root/lm-sensors/trunk/CHANGES @ 1584

Revision 1584, 24.5 KB (checked in by khali, 11 years ago)

Documentation fixes and updates for ALI busses

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3This is a list of the most important changes in 2.x versions. It is by
4no means complete, listing only the most significant changes.
5The ultimate way to know what has changed is to run diff, or even neater,
6ask CVS about it:
7
8  * Checkout the archive (see doc/cvs for how you can do this)
9  * Determine which tags are valid, by running this command from the
10    project root directory:
11      cvs status -v -l Makefile
12    Valid tags are usually of the form V2-1-0 for version 2.1.0
13  * Ask cvs for the difference between two versions:
14      cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS
15    for example:
16      cvs diff -r V2-0-0 -r V2-0-1 -u
17
18-----------------------------------------------------------------------------
19
202.6.6 (2002????)
21  NOTE: Requires i2c-2.6.6 or newer.
22  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
23  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
24  File doc/busses/i2c-sis645: Add license
25  File doc/chips/lm92: Add license, features
26  File doc/chips/maxilife: Add license, parameters, features
27  File doc/chips/smartbatt: Complete rewrite
28  File doc/chips/vt8231: Add license, parameters
29  Library: Add support for MC1066; add multiple VRM version support for lm87;
30           enhance adm1023 support
31  Makefile: Take kernel source location from /lib/modules/x.x.x/build
32  Module adm1021: Add support for MC1066
33  Module dmi_scan: Rename symbol duplicated in kernel; Apply fixes from
34                   kernel 2.5.43
35  Module gl518sm: Iterate allowed only for rev 0x00
36  Module i2c-amd756: Configure base address for nForce support;
37                     check for uninitialized base address
38  Module i2c-sis630: Add support for SiS730
39  Module i2c-sis645: Improve support for SiS645/961;
40                     add support for SiS645DX/961 and SiS735
41  Module i2c-viapro: VT8233A (new ID 0x3177)
42  Module lm87: Add multiple VRM version support
43  Module w83781d: Fix in0/in1 initialization
44  Module smartbatt: New
45  Program dmidecode: Fix read bug; upgrade to version 1.8
46  Program doc-insmod: Complete rewrite; fix author output
47  Program doc-features: Complete rewrite; handle missing sysctl entries;
48                        handle unknown prefix with suggestion
49  Program lm_sensors.init: Remove spaces bug; add green/red output
50  Program mkpatch: Fix dmi_scan module compile
51  Program sensors: Add support for MC1066, Rambus Rimms;
52                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition
53  Program sensors-detect: Add support for MC1066, smart battery
54  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
55
562.6.5 (20020915)
57  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
58  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
59  Library: Fix fan3_div writes for w8378* and it87; add vt8231
60  Module dmi_scan: new
61  Module ds1621: Fix enable/disable
62  Module eeprom: Do not corrupt 24RF08's when checksum=1
63  Module i2c-i801: Check for uninitialized base address;
64                   enable if not enabled
65  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
66  Module i2c-sis630: new
67  Module i2c-sis645: new
68  Module lm92: Fix in-kernel initialization
69  Module via686a: Remove VT8231 support
70  Module vt8231: new
71  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
72  Program dmidecode: new
73  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
74  Program mkpatch: Add Config.in entries for, lm92,
75                   pcf8574, pcf8591, smsc47m1, vt1211;
76                   add dmi_scan
77  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
78  Program lm_sensors.init: fix stop()
79  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
80                   add support for logging loadavg in RRD;
81                   fix down-converting raw labels for RRD;
82                   update chip support, still behind sensors
83  Program sensors: Add /usr/local/etc to config file path;
84                   fix -c and -u flags; add vt8231
85  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
86                          refuse to run on IBM systems;
87                          fix sysconfig module numbering;
88                          change quick write to not corrupt 24RF08's
89
902.6.4 (20020719)
91  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
92  File doc/vid: New
93  File include/sensors_vid.h: New
94  File sensors.conf.eg: Add vt1211, smsc47m1
95  Library: Add multiple VRM version support for adm1025, w83781d;
96           fix 'flex scanner jammed' on some systems;
97           add vt1211, smsc47m1, lm92;
98           fix access mode checking
99  Makefiles: For 2.4+ kernels, modules now install in
100             kernel/drivers/[i2c,sensors] , not misc/ , and
101             'make install' removes old versions in misc/ .
