root/lm-sensors/trunk/CHANGES @ 4059

Revision 4059, 70.0 KB (checked in by khali, 8 years ago)

i2c-i801: Fix block transaction poll loops

Two of the three poll loops have the poll and sleep swapped,
causing an extra sleep to occur after the polled condition is
fulfilled. In practice, this doubles the amount of sleep time for
every block transaction.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
42.10.1 (2006????)
5  File doc/busses/i2c-piix4: Update (2.6 backport)
6  File etc/sensors.conf.eg: Add an smsc47m192 section
7  Library: Fix device scan when no i2c support is present
8           Add support for W83627EHF voltage inputs and alarms
9           Add support for the smsc47m192 driver
10           Fix all memory leaks (yeah!)
11           Fix no sensors being reported as an error
12  Makefile: Don't grep autoconf.h on user-space targets
13  Makefile: Fix depmod on non-running kernel version
14  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
15  Module i2c-amd756-s4882: Improve static semaphore initialization
16                           (2.6 backport)
17  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
18                   Add ICH8 support (2.6 backport)
19                   Fix block transaction poll loops (2.6 backport)
20  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
21  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
22                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
23                    Drop the fix_hstcfg parameter (2.6 backport)
24  Module i2c-viapro: Fix compilation with kernels < 2.4.21
25  Module lm83: Add LM82 support (2.6 backport)
26  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
27  Module w83792d: Fix PWM range (2.6 backport)
28  Program decode-dimms.pl: Decode depending on the memory type
29                           Decode the manufacturing date to an ISO8601 date
30                           Add the memory size computation and provide brief
31                            timing characteritics for SDRAM/DDR/DDR2 memory
32                           Add memory size computation for Rambus memory
33                           Various output cleanups and fixes
34  Program i2cdetect: Add a mode to print adapter functionalities
35  Program i2cdump: Restore bank after bank switching
36                   Add new mode W (read word on even register addresses)
37  Program mkpatch: Fix typo breaking f71805f
38  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
39                   Add smsc47m192 support
40                   Add abituguru support (Hans de Goede)
41                   Fix memory leak when printing an unknown chip
42  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
43                          Add ATI IXP200/300/400 SMBus detection
44                          Prevent warning on 64-bit PCI addresses
45                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
46                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
47                           F75384S/M, F75387SG/RG and F81218D detection
48                          Add Winbond W83793R/G detection
49                          Handle the W83791D driver difference between kernels
50                          Add nForce4 MCP04, MCP51 and MCP55 detection
51
52
532.10.0 (20060214)
54  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
55  File doc/busses/i2c-viapro: Update (2.6 backport)
56  File doc/chips/via686a: Update (2.6 backport)
57  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
58  File etc/sensors.conf.eg: Do not set vrm by default
59  File i2c-dev.h: Fix union i2c_smbus_data definition
60                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
61                  Add missing parentheses around macros
62                  Drop I2C_FUNC_SMBUS_EMUL
63                  Drop I2C_FUNC_SMBUS_*_PEC
64                  Drop I2C_SMBUS_*_PEC
65  File sensors_vid.h: Drop default VRM
66  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
67           This is intentional.  Use decode-dimms.pl if you still
68           need your memory SPD data.
69  Library: Big update to use libsysfs.  More TODO though.
70           Fix bus matching code for Linux 2.6 (Karsten Petersen)
71           Add f71805f, w83687thf support
72           Add platform drivers support
73           Fix sysctl warnings on x86_64
74           Restore vt1211 temp1
75  Makefile: Compile user-space programs with -Wundef
76  Module i2c-i801: Simplify the hardware PEC code
77                   Always set PEC mode explicitly before each transaction
78  Module i2c-i810: Documentation update, PCI IDs cleanup
79  Module i2c-keywest: Remove bus probing code (2.6 backport)
80  Module i2c-nforce2: Remove dead code (2.6 backport)
81                      Add the ID of the nForce4 MCP-04 (2.6 backport)
82  Module i2c-via: Remove dead code
83  Module i2c-viapro: Remove dead code
84                     Support I2C block read (2.6 backport)
85                     Code cleanups (2.6 backport)
86                     Improve debug register dump (2.6 backport)
87  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
88          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
89          i2c-sis645: Use pci_driver name to request I/O region; do
90                      not initialize i2c_adapter name to "unset" (2.6
91                      backport)
92  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
93                                              (2.6 backport)
94  Module adm9240: Cleanups (2.6 backport)
95  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
96  Module it87: Minor cleanups
97               Fix fan3_div setting bug (Anton V. Staaf)
98  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
99               Separate the register read function
100               Add PEC support for the ADM1032
101  Module via686a: Cleanups
102  Module w83627hf: Drop useless initialization step (2.6 backport)
103                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
104                   Fix alarms (Yuan Mu)
105                   Preserve fan min on fan div change (Yuan Mu)
106                   Properly handle W83627THF without VID (Yuan Mu)
107                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
108                   Add W83687THF support
109  Module w83781d: Drop W83697HF support (Grant Coady)
110  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
111                  Fix fan control mode (PWM/DC) reporting
112                  Fix fan div auto-adjust (Yuan Mu)
113                  Fix the subclient handling
114  Module w83l785ts: Minor cleanup (2.6 backport)
115  Module vt1211: Restore temp1
116  Modules vt1211, vt8231: Change default VRM to 9.1
117  Program decode-dimms.pl: Add lookup tables for manufacturer names
118                           Fix rounding error in PCxxxx speed computation
119                           Improve text output
120                           Improve speed under Linux 2.6
121                           Verify checksum before decoding anything
122                           Improve manufacturing location decoding
123                           Improve memory type detection
124                           Improve part number decoding
125  Program i2cdump: Drop now useless #ifdef tests
126                   Fix capability check for continuous byte mode
127  Program i2cget: New
128  Program i2cset: Add PEC support
129                  Fix argc check
130  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
131                                       Print the correct bus type if bus
132                                       functionality can be queried
133  Program isadump: Display the real addresses in flat mode
134  Program mkdev.sh: Silently skip already existing nodes
135  Program mkpatch: Include f71805f
136  Program sensord: Do not log algorithm names
137                   Drop EEPROM support (Aurelien Jarno)
138                   Add W83627EHF, F71805F/FG support
139                   Fix PC87365/PC87366 alarms
140  Program sensors: Drop free_the_label
141                   Fix compilation with uclibc (no iconv)
142                   Add f71805f, w83687thf support
143  Program sensors-detect: Drop algorithm names
144                          Do not rely on i2cdetect -l printing algo names
145                          Simplify adapter name matching mechanism
146                          New address for ADM1032, ADT7461
147                          Improve ADT7467, ADT7468 support
148                          Fix MAX6659 reported driver
149                          Add Fintek F71805F detection
150                          Add Analog Devices ADT7476 detection
151                          Add Intel 82845G detection
152                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
153                          Fix udev detection in some corner case
154                          Improve DS1621 detection
155                          Always prefer ISA access over SMBus access
156
157
