root/lm-sensors/branches/lm-sensors-3.0.0/CHANGES @ 4815

Revision 4815, 82.5 KB (checked in by khali, 8 years ago)

Fix a memory leak when daemonizing.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
5  File BUGS: Delete
6  File i2c-dev.h: Support I2C block reads with specified length
7  All bus modules and documentation: Delete
8  All chip modules and documentation: Delete
9  Legacy hotplug modules and documentation: Delete
10  File doc/version-2: Delete, obsolete
11  File Add a dme1737 section
12                        Add a thmc50 section
13  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
14  File README.patches: Delete, obsolete
15  Library: Clean up pwm symbol names translation
16           Always build with sysfs support
17           Delete procfs and sysctl support (Linux 2.4)
18           Delete all remnants of algorithm names
19           Drop all the chip-specific support
20           Fix a memory leak on error
21           Speed up sensors_get_ignored() a bit
22           No longer export sensors_chip_name_has_wildcards()
23           Delete sensors_do_all_sets(), unused
24           Pass structures by reference
25           Drop support for dummy type
26           New function sensors_snprintf_chip_name()
27           Drop support for dashes in chip names
28           Add support for devices on SPI adapters
29  Makefile: Drop the package and version targets
30  Man pages: Drop "conforming to" sections
31  Man page sensors.conf.5: Update the chip statement section
32  Program config/ Delete, obsolete
33  Programs doc/*: Delete, obsolete
34  Program etc/sensors-conf-convert: New
35  Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
36  Program i2cdump: Use the new I2C block read function
37  Program isadump: Detect when address bit 7 is a busy flag
38                   Fix Super-I/O exit sequence for Winbond/Fintek chips
39  Program matorb/displayit: Delete, obsolete
40  Program Delete, obsolete
41  Program mkpatch: Delete
42  Program fancontrol: Use let for arithmetic evaluation
43                      No longer need awk and grep
44                      Limit calls to external programs (Linux 2.6 only)
45                      Check for configuration file validity
46                      Support optional min and max PWM values
47                      Better integration with init scripts
48                      Use linear control instead of quadratic
49  Program Delete, redundant
50  Program pwmconfig: Use smaller steps for low PWM values
51                     Support optional min and max PWM values
52  Program rrd: Support only hwmon class devices
53               Look for rrd in /usr/bin by default
54               Add missing shell declarations
55               Update URI
56  Program sensord: Syncronize the version with lm-sensors
57                   Drop all the chip-specific support
58                   Fix a memory leak when daemonizing
59  Program sensors: Drop all the chip-specific support
60                   Fix alignment of alarm for one-limit temperatures
61                   Drop option -U
62                   Fix a memory leak on error (with -u)
63                   New option --bus-list
64  Program sensors-detect: Stop Super-I/O probe after first family success
65                          Fix SMSC DME1737 detection
66                          Add /usr/sbin to the PATH (#2199)
67                          Add ATI SB700 detection
68                          Add Maxim MAX6680/MAX6681 detection
69                          Add IT8726F detection
70                          Fix IPMI support for 2.6 kernels
71                          Add detection for non-standard SMSC Super-I/Os
72                          No longer depend on i2cdetect
73                          Add SMSC SCH5317 detection
74                          Drop detection of most non-sensors I2C chips
75                          Fix ADM1022 detection
76                          Add detection of many SMSC Super-I/O chips
77                          Add Fintek F71806FG and F71862FG detection
78                          Add Winbond W83L786NR/NG/R/G detection
79                          Add Winbond W83L771W/G detection
80                          Add Intel Tolapai SMBus detection
832.10.3 (20070319)
84  Library: Do not skip i2c adapters with only a class device and no
85            physical device. This change is required to survive the
86            planned struct class_dev removal from future 2.6 kernels.
87           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
88           Recognize i2c-isa-based devices as such even after class_dev
89            is gone
90           Compile with -D_REENTRANT
91           Fix support of Linux 2.6's max6650 driver
92           Fix max1619 support
93  Man page i2cdetect.8: Scanning range can be restricted
94  Module bmcsensors: Fix debugging messages
95  Module i2c-ali1563: Improve the status messages (2.6 backport)
96                      Fix device initialization (2.6 backport)
97  Module i2c-amd8111: Cleanups (2.6 backport)
98                      Fix initialization race (2.6 backport)
99  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
100  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
101  Module i2c-viapro: Add CX700 support (2.6 backport)
102  Module smsc47m1: Add SMSC LPC47M292 support
103                   Get rid of a useless semaphore (2.6 backport)
104  Programs i2cdetect, i2cdump, isadump: Flush output in real time
105  Program i2cdump: Cleaner output in SMBus block read mode
106  Program Fix pwmN_enable access (#2190)
107  Program sensors: Add smsc47m2 support (fans)
108                   Fix -A option (hide adapter name) on error
109  Program sensors-detect: Only probe relevant I2C addresses
110                          Drop ARP-capable device detection
111                          Add Maxim MAX6655/MAX6656 detection
112                           (Olexiy Avramchenko)
113                          Add Maxim MAX1668, MAX1805, MAX1989 detection
114                          Add VIA CX700 detection
115                          Drop legacy W83627HF ISA detection
116                          Don't bufferize stdout during probes
117                          Speed up the LM75 and LM77 detection
118                          Clean up the EEPROM detection
119                          Add Dallas DS75 detection
120                          Add SMSC LPC47M292 detection
121                          Add nVidia MCP61 and MCP65 detection
122                          Fix ADM1028 detection
123                          Add Nat. Semi. PC8347L Super-I/O detection
124                          Add SMSC SCH5504 Super-I/O detection (no sensors)
125                          Make the LM78 and W83781D detection safer
1282.10.2 (20070115)
129  RPM: Obsolete, removed
130  File doc/fan-divisors: Update
131  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
132  Library: Add support for the pc87247 driver (fans only)
133           Probe for busses before chips
134           Drop support for algorithm names
135           Add support for coretemp driver   
136           Major update/optimization of config-file scanner
137           Add config-file scanner regression tests
138           Add f71872f support
139           Add w83627dhg support (David Holl, #2157)
140           Get the i2c adapter names from
141           Add adm1029 support (Corentin Labbe)
142  Man page i2cdetect.8: Describe the output convention
143  Man page sensors.1: Update (option -c) and clean up
144  Module bmcsensors: Fix several warnings
145                     Fix fragile structure initialization
146  Module i2c-i801: Add ICH9 support
147  Module p4b_smbus: Add support for the ICH5
148  Module f71805f: Fix the device address decoding (2.6 backport)
149  Module icspll: Delete. It was useless and dangerous.
150  Program Remove spaces at end of lines
151  Program eepromer: Fix loads of warnings
152  Program i2cdetect: Make the output clearer
153  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
154  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
155                            without need of recompilation.
156  Programs dump/*: More robust handling of user inputs
157  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
158                                  Add support for non-i2c drivers
159  Program Disable debugging by default
160                         Add support for non-i2c drivers
161                         More tolerant config file parsing
162  Program sensord: Add pc87247 support (fans only)
163                   Add vt1211 support (#2150)
164                   Add w83627dhg support (David Holl, #2157)
165                   Add w83627ehf voltage support (Dave Platt)
166                   Add k8temp support (Dave Platt)
167  Program sensors: Add pc87247 support (fans only)
168                   Hide error on missing f71805f fan
169                   Handle option -c more efficiently
170                   Drop option -a (show algorithm names)
171                   Add f71872f support
172                   Add w83627dhg support (David Holl, #2157)
173                   Add adm1029 support (Corentin Labbe)
174                   Hide error on missing w83793 temp (Gong Jun)
175  Program sensors-detect: Add SMSC DME1737 detection
176                          Add Fintek F71882FG and EPoX EP1308 detection
177                          Add Intel Core thermal sensor detection
178                          Preallocate memory for I2C_FUNCS ioctl (#2138)
179                          Prevent misdetection of MAX6633/MAX6634/MAX6635
180                          Add Intel ICH9 detection
181                          Add Maxim MAX6648/MAX6692 detection
182                          Improve ADM1029 detection
183                          Add Andigilog chips detection
184                          Add Intel AMB FB-DIMM thermal sensor detection
185                          Add ATI SB600 detection
1882.10.1 (20060924)
189  File doc/developers/checklist renamed to dev/developers/release_checklist
190          with clarifications and updates for new SVN server.