102             Use $CFLAGS and $CPPFLAGS if defined.
103  Module adm1025: Add multiple VID version support
104  Module ds1307: new
105  Module i2c-amd756: Add nVidia nForce support; fix block read length;
106                     reliability improvements
107  Module i2c-hydra: Flush posted writes
108  Module i2c-i801: Add support for 82801DB (ICH4)
109  Module i2c-i810: Flush posted writes
110  Module i2c-savage4: new
111  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
112  Module i2c-voodoo3: Flush posted writes
113  Module ds1307: New
114  Module lm92: New
115  Module smbus-arp: new
116  Module smsc47m1: new
117  Module via686a: Add support for VT8231 sensors
118  Module vt1211: new
119  Module w83781d: Add multiple VID version support; fix temp alarms
120  Program eeprom: new
121  Program i2cdump: Add smbus block command specification, add PEC support
122  Program lm_sensors.init: new
123  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
124                   pcf8574, pcf8591, smsc47m1, vt1211
125  Program p4b_smbus: Add support for ICH4
126  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
127  Program sensord.init: Renamed, was prog/init/sensors
128  Program sensord: Major update, now requires rrd source;
129                   not compiled by default
130  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
131                   (don't display algo. and adap.) option;
132                   add vt1211, smsc47m1, lm92
133  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
134                          add 82801DB, LM85; fix perl warnings;
135                          generate /etc/sysconfig/lm_sensors for
136                          lm_sensors.init script
137
1382.6.3 (20020322)
139  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
140  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
141  File doc/chips/it87: add more temp_type help
142  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
143                        add adm1021 section; add lm87 AIN[1,2] template;
144                        swap negative voltage limits for 782d,783s,627hf,
145                        697hf,it87; add more it87 help; swap neg. voltage
146                        limits for lm78(-j), lm79, w83781d, as99127f
147  Library: Add PCF8591, W83697HF, ADM1023 support;
148           fix w83* fan_min computes;
149           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
150  Module adm1024: Add MODULE_LICENSE("GPL")
151  Module bt869: Add s-video out and DVD resolution support
152  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
153  Module fscscy: implement min/max for voltages and fans
154  Module i2c-amd756: Add support for AMD768
155  Module i2c-i810: Add support for 810E
156  Module i2c-keywest: Big update, sync with kernel 2.4.18
157  Module i2c-piix4: Check for uninitialized base address
158  Module i2c-sis5595: Blacklist 645, 735
159  Module i2c-viapro: Check for uninitialized base address
160  Module gl518sm: Standardize /proc entries in0-3
161  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
162               fan -> fan1; fix temp2 limit writes
163  Module pcf8574: Add support for PCF8574A; /proc interface changed
164  Module pcf8591: new
165  Module sis5595: Blacklist 645, 735
166  Module w83781d: Add W83697HF support; allow force_subclients parameter
167                  for Tyan 2460
168  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
169  Program decode-vaio.pl: new
170  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
171                   add text output
172  Program init/sensors: New SysV init script
173  Program mkpatch.pl: Add support for fscscy, add more help entries
174  Program p4b_smbus: new
175  Program rrd: Install summ_week.cgi
176  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
177                   clean up chassis intrusion prints
178  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
179                          fix Via686a and it87 detection;
180                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
181                          fix uninitialized values; it87 beats lm78
182
1832.6.2 (20011118)
184  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
185  Chip Modules (all): malloc.h -> slab.h
186  Modules (all): Add MODULE_LICENSE("GPL")
187  File doc/FAQ: More updates and additions
188  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
189  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
190           update it87 alarm ID's.
