root/lm-sensors/trunk/CHANGES @ 1054

Revision 1054, 12.5 KB (checked in by mds, 14 years ago)

add devfs /dev/i2c/x support

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
3This is a list of the most important changes in 2.x versions. It is by
4no means complete, listing only user-visible changes which are interesting.
5The ultimate way to know what has changed is to run diff, or even neater,
6ask CVS about it:
8  * Checkout the archive (see doc/cvs for how you can do this)
9  * Determine which tags are valid, by running this command from the
10    project root directory:
11      cvs status -v -l Makefile
12    Valid tags are usually like form V2-1-0 for version 2.1.0
13  * Ask cvs for the difference between two versions:
14      cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS
15    for example:
16      cvs diff -r V2-0-0 -r V2-0-1 -u
202.6.0 (2001????)
21  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
22        If your make fails because it can't find <linux/i2c-proc.h>, you
23        forgot this step!!!
24        Also, mkpatch is probably broken right now.
25  File doc/FAQ: Many updates and additions
26  File doc/chips/via686a: Claim support for 686b.
27  File README.thinkpad: new
28  File Adjust as99127f in5 (-12V) and temp2 calculations;
29                        Add lm87, adm9240, ds1780, lm81 templates;
30                        Enhance help comments in file;
31                        Add Tyan S2510 dual-MTP008 example.
32  File sensors.c: Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
33  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
34  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
35  Library: Fix/standardize some lm87 and mtp008 entries
36  Chip Modules (all ISA): Remove #include "i2c-isa.h"
37  Module i2c-i801: Chip detection cleanup
38  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
39  Module lm78: Recognize chipid=0x20
40  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
41  Module mtp008: Fix temp initializations;
42                 Save BIOS pin configuration of temps and fans
43  Module sensors: Disabled, moved to i2c package as i2c-proc.c
44  Module via686a: Allow force=9191,address (for A7V/K7V boards)
45  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
46                  reading changes
47  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
48  Program Fix adm9240 typos, add more chips to,
49                      remove ltc1710
50  Program sens_update_rrd: new
51  Program sensord: Add -d (debug) and -p (pid-file) options
52  Program sensors: Change reported version from 1.3 to the lm_sensors version;
53                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
54                   Change mtp008 temps from max/min to limit/hyst.
55  Program sensors-detect: Recognize lm78 with chipid=0x20;
56                          Recognize SMSC Victory66 South Bridge;
57                          Add devfs /dev/i2c/x support
58  Program tellerstats: new
602.5.5 (20010115)
61  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
62        you have kernel 2.4.0-prerelease or greater.
63  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
64  File doc/developers/proc: new
65  File Add mtp008 entries, adm1025 entries
66  Library: Add ds1621, mtp008 support
67  Module adm1021: Add support for adm1021a / adm1023
68  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
69  Module adm1025: Add support for remote temp; rename /proc entries to
70                  in[0-5] and temp[1-2]; fix negative temp readings
71  Module adm9240: Rename /proc entries to in[0-5]
72  Module ddcmon: allow force and force_ddcmon parameters
73  Module ds1621: new
74  Module i2c-ali1535: Enhance error checking and recovery; add mutex
75  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
76  Module i2c-piix4: add support for ServerWorks southbridge OSB4
77  Module lm87: cleanup, update voltage calculations
78  Module mtp008: new
79  Module pcf8574: change update time to 5 seconds
80  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
81  Module w83781d: fix beep setting via /proc
82  Programs editticket, readticket: new
83  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
84  Program more fixes; now adds many more modules
85  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
86                   add adm1025 temp2; report temp limits correctly as
87                   min/max or limit/hysteresis; print message if no
88                   sensors are found. Removed false errors from lm87 reads.
89  Program sensors-detect: Add ds1621, mtp008 detection;
90                          add ServerWorks detection
922.5.4 (20001012)
93  Module i2c-viapro: Add support for Via 596B (0x3051)
94  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
95  Program fixed infinite loop
96  Program sensors-detect: Detect Via 596B (0x3051)
982.5.3 (20001008)
99  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
100  File useful_addresses.html: update
101  Library: Add lm87 support
102  Module pcf8574: new
103  Module i2c-ali1535: new
104  Module i2c-ali15x3: removed force #ifdef.
105  Module i2c-i801: support Intel 82801BA (815E chipset)
106  Module i2c-i801: add i2c block write support, fix smbus block bugs
107                   (requires i2c 2.5.3 package)
108  Module i2c-i810: support Intel 82815
109  Module lm87: new
110  Module sensors: Fix for kernel 2.4.0-test8
111                  (remove copy_to_user_ret and put_user_ret)
112  Module w83781d: limit fan divisors to 8 max. for as99127f
113  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
114  Program i2cdump: Add smbus block read support
115  Programs i2cdetect, i2cdump: Improve error reporting
116  Program sensors: new switch -u (--unknown)
117  Program sensors-detect: detect Intel 82801BA (815E chipset)
118  Program sensors-detect: detect Intel 82815
119  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
120  Program sensors-detect: detect National LM87
121  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
122  Program sensors-detect: Improve error reporting
1242.5.2 (20000709)
125  File Fix lm80 in8 calculation
126  Module w83781d: W83783S no longer crashes on unloading
127  Program sensors-detect: more robustness in case of unknown i2c adapters
128  Program sensors-detect, libsensors: fix eeprom size reporting
129  Program sensord: more flexibility, support for alarm scanning etc.