1582.9.2 (20050906)
159  File doc/chips/*: Big update (2.6 backport)
160  Library: Drop ds1780-specific code (now use adm9240)
161           Fix memory leak in sensors_get_label()
162           Support /sys/class/hwmon (Linux 2.6.14+)
163           Limit stack usage in sensors_read_proc_chips()
164  Makefile: Detect 2.6+ kernels and check targets
165  Man page isaset.8: Fix typos
166  Module adm1031: Fix broken kfree() calls
167  Module i2c-ali1563: New (2.6 backport by Winbond)
168  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
169  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
170          w83627hf.c: Tag find function __init
171  Module lm93: Fix memory leak
172  Module smsc47m1: Fix PWM enable polarity on read
173  Modules w83627hf, w83781d: Allow setting fan divisor to 128
174  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
175                           Added DDR/DDR2 frequency reporting in convenient
176                           form of DDRxxx PCyyyy
177  Program i2cdump: Properly handle short i2c block reads
178  Program fancontrol.pl: Fix compile errors
179  Program mkpatch: Include i2c-ali1563
180                   Include w83792d
181  Program pwmconfig: Fix unsafe temporary file use
182  Program rrd: Support 2.6 kernels
183  Program sensord: Add support for w83637hf
184                   Support pc87360 (Henrik Brix Andersen)
185  Program sensors: Support the VAIO "VGN" prefix for eeprom
186  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
187                          Advertise the w83792d driver
188                          Improve IT8705F and IT8712F detection
189                          Merge LM82 and LM83 detection
190                          Add W83687THF detection
191
192
1932.9.1 (20050412)
194  File doc/busses/i2c-nforce2: Update
195  File doc/chips/it87: Update
196  File doc/chips/lm90: Update for adt7461
197  File doc/chips/mic74: New
198  File etc/sensors.conf.eg: New sections for lm92 and w83792d
199  Library: Add support for 2.6 fscpos driver (Stefan Ott)
200           Fix sis5595 in4 (Aurelien Jarno)
201           Add support for 2.6 gl520sm driver (Maarten Deprez)
202           Add support for 2.6 bmcsensors driver (Yani Ioannou)
203           Add support for w83792d (Chunhao Huang/Winbond)
204           Add support for 2.6 adt7461 (James Chapman)
205           Add support for 2.6 lm92
206           Add support for 2.6 vt1211
207           Add preliminary support for 2.6 w83627ehf
208  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
209            Use -fno-strict-aliasing on all architectures
210  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
211  Module bmcsensors: Fix compile error
212                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
213  Module ds1621: Fix detection (Aurelien Jarno)
214  Module eeprom: Discard SPD-centric checksum module parameter
215                 Cleanup detection function (backport from Linux 2.6)
216  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
217  Module i2c-i801: Temporarily disable broken I2C block read
218  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
219                   Gelato)
220  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
221  Module i2c-viapro: Prevent repeated resets
222  Module it87: Improve Super-I/O detection
223               Limit I2C address range
224               Support VID on the IT8712F
225  Module lm75: Only initialize CMP/INT bit
226  Module lm78: Fix bug with setting negative temperature limits
227  Module lm85: Properly differentiate between ADM1027 and ADT7463
228               Add EMC6D102 support
229  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
230               Add limited ADT7461 support
231  Module lm93: Fix IN10 (+5V) scaling
232  Module mic74: New
233  Module w83627hf: Support secondary Super-I/O address
234                   Enable temp2 and temp3 if they are disabled
235  Module w83781d: Revert AS99127F temp2 and temp3 computation change
236                  Skip final initialization step for AS99127F chips
237  Module w83792d: New (Chunhao Huang/Winbond)
238  Program ddcmon: New; user-space replacement for the ddcmon driver
239  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
240  Program isadump: Handle Super-I/O keys
241  Program lm_sensors.init: Cleanups (Axel Thimm)
242  Program mkdev.sh: Add basic command-line interface
243  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
244  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
245                     Don't complain about read-only enable files (lm85)
246                     Fix handling of alternate config file name
247  Program sensord: Fix erroneous error message (Aurelien Jarno)
248                   Support sis5595 in4 (Aurelien Jarno)
249                   Support w83627thf
250                   Support the separate it8712 prefix (Aurelien Jarno)
251  Program sensors: Display sis5595 in4 (Aurelien Jarno)
252                   No errors on missing pc87360 fans
253                   Add gl520sm support (Maarten Deprez)
254                   Improve vt1211 error/ignore handling (Michael Carland)
255                   Support w83792d, w83627ehf
256  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
257                          Improve IT8705F and IT8712F detection
258                          Improve udev detection
259                          Fix DS1621 detection
260                          Add W83627EHF detection
261                          Add ATI SMBus detection
262                          Add VT1211 alias detection
263                          Warn if chip modules not found
264                          Add i2c-ipmi to list if bmcsensors is on it
265                          Add PC87591 detection
266                          Search for correct udev db file name
267                          Add nForce3 250Gb and nForce4 detection
268
269
2702.9.0 (20041228)
271  NOTE: Requires i2c-2.9.0 or newer!
272  File README.thinkpad: Update
273  File doc/chips/it87: Cleanups
274  File doc/chips/lm63: New
275  File etc/sensors.conf.eg: Set via686a voltage limits
276  File kernel/chips/Module.mk: Resync module list with mkpatch
277  File kernel/include/sensors_compat.h: Define __devexit_p if missing
278                                        (kernels 2.4.16 and older)
279  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
280                             and dec_use removed in release 2.8.0
281  Modules (all chip drivers): Remove owner from i2c_driver; pass
282                              controlling_mod to i2c_register_entry() again
283  Module bmcsensors: Support function 1/x
284  Module i2c-amd756: Display the real bus name
285  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
286  Module i2c-i801: Support i2c block read (ICH5 and higher)
287                   Add PEC support for ICH6
288                   Add support for ICH7
289  Module i2c-ipmb: Remove from build since it doesn't work
290  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
291  Module icspll: Fix compilation
292  Module lm63: New driver for the National Semiconductor LM63
293  Module lm83: Use signed types for temperatures
294               Check limits on register writes
295  Module lm87: Round voltages properly
296               Retry on read errors (David Knierim)
297               Less agressive init (no reset)
298  Module lm90: Use signed types for temperatures
299               Check limits on register writes
300  Module lm93: Added module parameter for VID pin input thresholds.
301               Fix typo in dynamic VID alarms
302               Adds a couple log messages for failed transactions (David
303               Knierim)
304               Fix compilation breaking C99-ism (Axel Thimm)
305               Fix block read retries
306  Module pc87360: Support secondary Super-I/O address
307  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
308  Library: Add lm63 support
309           Add lpc47b397 support
310  Programs *.init: Rename lockfile to match file name
311  Programs i2cset, isaset: Written byte/word can be masked
312  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
313  Program mkpatch: Include i2c-amd756-s4882
314  Program pwmconfig: Handle new (well, back to old) pwm files names for
315                     Linux 2.6.10 and up
316  Program sensord: Do not scale load average (Aurelien Jarno)
317  Program sensors: Add lm63, lpc47b397 support
318                   Support DDR2 memory module EEPROMs (Rudolf Marek)
319                   Support only one location for the default configuration file
320                   Display the default configuration file location in --help
321                   Simplify the configuration file opening code
322  Program sensors-detect: Improve LM63 detection
323                          Discard IBM Thinkpad detection code
324                          Add PCA9556, LPC47B397, ICH7 detection
325                          Fix W83792D detection, add W83791SD detection
326
327
3282.8.8 (20041007)
