root/lm-sensors/trunk/CHANGES @ 1013

Revision 1013, 11.0 KB (checked in by mds, 15 years ago)

recognize SMSC Victory66 south bridge.

No driver support yet. Looks identical to piix4 so we can
add to i2c-piix4.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
3This is a list of the most important changes in 2.x versions. It is by
4no means complete, listing only user-visible changes which are interesting.
5The ultimate way to know what has changed is to run diff, or even neater,
6ask CVS about it:
8  * Checkout the archive (see doc/cvs for how you can do this)
9  * Determine which tags are valid, by running this command from the
10    project root directory:
11      cvs status -v -l Makefile
12    Valid tags are usually like form V2-1-0 for version 2.1.0
13  * Ask cvs for the difference between two versions:
14      cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS
15    for example:
16      cvs diff -r V2-0-0 -r V2-0-1 -u
202.6.0 (2001????)
21  File doc/FAQ: Updates
22  File doc/chips/via686a: Claim support for 686b.
23  File Adjust as99127f -12V calculation
24  Module i2c-i801: Chip detection cleanup
25  Module lm78: Recognize chipid=0x20
26  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
27  Module sensors: Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
28  Module via686a: Allow force=9191,address (for A7V/K7V boards)
29  Program Fix adm9240 typos
30  Program sensors: Change reported version from 1.3 to the lm_sensors version.
31  Program sensors-detect: Recognize lm78 with chipid=0x20
32  Program sensors-detect: Recognize SMSC Victory66 South Bridge
342.5.5 (20010115)
35  NOTE: i2c 2.5.5 MUST BE be compiled and installed first, UNLESS
36        you have kernel 2.4.0-prerelease or greater.
37  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
38  File doc/developers/proc: new
39  File Add mtp008 entries, adm1025 entries
40  Library: Add ds1621, mtp008 support
41  Module adm1021: Add support for adm1021a / adm1023
42  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
43  Module adm1025: Add support for remote temp; rename /proc entries to
44                  in[0-5] and temp[1-2]; fix negative temp readings
45  Module adm9240: Rename /proc entries to in[0-5]
46  Module ddcmon: allow force and force_ddcmon parameters
47  Module ds1621: new
48  Module i2c-ali1535: Enhance error checking and recovery; add mutex
49  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
50  Module i2c-piix4: add support for ServerWorks southbridge OSB4
51  Module lm87: cleanup, update voltage calculations
52  Module mtp008: new
53  Module pcf8574: change update time to 5 seconds
54  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
55  Module w83781d: fix beep setting via /proc
56  Programs editticket, readticket: new
57  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
58  Program more fixes; now adds many more modules
59  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
60                   add adm1025 temp2; report temp limits correctly as
61                   min/max or limit/hysteresis; print message if no
62                   sensors are found. Removed false errors from lm87 reads.
63  Program sensors-detect: Add ds1621, mtp008 detection;
64                          add ServerWorks detection
662.5.4 (20001012)
67  Module i2c-viapro: Add support for Via 596B (0x3051)
68  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
69  Program fixed infinite loop
70  Program sensors-detect: Detect Via 596B (0x3051)
722.5.3 (20001008)
73  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
74  File useful_addresses.html: update
75  Library: Add lm87 support
76  Module pcf8574: new
77  Module i2c-ali1535: new
78  Module i2c-ali15x3: removed force #ifdef.
79  Module i2c-i801: support Intel 82801BA (815E chipset)
80  Module i2c-i801: add i2c block write support, fix smbus block bugs
81                   (requires i2c 2.5.3 package)
82  Module i2c-i810: support Intel 82815
83  Module lm87: new
84  Module sensors: Fix for kernel 2.4.0-test8
85                  (remove copy_to_user_ret and put_user_ret)
86  Module w83781d: limit fan divisors to 8 max. for as99127f
87  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
88  Program i2cdump: Add smbus block read support
89  Programs i2cdetect, i2cdump: Improve error reporting
90  Program sensors: new switch -u (--unknown)
91  Program sensors-detect: detect Intel 82801BA (815E chipset)
92  Program sensors-detect: detect Intel 82815
93  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
94  Program sensors-detect: detect National LM87
95  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
96  Program sensors-detect: Improve error reporting
982.5.2 (20000709)
99  File Fix lm80 in8 calculation
100  Module w83781d: W83783S no longer crashes on unloading
101  Program sensors-detect: more robustness in case of unknown i2c adapters
102  Program sensors-detect, libsensors: fix eeprom size reporting
103  Program sensord: more flexility, support for alarm scanning etc.
104  Program sensors: support for ignore setting on sensor alarms.
105  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1072.5.1 (20000618)
108  Library: Add adm1025 support
109  Module adm1025: new
110  Module ddcmon: Fixed bus scan which could hang SMBus
111  Module i2c-keywest: new
112  Module maxilife: Add support for Maxilife '99 (NBA)
113  Module via686a: Enable sensors if not enabled by BIOS
114  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
115  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
116  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
117  Module w83781d: Fis as99127f fan speed (was 66% too high)
118  Module w83781d: Improve beep input checking
