root/lm-sensors/branches/lm-sensors-3.0.0/CHANGES @ 4735

Revision 4735, 82.2 KB (checked in by khali, 7 years ago)

Add support for the Intel Tolapai SMBus controller. Patch from Jason Gaston.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
4SVN HEAD
5  File BUGS: Delete
6  File i2c-dev.h: Support I2C block reads with specified length
7  All bus modules and documentation: Delete
8  All chip modules and documentation: Delete
9  Legacy hotplug modules and documentation: Delete
10  File doc/version-2: Delete, obsolete
11  File sensors.conf.eg: Add a dme1737 section
12  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
13  File README.patches: Delete, obsolete
14  Library: Clean up pwm symbol names translation
15           Always build with sysfs support
16           Delete procfs and sysctl support (Linux 2.4)
17           Delete all remnants of algorithm names
18           Drop all the chip-specific support
19           Fix a memory leak on error
20           Speed up sensors_get_ignored() a bit
21           No longer export sensors_chip_name_has_wildcards()
22           Delete sensors_do_all_sets(), unused
23           Pass structures by reference
24           Drop support for dummy type
25           New function sensors_snprintf_chip_name()
26           Drop support for dashes in chip names
27           Add support for devices on SPI adapters
28  Makefile: Drop the package and version targets
29  Man pages: Drop "conforming to" sections
30  Man page sensors.conf.5: Update the chip statement section
31  Programs doc/*: Delete, obsolete
32  Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
33  Program i2cdump: Use the new I2C block read function
34  Program isadump: Detect when address bit 7 is a busy flag
35                   Fix Super-I/O exit sequence for Winbond/Fintek chips
36  Program matorb/displayit: Delete, obsolete
37  Program mkdev.sh: Delete, obsolete
38  Program mkpatch: Delete
39  Program fancontrol: Use let for arithmetic evaluation
40                      No longer need awk and grep
41                      Limit calls to external programs (Linux 2.6 only)
42                      Check for configuration file validity
43                      Support optional min and max PWM values
44                      Better integration with init scripts
45                      Use linear control instead of quadratic
46  Program fancontrol.pl: Delete, redundant
47  Program pwmconfig: Use smaller steps for low PWM values
48                     Support optional min and max PWM values
49  Program rrd: Support only hwmon class devices
50               Look for rrd in /usr/bin by default
51               Add missing shell declarations
52               Update URI
53  Program sensors: Drop all the chip-specific support
54                   Fix alignment of alarm for one-limit temperatures
55                   Drop option -U
56                   Fix a memory leak on error (with -u)
57  Program sensors-detect: Stop Super-I/O probe after first family success
58                          Fix SMSC DME1737 detection
59                          Add /usr/sbin to the PATH (#2199)
60                          Add ATI SB700 detection
61                          Add Maxim MAX6680/MAX6681 detection
62                          Add IT8726F detection
63                          Fix IPMI support for 2.6 kernels
64                          Add detection for non-standard SMSC Super-I/Os
65                          No longer depend on i2cdetect
66                          Add SMSC SCH5317 detection
67                          Drop detection of most non-sensors I2C chips
68                          Fix ADM1022 detection
69                          Add detection of many SMSC Super-I/O chips
70                          Add Fintek F71806FG and F71862FG detection
71                          Add Winbond W83L786NR/NG/R/G detection
72                          Add Winbond W83L771W/G detection
73                          Add Intel Tolapai SMBus detection
74
75
762.10.3 (20070319)
77  Library: Do not skip i2c adapters with only a class device and no
78            physical device. This change is required to survive the
79            planned struct class_dev removal from future 2.6 kernels.
80           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
81           Recognize i2c-isa-based devices as such even after class_dev
82            is gone
83           Compile with -D_REENTRANT
84           Fix support of Linux 2.6's max6650 driver
85           Fix max1619 support
86  Man page i2cdetect.8: Scanning range can be restricted
87  Module bmcsensors: Fix debugging messages
88  Module i2c-ali1563: Improve the status messages (2.6 backport)
89                      Fix device initialization (2.6 backport)
90  Module i2c-amd8111: Cleanups (2.6 backport)
91                      Fix initialization race (2.6 backport)
92  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
93  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
94  Module i2c-viapro: Add CX700 support (2.6 backport)
95  Module smsc47m1: Add SMSC LPC47M292 support
96                   Get rid of a useless semaphore (2.6 backport)
97  Programs i2cdetect, i2cdump, isadump: Flush output in real time
98  Program i2cdump: Cleaner output in SMBus block read mode
99  Program fancontrol.pl: Fix pwmN_enable access (#2190)
100  Program sensors: Add smsc47m2 support (fans)
101                   Fix -A option (hide adapter name) on error
102  Program sensors-detect: Only probe relevant I2C addresses
103                          Drop ARP-capable device detection
104                          Add Maxim MAX6655/MAX6656 detection
105                           (Olexiy Avramchenko)
106                          Add Maxim MAX1668, MAX1805, MAX1989 detection
107                          Add VIA CX700 detection
108                          Drop legacy W83627HF ISA detection
109                          Don't bufferize stdout during probes
110                          Speed up the LM75 and LM77 detection
111                          Clean up the EEPROM detection
112                          Add Dallas DS75 detection
113                          Add SMSC LPC47M292 detection
114                          Add nVidia MCP61 and MCP65 detection
115                          Fix ADM1028 detection
116                          Add Nat. Semi. PC8347L Super-I/O detection
117                          Add SMSC SCH5504 Super-I/O detection (no sensors)
118                          Make the LM78 and W83781D detection safer
119
120
1212.10.2 (20070115)
122  RPM: Obsolete, removed
123  File doc/fan-divisors: Update
124  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
125  Library: Add support for the pc87247 driver (fans only)
126           Probe for busses before chips
127           Drop support for algorithm names
128           Add support for coretemp driver   
129           Major update/optimization of config-file scanner
130           Add config-file scanner regression tests
131           Add f71872f support
132           Add w83627dhg support (David Holl, #2157)
133           Get the i2c adapter names from classdev.name
134           Add adm1029 support (Corentin Labbe)
135  Man page i2cdetect.8: Describe the output convention
136  Man page sensors.1: Update (option -c) and clean up
137  Module bmcsensors: Fix several warnings
138                     Fix fragile structure initialization
139  Module i2c-i801: Add ICH9 support
140  Module p4b_smbus: Add support for the ICH5
141  Module f71805f: Fix the device address decoding (2.6 backport)
142  Module icspll: Delete. It was useless and dangerous.
143  Program decode-dimms.pl: Remove spaces at end of lines
144  Program eepromer: Fix loads of warnings
145  Program i2cdetect: Make the output clearer
146  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
147  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
148                            without need of recompilation.
149  Programs dump/*: More robust handling of user inputs
150  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
151                                  Add support for non-i2c drivers
152  Program fancontrol.pl: Disable debugging by default
153                         Add support for non-i2c drivers
154                         More tolerant config file parsing
155  Program sensord: Add pc87247 support (fans only)
156                   Add vt1211 support (#2150)
157                   Add w83627dhg support (David Holl, #2157)
158                   Add w83627ehf voltage support (Dave Platt)
159                   Add k8temp support (Dave Platt)
160  Program sensors: Add pc87247 support (fans only)
161                   Hide error on missing f71805f fan
162                   Handle option -c more efficiently
163                   Drop option -a (show algorithm names)
164                   Add f71872f support
165                   Add w83627dhg support (David Holl, #2157)
166                   Add adm1029 support (Corentin Labbe)
167                   Hide error on missing w83793 temp (Gong Jun)
168  Program sensors-detect: Add SMSC DME1737 detection
169                          Add Fintek F71882FG and EPoX EP1308 detection
170                          Add Intel Core thermal sensor detection
171                          Preallocate memory for I2C_FUNCS ioctl (#2138)
172                          Prevent misdetection of MAX6633/MAX6634/MAX6635
173                          Add Intel ICH9 detection
174                          Add Maxim MAX6648/MAX6692 detection
175                          Improve ADM1029 detection
176                          Add Andigilog chips detection
177                          Add Intel AMB FB-DIMM thermal sensor detection
178                          Add ATI SB600 detection
179
180
1812.10.1 (20060924)
182  File doc/developers/checklist renamed to dev/developers/release_checklist
183          with clarifications and updates for new SVN server.
