root/lm-sensors/branches/lm-sensors-3.0.0/CHANGES @ 4726

Revision 4726, 82.1 KB (checked in by khali, 7 years ago)

Fix a memory leak on error in raw print mode.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
4SVN HEAD
5  File BUGS: Delete
6  File i2c-dev.h: Support I2C block reads with specified length
7  All bus modules and documentation: Delete
8  All chip modules and documentation: Delete
9  Legacy hotplug modules and documentation: Delete
10  File doc/version-2: Delete, obsolete
11  File sensors.conf.eg: Add a dme1737 section
12  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
13  File README.patches: Delete, obsolete
14  Library: Clean up pwm symbol names translation
15           Always build with sysfs support
16           Delete procfs and sysctl support (Linux 2.4)
17           Delete all remnants of algorithm names
18           Drop all the chip-specific support
19           Fix a memory leak on error
20           Speed up sensors_get_ignored() a bit
21           No longer export sensors_chip_name_has_wildcards()
22           Delete sensors_do_all_sets(), unused
23           Pass structures by reference
24           Drop support for dummy type
25           New function sensors_snprintf_chip_name()
26           Drop support for dashes in chip names
27           Add support for devices on SPI adapters
28  Makefile: Drop the package and version targets
29  Man pages: Drop "conforming to" sections
30  Man page sensors.conf.5: Update the chip statement section
31  Programs doc/*: Delete, obsolete
32  Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
33  Program i2cdump: Use the new I2C block read function
34  Program isadump: Detect when address bit 7 is a busy flag
35                   Fix Super-I/O exit sequence for Winbond/Fintek chips
36  Program matorb/displayit: Delete, obsolete
37  Program mkdev.sh: Delete, obsolete
38  Program mkpatch: Delete
39  Program fancontrol: Use let for arithmetic evaluation
40                      No longer need awk and grep
41                      Limit calls to external programs (Linux 2.6 only)
42                      Check for configuration file validity
43                      Support optional min and max PWM values
44                      Better integration with init scripts
45                      Use linear control instead of quadratic
46  Program fancontrol.pl: Delete, redundant
47  Program pwmconfig: Use smaller steps for low PWM values
48                     Support optional min and max PWM values
49  Program rrd: Support only hwmon class devices
50               Look for rrd in /usr/bin by default
51               Add missing shell declarations
52               Update URI
53  Program sensors: Drop all the chip-specific support
54                   Fix alignment of alarm for one-limit temperatures
55                   Drop option -U
56                   Fix a memory leak on error (with -u)
57  Program sensors-detect: Stop Super-I/O probe after first family success
58                          Fix SMSC DME1737 detection
59                          Add /usr/sbin to the PATH (#2199)
60                          Add ATI SB700 detection
61                          Add Maxim MAX6680/MAX6681 detection
62                          Add IT8726F detection
63                          Fix IPMI support for 2.6 kernels
64                          Add detection for non-standard SMSC Super-I/Os
65                          No longer depend on i2cdetect
66                          Add SMSC SCH5317 detection
67                          Drop detection of most non-sensors I2C chips
68                          Fix ADM1022 detection
69                          Add detection of many SMSC Super-I/O chips
70                          Add Fintek F71806FG and F71862FG detection
71                          Add Winbond W83L786NR/NG/R/G detection
72                          Add Winbond W83L771W/G detection
73
74
752.10.3 (20070319)
76  Library: Do not skip i2c adapters with only a class device and no
77            physical device. This change is required to survive the
78            planned struct class_dev removal from future 2.6 kernels.
79           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
80           Recognize i2c-isa-based devices as such even after class_dev
81            is gone
82           Compile with -D_REENTRANT
83           Fix support of Linux 2.6's max6650 driver
84           Fix max1619 support
85  Man page i2cdetect.8: Scanning range can be restricted
86  Module bmcsensors: Fix debugging messages
87  Module i2c-ali1563: Improve the status messages (2.6 backport)
88                      Fix device initialization (2.6 backport)
89  Module i2c-amd8111: Cleanups (2.6 backport)
90                      Fix initialization race (2.6 backport)
91  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
92  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
93  Module i2c-viapro: Add CX700 support (2.6 backport)
94  Module smsc47m1: Add SMSC LPC47M292 support
95                   Get rid of a useless semaphore (2.6 backport)
96  Programs i2cdetect, i2cdump, isadump: Flush output in real time
97  Program i2cdump: Cleaner output in SMBus block read mode
98  Program fancontrol.pl: Fix pwmN_enable access (#2190)
99  Program sensors: Add smsc47m2 support (fans)
100                   Fix -A option (hide adapter name) on error
101  Program sensors-detect: Only probe relevant I2C addresses
102                          Drop ARP-capable device detection
103                          Add Maxim MAX6655/MAX6656 detection
104                           (Olexiy Avramchenko)
105                          Add Maxim MAX1668, MAX1805, MAX1989 detection
106                          Add VIA CX700 detection
107                          Drop legacy W83627HF ISA detection
108                          Don't bufferize stdout during probes
109                          Speed up the LM75 and LM77 detection
110                          Clean up the EEPROM detection
111                          Add Dallas DS75 detection
112                          Add SMSC LPC47M292 detection
113                          Add nVidia MCP61 and MCP65 detection
114                          Fix ADM1028 detection
115                          Add Nat. Semi. PC8347L Super-I/O detection
116                          Add SMSC SCH5504 Super-I/O detection (no sensors)
117                          Make the LM78 and W83781D detection safer
118
119
1202.10.2 (20070115)
121  RPM: Obsolete, removed
122  File doc/fan-divisors: Update
123  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
124  Library: Add support for the pc87247 driver (fans only)
125           Probe for busses before chips
126           Drop support for algorithm names
127           Add support for coretemp driver   
128           Major update/optimization of config-file scanner
129           Add config-file scanner regression tests
130           Add f71872f support
131           Add w83627dhg support (David Holl, #2157)
132           Get the i2c adapter names from classdev.name
133           Add adm1029 support (Corentin Labbe)
134  Man page i2cdetect.8: Describe the output convention
135  Man page sensors.1: Update (option -c) and clean up
136  Module bmcsensors: Fix several warnings
137                     Fix fragile structure initialization
138  Module i2c-i801: Add ICH9 support
139  Module p4b_smbus: Add support for the ICH5
140  Module f71805f: Fix the device address decoding (2.6 backport)
141  Module icspll: Delete. It was useless and dangerous.
142  Program decode-dimms.pl: Remove spaces at end of lines
143  Program eepromer: Fix loads of warnings
144  Program i2cdetect: Make the output clearer
145  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
146  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
147                            without need of recompilation.
148  Programs dump/*: More robust handling of user inputs
149  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
150                                  Add support for non-i2c drivers
151  Program fancontrol.pl: Disable debugging by default
152                         Add support for non-i2c drivers
153                         More tolerant config file parsing
154  Program sensord: Add pc87247 support (fans only)
155                   Add vt1211 support (#2150)
156                   Add w83627dhg support (David Holl, #2157)
157                   Add w83627ehf voltage support (Dave Platt)
158                   Add k8temp support (Dave Platt)
159  Program sensors: Add pc87247 support (fans only)
160                   Hide error on missing f71805f fan
161                   Handle option -c more efficiently
162                   Drop option -a (show algorithm names)
163                   Add f71872f support
164                   Add w83627dhg support (David Holl, #2157)
165                   Add adm1029 support (Corentin Labbe)
166                   Hide error on missing w83793 temp (Gong Jun)
167  Program sensors-detect: Add SMSC DME1737 detection
168                          Add Fintek F71882FG and EPoX EP1308 detection
169                          Add Intel Core thermal sensor detection
170                          Preallocate memory for I2C_FUNCS ioctl (#2138)
171                          Prevent misdetection of MAX6633/MAX6634/MAX6635
172                          Add Intel ICH9 detection
173                          Add Maxim MAX6648/MAX6692 detection
174                          Improve ADM1029 detection
175                          Add Andigilog chips detection
176                          Add Intel AMB FB-DIMM thermal sensor detection
177                          Add ATI SB600 detection
178
179
1802.10.1 (20060924)
181  File doc/developers/checklist renamed to dev/developers/release_checklist
182          with clarifications and updates for new SVN server.
