root/lm-sensors/tags/V2-10-2/CHANGES @ 6057

Revision 4297, 76.2 KB (checked in by phil, 9 years ago)

Prep for 2.10.2 release.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
42.10.2 (20070115)
5  RPM: Obsolete, removed
6  File doc/fan-divisors: Update
7  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
8  Library: Add support for the pc87247 driver (fans only)
9           Probe for busses before chips
10           Drop support for algorithm names
11           Add support for coretemp driver   
12           Major update/optimization of config-file scanner
13           Add config-file scanner regression tests
14           Add f71872f support
15           Add w83627dhg support (David Holl, #2157)
16           Get the i2c adapter names from
17           Add adm1029 support (Corentin Labbe)
18  Man page i2cdetect.8: Describe the output convention
19  Man page sensors.1: Update (option -c) and clean up
20  Module bmcsensors: Fix several warnings
21                     Fix fragile structure initialization
22  Module i2c-i801: Add ICH9 support
23  Module p4b_smbus: Add support for the ICH5
24  Module f71805f: Fix the device address decoding (2.6 backport)
25  Module icspll: Delete. It was useless and dangerous.
26  Program Remove spaces at end of lines
27  Program eepromer: Fix loads of warnings
28  Program i2cdetect: Make the output clearer
29  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
30  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
31                            without need of recompilation.
32  Programs dump/*: More robust handling of user inputs
33  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
34                                  Add support for non-i2c drivers
35  Program Disable debugging by default
36                         Add support for non-i2c drivers
37                         More tolerant config file parsing
38  Program sensord: Add pc87247 support (fans only)
39                   Add vt1211 support (#2150)
40                   Add w83627dhg support (David Holl, #2157)
41                   Add w83627ehf voltage support (Dave Platt)
42                   Add k8temp support (Dave Platt)
43  Program sensors: Add pc87247 support (fans only)
44                   Hide error on missing f71805f fan
45                   Handle option -c more efficiently
46                   Drop option -a (show algorithm names)
47                   Add f71872f support
48                   Add w83627dhg support (David Holl, #2157)
49                   Add adm1029 support (Corentin Labbe)
50                   Hide error on missing w83793 temp (Gong Jun)
51  Program sensors-detect: Add SMSC DME1737 detection
52                          Add Fintek F71882FG and EPoX EP1308 detection
53                          Add Intel Core thermal sensor detection
54                          Preallocate memory for I2C_FUNCS ioctl (#2138)
55                          Prevent misdetection of MAX6633/MAX6634/MAX6635
56                          Add Intel ICH9 detection
57                          Add Maxim MAX6648/MAX6692 detection
58                          Improve ADM1029 detection
59                          Add Andigilog chips detection
60                          Add Intel AMB FB-DIMM thermal sensor detection
61                          Add ATI SB600 detection
642.10.1 (20060924)
65  File doc/developers/checklist renamed to dev/developers/release_checklist
66          with clarifications and updates for new SVN server.
67  File README.package: Delete.
68  File doc/busses/i2c-piix4: Update (2.6 backport)
69  File doc/developers/sysfs-interface: Update
70  File etc/ Add an smsc47m192 section
71                            Comment out all set statements
72                            Add an it8716 section
73                            Add a w83793 section
74                            Adjust the vt1211 section to match the new driver
75                             interface
76  Library: Fix device scan when no i2c support is present
77           Add support for W83627EHF voltage inputs and alarms
78           Add support for the smsc47m192 driver
79           Fix all memory leaks (yeah!)
80           Fix no sensors being reported as an error
81           Add support for the IT8716F and IT8718F chips
82           Add support for the W83793 chip (Yuan Mu)
83           Map the 2.6 adm1026's fan8 to fan0
84           Missing sysfs busses and classes are not errors
85           Change vt1211 temp3-7 magnitude from 1 to 3
86  Makefile: Don't grep autoconf.h on user-space targets
87            Fix depmod on non-running kernel version
88            Remove empty include directories on make user_uninstall
89  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
90  Module i2c-amd756-s4882: Improve static semaphore initialization
91                           (2.6 backport)
92  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
93                   Add ICH8 support (2.6 backport)
94                   Fix block transaction poll loops (2.6 backport)
95                   Remove PCI function check (2.6 backport)
96                   Cleanups (2.6 backport)
97  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
98  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
99                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
100                    Drop the fix_hstcfg parameter (2.6 backport)
101  Module i2c-viapro: Fix compilation with kernels < 2.4.21
102                     Add VT8237A and VT8251
103  Module lm83: Add LM82 support (2.6 backport)
104  Module vt1211: The VT1211 has no in6
105                 Rework the voltage and temperature conversions and the
106                  temperature input order to match the Linux 2.6 driver
107  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
108                  Add specific alarm and beep defines for the W83791D
109  Module w83792d: Fix PWM range (2.6 backport)
110  Program Decode depending on the memory type
111                           Decode the manufacturing date to an ISO8601 date
112                           Add the memory size computation and provide brief
113                            timing characteritics for SDRAM/DDR/DDR2 memory
114                           Add memory size computation for Rambus memory
115                           Various output cleanups and fixes
116  Program Add /usr/sbin or /usr/local/sbin to $PATH if needed
117  Program Detect and skip false positives
118  Program i2cdetect: Add a mode to print adapter functionalities
119  Program i2cdump: Restore bank after bank switching
120                   Add new mode W (read word on even register addresses)
121  Program mkpatch: Fix typo breaking f71805f
122                   Turn warnings on (-w), and fix them
123                   Print a usage message on missing command line parameters
124  Program pwmconfig: Use mktemp instead of tempfile
125  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
126                   Add smsc47m192 support
127                   Add abituguru support (Hans de Goede)
128                   Fix memory leak when printing an unknown chip
129                   Add it8716 and it8718 support
130                   Make each it87 fan and fan div optional
131                   Print missing w83791d values
132                   Add w83793 support (Yuan Mu)
133                   The adt7463 may not have in4 (#2119)
134                   Hide more vt1211 missing input errors
135                   Clearer error messages when no sensors found
136  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
137                          Add ATI IXP200/300/400 SMBus detection
138                          Prevent warning on 64-bit PCI addresses
139                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
140                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
141                           F75384S/M, F75387SG/RG and F81218D detection
142                          Add Winbond W83793R/G and W83627DHG detection
143                          Handle the W83791D driver difference between kernels
144                          Add nForce4 MCP04, MCP51 and MCP55 detection
145                          Add AMD Geode devices detection
146                          Add ITE IT8716F and IT8718F detection
147                          Add NatSemi/Winbond PC87427 detection
148                          Get driver information for busy addresses from
149                           sysfs (2.6 only)
150                          Drop the ISA IT87xxF detection
151                          Check i2c adapter functionalities before probing
152                          Add Intel ICH8 SMBus detection
153                          Add AMD K8 thermal sensors detection
154                          Simplify detection of SiS5595, VIA686 and VT8231
155                          Add Analog Devices ADM1033, ADM1034, ADT7462,
156                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
157                          Check for root user at startup
158                          Attempt to be slightly more user-friendly
159                          Add VT8237A and VT8251
160                          Remove detection of nVidia graphics adapters
161                          Use sysfs for PCI device enumeration
162                          Add generic PCI SMBus adapter detection
163                          Add generic Super-I/O logical device detection
164                          Add SMSC LPC47M172/182 detection
1672.10.0 (20060214)
168  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
169  File doc/busses/i2c-viapro: Update (2.6 backport)
170  File doc/chips/via686a: Update (2.6 backport)
171  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
172  File etc/ Do not set vrm by default
173  File i2c-dev.h: Fix union i2c_smbus_data definition
174                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
175                  Add missing parentheses around macros
176                  Drop I2C_FUNC_SMBUS_EMUL
177                  Drop I2C_FUNC_SMBUS_*_PEC
178                  Drop I2C_SMBUS_*_PEC
179  File sensors_vid.h: Drop default VRM
180  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
181           This is intentional.  Use if you still
182           need your memory SPD data.