184  File README.package: Delete.
185  File doc/busses/i2c-piix4: Update (2.6 backport)
186  File doc/developers/sysfs-interface: Update
187  File etc/sensors.conf.eg: Add an smsc47m192 section
188                            Comment out all set statements
189                            Add an it8716 section
190                            Add a w83793 section
191                            Adjust the vt1211 section to match the new driver
192                             interface
193  Library: Fix device scan when no i2c support is present
194           Add support for W83627EHF voltage inputs and alarms
195           Add support for the smsc47m192 driver
196           Fix all memory leaks (yeah!)
197           Fix no sensors being reported as an error
198           Add support for the IT8716F and IT8718F chips
199           Add support for the W83793 chip (Yuan Mu)
200           Map the 2.6 adm1026's fan8 to fan0
201           Missing sysfs busses and classes are not errors
202           Change vt1211 temp3-7 magnitude from 1 to 3
203  Makefile: Don't grep autoconf.h on user-space targets
204            Fix depmod on non-running kernel version
205            Remove empty include directories on make user_uninstall
206  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
207  Module i2c-amd756-s4882: Improve static semaphore initialization
208                           (2.6 backport)
209  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
210                   Add ICH8 support (2.6 backport)
211                   Fix block transaction poll loops (2.6 backport)
212                   Remove PCI function check (2.6 backport)
213                   Cleanups (2.6 backport)
214  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
215  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
216                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
217                    Drop the fix_hstcfg parameter (2.6 backport)
218  Module i2c-viapro: Fix compilation with kernels < 2.4.21
219                     Add VT8237A and VT8251
220  Module lm83: Add LM82 support (2.6 backport)
221  Module vt1211: The VT1211 has no in6
222                 Rework the voltage and temperature conversions and the
223                  temperature input order to match the Linux 2.6 driver
224  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
225                  Add specific alarm and beep defines for the W83791D
226  Module w83792d: Fix PWM range (2.6 backport)
227  Program decode-dimms.pl: Decode depending on the memory type
228                           Decode the manufacturing date to an ISO8601 date
229                           Add the memory size computation and provide brief
230                            timing characteritics for SDRAM/DDR/DDR2 memory
231                           Add memory size computation for Rambus memory
232                           Various output cleanups and fixes
233  Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
234  Program decode-vaio.pl: Detect and skip false positives
235  Program i2cdetect: Add a mode to print adapter functionalities
236  Program i2cdump: Restore bank after bank switching
237                   Add new mode W (read word on even register addresses)
238  Program mkpatch: Fix typo breaking f71805f
239                   Turn warnings on (-w), and fix them
240                   Print a usage message on missing command line parameters
241  Program pwmconfig: Use mktemp instead of tempfile
242  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
243                   Add smsc47m192 support
244                   Add abituguru support (Hans de Goede)
245                   Fix memory leak when printing an unknown chip
246                   Add it8716 and it8718 support
247                   Make each it87 fan and fan div optional
248                   Print missing w83791d values
249                   Add w83793 support (Yuan Mu)
250                   The adt7463 may not have in4 (#2119)
251                   Hide more vt1211 missing input errors
252                   Clearer error messages when no sensors found
253  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
254                          Add ATI IXP200/300/400 SMBus detection
255                          Prevent warning on 64-bit PCI addresses
256                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
257                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
258                           F75384S/M, F75387SG/RG and F81218D detection
259                          Add Winbond W83793R/G and W83627DHG detection
260                          Handle the W83791D driver difference between kernels
261                          Add nForce4 MCP04, MCP51 and MCP55 detection
262                          Add AMD Geode devices detection
263                          Add ITE IT8716F and IT8718F detection
264                          Add NatSemi/Winbond PC87427 detection
265                          Get driver information for busy addresses from
266                           sysfs (2.6 only)
267                          Drop the ISA IT87xxF detection
268                          Check i2c adapter functionalities before probing
269                          Add Intel ICH8 SMBus detection
270                          Add AMD K8 thermal sensors detection
271                          Simplify detection of SiS5595, VIA686 and VT8231
272                          Add Analog Devices ADM1033, ADM1034, ADT7462,
273                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
274                          Check for root user at startup
275                          Attempt to be slightly more user-friendly
276                          Add VT8237A and VT8251
277                          Remove detection of nVidia graphics adapters
278                          Use sysfs for PCI device enumeration
279                          Add generic PCI SMBus adapter detection
280                          Add generic Super-I/O logical device detection
281                          Add SMSC LPC47M172/182 detection
282
283
2842.10.0 (20060214)
285  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
286  File doc/busses/i2c-viapro: Update (2.6 backport)
287  File doc/chips/via686a: Update (2.6 backport)
288  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
289  File etc/sensors.conf.eg: Do not set vrm by default
290  File i2c-dev.h: Fix union i2c_smbus_data definition
291                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
292                  Add missing parentheses around macros
293                  Drop I2C_FUNC_SMBUS_EMUL
294                  Drop I2C_FUNC_SMBUS_*_PEC
295                  Drop I2C_SMBUS_*_PEC
296  File sensors_vid.h: Drop default VRM
297  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
298           This is intentional.  Use decode-dimms.pl if you still
299           need your memory SPD data.
300  Library: Big update to use libsysfs.  More TODO though.
301           Fix bus matching code for Linux 2.6 (Karsten Petersen)
302           Add f71805f, w83687thf support
303           Add platform drivers support
304           Fix sysctl warnings on x86_64
305           Restore vt1211 temp1
306  Makefile: Compile user-space programs with -Wundef
307  Module i2c-i801: Simplify the hardware PEC code
308                   Always set PEC mode explicitly before each transaction
309  Module i2c-i810: Documentation update, PCI IDs cleanup
310  Module i2c-keywest: Remove bus probing code (2.6 backport)
311  Module i2c-nforce2: Remove dead code (2.6 backport)
312                      Add the ID of the nForce4 MCP-04 (2.6 backport)
313  Module i2c-via: Remove dead code
314  Module i2c-viapro: Remove dead code
315                     Support I2C block read (2.6 backport)
316                     Code cleanups (2.6 backport)
317                     Improve debug register dump (2.6 backport)
318  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
319          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
320          i2c-sis645: Use pci_driver name to request I/O region; do
321                      not initialize i2c_adapter name to "unset" (2.6
322                      backport)
323  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
324                                              (2.6 backport)
325  Module adm9240: Cleanups (2.6 backport)
326  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
327  Module it87: Minor cleanups
328               Fix fan3_div setting bug (Anton V. Staaf)
329  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
330               Separate the register read function
331               Add PEC support for the ADM1032
332  Module via686a: Cleanups
333  Module w83627hf: Drop useless initialization step (2.6 backport)
334                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
335                   Fix alarms (Yuan Mu)
336                   Preserve fan min on fan div change (Yuan Mu)
337                   Properly handle W83627THF without VID (Yuan Mu)
338                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
339                   Add W83687THF support
340  Module w83781d: Drop W83697HF support (Grant Coady)
341  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
342                  Fix fan control mode (PWM/DC) reporting
343                  Fix fan div auto-adjust (Yuan Mu)
344                  Fix the subclient handling
345  Module w83l785ts: Minor cleanup (2.6 backport)
346  Module vt1211: Restore temp1
347  Modules vt1211, vt8231: Change default VRM to 9.1
348  Program decode-dimms.pl: Add lookup tables for manufacturer names
349                           Fix rounding error in PCxxxx speed computation
350                           Improve text output
351                           Improve speed under Linux 2.6
352                           Verify checksum before decoding anything
353                           Improve manufacturing location decoding
354                           Improve memory type detection
355                           Improve part number decoding
356  Program i2cdump: Drop now useless #ifdef tests
357                   Fix capability check for continuous byte mode
358  Program i2cget: New
359  Program i2cset: Add PEC support
360                  Fix argc check
361  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
362                                       Print the correct bus type if bus