183  File README.package: Delete.
184  File doc/busses/i2c-piix4: Update (2.6 backport)
185  File doc/developers/sysfs-interface: Update
186  File etc/sensors.conf.eg: Add an smsc47m192 section
187                            Comment out all set statements
188                            Add an it8716 section
189                            Add a w83793 section
190                            Adjust the vt1211 section to match the new driver
191                             interface
192  Library: Fix device scan when no i2c support is present
193           Add support for W83627EHF voltage inputs and alarms
194           Add support for the smsc47m192 driver
195           Fix all memory leaks (yeah!)
196           Fix no sensors being reported as an error
197           Add support for the IT8716F and IT8718F chips
198           Add support for the W83793 chip (Yuan Mu)
199           Map the 2.6 adm1026's fan8 to fan0
200           Missing sysfs busses and classes are not errors
201           Change vt1211 temp3-7 magnitude from 1 to 3
202  Makefile: Don't grep autoconf.h on user-space targets
203            Fix depmod on non-running kernel version
204            Remove empty include directories on make user_uninstall
205  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
206  Module i2c-amd756-s4882: Improve static semaphore initialization
207                           (2.6 backport)
208  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
209                   Add ICH8 support (2.6 backport)
210                   Fix block transaction poll loops (2.6 backport)
211                   Remove PCI function check (2.6 backport)
212                   Cleanups (2.6 backport)
213  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
214  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
215                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
216                    Drop the fix_hstcfg parameter (2.6 backport)
217  Module i2c-viapro: Fix compilation with kernels < 2.4.21
218                     Add VT8237A and VT8251
219  Module lm83: Add LM82 support (2.6 backport)
220  Module vt1211: The VT1211 has no in6
221                 Rework the voltage and temperature conversions and the
222                  temperature input order to match the Linux 2.6 driver
223  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
224                  Add specific alarm and beep defines for the W83791D
225  Module w83792d: Fix PWM range (2.6 backport)
226  Program decode-dimms.pl: Decode depending on the memory type
227                           Decode the manufacturing date to an ISO8601 date
228                           Add the memory size computation and provide brief
229                            timing characteritics for SDRAM/DDR/DDR2 memory
230                           Add memory size computation for Rambus memory
231                           Various output cleanups and fixes
232  Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
233  Program decode-vaio.pl: Detect and skip false positives
234  Program i2cdetect: Add a mode to print adapter functionalities
235  Program i2cdump: Restore bank after bank switching
236                   Add new mode W (read word on even register addresses)
237  Program mkpatch: Fix typo breaking f71805f
238                   Turn warnings on (-w), and fix them
239                   Print a usage message on missing command line parameters
240  Program pwmconfig: Use mktemp instead of tempfile
241  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
242                   Add smsc47m192 support
243                   Add abituguru support (Hans de Goede)
244                   Fix memory leak when printing an unknown chip
245                   Add it8716 and it8718 support
246                   Make each it87 fan and fan div optional
247                   Print missing w83791d values
248                   Add w83793 support (Yuan Mu)
249                   The adt7463 may not have in4 (#2119)
250                   Hide more vt1211 missing input errors
251                   Clearer error messages when no sensors found
252  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
253                          Add ATI IXP200/300/400 SMBus detection
254                          Prevent warning on 64-bit PCI addresses
255                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
256                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
257                           F75384S/M, F75387SG/RG and F81218D detection
258                          Add Winbond W83793R/G and W83627DHG detection
259                          Handle the W83791D driver difference between kernels
260                          Add nForce4 MCP04, MCP51 and MCP55 detection
261                          Add AMD Geode devices detection
262                          Add ITE IT8716F and IT8718F detection
263                          Add NatSemi/Winbond PC87427 detection
264                          Get driver information for busy addresses from
265                           sysfs (2.6 only)
266                          Drop the ISA IT87xxF detection
267                          Check i2c adapter functionalities before probing
268                          Add Intel ICH8 SMBus detection
269                          Add AMD K8 thermal sensors detection
270                          Simplify detection of SiS5595, VIA686 and VT8231
271                          Add Analog Devices ADM1033, ADM1034, ADT7462,
272                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
273                          Check for root user at startup
274                          Attempt to be slightly more user-friendly
275                          Add VT8237A and VT8251
276                          Remove detection of nVidia graphics adapters
277                          Use sysfs for PCI device enumeration
278                          Add generic PCI SMBus adapter detection
279                          Add generic Super-I/O logical device detection
280                          Add SMSC LPC47M172/182 detection
281
282
2832.10.0 (20060214)
284  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
285  File doc/busses/i2c-viapro: Update (2.6 backport)
286  File doc/chips/via686a: Update (2.6 backport)
287  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
288  File etc/sensors.conf.eg: Do not set vrm by default
289  File i2c-dev.h: Fix union i2c_smbus_data definition
290                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
291                  Add missing parentheses around macros
292                  Drop I2C_FUNC_SMBUS_EMUL
293                  Drop I2C_FUNC_SMBUS_*_PEC
294                  Drop I2C_SMBUS_*_PEC
295  File sensors_vid.h: Drop default VRM
296  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
297           This is intentional.  Use decode-dimms.pl if you still
298           need your memory SPD data.
299  Library: Big update to use libsysfs.  More TODO though.
300           Fix bus matching code for Linux 2.6 (Karsten Petersen)
301           Add f71805f, w83687thf support
302           Add platform drivers support
303           Fix sysctl warnings on x86_64
304           Restore vt1211 temp1
305  Makefile: Compile user-space programs with -Wundef
306  Module i2c-i801: Simplify the hardware PEC code
307                   Always set PEC mode explicitly before each transaction
308  Module i2c-i810: Documentation update, PCI IDs cleanup
309  Module i2c-keywest: Remove bus probing code (2.6 backport)
310  Module i2c-nforce2: Remove dead code (2.6 backport)
311                      Add the ID of the nForce4 MCP-04 (2.6 backport)
312  Module i2c-via: Remove dead code
313  Module i2c-viapro: Remove dead code
314                     Support I2C block read (2.6 backport)
315                     Code cleanups (2.6 backport)
316                     Improve debug register dump (2.6 backport)
317  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
318          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
319          i2c-sis645: Use pci_driver name to request I/O region; do
320                      not initialize i2c_adapter name to "unset" (2.6
321                      backport)
322  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
323                                              (2.6 backport)
324  Module adm9240: Cleanups (2.6 backport)
325  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
326  Module it87: Minor cleanups
327               Fix fan3_div setting bug (Anton V. Staaf)
328  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
329               Separate the register read function
330               Add PEC support for the ADM1032
331  Module via686a: Cleanups
332  Module w83627hf: Drop useless initialization step (2.6 backport)
333                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
334                   Fix alarms (Yuan Mu)
335                   Preserve fan min on fan div change (Yuan Mu)
336                   Properly handle W83627THF without VID (Yuan Mu)
337                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
338                   Add W83687THF support
339  Module w83781d: Drop W83697HF support (Grant Coady)
340  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
341                  Fix fan control mode (PWM/DC) reporting
342                  Fix fan div auto-adjust (Yuan Mu)
343                  Fix the subclient handling
344  Module w83l785ts: Minor cleanup (2.6 backport)
345  Module vt1211: Restore temp1
346  Modules vt1211, vt8231: Change default VRM to 9.1
347  Program decode-dimms.pl: Add lookup tables for manufacturer names
348                           Fix rounding error in PCxxxx speed computation
349                           Improve text output
350                           Improve speed under Linux 2.6
351                           Verify checksum before decoding anything
352                           Improve manufacturing location decoding
353                           Improve memory type detection
354                           Improve part number decoding
355  Program i2cdump: Drop now useless #ifdef tests
356                   Fix capability check for continuous byte mode
357  Program i2cget: New
358  Program i2cset: Add PEC support
359                  Fix argc check
360  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
361                                       Print the correct bus type if bus