329  File doc/donations: Update
330  File doc/lm_sensors-FAQ.texi: Add 4.6.1
331                                Update 4.7
332  File doc/chips/gl518sm: Update "iterate" info
333  File doc/chips/it87: Discard outdated module parameters
334  File doc/chips/lm75: LM77 is not supported
335  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
336  File doc/chips/lm93: New
337  File doc/chips/w83l785ts: Improvements
338  File etc/sensors.conf.eg: Fix it87 lines order
339                            Update lm87 section
340  File kernel/include/sensors_vid.h: Support VRM 10.0
341  Library: Support 2.6 adm1025
342           Preliminary support for 2.6 lm87
343           Support 2.6 adm9240
344           Allow an alternative sysfs file name for chip features (2.6)
345           Fix lm83 critical limits (2.6)
346           Add lm93 support
347           Prevent some procfs errors from being silently ignored
348  Makefiles: Implement user_uninstall (Rudolf Marek)
349             Spoof LOGNAME and HOSTNAME when making html man pages
350  Module adm1025: Refine detection
351                  Update limit registers again (revert of 2.8.1)
352                  Init high limits if they read 0
353                  Fix conversions
354  Module lm75: Refine detection
355  Module lm78: Fix init
356  Module lm83: Default to kind lm83 if forced.
357               Fix temperature macros.
358  Module lm90: Add LM86, MAX6657 and MAX6658 support
359  Module lm93: New
360  Module mtp008: Fix the setting of limits on temp2
361  Module pca9540: Refine detection
362  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
363                  Support VID
364                  Fix fan_div file when fan count is less than 3
365                  Additional init and debug
366  Module smsc47m1: Fix pwm_enable being inverted
367  Module w83627hf: Add alternate VCORE/in0 calculation method
368                   Remove reset of chip by driver on initialization
369  Module w83781d: Fix default VRM for w83791d
370  Module w83l785ts: Implement read error handling (backport from 2.6)
371  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
372                    Wait for user input to continue (as opposed to 5 sec
373                    delay), can be skipped with -y
374                    Various cleanups and code refactoring
375                    Update manual pages
376  Program fancontrol.init: New (Dean Takemori)
377  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
378  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
379                           (Giuseppe Della Bianca)
380  Program mkdev.sh: Detect devfs and refuse to run
381                    Use mknod's mode instead of chmod
382  Program mkpatch: Include xeontemp and pc87360
383  Program sensors: Rework adm1025 support
384                   Display pc87365/pc87366 VID
385                   Improve smsc47m1 support
386                   Hide 2.6 adm1027 alarm_mask being missing
387                   Print VRM version for all supported chips
388  Program sensors-detect: Support LM93, LM77, LM63
389                          Support PC8739x Super-I/O family (no sensors)
390                          Fix PCA9540 support
391                          Refine ADM1025/ADM1025A detection
392                          Refine LM75 detection
393                          Ignore missing /proc/modules (Andras Bali)
394                          Script-wide Perl cleanups
395                          Support udev
396                          Support W83792D, LM96000
397
398
3992.8.7 (20040611)
400  File README.thinkpad: Update 24RF08 status
401  File doc/fan-divisors: More info on accuracy
402  File doc/lm_sensors-FAQ.texi: Update 4.27
403  File doc/chips/adm1031: New
404  File doc/chips/max1619: New
405  File doc/chips/pc87360-fan: Renamed to pc87360
406  File doc/chips/pc87360: Big update
407  File doc/chips/w83781d: Update AS99127F documentation
408  File etc/sensors.conf.eg: Add comments about BP6 voltages
409                            Add comment on Asus A7V8X-X VCore
410                            Misc fixes to lm80 section
411                            Update via686a section
412                            New lm99 section
413                            Add section for LM85-like chips
414                            Preliminary pc87366 section
415                            Add comment on GL520SM application modes
416                            Document beep_enable (Aurelien Jarno)
417                            Preliminary max1619 section
418                            Preliminary adm1030 and adm1031 sections
419  Library: Fix 2.6 VRM
420           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
421           Fully support the PC87360 family
422           Support the lm99
423           Add version and date strings
424           Support 2.6 max1619
425  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
426  Man page i2cdetect.8: document new command line flags
427  Man page i2cdump.8: More details on how i2cdump can write to a chip
428  Modules (all chip drivers): Rework memory allocation scheme.
429  Module adm1031: New (Alexandre d'Alton)
430  Module bmcsensors: Fix oops by creating thread for initialization
431  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
432  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
433          asb100.c, lm92.c: Use swab16
434  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
435  Module gl520sm: Less agressive initialization process
436                  Fix temp1 limits being unsettable in application
437                  Ensure that temp2 and in4 are not used at the same time
438  Module i2c-i801: Support 6300ESB and ICH6
439  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
440  Module i2c-sis645: Add support for SiS655
441  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
442  Module lm90: Support LM99 and LM89
443  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
444               Get rid of useless i2c_probe call
445  Module max1619: New (Alexey Fisher)
446  Module p4b_smbus: Add support for mobile versions of the 82801
447                    (Axel Thimm)
448  Module pc87360-fan: Renamed to pc87360
449  Module pc87360: Also support PC87365 and PC87366
450                  Add write support
451                  Correctly set the chip name depending on the type
452                  Add voltage and temperature support
453                  Fix fan speed computation
454                  Retrieve fans configuration from Super-I/O space
455                  Export pwm_enable (read-only)
456                  Honor pwm invert bits
457                  Clear fan alarms after we read them
458                  Do not read fan data when monitoring is disabled
459                  Do not include SENSORS_INSMOD stuff
460                  New module parameter: init
461                  Fan clock dividers change automatically
462                  Add thermistor dupport
463  Module smsc47m1: Lock on reads and writes
464                   Various PWM fixes
465  Module thmc50: Fix address range
466  Module via686a: Fix voltage roundings
467                  Simplify temperature conversions
468  Module w83781d: Drop PWM support for as99127f
469                  Invert AS99127F beep bits in driver rather than user-space
470  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
471  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
472  Program fancontrol.pl: New
473  Program i2cdetect: Adapt probing method to address
474                     Add -q and -r flags to force probing methods
475                     Allow probing range selection
476  Program isadump: Major improvements
477  Program isaset: New
478  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
479                   module
480                   Include i2c-nforce2
481  Program sensord: New --rrd-no-average parameter
482                   Syncronize time slots with rrd
483                   Fix W83781D temp3 alarm (Aurelien Jarno)
484                   Add ASB100 support (Andrew May)
485  Program sensors: Fully support the PC87360 family
486                   Fix lm80 temperature alarms
487                   Support the lm99
488                   Do not invert AS99127F beep bits anymore
489                   Fix W83781D temp3 alarm (Aurelien Jarno)
490                   Print library version string
491  Program sensors-detect: Rework Super I/O detection
492                          Support SiS655/SiS96x
493                          Support ADT7461 and ADT7467
494                          Better support for ADM1027, ADT7460 and ADT7463
495                          Explicitly support ADM1028
496                          Scan all logical devices of PC87365 and PC87366
497                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
498                          Detect eeproms with software write protect (not
499                          enabled by default)
500                          Support ALi 1563 (2.6 only)
501                          Drop LTC1710 support
502                          Use byte reads for probing on ranges 0x30-0x37 and
503                          0x50-0x5F
504                          Improve LM89 and LM99 support
505                          Support GeForce FX 5900 video cards
506                          Fix devfs misdetection (Aurelien Jarno)
507                          Detect 6300ESB, ICH6
508                          Fix double detection of ISA chips
509                          Support MAX1619
510                          Support PC87373 Super-I/O
511                          Fix unknown adapters appearing multiple times
512                          Refine MAX6650/MAX6651 detection
513
514
5152.8.6 (20040405)
516  File README.thinkpad: Update status
517  File doc/chips/pca9540: New
518  File doc/chips/pc87360-fan: New
519  File etc/sensors.conf.eg: Update pcf8591 default configuration
520  Library: Switch to new sysfs naming standard
521           Fix gcc 3.3 warnings (Philipp Thomas)
522           Support 2.6 ds1621 and pcf8591
523           Change pcf8591 magnitudes
524           Support pc87360-fan
525  Makefile: Install shared library 755
526  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
527  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
528  Modules ds1621, pcf8591: Check for capabilities before using them
529                           (Aurelien Jarno)
530  Modules pcf8574, pcf8591: Cleanups
531  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
532  Module adm1021: Better detection and initialization
533  Module pca9540: New driver for the Philips PCA9540
534  Module pc87360-fan: New driver for the National Semiconductor PC87360,
535                      PC87363 and PC87364 Super I/O chips
536  Module smsc47m1: Support the LPC47B27x
537  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
538  Program i2cdetect: Skip special addresses by default
539  Program sensord: Prevent null pointer dereference (Tim Toohey)
540  Program sensors: Print the degree symbol in the terminal's current locale
541                   (Aurelien Jarno)
542                   Update pcf8591 print to support 2.6 driver
543                   Support pc87360-fan
544  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
545                          Improved SiS chips support
546                          Add a white list of IBM systems
547                          Drop support of undetectable adapters
548                          Fix smart battery detection
549                          Add smart battery charger and manager detection
550                          Rework adm1021 and clones detection
551                          The PC87360, PC87363 and PC87364 Super I/O chips
552                          now have a (preliminary) driver
553                          Rework Super I/O detection
554                          Better support of devfs
555  Program sensors-detect-stat.pl: New
556
557
5582.8.5 (20040305)
