support for algorithm names
78           Add support for coretemp driver   
79           Major update/optimization of config-file scanner
80           Add config-file scanner regression tests
81           Add f71872f support
82           Add w83627dhg support (David Holl, #2157)
83           Get the i2c adapter names from
84           Add adm1029 support (Corentin Labbe)
85  Man page i2cdetect.8: Describe the output convention
86  Man page sensors.1: Update (option -c) and clean up
87  Module bmcsensors: Fix several warnings
88                     Fix fragile structure initialization
89  Module i2c-i801: Add ICH9 support
90  Module p4b_smbus: Add support for the ICH5
91  Module f71805f: Fix the device address decoding (2.6 backport)
92  Module icspll: Delete. It was useless and dangerous.
93  Program Remove spaces at end of lines
94  Program eepromer: Fix loads of warnings
95  Program i2cdetect: Make the output clearer
96  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
97  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
98                            without need of recompilation.
99  Programs dump/*: More robust handling of user inputs
100  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
101                                  Add support for non-i2c drivers
102  Program Disable debugging by default
103                         Add support for non-i2c drivers
104                         More tolerant config file parsing
105  Program sensord: Add pc87247 support (fans only)
106                   Add vt1211 support (#2150)
107                   Add w83627dhg support (David Holl, #2157)
108                   Add w83627ehf voltage support (Dave Platt)
109                   Add k8temp support (Dave Platt)
110  Program sensors: Add pc87247 support (fans only)
111                   Hide error on missing f71805f fan
112                   Handle option -c more efficiently
113                   Drop option -a (show algorithm names)
114                   Add f71872f support
115                   Add w83627dhg support (David Holl, #2157)
116                   Add adm1029 support (Corentin Labbe)
117                   Hide error on missing w83793 temp (Gong Jun)
118  Program sensors-detect: Add SMSC DME1737 detection
119                          Add Fintek F71882FG and EPoX EP1308 detection
120                          Add Intel Core thermal sensor detection
121                          Preallocate memory for I2C_FUNCS ioctl (#2138)
122                          Prevent misdetection of MAX6633/MAX6634/MAX6635
123                          Add Intel ICH9 detection
124                          Add Maxim MAX6648/MAX6692 detection
125                          Improve ADM1029 detection
126                          Add Andigilog chips detection
127                          Add Intel AMB FB-DIMM thermal sensor detection
128                          Add ATI SB600 detection
1312.10.1 (20060924)
132  File doc/developers/checklist renamed to dev/developers/release_checklist
133          with clarifications and updates for new SVN server.
134  File README.package: Delete.
135  File doc/busses/i2c-piix4: Update (2.6 backport)
136  File doc/developers/sysfs-interface: Update
137  File etc/ Add an smsc47m192 section
138                            Comment out all set statements
139                            Add an it8716 section
140                            Add a w83793 section
141                            Adjust the vt1211 section to match the new driver
142                             interface
143  Library: Fix device scan when no i2c support is present
144           Add support for W83627EHF voltage inputs and alarms
145           Add support for the smsc47m192 driver
146           Fix all memory leaks (yeah!)
147           Fix no sensors being reported as an error
148           Add support for the IT8716F and IT8718F chips
149           Add support for the W83793 chip (Yuan Mu)
150           Map the 2.6 adm1026's fan8 to fan0
151           Missing sysfs busses and classes are not errors
152           Change vt1211 temp3-7 magnitude from 1 to 3
153  Makefile: Don't grep autoconf.h on user-space targets
154            Fix depmod on non-running kernel version
155            Remove empty include directories on make user_uninstall
156  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
157  Module i2c-amd756-s4882: Improve static semaphore initialization
158                           (2.6 backport)
159  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
160                   Add ICH8 support (2.6 backport)
161                   Fix block transaction poll loops (2.6 backport)
162                   Remove PCI function check (2.6 backport)
163                   Cleanups (2.6 backport)
164  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
165  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
166                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
167                    Drop the fix_hstcfg parameter (2.6 backport)
168  Module i2c-viapro: Fix compilation with kernels < 2.4.21
169                     Add VT8237A and VT8251
170  Module lm83: Add LM82 support (2.6 backport)
171  Module vt1211: The VT1211 has no in6
172                 Rework the voltage and temperature conversions and the
173                  temperature input order to match the Linux 2.6 driver
174  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
175                  Add specific alarm and beep defines for the W83791D
176  Module w83792d: Fix PWM range (2.6 backport)
177  Program Decode depending on the memory type
178                           Decode the manufacturing date to an ISO8601 date
179                           Add the memory size computation and provide brief
180                            timing characteritics for SDRAM/DDR/DDR2 memory
181                           Add memory size computation for Rambus memory
182                           Various output cleanups and fixes
183  Program Add /usr/sbin or /usr/local/sbin to $PATH if needed
184  Program Detect and skip false positives
185  Program i2cdetect: Add a mode to print adapter functionalities
186  Program i2cdump: Restore bank after bank switching
187                   Add new mode W (read word on even register addresses)
188  Program mkpatch: Fix typo breaking f71805f
189                   Turn warnings on (-w), and fix them
190                   Print a usage message on missing command line parameters
191  Program pwmconfig: Use mktemp instead of tempfile
192  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
193                   Add smsc47m192 support
194                   Add abituguru support (Hans de Goede)
195                   Fix memory leak when printing an unknown chip
196                   Add it8716 and it8718 support
197                   Make each it87 fan and fan div optional
198                   Print missing w83791d values
199                   Add w83793 support (Yuan Mu)
200                   The adt7463 may not have in4 (#2119)
201                   Hide more vt1211 missing input errors
202                   Clearer error messages when no sensors found
203  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
204                          Add ATI IXP200/300/400 SMBus detection
205                          Prevent warning on 64-bit PCI addresses
206                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
207                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
208                           F75384S/M, F75387SG/RG and F81218D detection
209                          Add Winbond W83793R/G and W83627DHG detection
210                          Handle the W83791D driver difference between kernels
211                          Add nForce4 MCP04, MCP51 and MCP55 detection
212                          Add AMD Geode devices detection
213                          Add ITE IT8716F and IT8718F detection
214                          Add NatSemi/Winbond PC87427 detection
215                          Get driver information for busy addresses from
216                           sysfs (2.6 only)
217                          Drop the ISA IT87xxF detection
218                          Check i2c adapter functionalities before probing
219                          Add Intel ICH8 SMBus detection
220                          Add AMD K8 thermal sensors detection
221                          Simplify detection of SiS5595, VIA686 and VT8231
222                          Add Analog Devices ADM1033, ADM1034, ADT7462,
223                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
224                          Check for root user at startup
225                          Attempt to be slightly more user-friendly
226                          Add VT8237A and VT8251
227                          Remove detection of nVidia graphics adapters
228                          Use sysfs for PCI device enumeration
229                          Add generic PCI SMBus adapter detection
230                          Add generic Super-I/O logical device detection
231                          Add SMSC LPC47M172/182 detection
2342.10.0 (20060214)
235  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
236  File doc/busses/i2c-viapro: Update (2.6 backport)
237  File doc/chips/via686a: Update (2.6 backport)
238  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
239  File etc/ Do not set vrm by default
240  File i2c-dev.h: Fix union i2c_smbus_data definition
241                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
242                  Add missing parentheses around macros
243                  Drop I2C_FUNC_SMBUS_EMUL
244                  Drop I2C_FUNC_SMBUS_*_PEC
245                  Drop I2C_SMBUS_*_PEC
246  File sensors_vid.h: Drop default VRM
247  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
248           This is intentional.  Use if you still
249           need your memory SPD data.
