root/lm-sensors/trunk/CHANGES @ 4133

Revision 4133, 71.9 KB (checked in by khali, 9 years ago)

The adt7463 may not have in4 (#2119)

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
42.10.1 (2006????)
5  File doc/busses/i2c-piix4: Update (2.6 backport)
6  File doc/developers/sysfs-interface: Update
7  File etc/ Add an smsc47m192 section
8                            Comment out all set statements
9                            Add an it8716 section
10                            Add a w83793 section
11  Library: Fix device scan when no i2c support is present
12           Add support for W83627EHF voltage inputs and alarms
13           Add support for the smsc47m192 driver
14           Fix all memory leaks (yeah!)
15           Fix no sensors being reported as an error
16           Add support for the IT8716F and IT8718F chips
17           Add support for the W83793 chip (Yuan Mu)
18           Map the 2.6 adm1026's fan8 to fan0
19  Makefile: Don't grep autoconf.h on user-space targets
20            Fix depmod on non-running kernel version
21  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
22  Module i2c-amd756-s4882: Improve static semaphore initialization
23                           (2.6 backport)
24  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
25                   Add ICH8 support (2.6 backport)
26                   Fix block transaction poll loops (2.6 backport)
27                   Remove PCI function check (2.6 backport)
28                   Cleanups (2.6 backport)
29  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
30  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
31                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
32                    Drop the fix_hstcfg parameter (2.6 backport)
33  Module i2c-viapro: Fix compilation with kernels < 2.4.21
34                     Add VT8237A and VT8251
35  Module lm83: Add LM82 support (2.6 backport)
36  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
37                  Add specific alarm and beep defines for the W83791D
38  Module w83792d: Fix PWM range (2.6 backport)
39  Program Decode depending on the memory type
40                           Decode the manufacturing date to an ISO8601 date
41                           Add the memory size computation and provide brief
42                            timing characteritics for SDRAM/DDR/DDR2 memory
43                           Add memory size computation for Rambus memory
44                           Various output cleanups and fixes
45  Program Add /usr/sbin or /usr/local/sbin to $PATH if needed
46  Program i2cdetect: Add a mode to print adapter functionalities
47  Program i2cdump: Restore bank after bank switching
48                   Add new mode W (read word on even register addresses)
49  Program mkpatch: Fix typo breaking f71805f
50  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
51                   Add smsc47m192 support
52                   Add abituguru support (Hans de Goede)
53                   Fix memory leak when printing an unknown chip
54                   Add it8716 and it8718 support
55                   Make each it87 fan and fan div optional
56                   Print missing w83791d values
57                   Add w83793 support (Yuan Mu)
58                   The adt7463 may not have in4 (#2119)
59  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
60                          Add ATI IXP200/300/400 SMBus detection
61                          Prevent warning on 64-bit PCI addresses
62                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
63                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
64                           F75384S/M, F75387SG/RG and F81218D detection
65                          Add Winbond W83793R/G and W83627DHG detection
66                          Handle the W83791D driver difference between kernels
67                          Add nForce4 MCP04, MCP51 and MCP55 detection
68                          Add AMD Geode devices detection
69                          Add ITE IT8716F and IT8718F detection
70                          Add NatSemi/Winbond PC87427 detection
71                          Get driver information for busy addresses from
72                           sysfs (2.6 only)
73                          Drop the ISA IT87xxF detection
74                          Check i2c adapter functionalities before probing
75                          Add Intel ICH8 SMBus detection
76                          Add AMD K8 thermal sensors detection
77                          Simplify detection of SiS5595, VIA686 and VT8231
78                          Add Analog Devices ADM1033, ADM1034, ADT7462,
79                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
80                          Check for root user at startup
81                          Attempt to be slighly more user-friendly
82                          Add VT8237A and VT8251
852.10.0 (20060214)
86  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
87  File doc/busses/i2c-viapro: Update (2.6 backport)
88  File doc/chips/via686a: Update (2.6 backport)
89  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
90  File etc/ Do not set vrm by default
91  File i2c-dev.h: Fix union i2c_smbus_data definition
92                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
93                  Add missing parentheses around macros
94                  Drop I2C_FUNC_SMBUS_EMUL
95                  Drop I2C_FUNC_SMBUS_*_PEC
96                  Drop I2C_SMBUS_*_PEC
97  File sensors_vid.h: Drop default VRM
98  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
99           This is intentional.  Use if you still
100           need your memory SPD data.