363                                       functionality can be queried
364  Program isadump: Display the real addresses in flat mode
365  Program mkdev.sh: Silently skip already existing nodes
366  Program mkpatch: Include f71805f
367  Program sensord: Do not log algorithm names
368                   Drop EEPROM support (Aurelien Jarno)
369                   Add W83627EHF, F71805F/FG support
370                   Fix PC87365/PC87366 alarms
371  Program sensors: Drop free_the_label
372                   Fix compilation with uclibc (no iconv)
373                   Add f71805f, w83687thf support
374  Program sensors-detect: Drop algorithm names
375                          Do not rely on i2cdetect -l printing algo names
376                          Simplify adapter name matching mechanism
377                          New address for ADM1032, ADT7461
378                          Improve ADT7467, ADT7468 support
379                          Fix MAX6659 reported driver
380                          Add Fintek F71805F detection
381                          Add Analog Devices ADT7476 detection
382                          Add Intel 82845G detection
383                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
384                          Fix udev detection in some corner case
385                          Improve DS1621 detection
386                          Always prefer ISA access over SMBus access
387
388
3892.9.2 (20050906)
390  File doc/chips/*: Big update (2.6 backport)
391  Library: Drop ds1780-specific code (now use adm9240)
392           Fix memory leak in sensors_get_label()
393           Support /sys/class/hwmon (Linux 2.6.14+)
394           Limit stack usage in sensors_read_proc_chips()
395  Makefile: Detect 2.6+ kernels and check targets
396  Man page isaset.8: Fix typos
397  Module adm1031: Fix broken kfree() calls
398  Module i2c-ali1563: New (2.6 backport by Winbond)
399  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
400  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
401          w83627hf.c: Tag find function __init
402  Module lm93: Fix memory leak
403  Module smsc47m1: Fix PWM enable polarity on read
404  Modules w83627hf, w83781d: Allow setting fan divisor to 128
405  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
406                           Added DDR/DDR2 frequency reporting in convenient
407                           form of DDRxxx PCyyyy
408  Program i2cdump: Properly handle short i2c block reads
409  Program fancontrol.pl: Fix compile errors
410  Program mkpatch: Include i2c-ali1563
411                   Include w83792d
412  Program pwmconfig: Fix unsafe temporary file use
413  Program rrd: Support 2.6 kernels
414  Program sensord: Add support for w83637hf
415                   Support pc87360 (Henrik Brix Andersen)
416  Program sensors: Support the VAIO "VGN" prefix for eeprom
417  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
418                          Advertise the w83792d driver
419                          Improve IT8705F and IT8712F detection
420                          Merge LM82 and LM83 detection
421                          Add W83687THF detection
422
423
4242.9.1 (20050412)
425  File doc/busses/i2c-nforce2: Update
426  File doc/chips/it87: Update
427  File doc/chips/lm90: Update for adt7461
428  File doc/chips/mic74: New
429  File etc/sensors.conf.eg: New sections for lm92 and w83792d
430  Library: Add support for 2.6 fscpos driver (Stefan Ott)
431           Fix sis5595 in4 (Aurelien Jarno)
432           Add support for 2.6 gl520sm driver (Maarten Deprez)
433           Add support for 2.6 bmcsensors driver (Yani Ioannou)
434           Add support for w83792d (Chunhao Huang/Winbond)
435           Add support for 2.6 adt7461 (James Chapman)
436           Add support for 2.6 lm92
437           Add support for 2.6 vt1211
438           Add preliminary support for 2.6 w83627ehf
439  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
440            Use -fno-strict-aliasing on all architectures
441  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
442  Module bmcsensors: Fix compile error
443                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
444  Module ds1621: Fix detection (Aurelien Jarno)
445  Module eeprom: Discard SPD-centric checksum module parameter
446                 Cleanup detection function (backport from Linux 2.6)
447  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
448  Module i2c-i801: Temporarily disable broken I2C block read
449  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
450                   Gelato)
451  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
452  Module i2c-viapro: Prevent repeated resets
453  Module it87: Improve Super-I/O detection
454               Limit I2C address range
455               Support VID on the IT8712F
456  Module lm75: Only initialize CMP/INT bit
457  Module lm78: Fix bug with setting negative temperature limits
458  Module lm85: Properly differentiate between ADM1027 and ADT7463
459               Add EMC6D102 support
460  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
461               Add limited ADT7461 support
462  Module lm93: Fix IN10 (+5V) scaling
463  Module mic74: New
464  Module w83627hf: Support secondary Super-I/O address
465                   Enable temp2 and temp3 if they are disabled
466  Module w83781d: Revert AS99127F temp2 and temp3 computation change
467                  Skip final initialization step for AS99127F chips
468  Module w83792d: New (Chunhao Huang/Winbond)
469  Program ddcmon: New; user-space replacement for the ddcmon driver
470  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
471  Program isadump: Handle Super-I/O keys
472  Program lm_sensors.init: Cleanups (Axel Thimm)
473  Program mkdev.sh: Add basic command-line interface
474  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
475  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
476                     Don't complain about read-only enable files (lm85)
477                     Fix handling of alternate config file name
478  Program sensord: Fix erroneous error message (Aurelien Jarno)
479                   Support sis5595 in4 (Aurelien Jarno)
480                   Support w83627thf
481                   Support the separate it8712 prefix (Aurelien Jarno)
482  Program sensors: Display sis5595 in4 (Aurelien Jarno)
483                   No errors on missing pc87360 fans
484                   Add gl520sm support (Maarten Deprez)
485                   Improve vt1211 error/ignore handling (Michael Carland)
486                   Support w83792d, w83627ehf
487  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
488                          Improve IT8705F and IT8712F detection
489                          Improve udev detection
490                          Fix DS1621 detection
491                          Add W83627EHF detection
492                          Add ATI SMBus detection
493                          Add VT1211 alias detection
494                          Warn if chip modules not found
495                          Add i2c-ipmi to list if bmcsensors is on it
496                          Add PC87591 detection
497                          Search for correct udev db file name
498                          Add nForce3 250Gb and nForce4 detection
499
500
5012.9.0 (20041228)
502  NOTE: Requires i2c-2.9.0 or newer!
503  File README.thinkpad: Update
504  File doc/chips/it87: Cleanups
505  File doc/chips/lm63: New
506  File etc/sensors.conf.eg: Set via686a voltage limits
507  File kernel/chips/Module.mk: Resync module list with mkpatch
508  File kernel/include/sensors_compat.h: Define __devexit_p if missing
509                                        (kernels 2.4.16 and older)
510  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
511                             and dec_use removed in release 2.8.0
512  Modules (all chip drivers): Remove owner from i2c_driver; pass
513                              controlling_mod to i2c_register_entry() again
514  Module bmcsensors: Support function 1/x
515  Module i2c-amd756: Display the real bus name
516  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
517  Module i2c-i801: Support i2c block read (ICH5 and higher)
518                   Add PEC support for ICH6
519                   Add support for ICH7
520  Module i2c-ipmb: Remove from build since it doesn't work
521  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
522  Module icspll: Fix compilation
523  Module lm63: New driver for the National Semiconductor LM63
524  Module lm83: Use signed types for temperatures
525               Check limits on register writes
526  Module lm87: Round voltages properly
527               Retry on read errors (David Knierim)
528               Less agressive init (no reset)
529  Module lm90: Use signed types for temperatures
530               Check limits on register writes
531  Module lm93: Added module parameter for VID pin input thresholds.
532               Fix typo in dynamic VID alarms
533               Adds a couple log messages for failed transactions (David
534               Knierim)
535               Fix compilation breaking C99-ism (Axel Thimm)
536               Fix block read retries
537  Module pc87360: Support secondary Super-I/O address
538  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
539  Library: Add lm63 support
540           Add lpc47b397 support
541  Programs *.init: Rename lockfile to match file name
542  Programs i2cset, isaset: Written byte/word can be masked
543  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
544  Program mkpatch: Include i2c-amd756-s4882
545  Program pwmconfig: Handle new (well, back to old) pwm files names for
546                     Linux 2.6.10 and up
547  Program sensord: Do not scale load average (Aurelien Jarno)
548  Program sensors: Add lm63, lpc47b397 support
549                   Support DDR2 memory module EEPROMs (Rudolf Marek)
550                   Support only one location for the default configuration file
551                   Display the default configuration file location in --help
552                   Simplify the configuration file opening code
553  Program sensors-detect: Improve LM63 detection
554                          Discard IBM Thinkpad detection code
555                          Add PCA9556, LPC47B397, ICH7 detection
556                          Fix W83792D detection, add W83791SD detection
557
558
5592.8.8 (20041007)