191  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
192  Module fscscy: new (Fujitsu-Siemens Scylla driver)
193  Module i2c-amd756: Improve busy handling/printk's
194  Module i2c-i801: Add 82801CA/CAM support
195  Module i2c-keywest: Sync with PPC people, it works now
196  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
197  Module i2c-viapro: Add Via VT8233 support
198  Module it87: Merge alarm_* /proc entries to alarms
199  Module sis5595: Fix support for rev B0
200  Module via686a: Make limit initializations reliable
201  Module w83781d: Allow init=0 parameter to bypass initialization
202  Program isadump: Add flat address space (PCI) support
203  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
204                      fscpos, it87, maxilife, mtp008
205  Program sensors: Fix w83781d temp precision
206  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
207                          Fujitsu Poseidon and Scylla, 
208                          Intel 82443MX and 82801CA/CAM detection,                     
209                          add ITE 8172G detection (driver in kernel 2.4.10)
210
2112.6.1 (20010830)
212  File BUGS: Updated
213  File doc/FAQ: More updates and additions
214  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
215  File sensors.conf.eg: Fix/enhance it87 section
216  Library: ds1621 and it87 updates
217  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
218  Module i2c-amd756: Add AMD 766 support
219  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
220  Module i2c-piix4: Add Serverworks CSB5 support
221  Module i2c-sis5595: Recognize unsupported chips and refuse to load
222  Module adm1025: Fixed temp2 min/max writes
223  Module ds1621: Add 12-bit precision mode
224  Module it87: Enable all alarms, add in8 support, add sensor type selection
225  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
226                  remove support for module
227  Module sis5595: Recognize unsupported chips and refuse to load
228  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
229  Program eepromer: new
230  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
231                      of sensors.c as a module in kernel
232  Program sensors: it87 updates; adjust temp. precision for some chips
233  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
234                          recognize unsupported SiS chips;
235                          recognize AMD 766 and Serverworks CSB5.
236
2372.6.0 (20010612)
238  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
239        If your make fails because it can't find <linux/i2c-proc.h>, you
240        forgot this step!!!
241  File doc/FAQ: Many, many updates and additions
242  File doc/busses/i2c-sis5595: new
243  File doc/busses/i2c-tsunami: new
244  File doc/chips/it87: new
245  File doc/chips/via686a: Claim support for 686b.
246  File README.thinkpad: new
247  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
248                        Add lm87, adm9240, ds1780, lm81 templates;
249                        Enhance help comments in file;
250                        Add Tyan S2510 dual-MTP008 example;
251                        Make separate sis5595 section.
252  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
253  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
254  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
255           Add support for maxilife-nba and amd1024;
256           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
257  Chip Modules (all ISA): Remove #include "i2c-isa.h"
258  Chip Modules (all): Change from sensors_* to i2c_* globals
259                      for new i2c-proc.[ch]
260  Makefiles: enhance to support Alpha architecture
261  Module adm1021: Fix lm84 and gl523sm support
262  Module adm1024: new
263  Module i2c-i801: Chip detection cleanup
264  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
265  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
266  Module i2c-tsunami: New
267  Module i2c-via: Ensure i2c bus is tristated correctly.
268  Module it87: new driver for IT8705, IT8712, Sis950 chips
269  Module lm78: Recognize chipid=0x20
270  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
271  Module mtp008: Fix temp initializations;
272                 Save BIOS pin configuration of temps and fans;
273                 Fix sensor type reads/writes and fan min writes;
274                 Fix spurious invalid sensor type messages
275  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
276                  used for patched kernel now.
277                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
278  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
279                  Allow force_addr=0xaddr
280  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
281  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
282                  reading changes; Add messages for subclient
283                  registration failure
284  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
285  Program i2cset: new
286  Program isadump: fix for Alpha arch. compiles
287  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
288                      Remove ltc1710; Fix i2c_sis5595 typo;
289                      Support kernel 2.4.5 makefile change;
290                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
291  Program sens_update_rrd: new
292  Program sensord: Add -d (debug) and -p (pid-file) options
293  Program sensors: Change reported version from 1.3 to the lm_sensors version;
294                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
295                   Change mtp008 temps from max/min to limit/hyst;
296                   Add maxilife-nba, adm1024, it87 support.
297  Program sensors-detect: Recognize lm78 with chipid=0x20;
298                          Recognize SMSC Victory66 South Bridge;
299                          Add devfs /dev/i2c/x support;
300                          Add adm1024, it87xx support; Add thinkpad warning.
301  Program tellerstats: new
302
3032.5.5 (20010115)
304  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
305        you have kernel 2.4.0-prerelease or greater.