250  Library: Big update to use libsysfs.  More TODO though.
251           Fix bus matching code for Linux 2.6 (Karsten Petersen)
252           Add f71805f, w83687thf support
253           Add platform drivers support
254           Fix sysctl warnings on x86_64
255           Restore vt1211 temp1
256  Makefile: Compile user-space programs with -Wundef
257  Module i2c-i801: Simplify the hardware PEC code
258                   Always set PEC mode explicitly before each transaction
259  Module i2c-i810: Documentation update, PCI IDs cleanup
260  Module i2c-keywest: Remove bus probing code (2.6 backport)
261  Module i2c-nforce2: Remove dead code (2.6 backport)
262                      Add the ID of the nForce4 MCP-04 (2.6 backport)
263  Module i2c-via: Remove dead code
264  Module i2c-viapro: Remove dead code
265                     Support I2C block read (2.6 backport)
266                     Code cleanups (2.6 backport)
267                     Improve debug register dump (2.6 backport)
268  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
269          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
270          i2c-sis645: Use pci_driver name to request I/O region; do
271                      not initialize i2c_adapter name to "unset" (2.6
272                      backport)
273  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
274                                              (2.6 backport)
275  Module adm9240: Cleanups (2.6 backport)
276  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
277  Module it87: Minor cleanups
278               Fix fan3_div setting bug (Anton V. Staaf)
279  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
280               Separate the register read function
281               Add PEC support for the ADM1032
282  Module via686a: Cleanups
283  Module w83627hf: Drop useless initialization step (2.6 backport)
284                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
285                   Fix alarms (Yuan Mu)
286                   Preserve fan min on fan div change (Yuan Mu)
287                   Properly handle W83627THF without VID (Yuan Mu)
288                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
289                   Add W83687THF support
290  Module w83781d: Drop W83697HF support (Grant Coady)
291  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
292                  Fix fan control mode (PWM/DC) reporting
293                  Fix fan div auto-adjust (Yuan Mu)
294                  Fix the subclient handling
295  Module w83l785ts: Minor cleanup (2.6 backport)
296  Module vt1211: Restore temp1
297  Modules vt1211, vt8231: Change default VRM to 9.1
298  Program Add lookup tables for manufacturer names
299                           Fix rounding error in PCxxxx speed computation
300                           Improve text output
301                           Improve speed under Linux 2.6
302                           Verify checksum before decoding anything
303                           Improve manufacturing location decoding
304                           Improve memory type detection
305                           Improve part number decoding
306  Program i2cdump: Drop now useless #ifdef tests
307                   Fix capability check for continuous byte mode
308  Program i2cget: New
309  Program i2cset: Add PEC support
310                  Fix argc check
311  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
312                                       Print the correct bus type if bus
313                                       functionality can be queried
314  Program isadump: Display the real addresses in flat mode
315  Program Silently skip already existing nodes
316  Program mkpatch: Include f71805f
317  Program sensord: Do not log algorithm names
318                   Drop EEPROM support (Aurelien Jarno)
319                   Add W83627EHF, F71805F/FG support
320                   Fix PC87365/PC87366 alarms
321  Program sensors: Drop free_the_label
322                   Fix compilation with uclibc (no iconv)
323                   Add f71805f, w83687thf support
324  Program sensors-detect: Drop algorithm names
325                          Do not rely on i2cdetect -l printing algo names
326                          Simplify adapter name matching mechanism
327                          New address for ADM1032, ADT7461
328                          Improve ADT7467, ADT7468 support
329                          Fix MAX6659 reported driver
330                          Add Fintek F71805F detection
331                          Add Analog Devices ADT7476 detection
332                          Add Intel 82845G detection
333                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
334                          Fix udev detection in some corner case
335                          Improve DS1621 detection
336                          Always prefer ISA access over SMBus access
3392.9.2 (20050906)
340  File doc/chips/*: Big update (2.6 backport)
341  Library: Drop ds1780-specific code (now use adm9240)
342           Fix memory leak in sensors_get_label()
343           Support /sys/class/hwmon (Linux 2.6.14+)
344           Limit stack usage in sensors_read_proc_chips()
345  Makefile: Detect 2.6+ kernels and check targets
346  Man page isaset.8: Fix typos
347  Module adm1031: Fix broken kfree() calls
348  Module i2c-ali1563: New (2.6 backport by Winbond)
349  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
350  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
351          w83627hf.c: Tag find function __init
352  Module lm93: Fix memory leak
353  Module smsc47m1: Fix PWM enable polarity on read
354  Modules w83627hf, w83781d: Allow setting fan divisor to 128
355  Program Support Linux 2.6 (Burkart Lingner)
356                           Added DDR/DDR2 frequency reporting in convenient
357                           form of DDRxxx PCyyyy
358  Program i2cdump: Properly handle short i2c block reads
359  Program Fix compile errors
360  Program mkpatch: Include i2c-ali1563
361                   Include w83792d
362  Program pwmconfig: Fix unsafe temporary file use
363  Program rrd: Support 2.6 kernels
364  Program sensord: Add support for w83637hf
365                   Support pc87360 (Henrik Brix Andersen)
366  Program sensors: Support the VAIO "VGN" prefix for eeprom
367  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
368                          Advertise the w83792d driver
369                          Improve IT8705F and IT8712F detection
370                          Merge LM82 and LM83 detection
371                          Add W83687THF detection
3742.9.1 (20050412)
375  File doc/busses/i2c-nforce2: Update
376  File doc/chips/it87: Update
377  File doc/chips/lm90: Update for adt7461
378  File doc/chips/mic74: New
379  File etc/ New sections for lm92 and w83792d
380  Library: Add support for 2.6 fscpos driver (Stefan Ott)
381           Fix sis5595 in4 (Aurelien Jarno)
382           Add support for 2.6 gl520sm driver (Maarten Deprez)
383           Add support for 2.6 bmcsensors driver (Yani Ioannou)
384           Add support for w83792d (Chunhao Huang/Winbond)
385           Add support for 2.6 adt7461 (James Chapman)
386           Add support for 2.6 lm92
387           Add support for 2.6 vt1211
388           Add preliminary support for 2.6 w83627ehf
389  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
390            Use -fno-strict-aliasing on all architectures
391  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
392  Module bmcsensors: Fix compile error
393                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
394  Module ds1621: Fix detection (Aurelien Jarno)
395  Module eeprom: Discard SPD-centric checksum module parameter
396                 Cleanup detection function (backport from Linux 2.6)
397  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
398  Module i2c-i801: Temporarily disable broken I2C block read
399  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
400                   Gelato)
401  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
402  Module i2c-viapro: Prevent repeated resets
403  Module it87: Improve Super-I/O detection
404               Limit I2C address range
405               Support VID on the IT8712F
406  Module lm75: Only initialize CMP/INT bit
407  Module lm78: Fix bug with setting negative temperature limits
408  Module lm85: Properly differentiate between ADM1027 and ADT7463
409               Add EMC6D102 support
410  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
411               Add limited ADT7461 support
412  Module lm93: Fix IN10 (+5V) scaling
413  Module mic74: New
414  Module w83627hf: Support secondary Super-I/O address
415                   Enable temp2 and temp3 if they are disabled
416  Module w83781d: Revert AS99127F temp2 and temp3 computation change
417                  Skip final initialization step for AS99127F chips
418  Module w83792d: New (Chunhao Huang/Winbond)
419  Program ddcmon: New; user-space replacement for the ddcmon driver
420  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
421  Program isadump: Handle Super-I/O keys
422  Program lm_sensors.init: Cleanups (Axel Thimm)
423  Program Add basic command-line interface
424  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
425  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
426                     Don't complain about read-only enable files (lm85)
427                     Fix handling of alternate config file name
428  Program sensord: Fix erroneous error message (Aurelien Jarno)
429                   Support sis5595 in4 (Aurelien Jarno)
430                   Support w83627thf
431                   Support the separate it8712 prefix (Aurelien Jarno)
432  Program sensors: Display sis5595 in4 (Aurelien Jarno)
433                   No errors on missing pc87360 fans
434                   Add gl520sm support (Maarten Deprez)
435                   Improve vt1211 error/ignore handling (Michael Carland)
436                   Support w83792d, w83627ehf
437  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
438                          Improve IT8705F and IT8712F detection
439                          Improve udev detection
440                          Fix DS1621 detection
441                          Add W83627EHF detection
442                          Add ATI SMBus detection
443                          Add VT1211 alias detection
444                          Warn if chip modules not found
445                          Add i2c-ipmi to list if bmcsensors is on it
446                          Add PC87591 detection
447                          Search for correct udev db file name
448                          Add nForce3 250Gb and nForce4 detection
4512.9.0 (20041228)