560  File doc/donations: Update
561  File doc/lm_sensors-FAQ.texi: Add 4.6.1
562                                Update 4.7
563  File doc/chips/gl518sm: Update "iterate" info
564  File doc/chips/it87: Discard outdated module parameters
565  File doc/chips/lm75: LM77 is not supported
566  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
567  File doc/chips/lm93: New
568  File doc/chips/w83l785ts: Improvements
569  File etc/sensors.conf.eg: Fix it87 lines order
570                            Update lm87 section
571  File kernel/include/sensors_vid.h: Support VRM 10.0
572  Library: Support 2.6 adm1025
573           Preliminary support for 2.6 lm87
574           Support 2.6 adm9240
575           Allow an alternative sysfs file name for chip features (2.6)
576           Fix lm83 critical limits (2.6)
577           Add lm93 support
578           Prevent some procfs errors from being silently ignored
579  Makefiles: Implement user_uninstall (Rudolf Marek)
580             Spoof LOGNAME and HOSTNAME when making html man pages
581  Module adm1025: Refine detection
582                  Update limit registers again (revert of 2.8.1)
583                  Init high limits if they read 0
584                  Fix conversions
585  Module lm75: Refine detection
586  Module lm78: Fix init
587  Module lm83: Default to kind lm83 if forced.
588               Fix temperature macros.
589  Module lm90: Add LM86, MAX6657 and MAX6658 support
590  Module lm93: New
591  Module mtp008: Fix the setting of limits on temp2
592  Module pca9540: Refine detection
593  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
594                  Support VID
595                  Fix fan_div file when fan count is less than 3
596                  Additional init and debug
597  Module smsc47m1: Fix pwm_enable being inverted
598  Module w83627hf: Add alternate VCORE/in0 calculation method
599                   Remove reset of chip by driver on initialization
600  Module w83781d: Fix default VRM for w83791d
601  Module w83l785ts: Implement read error handling (backport from 2.6)
602  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
603                    Wait for user input to continue (as opposed to 5 sec
604                    delay), can be skipped with -y
605                    Various cleanups and code refactoring
606                    Update manual pages
607  Program fancontrol.init: New (Dean Takemori)
608  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
609  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
610                           (Giuseppe Della Bianca)
611  Program mkdev.sh: Detect devfs and refuse to run
612                    Use mknod's mode instead of chmod
613  Program mkpatch: Include xeontemp and pc87360
614  Program sensors: Rework adm1025 support
615                   Display pc87365/pc87366 VID
616                   Improve smsc47m1 support
617                   Hide 2.6 adm1027 alarm_mask being missing
618                   Print VRM version for all supported chips
619  Program sensors-detect: Support LM93, LM77, LM63
620                          Support PC8739x Super-I/O family (no sensors)
621                          Fix PCA9540 support
622                          Refine ADM1025/ADM1025A detection
623                          Refine LM75 detection
624                          Ignore missing /proc/modules (Andras Bali)
625                          Script-wide Perl cleanups
626                          Support udev
627                          Support W83792D, LM96000
628
629
6302.8.7 (20040611)
631  File README.thinkpad: Update 24RF08 status
632  File doc/fan-divisors: More info on accuracy
633  File doc/lm_sensors-FAQ.texi: Update 4.27
634  File doc/chips/adm1031: New
635  File doc/chips/max1619: New
636  File doc/chips/pc87360-fan: Renamed to pc87360
637  File doc/chips/pc87360: Big update
638  File doc/chips/w83781d: Update AS99127F documentation
639  File etc/sensors.conf.eg: Add comments about BP6 voltages
640                            Add comment on Asus A7V8X-X VCore
641                            Misc fixes to lm80 section
642                            Update via686a section
643                            New lm99 section
644                            Add section for LM85-like chips
645                            Preliminary pc87366 section
646                            Add comment on GL520SM application modes
647                            Document beep_enable (Aurelien Jarno)
648                            Preliminary max1619 section
649                            Preliminary adm1030 and adm1031 sections
650  Library: Fix 2.6 VRM
651           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
652           Fully support the PC87360 family
653           Support the lm99
654           Add version and date strings
655           Support 2.6 max1619
656  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
657  Man page i2cdetect.8: document new command line flags
658  Man page i2cdump.8: More details on how i2cdump can write to a chip
659  Modules (all chip drivers): Rework memory allocation scheme.
660  Module adm1031: New (Alexandre d'Alton)
661  Module bmcsensors: Fix oops by creating thread for initialization
662  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
663  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
664          asb100.c, lm92.c: Use swab16
665  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
666  Module gl520sm: Less agressive initialization process
667                  Fix temp1 limits being unsettable in application
668                  Ensure that temp2 and in4 are not used at the same time
669  Module i2c-i801: Support 6300ESB and ICH6
670  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
671  Module i2c-sis645: Add support for SiS655
672  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
673  Module lm90: Support LM99 and LM89
674  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
675               Get rid of useless i2c_probe call
676  Module max1619: New (Alexey Fisher)
677  Module p4b_smbus: Add support for mobile versions of the 82801
678                    (Axel Thimm)
679  Module pc87360-fan: Renamed to pc87360
680  Module pc87360: Also support PC87365 and PC87366
681                  Add write support
682                  Correctly set the chip name depending on the type
683                  Add voltage and temperature support
684                  Fix fan speed computation
685                  Retrieve fans configuration from Super-I/O space
686                  Export pwm_enable (read-only)
687                  Honor pwm invert bits
688                  Clear fan alarms after we read them
689                  Do not read fan data when monitoring is disabled
690                  Do not include SENSORS_INSMOD stuff
691                  New module parameter: init
692                  Fan clock dividers change automatically
693                  Add thermistor dupport
694  Module smsc47m1: Lock on reads and writes
695                   Various PWM fixes
696  Module thmc50: Fix address range
697  Module via686a: Fix voltage roundings
698                  Simplify temperature conversions
699  Module w83781d: Drop PWM support for as99127f
700                  Invert AS99127F beep bits in driver rather than user-space
701  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
702  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
703  Program fancontrol.pl: New
704  Program i2cdetect: Adapt probing method to address
705                     Add -q and -r flags to force probing methods
706                     Allow probing range selection
707  Program isadump: Major improvements
708  Program isaset: New
709  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
710                   module
711                   Include i2c-nforce2
712  Program sensord: New --rrd-no-average parameter
713                   Syncronize time slots with rrd
714                   Fix W83781D temp3 alarm (Aurelien Jarno)
715                   Add ASB100 support (Andrew May)
716  Program sensors: Fully support the PC87360 family
717                   Fix lm80 temperature alarms
718                   Support the lm99
719                   Do not invert AS99127F beep bits anymore
720                   Fix W83781D temp3 alarm (Aurelien Jarno)
721                   Print library version string
722  Program sensors-detect: Rework Super I/O detection
723                          Support SiS655/SiS96x
724                          Support ADT7461 and ADT7467
725                          Better support for ADM1027, ADT7460 and ADT7463
726                          Explicitly support ADM1028
727                          Scan all logical devices of PC87365 and PC87366
728                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
729                          Detect eeproms with software write protect (not
730                          enabled by default)
731                          Support ALi 1563 (2.6 only)
732                          Drop LTC1710 support
733                          Use byte reads for probing on ranges 0x30-0x37 and
734                          0x50-0x5F
735                          Improve LM89 and LM99 support
736                          Support GeForce FX 5900 video cards
737                          Fix devfs misdetection (Aurelien Jarno)
738                          Detect 6300ESB, ICH6
739                          Fix double detection of ISA chips
740                          Support MAX1619
741                          Support PC87373 Super-I/O
742                          Fix unknown adapters appearing multiple times
743                          Refine MAX6650/MAX6651 detection
744
745
7462.8.6 (20040405)
747  File README.thinkpad: Update status
748  File doc/chips/pca9540: New
749  File doc/chips/pc87360-fan: New
750  File etc/sensors.conf.eg: Update pcf8591 default configuration
751  Library: Switch to new sysfs naming standard
752           Fix gcc 3.3 warnings (Philipp Thomas)
753           Support 2.6 ds1621 and pcf8591
754           Change pcf8591 magnitudes
755           Support pc87360-fan
756  Makefile: Install shared library 755
757  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
758  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
759  Modules ds1621, pcf8591: Check for capabilities before using them
760                           (Aurelien Jarno)
761  Modules pcf8574, pcf8591: Cleanups
762  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
763  Module adm1021: Better detection and initialization
764  Module pca9540: New driver for the Philips PCA9540
765  Module pc87360-fan: New driver for the National Semiconductor PC87360,
766                      PC87363 and PC87364 Super I/O chips
767  Module smsc47m1: Support the LPC47B27x
768  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
769  Program i2cdetect: Skip special addresses by default
770  Program sensord: Prevent null pointer dereference (Tim Toohey)
771  Program sensors: Print the degree symbol in the terminal's current locale
772                   (Aurelien Jarno)
773                   Update pcf8591 print to support 2.6 driver
774                   Support pc87360-fan
775  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
776                          Improved SiS chips support
777                          Add a white list of IBM systems
778                          Drop support of undetectable adapters
779                          Fix smart battery detection
780                          Add smart battery charger and manager detection
781                          Rework adm1021 and clones detection
782                          The PC87360, PC87363 and PC87364 Super I/O chips
783                          now have a (preliminary) driver
784                          Rework Super I/O detection
785                          Better support of devfs
786  Program sensors-detect-stat.pl: New
787
788
7892.8.5 (20040305)
790  File doc/chips/SUMMARY: Update
791  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
792  Makefiles hotplug and rrd: Remove -o and -g arguments to install
793  Module bmcsensors: Increase max SDRs to 100
794  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
795  Module i2c-amd756: Don't register driver to avoid driver conflicts.
796                     (Daniel Rune Jensen)