306  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
307  File doc/developers/proc: new
308  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
309  Library: Add ds1621, mtp008 support
310  Module adm1021: Add support for adm1021a / adm1023
311  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
312  Module adm1025: Add support for remote temp; rename /proc entries to
313                  in[0-5] and temp[1-2]; fix negative temp readings
314  Module adm9240: Rename /proc entries to in[0-5]
315  Module ddcmon: allow force and force_ddcmon parameters
316  Module ds1621: new
317  Module i2c-ali1535: Enhance error checking and recovery; add mutex
318  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
319  Module i2c-piix4: add support for ServerWorks southbridge OSB4
320  Module lm87: cleanup, update voltage calculations
321  Module mtp008: new
322  Module pcf8574: change update time to 5 seconds
323  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
324  Module w83781d: fix beep setting via /proc
325  Programs editticket, readticket: new
326  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
327  Program mkpatch.pl: more fixes; now adds many more modules
328  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
329                   add adm1025 temp2; report temp limits correctly as
330                   min/max or limit/hysteresis; print message if no
331                   sensors are found. Removed false errors from lm87 reads.
332  Program sensors-detect: Add ds1621, mtp008 detection;
333                          add ServerWorks detection
334
3352.5.4 (20001012)
336  Module i2c-viapro: Add support for Via 596B (0x3051)
337  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
338  Program mkpatch.pl: fixed infinite loop
339  Program sensors-detect: Detect Via 596B (0x3051)
340
3412.5.3 (20001008)
342  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
343  File useful_addresses.html: update
344  Library: Add lm87 support
345  Module pcf8574: new
346  Module i2c-ali1535: new
347  Module i2c-ali15x3: removed force #ifdef.
348  Module i2c-i801: support Intel 82801BA (815E chipset)
349  Module i2c-i801: add i2c block write support, fix smbus block bugs
350                   (requires i2c 2.5.3 package)
351  Module i2c-i810: support Intel 82815
352  Module lm87: new
353  Module sensors: Fix for kernel 2.4.0-test8
354                  (remove copy_to_user_ret and put_user_ret)
355  Module w83781d: limit fan divisors to 8 max. for as99127f
356  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
357  Program i2cdump: Add smbus block read support
358  Programs i2cdetect, i2cdump: Improve error reporting
359  Program sensors: new switch -u (--unknown)
360  Program sensors-detect: detect Intel 82801BA (815E chipset)
361  Program sensors-detect: detect Intel 82815
362  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
363  Program sensors-detect: detect National LM87
364  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
365  Program sensors-detect: Improve error reporting
366
3672.5.2 (20000709)
368  File sensors.conf.eg: Fix lm80 in8 calculation
369  Module w83781d: W83783S no longer crashes on unloading
370  Program sensors-detect: more robustness in case of unknown i2c adapters
371  Program sensors-detect, libsensors: fix eeprom size reporting
372  Program sensord: more flexibility, support for alarm scanning etc.
373  Program sensors: support for ignore setting on sensor alarms.
374  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
375
3762.5.1 (20000618)
377  Library: Add adm1025 support
378  Module adm1025: new
379  Module ddcmon: Fixed bus scan which could hang SMBus
380  Module i2c-keywest: new
381  Module maxilife: Add support for Maxilife '99 (NBA)
382  Module via686a: Enable sensors if not enabled by BIOS
383  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
384  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
385  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
386  Module w83781d: Fis as99127f fan speed (was 66% too high)
387  Module w83781d: Improve beep input checking
388  Program i2cdump: Add Winbond-style bank selection
389  Program isadump: Add Winbond-style bank selection
390  Program sensors: Add adm1025 support.
391  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
392  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
393  File sensors.conf.eg: Add Maxilife '99 entries
394  File sensors.conf.eg: Remove some as99127f entries.
395    Note: For as99127f, reinstall sensors.conf.eg manually (make install
396          won't reinstall it) or else 'sensors -s' will fail.
397
3982.5.0 (20000312)
399  Dropped all kernel 2.0 and 2.1 compatibility
400  Module i2c-i810: new
401  Module ddcmon: new
402  Module via686a: new
403  Module i2c-amd756: fixed region request
404  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
405  Module w83781d: Don't change pin settings at initialization;
406                  also fix chip detection.