452  NOTE: Requires i2c-2.9.0 or newer!
453  File README.thinkpad: Update
454  File doc/chips/it87: Cleanups
455  File doc/chips/lm63: New
456  File etc/ Set via686a voltage limits
457  File kernel/chips/ Resync module list with mkpatch
458  File kernel/include/sensors_compat.h: Define __devexit_p if missing
459                                        (kernels 2.4.16 and older)
460  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
461                             and dec_use removed in release 2.8.0
462  Modules (all chip drivers): Remove owner from i2c_driver; pass
463                              controlling_mod to i2c_register_entry() again
464  Module bmcsensors: Support function 1/x
465  Module i2c-amd756: Display the real bus name
466  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
467  Module i2c-i801: Support i2c block read (ICH5 and higher)
468                   Add PEC support for ICH6
469                   Add support for ICH7
470  Module i2c-ipmb: Remove from build since it doesn't work
471  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
472  Module icspll: Fix compilation
473  Module lm63: New driver for the National Semiconductor LM63
474  Module lm83: Use signed types for temperatures
475               Check limits on register writes
476  Module lm87: Round voltages properly
477               Retry on read errors (David Knierim)
478               Less agressive init (no reset)
479  Module lm90: Use signed types for temperatures
480               Check limits on register writes
481  Module lm93: Added module parameter for VID pin input thresholds.
482               Fix typo in dynamic VID alarms
483               Adds a couple log messages for failed transactions (David
484               Knierim)
485               Fix compilation breaking C99-ism (Axel Thimm)
486               Fix block read retries
487  Module pc87360: Support secondary Super-I/O address
488  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
489  Library: Add lm63 support
490           Add lpc47b397 support
491  Programs *.init: Rename lockfile to match file name
492  Programs i2cset, isaset: Written byte/word can be masked
493  Program Find eeproms on non-0 i2c bus too
494  Program mkpatch: Include i2c-amd756-s4882
495  Program pwmconfig: Handle new (well, back to old) pwm files names for
496                     Linux 2.6.10 and up
497  Program sensord: Do not scale load average (Aurelien Jarno)
498  Program sensors: Add lm63, lpc47b397 support
499                   Support DDR2 memory module EEPROMs (Rudolf Marek)
500                   Support only one location for the default configuration file
501                   Display the default configuration file location in --help
502                   Simplify the configuration file opening code
503  Program sensors-detect: Improve LM63 detection
504                          Discard IBM Thinkpad detection code
505                          Add PCA9556, LPC47B397, ICH7 detection
506                          Fix W83792D detection, add W83791SD detection
5092.8.8 (20041007)
510  File doc/donations: Update
511  File doc/lm_sensors-FAQ.texi: Add 4.6.1
512                                Update 4.7
513  File doc/chips/gl518sm: Update "iterate" info
514  File doc/chips/it87: Discard outdated module parameters
515  File doc/chips/lm75: LM77 is not supported
516  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
517  File doc/chips/lm93: New
518  File doc/chips/w83l785ts: Improvements
519  File etc/ Fix it87 lines order
520                            Update lm87 section
521  File kernel/include/sensors_vid.h: Support VRM 10.0
522  Library: Support 2.6 adm1025
523           Preliminary support for 2.6 lm87
524           Support 2.6 adm9240
525           Allow an alternative sysfs file name for chip features (2.6)
526           Fix lm83 critical limits (2.6)
527           Add lm93 support
528           Prevent some procfs errors from being silently ignored
529  Makefiles: Implement user_uninstall (Rudolf Marek)
530             Spoof LOGNAME and HOSTNAME when making html man pages
531  Module adm1025: Refine detection
532                  Update limit registers again (revert of 2.8.1)
533                  Init high limits if they read 0
534                  Fix conversions
535  Module lm75: Refine detection
536  Module lm78: Fix init
537  Module lm83: Default to kind lm83 if forced.
538               Fix temperature macros.
539  Module lm90: Add LM86, MAX6657 and MAX6658 support
540  Module lm93: New
541  Module mtp008: Fix the setting of limits on temp2
542  Module pca9540: Refine detection
543  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
544                  Support VID
545                  Fix fan_div file when fan count is less than 3
546                  Additional init and debug
547  Module smsc47m1: Fix pwm_enable being inverted
548  Module w83627hf: Add alternate VCORE/in0 calculation method
549                   Remove reset of chip by driver on initialization
550  Module w83781d: Fix default VRM for w83791d
551  Module w83l785ts: Implement read error handling (backport from 2.6)
552  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
553                    Wait for user input to continue (as opposed to 5 sec
554                    delay), can be skipped with -y
555                    Various cleanups and code refactoring
556                    Update manual pages
557  Program fancontrol.init: New (Dean Takemori)
558  Program Restore fans on many kinds of errors/interrupts
559  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
560                           (Giuseppe Della Bianca)
561  Program Detect devfs and refuse to run
562                    Use mknod's mode instead of chmod
563  Program mkpatch: Include xeontemp and pc87360
564  Program sensors: Rework adm1025 support
565                   Display pc87365/pc87366 VID
566                   Improve smsc47m1 support
567                   Hide 2.6 adm1027 alarm_mask being missing
568                   Print VRM version for all supported chips
569  Program sensors-detect: Support LM93, LM77, LM63
570                          Support PC8739x Super-I/O family (no sensors)
571                          Fix PCA9540 support
572                          Refine ADM1025/ADM1025A detection
573                          Refine LM75 detection
574                          Ignore missing /proc/modules (Andras Bali)
575                          Script-wide Perl cleanups
576                          Support udev
577                          Support W83792D, LM96000
5802.8.7 (20040611)