797  Module it87: Better temperature sensor types handling (Takeru Komoriya)
798               Fix reset=1 (Takeru Komoriya)
799  Module lm80: Code cleanups
800  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
801  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
802  Module w83627hf: Add w83637hf support
803                   Fix exported name
804                   Fix PWM in w83627thf
805                   Preserve other bits when forcing temp2/3 to comparator mode
806  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
807                  Remove asb100 support
808  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
809          Define driver ID if i2c-id.h doesn't have it yet.
810  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
811          Backport oops fix from Linux 2.6.
812  Modules (all chips): Get rid of useless headers
813  Program decode-edid.pl: Add sysfs support
814  Program sensors: Add w83637hf support
815                   Add support for Shuttle Ethernet EEPROMs
816                   Drop 2.6 subclient detection
817  Program sensors-detect: Add heuristics to the LM80 detection function
818                          Add support for W83L785R, improve W83L784R/AR
819                          Add GeForce FX 5600 as supported by rivatv
820                          More Super IO chips, better handling
821  Library: Update to match renames in fscher
822           Reverse temporary changes to w83l785ts mappings
823           Fix vt1211 and vt8231 uch_config not being writable
824           Add 2.6 lm80 support
825           Add w83637hf support
826           Remove in6 and temp1 from vt1211 and vt8231
827           Add support for Shuttle Ethernet EEPROMs
828           Remove unused as99127f features
829
830
8312.8.4 (20040207)
832  File doc/lm_sensors-FAQ.texi: Update 4.20.
833  File doc/chips/it87: Change hyst to low
834  File doc/chips/w83l785ts: New
835  File etc/sensors.conf.eg: Change it87 hyst to low
836                            Fix w83697hf supposed to have temp3
837                            Limits initialization for adm1025/ne1619
838                            Handle fscher voltage conversions
839                            Add Tyan Trinity S2495 KT400 setup (Eric
840                              Schumann)
841                            Fix fscher fan labels (Reinhard Nissl)
842  Library: Better 2.6 eeprom support
843           Change it87 hyst to low
844           Add 2.6 gl518sm, fscher support
845           Fix 2.6 negative voltages handling
846           Temporary fix to w83l785ts mappings
847  Module adm1025: Separate prefix for NE1619
848  Module adm1026: Remove use of temporary ID
849                  Define addresses as a range
850  Module bmcsensors: Fix reservations
851  Module fscher: Externalize voltage conversions
852  Module eeprom: Remove memtype
853  Module i2c-piix4: Fix resource release error
854                    Various cleanups
855  Program decode-vaio.pl: Add sysfs support
856  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
857                   Drop linux 2.2 support
858                   Add w83627hf
859  Program sensors: Do not show algorithm by default
860                   Cleanup temperature unit display code
861                   Cleanup label spacing code
862                   Fix output to UTF-8 terms (Marcel Sebek)
863                   Simplify gl518sm print
864                   Do not ignore errors in FSC chips prints
865                   Fix w83l785ts print
866                   Cleanup FSC chips prints
867  Program sensors-detect: Fix PATH issues
868                          Correctly point to the fscher driver
869
870
8712.8.3 (20040115)
872  File lm_sensors.spec: Update
873  Library: Add 2.6 eeprom, lm90 support
874           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
875  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
876  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
877  Module i2c-amd756: Fix byte writes
878  Module i2c-tsunami: Cleanups (Daniel Nilsson)
879  Module it87: Fix sg_tlx writes; fix sensor type reporting;
880               add 8712 Super I/O detection;
881               remove initialization of temp_type and fan_ctl;
882               remove init and temp_type module parameters
883  Module lm90: Handle hysteresis differently
884  Module smartbatt: Fix detection, magnitudes, temp
885  Module w83781d: Fix negative voltages
886  Module w83l785ts: New
887  Program eeprog: Make 8 bit mode the default
888  Program fancontrol: Improvements, fixes, support 2.6 kernels
889  Program mkpatch: Add lm75.h
890  Program pwmconfig: Improvements, fixes, support 2.6 kernels
891  Program sensors: Add ASB100 support
892  Program sensors-detect: Add 8712 Super I/O detection;
893                          add W83L785TS detection
894
895
8962.8.2 (20031211)
897  IMPORTANT: Limit initialization removed from all chip drivers!
898             If you didn't run 'sensors -s' in the past you may need to now!
899  File sensors.conf.eg: Change lm75 scaling back to 1;
900                        Add example for asb100
901  Library: Fix bmcsensors scaling, increase number of sensors;
902           Add w83627thf support; Advance version to 3.0.0;
903           Add hermes, ADM1032, ASB100 support;
904           Add it87 sensor type support;
905           Add sysfs support for kernel 2.6;
906           Fix memory leaks
907  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
908             Fail if no kernel .config file exists;
909             Don't build module dependencies for user and user_install
910  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
911          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
912          smsc47m1, thmc50, via686a, w83627hf, w83781d:
913          Remove initialization of limits by driver.
914  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
915  Modules (chip): Init cleanups
916  Module asb100: New
917  Module bmcsensors: Fix voltage scaling, voltage and fan limits
918  Modules ddcmon, eeprom: Add failure printks
919  Module fscher: New (Fujitsu-Siemens Hermes driver)
920  Module i2c-amd756: Fix AMD8111 support
921  Module i2c-amd8111: Fix byte writes
922  Module i2c-nforce2: Fix byte writes
923  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
924  Module i2c-sis630: Sync with 2.6.0-X driver version
925  Module i2c-viapro: Add support for Via 8237
926  Module it87: Add pwm and "smart guardian" support;
927               add it87 sensor type support
928  Module lm75: Fix negative voltages
929  Module lm90: Add ADM1032 support
930  Module w83781d: Fix 791d and 627hf detection
931  Module w83627hf: Add VID support
932  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
933  Program eeprog: New
934  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
935                                       support sysfs for i2c bus search
936  Program i2cdetect: Add -l option to list busses
937  Program i2cdump: Add 'c' mode for consective address reads
938  Program mkpatch: Cleanups
939  Program pwmconfig: Handle multiple fans controlled by a single pwm
940  Program sensord: Remove ddcmon support
941  Program sensors: Add ADM1032 support; add messages for sysfs
942  Program sensors-detect: Prefer Super I/O drivers;
943                          Fix W83627HF and W83791D detection; detect CSB6;
944                          Detect ADM1029, ADM1030, ADM1031;
945                          Detect W83637HF, W83697UF;
946                          Add it87 sensor type support; add sysfs support
947                          Reduce lm80 misdetects; remove PCFxxxx "detection"
948                          Detect VT8237 (KT600)
949                          Use VPD instead of DMI+ACPI for Thinkpad detection
950                          Suggest new asb100 driver instead of w83781d
951
952
9532.8.1 (20031005)
954  NOTE: Requires i2c-2.8.1 or newer!
955  File sensors.conf.eg: Improved adm1025 section
956                        Default temp labels for as99127f
957                        Improved lm83 section
958                        Better support for Asus A7V8X-X
959  File doc/chips/SUMMARY: Add SMSC manufacturer ID
960  File doc/chips/adm1025: Add decent documentation (almost new)
961  File doc/chips/lm83: Known motherboards list update, misc updates
962  Library: Change adm1025 names (hyst/over become low/high)
963           Swap adm1025 temp1 and temp2 to match the driver's order
964           Advance version to 2.0.1
965           Update lm83 support
966           Add support for lm90, xeontemp, max6650
967           Add separate messages for read and write errors
968           Add missing message for parse error
969  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
970  Modules (various): Fix includes for compilation on Alpha
971                     Use the new i2c_delay function instead of the various
972                     do_pause functions
973  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
974  Module i2c-nforce2: Cleanups
975  Module i2c-i810: Use readl/writel for portable access to PCI memory
976  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
977  Module i2c-savage4: Use readl/writel for portable access to PCI memory
978  Module i2c-sis630: Fix detection
979                     Add block data read/write support
980  Module i2c-sis645: Detection method change/bugfix
981  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
982  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
983  Module adm1025: Major driver update
984                  Add support for Philips NE1619
985                  Simplify the driver a lot (unified voltages, unified
986                  temperatures and much more)
987                  Fix default voltage limits
988                  Change default temperature limits
989                  Swap remote and local temperatures to match the internal
990                  registers order (make the code unification possible)
991                  Export remote diode fault through alarms
992  Module ddcmon: Major update
993                 Add half a dozen new features
994                 Add checksum parameter (same as for the eeprom module)
995                 Fix monitor limits
996  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
997  Module lm78: Fix a fan_div/fan_min bug
998  Module lm83: Add t_crit and alarms support
999  Module lm90: New
1000  Module max6650: New
1001  Module saa1064: New
1002  Module smsc47m1: Add support for 47M142
1003  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1004                   enhance w83627thf support
1005  Module w83781d: Enhance chip detection; clean up error returns;
1006                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1007  Module xeontemp: New
1008  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
1009                           Mark Rambus as unsupported
1010  Program decode-edid.pl: New
1011                          Interfaces between our eeprom module and
1012                          parse-edid from the read-edid project
1013  Program p4b_smbus: Fix SMP compilation
1014  Program sensord: Add support for IT87 (Mike Black)
1015                   Change ADM1025 support to match the changes made to
1016                   the library
1017  Program sensors: Rewrite and enhance EEPROM support
1018                   Change LM83 and ADM1025 support to match the changes
1019                   made to the library
1020                   Add DRDRAM support to print_eeprom
1021                   Exit(1) on /proc write failure (Malte Starostik)
1022                   Add LM90, MAX6650 support
1023  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1024                          Add support for LM82, LM86, LM89
1025                          Improved W83781D family detection
1026                          Add support for AS19927F rev.2, ASB100 Bach
1027                          Add support for Asus Mozart-2 (3 types)
1028                          Add support for NE1619
1029                          Add support for FSC Hermes
1030                          Make sure /sbin is in the user's path
1031                          Fix EEPROM detection
1032                          Automatic module.conf and /dev/i2c* detection
1033                          Improve LM82 and LM83 detection
1034                          Handle "to-be-written" cleanly
1035                          Add detection for 47M14x Super I/O
1036                          Handle the one-address-many-chips-same-driver
1037                          case
1038
1039
10402.8.0 (20030714)
1041  NOTE: Requires i2c-2.8.0 or newer!!!
1042  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1043                  2.4.13 or later required for mkpatch.