407  Library: Support for ddcmon and via686a
408  Program sensors-detect: Support for ddcmon and via686a
409  Program sensors: Support for eeprom, ddcmon and via686a
410
4112.4.5 (20000116)
412  Introduced DESTDIR installation prefix
413  Module lm80: fixes, temperature now read and set correctly
414  Module i2c-voodoo3: driver enhancements
415  Module w83781d: fixes, AS99127 works much better now
416  Library: New ignore keyword in config file
417  Programs: Support for new ignore keyword
418  Program sensors-detect: Support for MGA detections
419
4202.4.4 (19991201)
421  Addition of the alpha release of AMD 756 SMBus host support.
422  Many fixes and updates to the gl518sm driver
423  Updates and fixes for device detection
424
4252.4.0 (19990920)
426  Too much to list.
427  i2c and smbus parts are split off to a separate i2c package.
428  New drivers and other stuff.
429
4302.3.4 (19990616)
431  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
432  All: Now compiles against kernel 2.0.x (again ;)
433  Module gl518sm: some updates and refinements
434
4352.3.3 (19990603)
436  All: Now compiles against kernel 2.3.x (x >= 1)
437  Module i2c-voodoo3: Timing issue fixes
438  Module bt869: Seems to be functional and relatively well tested
439  Many modules were modified to be more compatible with the new
440   Mutex structure in the new experimental kernels.
441
4422.3.2 (19990507)
443  Module i2c-hydra: Now compiles on 2.0.x kernels
444  Module i2c-lm75: Slightly better detection
445  * New, but not compiled by default:
446  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
447  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
448
4492.3.1 (19990501)
450  All: Now compiles on PPC
451  Module i2c-hydra: NEW
452  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
453  Module w83781d: Removed deadlock (mutex was not initialized)
454  Documentation: A few glitches removed
455  Makefile: default module installation directory is now
456            /lib/modules/current/extra/misc
457  Program sensors-detect: PPC Hydra now detected
458  Program sensors: Now prints complete GL518SM information
459  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
460
4612.3.0 (19990422)
462  All: Many, many changes and improvements
463  All: Many small bugs and problems removed
464  Modules: New insmod parameters
465  Modules: Much improved chip detection
466  Module maxilife: NEW
467  Module adm1021: MAX1617A now also supported
468  Module adm9240: DS1780 now also supported
469  Module w83781d: W83782D and W83783S now also supported
470  Program sensors-detect: NEW
471  Library: All chips now supported
472  Documentation: Very much improved
473
4742.2.2 (199903??)
475  Just some minor updates and bug fixes.
476
4772.2.1 (19990218)
478  All: Removed compile warnings
479  Module i2c-dev: Small bug removed if DEBUG=1 was used
480  Module sis5595: Now compiles for 2.0 kernels
481  Module adm1021: Detection corrected
482 
4832.2.0 (19990216)
484  All: Set copyrights to include 1999
485  All: Small bugfixes
486  I2C: Upgraded to newest archive of Simon Vogl
487  Module i2c-dev: NEW
488  Module i2c-ali15x3: NEW
489  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
490     directories, and somewhat improved
491  Module sis5595: NEW
492  Modules: Renamed all bus modules to i2c-*, new directory lay-out
493  Library: Support for new chip drivers, several small bugs fixed
494  Library manual pages: NEW
495  Program i2cdetect: Moved to detect directory
496  Program detect.pl: NEW
497  Program doc-features: NEW
498  Program sensors: Added man-page
499  Document BUGS: Added cdrom bug and kernel i2c conflict
500 
5012.1.2 (19990116)
502  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
503  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
504  Documentation in doc/kernel: NEW
505
5062.1.1 (19990107)
507  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
508                     and older
509  Module gl518sm.o: Miscelaneous bugs and problems solved
510  Program isadump: NEW
511
5122.1.0 (19981230)
513  Library: Completely NEW
514  Program sensors: NEW
515  Program grab_busses: NEW
516  Program decode-dimms: More information
517  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
518  Module w83781d.o: NEW
519  Module lm80.o: NEW
520  Module gl518sm.o: new procfile beep, several small updates
521  Modules: Now use pin readings, no more scaling within the kernel (use the
522           library instead)
523 
5242.0.2 (19981214)
525  Module eeprom.o: NEW
526  Program decode-dimms: NEW
527  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
528           2.1.58
529  Modules: Somewhat less verbose on transfers
530  Module lm78.o now recognizes and handles lm78-j and lm79
531
5322.0.1 (1998121?)
533  Module gl518sm.o updates, to make it actually work
534  Module lm75.o high/low-byte swapping write bug fixed
535
5362.0.0 (19981209)
537  Initial release
Note: See TracBrowser for help on using the browser.