root/lm-sensors/trunk/CHANGES @ 1520

Revision 1520, 22.6 KB (checked in by mmh, 12 years ago)

added notes/mentions SiS645

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3This is a list of the most important changes in 2.x versions. It is by
4no means complete, listing only the most significant changes.
5The ultimate way to know what has changed is to run diff, or even neater,
6ask CVS about it:
7
8  * Checkout the archive (see doc/cvs for how you can do this)
9  * Determine which tags are valid, by running this command from the
10    project root directory:
11      cvs status -v -l Makefile
12    Valid tags are usually of the form V2-1-0 for version 2.1.0
13  * Ask cvs for the difference between two versions:
14      cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS
15    for example:
16      cvs diff -r V2-0-0 -r V2-0-1 -u
17
18-----------------------------------------------------------------------------
19
202.6.5 (2002????)
21  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
22  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
23  Library: Fix fan3_div writes for w8378* and it87; add vt8231
24  Module dmi_scan: new
25  Module ds1621: Fix enable/disable
26  Module i2c-i801: Check for uninitialized base address;
27                   enable if not enabled
28  Module i2c-piix4: Refuse to load on IBM systems
29  Module i2c-sis630: new
30  Module i2c-sis645: new
31  Module lm92: Fix in-kernel initialization
32  Module via686a: Remove VT8231 support
33  Module vt8231: new
34  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
35  Program dmidecode: new
36  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
37  Program mkpatch: Add Config.in entries for, lm92,
38                   pcf8574, pcf8591, smsc47m1, vt1211;
39                   add dmi_scan
40  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
41  Program lm_sensors.init: fix stop()
42  Program sensord: Add /usr/local/etc to config file path;
43                   add support for logging loadavg in RRD;
44                   fix down-converting raw labels for RRD;
45                   update chip support, still behind sensors
46  Program sensors: Add /usr/local/etc to config file path;
47                   fix -c and -u flags; add vt8231
48  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
49                          refuse to run on IBM systems;
50                          fix sysconfig module numbering;
51                          change quick write to not corrupt 24RF08's
52
532.6.4 (20020719)
54  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
55  File doc/vid: New
56  File include/sensors_vid.h: New
57  File sensors.conf.eg: Add vt1211, smsc47m1
58  Library: Add multiple VRM version support for adm1025, w83781d;
59           fix 'flex scanner jammed' on some systems;
60           add vt1211, smsc47m1, lm92;
61           fix access mode checking
62  Makefiles: For 2.4+ kernels, modules now install in
63             kernel/drivers/[i2c,sensors] , not misc/ , and
64             'make install' removes old versions in misc/ .
65             Use $CFLAGS and $CPPFLAGS if defined.
66  Module adm1025: Add multiple VID version support
67  Module ds1307: new
68  Module i2c-amd756: Add nVidia nForce support; fix block read length;
69                     reliability improvements
70  Module i2c-hydra: Flush posted writes
71  Module i2c-i801: Add support for 82801DB (ICH4)
72  Module i2c-i810: Flush posted writes
73  Module i2c-savage4: new
74  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
75  Module i2c-voodoo3: Flush posted writes
76  Module ds1307: New
77  Module lm92: New
78  Module smbus-arp: new
79  Module smsc47m1: new
80  Module via686a: Add support for VT8231 sensors
81  Module vt1211: new
82  Module w83781d: Add multiple VID version support; fix temp alarms
83  Program eeprom: new
84  Program i2cdump: Add smbus block command specification, add PEC support
85  Program lm_sensors.init: new
86  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
87                   pcf8574, pcf8591, smsc47m1, vt1211
88  Program p4b_smbus: Add support for ICH4
89  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
90  Program sensord.init: Renamed, was prog/init/sensors
91  Program sensord: Major update, now requires rrd source;
92                   not compiled by default
93  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
94                   (don't display algo. and adap.) option;
95                   add vt1211, smsc47m1, lm92
96  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
97                          add 82801DB, LM85; fix perl warnings;
98                          generate /etc/sysconfig/lm_sensors for
99                          lm_sensors.init script
100
1012.6.3 (20020322)
102  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
103  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
104  File doc/chips/it87: add more temp_type help
105  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