1044  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1045                  i2c package
1046  File doc/chips/fscscy: Add watchdog documentation
1047  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
1048  File sensors.h: Now automatically generated
1049  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1050           add adm1026, lm83, lm85, w83791d support;
1051           Advance version to 2.0.0
1052  Makefiles: Generate warnings if new library won't be found by ld.so;
1053             Modules now install in kernel/drivers/i2c/[busses,chips];
1054             Ensure that headers in /usr/local/include are used first;
1055             Don't use /usr/include headers for modules;
1056             Handle multiple UTS_RELEASE definitions in linux/version.h;
1057             Automatically generate kernel/include/sensors.h;
1058             Remove old gzipped modules; remove old misc directory if empty;
1059             Remove pre-2.4 installation method;
1060             -Wall now the default;
1061             Add new targets user, user_install, and help;
1062             Run depmod after module installation
1063  Modules (all): Cleanups including
1064                - Add #include <i2c-proc.h>
1065                - C99 initializers
1066                - Remove #ifdef MODULE
1067                - Remove #ifndef THIS_MODULE
1068                - Remove #ifndef MODULE_LICENSE
1069                - Remove other 2.1/2.2 #ifdefs
1070                - Remove #include "sensors.h", copy SYSCTL defs to module
1071                - Remove excess #includes
1072                - Remove argument in i2c_register_entry()
1073                - Remove dummy xxx_command() definition
1074                - Remove EXPORT_NO_SYMBOLS
1075                - Remove init_MUTEX #define
1076                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1077                  no longer adjust their own refcounts
1078                - Use module_init() and module_exit()
1079                - Update to new i2c_driver struct definition
1080  Modules (bus PCI): Convert to PCI-module-style initialization
1081  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1082  Module adm1021: Set alarm on failed reads and report old value;
1083                  merge changes from kernel 2.5.54
1084  Module adm1026: New
1085  Module bmcsensors: Fix compile when DEBUG=1
1086  Modules ddcmon, eeprom: Use i2c block reads if possible;
1087                          better error handling
1088  Module ds1307: Add to Makefile
1089  Module gl520sm: Fix temperature over/hyst writes
1090  Module lm75: merge changes from kernel 2.5.54
1091  Module lm83: New
1092  Module lm85: New
1093  Module i2c-ali1535: Check for invalid transaction
1094  Module i2c-ali15x3: Check for invalid transaction
1095  Module i2c-amd756: merge changes from kernel 2.5.54;
1096                     check for invalid transaction
1097  Module i2c-amd8111: merge changes from kernel 2.5.54
1098  Module i2c-i801: Add support for 82801EB (ICH5)
1099  Module i2c-i810: Fix for some chips
1100  Module i2c-nforce2: New
1101  Module i2c-piix4: Check for invalid transaction
1102  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1103  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1104        north bridges; SiS962 and SiS963 south bridges
1105  Module i2c-viapro: Check for invalid transaction
1106  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1107          pwm and pwm enable support; update docs
1108  Module smbus-arp: Check adapter for HW or SW PEC support;
1109                    add reset option
1110  Module w83781d: Add support for w83791d
1111  Module w83627hf: New
1112  Program decode-dimms.pl: Recognize DDR and Rambus
1113  Program eeprom: Fix writes for small eeproms
1114  Program eeprom, eepromer: Use local i2c-dev.h for build
1115  Program fancontrol: New
1116  Program lm_sensors.init: Call sensors -s in start()
1117  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1118                   Add adm1026,lm85 support;
1119                   Remove sensors.c file; add sensors_compat.h;
1120                   Remove patches to i2c-core.c and drivers/char/mem.c;
1121                   Now works only for kernels 2.4.13 or later
1122  Program p4b_smbus: Fix 'make install';
1123                     Install in same place as other modules;
1124                     Clear correct bits in config word
1125  Program pwmconfig: New
1126  Program sensors: add adm1026, lm85, w83791d support
1127  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1128                          w83627hf, w83627thf, w83697hf);
1129                          Add support for SiS651, SiS961, SiS745, SiS746;
1130                          Support dmidecode 2.0 and later;
1131                          Fix "C" format error;
1132                          Add support for adm1026, 82801EB (ICH5), W83791D;
1133                          Add support for w83l785ts, nForce2;
1134                          Fix UTF-8 incompatibility;
1135                          Better support for lm75;
1136                          Add support for lm83
1137
11382.7.0 (20021208)
1139  NOTE: Requires i2c-2.7.0 or newer.
1140  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1141  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1142  File doc/busses/i2c-sis645: Add license
1143  File doc/chips/lm92: Add license, features
1144  File doc/chips/maxilife: Add license, parameters, features
1145  File doc/chips/smartbatt: Complete rewrite
1146  File doc/chips/vt8231: Add license, parameters
1147  File sensors.conf.eg: Add section for lm75; complete the lm78 section
1148  Library: Add support for MC1066; add multiple VRM version support for lm87;
1149           enhance adm1023 support; initial support for Sony Vaio eeprom;
1150           add support for bmcsensors; add hacks for additional dummy drivers
1151  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1152            add flags for x86_64 compiles
1153  Module adm1021: Add support for MC1066
1154  Module bmcsensors: New
1155  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1156                   kernel 2.5.43; fix 2.2 kernel compiles
1157  Module gl518sm: Iterate allowed only for rev 0x00
1158  Module i2c-amd756: Configure base address for nForce support;
1159                     check for uninitialized base address;
1160                     add support for amd8111 (SMBus 1.0)
1161  Module i2c-amd8111: New (SMBus 2.0)
1162  Module i2c-ipmb: New
1163  Module i2c-ipmi: New
1164  Module i2c-keywest: Sync with kernel 2.4.20
1165  Module i2c-sis630: Add support for SiS730
1166  Module i2c-sis645: Improve support for SiS645/961;
1167                     add support for SiS645DX/961 and SiS735;
1168                     fix 2.2 kernel compiles
1169  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1170  Module lm87: Add multiple VRM version support
1171  Module vt1211: Fix inx limits and alarms; fix in0
1172  Module vt8231: Fix inx limits and alarms; fix in0
1173  Module w83781d: Fix in0/in1 initialization
1174  Module smartbatt: New
1175  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1176  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1177                           stop decoding on checksum error
1178  Program dmidecode: Fix read bug; upgrade to version 1.8
1179  Program doc-insmod: Complete rewrite; fix author output
1180  Program doc-features: Complete rewrite; handle missing sysctl entries;
1181                        handle unknown prefix with suggestion
1182  Program lm_sensors.init: Remove spaces bug; add green/red output
1183  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1184  Program rrd: Add sanity limits to newly-created RRD.
1185  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1186  Program sensors: Add support for MC1066, Rambus Rimms;
1187                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1188                   initial support for Sony Vaio eeprom
1189  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1190                          IPMI, AMD8111; add help if no sensors found;
1191                          add ACPI method for IBM system detection;
1192                          work with old Perl versions again;
1193                          initial support for Sony Vaio eeprom
1194
11952.6.5 (20020915)
1196  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1197  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1198  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1199  Module dmi_scan: new
1200  Module ds1621: Fix enable/disable
1201  Module eeprom: Do not corrupt 24RF08's when checksum=1
1202  Module i2c-i801: Check for uninitialized base address;
1203                   enable if not enabled
1204  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1205  Module i2c-sis630: new
1206  Module i2c-sis645: new
1207  Module lm92: Fix in-kernel initialization
1208  Module via686a: Remove VT8231 support
1209  Module vt8231: new
1210  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1211  Program dmidecode: new
1212  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1213  Program mkpatch: Add Config.in entries for, lm92,
1214                   pcf8574, pcf8591, smsc47m1, vt1211;
1215                   add dmi_scan
1216  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1217  Program lm_sensors.init: fix stop()
1218  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1219                   add support for logging loadavg in RRD;
1220                   fix down-converting raw labels for RRD;
1221                   update chip support, still behind sensors
1222  Program sensors: Add /usr/local/etc to config file path;
1223                   fix -c and -u flags; add vt8231
1224  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1225                          refuse to run on IBM systems;
1226                          fix sysconfig module numbering;
1227                          change quick write to not corrupt 24RF08's
1228
12292.6.4 (20020719)
1230  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1231  File doc/vid: New
1232  File include/sensors_vid.h: New
1233  File sensors.conf.eg: Add vt1211, smsc47m1
1234  Library: Add multiple VRM version support for adm1025, w83781d;
1235           fix 'flex scanner jammed' on some systems;
1236           add vt1211, smsc47m1, lm92;
1237           fix access mode checking
1238  Makefiles: For 2.4+ kernels, modules now install in
1239             kernel/drivers/[i2c,sensors] , not misc/ , and
1240             'make install' removes old versions in misc/ .