101  Library: Big update to use libsysfs.  More TODO though.
102           Fix bus matching code for Linux 2.6 (Karsten Petersen)
103           Add f71805f, w83687thf support
104           Add platform drivers support
105           Fix sysctl warnings on x86_64
106           Restore vt1211 temp1
107  Makefile: Compile user-space programs with -Wundef
108  Module i2c-i801: Simplify the hardware PEC code
109                   Always set PEC mode explicitly before each transaction
110  Module i2c-i810: Documentation update, PCI IDs cleanup
111  Module i2c-keywest: Remove bus probing code (2.6 backport)
112  Module i2c-nforce2: Remove dead code (2.6 backport)
113                      Add the ID of the nForce4 MCP-04 (2.6 backport)
114  Module i2c-via: Remove dead code
115  Module i2c-viapro: Remove dead code
116                     Support I2C block read (2.6 backport)
117                     Code cleanups (2.6 backport)
118                     Improve debug register dump (2.6 backport)
119  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
120          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
121          i2c-sis645: Use pci_driver name to request I/O region; do
122                      not initialize i2c_adapter name to "unset" (2.6
123                      backport)
124  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
125                                              (2.6 backport)
126  Module adm9240: Cleanups (2.6 backport)
127  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
128  Module it87: Minor cleanups
129               Fix fan3_div setting bug (Anton V. Staaf)
130  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
131               Separate the register read function
132               Add PEC support for the ADM1032
133  Module via686a: Cleanups
134  Module w83627hf: Drop useless initialization step (2.6 backport)
135                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
136                   Fix alarms (Yuan Mu)
137                   Preserve fan min on fan div change (Yuan Mu)
138                   Properly handle W83627THF without VID (Yuan Mu)
139                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
140                   Add W83687THF support
141  Module w83781d: Drop W83697HF support (Grant Coady)
142  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
143                  Fix fan control mode (PWM/DC) reporting
144                  Fix fan div auto-adjust (Yuan Mu)
145                  Fix the subclient handling
146  Module w83l785ts: Minor cleanup (2.6 backport)
147  Module vt1211: Restore temp1
148  Modules vt1211, vt8231: Change default VRM to 9.1
149  Program Add lookup tables for manufacturer names
150                           Fix rounding error in PCxxxx speed computation
151                           Improve text output
152                           Improve speed under Linux 2.6
153                           Verify checksum before decoding anything
154                           Improve manufacturing location decoding
155                           Improve memory type detection
156                           Improve part number decoding
157  Program i2cdump: Drop now useless #ifdef tests
158                   Fix capability check for continuous byte mode
159  Program i2cget: New
160  Program i2cset: Add PEC support
161                  Fix argc check
162  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
163                                       Print the correct bus type if bus
164                                       functionality can be queried
165  Program isadump: Display the real addresses in flat mode
166  Program Silently skip already existing nodes
167  Program mkpatch: Include f71805f
168  Program sensord: Do not log algorithm names
169                   Drop EEPROM support (Aurelien Jarno)
170                   Add W83627EHF, F71805F/FG support
171                   Fix PC87365/PC87366 alarms
172  Program sensors: Drop free_the_label
173                   Fix compilation with uclibc (no iconv)
174                   Add f71805f, w83687thf support
175  Program sensors-detect: Drop algorithm names
176                          Do not rely on i2cdetect -l printing algo names
177                          Simplify adapter name matching mechanism
178                          New address for ADM1032, ADT7461
179                          Improve ADT7467, ADT7468 support
180                          Fix MAX6659 reported driver
181                          Add Fintek F71805F detection
182                          Add Analog Devices ADT7476 detection
183                          Add Intel 82845G detection
184                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
185                          Fix udev detection in some corner case
186                          Improve DS1621 detection
187                          Always prefer ISA access over SMBus access
1902.9.2 (20050906)
191  File doc/chips/*: Big update (2.6 backport)
192  Library: Drop ds1780-specific code (now use adm9240)
193           Fix memory leak in sensors_get_label()
194           Support /sys/class/hwmon (Linux 2.6.14+)
195           Limit stack usage in sensors_read_proc_chips()
196  Makefile: Detect 2.6+ kernels and check targets
197  Man page isaset.8: Fix typos
198  Module adm1031: Fix broken kfree() calls
199  Module i2c-ali1563: New (2.6 backport by Winbond)
200  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
201  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
202          w83627hf.c: Tag find function __init
203  Module lm93: Fix memory leak
204  Module smsc47m1: Fix PWM enable polarity on read
205  Modules w83627hf, w83781d: Allow setting fan divisor to 128
206  Program Support Linux 2.6 (Burkart Lingner)
207                           Added DDR/DDR2 frequency reporting in convenient
208                           form of DDRxxx PCyyyy
209  Program i2cdump: Properly handle short i2c block reads
210  Program Fix compile errors
211  Program mkpatch: Include i2c-ali1563
212                   Include w83792d
213  Program pwmconfig: Fix unsafe temporary file use
214  Program rrd: Support 2.6 kernels
215  Program sensord: Add support for w83637hf
216                   Support pc87360 (Henrik Brix Andersen)
217  Program sensors: Support the VAIO "VGN" prefix for eeprom
218  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