106                        add adm1021 section; add lm87 AIN[1,2] template;
107                        swap negative voltage limits for 782d,783s,627hf,
108                        697hf,it87; add more it87 help; swap neg. voltage
109                        limits for lm78(-j), lm79, w83781d, as99127f
110  Library: Add PCF8591, W83697HF, ADM1023 support;
111           fix w83* fan_min computes;
112           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
113  Module adm1024: Add MODULE_LICENSE("GPL")
114  Module bt869: Add s-video out and DVD resolution support
115  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
116  Module fscscy: implement min/max for voltages and fans
117  Module i2c-amd756: Add support for AMD768
118  Module i2c-i810: Add support for 810E
119  Module i2c-keywest: Big update, sync with kernel 2.4.18
120  Module i2c-piix4: Check for uninitialized base address
121  Module i2c-sis5595: Blacklist 645, 735
122  Module i2c-viapro: Check for uninitialized base address
123  Module gl518sm: Standardize /proc entries in0-3
124  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
125               fan -> fan1; fix temp2 limit writes
126  Module pcf8574: Add support for PCF8574A; /proc interface changed
127  Module pcf8591: new
128  Module sis5595: Blacklist 645, 735
129  Module w83781d: Add W83697HF support; allow force_subclients parameter
130                  for Tyan 2460
131  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
132  Program decode-vaio.pl: new
133  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
134                   add text output
135  Program init/sensors: New SysV init script
136  Program mkpatch.pl: Add support for fscscy, add more help entries
137  Program p4b_smbus: new
138  Program rrd: Install summ_week.cgi
139  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
140                   clean up chassis intrusion prints
141  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
142                          fix Via686a and it87 detection;
143                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
144                          fix uninitialized values; it87 beats lm78
145
1462.6.2 (20011118)
147  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
148  Chip Modules (all): malloc.h -> slab.h
149  Modules (all): Add MODULE_LICENSE("GPL")
150  File doc/FAQ: More updates and additions
151  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
152  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
153           update it87 alarm ID's.
154  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
155  Module fscscy: new (Fujitsu-Siemens Scylla driver)
156  Module i2c-amd756: Improve busy handling/printk's
157  Module i2c-i801: Add 82801CA/CAM support
158  Module i2c-keywest: Sync with PPC people, it works now
159  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
160  Module i2c-viapro: Add Via VT8233 support
161  Module it87: Merge alarm_* /proc entries to alarms
162  Module sis5595: Fix support for rev B0
163  Module via686a: Make limit initializations reliable
164  Module w83781d: Allow init=0 parameter to bypass initialization
165  Program isadump: Add flat address space (PCI) support
166  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
167                      fscpos, it87, maxilife, mtp008
168  Program sensors: Fix w83781d temp precision
169  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
170                          Fujitsu Poseidon and Scylla, 
171                          Intel 82443MX and 82801CA/CAM detection,                     
172                          add ITE 8172G detection (driver in kernel 2.4.10)
173
1742.6.1 (20010830)
175  File BUGS: Updated
176  File doc/FAQ: More updates and additions
177  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
178  File sensors.conf.eg: Fix/enhance it87 section
179  Library: ds1621 and it87 updates
180  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
181  Module i2c-amd756: Add AMD 766 support
182  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
183  Module i2c-piix4: Add Serverworks CSB5 support
184  Module i2c-sis5595: Recognize unsupported chips and refuse to load
185  Module adm1025: Fixed temp2 min/max writes
186  Module ds1621: Add 12-bit precision mode
187  Module it87: Enable all alarms, add in8 support, add sensor type selection
188  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
189                  remove support for module
190  Module sis5595: Recognize unsupported chips and refuse to load
191  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
192  Program eepromer: new
193  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
194                      of sensors.c as a module in kernel
195  Program sensors: it87 updates; adjust temp. precision for some chips
196  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
197                          recognize unsupported SiS chips;
198                          recognize AMD 766 and Serverworks CSB5.