183  Library: Big update to use libsysfs.  More TODO though.
184           Fix bus matching code for Linux 2.6 (Karsten Petersen)
185           Add f71805f, w83687thf support
186           Add platform drivers support
187           Fix sysctl warnings on x86_64
188           Restore vt1211 temp1
189  Makefile: Compile user-space programs with -Wundef
190  Module i2c-i801: Simplify the hardware PEC code
191                   Always set PEC mode explicitly before each transaction
192  Module i2c-i810: Documentation update, PCI IDs cleanup
193  Module i2c-keywest: Remove bus probing code (2.6 backport)
194  Module i2c-nforce2: Remove dead code (2.6 backport)
195                      Add the ID of the nForce4 MCP-04 (2.6 backport)
196  Module i2c-via: Remove dead code
197  Module i2c-viapro: Remove dead code
198                     Support I2C block read (2.6 backport)
199                     Code cleanups (2.6 backport)
200                     Improve debug register dump (2.6 backport)
201  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
202          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
203          i2c-sis645: Use pci_driver name to request I/O region; do
204                      not initialize i2c_adapter name to "unset" (2.6
205                      backport)
206  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
207                                              (2.6 backport)
208  Module adm9240: Cleanups (2.6 backport)
209  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
210  Module it87: Minor cleanups
211               Fix fan3_div setting bug (Anton V. Staaf)
212  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
213               Separate the register read function
214               Add PEC support for the ADM1032
215  Module via686a: Cleanups
216  Module w83627hf: Drop useless initialization step (2.6 backport)
217                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
218                   Fix alarms (Yuan Mu)
219                   Preserve fan min on fan div change (Yuan Mu)
220                   Properly handle W83627THF without VID (Yuan Mu)
221                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
222                   Add W83687THF support
223  Module w83781d: Drop W83697HF support (Grant Coady)
224  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
225                  Fix fan control mode (PWM/DC) reporting
226                  Fix fan div auto-adjust (Yuan Mu)
227                  Fix the subclient handling
228  Module w83l785ts: Minor cleanup (2.6 backport)
229  Module vt1211: Restore temp1
230  Modules vt1211, vt8231: Change default VRM to 9.1
231  Program Add lookup tables for manufacturer names
232                           Fix rounding error in PCxxxx speed computation
233                           Improve text output
234                           Improve speed under Linux 2.6
235                           Verify checksum before decoding anything
236                           Improve manufacturing location decoding
237                           Improve memory type detection
238                           Improve part number decoding
239  Program i2cdump: Drop now useless #ifdef tests
240                   Fix capability check for continuous byte mode
241  Program i2cget: New
242  Program i2cset: Add PEC support
243                  Fix argc check
244  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
245                                       Print the correct bus type if bus
246                                       functionality can be queried
247  Program isadump: Display the real addresses in flat mode
248  Program Silently skip already existing nodes
249  Program mkpatch: Include f71805f
250  Program sensord: Do not log algorithm names
251                   Drop EEPROM support (Aurelien Jarno)
252                   Add W83627EHF, F71805F/FG support
253                   Fix PC87365/PC87366 alarms
254  Program sensors: Drop free_the_label
255                   Fix compilation with uclibc (no iconv)
256                   Add f71805f, w83687thf support
257  Program sensors-detect: Drop algorithm names
258                          Do not rely on i2cdetect -l printing algo names
259                          Simplify adapter name matching mechanism
260                          New address for ADM1032, ADT7461
261                          Improve ADT7467, ADT7468 support
262                          Fix MAX6659 reported driver
263                          Add Fintek F71805F detection
264                          Add Analog Devices ADT7476 detection
265                          Add Intel 82845G detection
266                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
267                          Fix udev detection in some corner case
268                          Improve DS1621 detection
269                          Always prefer ISA access over SMBus access
2722.9.2 (20050906)
273  File doc/chips/*: Big update (2.6 backport)
274  Library: Drop ds1780-specific code (now use adm9240)
275           Fix memory leak in sensors_get_label()
276           Support /sys/class/hwmon (Linux 2.6.14+)
277           Limit stack usage in sensors_read_proc_chips()
278  Makefile: Detect 2.6+ kernels and check targets
279  Man page isaset.8: Fix typos
280  Module adm1031: Fix broken kfree() calls
281  Module i2c-ali1563: New (2.6 backport by Winbond)
282  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
283  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
284          w83627hf.c: Tag find function __init
285  Module lm93: Fix memory leak
286  Module smsc47m1: Fix PWM enable polarity on read
287  Modules w83627hf, w83781d: Allow setting fan divisor to 128
288  Program Support Linux 2.6 (Burkart Lingner)
289                           Added DDR/DDR2 frequency reporting in convenient
290                           form of DDRxxx PCyyyy
291  Program i2cdump: Properly handle short i2c block reads
292  Program Fix compile errors
293  Program mkpatch: Include i2c-ali1563
294                   Include w83792d
295  Program pwmconfig: Fix unsafe temporary file use
296  Program rrd: Support 2.6 kernels
297  Program sensord: Add support for w83637hf
298                   Support pc87360 (Henrik Brix Andersen)
299  Program sensors: Support the VAIO "VGN" prefix for eeprom
300  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
301                          Advertise the w83792d driver
302                          Improve IT8705F and IT8712F detection
303                          Merge LM82 and LM83 detection
304                          Add W83687THF detection
3072.9.1 (20050412)
308  File doc/busses/i2c-nforce2: Update
309  File doc/chips/it87: Update
310  File doc/chips/lm90: Update for adt7461
311  File doc/chips/mic74: New
312  File etc/ New sections for lm92 and w83792d
313  Library: Add support for 2.6 fscpos driver (Stefan Ott)
314           Fix sis5595 in4 (Aurelien Jarno)
315           Add support for 2.6 gl520sm driver (Maarten Deprez)
316           Add support for 2.6 bmcsensors driver (Yani Ioannou)
317           Add support for w83792d (Chunhao Huang/Winbond)
318           Add support for 2.6 adt7461 (James Chapman)
319           Add support for 2.6 lm92
320           Add support for 2.6 vt1211
321           Add preliminary support for 2.6 w83627ehf
322  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
323            Use -fno-strict-aliasing on all architectures
324  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
325  Module bmcsensors: Fix compile error
326                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
327  Module ds1621: Fix detection (Aurelien Jarno)
328  Module eeprom: Discard SPD-centric checksum module parameter
329                 Cleanup detection function (backport from Linux 2.6)
330  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
331  Module i2c-i801: Temporarily disable broken I2C block read
332  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
333                   Gelato)
334  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
335  Module i2c-viapro: Prevent repeated resets
336  Module it87: Improve Super-I/O detection
337               Limit I2C address range
338               Support VID on the IT8712F
339  Module lm75: Only initialize CMP/INT bit
340  Module lm78: Fix bug with setting negative temperature limits
341  Module lm85: Properly differentiate between ADM1027 and ADT7463
342               Add EMC6D102 support
343  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
344               Add limited ADT7461 support
345  Module lm93: Fix IN10 (+5V) scaling
346  Module mic74: New
347  Module w83627hf: Support secondary Super-I/O address
348                   Enable temp2 and temp3 if they are disabled
349  Module w83781d: Revert AS99127F temp2 and temp3 computation change
350                  Skip final initialization step for AS99127F chips
351  Module w83792d: New (Chunhao Huang/Winbond)
352  Program ddcmon: New; user-space replacement for the ddcmon driver
353  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
354  Program isadump: Handle Super-I/O keys
355  Program lm_sensors.init: Cleanups (Axel Thimm)
356  Program Add basic command-line interface
357  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
358  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
359                     Don't complain about read-only enable files (lm85)
360                     Fix handling of alternate config file name
361  Program sensord: Fix erroneous error message (Aurelien Jarno)
362                   Support sis5595 in4 (Aurelien Jarno)
363                   Support w83627thf
364                   Support the separate it8712 prefix (Aurelien Jarno)
365  Program sensors: Display sis5595 in4 (Aurelien Jarno)
366                   No errors on missing pc87360 fans
367                   Add gl520sm support (Maarten Deprez)
368                   Improve vt1211 error/ignore handling (Michael Carland)
369                   Support w83792d, w83627ehf
370  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
371                          Improve IT8705F and IT8712F detection
372                          Improve udev detection
373                          Fix DS1621 detection
374                          Add W83627EHF detection
375                          Add ATI SMBus detection
376                          Add VT1211 alias detection
377                          Warn if chip modules not found
378                          Add i2c-ipmi to list if bmcsensors is on it
379                          Add PC87591 detection
380                          Search for correct udev db file name
381                          Add nForce3 250Gb and nForce4 detection
3842.9.0 (20041228)