581  File README.thinkpad: Update 24RF08 status
582  File doc/fan-divisors: More info on accuracy
583  File doc/lm_sensors-FAQ.texi: Update 4.27
584  File doc/chips/adm1031: New
585  File doc/chips/max1619: New
586  File doc/chips/pc87360-fan: Renamed to pc87360
587  File doc/chips/pc87360: Big update
588  File doc/chips/w83781d: Update AS99127F documentation
589  File etc/ Add comments about BP6 voltages
590                            Add comment on Asus A7V8X-X VCore
591                            Misc fixes to lm80 section
592                            Update via686a section
593                            New lm99 section
594                            Add section for LM85-like chips
595                            Preliminary pc87366 section
596                            Add comment on GL520SM application modes
597                            Document beep_enable (Aurelien Jarno)
598                            Preliminary max1619 section
599                            Preliminary adm1030 and adm1031 sections
600  Library: Fix 2.6 VRM
601           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
602           Fully support the PC87360 family
603           Support the lm99
604           Add version and date strings
605           Support 2.6 max1619
606  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
607  Man page i2cdetect.8: document new command line flags
608  Man page i2cdump.8: More details on how i2cdump can write to a chip
609  Modules (all chip drivers): Rework memory allocation scheme.
610  Module adm1031: New (Alexandre d'Alton)
611  Module bmcsensors: Fix oops by creating thread for initialization
612  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
613  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
614          asb100.c, lm92.c: Use swab16
615  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
616  Module gl520sm: Less agressive initialization process
617                  Fix temp1 limits being unsettable in application
618                  Ensure that temp2 and in4 are not used at the same time
619  Module i2c-i801: Support 6300ESB and ICH6
620  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
621  Module i2c-sis645: Add support for SiS655
622  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
623  Module lm90: Support LM99 and LM89
624  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
625               Get rid of useless i2c_probe call
626  Module max1619: New (Alexey Fisher)
627  Module p4b_smbus: Add support for mobile versions of the 82801
628                    (Axel Thimm)
629  Module pc87360-fan: Renamed to pc87360
630  Module pc87360: Also support PC87365 and PC87366
631                  Add write support
632                  Correctly set the chip name depending on the type
633                  Add voltage and temperature support
634                  Fix fan speed computation
635                  Retrieve fans configuration from Super-I/O space
636                  Export pwm_enable (read-only)
637                  Honor pwm invert bits
638                  Clear fan alarms after we read them
639                  Do not read fan data when monitoring is disabled
640                  Do not include SENSORS_INSMOD stuff
641                  New module parameter: init
642                  Fan clock dividers change automatically
643                  Add thermistor dupport
644  Module smsc47m1: Lock on reads and writes
645                   Various PWM fixes
646  Module thmc50: Fix address range
647  Module via686a: Fix voltage roundings
648                  Simplify temperature conversions
649  Module w83781d: Drop PWM support for as99127f
650                  Invert AS99127F beep bits in driver rather than user-space
651  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
652  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
653  Program New
654  Program i2cdetect: Adapt probing method to address
655                     Add -q and -r flags to force probing methods
656                     Allow probing range selection
657  Program isadump: Major improvements
658  Program isaset: New
659  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
660                   module
661                   Include i2c-nforce2
662  Program sensord: New --rrd-no-average parameter
663                   Syncronize time slots with rrd
664                   Fix W83781D temp3 alarm (Aurelien Jarno)
665                   Add ASB100 support (Andrew May)
666  Program sensors: Fully support the PC87360 family
667                   Fix lm80 temperature alarms
668                   Support the lm99
669                   Do not invert AS99127F beep bits anymore
670                   Fix W83781D temp3 alarm (Aurelien Jarno)
671                   Print library version string
672  Program sensors-detect: Rework Super I/O detection
673                          Support SiS655/SiS96x
674                          Support ADT7461 and ADT7467
675                          Better support for ADM1027, ADT7460 and ADT7463
676                          Explicitly support ADM1028
677                          Scan all logical devices of PC87365 and PC87366
678                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
679                          Detect eeproms with software write protect (not
680                          enabled by default)
681                          Support ALi 1563 (2.6 only)
682                          Drop LTC1710 support
683                          Use byte reads for probing on ranges 0x30-0x37 and
684                          0x50-0x5F
685                          Improve LM89 and LM99 support
686                          Support GeForce FX 5900 video cards
687                          Fix devfs misdetection (Aurelien Jarno)
688                          Detect 6300ESB, ICH6
689                          Fix double detection of ISA chips
690                          Support MAX1619
691                          Support PC87373 Super-I/O
692                          Fix unknown adapters appearing multiple times
693                          Refine MAX6650/MAX6651 detection
6962.8.6 (20040405)
697  File README.thinkpad: Update status
698  File doc/chips/pca9540: New
699  File doc/chips/pc87360-fan: New
700  File etc/ Update pcf8591 default configuration
701  Library: Switch to new sysfs naming standard
702           Fix gcc 3.3 warnings (Philipp Thomas)
703           Support 2.6 ds1621 and pcf8591
704           Change pcf8591 magnitudes
705           Support pc87360-fan
706  Makefile: Install shared library 755
707  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
708  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
709  Modules ds1621, pcf8591: Check for capabilities before using them
710                           (Aurelien Jarno)
711  Modules pcf8574, pcf8591: Cleanups
712  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
713  Module adm1021: Better detection and initialization
714  Module pca9540: New driver for the Philips PCA9540
715  Module pc87360-fan: New driver for the National Semiconductor PC87360,
716                      PC87363 and PC87364 Super I/O chips
717  Module smsc47m1: Support the LPC47B27x
718  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
719  Program i2cdetect: Skip special addresses by default
720  Program sensord: Prevent null pointer dereference (Tim Toohey)
721  Program sensors: Print the degree symbol in the terminal's current locale
722                   (Aurelien Jarno)
723                   Update pcf8591 print to support 2.6 driver
724                   Support pc87360-fan
725  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
726                          Improved SiS chips support
727                          Add a white list of IBM systems
728                          Drop support of undetectable adapters
729                          Fix smart battery detection
730                          Add smart battery charger and manager detection
731                          Rework adm1021 and clones detection
732                          The PC87360, PC87363 and PC87364 Super I/O chips
733                          now have a (preliminary) driver
734                          Rework Super I/O detection
735                          Better support of devfs
736  Program New
7392.8.5 (20040305)
740  File doc/chips/SUMMARY: Update
741  File etc/ Epox 8K3A tweaks. (Kronos)
742  Makefiles hotplug and rrd: Remove -o and -g arguments to install
743  Module bmcsensors: Increase max SDRs to 100
744  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
745  Module i2c-amd756: Don't register driver to avoid driver conflicts.
746                     (Daniel Rune Jensen)
747  Module it87: Better temperature sensor types handling (Takeru Komoriya)
748               Fix reset=1 (Takeru Komoriya)
749  Module lm80: Code cleanups
750  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
751  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
752  Module w83627hf: Add w83637hf support
753                   Fix exported name
754                   Fix PWM in w83627thf
755                   Preserve other bits when forcing temp2/3 to comparator mode
756  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
757                  Remove asb100 support
758  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
759          Define driver ID if i2c-id.h doesn't have it yet.
760  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
761          Backport oops fix from Linux 2.6.
762  Modules (all chips): Get rid of useless headers
763  Program Add sysfs support
764  Program sensors: Add w83637hf support
765                   Add support for Shuttle Ethernet EEPROMs
766                   Drop 2.6 subclient detection
767  Program sensors-detect: Add heuristics to the LM80 detection function
768                          Add support for W83L785R, improve W83L784R/AR
769                          Add GeForce FX 5600 as supported by rivatv
770                          More Super IO chips, better handling
771  Library: Update to match renames in fscher
772           Reverse temporary changes to w83l785ts mappings
773           Fix vt1211 and vt8231 uch_config not being writable
774           Add 2.6 lm80 support
775           Add w83637hf support
776           Remove in6 and temp1 from vt1211 and vt8231
777           Add support for Shuttle Ethernet EEPROMs
778           Remove unused as99127f features
7812.8.4 (20040207)
782  File doc/lm_sensors-FAQ.texi: Update 4.20.
783  File doc/chips/it87: Change hyst to low
784  File doc/chips/w83l785ts: New
785  File etc/ Change it87 hyst to low
786                            Fix w83697hf supposed to have temp3
787                            Limits initialization for adm1025/ne1619
788                            Handle fscher voltage conversions
789                            Add Tyan Trinity S2495 KT400 setup (Eric
790                              Schumann)
791                            Fix fscher fan labels (Reinhard Nissl)
792  Library: Better 2.6 eeprom support
793           Change it87 hyst to low
794           Add 2.6 gl518sm, fscher support
795           Fix 2.6 negative voltages handling
796           Temporary fix to w83l785ts mappings
797  Module adm1025: Separate prefix for NE1619
798  Module adm1026: Remove use of temporary ID
799                  Define addresses as a range
800  Module bmcsensors: Fix reservations
801  Module fscher: Externalize voltage conversions
802  Module eeprom: Remove memtype
803  Module i2c-piix4: Fix resource release error
804                    Various cleanups
805  Program Add sysfs support
806  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
807                   Drop linux 2.2 support
808                   Add w83627hf
809  Program sensors: Do not show algorithm by default
810                   Cleanup temperature unit display code
811                   Cleanup label spacing code
812                   Fix output to UTF-8 terms (Marcel Sebek)
813                   Simplify gl518sm print
814                   Do not ignore errors in FSC chips prints
815                   Fix w83l785ts print
816                   Cleanup FSC chips prints
817  Program sensors-detect: Fix PATH issues
818                          Correctly point to the fscher driver
8212.8.3 (20040115)
822  File lm_sensors.spec: Update
823  Library: Add 2.6 eeprom, lm90 support
824           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
825  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
826  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
827  Module i2c-amd756: Fix byte writes
828  Module i2c-tsunami: Cleanups (Daniel Nilsson)
829  Module it87: Fix sg_tlx writes; fix sensor type reporting;
830               add 8712 Super I/O detection;
831               remove initialization of temp_type and fan_ctl;
832               remove init and temp_type module parameters
833  Module lm90: Handle hysteresis differently
834  Module smartbatt: Fix detection, magnitudes, temp
835  Module w83781d: Fix negative voltages
836  Module w83l785ts: New
837  Program eeprog: Make 8 bit mode the default
838  Program fancontrol: Improvements, fixes, support 2.6 kernels
839  Program mkpatch: Add lm75.h
840  Program pwmconfig: Improvements, fixes, support 2.6 kernels
841  Program sensors: Add ASB100 support
842  Program sensors-detect: Add 8712 Super I/O detection;
843                          add W83L785TS detection
8462.8.2 (20031211)