191  File README.package: Delete.
192  File doc/busses/i2c-piix4: Update (2.6 backport)
193  File doc/developers/sysfs-interface: Update
194  File etc/ Add an smsc47m192 section
195                            Comment out all set statements
196                            Add an it8716 section
197                            Add a w83793 section
198                            Adjust the vt1211 section to match the new driver
199                             interface
200  Library: Fix device scan when no i2c support is present
201           Add support for W83627EHF voltage inputs and alarms
202           Add support for the smsc47m192 driver
203           Fix all memory leaks (yeah!)
204           Fix no sensors being reported as an error
205           Add support for the IT8716F and IT8718F chips
206           Add support for the W83793 chip (Yuan Mu)
207           Map the 2.6 adm1026's fan8 to fan0
208           Missing sysfs busses and classes are not errors
209           Change vt1211 temp3-7 magnitude from 1 to 3
210  Makefile: Don't grep autoconf.h on user-space targets
211            Fix depmod on non-running kernel version
212            Remove empty include directories on make user_uninstall
213  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
214  Module i2c-amd756-s4882: Improve static semaphore initialization
215                           (2.6 backport)
216  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
217                   Add ICH8 support (2.6 backport)
218                   Fix block transaction poll loops (2.6 backport)
219                   Remove PCI function check (2.6 backport)
220                   Cleanups (2.6 backport)
221  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
222  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
223                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
224                    Drop the fix_hstcfg parameter (2.6 backport)
225  Module i2c-viapro: Fix compilation with kernels < 2.4.21
226                     Add VT8237A and VT8251
227  Module lm83: Add LM82 support (2.6 backport)
228  Module vt1211: The VT1211 has no in6
229                 Rework the voltage and temperature conversions and the
230                  temperature input order to match the Linux 2.6 driver
231  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
232                  Add specific alarm and beep defines for the W83791D
233  Module w83792d: Fix PWM range (2.6 backport)
234  Program Decode depending on the memory type
235                           Decode the manufacturing date to an ISO8601 date
236                           Add the memory size computation and provide brief
237                            timing characteritics for SDRAM/DDR/DDR2 memory
238                           Add memory size computation for Rambus memory
239                           Various output cleanups and fixes
240  Program Add /usr/sbin or /usr/local/sbin to $PATH if needed
241  Program Detect and skip false positives
242  Program i2cdetect: Add a mode to print adapter functionalities
243  Program i2cdump: Restore bank after bank switching
244                   Add new mode W (read word on even register addresses)
245  Program mkpatch: Fix typo breaking f71805f
246                   Turn warnings on (-w), and fix them
247                   Print a usage message on missing command line parameters
248  Program pwmconfig: Use mktemp instead of tempfile
249  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
250                   Add smsc47m192 support
251                   Add abituguru support (Hans de Goede)
252                   Fix memory leak when printing an unknown chip
253                   Add it8716 and it8718 support
254                   Make each it87 fan and fan div optional
255                   Print missing w83791d values
256                   Add w83793 support (Yuan Mu)
257                   The adt7463 may not have in4 (#2119)
258                   Hide more vt1211 missing input errors
259                   Clearer error messages when no sensors found
260  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
261                          Add ATI IXP200/300/400 SMBus detection
262                          Prevent warning on 64-bit PCI addresses
263                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
264                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
265                           F75384S/M, F75387SG/RG and F81218D detection
266                          Add Winbond W83793R/G and W83627DHG detection
267                          Handle the W83791D driver difference between kernels
268                          Add nForce4 MCP04, MCP51 and MCP55 detection
269                          Add AMD Geode devices detection
270                          Add ITE IT8716F and IT8718F detection
271                          Add NatSemi/Winbond PC87427 detection
272                          Get driver information for busy addresses from
273                           sysfs (2.6 only)
274                          Drop the ISA IT87xxF detection
275                          Check i2c adapter functionalities before probing
276                          Add Intel ICH8 SMBus detection
277                          Add AMD K8 thermal sensors detection
278                          Simplify detection of SiS5595, VIA686 and VT8231
279                          Add Analog Devices ADM1033, ADM1034, ADT7462,
280                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
281                          Check for root user at startup
282                          Attempt to be slightly more user-friendly
283                          Add VT8237A and VT8251
284                          Remove detection of nVidia graphics adapters
285                          Use sysfs for PCI device enumeration
286                          Add generic PCI SMBus adapter detection
287                          Add generic Super-I/O logical device detection
288                          Add SMSC LPC47M172/182 detection
2912.10.0 (20060214)
292  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
293  File doc/busses/i2c-viapro: Update (2.6 backport)
294  File doc/chips/via686a: Update (2.6 backport)
295  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
296  File etc/ Do not set vrm by default
297  File i2c-dev.h: Fix union i2c_smbus_data definition
298                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
299                  Add missing parentheses around macros
300                  Drop I2C_FUNC_SMBUS_EMUL
301                  Drop I2C_FUNC_SMBUS_*_PEC
302                  Drop I2C_SMBUS_*_PEC
303  File sensors_vid.h: Drop default VRM
304  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
305           This is intentional.  Use if you still
306           need your memory SPD data.
307  Library: Big update to use libsysfs.  More TODO though.
308           Fix bus matching code for Linux 2.6 (Karsten Petersen)
309           Add f71805f, w83687thf support
310           Add platform drivers support
311           Fix sysctl warnings on x86_64
312           Restore vt1211 temp1
313  Makefile: Compile user-space programs with -Wundef
314  Module i2c-i801: Simplify the hardware PEC code
315                   Always set PEC mode explicitly before each transaction
316  Module i2c-i810: Documentation update, PCI IDs cleanup
317  Module i2c-keywest: Remove bus probing code (2.6 backport)
318  Module i2c-nforce2: Remove dead code (2.6 backport)
319                      Add the ID of the nForce4 MCP-04 (2.6 backport)
320  Module i2c-via: Remove dead code
321  Module i2c-viapro: Remove dead code
322                     Support I2C block read (2.6 backport)
323                     Code cleanups (2.6 backport)
324                     Improve debug register dump (2.6 backport)
325  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
326          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
327          i2c-sis645: Use pci_driver name to request I/O region; do
328                      not initialize i2c_adapter name to "unset" (2.6
329                      backport)
330  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
331                                              (2.6 backport)
332  Module adm9240: Cleanups (2.6 backport)
333  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
334  Module it87: Minor cleanups
335               Fix fan3_div setting bug (Anton V. Staaf)
336  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
337               Separate the register read function
338               Add PEC support for the ADM1032
339  Module via686a: Cleanups
340  Module w83627hf: Drop useless initialization step (2.6 backport)
341                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
342                   Fix alarms (Yuan Mu)
343                   Preserve fan min on fan div change (Yuan Mu)
344                   Properly handle W83627THF without VID (Yuan Mu)
345                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
346                   Add W83687THF support
347  Module w83781d: Drop W83697HF support (Grant Coady)
348  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
349                  Fix fan control mode (PWM/DC) reporting
350                  Fix fan div auto-adjust (Yuan Mu)
351                  Fix the subclient handling
352  Module w83l785ts: Minor cleanup (2.6 backport)
353  Module vt1211: Restore temp1
354  Modules vt1211, vt8231: Change default VRM to 9.1
355  Program Add lookup tables for manufacturer names
356                           Fix rounding error in PCxxxx speed computation
357                           Improve text output
358                           Improve speed under Linux 2.6
359                           Verify checksum before decoding anything
360                           Improve manufacturing location decoding
361                           Improve memory type detection
362                           Improve part number decoding
363  Program i2cdump: Drop now useless #ifdef tests
364                   Fix capability check for continuous byte mode
365  Program i2cget: New
366  Program i2cset: Add PEC support
367                  Fix argc check
368  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
369                                       Print the correct bus type if bus
