root/lm-sensors/trunk/CHANGES @ 1594

Revision 1594, 24.9 KB (checked in by mds, 13 years ago)

add support for VT8235. Untested.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
3This is a list of the most important changes in 2.x versions. It is by
4no means complete, listing only the most significant changes.
5The ultimate way to know what has changed is to run diff, or even neater,
6ask CVS about it:
8  * Checkout the archive (see doc/cvs for how you can do this)
9  * Determine which tags are valid, by running this command from the
10    project root directory:
11      cvs status -v -l Makefile
12    Valid tags are usually of the form V2-1-0 for version 2.1.0
13  * Ask cvs for the difference between two versions:
14      cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS
15    for example:
16      cvs diff -r V2-0-0 -r V2-0-1 -u
202.6.6 (2002????)
21  NOTE: Requires i2c-2.6.6 or newer.
22  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
23  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
24  File doc/busses/i2c-sis645: Add license
25  File doc/chips/lm92: Add license, features
26  File doc/chips/maxilife: Add license, parameters, features
27  File doc/chips/smartbatt: Complete rewrite
28  File doc/chips/vt8231: Add license, parameters
29  File Add section for lm75; complete the lm78 section
30  Library: Add support for MC1066; add multiple VRM version support for lm87;
31           enhance adm1023 support
32  Makefile: Take kernel source location from /lib/modules/x.x.x/build
33  Module adm1021: Add support for MC1066
34  Module bmcsensors: New       
35  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
36                   kernel 2.5.43
37  Module gl518sm: Iterate allowed only for rev 0x00
38  Module i2c-amd756: Configure base address for nForce support;
39                     check for uninitialized base address
40  Module i2c-ipmi: New
41  Module i2c-sis630: Add support for SiS730
42  Module i2c-sis645: Improve support for SiS645/961;
43                     add support for SiS645DX/961 and SiS735
44  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
45  Module lm87: Add multiple VRM version support
46  Module w83781d: Fix in0/in1 initialization
47  Module smartbatt: New
48  Program Code cleanup; valid HTML; better HTML output;
49                           stop decoding on checksum error
50  Program dmidecode: Fix read bug; upgrade to version 1.8
51  Program doc-insmod: Complete rewrite; fix author output
52  Program doc-features: Complete rewrite; handle missing sysctl entries;
53                        handle unknown prefix with suggestion
54  Program lm_sensors.init: Remove spaces bug; add green/red output
55  Program mkpatch: Fix dmi_scan module compile
56  Program sensors: Add support for MC1066, Rambus Rimms;
57                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition
58  Program sensors-detect: Add support for MC1066, smart battery;
59                          add ACPI method for IBM system detection;
60                                                  work with old Perl versions again
61  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
632.6.5 (20020915)
64  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
65  File Fix temp[23] for as99127f; add vt8231
66  Library: Fix fan3_div writes for w8378* and it87; add vt8231
67  Module dmi_scan: new
68  Module ds1621: Fix enable/disable
69  Module eeprom: Do not corrupt 24RF08's when checksum=1
70  Module i2c-i801: Check for uninitialized base address;
71                   enable if not enabled
72  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
73  Module i2c-sis630: new
74  Module i2c-sis645: new
75  Module lm92: Fix in-kernel initialization
76  Module via686a: Remove VT8231 support
77  Module vt8231: new
78  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
79  Program dmidecode: new
80  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
81  Program mkpatch: Add entries for, lm92,
82                   pcf8574, pcf8591, smsc47m1, vt1211;
83                   add dmi_scan
84  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
85  Program lm_sensors.init: fix stop()
86  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
87                   add support for logging loadavg in RRD;
88                   fix down-converting raw labels for RRD;
89                   update chip support, still behind sensors
90  Program sensors: Add /usr/local/etc to config file path;
91                   fix -c and -u flags; add vt8231
92  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
93                          refuse to run on IBM systems;
94                          fix sysconfig module numbering;
95                          change quick write to not corrupt 24RF08's
972.6.4 (20020719)
98  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
99  File doc/vid: New
100  File include/sensors_vid.h: New
101  File Add vt1211, smsc47m1
102  Library: Add multiple VRM version support for adm1025, w83781d;
103           fix 'flex scanner jammed' on some systems;
104           add vt1211, smsc47m1, lm92;
105           fix access mode checking
106  Makefiles: For 2.4+ kernels, modules now install in
107             kernel/drivers/[i2c,sensors] , not misc/ , and
108             'make install' removes old versions in misc/ .