847  IMPORTANT: Limit initialization removed from all chip drivers!
848             If you didn't run 'sensors -s' in the past you may need to now!
849  File Change lm75 scaling back to 1;
850                        Add example for asb100
851  Library: Fix bmcsensors scaling, increase number of sensors;
852           Add w83627thf support; Advance version to 3.0.0;
853           Add hermes, ADM1032, ASB100 support;
854           Add it87 sensor type support;
855           Add sysfs support for kernel 2.6;
856           Fix memory leaks
857  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
858             Fail if no kernel .config file exists;
859             Don't build module dependencies for user and user_install
860  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
861          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
862          smsc47m1, thmc50, via686a, w83627hf, w83781d:
863          Remove initialization of limits by driver.
864  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
865  Modules (chip): Init cleanups
866  Module asb100: New
867  Module bmcsensors: Fix voltage scaling, voltage and fan limits
868  Modules ddcmon, eeprom: Add failure printks
869  Module fscher: New (Fujitsu-Siemens Hermes driver)
870  Module i2c-amd756: Fix AMD8111 support
871  Module i2c-amd8111: Fix byte writes
872  Module i2c-nforce2: Fix byte writes
873  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
874  Module i2c-sis630: Sync with 2.6.0-X driver version
875  Module i2c-viapro: Add support for Via 8237
876  Module it87: Add pwm and "smart guardian" support;
877               add it87 sensor type support
878  Module lm75: Fix negative voltages
879  Module lm90: Add ADM1032 support
880  Module w83781d: Fix 791d and 627hf detection
881  Module w83627hf: Add VID support
882  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
883  Program eeprog: New
884  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
885                                       support sysfs for i2c bus search
886  Program i2cdetect: Add -l option to list busses
887  Program i2cdump: Add 'c' mode for consective address reads
888  Program mkpatch: Cleanups
889  Program pwmconfig: Handle multiple fans controlled by a single pwm
890  Program sensord: Remove ddcmon support
891  Program sensors: Add ADM1032 support; add messages for sysfs
892  Program sensors-detect: Prefer Super I/O drivers;
893                          Fix W83627HF and W83791D detection; detect CSB6;
894                          Detect ADM1029, ADM1030, ADM1031;
895                          Detect W83637HF, W83697UF;
896                          Add it87 sensor type support; add sysfs support
897                          Reduce lm80 misdetects; remove PCFxxxx "detection"
898                          Detect VT8237 (KT600)
899                          Use VPD instead of DMI+ACPI for Thinkpad detection
900                          Suggest new asb100 driver instead of w83781d
9032.8.1 (20031005)
904  NOTE: Requires i2c-2.8.1 or newer!
905  File Improved adm1025 section
906                        Default temp labels for as99127f
907                        Improved lm83 section
908                        Better support for Asus A7V8X-X
909  File doc/chips/SUMMARY: Add SMSC manufacturer ID
910  File doc/chips/adm1025: Add decent documentation (almost new)
911  File doc/chips/lm83: Known motherboards list update, misc updates
912  Library: Change adm1025 names (hyst/over become low/high)
913           Swap adm1025 temp1 and temp2 to match the driver's order
914           Advance version to 2.0.1
915           Update lm83 support
916           Add support for lm90, xeontemp, max6650
917           Add separate messages for read and write errors
918           Add missing message for parse error
920  Modules (various): Fix includes for compilation on Alpha
921                     Use the new i2c_delay function instead of the various
922                     do_pause functions
923  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
924  Module i2c-nforce2: Cleanups
925  Module i2c-i810: Use readl/writel for portable access to PCI memory
926  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
927  Module i2c-savage4: Use readl/writel for portable access to PCI memory
928  Module i2c-sis630: Fix detection
929                     Add block data read/write support
930  Module i2c-sis645: Detection method change/bugfix
931  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
932  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
933  Module adm1025: Major driver update
934                  Add support for Philips NE1619
935                  Simplify the driver a lot (unified voltages, unified
936                  temperatures and much more)
937                  Fix default voltage limits
938                  Change default temperature limits
939                  Swap remote and local temperatures to match the internal
940                  registers order (make the code unification possible)
941                  Export remote diode fault through alarms
942  Module ddcmon: Major update
943                 Add half a dozen new features
944                 Add checksum parameter (same as for the eeprom module)
945                 Fix monitor limits
946  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
947  Module lm78: Fix a fan_div/fan_min bug
948  Module lm83: Add t_crit and alarms support
949  Module lm90: New
950  Module max6650: New
951  Module saa1064: New
952  Module smsc47m1: Add support for 47M142
953  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
954                   enhance w83627thf support
955  Module w83781d: Enhance chip detection; clean up error returns;
956                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
957  Module xeontemp: New
958  Program Add Direct Rambus (DRDRAM)
959                           Mark Rambus as unsupported
960  Program New
961                          Interfaces between our eeprom module and
962                          parse-edid from the read-edid project
963  Program p4b_smbus: Fix SMP compilation
964  Program sensord: Add support for IT87 (Mike Black)
965                   Change ADM1025 support to match the changes made to
966                   the library
967  Program sensors: Rewrite and enhance EEPROM support
968                   Change LM83 and ADM1025 support to match the changes
969                   made to the library
970                   Add DRDRAM support to print_eeprom
971                   Exit(1) on /proc write failure (Malte Starostik)
972                   Add LM90, MAX6650 support
973  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
974                          Add support for LM82, LM86, LM89
975                          Improved W83781D family detection
976                          Add support for AS19927F rev.2, ASB100 Bach
977                          Add support for Asus Mozart-2 (3 types)
978                          Add support for NE1619
979                          Add support for FSC Hermes
980                          Make sure /sbin is in the user's path
981                          Fix EEPROM detection
982                          Automatic module.conf and /dev/i2c* detection
983                          Improve LM82 and LM83 detection
984                          Handle "to-be-written" cleanly
985                          Add detection for 47M14x Super I/O
986                          Handle the one-address-many-chips-same-driver
987                          case
9902.8.0 (20030714)
991  NOTE: Requires i2c-2.8.0 or newer!!!
992  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
993                  2.4.13 or later required for mkpatch.