1241             Use $CFLAGS and $CPPFLAGS if defined.
1242  Module adm1025: Add multiple VID version support
1243  Module ds1307: new
1244  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1245                     reliability improvements
1246  Module i2c-hydra: Flush posted writes
1247  Module i2c-i801: Add support for 82801DB (ICH4)
1248  Module i2c-i810: Flush posted writes
1249  Module i2c-savage4: new
1250  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1251  Module i2c-voodoo3: Flush posted writes
1252  Module ds1307: New
1253  Module lm92: New
1254  Module smbus-arp: new
1255  Module smsc47m1: new
1256  Module via686a: Add support for VT8231 sensors
1257  Module vt1211: new
1258  Module w83781d: Add multiple VID version support; fix temp alarms
1259  Program eeprom: new
1260  Program i2cdump: Add smbus block command specification, add PEC support
1261  Program lm_sensors.init: new
1262  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1263                   pcf8574, pcf8591, smsc47m1, vt1211
1264  Program p4b_smbus: Add support for ICH4
1265  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1266  Program sensord.init: Renamed, was prog/init/sensors
1267  Program sensord: Major update, now requires rrd source;
1268                   not compiled by default
1269  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1270                   (don't display algo. and adap.) option;
1271                   add vt1211, smsc47m1, lm92
1272  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1273                          add 82801DB, LM85; fix perl warnings;
1274                          generate /etc/sysconfig/lm_sensors for
1275                          lm_sensors.init script
1276
12772.6.3 (20020322)
1278  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1279  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1280  File doc/chips/it87: add more temp_type help
1281  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1282                        add adm1021 section; add lm87 AIN[1,2] template;
1283                        swap negative voltage limits for 782d,783s,627hf,
1284                        697hf,it87; add more it87 help; swap neg. voltage
1285                        limits for lm78(-j), lm79, w83781d, as99127f
1286  Library: Add PCF8591, W83697HF, ADM1023 support;
1287           fix w83* fan_min computes;
1288           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1289  Module adm1024: Add MODULE_LICENSE("GPL")
1290  Module bt869: Add s-video out and DVD resolution support
1291  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1292  Module fscscy: implement min/max for voltages and fans
1293  Module i2c-amd756: Add support for AMD768
1294  Module i2c-i810: Add support for 810E
1295  Module i2c-keywest: Big update, sync with kernel 2.4.18
1296  Module i2c-piix4: Check for uninitialized base address
1297  Module i2c-sis5595: Blacklist 645, 735
1298  Module i2c-viapro: Check for uninitialized base address
1299  Module gl518sm: Standardize /proc entries in0-3
1300  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1301               fan -> fan1; fix temp2 limit writes
1302  Module pcf8574: Add support for PCF8574A; /proc interface changed
1303  Module pcf8591: new
1304  Module sis5595: Blacklist 645, 735
1305  Module w83781d: Add W83697HF support; allow force_subclients parameter
1306                  for Tyan 2460
1307  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1308  Program decode-vaio.pl: new
1309  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1310                   add text output
1311  Program init/sensors: New SysV init script
1312  Program mkpatch.pl: Add support for fscscy, add more help entries
1313  Program p4b_smbus: new
1314  Program rrd: Install summ_week.cgi
1315  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1316                   clean up chassis intrusion prints
1317  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1318                          fix Via686a and it87 detection;
1319                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1320                          fix uninitialized values; it87 beats lm78
1321
13222.6.2 (20011118)
1323  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1324  Chip Modules (all): malloc.h -> slab.h
1325  Modules (all): Add MODULE_LICENSE("GPL")
1326  File doc/FAQ: More updates and additions
1327  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1328  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1329           update it87 alarm ID's.
1330  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1331  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1332  Module i2c-amd756: Improve busy handling/printk's
1333  Module i2c-i801: Add 82801CA/CAM support
1334  Module i2c-keywest: Sync with PPC people, it works now
1335  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1336  Module i2c-viapro: Add Via VT8233 support
1337  Module it87: Merge alarm_* /proc entries to alarms
1338  Module sis5595: Fix support for rev B0
1339  Module via686a: Make limit initializations reliable
1340  Module w83781d: Allow init=0 parameter to bypass initialization
1341  Program isadump: Add flat address space (PCI) support
1342  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1343                      fscpos, it87, maxilife, mtp008
1344  Program sensors: Fix w83781d temp precision
1345  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1346                          Fujitsu Poseidon and Scylla,
1347                          Intel 82443MX and 82801CA/CAM detection,
1348                          add ITE 8172G detection (driver in kernel 2.4.10)
1349
13502.6.1 (20010830)
1351  File BUGS: Updated
1352  File doc/FAQ: More updates and additions
1353  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1354  File sensors.conf.eg: Fix/enhance it87 section
1355  Library: ds1621 and it87 updates
1356  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1357  Module i2c-amd756: Add AMD 766 support
1358  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1359  Module i2c-piix4: Add Serverworks CSB5 support
1360  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1361  Module adm1025: Fixed temp2 min/max writes
1362  Module ds1621: Add 12-bit precision mode
1363  Module it87: Enable all alarms, add in8 support, add sensor type selection
1364  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1365                  remove support for module
1366  Module sis5595: Recognize unsupported chips and refuse to load
1367  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1368  Program eepromer: new
1369  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1370                      of sensors.c as a module in kernel
1371  Program sensors: it87 updates; adjust temp. precision for some chips
1372  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1373                          recognize unsupported SiS chips;
1374                          recognize AMD 766 and Serverworks CSB5.
1375
13762.6.0 (20010612)
1377  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1378        If your make fails because it can't find <linux/i2c-proc.h>, you
1379        forgot this step!!!
1380  File doc/FAQ: Many, many updates and additions
1381  File doc/busses/i2c-sis5595: new
1382  File doc/busses/i2c-tsunami: new
1383  File doc/chips/it87: new
1384  File doc/chips/via686a: Claim support for 686b.
1385  File README.thinkpad: new
1386  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1387                        Add lm87, adm9240, ds1780, lm81 templates;
1388                        Enhance help comments in file;
1389                        Add Tyan S2510 dual-MTP008 example;
1390                        Make separate sis5595 section.
1391  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1392  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1393  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1394           Add support for maxilife-nba and amd1024;
1395           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1396  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1397  Chip Modules (all): Change from sensors_* to i2c_* globals
1398                      for new i2c-proc.[ch]
1399  Makefiles: enhance to support Alpha architecture
1400  Module adm1021: Fix lm84 and gl523sm support
1401  Module adm1024: new
1402  Module i2c-i801: Chip detection cleanup
1403  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1404  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1405  Module i2c-tsunami: New
1406  Module i2c-via: Ensure i2c bus is tristated correctly.
1407  Module it87: new driver for IT8705, IT8712, Sis950 chips
1408  Module lm78: Recognize chipid=0x20
1409  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1410  Module mtp008: Fix temp initializations;
1411                 Save BIOS pin configuration of temps and fans;
1412                 Fix sensor type reads/writes and fan min writes;
1413                 Fix spurious invalid sensor type messages
1414  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1415                  used for patched kernel now.
1416                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1417  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1418                  Allow force_addr=0xaddr
1419  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1420  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1421                  reading changes; Add messages for subclient
1422                  registration failure
1423  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1424  Program i2cset: new
1425  Program isadump: fix for Alpha arch. compiles
1426  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1427                      Remove ltc1710; Fix i2c_sis5595 typo;
1428                      Support kernel 2.4.5 makefile change;
1429                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1430  Program sens_update_rrd: new
1431  Program sensord: Add -d (debug) and -p (pid-file) options
1432  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1433                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1434                   Change mtp008 temps from max/min to limit/hyst;
1435                   Add maxilife-nba, adm1024, it87 support.
1436  Program sensors-detect: Recognize lm78 with chipid=0x20;
1437                          Recognize SMSC Victory66 South Bridge;
1438                          Add devfs /dev/i2c/x support;
1439                          Add adm1024, it87xx support; Add thinkpad warning.
1440  Program tellerstats: new
1441
14422.5.5 (20010115)
1443  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1444        you have kernel 2.4.0-prerelease or greater.