199
2002.6.0 (20010612)
201  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
202        If your make fails because it can't find <linux/i2c-proc.h>, you
203        forgot this step!!!
204  File doc/FAQ: Many, many updates and additions
205  File doc/busses/i2c-sis5595: new
206  File doc/busses/i2c-tsunami: new
207  File doc/chips/it87: new
208  File doc/chips/via686a: Claim support for 686b.
209  File README.thinkpad: new
210  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
211                        Add lm87, adm9240, ds1780, lm81 templates;
212                        Enhance help comments in file;
213                        Add Tyan S2510 dual-MTP008 example;
214                        Make separate sis5595 section.
215  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
216  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
217  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
218           Add support for maxilife-nba and amd1024;
219           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
220  Chip Modules (all ISA): Remove #include "i2c-isa.h"
221  Chip Modules (all): Change from sensors_* to i2c_* globals
222                      for new i2c-proc.[ch]
223  Makefiles: enhance to support Alpha architecture
224  Module adm1021: Fix lm84 and gl523sm support
225  Module adm1024: new
226  Module i2c-i801: Chip detection cleanup
227  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
228  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
229  Module i2c-tsunami: New
230  Module i2c-via: Ensure i2c bus is tristated correctly.
231  Module it87: new driver for IT8705, IT8712, Sis950 chips
232  Module lm78: Recognize chipid=0x20
233  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
234  Module mtp008: Fix temp initializations;
235                 Save BIOS pin configuration of temps and fans;
236                 Fix sensor type reads/writes and fan min writes;
237                 Fix spurious invalid sensor type messages
238  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
239                  used for patched kernel now.
240                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
241  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
242                  Allow force_addr=0xaddr
243  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
244  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
245                  reading changes; Add messages for subclient
246                  registration failure
247  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
248  Program i2cset: new
249  Program isadump: fix for Alpha arch. compiles
250  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
251                      Remove ltc1710; Fix i2c_sis5595 typo;
252                      Support kernel 2.4.5 makefile change;
253                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
254  Program sens_update_rrd: new
255  Program sensord: Add -d (debug) and -p (pid-file) options
256  Program sensors: Change reported version from 1.3 to the lm_sensors version;
257                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
258                   Change mtp008 temps from max/min to limit/hyst;
259                   Add maxilife-nba, adm1024, it87 support.
260  Program sensors-detect: Recognize lm78 with chipid=0x20;
261                          Recognize SMSC Victory66 South Bridge;
262                          Add devfs /dev/i2c/x support;
263                          Add adm1024, it87xx support; Add thinkpad warning.
264  Program tellerstats: new
265
2662.5.5 (20010115)
267  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
268        you have kernel 2.4.0-prerelease or greater.
269  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
270  File doc/developers/proc: new
271  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
272  Library: Add ds1621, mtp008 support
273  Module adm1021: Add support for adm1021a / adm1023
274  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
275  Module adm1025: Add support for remote temp; rename /proc entries to
276                  in[0-5] and temp[1-2]; fix negative temp readings
277  Module adm9240: Rename /proc entries to in[0-5]
278  Module ddcmon: allow force and force_ddcmon parameters
279  Module ds1621: new
280  Module i2c-ali1535: Enhance error checking and recovery; add mutex
281  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
282  Module i2c-piix4: add support for ServerWorks southbridge OSB4
283  Module lm87: cleanup, update voltage calculations
284  Module mtp008: new
285  Module pcf8574: change update time to 5 seconds
286  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
287  Module w83781d: fix beep setting via /proc
288  Programs editticket, readticket: new
289  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
290  Program mkpatch.pl: more fixes; now adds many more modules
291  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
292                   add adm1025 temp2; report temp limits correctly as
293                   min/max or limit/hysteresis; print message if no
294                   sensors are found. Removed false errors from lm87 reads.