559  File doc/chips/SUMMARY: Update
560  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
561  Makefiles hotplug and rrd: Remove -o and -g arguments to install
562  Module bmcsensors: Increase max SDRs to 100
563  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
564  Module i2c-amd756: Don't register driver to avoid driver conflicts.
565                     (Daniel Rune Jensen)
566  Module it87: Better temperature sensor types handling (Takeru Komoriya)
567               Fix reset=1 (Takeru Komoriya)
568  Module lm80: Code cleanups
569  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
570  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
571  Module w83627hf: Add w83637hf support
572                   Fix exported name
573                   Fix PWM in w83627thf
574                   Preserve other bits when forcing temp2/3 to comparator mode
575  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
576                  Remove asb100 support
577  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
578          Define driver ID if i2c-id.h doesn't have it yet.
579  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
580          Backport oops fix from Linux 2.6.
581  Modules (all chips): Get rid of useless headers
582  Program decode-edid.pl: Add sysfs support
583  Program sensors: Add w83637hf support
584                   Add support for Shuttle Ethernet EEPROMs
585                   Drop 2.6 subclient detection
586  Program sensors-detect: Add heuristics to the LM80 detection function
587                          Add support for W83L785R, improve W83L784R/AR
588                          Add GeForce FX 5600 as supported by rivatv
589                          More Super IO chips, better handling
590  Library: Update to match renames in fscher
591           Reverse temporary changes to w83l785ts mappings
592           Fix vt1211 and vt8231 uch_config not being writable
593           Add 2.6 lm80 support
594           Add w83637hf support
595           Remove in6 and temp1 from vt1211 and vt8231
596           Add support for Shuttle Ethernet EEPROMs
597           Remove unused as99127f features
598
599
6002.8.4 (20040207)
601  File doc/lm_sensors-FAQ.texi: Update 4.20.
602  File doc/chips/it87: Change hyst to low
603  File doc/chips/w83l785ts: New
604  File etc/sensors.conf.eg: Change it87 hyst to low
605                            Fix w83697hf supposed to have temp3
606                            Limits initialization for adm1025/ne1619
607                            Handle fscher voltage conversions
608                            Add Tyan Trinity S2495 KT400 setup (Eric
609                              Schumann)
610                            Fix fscher fan labels (Reinhard Nissl)
611  Library: Better 2.6 eeprom support
612           Change it87 hyst to low
613           Add 2.6 gl518sm, fscher support
614           Fix 2.6 negative voltages handling
615           Temporary fix to w83l785ts mappings
616  Module adm1025: Separate prefix for NE1619
617  Module adm1026: Remove use of temporary ID
618                  Define addresses as a range
619  Module bmcsensors: Fix reservations
620  Module fscher: Externalize voltage conversions
621  Module eeprom: Remove memtype
622  Module i2c-piix4: Fix resource release error
623                    Various cleanups
624  Program decode-vaio.pl: Add sysfs support
625  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
626                   Drop linux 2.2 support
627                   Add w83627hf
628  Program sensors: Do not show algorithm by default
629                   Cleanup temperature unit display code
630                   Cleanup label spacing code
631                   Fix output to UTF-8 terms (Marcel Sebek)
632                   Simplify gl518sm print
633                   Do not ignore errors in FSC chips prints
634                   Fix w83l785ts print
635                   Cleanup FSC chips prints
636  Program sensors-detect: Fix PATH issues
637                          Correctly point to the fscher driver
638
639
6402.8.3 (20040115)
641  File lm_sensors.spec: Update
642  Library: Add 2.6 eeprom, lm90 support
643           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
644  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
645  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
646  Module i2c-amd756: Fix byte writes
647  Module i2c-tsunami: Cleanups (Daniel Nilsson)
648  Module it87: Fix sg_tlx writes; fix sensor type reporting;
649               add 8712 Super I/O detection;
650               remove initialization of temp_type and fan_ctl;
651               remove init and temp_type module parameters
652  Module lm90: Handle hysteresis differently
653  Module smartbatt: Fix detection, magnitudes, temp
654  Module w83781d: Fix negative voltages
655  Module w83l785ts: New
656  Program eeprog: Make 8 bit mode the default
657  Program fancontrol: Improvements, fixes, support 2.6 kernels
658  Program mkpatch: Add lm75.h
659  Program pwmconfig: Improvements, fixes, support 2.6 kernels
660  Program sensors: Add ASB100 support
661  Program sensors-detect: Add 8712 Super I/O detection;
662                          add W83L785TS detection
663
664
6652.8.2 (20031211)
666  IMPORTANT: Limit initialization removed from all chip drivers!
667             If you didn't run 'sensors -s' in the past you may need to now!
668  File sensors.conf.eg: Change lm75 scaling back to 1;
669                        Add example for asb100
670  Library: Fix bmcsensors scaling, increase number of sensors;
671           Add w83627thf support; Advance version to 3.0.0;
672           Add hermes, ADM1032, ASB100 support;
673           Add it87 sensor type support;
674           Add sysfs support for kernel 2.6;
675           Fix memory leaks
676  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
677             Fail if no kernel .config file exists;
678             Don't build module dependencies for user and user_install
679  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
680          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
681          smsc47m1, thmc50, via686a, w83627hf, w83781d:
682          Remove initialization of limits by driver.
683  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
684  Modules (chip): Init cleanups
685  Module asb100: New
686  Module bmcsensors: Fix voltage scaling, voltage and fan limits
687  Modules ddcmon, eeprom: Add failure printks
688  Module fscher: New (Fujitsu-Siemens Hermes driver)
689  Module i2c-amd756: Fix AMD8111 support
690  Module i2c-amd8111: Fix byte writes
691  Module i2c-nforce2: Fix byte writes
692  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
693  Module i2c-sis630: Sync with 2.6.0-X driver version
694  Module i2c-viapro: Add support for Via 8237
695  Module it87: Add pwm and "smart guardian" support;
696               add it87 sensor type support
697  Module lm75: Fix negative voltages
698  Module lm90: Add ADM1032 support
699  Module w83781d: Fix 791d and 627hf detection
700  Module w83627hf: Add VID support
701  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
702  Program eeprog: New
703  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
704                                       support sysfs for i2c bus search
705  Program i2cdetect: Add -l option to list busses
706  Program i2cdump: Add 'c' mode for consective address reads
707  Program mkpatch: Cleanups
708  Program pwmconfig: Handle multiple fans controlled by a single pwm
709  Program sensord: Remove ddcmon support
710  Program sensors: Add ADM1032 support; add messages for sysfs
711  Program sensors-detect: Prefer Super I/O drivers;
712                          Fix W83627HF and W83791D detection; detect CSB6;
713                          Detect ADM1029, ADM1030, ADM1031;
714                          Detect W83637HF, W83697UF;
715                          Add it87 sensor type support; add sysfs support
716                          Reduce lm80 misdetects; remove PCFxxxx "detection"
717                          Detect VT8237 (KT600)
718                          Use VPD instead of DMI+ACPI for Thinkpad detection
719                          Suggest new asb100 driver instead of w83781d
720
721
7222.8.1 (20031005)
723  NOTE: Requires i2c-2.8.1 or newer!
724  File sensors.conf.eg: Improved adm1025 section
725                        Default temp labels for as99127f
726                        Improved lm83 section
727                        Better support for Asus A7V8X-X
728  File doc/chips/SUMMARY: Add SMSC manufacturer ID
729  File doc/chips/adm1025: Add decent documentation (almost new)
730  File doc/chips/lm83: Known motherboards list update, misc updates
731  Library: Change adm1025 names (hyst/over become low/high)
732           Swap adm1025 temp1 and temp2 to match the driver's order
733           Advance version to 2.0.1
734           Update lm83 support
735           Add support for lm90, xeontemp, max6650
736           Add separate messages for read and write errors
737           Add missing message for parse error
738  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
739  Modules (various): Fix includes for compilation on Alpha
740                     Use the new i2c_delay function instead of the various
741                     do_pause functions
742  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
743  Module i2c-nforce2: Cleanups
744  Module i2c-i810: Use readl/writel for portable access to PCI memory
745  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
746  Module i2c-savage4: Use readl/writel for portable access to PCI memory
747  Module i2c-sis630: Fix detection
748                     Add block data read/write support
749  Module i2c-sis645: Detection method change/bugfix
750  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
751  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
752  Module adm1025: Major driver update
753                  Add support for Philips NE1619
754                  Simplify the driver a lot (unified voltages, unified
755                  temperatures and much more)
756                  Fix default voltage limits
757                  Change default temperature limits
758                  Swap remote and local temperatures to match the internal
759                  registers order (make the code unification possible)
760                  Export remote diode fault through alarms
761  Module ddcmon: Major update
762                 Add half a dozen new features
763                 Add checksum parameter (same as for the eeprom module)
764                 Fix monitor limits
765  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
766  Module lm78: Fix a fan_div/fan_min bug
767  Module lm83: Add t_crit and alarms support
768  Module lm90: New
769  Module max6650: New
770  Module saa1064: New
771  Module smsc47m1: Add support for 47M142
772  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
773                   enhance w83627thf support
774  Module w83781d: Enhance chip detection; clean up error returns;
775                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
776  Module xeontemp: New
777  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
778                           Mark Rambus as unsupported
779  Program decode-edid.pl: New
780                          Interfaces between our eeprom module and
781                          parse-edid from the read-edid project
782  Program p4b_smbus: Fix SMP compilation
783  Program sensord: Add support for IT87 (Mike Black)
784                   Change ADM1025 support to match the changes made to
785                   the library
786  Program sensors: Rewrite and enhance EEPROM support
787                   Change LM83 and ADM1025 support to match the changes
788                   made to the library
789                   Add DRDRAM support to print_eeprom
790                   Exit(1) on /proc write failure (Malte Starostik)
791                   Add LM90, MAX6650 support
792  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
793                          Add support for LM82, LM86, LM89
794                          Improved W83781D family detection
795                          Add support for AS19927F rev.2, ASB100 Bach
796                          Add support for Asus Mozart-2 (3 types)
797                          Add support for NE1619
798                          Add support for FSC Hermes
799                          Make sure /sbin is in the user's path
800                          Fix EEPROM detection
801                          Automatic module.conf and /dev/i2c* detection
802                          Improve LM82 and LM83 detection
803                          Handle "to-be-written" cleanly
804                          Add detection for 47M14x Super I/O
805                          Handle the one-address-many-chips-same-driver
806                          case
807
808
8092.8.0 (20030714)
810  NOTE: Requires i2c-2.8.0 or newer!!!
811  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
812                  2.4.13 or later required for mkpatch.
813  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
814                  i2c package
815  File doc/chips/fscscy: Add watchdog documentation
816  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
817  File sensors.h: Now automatically generated
818  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
819           add adm1026, lm83, lm85, w83791d support;
820           Advance version to 2.0.0
821  Makefiles: Generate warnings if new library won't be found by ld.so;
822             Modules now install in kernel/drivers/i2c/[busses,chips];
823             Ensure that headers in /usr/local/include are used first;
824             Don't use /usr/include headers for modules;
825             Handle multiple UTS_RELEASE definitions in linux/version.h;
826             Automatically generate kernel/include/sensors.h;
827             Remove old gzipped modules; remove old misc directory if empty;
828             Remove pre-2.4 installation method;
829             -Wall now the default;
830             Add new targets user, user_install, and help;
831             Run depmod after module installation
832  Modules (all): Cleanups including
833                - Add #include <i2c-proc.h>
834                - C99 initializers
835                - Remove #ifdef MODULE
836                - Remove #ifndef THIS_MODULE
837                - Remove #ifndef MODULE_LICENSE
838                - Remove other 2.1/2.2 #ifdefs
839                - Remove #include "sensors.h", copy SYSCTL defs to module
840                - Remove excess #includes
841                - Remove argument in i2c_register_entry()
842                - Remove dummy xxx_command() definition
843                - Remove EXPORT_NO_SYMBOLS
844                - Remove init_MUTEX #define
845                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
846                  no longer adjust their own refcounts
847                - Use module_init() and module_exit()
848                - Update to new i2c_driver struct definition
849  Modules (bus PCI): Convert to PCI-module-style initialization
850  Modules (several): Add support for AMD Opteron VRM (VID) encoding
851  Module adm1021: Set alarm on failed reads and report old value;
852                  merge changes from kernel 2.5.54
853  Module adm1026: New
854  Module bmcsensors: Fix compile when DEBUG=1
855  Modules ddcmon, eeprom: Use i2c block reads if possible;
856                          better error handling
857  Module ds1307: Add to Makefile
858  Module gl520sm: Fix temperature over/hyst writes
859  Module lm75: merge changes from kernel 2.5.54
860  Module lm83: New
861  Module lm85: New
862  Module i2c-ali1535: Check for invalid transaction
863  Module i2c-ali15x3: Check for invalid transaction
864  Module i2c-amd756: merge changes from kernel 2.5.54;
865                     check for invalid transaction
866  Module i2c-amd8111: merge changes from kernel 2.5.54
867  Module i2c-i801: Add support for 82801EB (ICH5)
868  Module i2c-i810: Fix for some chips
869  Module i2c-nforce2: New
870  Module i2c-piix4: Check for invalid transaction
871  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
872  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
873        north bridges; SiS962 and SiS963 south bridges
874  Module i2c-viapro: Check for invalid transaction
875  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
876          pwm and pwm enable support; update docs
877  Module smbus-arp: Check adapter for HW or SW PEC support;
878                    add reset option
879  Module w83781d: Add support for w83791d
880  Module w83627hf: New
881  Program decode-dimms.pl: Recognize DDR and Rambus
882  Program eeprom: Fix writes for small eeproms
883  Program eeprom, eepromer: Use local i2c-dev.h for build
884  Program fancontrol: New
885  Program lm_sensors.init: Call sensors -s in start()
886  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
887                   Add adm1026,lm85 support;
888                   Remove sensors.c file; add sensors_compat.h;
889                   Remove patches to i2c-core.c and drivers/char/mem.c;
890                   Now works only for kernels 2.4.13 or later
891  Program p4b_smbus: Fix 'make install';
892                     Install in same place as other modules;
893                     Clear correct bits in config word
894  Program pwmconfig: New
895  Program sensors: add adm1026, lm85, w83791d support
896  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
897                          w83627hf, w83627thf, w83697hf);
898                          Add support for SiS651, SiS961, SiS745, SiS746;
899                          Support dmidecode 2.0 and later;
900                          Fix "C" format error;
901                          Add support for adm1026, 82801EB (ICH5), W83791D;
902                          Add support for w83l785ts, nForce2;
903                          Fix UTF-8 incompatibility;
904                          Better support for lm75;
905                          Add support for lm83
906
9072.7.0 (20021208)