1445  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1446  File doc/developers/proc: new
1447  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1448  Library: Add ds1621, mtp008 support
1449  Module adm1021: Add support for adm1021a / adm1023
1450  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1451  Module adm1025: Add support for remote temp; rename /proc entries to
1452                  in[0-5] and temp[1-2]; fix negative temp readings
1453  Module adm9240: Rename /proc entries to in[0-5]
1454  Module ddcmon: allow force and force_ddcmon parameters
1455  Module ds1621: new
1456  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1457  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1458  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1459  Module lm87: cleanup, update voltage calculations
1460  Module mtp008: new
1461  Module pcf8574: change update time to 5 seconds
1462  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1463  Module w83781d: fix beep setting via /proc
1464  Programs editticket, readticket: new
1465  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1466  Program mkpatch.pl: more fixes; now adds many more modules
1467  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1468                   add adm1025 temp2; report temp limits correctly as
1469                   min/max or limit/hysteresis; print message if no
1470                   sensors are found. Removed false errors from lm87 reads.
1471  Program sensors-detect: Add ds1621, mtp008 detection;
1472                          add ServerWorks detection
1473
14742.5.4 (20001012)
1475  Module i2c-viapro: Add support for Via 596B (0x3051)
1476  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1477  Program mkpatch.pl: fixed infinite loop
1478  Program sensors-detect: Detect Via 596B (0x3051)
1479
14802.5.3 (20001008)
1481  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1482  File useful_addresses.html: update
1483  Library: Add lm87 support
1484  Module pcf8574: new
1485  Module i2c-ali1535: new
1486  Module i2c-ali15x3: removed force #ifdef.
1487  Module i2c-i801: support Intel 82801BA (815E chipset)
1488  Module i2c-i801: add i2c block write support, fix smbus block bugs
1489                   (requires i2c 2.5.3 package)
1490  Module i2c-i810: support Intel 82815
1491  Module lm87: new
1492  Module sensors: Fix for kernel 2.4.0-test8
1493                  (remove copy_to_user_ret and put_user_ret)
1494  Module w83781d: limit fan divisors to 8 max. for as99127f
1495  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1496  Program i2cdump: Add smbus block read support
1497  Programs i2cdetect, i2cdump: Improve error reporting
1498  Program sensors: new switch -u (--unknown)
1499  Program sensors-detect: detect Intel 82801BA (815E chipset)
1500  Program sensors-detect: detect Intel 82815
1501  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1502  Program sensors-detect: detect National LM87
1503  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1504  Program sensors-detect: Improve error reporting
1505
15062.5.2 (20000709)
1507  File sensors.conf.eg: Fix lm80 in8 calculation
1508  Module w83781d: W83783S no longer crashes on unloading
1509  Program sensors-detect: more robustness in case of unknown i2c adapters
1510  Program sensors-detect, libsensors: fix eeprom size reporting
1511  Program sensord: more flexibility, support for alarm scanning etc.
1512  Program sensors: support for ignore setting on sensor alarms.
1513  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1514
15152.5.1 (20000618)
1516  Library: Add adm1025 support
1517  Module adm1025: new
1518  Module ddcmon: Fixed bus scan which could hang SMBus
1519  Module i2c-keywest: new
1520  Module maxilife: Add support for Maxilife '99 (NBA)
1521  Module via686a: Enable sensors if not enabled by BIOS
1522  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1523  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1524  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1525  Module w83781d: Fis as99127f fan speed (was 66% too high)
1526  Module w83781d: Improve beep input checking
1527  Program i2cdump: Add Winbond-style bank selection
1528  Program isadump: Add Winbond-style bank selection
1529  Program sensors: Add adm1025 support.
1530  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1531  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1532  File sensors.conf.eg: Add Maxilife '99 entries
1533  File sensors.conf.eg: Remove some as99127f entries.
1534    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1535          won't reinstall it) or else 'sensors -s' will fail.
1536
15372.5.0 (20000312)
1538  Dropped all kernel 2.0 and 2.1 compatibility
1539  Module i2c-i810: new
1540  Module ddcmon: new
1541  Module via686a: new
1542  Module i2c-amd756: fixed region request
1543  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1544  Module w83781d: Don't change pin settings at initialization;
1545                  also fix chip detection.
1546  Library: Support for ddcmon and via686a
1547  Program sensors-detect: Support for ddcmon and via686a
1548  Program sensors: Support for eeprom, ddcmon and via686a
1549
15502.4.5 (20000116)
1551  Introduced DESTDIR installation prefix
1552  Module lm80: fixes, temperature now read and set correctly
1553  Module i2c-voodoo3: driver enhancements
1554  Module w83781d: fixes, AS99127 works much better now
1555  Library: New ignore keyword in config file
1556  Programs: Support for new ignore keyword
1557  Program sensors-detect: Support for MGA detections
1558
15592.4.4 (19991201)
1560  Addition of the alpha release of AMD 756 SMBus host support.
1561  Many fixes and updates to the gl518sm driver
1562  Updates and fixes for device detection
1563
15642.4.0 (19990920)
1565  Too much to list.
1566  i2c and smbus parts are split off to a separate i2c package.
1567  New drivers and other stuff.
1568
15692.3.4 (19990616)
1570  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1571  All: Now compiles against kernel 2.0.x (again ;)
1572  Module gl518sm: some updates and refinements
1573
15742.3.3 (19990603)
1575  All: Now compiles against kernel 2.3.x (x >= 1)
1576  Module i2c-voodoo3: Timing issue fixes
1577  Module bt869: Seems to be functional and relatively well tested
1578  Many modules were modified to be more compatible with the new
1579   Mutex structure in the new experimental kernels.
1580
15812.3.2 (19990507)
1582  Module i2c-hydra: Now compiles on 2.0.x kernels
1583  Module i2c-lm75: Slightly better detection
1584  * New, but not compiled by default:
1585  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1586  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1587
15882.3.1 (19990501)
1589  All: Now compiles on PPC
1590  Module i2c-hydra: NEW
1591  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1592  Module w83781d: Removed deadlock (mutex was not initialized)
1593  Documentation: A few glitches removed
1594  Makefile: default module installation directory is now
1595            /lib/modules/current/extra/misc
1596  Program sensors-detect: PPC Hydra now detected
1597  Program sensors: Now prints complete GL518SM information
1598  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1599
16002.3.0 (19990422)
1601  All: Many, many changes and improvements
1602  All: Many small bugs and problems removed
1603  Modules: New insmod parameters
1604  Modules: Much improved chip detection
1605  Module maxilife: NEW
1606  Module adm1021: MAX1617A now also supported
1607  Module adm9240: DS1780 now also supported
1608  Module w83781d: W83782D and W83783S now also supported
1609  Program sensors-detect: NEW
1610  Library: All chips now supported
1611  Documentation: Very much improved
1612
16132.2.2 (199903??)
1614  Just some minor updates and bug fixes.
1615
16162.2.1 (19990218)
1617  All: Removed compile warnings
1618  Module i2c-dev: Small bug removed if DEBUG=1 was used
1619  Module sis5595: Now compiles for 2.0 kernels
1620  Module adm1021: Detection corrected
1621
16222.2.0 (19990216)
1623  All: Set copyrights to include 1999
1624  All: Small bugfixes
1625  I2C: Upgraded to newest archive of Simon Vogl
1626  Module i2c-dev: NEW
1627  Module i2c-ali15x3: NEW
1628  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1629     directories, and somewhat improved
1630  Module sis5595: NEW
1631  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1632  Library: Support for new chip drivers, several small bugs fixed
1633  Library manual pages: NEW
1634  Program i2cdetect: Moved to detect directory
1635  Program detect.pl: NEW
1636  Program doc-features: NEW
1637  Program sensors: Added man-page
1638  Document BUGS: Added cdrom bug and kernel i2c conflict
1639
16402.1.2 (19990116)
1641  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1642  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1643  Documentation in doc/kernel: NEW
1644
16452.1.1 (19990107)
1646  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1647                     and older
1648  Module gl518sm.o: Miscelaneous bugs and problems solved
1649  Program isadump: NEW
1650
16512.1.0 (19981230)
1652  Library: Completely NEW
1653  Program sensors: NEW
1654  Program grab_busses: NEW
1655  Program decode-dimms: More information
1656  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1657  Module w83781d.o: NEW
1658  Module lm80.o: NEW
1659  Module gl518sm.o: new procfile beep, several small updates
1660  Modules: Now use pin readings, no more scaling within the kernel (use the
1661           library instead)
1662
16632.0.2 (19981214)
1664  Module eeprom.o: NEW
1665  Program decode-dimms: NEW
1666  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1667           2.1.58
1668  Modules: Somewhat less verbose on transfers
1669  Module lm78.o now recognizes and handles lm78-j and lm79
1670
16712.0.1 (1998121?)
1672  Module gl518sm.o updates, to make it actually work
1673  Module lm75.o high/low-byte swapping write bug fixed
1674
16752.0.0 (19981209)
1676  Initial release
Note: See TracBrowser for help on using the browser.