295  Program sensors-detect: Add ds1621, mtp008 detection;
296                          add ServerWorks detection
297
2982.5.4 (20001012)
299  Module i2c-viapro: Add support for Via 596B (0x3051)
300  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
301  Program mkpatch.pl: fixed infinite loop
302  Program sensors-detect: Detect Via 596B (0x3051)
303
3042.5.3 (20001008)
305  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
306  File useful_addresses.html: update
307  Library: Add lm87 support
308  Module pcf8574: new
309  Module i2c-ali1535: new
310  Module i2c-ali15x3: removed force #ifdef.
311  Module i2c-i801: support Intel 82801BA (815E chipset)
312  Module i2c-i801: add i2c block write support, fix smbus block bugs
313                   (requires i2c 2.5.3 package)
314  Module i2c-i810: support Intel 82815
315  Module lm87: new
316  Module sensors: Fix for kernel 2.4.0-test8
317                  (remove copy_to_user_ret and put_user_ret)
318  Module w83781d: limit fan divisors to 8 max. for as99127f
319  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
320  Program i2cdump: Add smbus block read support
321  Programs i2cdetect, i2cdump: Improve error reporting
322  Program sensors: new switch -u (--unknown)
323  Program sensors-detect: detect Intel 82801BA (815E chipset)
324  Program sensors-detect: detect Intel 82815
325  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
326  Program sensors-detect: detect National LM87
327  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
328  Program sensors-detect: Improve error reporting
329
3302.5.2 (20000709)
331  File sensors.conf.eg: Fix lm80 in8 calculation
332  Module w83781d: W83783S no longer crashes on unloading
333  Program sensors-detect: more robustness in case of unknown i2c adapters
334  Program sensors-detect, libsensors: fix eeprom size reporting
335  Program sensord: more flexibility, support for alarm scanning etc.
336  Program sensors: support for ignore setting on sensor alarms.
337  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
338
3392.5.1 (20000618)
340  Library: Add adm1025 support
341  Module adm1025: new
342  Module ddcmon: Fixed bus scan which could hang SMBus
343  Module i2c-keywest: new
344  Module maxilife: Add support for Maxilife '99 (NBA)
345  Module via686a: Enable sensors if not enabled by BIOS
346  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
347  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
348  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
349  Module w83781d: Fis as99127f fan speed (was 66% too high)
350  Module w83781d: Improve beep input checking
351  Program i2cdump: Add Winbond-style bank selection
352  Program isadump: Add Winbond-style bank selection
353  Program sensors: Add adm1025 support.
354  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
355  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
356  File sensors.conf.eg: Add Maxilife '99 entries
357  File sensors.conf.eg: Remove some as99127f entries.
358    Note: For as99127f, reinstall sensors.conf.eg manually (make install
359          won't reinstall it) or else 'sensors -s' will fail.
360
3612.5.0 (20000312)
362  Dropped all kernel 2.0 and 2.1 compatibility
363  Module i2c-i810: new
364  Module ddcmon: new
365  Module via686a: new
366  Module i2c-amd756: fixed region request
367  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
368  Module w83781d: Don't change pin settings at initialization;
369                  also fix chip detection.
370  Library: Support for ddcmon and via686a
371  Program sensors-detect: Support for ddcmon and via686a
372  Program sensors: Support for eeprom, ddcmon and via686a
373
3742.4.5 (20000116)
375  Introduced DESTDIR installation prefix
376  Module lm80: fixes, temperature now read and set correctly
377  Module i2c-voodoo3: driver enhancements
378  Module w83781d: fixes, AS99127 works much better now
379  Library: New ignore keyword in config file
380  Programs: Support for new ignore keyword
381  Program sensors-detect: Support for MGA detections
382
3832.4.4 (19991201)
384  Addition of the alpha release of AMD 756 SMBus host support.
385  Many fixes and updates to the gl518sm driver
386  Updates and fixes for device detection
387
3882.4.0 (19990920)
389  Too much to list.
390  i2c and smbus parts are split off to a separate i2c package.