362                                       functionality can be queried
363  Program isadump: Display the real addresses in flat mode
364  Program mkdev.sh: Silently skip already existing nodes
365  Program mkpatch: Include f71805f
366  Program sensord: Do not log algorithm names
367                   Drop EEPROM support (Aurelien Jarno)
368                   Add W83627EHF, F71805F/FG support
369                   Fix PC87365/PC87366 alarms
370  Program sensors: Drop free_the_label
371                   Fix compilation with uclibc (no iconv)
372                   Add f71805f, w83687thf support
373  Program sensors-detect: Drop algorithm names
374                          Do not rely on i2cdetect -l printing algo names
375                          Simplify adapter name matching mechanism
376                          New address for ADM1032, ADT7461
377                          Improve ADT7467, ADT7468 support
378                          Fix MAX6659 reported driver
379                          Add Fintek F71805F detection
380                          Add Analog Devices ADT7476 detection
381                          Add Intel 82845G detection
382                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
383                          Fix udev detection in some corner case
384                          Improve DS1621 detection
385                          Always prefer ISA access over SMBus access
386
387
3882.9.2 (20050906)
389  File doc/chips/*: Big update (2.6 backport)
390  Library: Drop ds1780-specific code (now use adm9240)
391           Fix memory leak in sensors_get_label()
392           Support /sys/class/hwmon (Linux 2.6.14+)
393           Limit stack usage in sensors_read_proc_chips()
394  Makefile: Detect 2.6+ kernels and check targets
395  Man page isaset.8: Fix typos
396  Module adm1031: Fix broken kfree() calls
397  Module i2c-ali1563: New (2.6 backport by Winbond)
398  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
399  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
400          w83627hf.c: Tag find function __init
401  Module lm93: Fix memory leak
402  Module smsc47m1: Fix PWM enable polarity on read
403  Modules w83627hf, w83781d: Allow setting fan divisor to 128
404  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
405                           Added DDR/DDR2 frequency reporting in convenient
406                           form of DDRxxx PCyyyy
407  Program i2cdump: Properly handle short i2c block reads
408  Program fancontrol.pl: Fix compile errors
409  Program mkpatch: Include i2c-ali1563
410                   Include w83792d
411  Program pwmconfig: Fix unsafe temporary file use
412  Program rrd: Support 2.6 kernels
413  Program sensord: Add support for w83637hf
414                   Support pc87360 (Henrik Brix Andersen)
415  Program sensors: Support the VAIO "VGN" prefix for eeprom
416  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
417                          Advertise the w83792d driver
418                          Improve IT8705F and IT8712F detection
419                          Merge LM82 and LM83 detection
420                          Add W83687THF detection
421
422
4232.9.1 (20050412)
424  File doc/busses/i2c-nforce2: Update
425  File doc/chips/it87: Update
426  File doc/chips/lm90: Update for adt7461
427  File doc/chips/mic74: New
428  File etc/sensors.conf.eg: New sections for lm92 and w83792d
429  Library: Add support for 2.6 fscpos driver (Stefan Ott)
430           Fix sis5595 in4 (Aurelien Jarno)
431           Add support for 2.6 gl520sm driver (Maarten Deprez)
432           Add support for 2.6 bmcsensors driver (Yani Ioannou)
433           Add support for w83792d (Chunhao Huang/Winbond)
434           Add support for 2.6 adt7461 (James Chapman)
435           Add support for 2.6 lm92
436           Add support for 2.6 vt1211
437           Add preliminary support for 2.6 w83627ehf
438  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
439            Use -fno-strict-aliasing on all architectures
440  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
441  Module bmcsensors: Fix compile error
442                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
443  Module ds1621: Fix detection (Aurelien Jarno)
444  Module eeprom: Discard SPD-centric checksum module parameter
445                 Cleanup detection function (backport from Linux 2.6)
446  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
447  Module i2c-i801: Temporarily disable broken I2C block read
448  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
449                   Gelato)
450  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
451  Module i2c-viapro: Prevent repeated resets
452  Module it87: Improve Super-I/O detection
453               Limit I2C address range
454               Support VID on the IT8712F
455  Module lm75: Only initialize CMP/INT bit
456  Module lm78: Fix bug with setting negative temperature limits
457  Module lm85: Properly differentiate between ADM1027 and ADT7463
458               Add EMC6D102 support
459  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
460               Add limited ADT7461 support
461  Module lm93: Fix IN10 (+5V) scaling
462  Module mic74: New
463  Module w83627hf: Support secondary Super-I/O address
464                   Enable temp2 and temp3 if they are disabled
465  Module w83781d: Revert AS99127F temp2 and temp3 computation change
466                  Skip final initialization step for AS99127F chips
467  Module w83792d: New (Chunhao Huang/Winbond)
468  Program ddcmon: New; user-space replacement for the ddcmon driver
469  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
470  Program isadump: Handle Super-I/O keys
471  Program lm_sensors.init: Cleanups (Axel Thimm)
472  Program mkdev.sh: Add basic command-line interface
473  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
474  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
475                     Don't complain about read-only enable files (lm85)
476                     Fix handling of alternate config file name
477  Program sensord: Fix erroneous error message (Aurelien Jarno)
478                   Support sis5595 in4 (Aurelien Jarno)
479                   Support w83627thf
480                   Support the separate it8712 prefix (Aurelien Jarno)
481  Program sensors: Display sis5595 in4 (Aurelien Jarno)
482                   No errors on missing pc87360 fans
483                   Add gl520sm support (Maarten Deprez)
484                   Improve vt1211 error/ignore handling (Michael Carland)
485                   Support w83792d, w83627ehf
486  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
487                          Improve IT8705F and IT8712F detection
488                          Improve udev detection
489                          Fix DS1621 detection
490                          Add W83627EHF detection
491                          Add ATI SMBus detection
492                          Add VT1211 alias detection
493                          Warn if chip modules not found
494                          Add i2c-ipmi to list if bmcsensors is on it
495                          Add PC87591 detection
496                          Search for correct udev db file name
497                          Add nForce3 250Gb and nForce4 detection
498
499
5002.9.0 (20041228)
501  NOTE: Requires i2c-2.9.0 or newer!
502  File README.thinkpad: Update
503  File doc/chips/it87: Cleanups
504  File doc/chips/lm63: New
505  File etc/sensors.conf.eg: Set via686a voltage limits
506  File kernel/chips/Module.mk: Resync module list with mkpatch
507  File kernel/include/sensors_compat.h: Define __devexit_p if missing
508                                        (kernels 2.4.16 and older)
509  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
510                             and dec_use removed in release 2.8.0
511  Modules (all chip drivers): Remove owner from i2c_driver; pass
512                              controlling_mod to i2c_register_entry() again
513  Module bmcsensors: Support function 1/x
514  Module i2c-amd756: Display the real bus name
515  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
516  Module i2c-i801: Support i2c block read (ICH5 and higher)
517                   Add PEC support for ICH6
518                   Add support for ICH7
519  Module i2c-ipmb: Remove from build since it doesn't work
520  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
521  Module icspll: Fix compilation
522  Module lm63: New driver for the National Semiconductor LM63
523  Module lm83: Use signed types for temperatures
524               Check limits on register writes
525  Module lm87: Round voltages properly
526               Retry on read errors (David Knierim)
527               Less agressive init (no reset)
528  Module lm90: Use signed types for temperatures
529               Check limits on register writes
530  Module lm93: Added module parameter for VID pin input thresholds.
531               Fix typo in dynamic VID alarms
532               Adds a couple log messages for failed transactions (David
533               Knierim)
534               Fix compilation breaking C99-ism (Axel Thimm)
535               Fix block read retries
536  Module pc87360: Support secondary Super-I/O address
537  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
538  Library: Add lm63 support
539           Add lpc47b397 support
540  Programs *.init: Rename lockfile to match file name
541  Programs i2cset, isaset: Written byte/word can be masked
542  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
543  Program mkpatch: Include i2c-amd756-s4882
544  Program pwmconfig: Handle new (well, back to old) pwm files names for
545                     Linux 2.6.10 and up
546  Program sensord: Do not scale load average (Aurelien Jarno)
547  Program sensors: Add lm63, lpc47b397 support
548                   Support DDR2 memory module EEPROMs (Rudolf Marek)
549                   Support only one location for the default configuration file
550                   Display the default configuration file location in --help
551                   Simplify the configuration file opening code
552  Program sensors-detect: Improve LM63 detection
553                          Discard IBM Thinkpad detection code
554                          Add PCA9556, LPC47B397, ICH7 detection
555                          Fix W83792D detection, add W83791SD detection
556
557
5582.8.8 (20041007)