109             Use $CFLAGS and $CPPFLAGS if defined.
110  Module adm1025: Add multiple VID version support
111  Module ds1307: new
112  Module i2c-amd756: Add nVidia nForce support; fix block read length;
113                     reliability improvements
114  Module i2c-hydra: Flush posted writes
115  Module i2c-i801: Add support for 82801DB (ICH4)
116  Module i2c-i810: Flush posted writes
117  Module i2c-savage4: new
118  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
119  Module i2c-voodoo3: Flush posted writes
120  Module ds1307: New
121  Module lm92: New
122  Module smbus-arp: new
123  Module smsc47m1: new
124  Module via686a: Add support for VT8231 sensors
125  Module vt1211: new
126  Module w83781d: Add multiple VID version support; fix temp alarms
127  Program eeprom: new
128  Program i2cdump: Add smbus block command specification, add PEC support
129  Program lm_sensors.init: new
130  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
131                   pcf8574, pcf8591, smsc47m1, vt1211
132  Program p4b_smbus: Add support for ICH4
133  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
134  Program sensord.init: Renamed, was prog/init/sensors
135  Program sensord: Major update, now requires rrd source;
136                   not compiled by default
137  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
138                   (don't display algo. and adap.) option;
139                   add vt1211, smsc47m1, lm92
140  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
141                          add 82801DB, LM85; fix perl warnings;
142                          generate /etc/sysconfig/lm_sensors for
143                          lm_sensors.init script
1452.6.3 (20020322)
146  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
147  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
148  File doc/chips/it87: add more temp_type help
149  File Un-ignore it87 in8, temp3, fan3;
150                        add adm1021 section; add lm87 AIN[1,2] template;
151                        swap negative voltage limits for 782d,783s,627hf,
152                        697hf,it87; add more it87 help; swap neg. voltage
153                        limits for lm78(-j), lm79, w83781d, as99127f
154  Library: Add PCF8591, W83697HF, ADM1023 support;
155           fix w83* fan_min computes;
156           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
157  Module adm1024: Add MODULE_LICENSE("GPL")
158  Module bt869: Add s-video out and DVD resolution support
159  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
160  Module fscscy: implement min/max for voltages and fans
161  Module i2c-amd756: Add support for AMD768
162  Module i2c-i810: Add support for 810E
163  Module i2c-keywest: Big update, sync with kernel 2.4.18
164  Module i2c-piix4: Check for uninitialized base address
165  Module i2c-sis5595: Blacklist 645, 735
166  Module i2c-viapro: Check for uninitialized base address
167  Module gl518sm: Standardize /proc entries in0-3
168  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
169               fan -> fan1; fix temp2 limit writes
170  Module pcf8574: Add support for PCF8574A; /proc interface changed
171  Module pcf8591: new
172  Module sis5595: Blacklist 645, 735
173  Module w83781d: Add W83697HF support; allow force_subclients parameter
174                  for Tyan 2460
175  Programs, Update for new /proc names
176  Program new
177  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
178                   add text output
179  Program init/sensors: New SysV init script
180  Program Add support for fscscy, add more help entries
181  Program p4b_smbus: new
182  Program rrd: Install summ_week.cgi
183  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
184                   clean up chassis intrusion prints
185  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
186                          fix Via686a and it87 detection;
187                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
188                          fix uninitialized values; it87 beats lm78
1902.6.2 (20011118)
191  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
192  Chip Modules (all): malloc.h -> slab.h
193  Modules (all): Add MODULE_LICENSE("GPL")
194  File doc/FAQ: More updates and additions
195  File Fix it87 in5,in6 (-12,-5) calculations
196  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
197           update it87 alarm ID's.