385  NOTE: Requires i2c-2.9.0 or newer!
386  File README.thinkpad: Update
387  File doc/chips/it87: Cleanups
388  File doc/chips/lm63: New
389  File etc/ Set via686a voltage limits
390  File kernel/chips/ Resync module list with mkpatch
391  File kernel/include/sensors_compat.h: Define __devexit_p if missing
392                                        (kernels 2.4.16 and older)
393  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
394                             and dec_use removed in release 2.8.0
395  Modules (all chip drivers): Remove owner from i2c_driver; pass
396                              controlling_mod to i2c_register_entry() again
397  Module bmcsensors: Support function 1/x
398  Module i2c-amd756: Display the real bus name
399  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
400  Module i2c-i801: Support i2c block read (ICH5 and higher)
401                   Add PEC support for ICH6
402                   Add support for ICH7
403  Module i2c-ipmb: Remove from build since it doesn't work
404  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
405  Module icspll: Fix compilation
406  Module lm63: New driver for the National Semiconductor LM63
407  Module lm83: Use signed types for temperatures
408               Check limits on register writes
409  Module lm87: Round voltages properly
410               Retry on read errors (David Knierim)
411               Less agressive init (no reset)
412  Module lm90: Use signed types for temperatures
413               Check limits on register writes
414  Module lm93: Added module parameter for VID pin input thresholds.
415               Fix typo in dynamic VID alarms
416               Adds a couple log messages for failed transactions (David
417               Knierim)
418               Fix compilation breaking C99-ism (Axel Thimm)
419               Fix block read retries
420  Module pc87360: Support secondary Super-I/O address
421  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
422  Library: Add lm63 support
423           Add lpc47b397 support
424  Programs *.init: Rename lockfile to match file name
425  Programs i2cset, isaset: Written byte/word can be masked
426  Program Find eeproms on non-0 i2c bus too
427  Program mkpatch: Include i2c-amd756-s4882
428  Program pwmconfig: Handle new (well, back to old) pwm files names for
429                     Linux 2.6.10 and up
430  Program sensord: Do not scale load average (Aurelien Jarno)
431  Program sensors: Add lm63, lpc47b397 support
432                   Support DDR2 memory module EEPROMs (Rudolf Marek)
433                   Support only one location for the default configuration file
434                   Display the default configuration file location in --help
435                   Simplify the configuration file opening code
436  Program sensors-detect: Improve LM63 detection
437                          Discard IBM Thinkpad detection code
438                          Add PCA9556, LPC47B397, ICH7 detection
439                          Fix W83792D detection, add W83791SD detection
4422.8.8 (20041007)
443  File doc/donations: Update
444  File doc/lm_sensors-FAQ.texi: Add 4.6.1
445                                Update 4.7
446  File doc/chips/gl518sm: Update "iterate" info
447  File doc/chips/it87: Discard outdated module parameters
448  File doc/chips/lm75: LM77 is not supported
449  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
450  File doc/chips/lm93: New
451  File doc/chips/w83l785ts: Improvements
452  File etc/ Fix it87 lines order
453                            Update lm87 section
454  File kernel/include/sensors_vid.h: Support VRM 10.0
455  Library: Support 2.6 adm1025
456           Preliminary support for 2.6 lm87
457           Support 2.6 adm9240
458           Allow an alternative sysfs file name for chip features (2.6)
459           Fix lm83 critical limits (2.6)
460           Add lm93 support
461           Prevent some procfs errors from being silently ignored
462  Makefiles: Implement user_uninstall (Rudolf Marek)
463             Spoof LOGNAME and HOSTNAME when making html man pages
464  Module adm1025: Refine detection
465                  Update limit registers again (revert of 2.8.1)
466                  Init high limits if they read 0
467                  Fix conversions
468  Module lm75: Refine detection
469  Module lm78: Fix init
470  Module lm83: Default to kind lm83 if forced.
471               Fix temperature macros.
472  Module lm90: Add LM86, MAX6657 and MAX6658 support
473  Module lm93: New
474  Module mtp008: Fix the setting of limits on temp2
475  Module pca9540: Refine detection
476  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
477                  Support VID
478                  Fix fan_div file when fan count is less than 3
479                  Additional init and debug
480  Module smsc47m1: Fix pwm_enable being inverted
481  Module w83627hf: Add alternate VCORE/in0 calculation method
482                   Remove reset of chip by driver on initialization
483  Module w83781d: Fix default VRM for w83791d
484  Module w83l785ts: Implement read error handling (backport from 2.6)
485  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
486                    Wait for user input to continue (as opposed to 5 sec
487                    delay), can be skipped with -y
488                    Various cleanups and code refactoring
489                    Update manual pages
490  Program fancontrol.init: New (Dean Takemori)
491  Program Restore fans on many kinds of errors/interrupts
492  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
493                           (Giuseppe Della Bianca)
494  Program Detect devfs and refuse to run
495                    Use mknod's mode instead of chmod
496  Program mkpatch: Include xeontemp and pc87360
497  Program sensors: Rework adm1025 support
498                   Display pc87365/pc87366 VID
499                   Improve smsc47m1 support
500                   Hide 2.6 adm1027 alarm_mask being missing
501                   Print VRM version for all supported chips
502  Program sensors-detect: Support LM93, LM77, LM63
503                          Support PC8739x Super-I/O family (no sensors)
504                          Fix PCA9540 support
505                          Refine ADM1025/ADM1025A detection
506                          Refine LM75 detection
507                          Ignore missing /proc/modules (Andras Bali)
508                          Script-wide Perl cleanups
509                          Support udev
510                          Support W83792D, LM96000
5132.8.7 (20040611)