559  File doc/donations: Update
560  File doc/lm_sensors-FAQ.texi: Add 4.6.1
561                                Update 4.7
562  File doc/chips/gl518sm: Update "iterate" info
563  File doc/chips/it87: Discard outdated module parameters
564  File doc/chips/lm75: LM77 is not supported
565  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
566  File doc/chips/lm93: New
567  File doc/chips/w83l785ts: Improvements
568  File etc/sensors.conf.eg: Fix it87 lines order
569                            Update lm87 section
570  File kernel/include/sensors_vid.h: Support VRM 10.0
571  Library: Support 2.6 adm1025
572           Preliminary support for 2.6 lm87
573           Support 2.6 adm9240
574           Allow an alternative sysfs file name for chip features (2.6)
575           Fix lm83 critical limits (2.6)
576           Add lm93 support
577           Prevent some procfs errors from being silently ignored
578  Makefiles: Implement user_uninstall (Rudolf Marek)
579             Spoof LOGNAME and HOSTNAME when making html man pages
580  Module adm1025: Refine detection
581                  Update limit registers again (revert of 2.8.1)
582                  Init high limits if they read 0
583                  Fix conversions
584  Module lm75: Refine detection
585  Module lm78: Fix init
586  Module lm83: Default to kind lm83 if forced.
587               Fix temperature macros.
588  Module lm90: Add LM86, MAX6657 and MAX6658 support
589  Module lm93: New
590  Module mtp008: Fix the setting of limits on temp2
591  Module pca9540: Refine detection
592  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
593                  Support VID
594                  Fix fan_div file when fan count is less than 3
595                  Additional init and debug
596  Module smsc47m1: Fix pwm_enable being inverted
597  Module w83627hf: Add alternate VCORE/in0 calculation method
598                   Remove reset of chip by driver on initialization
599  Module w83781d: Fix default VRM for w83791d
600  Module w83l785ts: Implement read error handling (backport from 2.6)
601  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
602                    Wait for user input to continue (as opposed to 5 sec
603                    delay), can be skipped with -y
604                    Various cleanups and code refactoring
605                    Update manual pages
606  Program fancontrol.init: New (Dean Takemori)
607  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
608  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
609                           (Giuseppe Della Bianca)
610  Program mkdev.sh: Detect devfs and refuse to run
611                    Use mknod's mode instead of chmod
612  Program mkpatch: Include xeontemp and pc87360
613  Program sensors: Rework adm1025 support
614                   Display pc87365/pc87366 VID
615                   Improve smsc47m1 support
616                   Hide 2.6 adm1027 alarm_mask being missing
617                   Print VRM version for all supported chips
618  Program sensors-detect: Support LM93, LM77, LM63
619                          Support PC8739x Super-I/O family (no sensors)
620                          Fix PCA9540 support
621                          Refine ADM1025/ADM1025A detection
622                          Refine LM75 detection
623                          Ignore missing /proc/modules (Andras Bali)
624                          Script-wide Perl cleanups
625                          Support udev
626                          Support W83792D, LM96000
627
628
6292.8.7 (20040611)
630  File README.thinkpad: Update 24RF08 status
631  File doc/fan-divisors: More info on accuracy
632  File doc/lm_sensors-FAQ.texi: Update 4.27
633  File doc/chips/adm1031: New
634  File doc/chips/max1619: New
635  File doc/chips/pc87360-fan: Renamed to pc87360
636  File doc/chips/pc87360: Big update
637  File doc/chips/w83781d: Update AS99127F documentation
638  File etc/sensors.conf.eg: Add comments about BP6 voltages
639                            Add comment on Asus A7V8X-X VCore
640                            Misc fixes to lm80 section
641                            Update via686a section
642                            New lm99 section
643                            Add section for LM85-like chips
644                            Preliminary pc87366 section
645                            Add comment on GL520SM application modes
646                            Document beep_enable (Aurelien Jarno)
647                            Preliminary max1619 section
648                            Preliminary adm1030 and adm1031 sections
649  Library: Fix 2.6 VRM
650           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
651           Fully support the PC87360 family
652           Support the lm99
653           Add version and date strings
654           Support 2.6 max1619
655  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
656  Man page i2cdetect.8: document new command line flags
657  Man page i2cdump.8: More details on how i2cdump can write to a chip
658  Modules (all chip drivers): Rework memory allocation scheme.
659  Module adm1031: New (Alexandre d'Alton)
660  Module bmcsensors: Fix oops by creating thread for initialization
661  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
662  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
663          asb100.c, lm92.c: Use swab16
664  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
665  Module gl520sm: Less agressive initialization process
666                  Fix temp1 limits being unsettable in application
667                  Ensure that temp2 and in4 are not used at the same time
668  Module i2c-i801: Support 6300ESB and ICH6
669  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
670  Module i2c-sis645: Add support for SiS655
671  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
672  Module lm90: Support LM99 and LM89
673  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
674               Get rid of useless i2c_probe call
675  Module max1619: New (Alexey Fisher)
676  Module p4b_smbus: Add support for mobile versions of the 82801
677                    (Axel Thimm)
678  Module pc87360-fan: Renamed to pc87360
679  Module pc87360: Also support PC87365 and PC87366
680                  Add write support
681                  Correctly set the chip name depending on the type
682                  Add voltage and temperature support
683                  Fix fan speed computation
684                  Retrieve fans configuration from Super-I/O space
685                  Export pwm_enable (read-only)
686                  Honor pwm invert bits
687                  Clear fan alarms after we read them
688                  Do not read fan data when monitoring is disabled
689                  Do not include SENSORS_INSMOD stuff
690                  New module parameter: init
691                  Fan clock dividers change automatically
692                  Add thermistor dupport
693  Module smsc47m1: Lock on reads and writes
694                   Various PWM fixes
695  Module thmc50: Fix address range
696  Module via686a: Fix voltage roundings
697                  Simplify temperature conversions
698  Module w83781d: Drop PWM support for as99127f
699                  Invert AS99127F beep bits in driver rather than user-space
700  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
701  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
702  Program fancontrol.pl: New
703  Program i2cdetect: Adapt probing method to address
704                     Add -q and -r flags to force probing methods
705                     Allow probing range selection
706  Program isadump: Major improvements
707  Program isaset: New
708  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
709                   module
710                   Include i2c-nforce2
711  Program sensord: New --rrd-no-average parameter
712                   Syncronize time slots with rrd
713                   Fix W83781D temp3 alarm (Aurelien Jarno)
714                   Add ASB100 support (Andrew May)
715  Program sensors: Fully support the PC87360 family
716                   Fix lm80 temperature alarms
717                   Support the lm99
718                   Do not invert AS99127F beep bits anymore
719                   Fix W83781D temp3 alarm (Aurelien Jarno)
720                   Print library version string
721  Program sensors-detect: Rework Super I/O detection
722                          Support SiS655/SiS96x
723                          Support ADT7461 and ADT7467
724                          Better support for ADM1027, ADT7460 and ADT7463
725                          Explicitly support ADM1028
726                          Scan all logical devices of PC87365 and PC87366
727                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
728                          Detect eeproms with software write protect (not
729                          enabled by default)
730                          Support ALi 1563 (2.6 only)
731                          Drop LTC1710 support
732                          Use byte reads for probing on ranges 0x30-0x37 and
733                          0x50-0x5F
734                          Improve LM89 and LM99 support
735                          Support GeForce FX 5900 video cards
736                          Fix devfs misdetection (Aurelien Jarno)
737                          Detect 6300ESB, ICH6
738                          Fix double detection of ISA chips
739                          Support MAX1619
740                          Support PC87373 Super-I/O
741                          Fix unknown adapters appearing multiple times
742                          Refine MAX6650/MAX6651 detection
743
744
7452.8.6 (20040405)
746  File README.thinkpad: Update status
747  File doc/chips/pca9540: New
748  File doc/chips/pc87360-fan: New
749  File etc/sensors.conf.eg: Update pcf8591 default configuration
750  Library: Switch to new sysfs naming standard
751           Fix gcc 3.3 warnings (Philipp Thomas)
752           Support 2.6 ds1621 and pcf8591
753           Change pcf8591 magnitudes
754           Support pc87360-fan
755  Makefile: Install shared library 755
756  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
757  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
758  Modules ds1621, pcf8591: Check for capabilities before using them
759                           (Aurelien Jarno)
760  Modules pcf8574, pcf8591: Cleanups
761  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
762  Module adm1021: Better detection and initialization
763  Module pca9540: New driver for the Philips PCA9540
764  Module pc87360-fan: New driver for the National Semiconductor PC87360,
765                      PC87363 and PC87364 Super I/O chips
766  Module smsc47m1: Support the LPC47B27x
767  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
768  Program i2cdetect: Skip special addresses by default
769  Program sensord: Prevent null pointer dereference (Tim Toohey)
770  Program sensors: Print the degree symbol in the terminal's current locale
771                   (Aurelien Jarno)
772                   Update pcf8591 print to support 2.6 driver
773                   Support pc87360-fan
774  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
775                          Improved SiS chips support
776                          Add a white list of IBM systems
777                          Drop support of undetectable adapters
778                          Fix smart battery detection
779                          Add smart battery charger and manager detection
780                          Rework adm1021 and clones detection
781                          The PC87360, PC87363 and PC87364 Super I/O chips
782                          now have a (preliminary) driver
783                          Rework Super I/O detection
784                          Better support of devfs
785  Program sensors-detect-stat.pl: New
786
787
7882.8.5 (20040305)
789  File doc/chips/SUMMARY: Update
790  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
791  Makefiles hotplug and rrd: Remove -o and -g arguments to install
792  Module bmcsensors: Increase max SDRs to 100
793  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
794  Module i2c-amd756: Don't register driver to avoid driver conflicts.
795                     (Daniel Rune Jensen)