198  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
199  Module fscscy: new (Fujitsu-Siemens Scylla driver)
200  Module i2c-amd756: Improve busy handling/printk's
201  Module i2c-i801: Add 82801CA/CAM support
202  Module i2c-keywest: Sync with PPC people, it works now
203  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
204  Module i2c-viapro: Add Via VT8233 support
205  Module it87: Merge alarm_* /proc entries to alarms
206  Module sis5595: Fix support for rev B0
207  Module via686a: Make limit initializations reliable
208  Module w83781d: Allow init=0 parameter to bypass initialization
209  Program isadump: Add flat address space (PCI) support
210  Program Add support for i2c-ali1535, adm1024, ds1621,
211                      fscpos, it87, maxilife, mtp008
212  Program sensors: Fix w83781d temp precision
213  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
214                          Fujitsu Poseidon and Scylla, 
215                          Intel 82443MX and 82801CA/CAM detection,                     
216                          add ITE 8172G detection (driver in kernel 2.4.10)
2182.6.1 (20010830)
219  File BUGS: Updated
220  File doc/FAQ: More updates and additions
221  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
222  File Fix/enhance it87 section
223  Library: ds1621 and it87 updates
224  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
225  Module i2c-amd756: Add AMD 766 support
226  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
227  Module i2c-piix4: Add Serverworks CSB5 support
228  Module i2c-sis5595: Recognize unsupported chips and refuse to load
229  Module adm1025: Fixed temp2 min/max writes
230  Module ds1621: Add 12-bit precision mode
231  Module it87: Enable all alarms, add in8 support, add sensor type selection
232  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
233                  remove support for module
234  Module sis5595: Recognize unsupported chips and refuse to load
235  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
236  Program eepromer: new
237  Program Fix dependencies on i2c-proc; disallow compilation
238                      of sensors.c as a module in kernel
239  Program sensors: it87 updates; adjust temp. precision for some chips
240  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
241                          recognize unsupported SiS chips;
242                          recognize AMD 766 and Serverworks CSB5.
2442.6.0 (20010612)
245  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
246        If your make fails because it can't find <linux/i2c-proc.h>, you
247        forgot this step!!!
248  File doc/FAQ: Many, many updates and additions
249  File doc/busses/i2c-sis5595: new
250  File doc/busses/i2c-tsunami: new
251  File doc/chips/it87: new
252  File doc/chips/via686a: Claim support for 686b.
253  File README.thinkpad: new
254  File Adjust as99127f in5 (-12V) and temp2 calculations;
255                        Add lm87, adm9240, ds1780, lm81 templates;
256                        Enhance help comments in file;
257                        Add Tyan S2510 dual-MTP008 example;
258                        Make separate sis5595 section.
259  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
260  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
261  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
262           Add support for maxilife-nba and amd1024;
263           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
264  Chip Modules (all ISA): Remove #include "i2c-isa.h"
265  Chip Modules (all): Change from sensors_* to i2c_* globals
266                      for new i2c-proc.[ch]
267  Makefiles: enhance to support Alpha architecture
268  Module adm1021: Fix lm84 and gl523sm support
269  Module adm1024: new
270  Module i2c-i801: Chip detection cleanup
271  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
272  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
273  Module i2c-tsunami: New
274  Module i2c-via: Ensure i2c bus is tristated correctly.
275  Module it87: new driver for IT8705, IT8712, Sis950 chips
276  Module lm78: Recognize chipid=0x20
277  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
278  Module mtp008: Fix temp initializations;
279                 Save BIOS pin configuration of temps and fans;
280                 Fix sensor type reads/writes and fan min writes;
281                 Fix spurious invalid sensor type messages
282  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
283                  used for patched kernel now.
284                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
285  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
286                  Allow force_addr=0xaddr
287  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
288  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
289                  reading changes; Add messages for subclient
290                  registration failure
291  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
292  Program i2cset: new
293  Program isadump: fix for Alpha arch. compiles
294  Program Fix adm9240 typos; Add more chips to;
295                      Remove ltc1710; Fix i2c_sis5595 typo;
296                      Support kernel 2.4.5 makefile change;
297                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
298  Program sens_update_rrd: new
299  Program sensord: Add -d (debug) and -p (pid-file) options
300  Program sensors: Change reported version from 1.3 to the lm_sensors version;
301                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
302                   Change mtp008 temps from max/min to limit/hyst;
303                   Add maxilife-nba, adm1024, it87 support.
304  Program sensors-detect: Recognize lm78 with chipid=0x20;
305                          Recognize SMSC Victory66 South Bridge;
306                          Add devfs /dev/i2c/x support;
307                          Add adm1024, it87xx support; Add thinkpad warning.
308  Program tellerstats: new
3102.5.5 (20010115)
311  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
312        you have kernel 2.4.0-prerelease or greater.