514  File README.thinkpad: Update 24RF08 status
515  File doc/fan-divisors: More info on accuracy
516  File doc/lm_sensors-FAQ.texi: Update 4.27
517  File doc/chips/adm1031: New
518  File doc/chips/max1619: New
519  File doc/chips/pc87360-fan: Renamed to pc87360
520  File doc/chips/pc87360: Big update
521  File doc/chips/w83781d: Update AS99127F documentation
522  File etc/ Add comments about BP6 voltages
523                            Add comment on Asus A7V8X-X VCore
524                            Misc fixes to lm80 section
525                            Update via686a section
526                            New lm99 section
527                            Add section for LM85-like chips
528                            Preliminary pc87366 section
529                            Add comment on GL520SM application modes
530                            Document beep_enable (Aurelien Jarno)
531                            Preliminary max1619 section
532                            Preliminary adm1030 and adm1031 sections
533  Library: Fix 2.6 VRM
534           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
535           Fully support the PC87360 family
536           Support the lm99
537           Add version and date strings
538           Support 2.6 max1619
539  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
540  Man page i2cdetect.8: document new command line flags
541  Man page i2cdump.8: More details on how i2cdump can write to a chip
542  Modules (all chip drivers): Rework memory allocation scheme.
543  Module adm1031: New (Alexandre d'Alton)
544  Module bmcsensors: Fix oops by creating thread for initialization
545  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
546  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
547          asb100.c, lm92.c: Use swab16
548  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
549  Module gl520sm: Less agressive initialization process
550                  Fix temp1 limits being unsettable in application
551                  Ensure that temp2 and in4 are not used at the same time
552  Module i2c-i801: Support 6300ESB and ICH6
553  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
554  Module i2c-sis645: Add support for SiS655
555  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
556  Module lm90: Support LM99 and LM89
557  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
558               Get rid of useless i2c_probe call
559  Module max1619: New (Alexey Fisher)
560  Module p4b_smbus: Add support for mobile versions of the 82801
561                    (Axel Thimm)
562  Module pc87360-fan: Renamed to pc87360
563  Module pc87360: Also support PC87365 and PC87366
564                  Add write support
565                  Correctly set the chip name depending on the type
566                  Add voltage and temperature support
567                  Fix fan speed computation
568                  Retrieve fans configuration from Super-I/O space
569                  Export pwm_enable (read-only)
570                  Honor pwm invert bits
571                  Clear fan alarms after we read them
572                  Do not read fan data when monitoring is disabled
573                  Do not include SENSORS_INSMOD stuff
574                  New module parameter: init
575                  Fan clock dividers change automatically
576                  Add thermistor dupport
577  Module smsc47m1: Lock on reads and writes
578                   Various PWM fixes
579  Module thmc50: Fix address range
580  Module via686a: Fix voltage roundings
581                  Simplify temperature conversions
582  Module w83781d: Drop PWM support for as99127f
583                  Invert AS99127F beep bits in driver rather than user-space
584  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
585  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
586  Program New
587  Program i2cdetect: Adapt probing method to address
588                     Add -q and -r flags to force probing methods
589                     Allow probing range selection
590  Program isadump: Major improvements
591  Program isaset: New
592  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
593                   module
594                   Include i2c-nforce2
595  Program sensord: New --rrd-no-average parameter
596                   Syncronize time slots with rrd
597                   Fix W83781D temp3 alarm (Aurelien Jarno)
598                   Add ASB100 support (Andrew May)
599  Program sensors: Fully support the PC87360 family
600                   Fix lm80 temperature alarms
601                   Support the lm99
602                   Do not invert AS99127F beep bits anymore
603                   Fix W83781D temp3 alarm (Aurelien Jarno)
604                   Print library version string
605  Program sensors-detect: Rework Super I/O detection
606                          Support SiS655/SiS96x
607                          Support ADT7461 and ADT7467
608                          Better support for ADM1027, ADT7460 and ADT7463
609                          Explicitly support ADM1028
610                          Scan all logical devices of PC87365 and PC87366
611                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
612                          Detect eeproms with software write protect (not
613                          enabled by default)
614                          Support ALi 1563 (2.6 only)
615                          Drop LTC1710 support
616                          Use byte reads for probing on ranges 0x30-0x37 and
617                          0x50-0x5F
618                          Improve LM89 and LM99 support
619                          Support GeForce FX 5900 video cards
620                          Fix devfs misdetection (Aurelien Jarno)
621                          Detect 6300ESB, ICH6
622                          Fix double detection of ISA chips
623                          Support MAX1619
624                          Support PC87373 Super-I/O
625                          Fix unknown adapters appearing multiple times
626                          Refine MAX6650/MAX6651 detection
6292.8.6 (20040405)
630  File README.thinkpad: Update status
631  File doc/chips/pca9540: New
632  File doc/chips/pc87360-fan: New
633  File etc/ Update pcf8591 default configuration
634  Library: Switch to new sysfs naming standard
635           Fix gcc 3.3 warnings (Philipp Thomas)
636           Support 2.6 ds1621 and pcf8591
637           Change pcf8591 magnitudes
638           Support pc87360-fan
639  Makefile: Install shared library 755
640  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
641  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
642  Modules ds1621, pcf8591: Check for capabilities before using them
643                           (Aurelien Jarno)
644  Modules pcf8574, pcf8591: Cleanups
645  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
646  Module adm1021: Better detection and initialization
647  Module pca9540: New driver for the Philips PCA9540
648  Module pc87360-fan: New driver for the National Semiconductor PC87360,
649                      PC87363 and PC87364 Super I/O chips
650  Module smsc47m1: Support the LPC47B27x
651  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
652  Program i2cdetect: Skip special addresses by default
653  Program sensord: Prevent null pointer dereference (Tim Toohey)
654  Program sensors: Print the degree symbol in the terminal's current locale
655                   (Aurelien Jarno)
656                   Update pcf8591 print to support 2.6 driver
657                   Support pc87360-fan
658  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
659                          Improved SiS chips support
660                          Add a white list of IBM systems
661                          Drop support of undetectable adapters
662                          Fix smart battery detection
663                          Add smart battery charger and manager detection
664                          Rework adm1021 and clones detection
665                          The PC87360, PC87363 and PC87364 Super I/O chips
666                          now have a (preliminary) driver
667                          Rework Super I/O detection
668                          Better support of devfs
669  Program New
6722.8.5 (20040305)
673  File doc/chips/SUMMARY: Update
674  File etc/ Epox 8K3A tweaks. (Kronos)
675  Makefiles hotplug and rrd: Remove -o and -g arguments to install
676  Module bmcsensors: Increase max SDRs to 100
677  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
678  Module i2c-amd756: Don't register driver to avoid driver conflicts.
679                     (Daniel Rune Jensen)
680  Module it87: Better temperature sensor types handling (Takeru Komoriya)
681               Fix reset=1 (Takeru Komoriya)
682  Module lm80: Code cleanups
683  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
684  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
685  Module w83627hf: Add w83637hf support
686                   Fix exported name
687                   Fix PWM in w83627thf
688                   Preserve other bits when forcing temp2/3 to comparator mode
689  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
690                  Remove asb100 support
691  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
692          Define driver ID if i2c-id.h doesn't have it yet.
693  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
694          Backport oops fix from Linux 2.6.
695  Modules (all chips): Get rid of useless headers
696  Program Add sysfs support
697  Program sensors: Add w83637hf support
698                   Add support for Shuttle Ethernet EEPROMs
699                   Drop 2.6 subclient detection
700  Program sensors-detect: Add heuristics to the LM80 detection function
701                          Add support for W83L785R, improve W83L784R/AR
702                          Add GeForce FX 5600 as supported by rivatv
703                          More Super IO chips, better handling
704  Library: Update to match renames in fscher
705           Reverse temporary changes to w83l785ts mappings
706           Fix vt1211 and vt8231 uch_config not being writable
707           Add 2.6 lm80 support
708           Add w83637hf support
709           Remove in6 and temp1 from vt1211 and vt8231
710           Add support for Shuttle Ethernet EEPROMs
711           Remove unused as99127f features
7142.8.4 (20040207)
715  File doc/lm_sensors-FAQ.texi: Update 4.20.
716  File doc/chips/it87: Change hyst to low
717  File doc/chips/w83l785ts: New
718  File etc/ Change it87 hyst to low
719                            Fix w83697hf supposed to have temp3
720                            Limits initialization for adm1025/ne1619
721                            Handle fscher voltage conversions
722                            Add Tyan Trinity S2495 KT400 setup (Eric
723                              Schumann)
724                            Fix fscher fan labels (Reinhard Nissl)
725  Library: Better 2.6 eeprom support
726           Change it87 hyst to low
727           Add 2.6 gl518sm, fscher support
728           Fix 2.6 negative voltages handling
729           Temporary fix to w83l785ts mappings
730  Module adm1025: Separate prefix for NE1619
731  Module adm1026: Remove use of temporary ID
732                  Define addresses as a range
733  Module bmcsensors: Fix reservations
734  Module fscher: Externalize voltage conversions
735  Module eeprom: Remove memtype
736  Module i2c-piix4: Fix resource release error
737                    Various cleanups
738  Program Add sysfs support
739  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
740                   Drop linux 2.2 support
741                   Add w83627hf
742  Program sensors: Do not show algorithm by default
743                   Cleanup temperature unit display code
744                   Cleanup label spacing code
745                   Fix output to UTF-8 terms (Marcel Sebek)
746                   Simplify gl518sm print
747                   Do not ignore errors in FSC chips prints
748                   Fix w83l785ts print
749                   Cleanup FSC chips prints
750  Program sensors-detect: Fix PATH issues
751                          Correctly point to the fscher driver
7542.8.3 (20040115)
755  File lm_sensors.spec: Update
756  Library: Add 2.6 eeprom, lm90 support
757           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
758  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
759  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
760  Module i2c-amd756: Fix byte writes
761  Module i2c-tsunami: Cleanups (Daniel Nilsson)
762  Module it87: Fix sg_tlx writes; fix sensor type reporting;
763               add 8712 Super I/O detection;
764               remove initialization of temp_type and fan_ctl;
765               remove init and temp_type module parameters
766  Module lm90: Handle hysteresis differently
767  Module smartbatt: Fix detection, magnitudes, temp
768  Module w83781d: Fix negative voltages
769  Module w83l785ts: New
770  Program eeprog: Make 8 bit mode the default
771  Program fancontrol: Improvements, fixes, support 2.6 kernels
772  Program mkpatch: Add lm75.h
773  Program pwmconfig: Improvements, fixes, support 2.6 kernels
774  Program sensors: Add ASB100 support
775  Program sensors-detect: Add 8712 Super I/O detection;
776                          add W83L785TS detection
7792.8.2 (20031211)