994  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
995                  i2c package
996  File doc/chips/fscscy: Add watchdog documentation
997  File Fix vt1211/vt8231 thermistor calculations
998  File sensors.h: Now automatically generated
999  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1000           add adm1026, lm83, lm85, w83791d support;
1001           Advance version to 2.0.0
1002  Makefiles: Generate warnings if new library won't be found by;
1003             Modules now install in kernel/drivers/i2c/[busses,chips];
1004             Ensure that headers in /usr/local/include are used first;
1005             Don't use /usr/include headers for modules;
1006             Handle multiple UTS_RELEASE definitions in linux/version.h;
1007             Automatically generate kernel/include/sensors.h;
1008             Remove old gzipped modules; remove old misc directory if empty;
1009             Remove pre-2.4 installation method;
1010             -Wall now the default;
1011             Add new targets user, user_install, and help;
1012             Run depmod after module installation
1013  Modules (all): Cleanups including
1014                - Add #include <i2c-proc.h>
1015                - C99 initializers
1016                - Remove #ifdef MODULE
1017                - Remove #ifndef THIS_MODULE
1018                - Remove #ifndef MODULE_LICENSE
1019                - Remove other 2.1/2.2 #ifdefs
1020                - Remove #include "sensors.h", copy SYSCTL defs to module
1021                - Remove excess #includes
1022                - Remove argument in i2c_register_entry()
1023                - Remove dummy xxx_command() definition
1024                - Remove EXPORT_NO_SYMBOLS
1025                - Remove init_MUTEX #define
1026                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1027                  no longer adjust their own refcounts
1028                - Use module_init() and module_exit()
1029                - Update to new i2c_driver struct definition
1030  Modules (bus PCI): Convert to PCI-module-style initialization
1031  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1032  Module adm1021: Set alarm on failed reads and report old value;
1033                  merge changes from kernel 2.5.54
1034  Module adm1026: New
1035  Module bmcsensors: Fix compile when DEBUG=1
1036  Modules ddcmon, eeprom: Use i2c block reads if possible;
1037                          better error handling
1038  Module ds1307: Add to Makefile
1039  Module gl520sm: Fix temperature over/hyst writes
1040  Module lm75: merge changes from kernel 2.5.54
1041  Module lm83: New
1042  Module lm85: New
1043  Module i2c-ali1535: Check for invalid transaction
1044  Module i2c-ali15x3: Check for invalid transaction
1045  Module i2c-amd756: merge changes from kernel 2.5.54;
1046                     check for invalid transaction
1047  Module i2c-amd8111: merge changes from kernel 2.5.54
1048  Module i2c-i801: Add support for 82801EB (ICH5)
1049  Module i2c-i810: Fix for some chips
1050  Module i2c-nforce2: New
1051  Module i2c-piix4: Check for invalid transaction
1052  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1053  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1054        north bridges; SiS962 and SiS963 south bridges
1055  Module i2c-viapro: Check for invalid transaction
1056  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1057          pwm and pwm enable support; update docs
1058  Module smbus-arp: Check adapter for HW or SW PEC support;
1059                    add reset option
1060  Module w83781d: Add support for w83791d
1061  Module w83627hf: New
1062  Program Recognize DDR and Rambus
1063  Program eeprom: Fix writes for small eeproms
1064  Program eeprom, eepromer: Use local i2c-dev.h for build
1065  Program fancontrol: New
1066  Program lm_sensors.init: Call sensors -s in start()
1067  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1068                   Add adm1026,lm85 support;
1069                   Remove sensors.c file; add sensors_compat.h;
1070                   Remove patches to i2c-core.c and drivers/char/mem.c;
1071                   Now works only for kernels 2.4.13 or later
1072  Program p4b_smbus: Fix 'make install';
1073                     Install in same place as other modules;
1074                     Clear correct bits in config word
1075  Program pwmconfig: New
1076  Program sensors: add adm1026, lm85, w83791d support
1077  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1078                          w83627hf, w83627thf, w83697hf);
1079                          Add support for SiS651, SiS961, SiS745, SiS746;
1080                          Support dmidecode 2.0 and later;
1081                          Fix "C" format error;
1082                          Add support for adm1026, 82801EB (ICH5), W83791D;
1083                          Add support for w83l785ts, nForce2;
1084                          Fix UTF-8 incompatibility;
1085                          Better support for lm75;
1086                          Add support for lm83
10882.7.0 (20021208)
1089  NOTE: Requires i2c-2.7.0 or newer.
1090  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1091  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1092  File doc/busses/i2c-sis645: Add license
1093  File doc/chips/lm92: Add license, features
1094  File doc/chips/maxilife: Add license, parameters, features
1095  File doc/chips/smartbatt: Complete rewrite
1096  File doc/chips/vt8231: Add license, parameters
1097  File Add section for lm75; complete the lm78 section
1098  Library: Add support for MC1066; add multiple VRM version support for lm87;
1099           enhance adm1023 support; initial support for Sony Vaio eeprom;
1100           add support for bmcsensors; add hacks for additional dummy drivers
1101  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1102            add flags for x86_64 compiles
1103  Module adm1021: Add support for MC1066
1104  Module bmcsensors: New
1105  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1106                   kernel 2.5.43; fix 2.2 kernel compiles
1107  Module gl518sm: Iterate allowed only for rev 0x00
1108  Module i2c-amd756: Configure base address for nForce support;
1109                     check for uninitialized base address;
1110                     add support for amd8111 (SMBus 1.0)
1111  Module i2c-amd8111: New (SMBus 2.0)
1112  Module i2c-ipmb: New
1113  Module i2c-ipmi: New
1114  Module i2c-keywest: Sync with kernel 2.4.20
1115  Module i2c-sis630: Add support for SiS730
1116  Module i2c-sis645: Improve support for SiS645/961;
1117                     add support for SiS645DX/961 and SiS735;
1118                     fix 2.2 kernel compiles
1119  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1120  Module lm87: Add multiple VRM version support
1121  Module vt1211: Fix inx limits and alarms; fix in0
1122  Module vt8231: Fix inx limits and alarms; fix in0
1123  Module w83781d: Fix in0/in1 initialization
1124  Module smartbatt: New
1125  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1126  Program Code cleanup; valid HTML; better HTML output;
1127                           stop decoding on checksum error
1128  Program dmidecode: Fix read bug; upgrade to version 1.8
1129  Program doc-insmod: Complete rewrite; fix author output
1130  Program doc-features: Complete rewrite; handle missing sysctl entries;
1131                        handle unknown prefix with suggestion
1132  Program lm_sensors.init: Remove spaces bug; add green/red output
1133  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1134  Program rrd: Add sanity limits to newly-created RRD.
1135  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1136  Program sensors: Add support for MC1066, Rambus Rimms;
1137                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1138                   initial support for Sony Vaio eeprom
1139  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1140                          IPMI, AMD8111; add help if no sensors found;
1141                          add ACPI method for IBM system detection;
1142                          work with old Perl versions again;
1143                          initial support for Sony Vaio eeprom
11452.6.5 (20020915)
1146  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1147  File Fix temp[23] for as99127f; add vt8231
1148  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1149  Module dmi_scan: new
1150  Module ds1621: Fix enable/disable
1151  Module eeprom: Do not corrupt 24RF08's when checksum=1
1152  Module i2c-i801: Check for uninitialized base address;
1153                   enable if not enabled
1154  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1155  Module i2c-sis630: new
1156  Module i2c-sis645: new
1157  Module lm92: Fix in-kernel initialization
1158  Module via686a: Remove VT8231 support
1159  Module vt8231: new
1160  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1161  Program dmidecode: new
1162  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1163  Program mkpatch: Add entries for, lm92,
1164                   pcf8574, pcf8591, smsc47m1, vt1211;
1165                   add dmi_scan
1166  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1167  Program lm_sensors.init: fix stop()
1168  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1169                   add support for logging loadavg in RRD;
1170                   fix down-converting raw labels for RRD;
1171                   update chip support, still behind sensors
1172  Program sensors: Add /usr/local/etc to config file path;
1173                   fix -c and -u flags; add vt8231
1174  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1175                          refuse to run on IBM systems;
1176                          fix sysconfig module numbering;
1177                          change quick write to not corrupt 24RF08's
11792.6.4 (20020719)
1180  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1181  File doc/vid: New
1182  File include/sensors_vid.h: New
1183  File Add vt1211, smsc47m1
1184  Library: Add multiple VRM version support for adm1025, w83781d;
1185           fix 'flex scanner jammed' on some systems;
1186           add vt1211, smsc47m1, lm92;
1187           fix access mode checking
1188  Makefiles: For 2.4+ kernels, modules now install in
1189             kernel/drivers/[i2c,sensors] , not misc/ , and
1190             'make install' removes old versions in misc/ .