313  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
314  File doc/developers/proc: new
315  File Add mtp008 entries, adm1025 entries
316  Library: Add ds1621, mtp008 support
317  Module adm1021: Add support for adm1021a / adm1023
318  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
319  Module adm1025: Add support for remote temp; rename /proc entries to
320                  in[0-5] and temp[1-2]; fix negative temp readings
321  Module adm9240: Rename /proc entries to in[0-5]
322  Module ddcmon: allow force and force_ddcmon parameters
323  Module ds1621: new
324  Module i2c-ali1535: Enhance error checking and recovery; add mutex
325  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
326  Module i2c-piix4: add support for ServerWorks southbridge OSB4
327  Module lm87: cleanup, update voltage calculations
328  Module mtp008: new
329  Module pcf8574: change update time to 5 seconds
330  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
331  Module w83781d: fix beep setting via /proc
332  Programs editticket, readticket: new
333  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
334  Program more fixes; now adds many more modules
335  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
336                   add adm1025 temp2; report temp limits correctly as
337                   min/max or limit/hysteresis; print message if no
338                   sensors are found. Removed false errors from lm87 reads.
339  Program sensors-detect: Add ds1621, mtp008 detection;
340                          add ServerWorks detection
3422.5.4 (20001012)
343  Module i2c-viapro: Add support for Via 596B (0x3051)
344  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
345  Program fixed infinite loop
346  Program sensors-detect: Detect Via 596B (0x3051)
3482.5.3 (20001008)
349  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
350  File useful_addresses.html: update
351  Library: Add lm87 support
352  Module pcf8574: new
353  Module i2c-ali1535: new
354  Module i2c-ali15x3: removed force #ifdef.
355  Module i2c-i801: support Intel 82801BA (815E chipset)
356  Module i2c-i801: add i2c block write support, fix smbus block bugs
357                   (requires i2c 2.5.3 package)
358  Module i2c-i810: support Intel 82815
359  Module lm87: new
360  Module sensors: Fix for kernel 2.4.0-test8
361                  (remove copy_to_user_ret and put_user_ret)
362  Module w83781d: limit fan divisors to 8 max. for as99127f
363  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
364  Program i2cdump: Add smbus block read support
365  Programs i2cdetect, i2cdump: Improve error reporting
366  Program sensors: new switch -u (--unknown)
367  Program sensors-detect: detect Intel 82801BA (815E chipset)
368  Program sensors-detect: detect Intel 82815
369  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
370  Program sensors-detect: detect National LM87
371  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
372  Program sensors-detect: Improve error reporting
3742.5.2 (20000709)
375  File Fix lm80 in8 calculation
376  Module w83781d: W83783S no longer crashes on unloading
377  Program sensors-detect: more robustness in case of unknown i2c adapters
378  Program sensors-detect, libsensors: fix eeprom size reporting
379  Program sensord: more flexibility, support for alarm scanning etc.
380  Program sensors: support for ignore setting on sensor alarms.
381  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
3832.5.1 (20000618)
384  Library: Add adm1025 support
385  Module adm1025: new
386  Module ddcmon: Fixed bus scan which could hang SMBus
387  Module i2c-keywest: new
388  Module maxilife: Add support for Maxilife '99 (NBA)
389  Module via686a: Enable sensors if not enabled by BIOS
390  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
391  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
392  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
393  Module w83781d: Fis as99127f fan speed (was 66% too high)
394  Module w83781d: Improve beep input checking
395  Program i2cdump: Add Winbond-style bank selection
396  Program isadump: Add Winbond-style bank selection
397  Program sensors: Add adm1025 support.
398  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
399  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
400  File Add Maxilife '99 entries
401  File Remove some as99127f entries.
402    Note: For as99127f, reinstall manually (make install
403          won't reinstall it) or else 'sensors -s' will fail.
4052.5.0 (20000312)
406  Dropped all kernel 2.0 and 2.1 compatibility
407  Module i2c-i810: new
408  Module ddcmon: new
409  Module via686a: new
410  Module i2c-amd756: fixed region request
411  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
412  Module w83781d: Don't change pin settings at initialization;
413                  also fix chip detection.