370                                       functionality can be queried
371  Program isadump: Display the real addresses in flat mode
372  Program Silently skip already existing nodes
373  Program mkpatch: Include f71805f
374  Program sensord: Do not log algorithm names
375                   Drop EEPROM support (Aurelien Jarno)
376                   Add W83627EHF, F71805F/FG support
377                   Fix PC87365/PC87366 alarms
378  Program sensors: Drop free_the_label
379                   Fix compilation with uclibc (no iconv)
380                   Add f71805f, w83687thf support
381  Program sensors-detect: Drop algorithm names
382                          Do not rely on i2cdetect -l printing algo names
383                          Simplify adapter name matching mechanism
384                          New address for ADM1032, ADT7461
385                          Improve ADT7467, ADT7468 support
386                          Fix MAX6659 reported driver
387                          Add Fintek F71805F detection
388                          Add Analog Devices ADT7476 detection
389                          Add Intel 82845G detection
390                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
391                          Fix udev detection in some corner case
392                          Improve DS1621 detection
393                          Always prefer ISA access over SMBus access
3962.9.2 (20050906)
397  File doc/chips/*: Big update (2.6 backport)
398  Library: Drop ds1780-specific code (now use adm9240)
399           Fix memory leak in sensors_get_label()
400           Support /sys/class/hwmon (Linux 2.6.14+)
401           Limit stack usage in sensors_read_proc_chips()
402  Makefile: Detect 2.6+ kernels and check targets
403  Man page isaset.8: Fix typos
404  Module adm1031: Fix broken kfree() calls
405  Module i2c-ali1563: New (2.6 backport by Winbond)
406  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
407  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
408          w83627hf.c: Tag find function __init
409  Module lm93: Fix memory leak
410  Module smsc47m1: Fix PWM enable polarity on read
411  Modules w83627hf, w83781d: Allow setting fan divisor to 128
412  Program Support Linux 2.6 (Burkart Lingner)
413                           Added DDR/DDR2 frequency reporting in convenient
414                           form of DDRxxx PCyyyy
415  Program i2cdump: Properly handle short i2c block reads
416  Program Fix compile errors
417  Program mkpatch: Include i2c-ali1563
418                   Include w83792d
419  Program pwmconfig: Fix unsafe temporary file use
420  Program rrd: Support 2.6 kernels
421  Program sensord: Add support for w83637hf
422                   Support pc87360 (Henrik Brix Andersen)
423  Program sensors: Support the VAIO "VGN" prefix for eeprom
424  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
425                          Advertise the w83792d driver
426                          Improve IT8705F and IT8712F detection
427                          Merge LM82 and LM83 detection
428                          Add W83687THF detection
4312.9.1 (20050412)
432  File doc/busses/i2c-nforce2: Update
433  File doc/chips/it87: Update
434  File doc/chips/lm90: Update for adt7461
435  File doc/chips/mic74: New
436  File etc/ New sections for lm92 and w83792d
437  Library: Add support for 2.6 fscpos driver (Stefan Ott)
438           Fix sis5595 in4 (Aurelien Jarno)
439           Add support for 2.6 gl520sm driver (Maarten Deprez)
440           Add support for 2.6 bmcsensors driver (Yani Ioannou)
441           Add support for w83792d (Chunhao Huang/Winbond)
442           Add support for 2.6 adt7461 (James Chapman)
443           Add support for 2.6 lm92
444           Add support for 2.6 vt1211
445           Add preliminary support for 2.6 w83627ehf
446  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
447            Use -fno-strict-aliasing on all architectures
448  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
449  Module bmcsensors: Fix compile error
450                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
451  Module ds1621: Fix detection (Aurelien Jarno)
452  Module eeprom: Discard SPD-centric checksum module parameter
453                 Cleanup detection function (backport from Linux 2.6)
454  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
455  Module i2c-i801: Temporarily disable broken I2C block read
456  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
457                   Gelato)
458  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
459  Module i2c-viapro: Prevent repeated resets
460  Module it87: Improve Super-I/O detection
461               Limit I2C address range
462               Support VID on the IT8712F
463  Module lm75: Only initialize CMP/INT bit
464  Module lm78: Fix bug with setting negative temperature limits
465  Module lm85: Properly differentiate between ADM1027 and ADT7463
466               Add EMC6D102 support
467  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
468               Add limited ADT7461 support
469  Module lm93: Fix IN10 (+5V) scaling
470  Module mic74: New
471  Module w83627hf: Support secondary Super-I/O address
472                   Enable temp2 and temp3 if they are disabled
473  Module w83781d: Revert AS99127F temp2 and temp3 computation change
474                  Skip final initialization step for AS99127F chips
475  Module w83792d: New (Chunhao Huang/Winbond)
476  Program ddcmon: New; user-space replacement for the ddcmon driver
477  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
478  Program isadump: Handle Super-I/O keys
479  Program lm_sensors.init: Cleanups (Axel Thimm)
480  Program Add basic command-line interface
481  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
482  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
483                     Don't complain about read-only enable files (lm85)
484                     Fix handling of alternate config file name
485  Program sensord: Fix erroneous error message (Aurelien Jarno)
486                   Support sis5595 in4 (Aurelien Jarno)
487                   Support w83627thf
488                   Support the separate it8712 prefix (Aurelien Jarno)
489  Program sensors: Display sis5595 in4 (Aurelien Jarno)
490                   No errors on missing pc87360 fans
491                   Add gl520sm support (Maarten Deprez)
492                   Improve vt1211 error/ignore handling (Michael Carland)
493                   Support w83792d, w83627ehf
494  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
495                          Improve IT8705F and IT8712F detection
496                          Improve udev detection
497                          Fix DS1621 detection
498                          Add W83627EHF detection
499                          Add ATI SMBus detection
500                          Add VT1211 alias detection
501                          Warn if chip modules not found
502                          Add i2c-ipmi to list if bmcsensors is on it
503                          Add PC87591 detection
504                          Search for correct udev db file name
505                          Add nForce3 250Gb and nForce4 detection
5082.9.0 (20041228)
509  NOTE: Requires i2c-2.9.0 or newer!
510  File README.thinkpad: Update
511  File doc/chips/it87: Cleanups
512  File doc/chips/lm63: New
513  File etc/ Set via686a voltage limits
514  File kernel/chips/ Resync module list with mkpatch
515  File kernel/include/sensors_compat.h: Define __devexit_p if missing
516                                        (kernels 2.4.16 and older)
517  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
518                             and dec_use removed in release 2.8.0
519  Modules (all chip drivers): Remove owner from i2c_driver; pass
520                              controlling_mod to i2c_register_entry() again
521  Module bmcsensors: Support function 1/x
522  Module i2c-amd756: Display the real bus name
523  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
524  Module i2c-i801: Support i2c block read (ICH5 and higher)
525                   Add PEC support for ICH6
526                   Add support for ICH7
527  Module i2c-ipmb: Remove from build since it doesn't work
528  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
529  Module icspll: Fix compilation
530  Module lm63: New driver for the National Semiconductor LM63
531  Module lm83: Use signed types for temperatures
532               Check limits on register writes
533  Module lm87: Round voltages properly
534               Retry on read errors (David Knierim)
535               Less agressive init (no reset)
536  Module lm90: Use signed types for temperatures
537               Check limits on register writes
538  Module lm93: Added module parameter for VID pin input thresholds.
539               Fix typo in dynamic VID alarms
540               Adds a couple log messages for failed transactions (David
541               Knierim)
542               Fix compilation breaking C99-ism (Axel Thimm)
543               Fix block read retries
544  Module pc87360: Support secondary Super-I/O address
545  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
546  Library: Add lm63 support
547           Add lpc47b397 support
548  Programs *.init: Rename lockfile to match file name
549  Programs i2cset, isaset: Written byte/word can be masked
550  Program Find eeproms on non-0 i2c bus too
551  Program mkpatch: Include i2c-amd756-s4882
552  Program pwmconfig: Handle new (well, back to old) pwm files names for
553                     Linux 2.6.10 and up
554  Program sensord: Do not scale load average (Aurelien Jarno)
555  Program sensors: Add lm63, lpc47b397 support
556                   Support DDR2 memory module EEPROMs (Rudolf Marek)
557                   Support only one location for the default configuration file
558                   Display the default configuration file location in --help
559                   Simplify the configuration file opening code
560  Program sensors-detect: Improve LM63 detection
561                          Discard IBM Thinkpad detection code
562                          Add PCA9556, LPC47B397, ICH7 detection
563                          Fix W83792D detection, add W83791SD detection
5662.8.8 (20041007)