780  IMPORTANT: Limit initialization removed from all chip drivers!
781             If you didn't run 'sensors -s' in the past you may need to now!
782  File Change lm75 scaling back to 1;
783                        Add example for asb100
784  Library: Fix bmcsensors scaling, increase number of sensors;
785           Add w83627thf support; Advance version to 3.0.0;
786           Add hermes, ADM1032, ASB100 support;
787           Add it87 sensor type support;
788           Add sysfs support for kernel 2.6;
789           Fix memory leaks
790  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
791             Fail if no kernel .config file exists;
792             Don't build module dependencies for user and user_install
793  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
794          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
795          smsc47m1, thmc50, via686a, w83627hf, w83781d:
796          Remove initialization of limits by driver.
797  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
798  Modules (chip): Init cleanups
799  Module asb100: New
800  Module bmcsensors: Fix voltage scaling, voltage and fan limits
801  Modules ddcmon, eeprom: Add failure printks
802  Module fscher: New (Fujitsu-Siemens Hermes driver)
803  Module i2c-amd756: Fix AMD8111 support
804  Module i2c-amd8111: Fix byte writes
805  Module i2c-nforce2: Fix byte writes
806  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
807  Module i2c-sis630: Sync with 2.6.0-X driver version
808  Module i2c-viapro: Add support for Via 8237
809  Module it87: Add pwm and "smart guardian" support;
810               add it87 sensor type support
811  Module lm75: Fix negative voltages
812  Module lm90: Add ADM1032 support
813  Module w83781d: Fix 791d and 627hf detection
814  Module w83627hf: Add VID support
815  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
816  Program eeprog: New
817  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
818                                       support sysfs for i2c bus search
819  Program i2cdetect: Add -l option to list busses
820  Program i2cdump: Add 'c' mode for consective address reads
821  Program mkpatch: Cleanups
822  Program pwmconfig: Handle multiple fans controlled by a single pwm
823  Program sensord: Remove ddcmon support
824  Program sensors: Add ADM1032 support; add messages for sysfs
825  Program sensors-detect: Prefer Super I/O drivers;
826                          Fix W83627HF and W83791D detection; detect CSB6;
827                          Detect ADM1029, ADM1030, ADM1031;
828                          Detect W83637HF, W83697UF;
829                          Add it87 sensor type support; add sysfs support
830                          Reduce lm80 misdetects; remove PCFxxxx "detection"
831                          Detect VT8237 (KT600)
832                          Use VPD instead of DMI+ACPI for Thinkpad detection
833                          Suggest new asb100 driver instead of w83781d
8362.8.1 (20031005)
837  NOTE: Requires i2c-2.8.1 or newer!
838  File Improved adm1025 section
839                        Default temp labels for as99127f
840                        Improved lm83 section
841                        Better support for Asus A7V8X-X
842  File doc/chips/SUMMARY: Add SMSC manufacturer ID
843  File doc/chips/adm1025: Add decent documentation (almost new)
844  File doc/chips/lm83: Known motherboards list update, misc updates
845  Library: Change adm1025 names (hyst/over become low/high)
846           Swap adm1025 temp1 and temp2 to match the driver's order
847           Advance version to 2.0.1
848           Update lm83 support
849           Add support for lm90, xeontemp, max6650
850           Add separate messages for read and write errors
851           Add missing message for parse error
853  Modules (various): Fix includes for compilation on Alpha
854                     Use the new i2c_delay function instead of the various
855                     do_pause functions
856  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
857  Module i2c-nforce2: Cleanups
858  Module i2c-i810: Use readl/writel for portable access to PCI memory
859  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
860  Module i2c-savage4: Use readl/writel for portable access to PCI memory
861  Module i2c-sis630: Fix detection
862                     Add block data read/write support
863  Module i2c-sis645: Detection method change/bugfix
864  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
865  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
866  Module adm1025: Major driver update
867                  Add support for Philips NE1619
868                  Simplify the driver a lot (unified voltages, unified
869                  temperatures and much more)
870                  Fix default voltage limits
871                  Change default temperature limits
872                  Swap remote and local temperatures to match the internal
873                  registers order (make the code unification possible)
874                  Export remote diode fault through alarms
875  Module ddcmon: Major update
876                 Add half a dozen new features
877                 Add checksum parameter (same as for the eeprom module)
878                 Fix monitor limits
879  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
880  Module lm78: Fix a fan_div/fan_min bug
881  Module lm83: Add t_crit and alarms support
882  Module lm90: New
883  Module max6650: New
884  Module saa1064: New
885  Module smsc47m1: Add support for 47M142
886  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
887                   enhance w83627thf support
888  Module w83781d: Enhance chip detection; clean up error returns;
889                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
890  Module xeontemp: New
891  Program Add Direct Rambus (DRDRAM)
892                           Mark Rambus as unsupported
893  Program New
894                          Interfaces between our eeprom module and
895                          parse-edid from the read-edid project
896  Program p4b_smbus: Fix SMP compilation
897  Program sensord: Add support for IT87 (Mike Black)
898                   Change ADM1025 support to match the changes made to
899                   the library
900  Program sensors: Rewrite and enhance EEPROM support
901                   Change LM83 and ADM1025 support to match the changes
902                   made to the library
903                   Add DRDRAM support to print_eeprom
904                   Exit(1) on /proc write failure (Malte Starostik)
905                   Add LM90, MAX6650 support
906  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
907                          Add support for LM82, LM86, LM89
908                          Improved W83781D family detection
909                          Add support for AS19927F rev.2, ASB100 Bach
910                          Add support for Asus Mozart-2 (3 types)
911                          Add support for NE1619
912                          Add support for FSC Hermes
913                          Make sure /sbin is in the user's path
914                          Fix EEPROM detection
915                          Automatic module.conf and /dev/i2c* detection
916                          Improve LM82 and LM83 detection
917                          Handle "to-be-written" cleanly
918                          Add detection for 47M14x Super I/O
919                          Handle the one-address-many-chips-same-driver
920                          case
9232.8.0 (20030714)
924  NOTE: Requires i2c-2.8.0 or newer!!!
925  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
926                  2.4.13 or later required for mkpatch.
