root/lm-sensors/branches/lm-sensors-3.0.0/CHANGES @ 5186

Revision 5186, 4.4 KB (checked in by khali, 7 years ago)

Minor readability adjustments.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm-sensors CHANGES file
5  libsensors: Use __func__ instead of __FUNCTION__
6              Parse the configuration file in C locale
7              Late compute statements override early ones
8              Support virtual hwmon devices (#2309)
9              Support power and energy sensors
10  pwmconfig: Don't create the configuration file before it's needed
11             Don't preserve configuration file customizations
12             Fix permissions of the configuration file
13             Don't start if fancontrol is running (#2299)
14  fancontrol: Don't start if already running (#2299)
15              Delete at exit time (#2299)
16  sensors-detect: Add SMSC SCH5027D detection
17                  Do not access I/O ports on PPC
18                  Move south bridge sensor detection to the right section
19                  Run chip_special_cases() earlier
20                  New device ID for the SMSC SCH5317
21  sensors: Print energy and power sensors with automatically scaled units
233.0.1 (2008-01-28)
24  documentation: Update the application writing guidelines
25  libsensors: No longer depend on libsysfs (#2262)
26              Don't guess the bus type from the device ID format (#2240)
27              Add support for attributes in the hwmon class device (#2260)
28  Makefile: No warnings about ld configuration for staged installations
29            Document the variable overriding mechanism (#2296)
30  pwmconfig: Really hide errors on sysfs writes
31             Deal gracefully with read-only pwm_enable files
32             Warn about outputs found in automatic mode
33             Repeat available configuration options before prompt (#2289)
34             Fix duplicate warning message when config file is broken
35  fancontrol: Detect improperly formatted FCTEMPS value (#2293)
36  sensord: Fix rrd support (#2276)
37           Use the same colors for daily and weekly charts
38           Drop workaround needed by old versions of rrdtool
39  sensors: Fix error path on library initialization error
40 Fix voltage value references (g520sm, lm80, pc87366)
41  sensors-detect: Drop PCA9540 detection
42                  Improve sysconfig and modprobe.d integration
43                  Add SMSC SCH5514D-NS detection (no sensors)
44                  Lower the confidence of MAX6650/MAX6651
45                  Add Fintek F71858DG detection
46                  Add Fintek F81216D detection (no sensors)
47  unhide_ICH_SMBus: Add support for the 82801AA (ICH)
493.0.0 (2007-11-24)
50  Makefile: Fix MODULE_DIR usage in etc
51            Fix build on PPC
52  pwmconfig: Better diagnostics in pwmdisable
53             Give the fans some time to spin up
54  sensors-detect: Add Texas Instruments TMP401 detection
55                  Mention the f75375s driver
56                  Add SMSC LPC47B367-NC detection (no sensors)
57                  Reduce w83781d/lm78 I2C address probing range
58                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection
603.0.0-rc3 (2007-10-28)
61  libsensors: Add a default configuration file
62              Fix memory leaks on initialization error
63              Make the configuration file optional
64              Change the default configuration file to /etc/sensors3.conf
65  sensord: Reload config on SIGHUP rather than automatically
66           No default configuration file name
67  sensors: Fix file handle leak on library initialization error
68           Handle the case where voltage measurements aren't available
69           No default configuration file name
70           Install as sensors again
71 Install as sensors3.conf
72  sensors-detect: Fix SMSC LPC47B357/M967 detection
73                  Select the right driver for FSC chips
74 Handle alternative chip lists
763.0.0-rc2 (2007-10-10)
77  useful_addresses.html: Moved to the wiki
78  Makefile: Add sensors-conf-convert to make install
79  libsensors: Notify the caller when writing a value fails
80              Differentiate between different read error types
81              Report I/O errors as such
82  sensord: Log the error code on failure
83           Drop the configuration file search path mechanism (#2259)
84           Manual page update
85  sensors: Fix spurious critical temperature alarm
86           Print error messages to stderr
87           Make error messages more helpful and consistent
88           Better handling of the fault flags
89  sensors-conf-convert: Add a short help text
90  sensors-detect: Fix SMSC SCH311x detection
91                  Add AMD K10 CPU sensor detection
933.0.0-rc1 (2007-09-25)
94  Initial release
Note: See TracBrowser for help on using the browser.