567  File doc/donations: Update
568  File doc/lm_sensors-FAQ.texi: Add 4.6.1
569                                Update 4.7
570  File doc/chips/gl518sm: Update "iterate" info
571  File doc/chips/it87: Discard outdated module parameters
572  File doc/chips/lm75: LM77 is not supported
573  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
574  File doc/chips/lm93: New
575  File doc/chips/w83l785ts: Improvements
576  File etc/ Fix it87 lines order
577                            Update lm87 section
578  File kernel/include/sensors_vid.h: Support VRM 10.0
579  Library: Support 2.6 adm1025
580           Preliminary support for 2.6 lm87
581           Support 2.6 adm9240
582           Allow an alternative sysfs file name for chip features (2.6)
583           Fix lm83 critical limits (2.6)
584           Add lm93 support
585           Prevent some procfs errors from being silently ignored
586  Makefiles: Implement user_uninstall (Rudolf Marek)
587             Spoof LOGNAME and HOSTNAME when making html man pages
588  Module adm1025: Refine detection
589                  Update limit registers again (revert of 2.8.1)
590                  Init high limits if they read 0
591                  Fix conversions
592  Module lm75: Refine detection
593  Module lm78: Fix init
594  Module lm83: Default to kind lm83 if forced.
595               Fix temperature macros.
596  Module lm90: Add LM86, MAX6657 and MAX6658 support
597  Module lm93: New
598  Module mtp008: Fix the setting of limits on temp2
599  Module pca9540: Refine detection
600  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
601                  Support VID
602                  Fix fan_div file when fan count is less than 3
603                  Additional init and debug
604  Module smsc47m1: Fix pwm_enable being inverted
605  Module w83627hf: Add alternate VCORE/in0 calculation method
606                   Remove reset of chip by driver on initialization
607  Module w83781d: Fix default VRM for w83791d
608  Module w83l785ts: Implement read error handling (backport from 2.6)
609  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
610                    Wait for user input to continue (as opposed to 5 sec
611                    delay), can be skipped with -y
612                    Various cleanups and code refactoring
613                    Update manual pages
614  Program fancontrol.init: New (Dean Takemori)
615  Program Restore fans on many kinds of errors/interrupts
616  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
617                           (Giuseppe Della Bianca)
618  Program Detect devfs and refuse to run
619                    Use mknod's mode instead of chmod
620  Program mkpatch: Include xeontemp and pc87360
621  Program sensors: Rework adm1025 support
622                   Display pc87365/pc87366 VID
623                   Improve smsc47m1 support
624                   Hide 2.6 adm1027 alarm_mask being missing
625                   Print VRM version for all supported chips
626  Program sensors-detect: Support LM93, LM77, LM63
627                          Support PC8739x Super-I/O family (no sensors)
628                          Fix PCA9540 support
629                          Refine ADM1025/ADM1025A detection
630                          Refine LM75 detection
631                          Ignore missing /proc/modules (Andras Bali)
632                          Script-wide Perl cleanups
633                          Support udev
634                          Support W83792D, LM96000
6372.8.7 (20040611)
638  File README.thinkpad: Update 24RF08 status
639  File doc/fan-divisors: More info on accuracy
640  File doc/lm_sensors-FAQ.texi: Update 4.27
641  File doc/chips/adm1031: New
642  File doc/chips/max1619: New
643  File doc/chips/pc87360-fan: Renamed to pc87360
644  File doc/chips/pc87360: Big update
645  File doc/chips/w83781d: Update AS99127F documentation
646  File etc/ Add comments about BP6 voltages
647                            Add comment on Asus A7V8X-X VCore
648                            Misc fixes to lm80 section
649                            Update via686a section
650                            New lm99 section
651                            Add section for LM85-like chips
652                            Preliminary pc87366 section
653                            Add comment on GL520SM application modes
654                            Document beep_enable (Aurelien Jarno)
655                            Preliminary max1619 section
656                            Preliminary adm1030 and adm1031 sections
657  Library: Fix 2.6 VRM
658           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
659           Fully support the PC87360 family
660           Support the lm99
661           Add version and date strings
662           Support 2.6 max1619
663  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
664  Man page i2cdetect.8: document new command line flags
665  Man page i2cdump.8: More details on how i2cdump can write to a chip
666  Modules (all chip drivers): Rework memory allocation scheme.
667  Module adm1031: New (Alexandre d'Alton)
668  Module bmcsensors: Fix oops by creating thread for initialization
669  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
670  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
671          asb100.c, lm92.c: Use swab16
672  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
673  Module gl520sm: Less agressive initialization process
674                  Fix temp1 limits being unsettable in application
675                  Ensure that temp2 and in4 are not used at the same time
676  Module i2c-i801: Support 6300ESB and ICH6
677  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
678  Module i2c-sis645: Add support for SiS655
679  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
680  Module lm90: Support LM99 and LM89
681  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
682               Get rid of useless i2c_probe call
683  Module max1619: New (Alexey Fisher)
684  Module p4b_smbus: Add support for mobile versions of the 82801
685                    (Axel Thimm)
686  Module pc87360-fan: Renamed to pc87360
687  Module pc87360: Also support PC87365 and PC87366
688                  Add write support
689                  Correctly set the chip name depending on the type
690                  Add voltage and temperature support
691                  Fix fan speed computation
692                  Retrieve fans configuration from Super-I/O space
693                  Export pwm_enable (read-only)
694                  Honor pwm invert bits
695                  Clear fan alarms after we read them
696                  Do not read fan data when monitoring is disabled
697                  Do not include SENSORS_INSMOD stuff
698                  New module parameter: init
699                  Fan clock dividers change automatically
700                  Add thermistor dupport
701  Module smsc47m1: Lock on reads and writes
702                   Various PWM fixes
703  Module thmc50: Fix address range
704  Module via686a: Fix voltage roundings
705                  Simplify temperature conversions
706  Module w83781d: Drop PWM support for as99127f
707                  Invert AS99127F beep bits in driver rather than user-space
708  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
709  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
710  Program New
711  Program i2cdetect: Adapt probing method to address
712                     Add -q and -r flags to force probing methods
713                     Allow probing range selection
714  Program isadump: Major improvements
715  Program isaset: New
716  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
717                   module
718                   Include i2c-nforce2
719  Program sensord: New --rrd-no-average parameter
720                   Syncronize time slots with rrd
721                   Fix W83781D temp3 alarm (Aurelien Jarno)
722                   Add ASB100 support (Andrew May)
723  Program sensors: Fully support the PC87360 family
724                   Fix lm80 temperature alarms
725                   Support the lm99
726                   Do not invert AS99127F beep bits anymore
727                   Fix W83781D temp3 alarm (Aurelien Jarno)
728                   Print library version string
729  Program sensors-detect: Rework Super I/O detection
730                          Support SiS655/SiS96x
731                          Support ADT7461 and ADT7467
732                          Better support for ADM1027, ADT7460 and ADT7463
733                          Explicitly support ADM1028
734                          Scan all logical devices of PC87365 and PC87366
735                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
736                          Detect eeproms with software write protect (not
737                          enabled by default)
738                          Support ALi 1563 (2.6 only)
739                          Drop LTC1710 support
740                          Use byte reads for probing on ranges 0x30-0x37 and
741                          0x50-0x5F
742                          Improve LM89 and LM99 support
743                          Support GeForce FX 5900 video cards
744                          Fix devfs misdetection (Aurelien Jarno)
745                          Detect 6300ESB, ICH6
746                          Fix double detection of ISA chips
747                          Support MAX1619
748                          Support PC87373 Super-I/O
749                          Fix unknown adapters appearing multiple times
750                          Refine MAX6650/MAX6651 detection
7532.8.6 (20040405)
754  File README.thinkpad: Update status
755  File doc/chips/pca9540: New
756  File doc/chips/pc87360-fan: New
757  File etc/ Update pcf8591 default configuration
758  Library: Switch to new sysfs naming standard
759           Fix gcc 3.3 warnings (Philipp Thomas)
760           Support 2.6 ds1621 and pcf8591
761           Change pcf8591 magnitudes
762           Support pc87360-fan
763  Makefile: Install shared library 755
764  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
765  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
766  Modules ds1621, pcf8591: Check for capabilities before using them
767                           (Aurelien Jarno)
768  Modules pcf8574, pcf8591: Cleanups
769  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
770  Module adm1021: Better detection and initialization
771  Module pca9540: New driver for the Philips PCA9540
772  Module pc87360-fan: New driver for the National Semiconductor PC87360,
773                      PC87363 and PC87364 Super I/O chips
774  Module smsc47m1: Support the LPC47B27x
775  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
776  Program i2cdetect: Skip special addresses by default
777  Program sensord: Prevent null pointer dereference (Tim Toohey)
778  Program sensors: Print the degree symbol in the terminal's current locale
779                   (Aurelien Jarno)
780                   Update pcf8591 print to support 2.6 driver
781                   Support pc87360-fan
782  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
783                          Improved SiS chips support
784                          Add a white list of IBM systems
785                          Drop support of undetectable adapters
786                          Fix smart battery detection
787                          Add smart battery charger and manager detection
788                          Rework adm1021 and clones detection
789                          The PC87360, PC87363 and PC87364 Super I/O chips
790                          now have a (preliminary) driver
791                          Rework Super I/O detection
792                          Better support of devfs
793  Program New
7962.8.5 (20040305)
797  File doc/chips/SUMMARY: Update
798  File etc/ Epox 8K3A tweaks. (Kronos)
799  Makefiles hotplug and rrd: Remove -o and -g arguments to install
800  Module bmcsensors: Increase max SDRs to 100
801  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
802  Module i2c-amd756: Don't register driver to avoid driver conflicts.
803                     (Daniel Rune Jensen)