908  NOTE: Requires i2c-2.7.0 or newer.
909  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
910  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
911  File doc/busses/i2c-sis645: Add license
912  File doc/chips/lm92: Add license, features
913  File doc/chips/maxilife: Add license, parameters, features
914  File doc/chips/smartbatt: Complete rewrite
915  File doc/chips/vt8231: Add license, parameters
916  File sensors.conf.eg: Add section for lm75; complete the lm78 section
917  Library: Add support for MC1066; add multiple VRM version support for lm87;
918           enhance adm1023 support; initial support for Sony Vaio eeprom;
919           add support for bmcsensors; add hacks for additional dummy drivers
920  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
921            add flags for x86_64 compiles
922  Module adm1021: Add support for MC1066
923  Module bmcsensors: New
924  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
925                   kernel 2.5.43; fix 2.2 kernel compiles
926  Module gl518sm: Iterate allowed only for rev 0x00
927  Module i2c-amd756: Configure base address for nForce support;
928                     check for uninitialized base address;
929                     add support for amd8111 (SMBus 1.0)
930  Module i2c-amd8111: New (SMBus 2.0)
931  Module i2c-ipmb: New
932  Module i2c-ipmi: New
933  Module i2c-keywest: Sync with kernel 2.4.20
934  Module i2c-sis630: Add support for SiS730
935  Module i2c-sis645: Improve support for SiS645/961;
936                     add support for SiS645DX/961 and SiS735;
937                     fix 2.2 kernel compiles
938  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
939  Module lm87: Add multiple VRM version support
940  Module vt1211: Fix inx limits and alarms; fix in0
941  Module vt8231: Fix inx limits and alarms; fix in0
942  Module w83781d: Fix in0/in1 initialization
943  Module smartbatt: New
944  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
945  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
946                           stop decoding on checksum error
947  Program dmidecode: Fix read bug; upgrade to version 1.8
948  Program doc-insmod: Complete rewrite; fix author output
949  Program doc-features: Complete rewrite; handle missing sysctl entries;
950                        handle unknown prefix with suggestion
951  Program lm_sensors.init: Remove spaces bug; add green/red output
952  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
953  Program rrd: Add sanity limits to newly-created RRD.
954  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
955  Program sensors: Add support for MC1066, Rambus Rimms;
956                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
957                   initial support for Sony Vaio eeprom
958  Program sensors-detect: Add support for MC1066, smart battery, 8235,
959                          IPMI, AMD8111; add help if no sensors found;
960                          add ACPI method for IBM system detection;
961                          work with old Perl versions again;
962                          initial support for Sony Vaio eeprom
963
9642.6.5 (20020915)
965  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
966  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
967  Library: Fix fan3_div writes for w8378* and it87; add vt8231
968  Module dmi_scan: new
969  Module ds1621: Fix enable/disable
970  Module eeprom: Do not corrupt 24RF08's when checksum=1
971  Module i2c-i801: Check for uninitialized base address;
972                   enable if not enabled
973  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
974  Module i2c-sis630: new
975  Module i2c-sis645: new
976  Module lm92: Fix in-kernel initialization
977  Module via686a: Remove VT8231 support
978  Module vt8231: new
979  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
980  Program dmidecode: new
981  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
982  Program mkpatch: Add Config.in entries for, lm92,
983                   pcf8574, pcf8591, smsc47m1, vt1211;
984                   add dmi_scan
985  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
986  Program lm_sensors.init: fix stop()
987  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
988                   add support for logging loadavg in RRD;
989                   fix down-converting raw labels for RRD;
990                   update chip support, still behind sensors
991  Program sensors: Add /usr/local/etc to config file path;
992                   fix -c and -u flags; add vt8231
993  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
994                          refuse to run on IBM systems;
995                          fix sysconfig module numbering;
996                          change quick write to not corrupt 24RF08's
997
9982.6.4 (20020719)
999  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1000  File doc/vid: New
1001  File include/sensors_vid.h: New
1002  File sensors.conf.eg: Add vt1211, smsc47m1
1003  Library: Add multiple VRM version support for adm1025, w83781d;
1004           fix 'flex scanner jammed' on some systems;
1005           add vt1211, smsc47m1, lm92;
1006           fix access mode checking
1007  Makefiles: For 2.4+ kernels, modules now install in
1008             kernel/drivers/[i2c,sensors] , not misc/ , and
1009             'make install' removes old versions in misc/ .
1010             Use $CFLAGS and $CPPFLAGS if defined.
1011  Module adm1025: Add multiple VID version support
1012  Module ds1307: new
1013  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1014                     reliability improvements
1015  Module i2c-hydra: Flush posted writes
1016  Module i2c-i801: Add support for 82801DB (ICH4)
1017  Module i2c-i810: Flush posted writes
1018  Module i2c-savage4: new
1019  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1020  Module i2c-voodoo3: Flush posted writes
1021  Module ds1307: New
1022  Module lm92: New
1023  Module smbus-arp: new
1024  Module smsc47m1: new
1025  Module via686a: Add support for VT8231 sensors
1026  Module vt1211: new
1027  Module w83781d: Add multiple VID version support; fix temp alarms
1028  Program eeprom: new
1029  Program i2cdump: Add smbus block command specification, add PEC support
1030  Program lm_sensors.init: new
1031  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1032                   pcf8574, pcf8591, smsc47m1, vt1211
1033  Program p4b_smbus: Add support for ICH4
1034  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1035  Program sensord.init: Renamed, was prog/init/sensors
1036  Program sensord: Major update, now requires rrd source;
1037                   not compiled by default
1038  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1039                   (don't display algo. and adap.) option;
1040                   add vt1211, smsc47m1, lm92
1041  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1042                          add 82801DB, LM85; fix perl warnings;
1043                          generate /etc/sysconfig/lm_sensors for
1044                          lm_sensors.init script
1045
10462.6.3 (20020322)
1047  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1048  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1049  File doc/chips/it87: add more temp_type help
1050  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1051                        add adm1021 section; add lm87 AIN[1,2] template;
1052                        swap negative voltage limits for 782d,783s,627hf,
1053                        697hf,it87; add more it87 help; swap neg. voltage
1054                        limits for lm78(-j), lm79, w83781d, as99127f
1055  Library: Add PCF8591, W83697HF, ADM1023 support;
1056           fix w83* fan_min computes;
1057           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1058  Module adm1024: Add MODULE_LICENSE("GPL")
1059  Module bt869: Add s-video out and DVD resolution support
1060  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1061  Module fscscy: implement min/max for voltages and fans
1062  Module i2c-amd756: Add support for AMD768
1063  Module i2c-i810: Add support for 810E
1064  Module i2c-keywest: Big update, sync with kernel 2.4.18
1065  Module i2c-piix4: Check for uninitialized base address
1066  Module i2c-sis5595: Blacklist 645, 735
1067  Module i2c-viapro: Check for uninitialized base address
1068  Module gl518sm: Standardize /proc entries in0-3
1069  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1070               fan -> fan1; fix temp2 limit writes
1071  Module pcf8574: Add support for PCF8574A; /proc interface changed
1072  Module pcf8591: new
1073  Module sis5595: Blacklist 645, 735
1074  Module w83781d: Add W83697HF support; allow force_subclients parameter
1075                  for Tyan 2460
1076  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1077  Program decode-vaio.pl: new
1078  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1079                   add text output
1080  Program init/sensors: New SysV init script
1081  Program mkpatch.pl: Add support for fscscy, add more help entries
1082  Program p4b_smbus: new
1083  Program rrd: Install summ_week.cgi
1084  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1085                   clean up chassis intrusion prints
1086  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1087                          fix Via686a and it87 detection;
1088                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1089                          fix uninitialized values; it87 beats lm78
1090
10912.6.2 (20011118)
1092  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1093  Chip Modules (all): malloc.h -> slab.h
1094  Modules (all): Add MODULE_LICENSE("GPL")
1095  File doc/FAQ: More updates and additions
1096  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1097  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1098           update it87 alarm ID's.