796  Module it87: Better temperature sensor types handling (Takeru Komoriya)
797               Fix reset=1 (Takeru Komoriya)
798  Module lm80: Code cleanups
799  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
800  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
801  Module w83627hf: Add w83637hf support
802                   Fix exported name
803                   Fix PWM in w83627thf
804                   Preserve other bits when forcing temp2/3 to comparator mode
805  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
806                  Remove asb100 support
807  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
808          Define driver ID if i2c-id.h doesn't have it yet.
809  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
810          Backport oops fix from Linux 2.6.
811  Modules (all chips): Get rid of useless headers
812  Program decode-edid.pl: Add sysfs support
813  Program sensors: Add w83637hf support
814                   Add support for Shuttle Ethernet EEPROMs
815                   Drop 2.6 subclient detection
816  Program sensors-detect: Add heuristics to the LM80 detection function
817                          Add support for W83L785R, improve W83L784R/AR
818                          Add GeForce FX 5600 as supported by rivatv
819                          More Super IO chips, better handling
820  Library: Update to match renames in fscher
821           Reverse temporary changes to w83l785ts mappings
822           Fix vt1211 and vt8231 uch_config not being writable
823           Add 2.6 lm80 support
824           Add w83637hf support
825           Remove in6 and temp1 from vt1211 and vt8231
826           Add support for Shuttle Ethernet EEPROMs
827           Remove unused as99127f features
828
829
8302.8.4 (20040207)
831  File doc/lm_sensors-FAQ.texi: Update 4.20.
832  File doc/chips/it87: Change hyst to low
833  File doc/chips/w83l785ts: New
834  File etc/sensors.conf.eg: Change it87 hyst to low
835                            Fix w83697hf supposed to have temp3
836                            Limits initialization for adm1025/ne1619
837                            Handle fscher voltage conversions
838                            Add Tyan Trinity S2495 KT400 setup (Eric
839                              Schumann)
840                            Fix fscher fan labels (Reinhard Nissl)
841  Library: Better 2.6 eeprom support
842           Change it87 hyst to low
843           Add 2.6 gl518sm, fscher support
844           Fix 2.6 negative voltages handling
845           Temporary fix to w83l785ts mappings
846  Module adm1025: Separate prefix for NE1619
847  Module adm1026: Remove use of temporary ID
848                  Define addresses as a range
849  Module bmcsensors: Fix reservations
850  Module fscher: Externalize voltage conversions
851  Module eeprom: Remove memtype
852  Module i2c-piix4: Fix resource release error
853                    Various cleanups
854  Program decode-vaio.pl: Add sysfs support
855  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
856                   Drop linux 2.2 support
857                   Add w83627hf
858  Program sensors: Do not show algorithm by default
859                   Cleanup temperature unit display code
860                   Cleanup label spacing code
861                   Fix output to UTF-8 terms (Marcel Sebek)
862                   Simplify gl518sm print
863                   Do not ignore errors in FSC chips prints
864                   Fix w83l785ts print
865                   Cleanup FSC chips prints
866  Program sensors-detect: Fix PATH issues
867                          Correctly point to the fscher driver
868
869
8702.8.3 (20040115)
871  File lm_sensors.spec: Update
872  Library: Add 2.6 eeprom, lm90 support
873           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
874  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
875  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
876  Module i2c-amd756: Fix byte writes
877  Module i2c-tsunami: Cleanups (Daniel Nilsson)
878  Module it87: Fix sg_tlx writes; fix sensor type reporting;
879               add 8712 Super I/O detection;
880               remove initialization of temp_type and fan_ctl;
881               remove init and temp_type module parameters
882  Module lm90: Handle hysteresis differently
883  Module smartbatt: Fix detection, magnitudes, temp
884  Module w83781d: Fix negative voltages
885  Module w83l785ts: New
886  Program eeprog: Make 8 bit mode the default
887  Program fancontrol: Improvements, fixes, support 2.6 kernels
888  Program mkpatch: Add lm75.h
889  Program pwmconfig: Improvements, fixes, support 2.6 kernels
890  Program sensors: Add ASB100 support
891  Program sensors-detect: Add 8712 Super I/O detection;
892                          add W83L785TS detection
893
894
8952.8.2 (20031211)
896  IMPORTANT: Limit initialization removed from all chip drivers!
897             If you didn't run 'sensors -s' in the past you may need to now!
898  File sensors.conf.eg: Change lm75 scaling back to 1;
899                        Add example for asb100
900  Library: Fix bmcsensors scaling, increase number of sensors;
901           Add w83627thf support; Advance version to 3.0.0;
902           Add hermes, ADM1032, ASB100 support;
903           Add it87 sensor type support;
904           Add sysfs support for kernel 2.6;
905           Fix memory leaks
906  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
907             Fail if no kernel .config file exists;
908             Don't build module dependencies for user and user_install
909  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
910          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
911          smsc47m1, thmc50, via686a, w83627hf, w83781d:
912          Remove initialization of limits by driver.
913  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
914  Modules (chip): Init cleanups
915  Module asb100: New
916  Module bmcsensors: Fix voltage scaling, voltage and fan limits
917  Modules ddcmon, eeprom: Add failure printks
918  Module fscher: New (Fujitsu-Siemens Hermes driver)
919  Module i2c-amd756: Fix AMD8111 support
920  Module i2c-amd8111: Fix byte writes
921  Module i2c-nforce2: Fix byte writes
922  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
923  Module i2c-sis630: Sync with 2.6.0-X driver version
924  Module i2c-viapro: Add support for Via 8237
925  Module it87: Add pwm and "smart guardian" support;
926               add it87 sensor type support
927  Module lm75: Fix negative voltages
928  Module lm90: Add ADM1032 support
929  Module w83781d: Fix 791d and 627hf detection
930  Module w83627hf: Add VID support
931  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
932  Program eeprog: New
933  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
934                                       support sysfs for i2c bus search
935  Program i2cdetect: Add -l option to list busses
936  Program i2cdump: Add 'c' mode for consective address reads
937  Program mkpatch: Cleanups
938  Program pwmconfig: Handle multiple fans controlled by a single pwm
939  Program sensord: Remove ddcmon support
940  Program sensors: Add ADM1032 support; add messages for sysfs
941  Program sensors-detect: Prefer Super I/O drivers;
942                          Fix W83627HF and W83791D detection; detect CSB6;
943                          Detect ADM1029, ADM1030, ADM1031;
944                          Detect W83637HF, W83697UF;
945                          Add it87 sensor type support; add sysfs support
946                          Reduce lm80 misdetects; remove PCFxxxx "detection"
947                          Detect VT8237 (KT600)
948                          Use VPD instead of DMI+ACPI for Thinkpad detection
949                          Suggest new asb100 driver instead of w83781d
950
951
9522.8.1 (20031005)
953  NOTE: Requires i2c-2.8.1 or newer!
954  File sensors.conf.eg: Improved adm1025 section
955                        Default temp labels for as99127f
956                        Improved lm83 section
957                        Better support for Asus A7V8X-X
958  File doc/chips/SUMMARY: Add SMSC manufacturer ID
959  File doc/chips/adm1025: Add decent documentation (almost new)
960  File doc/chips/lm83: Known motherboards list update, misc updates
961  Library: Change adm1025 names (hyst/over become low/high)
962           Swap adm1025 temp1 and temp2 to match the driver's order
963           Advance version to 2.0.1
964           Update lm83 support
965           Add support for lm90, xeontemp, max6650
966           Add separate messages for read and write errors
967           Add missing message for parse error
968  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
969  Modules (various): Fix includes for compilation on Alpha
970                     Use the new i2c_delay function instead of the various
971                     do_pause functions
972  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
973  Module i2c-nforce2: Cleanups
974  Module i2c-i810: Use readl/writel for portable access to PCI memory
975  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
976  Module i2c-savage4: Use readl/writel for portable access to PCI memory
977  Module i2c-sis630: Fix detection
978                     Add block data read/write support
979  Module i2c-sis645: Detection method change/bugfix
980  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
981  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
982  Module adm1025: Major driver update
983                  Add support for Philips NE1619
984                  Simplify the driver a lot (unified voltages, unified
985                  temperatures and much more)
986                  Fix default voltage limits
987                  Change default temperature limits
988                  Swap remote and local temperatures to match the internal
989                  registers order (make the code unification possible)
990                  Export remote diode fault through alarms
991  Module ddcmon: Major update
992                 Add half a dozen new features
993                 Add checksum parameter (same as for the eeprom module)
994                 Fix monitor limits
995  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
996  Module lm78: Fix a fan_div/fan_min bug
997  Module lm83: Add t_crit and alarms support
998  Module lm90: New
999  Module max6650: New
1000  Module saa1064: New
1001  Module smsc47m1: Add support for 47M142
1002  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1003                   enhance w83627thf support
1004  Module w83781d: Enhance chip detection; clean up error returns;
1005                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1006  Module xeontemp: New
1007  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
1008                           Mark Rambus as unsupported
1009  Program decode-edid.pl: New
1010                          Interfaces between our eeprom module and
1011                          parse-edid from the read-edid project
1012  Program p4b_smbus: Fix SMP compilation
1013  Program sensord: Add support for IT87 (Mike Black)
1014                   Change ADM1025 support to match the changes made to
1015                   the library
1016  Program sensors: Rewrite and enhance EEPROM support
1017                   Change LM83 and ADM1025 support to match the changes
1018                   made to the library
1019                   Add DRDRAM support to print_eeprom
1020                   Exit(1) on /proc write failure (Malte Starostik)
1021                   Add LM90, MAX6650 support
1022  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1023                          Add support for LM82, LM86, LM89
1024                          Improved W83781D family detection
1025                          Add support for AS19927F rev.2, ASB100 Bach
1026                          Add support for Asus Mozart-2 (3 types)
1027                          Add support for NE1619
1028                          Add support for FSC Hermes
1029                          Make sure /sbin is in the user's path
1030                          Fix EEPROM detection
1031                          Automatic module.conf and /dev/i2c* detection
1032                          Improve LM82 and LM83 detection
1033                          Handle "to-be-written" cleanly
1034                          Add detection for 47M14x Super I/O
1035                          Handle the one-address-many-chips-same-driver
1036                          case
1037
1038
10392.8.0 (20030714)
1040  NOTE: Requires i2c-2.8.0 or newer!!!
1041  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1042                  2.4.13 or later required for mkpatch.