804  Module it87: Better temperature sensor types handling (Takeru Komoriya)
805               Fix reset=1 (Takeru Komoriya)
806  Module lm80: Code cleanups
807  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
808  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
809  Module w83627hf: Add w83637hf support
810                   Fix exported name
811                   Fix PWM in w83627thf
812                   Preserve other bits when forcing temp2/3 to comparator mode
813  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
814                  Remove asb100 support
815  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
816          Define driver ID if i2c-id.h doesn't have it yet.
817  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
818          Backport oops fix from Linux 2.6.
819  Modules (all chips): Get rid of useless headers
820  Program Add sysfs support
821  Program sensors: Add w83637hf support
822                   Add support for Shuttle Ethernet EEPROMs
823                   Drop 2.6 subclient detection
824  Program sensors-detect: Add heuristics to the LM80 detection function
825                          Add support for W83L785R, improve W83L784R/AR
826                          Add GeForce FX 5600 as supported by rivatv
827                          More Super IO chips, better handling
828  Library: Update to match renames in fscher
829           Reverse temporary changes to w83l785ts mappings
830           Fix vt1211 and vt8231 uch_config not being writable
831           Add 2.6 lm80 support
832           Add w83637hf support
833           Remove in6 and temp1 from vt1211 and vt8231
834           Add support for Shuttle Ethernet EEPROMs
835           Remove unused as99127f features
8382.8.4 (20040207)
839  File doc/lm_sensors-FAQ.texi: Update 4.20.
840  File doc/chips/it87: Change hyst to low
841  File doc/chips/w83l785ts: New
842  File etc/ Change it87 hyst to low
843                            Fix w83697hf supposed to have temp3
844                            Limits initialization for adm1025/ne1619
845                            Handle fscher voltage conversions
846                            Add Tyan Trinity S2495 KT400 setup (Eric
847                              Schumann)
848                            Fix fscher fan labels (Reinhard Nissl)
849  Library: Better 2.6 eeprom support
850           Change it87 hyst to low
851           Add 2.6 gl518sm, fscher support
852           Fix 2.6 negative voltages handling
853           Temporary fix to w83l785ts mappings
854  Module adm1025: Separate prefix for NE1619
855  Module adm1026: Remove use of temporary ID
856                  Define addresses as a range
857  Module bmcsensors: Fix reservations
858  Module fscher: Externalize voltage conversions
859  Module eeprom: Remove memtype
860  Module i2c-piix4: Fix resource release error
861                    Various cleanups
862  Program Add sysfs support
863  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
864                   Drop linux 2.2 support
865                   Add w83627hf
866  Program sensors: Do not show algorithm by default
867                   Cleanup temperature unit display code
868                   Cleanup label spacing code
869                   Fix output to UTF-8 terms (Marcel Sebek)
870                   Simplify gl518sm print
871                   Do not ignore errors in FSC chips prints
872                   Fix w83l785ts print
873                   Cleanup FSC chips prints
874  Program sensors-detect: Fix PATH issues
875                          Correctly point to the fscher driver
8782.8.3 (20040115)
879  File lm_sensors.spec: Update
880  Library: Add 2.6 eeprom, lm90 support
881           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
882  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
883  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
884  Module i2c-amd756: Fix byte writes
885  Module i2c-tsunami: Cleanups (Daniel Nilsson)
886  Module it87: Fix sg_tlx writes; fix sensor type reporting;
887               add 8712 Super I/O detection;
888               remove initialization of temp_type and fan_ctl;
889               remove init and temp_type module parameters
890  Module lm90: Handle hysteresis differently
891  Module smartbatt: Fix detection, magnitudes, temp
892  Module w83781d: Fix negative voltages
893  Module w83l785ts: New
894  Program eeprog: Make 8 bit mode the default
895  Program fancontrol: Improvements, fixes, support 2.6 kernels
896  Program mkpatch: Add lm75.h
897  Program pwmconfig: Improvements, fixes, support 2.6 kernels
898  Program sensors: Add ASB100 support
899  Program sensors-detect: Add 8712 Super I/O detection;
900                          add W83L785TS detection
9032.8.2 (20031211)
904  IMPORTANT: Limit initialization removed from all chip drivers!
905             If you didn't run 'sensors -s' in the past you may need to now!
906  File Change lm75 scaling back to 1;
907                        Add example for asb100
908  Library: Fix bmcsensors scaling, increase number of sensors;
909           Add w83627thf support; Advance version to 3.0.0;
910           Add hermes, ADM1032, ASB100 support;
911           Add it87 sensor type support;
912           Add sysfs support for kernel 2.6;
913           Fix memory leaks
914  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
915             Fail if no kernel .config file exists;
916             Don't build module dependencies for user and user_install
917  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
918          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
919          smsc47m1, thmc50, via686a, w83627hf, w83781d:
920          Remove initialization of limits by driver.
921  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
922  Modules (chip): Init cleanups
923  Module asb100: New
924  Module bmcsensors: Fix voltage scaling, voltage and fan limits
925  Modules ddcmon, eeprom: Add failure printks
926  Module fscher: New (Fujitsu-Siemens Hermes driver)
927  Module i2c-amd756: Fix AMD8111 support
928  Module i2c-amd8111: Fix byte writes
929  Module i2c-nforce2: Fix byte writes
930  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
931  Module i2c-sis630: Sync with 2.6.0-X driver version
932  Module i2c-viapro: Add support for Via 8237
933  Module it87: Add pwm and "smart guardian" support;
934               add it87 sensor type support
935  Module lm75: Fix negative voltages
936  Module lm90: Add ADM1032 support
937  Module w83781d: Fix 791d and 627hf detection
938  Module w83627hf: Add VID support
939  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
940  Program eeprog: New
941  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
942                                       support sysfs for i2c bus search
943  Program i2cdetect: Add -l option to list busses
944  Program i2cdump: Add 'c' mode for consective address reads
945  Program mkpatch: Cleanups
946  Program pwmconfig: Handle multiple fans controlled by a single pwm
947  Program sensord: Remove ddcmon support
948  Program sensors: Add ADM1032 support; add messages for sysfs
949  Program sensors-detect: Prefer Super I/O drivers;
950                          Fix W83627HF and W83791D detection; detect CSB6;
951                          Detect ADM1029, ADM1030, ADM1031;
952                          Detect W83637HF, W83697UF;
953                          Add it87 sensor type support; add sysfs support
954                          Reduce lm80 misdetects; remove PCFxxxx "detection"
955                          Detect VT8237 (KT600)
956                          Use VPD instead of DMI+ACPI for Thinkpad detection
957                          Suggest new asb100 driver instead of w83781d
9602.8.1 (20031005)
961  NOTE: Requires i2c-2.8.1 or newer!
962  File Improved adm1025 section
963                        Default temp labels for as99127f
964                        Improved lm83 section
965                        Better support for Asus A7V8X-X
966  File doc/chips/SUMMARY: Add SMSC manufacturer ID
967  File doc/chips/adm1025: Add decent documentation (almost new)
968  File doc/chips/lm83: Known motherboards list update, misc updates
969  Library: Change adm1025 names (hyst/over become low/high)
970           Swap adm1025 temp1 and temp2 to match the driver's order
971           Advance version to 2.0.1
972           Update lm83 support
973           Add support for lm90, xeontemp, max6650
974           Add separate messages for read and write errors
975           Add missing message for parse error
977  Modules (various): Fix includes for compilation on Alpha
978                     Use the new i2c_delay function instead of the various
979                     do_pause functions
980  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
981  Module i2c-nforce2: Cleanups
982  Module i2c-i810: Use readl/writel for portable access to PCI memory
983  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
984  Module i2c-savage4: Use readl/writel for portable access to PCI memory
985  Module i2c-sis630: Fix detection
986                     Add block data read/write support
987  Module i2c-sis645: Detection method change/bugfix
988  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
989  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
990  Module adm1025: Major driver update
991                  Add support for Philips NE1619
992                  Simplify the driver a lot (unified voltages, unified
993                  temperatures and much more)
994                  Fix default voltage limits
995                  Change default temperature limits
996                  Swap remote and local temperatures to match the internal
997                  registers order (make the code unification possible)
998                  Export remote diode fault through alarms
999  Module ddcmon: Major update
1000                 Add half a dozen new features
1001                 Add checksum parameter (same as for the eeprom module)
1002                 Fix monitor limits
1003  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
1004  Module lm78: Fix a fan_div/fan_min bug
1005  Module lm83: Add t_crit and alarms support
1006  Module lm90: New
1007  Module max6650: New
1008  Module saa1064: New
1009  Module smsc47m1: Add support for 47M142
1010  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1011                   enhance w83627thf support
1012  Module w83781d: Enhance chip detection; clean up error returns;
1013                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1014  Module xeontemp: New
1015  Program Add Direct Rambus (DRDRAM)
1016                           Mark Rambus as unsupported
1017  Program New
1018                          Interfaces between our eeprom module and
1019                          parse-edid from the read-edid project
1020  Program p4b_smbus: Fix SMP compilation
1021  Program sensord: Add support for IT87 (Mike Black)
1022                   Change ADM1025 support to match the changes made to
1023                   the library
1024  Program sensors: Rewrite and enhance EEPROM support
1025                   Change LM83 and ADM1025 support to match the changes
1026                   made to the library
1027                   Add DRDRAM support to print_eeprom
1028                   Exit(1) on /proc write failure (Malte Starostik)
1029                   Add LM90, MAX6650 support
1030  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1031                          Add support for LM82, LM86, LM89
1032                          Improved W83781D family detection
1033                          Add support for AS19927F rev.2, ASB100 Bach
1034                          Add support for Asus Mozart-2 (3 types)
1035                          Add support for NE1619
1036                          Add support for FSC Hermes
1037                          Make sure /sbin is in the user's path
1038                          Fix EEPROM detection
1039                          Automatic module.conf and /dev/i2c* detection
1040                          Improve LM82 and LM83 detection
1041                          Handle "to-be-written" cleanly
1042                          Add detection for 47M14x Super I/O
1043                          Handle the one-address-many-chips-same-driver
1044                          case
10472.8.0 (20030714)
1048  NOTE: Requires i2c-2.8.0 or newer!!!
1049  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1050                  2.4.13 or later required for mkpatch.