1191             Use $CFLAGS and $CPPFLAGS if defined.
1192  Module adm1025: Add multiple VID version support
1193  Module ds1307: new
1194  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1195                     reliability improvements
1196  Module i2c-hydra: Flush posted writes
1197  Module i2c-i801: Add support for 82801DB (ICH4)
1198  Module i2c-i810: Flush posted writes
1199  Module i2c-savage4: new
1200  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1201  Module i2c-voodoo3: Flush posted writes
1202  Module ds1307: New
1203  Module lm92: New
1204  Module smbus-arp: new
1205  Module smsc47m1: new
1206  Module via686a: Add support for VT8231 sensors
1207  Module vt1211: new
1208  Module w83781d: Add multiple VID version support; fix temp alarms
1209  Program eeprom: new
1210  Program i2cdump: Add smbus block command specification, add PEC support
1211  Program lm_sensors.init: new
1212  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1213                   pcf8574, pcf8591, smsc47m1, vt1211
1214  Program p4b_smbus: Add support for ICH4
1215  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1216  Program sensord.init: Renamed, was prog/init/sensors
1217  Program sensord: Major update, now requires rrd source;
1218                   not compiled by default
1219  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1220                   (don't display algo. and adap.) option;
1221                   add vt1211, smsc47m1, lm92
1222  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1223                          add 82801DB, LM85; fix perl warnings;
1224                          generate /etc/sysconfig/lm_sensors for
1225                          lm_sensors.init script
12272.6.3 (20020322)
1228  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1229  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1230  File doc/chips/it87: add more temp_type help
1231  File Un-ignore it87 in8, temp3, fan3;
1232                        add adm1021 section; add lm87 AIN[1,2] template;
1233                        swap negative voltage limits for 782d,783s,627hf,
1234                        697hf,it87; add more it87 help; swap neg. voltage
1235                        limits for lm78(-j), lm79, w83781d, as99127f
1236  Library: Add PCF8591, W83697HF, ADM1023 support;
1237           fix w83* fan_min computes;
1238           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1239  Module adm1024: Add MODULE_LICENSE("GPL")
1240  Module bt869: Add s-video out and DVD resolution support
1241  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1242  Module fscscy: implement min/max for voltages and fans
1243  Module i2c-amd756: Add support for AMD768
1244  Module i2c-i810: Add support for 810E
1245  Module i2c-keywest: Big update, sync with kernel 2.4.18
1246  Module i2c-piix4: Check for uninitialized base address
1247  Module i2c-sis5595: Blacklist 645, 735
1248  Module i2c-viapro: Check for uninitialized base address
1249  Module gl518sm: Standardize /proc entries in0-3
1250  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1251               fan -> fan1; fix temp2 limit writes
1252  Module pcf8574: Add support for PCF8574A; /proc interface changed
1253  Module pcf8591: new
1254  Module sis5595: Blacklist 645, 735
1255  Module w83781d: Add W83697HF support; allow force_subclients parameter
1256                  for Tyan 2460
1257  Programs, Update for new /proc names
1258  Program new
1259  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1260                   add text output
1261  Program init/sensors: New SysV init script
1262  Program Add support for fscscy, add more help entries
1263  Program p4b_smbus: new
1264  Program rrd: Install summ_week.cgi
1265  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1266                   clean up chassis intrusion prints
1267  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1268                          fix Via686a and it87 detection;
1269                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1270                          fix uninitialized values; it87 beats lm78
12722.6.2 (20011118)
1273  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1274  Chip Modules (all): malloc.h -> slab.h
1275  Modules (all): Add MODULE_LICENSE("GPL")
1276  File doc/FAQ: More updates and additions
1277  File Fix it87 in5,in6 (-12,-5) calculations
1278  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1279           update it87 alarm ID's.
1280  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1281  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1282  Module i2c-amd756: Improve busy handling/printk's
1283  Module i2c-i801: Add 82801CA/CAM support
1284  Module i2c-keywest: Sync with PPC people, it works now
1285  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1286  Module i2c-viapro: Add Via VT8233 support
1287  Module it87: Merge alarm_* /proc entries to alarms
1288  Module sis5595: Fix support for rev B0
1289  Module via686a: Make limit initializations reliable
1290  Module w83781d: Allow init=0 parameter to bypass initialization
1291  Program isadump: Add flat address space (PCI) support
1292  Program Add support for i2c-ali1535, adm1024, ds1621,
1293                      fscpos, it87, maxilife, mtp008
1294  Program sensors: Fix w83781d temp precision
1295  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1296                          Fujitsu Poseidon and Scylla,
1297                          Intel 82443MX and 82801CA/CAM detection,
1298                          add ITE 8172G detection (driver in kernel 2.4.10)
13002.6.1 (20010830)
1301  File BUGS: Updated
1302  File doc/FAQ: More updates and additions
1303  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1304  File Fix/enhance it87 section
1305  Library: ds1621 and it87 updates
1306  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1307  Module i2c-amd756: Add AMD 766 support
1308  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1309  Module i2c-piix4: Add Serverworks CSB5 support
1310  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1311  Module adm1025: Fixed temp2 min/max writes
1312  Module ds1621: Add 12-bit precision mode
1313  Module it87: Enable all alarms, add in8 support, add sensor type selection
1314  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1315                  remove support for module
1316  Module sis5595: Recognize unsupported chips and refuse to load
1317  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1318  Program eepromer: new
1319  Program Fix dependencies on i2c-proc; disallow compilation
1320                      of sensors.c as a module in kernel
1321  Program sensors: it87 updates; adjust temp. precision for some chips
1322  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1323                          recognize unsupported SiS chips;
1324                          recognize AMD 766 and Serverworks CSB5.
13262.6.0 (20010612)
1327  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1328        If your make fails because it can't find <linux/i2c-proc.h>, you
1329        forgot this step!!!
1330  File doc/FAQ: Many, many updates and additions
1331  File doc/busses/i2c-sis5595: new
1332  File doc/busses/i2c-tsunami: new
1333  File doc/chips/it87: new
1334  File doc/chips/via686a: Claim support for 686b.
1335  File README.thinkpad: new
1336  File Adjust as99127f in5 (-12V) and temp2 calculations;
1337                        Add lm87, adm9240, ds1780, lm81 templates;
1338                        Enhance help comments in file;
1339                        Add Tyan S2510 dual-MTP008 example;
1340                        Make separate sis5595 section.
1341  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1342  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1343  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1344           Add support for maxilife-nba and amd1024;
1345           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1346  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1347  Chip Modules (all): Change from sensors_* to i2c_* globals
1348                      for new i2c-proc.[ch]
1349  Makefiles: enhance to support Alpha architecture
1350  Module adm1021: Fix lm84 and gl523sm support
1351  Module adm1024: new
1352  Module i2c-i801: Chip detection cleanup
1353  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1354  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1355  Module i2c-tsunami: New
1356  Module i2c-via: Ensure i2c bus is tristated correctly.
1357  Module it87: new driver for IT8705, IT8712, Sis950 chips
1358  Module lm78: Recognize chipid=0x20
1359  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1360  Module mtp008: Fix temp initializations;
1361                 Save BIOS pin configuration of temps and fans;
1362                 Fix sensor type reads/writes and fan min writes;
1363                 Fix spurious invalid sensor type messages
1364  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1365                  used for patched kernel now.
1366                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1367  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1368                  Allow force_addr=0xaddr
1369  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1370  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1371                  reading changes; Add messages for subclient
1372                  registration failure
1373  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1374  Program i2cset: new
1375  Program isadump: fix for Alpha arch. compiles
1376  Program Fix adm9240 typos; Add more chips to;
1377                      Remove ltc1710; Fix i2c_sis5595 typo;
1378                      Support kernel 2.4.5 makefile change;
1379                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1380  Program sens_update_rrd: new
1381  Program sensord: Add -d (debug) and -p (pid-file) options
1382  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1383                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1384                   Change mtp008 temps from max/min to limit/hyst;
1385                   Add maxilife-nba, adm1024, it87 support.
1386  Program sensors-detect: Recognize lm78 with chipid=0x20;
1387                          Recognize SMSC Victory66 South Bridge;
1388                          Add devfs /dev/i2c/x support;
1389                          Add adm1024, it87xx support; Add thinkpad warning.
1390  Program tellerstats: new
13922.5.5 (20010115)
1393  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1394        you have kernel 2.4.0-prerelease or greater.
1395  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1396  File doc/developers/proc: new
1397  File Add mtp008 entries, adm1025 entries
1398  Library: Add ds1621, mtp008 support
1399  Module adm1021: Add support for adm1021a / adm1023
1400  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1401  Module adm1025: Add support for remote temp; rename /proc entries to
1402                  in[0-5] and temp[1-2]; fix negative temp readings
1403  Module adm9240: Rename /proc entries to in[0-5]
1404  Module ddcmon: allow force and force_ddcmon parameters
1405  Module ds1621: new
1406  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1407  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1408  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1409  Module lm87: cleanup, update voltage calculations
1410  Module mtp008: new
1411  Module pcf8574: change update time to 5 seconds
1412  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1413  Module w83781d: fix beep setting via /proc
1414  Programs editticket, readticket: new
1415  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
1416  Program more fixes; now adds many more modules
1417  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1418                   add adm1025 temp2; report temp limits correctly as
1419                   min/max or limit/hysteresis; print message if no
1420                   sensors are found. Removed false errors from lm87 reads.