1099  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1100  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1101  Module i2c-amd756: Improve busy handling/printk's
1102  Module i2c-i801: Add 82801CA/CAM support
1103  Module i2c-keywest: Sync with PPC people, it works now
1104  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1105  Module i2c-viapro: Add Via VT8233 support
1106  Module it87: Merge alarm_* /proc entries to alarms
1107  Module sis5595: Fix support for rev B0
1108  Module via686a: Make limit initializations reliable
1109  Module w83781d: Allow init=0 parameter to bypass initialization
1110  Program isadump: Add flat address space (PCI) support
1111  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1112                      fscpos, it87, maxilife, mtp008
1113  Program sensors: Fix w83781d temp precision
1114  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1115                          Fujitsu Poseidon and Scylla,
1116                          Intel 82443MX and 82801CA/CAM detection,
1117                          add ITE 8172G detection (driver in kernel 2.4.10)
1118
11192.6.1 (20010830)
1120  File BUGS: Updated
1121  File doc/FAQ: More updates and additions
1122  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1123  File sensors.conf.eg: Fix/enhance it87 section
1124  Library: ds1621 and it87 updates
1125  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1126  Module i2c-amd756: Add AMD 766 support
1127  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1128  Module i2c-piix4: Add Serverworks CSB5 support
1129  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1130  Module adm1025: Fixed temp2 min/max writes
1131  Module ds1621: Add 12-bit precision mode
1132  Module it87: Enable all alarms, add in8 support, add sensor type selection
1133  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1134                  remove support for module
1135  Module sis5595: Recognize unsupported chips and refuse to load
1136  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1137  Program eepromer: new
1138  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1139                      of sensors.c as a module in kernel
1140  Program sensors: it87 updates; adjust temp. precision for some chips
1141  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1142                          recognize unsupported SiS chips;
1143                          recognize AMD 766 and Serverworks CSB5.
1144
11452.6.0 (20010612)
1146  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1147        If your make fails because it can't find <linux/i2c-proc.h>, you
1148        forgot this step!!!
1149  File doc/FAQ: Many, many updates and additions
1150  File doc/busses/i2c-sis5595: new
1151  File doc/busses/i2c-tsunami: new
1152  File doc/chips/it87: new
1153  File doc/chips/via686a: Claim support for 686b.
1154  File README.thinkpad: new
1155  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1156                        Add lm87, adm9240, ds1780, lm81 templates;
1157                        Enhance help comments in file;
1158                        Add Tyan S2510 dual-MTP008 example;
1159                        Make separate sis5595 section.
1160  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1161  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1162  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1163           Add support for maxilife-nba and amd1024;
1164           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1165  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1166  Chip Modules (all): Change from sensors_* to i2c_* globals
1167                      for new i2c-proc.[ch]
1168  Makefiles: enhance to support Alpha architecture
1169  Module adm1021: Fix lm84 and gl523sm support
1170  Module adm1024: new
1171  Module i2c-i801: Chip detection cleanup
1172  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1173  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1174  Module i2c-tsunami: New
1175  Module i2c-via: Ensure i2c bus is tristated correctly.
1176  Module it87: new driver for IT8705, IT8712, Sis950 chips
1177  Module lm78: Recognize chipid=0x20
1178  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1179  Module mtp008: Fix temp initializations;
1180                 Save BIOS pin configuration of temps and fans;
1181                 Fix sensor type reads/writes and fan min writes;
1182                 Fix spurious invalid sensor type messages
1183  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1184                  used for patched kernel now.
1185                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1186  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1187                  Allow force_addr=0xaddr
1188  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1189  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1190                  reading changes; Add messages for subclient
1191                  registration failure
1192  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1193  Program i2cset: new
1194  Program isadump: fix for Alpha arch. compiles
1195  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1196                      Remove ltc1710; Fix i2c_sis5595 typo;
1197                      Support kernel 2.4.5 makefile change;
1198                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1199  Program sens_update_rrd: new
1200  Program sensord: Add -d (debug) and -p (pid-file) options
1201  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1202                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1203                   Change mtp008 temps from max/min to limit/hyst;
1204                   Add maxilife-nba, adm1024, it87 support.
1205  Program sensors-detect: Recognize lm78 with chipid=0x20;
1206                          Recognize SMSC Victory66 South Bridge;
1207                          Add devfs /dev/i2c/x support;
1208                          Add adm1024, it87xx support; Add thinkpad warning.
1209  Program tellerstats: new
1210
12112.5.5 (20010115)
1212  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1213        you have kernel 2.4.0-prerelease or greater.
1214  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1215  File doc/developers/proc: new
1216  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1217  Library: Add ds1621, mtp008 support
1218  Module adm1021: Add support for adm1021a / adm1023
1219  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1220  Module adm1025: Add support for remote temp; rename /proc entries to
1221                  in[0-5] and temp[1-2]; fix negative temp readings
1222  Module adm9240: Rename /proc entries to in[0-5]
1223  Module ddcmon: allow force and force_ddcmon parameters
1224  Module ds1621: new
1225  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1226  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1227  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1228  Module lm87: cleanup, update voltage calculations
1229  Module mtp008: new
1230  Module pcf8574: change update time to 5 seconds
1231  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1232  Module w83781d: fix beep setting via /proc
1233  Programs editticket, readticket: new
1234  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1235  Program mkpatch.pl: more fixes; now adds many more modules
1236  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1237                   add adm1025 temp2; report temp limits correctly as
1238                   min/max or limit/hysteresis; print message if no
1239                   sensors are found. Removed false errors from lm87 reads.