1051  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1052                  i2c package
1053  File doc/chips/fscscy: Add watchdog documentation
1054  File Fix vt1211/vt8231 thermistor calculations
1055  File sensors.h: Now automatically generated
1056  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1057           add adm1026, lm83, lm85, w83791d support;
1058           Advance version to 2.0.0
1059  Makefiles: Generate warnings if new library won't be found by;
1060             Modules now install in kernel/drivers/i2c/[busses,chips];
1061             Ensure that headers in /usr/local/include are used first;
1062             Don't use /usr/include headers for modules;
1063             Handle multiple UTS_RELEASE definitions in linux/version.h;
1064             Automatically generate kernel/include/sensors.h;
1065             Remove old gzipped modules; remove old misc directory if empty;
1066             Remove pre-2.4 installation method;
1067             -Wall now the default;
1068             Add new targets user, user_install, and help;
1069             Run depmod after module installation
1070  Modules (all): Cleanups including
1071                - Add #include <i2c-proc.h>
1072                - C99 initializers
1073                - Remove #ifdef MODULE
1074                - Remove #ifndef THIS_MODULE
1075                - Remove #ifndef MODULE_LICENSE
1076                - Remove other 2.1/2.2 #ifdefs
1077                - Remove #include "sensors.h", copy SYSCTL defs to module
1078                - Remove excess #includes
1079                - Remove argument in i2c_register_entry()
1080                - Remove dummy xxx_command() definition
1081                - Remove EXPORT_NO_SYMBOLS
1082                - Remove init_MUTEX #define
1083                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1084                  no longer adjust their own refcounts
1085                - Use module_init() and module_exit()
1086                - Update to new i2c_driver struct definition
1087  Modules (bus PCI): Convert to PCI-module-style initialization
1088  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1089  Module adm1021: Set alarm on failed reads and report old value;
1090                  merge changes from kernel 2.5.54
1091  Module adm1026: New
1092  Module bmcsensors: Fix compile when DEBUG=1
1093  Modules ddcmon, eeprom: Use i2c block reads if possible;
1094                          better error handling
1095  Module ds1307: Add to Makefile
1096  Module gl520sm: Fix temperature over/hyst writes
1097  Module lm75: merge changes from kernel 2.5.54
1098  Module lm83: New
1099  Module lm85: New
1100  Module i2c-ali1535: Check for invalid transaction
1101  Module i2c-ali15x3: Check for invalid transaction
1102  Module i2c-amd756: merge changes from kernel 2.5.54;
1103                     check for invalid transaction
1104  Module i2c-amd8111: merge changes from kernel 2.5.54
1105  Module i2c-i801: Add support for 82801EB (ICH5)
1106  Module i2c-i810: Fix for some chips
1107  Module i2c-nforce2: New
1108  Module i2c-piix4: Check for invalid transaction
1109  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1110  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1111        north bridges; SiS962 and SiS963 south bridges
1112  Module i2c-viapro: Check for invalid transaction
1113  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1114          pwm and pwm enable support; update docs
1115  Module smbus-arp: Check adapter for HW or SW PEC support;
1116                    add reset option
1117  Module w83781d: Add support for w83791d
1118  Module w83627hf: New
1119  Program Recognize DDR and Rambus
1120  Program eeprom: Fix writes for small eeproms
1121  Program eeprom, eepromer: Use local i2c-dev.h for build
1122  Program fancontrol: New
1123  Program lm_sensors.init: Call sensors -s in start()
1124  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1125                   Add adm1026,lm85 support;
1126                   Remove sensors.c file; add sensors_compat.h;
1127                   Remove patches to i2c-core.c and drivers/char/mem.c;
1128                   Now works only for kernels 2.4.13 or later
1129  Program p4b_smbus: Fix 'make install';
1130                     Install in same place as other modules;
1131                     Clear correct bits in config word
1132  Program pwmconfig: New
1133  Program sensors: add adm1026, lm85, w83791d support
1134  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1135                          w83627hf, w83627thf, w83697hf);
1136                          Add support for SiS651, SiS961, SiS745, SiS746;
1137                          Support dmidecode 2.0 and later;
1138                          Fix "C" format error;
1139                          Add support for adm1026, 82801EB (ICH5), W83791D;
1140                          Add support for w83l785ts, nForce2;
1141                          Fix UTF-8 incompatibility;
1142                          Better support for lm75;
1143                          Add support for lm83
11452.7.0 (20021208)
1146  NOTE: Requires i2c-2.7.0 or newer.
1147  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1148  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1149  File doc/busses/i2c-sis645: Add license
1150  File doc/chips/lm92: Add license, features
1151  File doc/chips/maxilife: Add license, parameters, features
1152  File doc/chips/smartbatt: Complete rewrite
1153  File doc/chips/vt8231: Add license, parameters
1154  File Add section for lm75; complete the lm78 section
1155  Library: Add support for MC1066; add multiple VRM version support for lm87;
1156           enhance adm1023 support; initial support for Sony Vaio eeprom;
1157           add support for bmcsensors; add hacks for additional dummy drivers
1158  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1159            add flags for x86_64 compiles
1160  Module adm1021: Add support for MC1066
1161  Module bmcsensors: New
1162  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1163                   kernel 2.5.43; fix 2.2 kernel compiles
1164  Module gl518sm: Iterate allowed only for rev 0x00
1165  Module i2c-amd756: Configure base address for nForce support;
1166                     check for uninitialized base address;
1167                     add support for amd8111 (SMBus 1.0)
1168  Module i2c-amd8111: New (SMBus 2.0)
1169  Module i2c-ipmb: New
1170  Module i2c-ipmi: New
1171  Module i2c-keywest: Sync with kernel 2.4.20
1172  Module i2c-sis630: Add support for SiS730
1173  Module i2c-sis645: Improve support for SiS645/961;
1174                     add support for SiS645DX/961 and SiS735;
1175                     fix 2.2 kernel compiles
1176  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1177  Module lm87: Add multiple VRM version support
1178  Module vt1211: Fix inx limits and alarms; fix in0
1179  Module vt8231: Fix inx limits and alarms; fix in0
1180  Module w83781d: Fix in0/in1 initialization
1181  Module smartbatt: New
1182  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1183  Program Code cleanup; valid HTML; better HTML output;
1184                           stop decoding on checksum error
1185  Program dmidecode: Fix read bug; upgrade to version 1.8
1186  Program doc-insmod: Complete rewrite; fix author output
1187  Program doc-features: Complete rewrite; handle missing sysctl entries;
1188                        handle unknown prefix with suggestion
1189  Program lm_sensors.init: Remove spaces bug; add green/red output
1190  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1191  Program rrd: Add sanity limits to newly-created RRD.
1192  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1193  Program sensors: Add support for MC1066, Rambus Rimms;
1194                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1195                   initial support for Sony Vaio eeprom
1196  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1197                          IPMI, AMD8111; add help if no sensors found;
1198                          add ACPI method for IBM system detection;
1199                          work with old Perl versions again;
1200                          initial support for Sony Vaio eeprom
12022.6.5 (20020915)
1203  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1204  File Fix temp[23] for as99127f; add vt8231
1205  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1206  Module dmi_scan: new
1207  Module ds1621: Fix enable/disable
1208  Module eeprom: Do not corrupt 24RF08's when checksum=1
1209  Module i2c-i801: Check for uninitialized base address;
1210                   enable if not enabled
1211  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1212  Module i2c-sis630: new
1213  Module i2c-sis645: new
1214  Module lm92: Fix in-kernel initialization
1215  Module via686a: Remove VT8231 support
1216  Module vt8231: new
1217  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1218  Program dmidecode: new
1219  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1220  Program mkpatch: Add entries for, lm92,
1221                   pcf8574, pcf8591, smsc47m1, vt1211;
1222                   add dmi_scan
1223  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1224  Program lm_sensors.init: fix stop()
1225  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1226                   add support for logging loadavg in RRD;
1227                   fix down-converting raw labels for RRD;
1228                   update chip support, still behind sensors
1229  Program sensors: Add /usr/local/etc to config file path;
1230                   fix -c and -u flags; add vt8231
1231  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1232                          refuse to run on IBM systems;
1233                          fix sysconfig module numbering;
1234                          change quick write to not corrupt 24RF08's
12362.6.4 (20020719)
1237  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1238  File doc/vid: New
1239  File include/sensors_vid.h: New
1240  File Add vt1211, smsc47m1
1241  Library: Add multiple VRM version support for adm1025, w83781d;
1242           fix 'flex scanner jammed' on some systems;
1243           add vt1211, smsc47m1, lm92;
1244           fix access mode checking
1245  Makefiles: For 2.4+ kernels, modules now install in
1246             kernel/drivers/[i2c,sensors] , not misc/ , and
1247             'make install' removes old versions in misc/ .