1421  Program sensors-detect: Add ds1621, mtp008 detection;
1422                          add ServerWorks detection
14242.5.4 (20001012)
1425  Module i2c-viapro: Add support for Via 596B (0x3051)
1426  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1427  Program fixed infinite loop
1428  Program sensors-detect: Detect Via 596B (0x3051)
14302.5.3 (20001008)
1431  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1432  File useful_addresses.html: update
1433  Library: Add lm87 support
1434  Module pcf8574: new
1435  Module i2c-ali1535: new
1436  Module i2c-ali15x3: removed force #ifdef.
1437  Module i2c-i801: support Intel 82801BA (815E chipset)
1438  Module i2c-i801: add i2c block write support, fix smbus block bugs
1439                   (requires i2c 2.5.3 package)
1440  Module i2c-i810: support Intel 82815
1441  Module lm87: new
1442  Module sensors: Fix for kernel 2.4.0-test8
1443                  (remove copy_to_user_ret and put_user_ret)
1444  Module w83781d: limit fan divisors to 8 max. for as99127f
1445  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1446  Program i2cdump: Add smbus block read support
1447  Programs i2cdetect, i2cdump: Improve error reporting
1448  Program sensors: new switch -u (--unknown)
1449  Program sensors-detect: detect Intel 82801BA (815E chipset)
1450  Program sensors-detect: detect Intel 82815
1451  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1452  Program sensors-detect: detect National LM87
1453  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1454  Program sensors-detect: Improve error reporting
14562.5.2 (20000709)
1457  File Fix lm80 in8 calculation
1458  Module w83781d: W83783S no longer crashes on unloading
1459  Program sensors-detect: more robustness in case of unknown i2c adapters
1460  Program sensors-detect, libsensors: fix eeprom size reporting
1461  Program sensord: more flexibility, support for alarm scanning etc.
1462  Program sensors: support for ignore setting on sensor alarms.
1463  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
14652.5.1 (20000618)
1466  Library: Add adm1025 support
1467  Module adm1025: new
1468  Module ddcmon: Fixed bus scan which could hang SMBus
1469  Module i2c-keywest: new
1470  Module maxilife: Add support for Maxilife '99 (NBA)
1471  Module via686a: Enable sensors if not enabled by BIOS
1472  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1473  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1474  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1475  Module w83781d: Fis as99127f fan speed (was 66% too high)
1476  Module w83781d: Improve beep input checking
1477  Program i2cdump: Add Winbond-style bank selection
1478  Program isadump: Add Winbond-style bank selection
1479  Program sensors: Add adm1025 support.
1480  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1481  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1482  File Add Maxilife '99 entries
1483  File Remove some as99127f entries.
1484    Note: For as99127f, reinstall manually (make install
1485          won't reinstall it) or else 'sensors -s' will fail.
14872.5.0 (20000312)
1488  Dropped all kernel 2.0 and 2.1 compatibility
1489  Module i2c-i810: new
1490  Module ddcmon: new
1491  Module via686a: new
1492  Module i2c-amd756: fixed region request
1493  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1494  Module w83781d: Don't change pin settings at initialization;
1495                  also fix chip detection.
1496  Library: Support for ddcmon and via686a
1497  Program sensors-detect: Support for ddcmon and via686a
1498  Program sensors: Support for eeprom, ddcmon and via686a
15002.4.5 (20000116)
1501  Introduced DESTDIR installation prefix
1502  Module lm80: fixes, temperature now read and set correctly
1503  Module i2c-voodoo3: driver enhancements
1504  Module w83781d: fixes, AS99127 works much better now
1505  Library: New ignore keyword in config file
1506  Programs: Support for new ignore keyword
1507  Program sensors-detect: Support for MGA detections
15092.4.4 (19991201)
1510  Addition of the alpha release of AMD 756 SMBus host support.
1511  Many fixes and updates to the gl518sm driver
1512  Updates and fixes for device detection
15142.4.0 (19990920)
1515  Too much to list.
1516  i2c and smbus parts are split off to a separate i2c package.
1517  New drivers and other stuff.
15192.3.4 (19990616)
1520  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1521  All: Now compiles against kernel 2.0.x (again ;)
1522  Module gl518sm: some updates and refinements
15242.3.3 (19990603)
1525  All: Now compiles against kernel 2.3.x (x >= 1)
1526  Module i2c-voodoo3: Timing issue fixes
1527  Module bt869: Seems to be functional and relatively well tested
1528  Many modules were modified to be more compatible with the new
1529   Mutex structure in the new experimental kernels.
15312.3.2 (19990507)
1532  Module i2c-hydra: Now compiles on 2.0.x kernels
1533  Module i2c-lm75: Slightly better detection
1534  * New, but not compiled by default:
1535  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1536  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
15382.3.1 (19990501)
1539  All: Now compiles on PPC
1540  Module i2c-hydra: NEW
1541  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1542  Module w83781d: Removed deadlock (mutex was not initialized)
1543  Documentation: A few glitches removed
1544  Makefile: default module installation directory is now
1545            /lib/modules/current/extra/misc
1546  Program sensors-detect: PPC Hydra now detected
1547  Program sensors: Now prints complete GL518SM information
1548  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
15502.3.0 (19990422)
1551  All: Many, many changes and improvements
1552  All: Many small bugs and problems removed
1553  Modules: New insmod parameters
1554  Modules: Much improved chip detection
1555  Module maxilife: NEW
1556  Module adm1021: MAX1617A now also supported
1557  Module adm9240: DS1780 now also supported
1558  Module w83781d: W83782D and W83783S now also supported
1559  Program sensors-detect: NEW
1560  Library: All chips now supported
1561  Documentation: Very much improved
15632.2.2 (199903??)
1564  Just some minor updates and bug fixes.
15662.2.1 (19990218)
1567  All: Removed compile warnings
1568  Module i2c-dev: Small bug removed if DEBUG=1 was used
1569  Module sis5595: Now compiles for 2.0 kernels
1570  Module adm1021: Detection corrected
15722.2.0 (19990216)
1573  All: Set copyrights to include 1999
1574  All: Small bugfixes
1575  I2C: Upgraded to newest archive of Simon Vogl
1576  Module i2c-dev: NEW
1577  Module i2c-ali15x3: NEW
1578  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1579     directories, and somewhat improved
1580  Module sis5595: NEW
1581  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1582  Library: Support for new chip drivers, several small bugs fixed
1583  Library manual pages: NEW
1584  Program i2cdetect: Moved to detect directory
1585  Program NEW
1586  Program doc-features: NEW
1587  Program sensors: Added man-page
1588  Document BUGS: Added cdrom bug and kernel i2c conflict
15902.1.2 (19990116)
1591  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1592  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1593  Documentation in doc/kernel: NEW
15952.1.1 (19990107)
1596  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1597                     and older
1598  Module gl518sm.o: Miscelaneous bugs and problems solved
1599  Program isadump: NEW
16012.1.0 (19981230)
1602  Library: Completely NEW
1603  Program sensors: NEW
1604  Program grab_busses: NEW
1605  Program decode-dimms: More information
1606  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1607  Module w83781d.o: NEW
1608  Module lm80.o: NEW
1609  Module gl518sm.o: new procfile beep, several small updates
1610  Modules: Now use pin readings, no more scaling within the kernel (use the
1611           library instead)
16132.0.2 (19981214)
1614  Module eeprom.o: NEW
1615  Program decode-dimms: NEW
1616  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1617           2.1.58
1618  Modules: Somewhat less verbose on transfers
1619  Module lm78.o now recognizes and handles lm78-j and lm79
16212.0.1 (1998121?)
1622  Module gl518sm.o updates, to make it actually work
1623  Module lm75.o high/low-byte swapping write bug fixed
16252.0.0 (19981209)
1626  Initial release
Note: See TracBrowser for help on using the browser.