1043  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1044                  i2c package
1045  File doc/chips/fscscy: Add watchdog documentation
1046  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
1047  File sensors.h: Now automatically generated
1048  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1049           add adm1026, lm83, lm85, w83791d support;
1050           Advance version to 2.0.0
1051  Makefiles: Generate warnings if new library won't be found by ld.so;
1052             Modules now install in kernel/drivers/i2c/[busses,chips];
1053             Ensure that headers in /usr/local/include are used first;
1054             Don't use /usr/include headers for modules;
1055             Handle multiple UTS_RELEASE definitions in linux/version.h;
1056             Automatically generate kernel/include/sensors.h;
1057             Remove old gzipped modules; remove old misc directory if empty;
1058             Remove pre-2.4 installation method;
1059             -Wall now the default;
1060             Add new targets user, user_install, and help;
1061             Run depmod after module installation
1062  Modules (all): Cleanups including
1063                - Add #include <i2c-proc.h>
1064                - C99 initializers
1065                - Remove #ifdef MODULE
1066                - Remove #ifndef THIS_MODULE
1067                - Remove #ifndef MODULE_LICENSE
1068                - Remove other 2.1/2.2 #ifdefs
1069                - Remove #include "sensors.h", copy SYSCTL defs to module
1070                - Remove excess #includes
1071                - Remove argument in i2c_register_entry()
1072                - Remove dummy xxx_command() definition
1073                - Remove EXPORT_NO_SYMBOLS
1074                - Remove init_MUTEX #define
1075                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1076                  no longer adjust their own refcounts
1077                - Use module_init() and module_exit()
1078                - Update to new i2c_driver struct definition
1079  Modules (bus PCI): Convert to PCI-module-style initialization
1080  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1081  Module adm1021: Set alarm on failed reads and report old value;
1082                  merge changes from kernel 2.5.54
1083  Module adm1026: New
1084  Module bmcsensors: Fix compile when DEBUG=1
1085  Modules ddcmon, eeprom: Use i2c block reads if possible;
1086                          better error handling
1087  Module ds1307: Add to Makefile
1088  Module gl520sm: Fix temperature over/hyst writes
1089  Module lm75: merge changes from kernel 2.5.54
1090  Module lm83: New
1091  Module lm85: New
1092  Module i2c-ali1535: Check for invalid transaction
1093  Module i2c-ali15x3: Check for invalid transaction
1094  Module i2c-amd756: merge changes from kernel 2.5.54;
1095                     check for invalid transaction
1096  Module i2c-amd8111: merge changes from kernel 2.5.54
1097  Module i2c-i801: Add support for 82801EB (ICH5)
1098  Module i2c-i810: Fix for some chips
1099  Module i2c-nforce2: New
1100  Module i2c-piix4: Check for invalid transaction
1101  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1102  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1103        north bridges; SiS962 and SiS963 south bridges
1104  Module i2c-viapro: Check for invalid transaction
1105  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1106          pwm and pwm enable support; update docs
1107  Module smbus-arp: Check adapter for HW or SW PEC support;
1108                    add reset option
1109  Module w83781d: Add support for w83791d
1110  Module w83627hf: New
1111  Program decode-dimms.pl: Recognize DDR and Rambus
1112  Program eeprom: Fix writes for small eeproms
1113  Program eeprom, eepromer: Use local i2c-dev.h for build
1114  Program fancontrol: New
1115  Program lm_sensors.init: Call sensors -s in start()
1116  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1117                   Add adm1026,lm85 support;
1118                   Remove sensors.c file; add sensors_compat.h;
1119                   Remove patches to i2c-core.c and drivers/char/mem.c;
1120                   Now works only for kernels 2.4.13 or later
1121  Program p4b_smbus: Fix 'make install';
1122                     Install in same place as other modules;
1123                     Clear correct bits in config word
1124  Program pwmconfig: New
1125  Program sensors: add adm1026, lm85, w83791d support
1126  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1127                          w83627hf, w83627thf, w83697hf);
1128                          Add support for SiS651, SiS961, SiS745, SiS746;
1129                          Support dmidecode 2.0 and later;
1130                          Fix "C" format error;
1131                          Add support for adm1026, 82801EB (ICH5), W83791D;
1132                          Add support for w83l785ts, nForce2;
1133                          Fix UTF-8 incompatibility;
1134                          Better support for lm75;
1135                          Add support for lm83
1136
11372.7.0 (20021208)
1138  NOTE: Requires i2c-2.7.0 or newer.
1139  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1140  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1141  File doc/busses/i2c-sis645: Add license
1142  File doc/chips/lm92: Add license, features
1143  File doc/chips/maxilife: Add license, parameters, features
1144  File doc/chips/smartbatt: Complete rewrite
1145  File doc/chips/vt8231: Add license, parameters
1146  File sensors.conf.eg: Add section for lm75; complete the lm78 section
1147  Library: Add support for MC1066; add multiple VRM version support for lm87;
1148           enhance adm1023 support; initial support for Sony Vaio eeprom;
1149           add support for bmcsensors; add hacks for additional dummy drivers
1150  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1151            add flags for x86_64 compiles
1152  Module adm1021: Add support for MC1066
1153  Module bmcsensors: New
1154  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1155                   kernel 2.5.43; fix 2.2 kernel compiles
1156  Module gl518sm: Iterate allowed only for rev 0x00
1157  Module i2c-amd756: Configure base address for nForce support;
1158                     check for uninitialized base address;
1159                     add support for amd8111 (SMBus 1.0)
1160  Module i2c-amd8111: New (SMBus 2.0)
1161  Module i2c-ipmb: New
1162  Module i2c-ipmi: New
1163  Module i2c-keywest: Sync with kernel 2.4.20
1164  Module i2c-sis630: Add support for SiS730
1165  Module i2c-sis645: Improve support for SiS645/961;
1166                     add support for SiS645DX/961 and SiS735;
1167                     fix 2.2 kernel compiles
1168  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1169  Module lm87: Add multiple VRM version support
1170  Module vt1211: Fix inx limits and alarms; fix in0
1171  Module vt8231: Fix inx limits and alarms; fix in0
1172  Module w83781d: Fix in0/in1 initialization
1173  Module smartbatt: New
1174  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1175  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1176                           stop decoding on checksum error
1177  Program dmidecode: Fix read bug; upgrade to version 1.8
1178  Program doc-insmod: Complete rewrite; fix author output
1179  Program doc-features: Complete rewrite; handle missing sysctl entries;
1180                        handle unknown prefix with suggestion
1181  Program lm_sensors.init: Remove spaces bug; add green/red output
1182  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1183  Program rrd: Add sanity limits to newly-created RRD.
1184  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1185  Program sensors: Add support for MC1066, Rambus Rimms;
1186                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1187                   initial support for Sony Vaio eeprom
1188  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1189                          IPMI, AMD8111; add help if no sensors found;
1190                          add ACPI method for IBM system detection;
1191                          work with old Perl versions again;
1192                          initial support for Sony Vaio eeprom
1193
11942.6.5 (20020915)
1195  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1196  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1197  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1198  Module dmi_scan: new
1199  Module ds1621: Fix enable/disable
1200  Module eeprom: Do not corrupt 24RF08's when checksum=1
1201  Module i2c-i801: Check for uninitialized base address;
1202                   enable if not enabled
1203  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1204  Module i2c-sis630: new
1205  Module i2c-sis645: new
1206  Module lm92: Fix in-kernel initialization
1207  Module via686a: Remove VT8231 support
1208  Module vt8231: new
1209  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1210  Program dmidecode: new
1211  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1212  Program mkpatch: Add Config.in entries for, lm92,
1213                   pcf8574, pcf8591, smsc47m1, vt1211;
1214                   add dmi_scan
1215  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1216  Program lm_sensors.init: fix stop()
1217  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1218                   add support for logging loadavg in RRD;
1219                   fix down-converting raw labels for RRD;
1220                   update chip support, still behind sensors
1221  Program sensors: Add /usr/local/etc to config file path;
1222                   fix -c and -u flags; add vt8231
1223  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1224                          refuse to run on IBM systems;
1225                          fix sysconfig module numbering;
1226                          change quick write to not corrupt 24RF08's
1227
12282.6.4 (20020719)
1229  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1230  File doc/vid: New
1231  File include/sensors_vid.h: New
1232  File sensors.conf.eg: Add vt1211, smsc47m1
1233  Library: Add multiple VRM version support for adm1025, w83781d;
1234           fix 'flex scanner jammed' on some systems;
1235           add vt1211, smsc47m1, lm92;
1236           fix access mode checking
1237  Makefiles: For 2.4+ kernels, modules now install in
1238             kernel/drivers/[i2c,sensors] , not misc/ , and
1239             'make install' removes old versions in misc/ .