1248             Use $CFLAGS and $CPPFLAGS if defined.
1249  Module adm1025: Add multiple VID version support
1250  Module ds1307: new
1251  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1252                     reliability improvements
1253  Module i2c-hydra: Flush posted writes
1254  Module i2c-i801: Add support for 82801DB (ICH4)
1255  Module i2c-i810: Flush posted writes
1256  Module i2c-savage4: new
1257  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1258  Module i2c-voodoo3: Flush posted writes
1259  Module ds1307: New
1260  Module lm92: New
1261  Module smbus-arp: new
1262  Module smsc47m1: new
1263  Module via686a: Add support for VT8231 sensors
1264  Module vt1211: new
1265  Module w83781d: Add multiple VID version support; fix temp alarms
1266  Program eeprom: new
1267  Program i2cdump: Add smbus block command specification, add PEC support
1268  Program lm_sensors.init: new
1269  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1270                   pcf8574, pcf8591, smsc47m1, vt1211
1271  Program p4b_smbus: Add support for ICH4
1272  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1273  Program sensord.init: Renamed, was prog/init/sensors
1274  Program sensord: Major update, now requires rrd source;
1275                   not compiled by default
1276  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1277                   (don't display algo. and adap.) option;
1278                   add vt1211, smsc47m1, lm92
1279  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1280                          add 82801DB, LM85; fix perl warnings;
1281                          generate /etc/sysconfig/lm_sensors for
1282                          lm_sensors.init script
12842.6.3 (20020322)
1285  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1286  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1287  File doc/chips/it87: add more temp_type help
1288  File Un-ignore it87 in8, temp3, fan3;
1289                        add adm1021 section; add lm87 AIN[1,2] template;
1290                        swap negative voltage limits for 782d,783s,627hf,
1291                        697hf,it87; add more it87 help; swap neg. voltage
1292                        limits for lm78(-j), lm79, w83781d, as99127f
1293  Library: Add PCF8591, W83697HF, ADM1023 support;
1294           fix w83* fan_min computes;
1295           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1296  Module adm1024: Add MODULE_LICENSE("GPL")
1297  Module bt869: Add s-video out and DVD resolution support
1298  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1299  Module fscscy: implement min/max for voltages and fans
1300  Module i2c-amd756: Add support for AMD768
1301  Module i2c-i810: Add support for 810E
1302  Module i2c-keywest: Big update, sync with kernel 2.4.18
1303  Module i2c-piix4: Check for uninitialized base address
1304  Module i2c-sis5595: Blacklist 645, 735
1305  Module i2c-viapro: Check for uninitialized base address
1306  Module gl518sm: Standardize /proc entries in0-3
1307  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1308               fan -> fan1; fix temp2 limit writes
1309  Module pcf8574: Add support for PCF8574A; /proc interface changed
1310  Module pcf8591: new
1311  Module sis5595: Blacklist 645, 735
1312  Module w83781d: Add W83697HF support; allow force_subclients parameter
1313                  for Tyan 2460
1314  Programs, Update for new /proc names
1315  Program new
1316  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1317                   add text output
1318  Program init/sensors: New SysV init script
1319  Program Add support for fscscy, add more help entries
1320  Program p4b_smbus: new
1321  Program rrd: Install summ_week.cgi
1322  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1323                   clean up chassis intrusion prints
1324  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1325                          fix Via686a and it87 detection;
1326                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1327                          fix uninitialized values; it87 beats lm78
13292.6.2 (20011118)
1330  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1331  Chip Modules (all): malloc.h -> slab.h
1332  Modules (all): Add MODULE_LICENSE("GPL")
1333  File doc/FAQ: More updates and additions
1334  File Fix it87 in5,in6 (-12,-5) calculations
1335  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1336           update it87 alarm ID's.
1337  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1338  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1339  Module i2c-amd756: Improve busy handling/printk's
1340  Module i2c-i801: Add 82801CA/CAM support
1341  Module i2c-keywest: Sync with PPC people, it works now
1342  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1343  Module i2c-viapro: Add Via VT8233 support
1344  Module it87: Merge alarm_* /proc entries to alarms
1345  Module sis5595: Fix support for rev B0
1346  Module via686a: Make limit initializations reliable
1347  Module w83781d: Allow init=0 parameter to bypass initialization
1348  Program isadump: Add flat address space (PCI) support
1349  Program Add support for i2c-ali1535, adm1024, ds1621,
1350                      fscpos, it87, maxilife, mtp008
1351  Program sensors: Fix w83781d temp precision
1352  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1353                          Fujitsu Poseidon and Scylla,
1354                          Intel 82443MX and 82801CA/CAM detection,
1355                          add ITE 8172G detection (driver in kernel 2.4.10)
13572.6.1 (20010830)
1358  File BUGS: Updated
1359  File doc/FAQ: More updates and additions
1360  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1361  File Fix/enhance it87 section
1362  Library: ds1621 and it87 updates
1363  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1364  Module i2c-amd756: Add AMD 766 support
1365  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1366  Module i2c-piix4: Add Serverworks CSB5 support
1367  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1368  Module adm1025: Fixed temp2 min/max writes
1369  Module ds1621: Add 12-bit precision mode
1370  Module it87: Enable all alarms, add in8 support, add sensor type selection
1371  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1372                  remove support for module
1373  Module sis5595: Recognize unsupported chips and refuse to load
1374  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1375  Program eepromer: new
1376  Program Fix dependencies on i2c-proc; disallow compilation
1377                      of sensors.c as a module in kernel
1378  Program sensors: it87 updates; adjust temp. precision for some chips
1379  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1380                          recognize unsupported SiS chips;
1381                          recognize AMD 766 and Serverworks CSB5.
13832.6.0 (20010612)
1384  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1385        If your make fails because it can't find <linux/i2c-proc.h>, you
1386        forgot this step!!!
1387  File doc/FAQ: Many, many updates and additions
1388  File doc/busses/i2c-sis5595: new
1389  File doc/busses/i2c-tsunami: new
1390  File doc/chips/it87: new
1391  File doc/chips/via686a: Claim support for 686b.
1392  File README.thinkpad: new
1393  File Adjust as99127f in5 (-12V) and temp2 calculations;
1394                        Add lm87, adm9240, ds1780, lm81 templates;
1395                        Enhance help comments in file;
1396                        Add Tyan S2510 dual-MTP008 example;
1397                        Make separate sis5595 section.
1398  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1399  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1400  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1401           Add support for maxilife-nba and amd1024;
1402           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1403  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1404  Chip Modules (all): Change from sensors_* to i2c_* globals
1405                      for new i2c-proc.[ch]
1406  Makefiles: enhance to support Alpha architecture
1407  Module adm1021: Fix lm84 and gl523sm support
1408  Module adm1024: new
1409  Module i2c-i801: Chip detection cleanup
1410  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1411  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1412  Module i2c-tsunami: New
1413  Module i2c-via: Ensure i2c bus is tristated correctly.
1414  Module it87: new driver for IT8705, IT8712, Sis950 chips
1415  Module lm78: Recognize chipid=0x20
1416  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1417  Module mtp008: Fix temp initializations;
1418                 Save BIOS pin configuration of temps and fans;
1419                 Fix sensor type reads/writes and fan min writes;
1420                 Fix spurious invalid sensor type messages
1421  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1422                  used for patched kernel now.
1423                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1424  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1425                  Allow force_addr=0xaddr
1426  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1427  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1428                  reading changes; Add messages for subclient
1429                  registration failure
1430  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1431  Program i2cset: new
1432  Program isadump: fix for Alpha arch. compiles
1433  Program Fix adm9240 typos; Add more chips to;
1434                      Remove ltc1710; Fix i2c_sis5595 typo;
1435                      Support kernel 2.4.5 makefile change;
1436                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1437  Program sens_update_rrd: new
1438  Program sensord: Add -d (debug) and -p (pid-file) options
1439  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1440                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1441                   Change mtp008 temps from max/min to limit/hyst;
1442                   Add maxilife-nba, adm1024, it87 support.
1443  Program sensors-detect: Recognize lm78 with chipid=0x20;
1444                          Recognize SMSC Victory66 South Bridge;
1445                          Add devfs /dev/i2c/x support;
1446                          Add adm1024, it87xx support; Add thinkpad warning.
1447  Program tellerstats: new
14492.5.5 (20010115)
1450  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1451        you have kernel 2.4.0-prerelease or greater.