927  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
928                  i2c package
929  File doc/chips/fscscy: Add watchdog documentation
930  File Fix vt1211/vt8231 thermistor calculations
931  File sensors.h: Now automatically generated
932  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
933           add adm1026, lm83, lm85, w83791d support;
934           Advance version to 2.0.0
935  Makefiles: Generate warnings if new library won't be found by;
936             Modules now install in kernel/drivers/i2c/[busses,chips];
937             Ensure that headers in /usr/local/include are used first;
938             Don't use /usr/include headers for modules;
939             Handle multiple UTS_RELEASE definitions in linux/version.h;
940             Automatically generate kernel/include/sensors.h;
941             Remove old gzipped modules; remove old misc directory if empty;
942             Remove pre-2.4 installation method;
943             -Wall now the default;
944             Add new targets user, user_install, and help;
945             Run depmod after module installation
946  Modules (all): Cleanups including
947                - Add #include <i2c-proc.h>
948                - C99 initializers
949                - Remove #ifdef MODULE
950                - Remove #ifndef THIS_MODULE
951                - Remove #ifndef MODULE_LICENSE
952                - Remove other 2.1/2.2 #ifdefs
953                - Remove #include "sensors.h", copy SYSCTL defs to module
954                - Remove excess #includes
955                - Remove argument in i2c_register_entry()
956                - Remove dummy xxx_command() definition
957                - Remove EXPORT_NO_SYMBOLS
958                - Remove init_MUTEX #define
959                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
960                  no longer adjust their own refcounts
961                - Use module_init() and module_exit()
962                - Update to new i2c_driver struct definition
963  Modules (bus PCI): Convert to PCI-module-style initialization
964  Modules (several): Add support for AMD Opteron VRM (VID) encoding
965  Module adm1021: Set alarm on failed reads and report old value;
966                  merge changes from kernel 2.5.54
967  Module adm1026: New
968  Module bmcsensors: Fix compile when DEBUG=1
969  Modules ddcmon, eeprom: Use i2c block reads if possible;
970                          better error handling
971  Module ds1307: Add to Makefile
972  Module gl520sm: Fix temperature over/hyst writes
973  Module lm75: merge changes from kernel 2.5.54
974  Module lm83: New
975  Module lm85: New
976  Module i2c-ali1535: Check for invalid transaction
977  Module i2c-ali15x3: Check for invalid transaction
978  Module i2c-amd756: merge changes from kernel 2.5.54;
979                     check for invalid transaction
980  Module i2c-amd8111: merge changes from kernel 2.5.54
981  Module i2c-i801: Add support for 82801EB (ICH5)
982  Module i2c-i810: Fix for some chips
983  Module i2c-nforce2: New
984  Module i2c-piix4: Check for invalid transaction
985  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
986  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
987        north bridges; SiS962 and SiS963 south bridges
988  Module i2c-viapro: Check for invalid transaction
989  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
990          pwm and pwm enable support; update docs
991  Module smbus-arp: Check adapter for HW or SW PEC support;
992                    add reset option
993  Module w83781d: Add support for w83791d
994  Module w83627hf: New
995  Program Recognize DDR and Rambus
996  Program eeprom: Fix writes for small eeproms
997  Program eeprom, eepromer: Use local i2c-dev.h for build
998  Program fancontrol: New
999  Program lm_sensors.init: Call sensors -s in start()
1000  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1001                   Add adm1026,lm85 support;
1002                   Remove sensors.c file; add sensors_compat.h;
1003                   Remove patches to i2c-core.c and drivers/char/mem.c;
1004                   Now works only for kernels 2.4.13 or later
1005  Program p4b_smbus: Fix 'make install';
1006                     Install in same place as other modules;
1007                     Clear correct bits in config word
1008  Program pwmconfig: New
1009  Program sensors: add adm1026, lm85, w83791d support
1010  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1011                          w83627hf, w83627thf, w83697hf);
1012                          Add support for SiS651, SiS961, SiS745, SiS746;
1013                          Support dmidecode 2.0 and later;
1014                          Fix "C" format error;
1015                          Add support for adm1026, 82801EB (ICH5), W83791D;
1016                          Add support for w83l785ts, nForce2;
1017                          Fix UTF-8 incompatibility;
1018                          Better support for lm75;
1019                          Add support for lm83
10212.7.0 (20021208)
1022  NOTE: Requires i2c-2.7.0 or newer.
1023  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1024  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1025  File doc/busses/i2c-sis645: Add license
1026  File doc/chips/lm92: Add license, features
1027  File doc/chips/maxilife: Add license, parameters, features
1028  File doc/chips/smartbatt: Complete rewrite
1029  File doc/chips/vt8231: Add license, parameters
1030  File Add section for lm75; complete the lm78 section
1031  Library: Add support for MC1066; add multiple VRM version support for lm87;
1032           enhance adm1023 support; initial support for Sony Vaio eeprom;
1033           add support for bmcsensors; add hacks for additional dummy drivers
1034  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1035            add flags for x86_64 compiles
1036  Module adm1021: Add support for MC1066
1037  Module bmcsensors: New
1038  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1039                   kernel 2.5.43; fix 2.2 kernel compiles
1040  Module gl518sm: Iterate allowed only for rev 0x00
1041  Module i2c-amd756: Configure base address for nForce support;
1042                     check for uninitialized base address;
1043                     add support for amd8111 (SMBus 1.0)
1044  Module i2c-amd8111: New (SMBus 2.0)
1045  Module i2c-ipmb: New
1046  Module i2c-ipmi: New
1047  Module i2c-keywest: Sync with kernel 2.4.20
1048  Module i2c-sis630: Add support for SiS730
1049  Module i2c-sis645: Improve support for SiS645/961;
1050                     add support for SiS645DX/961 and SiS735;
1051                     fix 2.2 kernel compiles
1052  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1053  Module lm87: Add multiple VRM version support
1054  Module vt1211: Fix inx limits and alarms; fix in0
1055  Module vt8231: Fix inx limits and alarms; fix in0
1056  Module w83781d: Fix in0/in1 initialization
1057  Module smartbatt: New
1058  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1059  Program Code cleanup; valid HTML; better HTML output;
1060                           stop decoding on checksum error
1061  Program dmidecode: Fix read bug; upgrade to version 1.8
1062  Program doc-insmod: Complete rewrite; fix author output
1063  Program doc-features: Complete rewrite; handle missing sysctl entries;
1064                        handle unknown prefix with suggestion
1065  Program lm_sensors.init: Remove spaces bug; add green/red output
1066  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1067  Program rrd: Add sanity limits to newly-created RRD.
1068  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1069  Program sensors: Add support for MC1066, Rambus Rimms;
1070                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1071                   initial support for Sony Vaio eeprom
1072  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1073                          IPMI, AMD8111; add help if no sensors found;
1074                          add ACPI method for IBM system detection;
1075                          work with old Perl versions again;
1076                          initial support for Sony Vaio eeprom
10782.6.5 (20020915)
1079  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1080  File Fix temp[23] for as99127f; add vt8231
1081  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1082  Module dmi_scan: new
1083  Module ds1621: Fix enable/disable
1084  Module eeprom: Do not corrupt 24RF08's when checksum=1
1085  Module i2c-i801: Check for uninitialized base address;
1086                   enable if not enabled
1087  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1088  Module i2c-sis630: new
1089  Module i2c-sis645: new
1090  Module lm92: Fix in-kernel initialization
1091  Module via686a: Remove VT8231 support
1092  Module vt8231: new
1093  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1094  Program dmidecode: new
1095  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1096  Program mkpatch: Add entries for, lm92,
1097                   pcf8574, pcf8591, smsc47m1, vt1211;
1098                   add dmi_scan
1099  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1100  Program lm_sensors.init: fix stop()
1101  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1102                   add support for logging loadavg in RRD;
1103                   fix down-converting raw labels for RRD;
1104                   update chip support, still behind sensors
1105  Program sensors: Add /usr/local/etc to config file path;
1106                   fix -c and -u flags; add vt8231
1107  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1108                          refuse to run on IBM systems;
1109                          fix sysconfig module numbering;
1110                          change quick write to not corrupt 24RF08's
11122.6.4 (20020719)
1113  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1114  File doc/vid: New
1115  File include/sensors_vid.h: New
1116  File Add vt1211, smsc47m1
1117  Library: Add multiple VRM version support for adm1025, w83781d;
1118           fix 'flex scanner jammed' on some systems;
1119           add vt1211, smsc47m1, lm92;
1120           fix access mode checking
1121  Makefiles: For 2.4+ kernels, modules now install in
1122             kernel/drivers/[i2c,sensors] , not misc/ , and
1123             'make install' removes old versions in misc/ .