1240             Use $CFLAGS and $CPPFLAGS if defined.
1241  Module adm1025: Add multiple VID version support
1242  Module ds1307: new
1243  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1244                     reliability improvements
1245  Module i2c-hydra: Flush posted writes
1246  Module i2c-i801: Add support for 82801DB (ICH4)
1247  Module i2c-i810: Flush posted writes
1248  Module i2c-savage4: new
1249  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1250  Module i2c-voodoo3: Flush posted writes
1251  Module ds1307: New
1252  Module lm92: New
1253  Module smbus-arp: new
1254  Module smsc47m1: new
1255  Module via686a: Add support for VT8231 sensors
1256  Module vt1211: new
1257  Module w83781d: Add multiple VID version support; fix temp alarms
1258  Program eeprom: new
1259  Program i2cdump: Add smbus block command specification, add PEC support
1260  Program lm_sensors.init: new
1261  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1262                   pcf8574, pcf8591, smsc47m1, vt1211
1263  Program p4b_smbus: Add support for ICH4
1264  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1265  Program sensord.init: Renamed, was prog/init/sensors
1266  Program sensord: Major update, now requires rrd source;
1267                   not compiled by default
1268  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1269                   (don't display algo. and adap.) option;
1270                   add vt1211, smsc47m1, lm92
1271  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1272                          add 82801DB, LM85; fix perl warnings;
1273                          generate /etc/sysconfig/lm_sensors for
1274                          lm_sensors.init script
1275
12762.6.3 (20020322)
1277  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1278  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1279  File doc/chips/it87: add more temp_type help
1280  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1281                        add adm1021 section; add lm87 AIN[1,2] template;
1282                        swap negative voltage limits for 782d,783s,627hf,
1283                        697hf,it87; add more it87 help; swap neg. voltage
1284                        limits for lm78(-j), lm79, w83781d, as99127f
1285  Library: Add PCF8591, W83697HF, ADM1023 support;
1286           fix w83* fan_min computes;
1287           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1288  Module adm1024: Add MODULE_LICENSE("GPL")
1289  Module bt869: Add s-video out and DVD resolution support
1290  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1291  Module fscscy: implement min/max for voltages and fans
1292  Module i2c-amd756: Add support for AMD768
1293  Module i2c-i810: Add support for 810E
1294  Module i2c-keywest: Big update, sync with kernel 2.4.18
1295  Module i2c-piix4: Check for uninitialized base address
1296  Module i2c-sis5595: Blacklist 645, 735
1297  Module i2c-viapro: Check for uninitialized base address
1298  Module gl518sm: Standardize /proc entries in0-3
1299  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1300               fan -> fan1; fix temp2 limit writes
1301  Module pcf8574: Add support for PCF8574A; /proc interface changed
1302  Module pcf8591: new
1303  Module sis5595: Blacklist 645, 735
1304  Module w83781d: Add W83697HF support; allow force_subclients parameter
1305                  for Tyan 2460
1306  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1307  Program decode-vaio.pl: new
1308  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1309                   add text output
1310  Program init/sensors: New SysV init script
1311  Program mkpatch.pl: Add support for fscscy, add more help entries
1312  Program p4b_smbus: new
1313  Program rrd: Install summ_week.cgi
1314  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1315                   clean up chassis intrusion prints
1316  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1317                          fix Via686a and it87 detection;
1318                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1319                          fix uninitialized values; it87 beats lm78
1320
13212.6.2 (20011118)
1322  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1323  Chip Modules (all): malloc.h -> slab.h
1324  Modules (all): Add MODULE_LICENSE("GPL")
1325  File doc/FAQ: More updates and additions
1326  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1327  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1328           update it87 alarm ID's.
1329  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1330  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1331  Module i2c-amd756: Improve busy handling/printk's
1332  Module i2c-i801: Add 82801CA/CAM support
1333  Module i2c-keywest: Sync with PPC people, it works now
1334  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1335  Module i2c-viapro: Add Via VT8233 support
1336  Module it87: Merge alarm_* /proc entries to alarms
1337  Module sis5595: Fix support for rev B0
1338  Module via686a: Make limit initializations reliable
1339  Module w83781d: Allow init=0 parameter to bypass initialization
1340  Program isadump: Add flat address space (PCI) support
1341  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1342                      fscpos, it87, maxilife, mtp008
1343  Program sensors: Fix w83781d temp precision
1344  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1345                          Fujitsu Poseidon and Scylla,
1346                          Intel 82443MX and 82801CA/CAM detection,
1347                          add ITE 8172G detection (driver in kernel 2.4.10)
1348
13492.6.1 (20010830)
1350  File BUGS: Updated
1351  File doc/FAQ: More updates and additions
1352  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1353  File sensors.conf.eg: Fix/enhance it87 section
1354  Library: ds1621 and it87 updates
1355  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1356  Module i2c-amd756: Add AMD 766 support
1357  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1358  Module i2c-piix4: Add Serverworks CSB5 support
1359  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1360  Module adm1025: Fixed temp2 min/max writes
1361  Module ds1621: Add 12-bit precision mode
1362  Module it87: Enable all alarms, add in8 support, add sensor type selection
1363  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1364                  remove support for module
1365  Module sis5595: Recognize unsupported chips and refuse to load
1366  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1367  Program eepromer: new
1368  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1369                      of sensors.c as a module in kernel
1370  Program sensors: it87 updates; adjust temp. precision for some chips
1371  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1372                          recognize unsupported SiS chips;
1373                          recognize AMD 766 and Serverworks CSB5.
1374
13752.6.0 (20010612)
1376  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1377        If your make fails because it can't find <linux/i2c-proc.h>, you
1378        forgot this step!!!
1379  File doc/FAQ: Many, many updates and additions
1380  File doc/busses/i2c-sis5595: new
1381  File doc/busses/i2c-tsunami: new
1382  File doc/chips/it87: new
1383  File doc/chips/via686a: Claim support for 686b.
1384  File README.thinkpad: new
1385  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1386                        Add lm87, adm9240, ds1780, lm81 templates;
1387                        Enhance help comments in file;
1388                        Add Tyan S2510 dual-MTP008 example;
1389                        Make separate sis5595 section.
1390  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1391  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1392  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1393           Add support for maxilife-nba and amd1024;
1394           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1395  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1396  Chip Modules (all): Change from sensors_* to i2c_* globals
1397                      for new i2c-proc.[ch]
1398  Makefiles: enhance to support Alpha architecture
1399  Module adm1021: Fix lm84 and gl523sm support
1400  Module adm1024: new
1401  Module i2c-i801: Chip detection cleanup
1402  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1403  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1404  Module i2c-tsunami: New
1405  Module i2c-via: Ensure i2c bus is tristated correctly.
1406  Module it87: new driver for IT8705, IT8712, Sis950 chips
1407  Module lm78: Recognize chipid=0x20
1408  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1409  Module mtp008: Fix temp initializations;
1410                 Save BIOS pin configuration of temps and fans;
1411                 Fix sensor type reads/writes and fan min writes;
1412                 Fix spurious invalid sensor type messages
1413  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1414                  used for patched kernel now.
1415                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1416  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1417                  Allow force_addr=0xaddr
1418  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1419  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1420                  reading changes; Add messages for subclient
1421                  registration failure
1422  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1423  Program i2cset: new
1424  Program isadump: fix for Alpha arch. compiles
1425  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1426                      Remove ltc1710; Fix i2c_sis5595 typo;
1427                      Support kernel 2.4.5 makefile change;
1428                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1429  Program sens_update_rrd: new
1430  Program sensord: Add -d (debug) and -p (pid-file) options
1431  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1432                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1433                   Change mtp008 temps from max/min to limit/hyst;
1434                   Add maxilife-nba, adm1024, it87 support.
1435  Program sensors-detect: Recognize lm78 with chipid=0x20;
1436                          Recognize SMSC Victory66 South Bridge;
1437                          Add devfs /dev/i2c/x support;
1438                          Add adm1024, it87xx support; Add thinkpad warning.
1439  Program tellerstats: new
1440
14412.5.5 (20010115)
1442  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1443        you have kernel 2.4.0-prerelease or greater.