391  New drivers and other stuff.
392
3932.3.4 (19990616)
394  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
395  All: Now compiles against kernel 2.0.x (again ;)
396  Module gl518sm: some updates and refinements
397
3982.3.3 (19990603)
399  All: Now compiles against kernel 2.3.x (x >= 1)
400  Module i2c-voodoo3: Timing issue fixes
401  Module bt869: Seems to be functional and relatively well tested
402  Many modules were modified to be more compatible with the new
403   Mutex structure in the new experimental kernels.
404
4052.3.2 (19990507)
406  Module i2c-hydra: Now compiles on 2.0.x kernels
407  Module i2c-lm75: Slightly better detection
408  * New, but not compiled by default:
409  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
410  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
411
4122.3.1 (19990501)
413  All: Now compiles on PPC
414  Module i2c-hydra: NEW
415  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
416  Module w83781d: Removed deadlock (mutex was not initialized)
417  Documentation: A few glitches removed
418  Makefile: default module installation directory is now
419            /lib/modules/current/extra/misc
420  Program sensors-detect: PPC Hydra now detected
421  Program sensors: Now prints complete GL518SM information
422  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
423
4242.3.0 (19990422)
425  All: Many, many changes and improvements
426  All: Many small bugs and problems removed
427  Modules: New insmod parameters
428  Modules: Much improved chip detection
429  Module maxilife: NEW
430  Module adm1021: MAX1617A now also supported
431  Module adm9240: DS1780 now also supported
432  Module w83781d: W83782D and W83783S now also supported
433  Program sensors-detect: NEW
434  Library: All chips now supported
435  Documentation: Very much improved
436
4372.2.2 (199903??)
438  Just some minor updates and bug fixes.
439
4402.2.1 (19990218)
441  All: Removed compile warnings
442  Module i2c-dev: Small bug removed if DEBUG=1 was used
443  Module sis5595: Now compiles for 2.0 kernels
444  Module adm1021: Detection corrected
445 
4462.2.0 (19990216)
447  All: Set copyrights to include 1999
448  All: Small bugfixes
449  I2C: Upgraded to newest archive of Simon Vogl
450  Module i2c-dev: NEW
451  Module i2c-ali15x3: NEW
452  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
453     directories, and somewhat improved
454  Module sis5595: NEW
455  Modules: Renamed all bus modules to i2c-*, new directory lay-out
456  Library: Support for new chip drivers, several small bugs fixed
457  Library manual pages: NEW
458  Program i2cdetect: Moved to detect directory
459  Program detect.pl: NEW
460  Program doc-features: NEW
461  Program sensors: Added man-page
462  Document BUGS: Added cdrom bug and kernel i2c conflict
463 
4642.1.2 (19990116)
465  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
466  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
467  Documentation in doc/kernel: NEW
468
4692.1.1 (19990107)
470  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
471                     and older
472  Module gl518sm.o: Miscelaneous bugs and problems solved
473  Program isadump: NEW
474
4752.1.0 (19981230)
476  Library: Completely NEW
477  Program sensors: NEW
478  Program grab_busses: NEW
479  Program decode-dimms: More information
480  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
481  Module w83781d.o: NEW
482  Module lm80.o: NEW
483  Module gl518sm.o: new procfile beep, several small updates
484  Modules: Now use pin readings, no more scaling within the kernel (use the
485           library instead)
486 
4872.0.2 (19981214)
488  Module eeprom.o: NEW
489  Program decode-dimms: NEW
490  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
491           2.1.58
492  Modules: Somewhat less verbose on transfers
493  Module lm78.o now recognizes and handles lm78-j and lm79
494
4952.0.1 (1998121?)
496  Module gl518sm.o updates, to make it actually work
497  Module lm75.o high/low-byte swapping write bug fixed
498
4992.0.0 (19981209)
500  Initial release
Note: See TracBrowser for help on using the browser.