1124             Use $CFLAGS and $CPPFLAGS if defined.
1125  Module adm1025: Add multiple VID version support
1126  Module ds1307: new
1127  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1128                     reliability improvements
1129  Module i2c-hydra: Flush posted writes
1130  Module i2c-i801: Add support for 82801DB (ICH4)
1131  Module i2c-i810: Flush posted writes
1132  Module i2c-savage4: new
1133  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1134  Module i2c-voodoo3: Flush posted writes
1135  Module ds1307: New
1136  Module lm92: New
1137  Module smbus-arp: new
1138  Module smsc47m1: new
1139  Module via686a: Add support for VT8231 sensors
1140  Module vt1211: new
1141  Module w83781d: Add multiple VID version support; fix temp alarms
1142  Program eeprom: new
1143  Program i2cdump: Add smbus block command specification, add PEC support
1144  Program lm_sensors.init: new
1145  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1146                   pcf8574, pcf8591, smsc47m1, vt1211
1147  Program p4b_smbus: Add support for ICH4
1148  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1149  Program sensord.init: Renamed, was prog/init/sensors
1150  Program sensord: Major update, now requires rrd source;
1151                   not compiled by default
1152  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1153                   (don't display algo. and adap.) option;
1154                   add vt1211, smsc47m1, lm92
1155  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1156                          add 82801DB, LM85; fix perl warnings;
1157                          generate /etc/sysconfig/lm_sensors for
1158                          lm_sensors.init script
11602.6.3 (20020322)
1161  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1162  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1163  File doc/chips/it87: add more temp_type help
1164  File Un-ignore it87 in8, temp3, fan3;
1165                        add adm1021 section; add lm87 AIN[1,2] template;
1166                        swap negative voltage limits for 782d,783s,627hf,
1167                        697hf,it87; add more it87 help; swap neg. voltage
1168                        limits for lm78(-j), lm79, w83781d, as99127f
1169  Library: Add PCF8591, W83697HF, ADM1023 support;
1170           fix w83* fan_min computes;
1171           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1172  Module adm1024: Add MODULE_LICENSE("GPL")
1173  Module bt869: Add s-video out and DVD resolution support
1174  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1175  Module fscscy: implement min/max for voltages and fans
1176  Module i2c-amd756: Add support for AMD768
1177  Module i2c-i810: Add support for 810E
1178  Module i2c-keywest: Big update, sync with kernel 2.4.18
1179  Module i2c-piix4: Check for uninitialized base address
1180  Module i2c-sis5595: Blacklist 645, 735
1181  Module i2c-viapro: Check for uninitialized base address
1182  Module gl518sm: Standardize /proc entries in0-3
1183  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1184               fan -> fan1; fix temp2 limit writes
1185  Module pcf8574: Add support for PCF8574A; /proc interface changed
1186  Module pcf8591: new
1187  Module sis5595: Blacklist 645, 735
1188  Module w83781d: Add W83697HF support; allow force_subclients parameter
1189                  for Tyan 2460
1190  Programs, Update for new /proc names
1191  Program new
1192  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1193                   add text output
1194  Program init/sensors: New SysV init script
1195  Program Add support for fscscy, add more help entries
1196  Program p4b_smbus: new
1197  Program rrd: Install summ_week.cgi
1198  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1199                   clean up chassis intrusion prints
1200  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1201                          fix Via686a and it87 detection;
1202                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1203                          fix uninitialized values; it87 beats lm78
12052.6.2 (20011118)
1206  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1207  Chip Modules (all): malloc.h -> slab.h
1208  Modules (all): Add MODULE_LICENSE("GPL")
1209  File doc/FAQ: More updates and additions
1210  File Fix it87 in5,in6 (-12,-5) calculations
1211  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1212           update it87 alarm ID's.
1213  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1214  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1215  Module i2c-amd756: Improve busy handling/printk's
1216  Module i2c-i801: Add 82801CA/CAM support
1217  Module i2c-keywest: Sync with PPC people, it works now
1218  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1219  Module i2c-viapro: Add Via VT8233 support
1220  Module it87: Merge alarm_* /proc entries to alarms
1221  Module sis5595: Fix support for rev B0
1222  Module via686a: Make limit initializations reliable
1223  Module w83781d: Allow init=0 parameter to bypass initialization
1224  Program isadump: Add flat address space (PCI) support
1225  Program Add support for i2c-ali1535, adm1024, ds1621,
1226                      fscpos, it87, maxilife, mtp008
1227  Program sensors: Fix w83781d temp precision
1228  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1229                          Fujitsu Poseidon and Scylla,
1230                          Intel 82443MX and 82801CA/CAM detection,
1231                          add ITE 8172G detection (driver in kernel 2.4.10)
12332.6.1 (20010830)
1234  File BUGS: Updated
1235  File doc/FAQ: More updates and additions
1236  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1237  File Fix/enhance it87 section
1238  Library: ds1621 and it87 updates
1239  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1240  Module i2c-amd756: Add AMD 766 support
1241  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1242  Module i2c-piix4: Add Serverworks CSB5 support
1243  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1244  Module adm1025: Fixed temp2 min/max writes
1245  Module ds1621: Add 12-bit precision mode
1246  Module it87: Enable all alarms, add in8 support, add sensor type selection
1247  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1248                  remove support for module
1249  Module sis5595: Recognize unsupported chips and refuse to load
1250  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1251  Program eepromer: new
1252  Program Fix dependencies on i2c-proc; disallow compilation
1253                      of sensors.c as a module in kernel
1254  Program sensors: it87 updates; adjust temp. precision for some chips
1255  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1256                          recognize unsupported SiS chips;
1257                          recognize AMD 766 and Serverworks CSB5.
12592.6.0 (20010612)
1260  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1261        If your make fails because it can't find <linux/i2c-proc.h>, you
1262        forgot this step!!!
1263  File doc/FAQ: Many, many updates and additions
1264  File doc/busses/i2c-sis5595: new
1265  File doc/busses/i2c-tsunami: new
1266  File doc/chips/it87: new
1267  File doc/chips/via686a: Claim support for 686b.
1268  File README.thinkpad: new
1269  File Adjust as99127f in5 (-12V) and temp2 calculations;
1270                        Add lm87, adm9240, ds1780, lm81 templates;
1271                        Enhance help comments in file;
1272                        Add Tyan S2510 dual-MTP008 example;
1273                        Make separate sis5595 section.
1274  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1275  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1276  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1277           Add support for maxilife-nba and amd1024;
1278           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1279  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1280  Chip Modules (all): Change from sensors_* to i2c_* globals
1281                      for new i2c-proc.[ch]
1282  Makefiles: enhance to support Alpha architecture
1283  Module adm1021: Fix lm84 and gl523sm support
1284  Module adm1024: new
1285  Module i2c-i801: Chip detection cleanup
1286  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1287  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1288  Module i2c-tsunami: New
1289  Module i2c-via: Ensure i2c bus is tristated correctly.
1290  Module it87: new driver for IT8705, IT8712, Sis950 chips
1291  Module lm78: Recognize chipid=0x20
1292  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1293  Module mtp008: Fix temp initializations;
1294                 Save BIOS pin configuration of temps and fans;
1295                 Fix sensor type reads/writes and fan min writes;
1296                 Fix spurious invalid sensor type messages
1297  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1298                  used for patched kernel now.
1299                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1300  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1301                  Allow force_addr=0xaddr
1302  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1303  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1304                  reading changes; Add messages for subclient
1305                  registration failure
1306  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1307  Program i2cset: new
1308  Program isadump: fix for Alpha arch. compiles
1309  Program Fix adm9240 typos; Add more chips to;
1310                      Remove ltc1710; Fix i2c_sis5595 typo;
1311                      Support kernel 2.4.5 makefile change;
1312                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1313  Program sens_update_rrd: new
1314  Program sensord: Add -d (debug) and -p (pid-file) options
1315  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1316                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1317                   Change mtp008 temps from max/min to limit/hyst;
1318                   Add maxilife-nba, adm1024, it87 support.
1319  Program sensors-detect: Recognize lm78 with chipid=0x20;
1320                          Recognize SMSC Victory66 South Bridge;
1321                          Add devfs /dev/i2c/x support;
1322                          Add adm1024, it87xx support; Add thinkpad warning.
1323  Program tellerstats: new
13252.5.5 (20010115)
1326  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1327        you have kernel 2.4.0-prerelease or greater.
1328  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1329  File doc/developers/proc: new
1330  File Add mtp008 entries, adm1025 entries
1331  Library: Add ds1621, mtp008 support
1332  Module adm1021: Add support for adm1021a / adm1023
1333  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1334  Module adm1025: Add support for remote temp; rename /proc entries to
1335                  in[0-5] and temp[1-2]; fix negative temp readings
1336  Module adm9240: Rename /proc entries to in[0-5]
1337  Module ddcmon: allow force and force_ddcmon parameters
1338  Module ds1621: new
1339  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1340  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1341  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1342  Module lm87: cleanup, update voltage calculations
1343  Module mtp008: new
1344  Module pcf8574: change update time to 5 seconds
1345  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1346  Module w83781d: fix beep setting via /proc
1347  Programs editticket, readticket: new
1348  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
1349  Program more fixes; now adds many more modules
1350  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1351                   add adm1025 temp2; report temp limits correctly as
1352                   min/max or limit/hysteresis; print message if no
1353                   sensors are found. Removed false errors from lm87 reads.