1444  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1445  File doc/developers/proc: new
1446  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1447  Library: Add ds1621, mtp008 support
1448  Module adm1021: Add support for adm1021a / adm1023
1449  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1450  Module adm1025: Add support for remote temp; rename /proc entries to
1451                  in[0-5] and temp[1-2]; fix negative temp readings
1452  Module adm9240: Rename /proc entries to in[0-5]
1453  Module ddcmon: allow force and force_ddcmon parameters
1454  Module ds1621: new
1455  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1456  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1457  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1458  Module lm87: cleanup, update voltage calculations
1459  Module mtp008: new
1460  Module pcf8574: change update time to 5 seconds
1461  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1462  Module w83781d: fix beep setting via /proc
1463  Programs editticket, readticket: new
1464  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1465  Program mkpatch.pl: more fixes; now adds many more modules
1466  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1467                   add adm1025 temp2; report temp limits correctly as
1468                   min/max or limit/hysteresis; print message if no
1469                   sensors are found. Removed false errors from lm87 reads.
1470  Program sensors-detect: Add ds1621, mtp008 detection;
1471                          add ServerWorks detection
1472
14732.5.4 (20001012)
1474  Module i2c-viapro: Add support for Via 596B (0x3051)
1475  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1476  Program mkpatch.pl: fixed infinite loop
1477  Program sensors-detect: Detect Via 596B (0x3051)
1478
14792.5.3 (20001008)
1480  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1481  File useful_addresses.html: update
1482  Library: Add lm87 support
1483  Module pcf8574: new
1484  Module i2c-ali1535: new
1485  Module i2c-ali15x3: removed force #ifdef.
1486  Module i2c-i801: support Intel 82801BA (815E chipset)
1487  Module i2c-i801: add i2c block write support, fix smbus block bugs
1488                   (requires i2c 2.5.3 package)
1489  Module i2c-i810: support Intel 82815
1490  Module lm87: new
1491  Module sensors: Fix for kernel 2.4.0-test8
1492                  (remove copy_to_user_ret and put_user_ret)
1493  Module w83781d: limit fan divisors to 8 max. for as99127f
1494  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1495  Program i2cdump: Add smbus block read support
1496  Programs i2cdetect, i2cdump: Improve error reporting
1497  Program sensors: new switch -u (--unknown)
1498  Program sensors-detect: detect Intel 82801BA (815E chipset)
1499  Program sensors-detect: detect Intel 82815
1500  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1501  Program sensors-detect: detect National LM87
1502  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1503  Program sensors-detect: Improve error reporting
1504
15052.5.2 (20000709)
1506  File sensors.conf.eg: Fix lm80 in8 calculation
1507  Module w83781d: W83783S no longer crashes on unloading
1508  Program sensors-detect: more robustness in case of unknown i2c adapters
1509  Program sensors-detect, libsensors: fix eeprom size reporting
1510  Program sensord: more flexibility, support for alarm scanning etc.
1511  Program sensors: support for ignore setting on sensor alarms.
1512  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1513
15142.5.1 (20000618)
1515  Library: Add adm1025 support
1516  Module adm1025: new
1517  Module ddcmon: Fixed bus scan which could hang SMBus
1518  Module i2c-keywest: new
1519  Module maxilife: Add support for Maxilife '99 (NBA)
1520  Module via686a: Enable sensors if not enabled by BIOS
1521  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1522  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1523  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1524  Module w83781d: Fis as99127f fan speed (was 66% too high)
1525  Module w83781d: Improve beep input checking
1526  Program i2cdump: Add Winbond-style bank selection
1527  Program isadump: Add Winbond-style bank selection
1528  Program sensors: Add adm1025 support.
1529  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1530  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1531  File sensors.conf.eg: Add Maxilife '99 entries
1532  File sensors.conf.eg: Remove some as99127f entries.
1533    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1534          won't reinstall it) or else 'sensors -s' will fail.
1535
15362.5.0 (20000312)
1537  Dropped all kernel 2.0 and 2.1 compatibility
1538  Module i2c-i810: new
1539  Module ddcmon: new
1540  Module via686a: new
1541  Module i2c-amd756: fixed region request
1542  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1543  Module w83781d: Don't change pin settings at initialization;
1544                  also fix chip detection.
1545  Library: Support for ddcmon and via686a
1546  Program sensors-detect: Support for ddcmon and via686a
1547  Program sensors: Support for eeprom, ddcmon and via686a
1548
15492.4.5 (20000116)
1550  Introduced DESTDIR installation prefix
1551  Module lm80: fixes, temperature now read and set correctly
1552  Module i2c-voodoo3: driver enhancements
1553  Module w83781d: fixes, AS99127 works much better now
1554  Library: New ignore keyword in config file
1555  Programs: Support for new ignore keyword
1556  Program sensors-detect: Support for MGA detections
1557
15582.4.4 (19991201)
1559  Addition of the alpha release of AMD 756 SMBus host support.
1560  Many fixes and updates to the gl518sm driver
1561  Updates and fixes for device detection
1562
15632.4.0 (19990920)
1564  Too much to list.
1565  i2c and smbus parts are split off to a separate i2c package.
1566  New drivers and other stuff.
1567
15682.3.4 (19990616)
1569  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1570  All: Now compiles against kernel 2.0.x (again ;)
1571  Module gl518sm: some updates and refinements
1572
15732.3.3 (19990603)
1574  All: Now compiles against kernel 2.3.x (x >= 1)
1575  Module i2c-voodoo3: Timing issue fixes
1576  Module bt869: Seems to be functional and relatively well tested
1577  Many modules were modified to be more compatible with the new
1578   Mutex structure in the new experimental kernels.
1579
15802.3.2 (19990507)
1581  Module i2c-hydra: Now compiles on 2.0.x kernels
1582  Module i2c-lm75: Slightly better detection
1583  * New, but not compiled by default:
1584  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1585  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1586
15872.3.1 (19990501)
1588  All: Now compiles on PPC
1589  Module i2c-hydra: NEW
1590  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1591  Module w83781d: Removed deadlock (mutex was not initialized)
1592  Documentation: A few glitches removed
1593  Makefile: default module installation directory is now
1594            /lib/modules/current/extra/misc
1595  Program sensors-detect: PPC Hydra now detected
1596  Program sensors: Now prints complete GL518SM information
1597  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1598
15992.3.0 (19990422)
1600  All: Many, many changes and improvements
1601  All: Many small bugs and problems removed
1602  Modules: New insmod parameters
1603  Modules: Much improved chip detection
1604  Module maxilife: NEW
1605  Module adm1021: MAX1617A now also supported
1606  Module adm9240: DS1780 now also supported
1607  Module w83781d: W83782D and W83783S now also supported
1608  Program sensors-detect: NEW
1609  Library: All chips now supported
1610  Documentation: Very much improved
1611
16122.2.2 (199903??)
1613  Just some minor updates and bug fixes.
1614
16152.2.1 (19990218)
1616  All: Removed compile warnings
1617  Module i2c-dev: Small bug removed if DEBUG=1 was used
1618  Module sis5595: Now compiles for 2.0 kernels
1619  Module adm1021: Detection corrected
1620
16212.2.0 (19990216)
1622  All: Set copyrights to include 1999
1623  All: Small bugfixes
1624  I2C: Upgraded to newest archive of Simon Vogl
1625  Module i2c-dev: NEW
1626  Module i2c-ali15x3: NEW
1627  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1628     directories, and somewhat improved
1629  Module sis5595: NEW
1630  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1631  Library: Support for new chip drivers, several small bugs fixed
1632  Library manual pages: NEW
1633  Program i2cdetect: Moved to detect directory
1634  Program detect.pl: NEW
1635  Program doc-features: NEW
1636  Program sensors: Added man-page
1637  Document BUGS: Added cdrom bug and kernel i2c conflict
1638
16392.1.2 (19990116)
1640  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1641  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1642  Documentation in doc/kernel: NEW
1643
16442.1.1 (19990107)
1645  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1646                     and older
1647  Module gl518sm.o: Miscelaneous bugs and problems solved
1648  Program isadump: NEW
1649
16502.1.0 (19981230)
1651  Library: Completely NEW
1652  Program sensors: NEW
1653  Program grab_busses: NEW
1654  Program decode-dimms: More information
1655  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1656  Module w83781d.o: NEW
1657  Module lm80.o: NEW
1658  Module gl518sm.o: new procfile beep, several small updates
1659  Modules: Now use pin readings, no more scaling within the kernel (use the
1660           library instead)
1661
16622.0.2 (19981214)
1663  Module eeprom.o: NEW
1664  Program decode-dimms: NEW
1665  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1666           2.1.58
1667  Modules: Somewhat less verbose on transfers
1668  Module lm78.o now recognizes and handles lm78-j and lm79
1669
16702.0.1 (1998121?)
1671  Module gl518sm.o updates, to make it actually work
1672  Module lm75.o high/low-byte swapping write bug fixed
1673
16742.0.0 (19981209)
1675  Initial release
Note: See TracBrowser for help on using the browser.