1452  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1453  File doc/developers/proc: new
1454  File Add mtp008 entries, adm1025 entries
1455  Library: Add ds1621, mtp008 support
1456  Module adm1021: Add support for adm1021a / adm1023
1457  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1458  Module adm1025: Add support for remote temp; rename /proc entries to
1459                  in[0-5] and temp[1-2]; fix negative temp readings
1460  Module adm9240: Rename /proc entries to in[0-5]
1461  Module ddcmon: allow force and force_ddcmon parameters
1462  Module ds1621: new
1463  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1464  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1465  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1466  Module lm87: cleanup, update voltage calculations
1467  Module mtp008: new
1468  Module pcf8574: change update time to 5 seconds
1469  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1470  Module w83781d: fix beep setting via /proc
1471  Programs editticket, readticket: new
1472  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
1473  Program more fixes; now adds many more modules
1474  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1475                   add adm1025 temp2; report temp limits correctly as
1476                   min/max or limit/hysteresis; print message if no
1477                   sensors are found. Removed false errors from lm87 reads.
1478  Program sensors-detect: Add ds1621, mtp008 detection;
1479                          add ServerWorks detection
14812.5.4 (20001012)
1482  Module i2c-viapro: Add support for Via 596B (0x3051)
1483  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1484  Program fixed infinite loop
1485  Program sensors-detect: Detect Via 596B (0x3051)
14872.5.3 (20001008)
1488  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1489  File useful_addresses.html: update
1490  Library: Add lm87 support
1491  Module pcf8574: new
1492  Module i2c-ali1535: new
1493  Module i2c-ali15x3: removed force #ifdef.
1494  Module i2c-i801: support Intel 82801BA (815E chipset)
1495  Module i2c-i801: add i2c block write support, fix smbus block bugs
1496                   (requires i2c 2.5.3 package)
1497  Module i2c-i810: support Intel 82815
1498  Module lm87: new
1499  Module sensors: Fix for kernel 2.4.0-test8
1500                  (remove copy_to_user_ret and put_user_ret)
1501  Module w83781d: limit fan divisors to 8 max. for as99127f
1502  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1503  Program i2cdump: Add smbus block read support
1504  Programs i2cdetect, i2cdump: Improve error reporting
1505  Program sensors: new switch -u (--unknown)
1506  Program sensors-detect: detect Intel 82801BA (815E chipset)
1507  Program sensors-detect: detect Intel 82815
1508  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1509  Program sensors-detect: detect National LM87
1510  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1511  Program sensors-detect: Improve error reporting
15132.5.2 (20000709)
1514  File Fix lm80 in8 calculation
1515  Module w83781d: W83783S no longer crashes on unloading
1516  Program sensors-detect: more robustness in case of unknown i2c adapters
1517  Program sensors-detect, libsensors: fix eeprom size reporting
1518  Program sensord: more flexibility, support for alarm scanning etc.
1519  Program sensors: support for ignore setting on sensor alarms.
1520  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
15222.5.1 (20000618)
1523  Library: Add adm1025 support
1524  Module adm1025: new
1525  Module ddcmon: Fixed bus scan which could hang SMBus
1526  Module i2c-keywest: new
1527  Module maxilife: Add support for Maxilife '99 (NBA)
1528  Module via686a: Enable sensors if not enabled by BIOS
1529  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1530  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1531  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1532  Module w83781d: Fis as99127f fan speed (was 66% too high)
1533  Module w83781d: Improve beep input checking
1534  Program i2cdump: Add Winbond-style bank selection
1535  Program isadump: Add Winbond-style bank selection
1536  Program sensors: Add adm1025 support.
1537  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1538  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1539  File Add Maxilife '99 entries
1540  File Remove some as99127f entries.
1541    Note: For as99127f, reinstall manually (make install
1542          won't reinstall it) or else 'sensors -s' will fail.
15442.5.0 (20000312)
1545  Dropped all kernel 2.0 and 2.1 compatibility
1546  Module i2c-i810: new
1547  Module ddcmon: new
1548  Module via686a: new
1549  Module i2c-amd756: fixed region request
1550  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1551  Module w83781d: Don't change pin settings at initialization;
1552                  also fix chip detection.
1553  Library: Support for ddcmon and via686a
1554  Program sensors-detect: Support for ddcmon and via686a
1555  Program sensors: Support for eeprom, ddcmon and via686a
15572.4.5 (20000116)
1558  Introduced DESTDIR installation prefix
1559  Module lm80: fixes, temperature now read and set correctly
1560  Module i2c-voodoo3: driver enhancements
1561  Module w83781d: fixes, AS99127 works much better now
1562  Library: New ignore keyword in config file
1563  Programs: Support for new ignore keyword
1564  Program sensors-detect: Support for MGA detections
15662.4.4 (19991201)
1567  Addition of the alpha release of AMD 756 SMBus host support.
1568  Many fixes and updates to the gl518sm driver
1569  Updates and fixes for device detection
15712.4.0 (19990920)
1572  Too much to list.
1573  i2c and smbus parts are split off to a separate i2c package.
1574  New drivers and other stuff.
15762.3.4 (19990616)
1577  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1578  All: Now compiles against kernel 2.0.x (again ;)
1579  Module gl518sm: some updates and refinements
15812.3.3 (19990603)
1582  All: Now compiles against kernel 2.3.x (x >= 1)
1583  Module i2c-voodoo3: Timing issue fixes
1584  Module bt869: Seems to be functional and relatively well tested
1585  Many modules were modified to be more compatible with the new
1586   Mutex structure in the new experimental kernels.
15882.3.2 (19990507)
1589  Module i2c-hydra: Now compiles on 2.0.x kernels
1590  Module i2c-lm75: Slightly better detection
1591  * New, but not compiled by default:
1592  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1593  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
15952.3.1 (19990501)
1596  All: Now compiles on PPC
1597  Module i2c-hydra: NEW
1598  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1599  Module w83781d: Removed deadlock (mutex was not initialized)
1600  Documentation: A few glitches removed
1601  Makefile: default module installation directory is now
1602            /lib/modules/current/extra/misc
1603  Program sensors-detect: PPC Hydra now detected
1604  Program sensors: Now prints complete GL518SM information
1605  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
16072.3.0 (19990422)
1608  All: Many, many changes and improvements
1609  All: Many small bugs and problems removed
1610  Modules: New insmod parameters
1611  Modules: Much improved chip detection
1612  Module maxilife: NEW
1613  Module adm1021: MAX1617A now also supported
1614  Module adm9240: DS1780 now also supported
1615  Module w83781d: W83782D and W83783S now also supported
1616  Program sensors-detect: NEW
1617  Library: All chips now supported
1618  Documentation: Very much improved
16202.2.2 (199903??)
1621  Just some minor updates and bug fixes.
16232.2.1 (19990218)
1624  All: Removed compile warnings
1625  Module i2c-dev: Small bug removed if DEBUG=1 was used
1626  Module sis5595: Now compiles for 2.0 kernels
1627  Module adm1021: Detection corrected
16292.2.0 (19990216)
1630  All: Set copyrights to include 1999
1631  All: Small bugfixes
1632  I2C: Upgraded to newest archive of Simon Vogl
1633  Module i2c-dev: NEW
1634  Module i2c-ali15x3: NEW
1635  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1636     directories, and somewhat improved
1637  Module sis5595: NEW
1638  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1639  Library: Support for new chip drivers, several small bugs fixed
1640  Library manual pages: NEW
1641  Program i2cdetect: Moved to detect directory
1642  Program NEW
1643  Program doc-features: NEW
1644  Program sensors: Added man-page
1645  Document BUGS: Added cdrom bug and kernel i2c conflict
16472.1.2 (19990116)
1648  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1649  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1650  Documentation in doc/kernel: NEW
16522.1.1 (19990107)
1653  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1654                     and older
1655  Module gl518sm.o: Miscelaneous bugs and problems solved
1656  Program isadump: NEW
16582.1.0 (19981230)
1659  Library: Completely NEW
1660  Program sensors: NEW
1661  Program grab_busses: NEW
1662  Program decode-dimms: More information
1663  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1664  Module w83781d.o: NEW
1665  Module lm80.o: NEW
1666  Module gl518sm.o: new procfile beep, several small updates
1667  Modules: Now use pin readings, no more scaling within the kernel (use the
1668           library instead)
16702.0.2 (19981214)
1671  Module eeprom.o: NEW
1672  Program decode-dimms: NEW
1673  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1674           2.1.58
1675  Modules: Somewhat less verbose on transfers
1676  Module lm78.o now recognizes and handles lm78-j and lm79
16782.0.1 (1998121?)
1679  Module gl518sm.o updates, to make it actually work
1680  Module lm75.o high/low-byte swapping write bug fixed
16822.0.0 (19981209)
1683  Initial release
Note: See TracBrowser for help on using the browser.