root/lm-sensors/branches/lm-sensors-3.0.0/CHANGES @ 5169

Revision 5169, 3.9 KB (checked in by khali, 7 years ago)

The configuration file is currently parsed in the locale set by the main
program using the library. This means that if the decimal separator
(defined in LC_NUMERIC) is not '.' the values in the compute lines are
truncated. This happens for example with sensors-applet and a French

Parsing the configuration file in C locale fixes the problem.
Original patch from Aurelien Jarno.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm-sensors CHANGES file
5  libsensors: Use __func__ instead of __FUNCTION__
6              Parse the configuration file in C locale
7  sensors-detect: Add SMSC SCH5027D detection
8                  Do not access I/O ports on PPC
9                  Move south bridge sensor detection to the right section
10                  Run chip_special_cases() earlier
11                  New device ID for the SMSC SCH5317
133.0.1 (2008-01-28)
14  documentation: Update the application writing guidelines
15  libsensors: No longer depend on libsysfs (#2262)
16              Don't guess the bus type from the device ID format (#2240)
17              Add support for attributes in the hwmon class device (#2260)
18  Makefile: No warnings about ld configuration for staged installations
19            Document the variable overriding mechanism (#2296)
20  pwmconfig: Really hide errors on sysfs writes
21             Deal gracefully with read-only pwm_enable files
22             Warn about outputs found in automatic mode
23             Repeat available configuration options before prompt (#2289)
24             Fix duplicate warning message when config file is broken
25  fancontrol: Detect improperly formatted FCTEMPS value (#2293)
26  sensord: Fix rrd support (#2276)
27           Use the same colors for daily and weekly charts
28           Drop workaround needed by old versions of rrdtool
29  sensors: Fix error path on library initialization error
30 Fix voltage value references (g520sm, lm80, pc87366)
31  sensors-detect: Drop PCA9540 detection
32                  Improve sysconfig and modprobe.d integration
33                  Add SMSC SCH5514D-NS detection (no sensors)
34                  Lower the confidence of MAX6650/MAX6651
35                  Add Fintek F71858DG detection
36                  Add Fintek F81216D detection (no sensors)
37  unhide_ICH_SMBus: Add support for the 82801AA (ICH)
393.0.0 (2007-11-24)
40  Makefile: Fix MODULE_DIR usage in etc
41            Fix build on PPC
42  pwmconfig: Better diagnostics in pwmdisable
43             Give the fans some time to spin up
44  sensors-detect: Add Texas Instruments TMP401 detection
45                  Mention the f75375s driver
46                  Add SMSC LPC47B367-NC detection (no sensors)
47                  Reduce w83781d/lm78 I2C address probing range
48                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection
503.0.0-rc3 (2007-10-28)
51  libsensors: Add a default configuration file
52              Fix memory leaks on initialization error
53              Make the configuration file optional
54              Change the default configuration file to /etc/sensors3.conf
55  sensord: Reload config on SIGHUP rather than automatically
56           No default configuration file name
57  sensors: Fix file handle leak on library initialization error
58           Handle the case where voltage measurements aren't available
59           No default configuration file name
60           Install as sensors again
61 Install as sensors3.conf
62  sensors-detect: Fix SMSC LPC47B357/M967 detection
63                  Select the right driver for FSC chips
64 Handle alternative chip lists
663.0.0-rc2 (2007-10-10)
67  useful_addresses.html: Moved to the wiki
68  Makefile: Add sensors-conf-convert to make install
69  libsensors: Notify the caller when writing a value fails
70              Differentiate between different read error types
71              Report I/O errors as such
72  sensord: Log the error code on failure
73           Drop the configuration file search path mechanism (#2259)
74           Manual page update
75  sensors: Fix spurious critical temperature alarm
76           Print error messages to stderr
77           Make error messages more helpful and consistent
78           Better handling of the fault flags
79  sensors-conf-convert: Add a short help text
80  sensors-detect: Fix SMSC SCH311x detection
81                  Add AMD K10 CPU sensor detection
833.0.0-rc1 (2007-09-25)
84  Initial release
Note: See TracBrowser for help on using the browser.