119  Program i2cdump: Add Winbond-style bank selection
120  Program isadump: Add Winbond-style bank selection
121  Program sensors: Add adm1025 support.
122  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
123  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
124  File Add Maxilife '99 entries
125  File Remove some as99127f entries.
126    Note: For as99127f, reinstall manually (make install
127          won't reinstall it) or else 'sensors -s' will fail.
1292.5.0 (20000312)
130  Dropped all kernel 2.0 and 2.1 compatibility
131  Module i2c-i810: new
132  Module ddcmon: new
133  Module via686a: new
134  Module i2c-amd756: fixed region request
135  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
136  Module w83781d: Don't change pin settings at initialization;
137                  also fix chip detection.
138  Library: Support for ddcmon and via686a
139  Program sensors-detect: Support for ddcmon and via686a
140  Program sensors: Support for eeprom, ddcmon and via686a
1422.4.5 (20000116)
143  Introduced DESTDIR installation prefix
144  Module lm80: fixes, temperature now read and set correctly
145  Module i2c-voodoo3: driver enhancements
146  Module w83781d: fixes, AS99127 works much better now
147  Library: New ignore keyword in config file
148  Programs: Support for new ignore keyword
149  Program sensors-detect: Support for MGA detections
1512.4.4 (19991201)
152  Addition of the alpha release of AMD 756 SMBus host support.
153  Many fixes and updates to the gl518sm driver
154  Updates and fixes for device detection
1562.4.0 (19990920)
157  Too much to list.
158  i2c and smbus parts are split off to a separate i2c package.
159  New drivers and other stuff.
1612.3.4 (19990616)
162  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
163  All: Now compiles against kernel 2.0.x (again ;)
164  Module gl518sm: some updates and refinements
1662.3.3 (19990603)
167  All: Now compiles against kernel 2.3.x (x >= 1)
168  Module i2c-voodoo3: Timing issue fixes
169  Module bt869: Seems to be functional and relatively well tested
170  Many modules were modified to be more compatible with the new
171   Mutex structure in the new experimental kernels.
1732.3.2 (19990507)
174  Module i2c-hydra: Now compiles on 2.0.x kernels
175  Module i2c-lm75: Slightly better detection
176  * New, but not compiled by default:
177  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
178  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1802.3.1 (19990501)
181  All: Now compiles on PPC
182  Module i2c-hydra: NEW
183  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
184  Module w83781d: Removed deadlock (mutex was not initialized)
185  Documentation: A few glitches removed
186  Makefile: default module installation directory is now
187            /lib/modules/current/extra/misc
188  Program sensors-detect: PPC Hydra now detected
189  Program sensors: Now prints complete GL518SM information
190  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1922.3.0 (19990422)
193  All: Many, many changes and improvements
194  All: Many small bugs and problems removed
195  Modules: New insmod parameters
196  Modules: Much improved chip detection
197  Module maxilife: NEW
198  Module adm1021: MAX1617A now also supported
199  Module adm9024: DS1780 now also supported
200  Module w83781d: W83782D and W83783S now also supported
201  Program sensors-detect: NEW
202  Library: All chips now supported
203  Documentation: Very much improved
2052.2.2 (199903??)
206  Just some minor updates and bug fixes.
2082.2.1 (19990218)
209  All: Removed compile warnings
210  Module i2c-dev: Small bug removed if DEBUG=1 was used
211  Module sis5595: Now compiles for 2.0 kernels
212  Module adm1021: Detection corrected
2142.2.0 (19990216)
215  All: Set copyrights to include 1999
216  All: Small bugfixes
217  I2C: Upgraded to newest archive of Simon Vogl
218  Module i2c-dev: NEW
219  Module i2c-ali15x3: NEW
220  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
221     directories, and somewhat improved
222  Module sis5595: NEW
223  Modules: Renamed all bus modules to i2c-*, new directory lay-out
224  Library: Support for new chip drivers, several small bugs fixed
225  Library manual pages: NEW
226  Program i2cdetect: Moved to detect directory
227  Program NEW
228  Program doc-features: NEW
229  Program sensors: Added man-page
230  Document BUGS: Added cdrom bug and kernel i2c conflict
2322.1.2 (19990116)
233  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
234  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
235  Documentation in doc/kernel: NEW
2372.1.1 (19990107)
238  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
239                     and older
240  Module gl518sm.o: Miscelaneous bugs and problems solved
241  Program isadump: NEW
2432.1.0 (19981230)
244  Library: Completely NEW
245  Program sensors: NEW
246  Program grab_busses: NEW
247  Program decode-dimms: More information
248  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
249  Module w83781d.o: NEW
250  Module lm80.o: NEW
251  Module gl518sm.o: new procfile beep, several small updates
252  Modules: Now use pin readings, no more scaling within the kernel (use the
253           library instead)
2552.0.2 (19981214)
256  Module eeprom.o: NEW
257  Program decode-dimms: NEW
258  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
259           2.1.58
260  Modules: Somewhat less verbose on transfers
261  Module lm78.o now recognizes and handles lm78-j and lm79
2622.0.1 (1998121?)
263  Module gl518sm.o updates, to make it actually work
264  Module lm75.o high/low-byte swapping write bug fixed
2652.0.0 (19981209)
266  Initial release
Note: See TracBrowser for help on using the browser.