414  Library: Support for ddcmon and via686a
415  Program sensors-detect: Support for ddcmon and via686a
416  Program sensors: Support for eeprom, ddcmon and via686a
4182.4.5 (20000116)
419  Introduced DESTDIR installation prefix
420  Module lm80: fixes, temperature now read and set correctly
421  Module i2c-voodoo3: driver enhancements
422  Module w83781d: fixes, AS99127 works much better now
423  Library: New ignore keyword in config file
424  Programs: Support for new ignore keyword
425  Program sensors-detect: Support for MGA detections
4272.4.4 (19991201)
428  Addition of the alpha release of AMD 756 SMBus host support.
429  Many fixes and updates to the gl518sm driver
430  Updates and fixes for device detection
4322.4.0 (19990920)
433  Too much to list.
434  i2c and smbus parts are split off to a separate i2c package.
435  New drivers and other stuff.
4372.3.4 (19990616)
438  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
439  All: Now compiles against kernel 2.0.x (again ;)
440  Module gl518sm: some updates and refinements
4422.3.3 (19990603)
443  All: Now compiles against kernel 2.3.x (x >= 1)
444  Module i2c-voodoo3: Timing issue fixes
445  Module bt869: Seems to be functional and relatively well tested
446  Many modules were modified to be more compatible with the new
447   Mutex structure in the new experimental kernels.
4492.3.2 (19990507)
450  Module i2c-hydra: Now compiles on 2.0.x kernels
451  Module i2c-lm75: Slightly better detection
452  * New, but not compiled by default:
453  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
454  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
4562.3.1 (19990501)
457  All: Now compiles on PPC
458  Module i2c-hydra: NEW
459  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
460  Module w83781d: Removed deadlock (mutex was not initialized)
461  Documentation: A few glitches removed
462  Makefile: default module installation directory is now
463            /lib/modules/current/extra/misc
464  Program sensors-detect: PPC Hydra now detected
465  Program sensors: Now prints complete GL518SM information
466  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
4682.3.0 (19990422)
469  All: Many, many changes and improvements
470  All: Many small bugs and problems removed
471  Modules: New insmod parameters
472  Modules: Much improved chip detection
473  Module maxilife: NEW
474  Module adm1021: MAX1617A now also supported
475  Module adm9240: DS1780 now also supported
476  Module w83781d: W83782D and W83783S now also supported
477  Program sensors-detect: NEW
478  Library: All chips now supported
479  Documentation: Very much improved
4812.2.2 (199903??)
482  Just some minor updates and bug fixes.
4842.2.1 (19990218)
485  All: Removed compile warnings
486  Module i2c-dev: Small bug removed if DEBUG=1 was used
487  Module sis5595: Now compiles for 2.0 kernels
488  Module adm1021: Detection corrected
4902.2.0 (19990216)
491  All: Set copyrights to include 1999
492  All: Small bugfixes
493  I2C: Upgraded to newest archive of Simon Vogl
494  Module i2c-dev: NEW
495  Module i2c-ali15x3: NEW
496  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
497     directories, and somewhat improved
498  Module sis5595: NEW
499  Modules: Renamed all bus modules to i2c-*, new directory lay-out
500  Library: Support for new chip drivers, several small bugs fixed
501  Library manual pages: NEW
502  Program i2cdetect: Moved to detect directory
503  Program NEW
504  Program doc-features: NEW
505  Program sensors: Added man-page
506  Document BUGS: Added cdrom bug and kernel i2c conflict
5082.1.2 (19990116)
509  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
510  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
511  Documentation in doc/kernel: NEW
5132.1.1 (19990107)
514  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
515                     and older
516  Module gl518sm.o: Miscelaneous bugs and problems solved
517  Program isadump: NEW
5192.1.0 (19981230)
520  Library: Completely NEW
521  Program sensors: NEW
522  Program grab_busses: NEW
523  Program decode-dimms: More information
524  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
525  Module w83781d.o: NEW
526  Module lm80.o: NEW
527  Module gl518sm.o: new procfile beep, several small updates
528  Modules: Now use pin readings, no more scaling within the kernel (use the
529           library instead)
5312.0.2 (19981214)
532  Module eeprom.o: NEW
533  Program decode-dimms: NEW
534  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
535           2.1.58
536  Modules: Somewhat less verbose on transfers
537  Module lm78.o now recognizes and handles lm78-j and lm79
5392.0.1 (1998121?)
540  Module gl518sm.o updates, to make it actually work
541  Module lm75.o high/low-byte swapping write bug fixed
5432.0.0 (19981209)
544  Initial release
Note: See TracBrowser for help on using the browser.