130  Program sensors: support for ignore setting on sensor alarms.
131  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1332.5.1 (20000618)
134  Library: Add adm1025 support
135  Module adm1025: new
136  Module ddcmon: Fixed bus scan which could hang SMBus
137  Module i2c-keywest: new
138  Module maxilife: Add support for Maxilife '99 (NBA)
139  Module via686a: Enable sensors if not enabled by BIOS
140  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
141  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
142  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
143  Module w83781d: Fis as99127f fan speed (was 66% too high)
144  Module w83781d: Improve beep input checking
145  Program i2cdump: Add Winbond-style bank selection
146  Program isadump: Add Winbond-style bank selection
147  Program sensors: Add adm1025 support.
148  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
149  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
150  File Add Maxilife '99 entries
151  File Remove some as99127f entries.
152    Note: For as99127f, reinstall manually (make install
153          won't reinstall it) or else 'sensors -s' will fail.
1552.5.0 (20000312)
156  Dropped all kernel 2.0 and 2.1 compatibility
157  Module i2c-i810: new
158  Module ddcmon: new
159  Module via686a: new
160  Module i2c-amd756: fixed region request
161  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
162  Module w83781d: Don't change pin settings at initialization;
163                  also fix chip detection.
164  Library: Support for ddcmon and via686a
165  Program sensors-detect: Support for ddcmon and via686a
166  Program sensors: Support for eeprom, ddcmon and via686a
1682.4.5 (20000116)
169  Introduced DESTDIR installation prefix
170  Module lm80: fixes, temperature now read and set correctly
171  Module i2c-voodoo3: driver enhancements
172  Module w83781d: fixes, AS99127 works much better now
173  Library: New ignore keyword in config file
174  Programs: Support for new ignore keyword
175  Program sensors-detect: Support for MGA detections
1772.4.4 (19991201)
178  Addition of the alpha release of AMD 756 SMBus host support.
179  Many fixes and updates to the gl518sm driver
180  Updates and fixes for device detection
1822.4.0 (19990920)
183  Too much to list.
184  i2c and smbus parts are split off to a separate i2c package.
185  New drivers and other stuff.
1872.3.4 (19990616)
188  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
189  All: Now compiles against kernel 2.0.x (again ;)
190  Module gl518sm: some updates and refinements
1922.3.3 (19990603)
193  All: Now compiles against kernel 2.3.x (x >= 1)
194  Module i2c-voodoo3: Timing issue fixes
195  Module bt869: Seems to be functional and relatively well tested
196  Many modules were modified to be more compatible with the new
197   Mutex structure in the new experimental kernels.
1992.3.2 (19990507)
200  Module i2c-hydra: Now compiles on 2.0.x kernels
201  Module i2c-lm75: Slightly better detection
202  * New, but not compiled by default:
203  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
204  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
2062.3.1 (19990501)
207  All: Now compiles on PPC
208  Module i2c-hydra: NEW
209  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
210  Module w83781d: Removed deadlock (mutex was not initialized)
211  Documentation: A few glitches removed
212  Makefile: default module installation directory is now
213            /lib/modules/current/extra/misc
214  Program sensors-detect: PPC Hydra now detected
215  Program sensors: Now prints complete GL518SM information
216  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
2182.3.0 (19990422)
219  All: Many, many changes and improvements
220  All: Many small bugs and problems removed
221  Modules: New insmod parameters
222  Modules: Much improved chip detection
223  Module maxilife: NEW
224  Module adm1021: MAX1617A now also supported
225  Module adm9024: DS1780 now also supported
226  Module w83781d: W83782D and W83783S now also supported
227  Program sensors-detect: NEW
228  Library: All chips now supported
229  Documentation: Very much improved
2312.2.2 (199903??)
232  Just some minor updates and bug fixes.
2342.2.1 (19990218)
235  All: Removed compile warnings
236  Module i2c-dev: Small bug removed if DEBUG=1 was used
237  Module sis5595: Now compiles for 2.0 kernels
238  Module adm1021: Detection corrected
2402.2.0 (19990216)
241  All: Set copyrights to include 1999
242  All: Small bugfixes
243  I2C: Upgraded to newest archive of Simon Vogl
244  Module i2c-dev: NEW
245  Module i2c-ali15x3: NEW
246  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
247     directories, and somewhat improved
248  Module sis5595: NEW
249  Modules: Renamed all bus modules to i2c-*, new directory lay-out
250  Library: Support for new chip drivers, several small bugs fixed
251  Library manual pages: NEW
252  Program i2cdetect: Moved to detect directory
253  Program NEW
254  Program doc-features: NEW
255  Program sensors: Added man-page
256  Document BUGS: Added cdrom bug and kernel i2c conflict
2582.1.2 (19990116)
259  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
260  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
261  Documentation in doc/kernel: NEW
2632.1.1 (19990107)
264  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
265                     and older
266  Module gl518sm.o: Miscelaneous bugs and problems solved
267  Program isadump: NEW
2692.1.0 (19981230)
270  Library: Completely NEW
271  Program sensors: NEW
272  Program grab_busses: NEW
273  Program decode-dimms: More information
274  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
275  Module w83781d.o: NEW
276  Module lm80.o: NEW
277  Module gl518sm.o: new procfile beep, several small updates
278  Modules: Now use pin readings, no more scaling within the kernel (use the
279           library instead)
2812.0.2 (19981214)
282  Module eeprom.o: NEW
283  Program decode-dimms: NEW
284  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
285           2.1.58
286  Modules: Somewhat less verbose on transfers
287  Module lm78.o now recognizes and handles lm78-j and lm79
2892.0.1 (1998121?)
290  Module gl518sm.o updates, to make it actually work
291  Module lm75.o high/low-byte swapping write bug fixed
2932.0.0 (19981209)
294  Initial release
Note: See TracBrowser for help on using the browser.