1354  Program sensors-detect: Add ds1621, mtp008 detection;
1355                          add ServerWorks detection
13572.5.4 (20001012)
1358  Module i2c-viapro: Add support for Via 596B (0x3051)
1359  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1360  Program fixed infinite loop
1361  Program sensors-detect: Detect Via 596B (0x3051)
13632.5.3 (20001008)
1364  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1365  File useful_addresses.html: update
1366  Library: Add lm87 support
1367  Module pcf8574: new
1368  Module i2c-ali1535: new
1369  Module i2c-ali15x3: removed force #ifdef.
1370  Module i2c-i801: support Intel 82801BA (815E chipset)
1371  Module i2c-i801: add i2c block write support, fix smbus block bugs
1372                   (requires i2c 2.5.3 package)
1373  Module i2c-i810: support Intel 82815
1374  Module lm87: new
1375  Module sensors: Fix for kernel 2.4.0-test8
1376                  (remove copy_to_user_ret and put_user_ret)
1377  Module w83781d: limit fan divisors to 8 max. for as99127f
1378  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1379  Program i2cdump: Add smbus block read support
1380  Programs i2cdetect, i2cdump: Improve error reporting
1381  Program sensors: new switch -u (--unknown)
1382  Program sensors-detect: detect Intel 82801BA (815E chipset)
1383  Program sensors-detect: detect Intel 82815
1384  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1385  Program sensors-detect: detect National LM87
1386  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1387  Program sensors-detect: Improve error reporting
13892.5.2 (20000709)
1390  File Fix lm80 in8 calculation
1391  Module w83781d: W83783S no longer crashes on unloading
1392  Program sensors-detect: more robustness in case of unknown i2c adapters
1393  Program sensors-detect, libsensors: fix eeprom size reporting
1394  Program sensord: more flexibility, support for alarm scanning etc.
1395  Program sensors: support for ignore setting on sensor alarms.
1396  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
13982.5.1 (20000618)
1399  Library: Add adm1025 support
1400  Module adm1025: new
1401  Module ddcmon: Fixed bus scan which could hang SMBus
1402  Module i2c-keywest: new
1403  Module maxilife: Add support for Maxilife '99 (NBA)
1404  Module via686a: Enable sensors if not enabled by BIOS
1405  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1406  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1407  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1408  Module w83781d: Fis as99127f fan speed (was 66% too high)
1409  Module w83781d: Improve beep input checking
1410  Program i2cdump: Add Winbond-style bank selection
1411  Program isadump: Add Winbond-style bank selection
1412  Program sensors: Add adm1025 support.
1413  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1414  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1415  File Add Maxilife '99 entries
1416  File Remove some as99127f entries.
1417    Note: For as99127f, reinstall manually (make install
1418          won't reinstall it) or else 'sensors -s' will fail.
14202.5.0 (20000312)
1421  Dropped all kernel 2.0 and 2.1 compatibility
1422  Module i2c-i810: new
1423  Module ddcmon: new
1424  Module via686a: new
1425  Module i2c-amd756: fixed region request
1426  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1427  Module w83781d: Don't change pin settings at initialization;
1428                  also fix chip detection.
1429  Library: Support for ddcmon and via686a
1430  Program sensors-detect: Support for ddcmon and via686a
1431  Program sensors: Support for eeprom, ddcmon and via686a
14332.4.5 (20000116)
1434  Introduced DESTDIR installation prefix
1435  Module lm80: fixes, temperature now read and set correctly
1436  Module i2c-voodoo3: driver enhancements
1437  Module w83781d: fixes, AS99127 works much better now
1438  Library: New ignore keyword in config file
1439  Programs: Support for new ignore keyword
1440  Program sensors-detect: Support for MGA detections
14422.4.4 (19991201)
1443  Addition of the alpha release of AMD 756 SMBus host support.
1444  Many fixes and updates to the gl518sm driver
1445  Updates and fixes for device detection
14472.4.0 (19990920)
1448  Too much to list.
1449  i2c and smbus parts are split off to a separate i2c package.
1450  New drivers and other stuff.
14522.3.4 (19990616)
1453  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1454  All: Now compiles against kernel 2.0.x (again ;)
1455  Module gl518sm: some updates and refinements
14572.3.3 (19990603)
1458  All: Now compiles against kernel 2.3.x (x >= 1)
1459  Module i2c-voodoo3: Timing issue fixes
1460  Module bt869: Seems to be functional and relatively well tested
1461  Many modules were modified to be more compatible with the new
1462   Mutex structure in the new experimental kernels.
14642.3.2 (19990507)
1465  Module i2c-hydra: Now compiles on 2.0.x kernels
1466  Module i2c-lm75: Slightly better detection
1467  * New, but not compiled by default:
1468  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1469  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
14712.3.1 (19990501)
1472  All: Now compiles on PPC
1473  Module i2c-hydra: NEW
1474  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1475  Module w83781d: Removed deadlock (mutex was not initialized)
1476  Documentation: A few glitches removed
1477  Makefile: default module installation directory is now
1478            /lib/modules/current/extra/misc
1479  Program sensors-detect: PPC Hydra now detected
1480  Program sensors: Now prints complete GL518SM information
1481  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
14832.3.0 (19990422)
1484  All: Many, many changes and improvements
1485  All: Many small bugs and problems removed
1486  Modules: New insmod parameters
1487  Modules: Much improved chip detection
1488  Module maxilife: NEW
1489  Module adm1021: MAX1617A now also supported
1490  Module adm9240: DS1780 now also supported
1491  Module w83781d: W83782D and W83783S now also supported
1492  Program sensors-detect: NEW
1493  Library: All chips now supported
1494  Documentation: Very much improved
14962.2.2 (199903??)
1497  Just some minor updates and bug fixes.
14992.2.1 (19990218)
1500  All: Removed compile warnings
1501  Module i2c-dev: Small bug removed if DEBUG=1 was used
1502  Module sis5595: Now compiles for 2.0 kernels
1503  Module adm1021: Detection corrected
15052.2.0 (19990216)
1506  All: Set copyrights to include 1999
1507  All: Small bugfixes
1508  I2C: Upgraded to newest archive of Simon Vogl
1509  Module i2c-dev: NEW
1510  Module i2c-ali15x3: NEW
1511  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1512     directories, and somewhat improved
1513  Module sis5595: NEW
1514  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1515  Library: Support for new chip drivers, several small bugs fixed
1516  Library manual pages: NEW
1517  Program i2cdetect: Moved to detect directory
1518  Program NEW
1519  Program doc-features: NEW
1520  Program sensors: Added man-page
1521  Document BUGS: Added cdrom bug and kernel i2c conflict
15232.1.2 (19990116)
1524  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1525  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1526  Documentation in doc/kernel: NEW
15282.1.1 (19990107)
1529  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1530                     and older
1531  Module gl518sm.o: Miscelaneous bugs and problems solved
1532  Program isadump: NEW
15342.1.0 (19981230)
1535  Library: Completely NEW
1536  Program sensors: NEW
1537  Program grab_busses: NEW
1538  Program decode-dimms: More information
1539  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1540  Module w83781d.o: NEW
1541  Module lm80.o: NEW
1542  Module gl518sm.o: new procfile beep, several small updates
1543  Modules: Now use pin readings, no more scaling within the kernel (use the
1544           library instead)
15462.0.2 (19981214)
1547  Module eeprom.o: NEW
1548  Program decode-dimms: NEW
1549  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1550           2.1.58
1551  Modules: Somewhat less verbose on transfers
1552  Module lm78.o now recognizes and handles lm78-j and lm79
15542.0.1 (1998121?)
1555  Module gl518sm.o updates, to make it actually work
1556  Module lm75.o high/low-byte swapping write bug fixed
15582.0.0 (19981209)
1559  Initial release
Note: See TracBrowser for help on using the browser.