1240  Program sensors-detect: Add ds1621, mtp008 detection;
1241                          add ServerWorks detection
1242
12432.5.4 (20001012)
1244  Module i2c-viapro: Add support for Via 596B (0x3051)
1245  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1246  Program mkpatch.pl: fixed infinite loop
1247  Program sensors-detect: Detect Via 596B (0x3051)
1248
12492.5.3 (20001008)
1250  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1251  File useful_addresses.html: update
1252  Library: Add lm87 support
1253  Module pcf8574: new
1254  Module i2c-ali1535: new
1255  Module i2c-ali15x3: removed force #ifdef.
1256  Module i2c-i801: support Intel 82801BA (815E chipset)
1257  Module i2c-i801: add i2c block write support, fix smbus block bugs
1258                   (requires i2c 2.5.3 package)
1259  Module i2c-i810: support Intel 82815
1260  Module lm87: new
1261  Module sensors: Fix for kernel 2.4.0-test8
1262                  (remove copy_to_user_ret and put_user_ret)
1263  Module w83781d: limit fan divisors to 8 max. for as99127f
1264  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1265  Program i2cdump: Add smbus block read support
1266  Programs i2cdetect, i2cdump: Improve error reporting
1267  Program sensors: new switch -u (--unknown)
1268  Program sensors-detect: detect Intel 82801BA (815E chipset)
1269  Program sensors-detect: detect Intel 82815
1270  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1271  Program sensors-detect: detect National LM87
1272  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1273  Program sensors-detect: Improve error reporting
1274
12752.5.2 (20000709)
1276  File sensors.conf.eg: Fix lm80 in8 calculation
1277  Module w83781d: W83783S no longer crashes on unloading
1278  Program sensors-detect: more robustness in case of unknown i2c adapters
1279  Program sensors-detect, libsensors: fix eeprom size reporting
1280  Program sensord: more flexibility, support for alarm scanning etc.
1281  Program sensors: support for ignore setting on sensor alarms.
1282  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1283
12842.5.1 (20000618)
1285  Library: Add adm1025 support
1286  Module adm1025: new
1287  Module ddcmon: Fixed bus scan which could hang SMBus
1288  Module i2c-keywest: new
1289  Module maxilife: Add support for Maxilife '99 (NBA)
1290  Module via686a: Enable sensors if not enabled by BIOS
1291  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1292  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1293  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1294  Module w83781d: Fis as99127f fan speed (was 66% too high)
1295  Module w83781d: Improve beep input checking
1296  Program i2cdump: Add Winbond-style bank selection
1297  Program isadump: Add Winbond-style bank selection
1298  Program sensors: Add adm1025 support.
1299  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1300  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1301  File sensors.conf.eg: Add Maxilife '99 entries
1302  File sensors.conf.eg: Remove some as99127f entries.
1303    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1304          won't reinstall it) or else 'sensors -s' will fail.
1305
13062.5.0 (20000312)
1307  Dropped all kernel 2.0 and 2.1 compatibility
1308  Module i2c-i810: new
1309  Module ddcmon: new
1310  Module via686a: new
1311  Module i2c-amd756: fixed region request
1312  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1313  Module w83781d: Don't change pin settings at initialization;
1314                  also fix chip detection.
1315  Library: Support for ddcmon and via686a
1316  Program sensors-detect: Support for ddcmon and via686a
1317  Program sensors: Support for eeprom, ddcmon and via686a
1318
13192.4.5 (20000116)
1320  Introduced DESTDIR installation prefix
1321  Module lm80: fixes, temperature now read and set correctly
1322  Module i2c-voodoo3: driver enhancements
1323  Module w83781d: fixes, AS99127 works much better now
1324  Library: New ignore keyword in config file
1325  Programs: Support for new ignore keyword
1326  Program sensors-detect: Support for MGA detections
1327
13282.4.4 (19991201)
1329  Addition of the alpha release of AMD 756 SMBus host support.
1330  Many fixes and updates to the gl518sm driver
1331  Updates and fixes for device detection
1332
13332.4.0 (19990920)
1334  Too much to list.
1335  i2c and smbus parts are split off to a separate i2c package.
1336  New drivers and other stuff.
1337
13382.3.4 (19990616)
1339  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1340  All: Now compiles against kernel 2.0.x (again ;)
1341  Module gl518sm: some updates and refinements
1342
13432.3.3 (19990603)
1344  All: Now compiles against kernel 2.3.x (x >= 1)
1345  Module i2c-voodoo3: Timing issue fixes
1346  Module bt869: Seems to be functional and relatively well tested
1347  Many modules were modified to be more compatible with the new
1348   Mutex structure in the new experimental kernels.
1349
13502.3.2 (19990507)
1351  Module i2c-hydra: Now compiles on 2.0.x kernels
1352  Module i2c-lm75: Slightly better detection
1353  * New, but not compiled by default:
1354  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1355  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1356
13572.3.1 (19990501)
1358  All: Now compiles on PPC
1359  Module i2c-hydra: NEW
1360  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1361  Module w83781d: Removed deadlock (mutex was not initialized)
1362  Documentation: A few glitches removed
1363  Makefile: default module installation directory is now
1364            /lib/modules/current/extra/misc
1365  Program sensors-detect: PPC Hydra now detected
1366  Program sensors: Now prints complete GL518SM information
1367  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1368
13692.3.0 (19990422)
1370  All: Many, many changes and improvements
1371  All: Many small bugs and problems removed
1372  Modules: New insmod parameters
1373  Modules: Much improved chip detection
1374  Module maxilife: NEW
1375  Module adm1021: MAX1617A now also supported
1376  Module adm9240: DS1780 now also supported
1377  Module w83781d: W83782D and W83783S now also supported
1378  Program sensors-detect: NEW
1379  Library: All chips now supported
1380  Documentation: Very much improved
1381
13822.2.2 (199903??)
1383  Just some minor updates and bug fixes.
1384
13852.2.1 (19990218)
1386  All: Removed compile warnings
1387  Module i2c-dev: Small bug removed if DEBUG=1 was used
1388  Module sis5595: Now compiles for 2.0 kernels
1389  Module adm1021: Detection corrected
1390
13912.2.0 (19990216)
1392  All: Set copyrights to include 1999
1393  All: Small bugfixes
1394  I2C: Upgraded to newest archive of Simon Vogl
1395  Module i2c-dev: NEW
1396  Module i2c-ali15x3: NEW
1397  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1398     directories, and somewhat improved
1399  Module sis5595: NEW
1400  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1401  Library: Support for new chip drivers, several small bugs fixed
1402  Library manual pages: NEW
1403  Program i2cdetect: Moved to detect directory
1404  Program detect.pl: NEW
1405  Program doc-features: NEW
1406  Program sensors: Added man-page
1407  Document BUGS: Added cdrom bug and kernel i2c conflict
1408
14092.1.2 (19990116)
1410  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1411  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1412  Documentation in doc/kernel: NEW
1413
14142.1.1 (19990107)
1415  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1416                     and older
1417  Module gl518sm.o: Miscelaneous bugs and problems solved
1418  Program isadump: NEW
1419
14202.1.0 (19981230)
1421  Library: Completely NEW
1422  Program sensors: NEW
1423  Program grab_busses: NEW
1424  Program decode-dimms: More information
1425  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1426  Module w83781d.o: NEW
1427  Module lm80.o: NEW
1428  Module gl518sm.o: new procfile beep, several small updates
1429  Modules: Now use pin readings, no more scaling within the kernel (use the
1430           library instead)
1431
14322.0.2 (19981214)
1433  Module eeprom.o: NEW
1434  Program decode-dimms: NEW
1435  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1436           2.1.58
1437  Modules: Somewhat less verbose on transfers
1438  Module lm78.o now recognizes and handles lm78-j and lm79
1439
14402.0.1 (1998121?)
1441  Module gl518sm.o updates, to make it actually work
1442  Module lm75.o high/low-byte swapping write bug fixed
1443
14442.0.0 (19981209)
1445  Initial release
Note: See TracBrowser for help on using the browser.