root/lm-sensors/branches/lm-sensors-3.0.0/CHANGES @ 5076

Revision 5076, 2.7 KB (checked in by khali, 8 years ago) Fix voltage value references in compute statements. The
measured voltage value are now named inX_input, not just inX, but the
default configuration file was not properly updated to reflect this. This
caused errors to be displayed by "sensors" for the g520sm, lm80 and pc87366
chips. Reported by Aurelien Jarno.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm-sensors CHANGES file
5  documentation: Update the application writing guidelines
6  libsensors: No longer depend on libsysfs
7  Makefile: No warnings about ld configuration for staged installations
8  pwmconfig: Really hide errors on sysfs writes
9             Deal gracefully with read-only pwm_enable files
10             Warn about outputs found in automatic mode
11  sensord: Fix rrd support (#2276)
12           Use the same colors for daily and weekly charts
13           Drop workaround needed by old versions of rrdtool
14 Fix voltage value references (g520sm, lm80, pc87366)
15  sensors-detect: Drop PCA9540 detection
173.0.0 (2007-11-24)
18  Makefile: Fix MODULE_DIR usage in etc
19            Fix build on PPC
20  pwmconfig: Better diagnostics in pwmdisable
21             Give the fans some time to spin up
22  sensors-detect: Add Texas Instruments TMP401 detection
23                  Mention the f75375s driver
24                  Add SMSC LPC47B367-NC detection (no sensors)
25                  Reduce w83781d/lm78 I2C address probing range
26                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection
283.0.0-rc3 (2007-10-28)
29  libsensors: Add a default configuration file
30              Fix memory leaks on initialization error
31              Make the configuration file optional
32              Change the default configuration file to /etc/sensors3.conf
33  sensord: Reload config on SIGHUP rather than automatically
34           No default configuration file name
35  sensors: Fix file handle leak on library initialization error
36           Handle the case where voltage measurements aren't available
37           No default configuration file name
38           Install as sensors again
39 Install as sensors3.conf
40  sensors-detect: Fix SMSC LPC47B357/M967 detection
41                  Select the right driver for FSC chips
42 Handle alternative chip lists
443.0.0-rc2 (2007-10-10)
45  useful_addresses.html: Moved to the wiki
46  Makefile: Add sensors-conf-convert to make install
47  libsensors: Notify the caller when writing a value fails
48              Differentiate between different read error types
49              Report I/O errors as such
50  sensord: Log the error code on failure
51           Drop the configuration file search path mechanism (#2259)
52           Manual page update
53  sensors: Fix spurious critical temperature alarm
54           Print error messages to stderr
55           Make error messages more helpful and consistent
56           Better handling of the fault flags
57  sensors-conf-convert: Add a short help text
58  sensors-detect: Fix SMSC SCH311x detection
59                  Add AMD K10 CPU sensor detection
613.0.0-rc1 (2007-09-25)
62  Initial release
Note: See TracBrowser for help on using the browser.