219                          Advertise the w83792d driver
220                          Improve IT8705F and IT8712F detection
221                          Merge LM82 and LM83 detection
222                          Add W83687THF detection
2252.9.1 (20050412)
226  File doc/busses/i2c-nforce2: Update
227  File doc/chips/it87: Update
228  File doc/chips/lm90: Update for adt7461
229  File doc/chips/mic74: New
230  File etc/ New sections for lm92 and w83792d
231  Library: Add support for 2.6 fscpos driver (Stefan Ott)
232           Fix sis5595 in4 (Aurelien Jarno)
233           Add support for 2.6 gl520sm driver (Maarten Deprez)
234           Add support for 2.6 bmcsensors driver (Yani Ioannou)
235           Add support for w83792d (Chunhao Huang/Winbond)
236           Add support for 2.6 adt7461 (James Chapman)
237           Add support for 2.6 lm92
238           Add support for 2.6 vt1211
239           Add preliminary support for 2.6 w83627ehf
240  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
241            Use -fno-strict-aliasing on all architectures
242  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
243  Module bmcsensors: Fix compile error
244                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
245  Module ds1621: Fix detection (Aurelien Jarno)
246  Module eeprom: Discard SPD-centric checksum module parameter
247                 Cleanup detection function (backport from Linux 2.6)
248  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
249  Module i2c-i801: Temporarily disable broken I2C block read
250  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
251                   Gelato)
252  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
253  Module i2c-viapro: Prevent repeated resets
254  Module it87: Improve Super-I/O detection
255               Limit I2C address range
256               Support VID on the IT8712F
257  Module lm75: Only initialize CMP/INT bit
258  Module lm78: Fix bug with setting negative temperature limits
259  Module lm85: Properly differentiate between ADM1027 and ADT7463
260               Add EMC6D102 support
261  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
262               Add limited ADT7461 support
263  Module lm93: Fix IN10 (+5V) scaling
264  Module mic74: New
265  Module w83627hf: Support secondary Super-I/O address
266                   Enable temp2 and temp3 if they are disabled
267  Module w83781d: Revert AS99127F temp2 and temp3 computation change
268                  Skip final initialization step for AS99127F chips
269  Module w83792d: New (Chunhao Huang/Winbond)
270  Program ddcmon: New; user-space replacement for the ddcmon driver
271  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
272  Program isadump: Handle Super-I/O keys
273  Program lm_sensors.init: Cleanups (Axel Thimm)
274  Program Add basic command-line interface
275  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
276  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
277                     Don't complain about read-only enable files (lm85)
278                     Fix handling of alternate config file name
279  Program sensord: Fix erroneous error message (Aurelien Jarno)
280                   Support sis5595 in4 (Aurelien Jarno)
281                   Support w83627thf
282                   Support the separate it8712 prefix (Aurelien Jarno)
283  Program sensors: Display sis5595 in4 (Aurelien Jarno)
284                   No errors on missing pc87360 fans
285                   Add gl520sm support (Maarten Deprez)
286                   Improve vt1211 error/ignore handling (Michael Carland)
287                   Support w83792d, w83627ehf
288  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
289                          Improve IT8705F and IT8712F detection
290                          Improve udev detection
291                          Fix DS1621 detection
292                          Add W83627EHF detection
293                          Add ATI SMBus detection
294                          Add VT1211 alias detection
295                          Warn if chip modules not found
296                          Add i2c-ipmi to list if bmcsensors is on it
297                          Add PC87591 detection
298                          Search for correct udev db file name
299                          Add nForce3 250Gb and nForce4 detection
3022.9.0 (20041228)
303  NOTE: Requires i2c-2.9.0 or newer!
304  File README.thinkpad: Update
305  File doc/chips/it87: Cleanups
306  File doc/chips/lm63: New
307  File etc/ Set via686a voltage limits
308  File kernel/chips/ Resync module list with mkpatch
309  File kernel/include/sensors_compat.h: Define __devexit_p if missing
310                                        (kernels 2.4.16 and older)
311  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
312                             and dec_use removed in release 2.8.0
313  Modules (all chip drivers): Remove owner from i2c_driver; pass
314                              controlling_mod to i2c_register_entry() again
315  Module bmcsensors: Support function 1/x
316  Module i2c-amd756: Display the real bus name
317  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
318  Module i2c-i801: Support i2c block read (ICH5 and higher)
319                   Add PEC support for ICH6
320                   Add support for ICH7
321  Module i2c-ipmb: Remove from build since it doesn't work
322  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
323  Module icspll: Fix compilation
324  Module lm63: New driver for the National Semiconductor LM63
325  Module lm83: Use signed types for temperatures
326               Check limits on register writes
327  Module lm87: Round voltages properly
328               Retry on read errors (David Knierim)
329               Less agressive init (no reset)
330  Module lm90: Use signed types for temperatures
331               Check limits on register writes
332  Module lm93: Added module parameter for VID pin input thresholds.
333               Fix typo in dynamic VID alarms
334               Adds a couple log messages for failed transactions (David
335               Knierim)
336               Fix compilation breaking C99-ism (Axel Thimm)
337               Fix block read retries
338  Module pc87360: Support secondary Super-I/O address
339  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
340  Library: Add lm63 support
341           Add lpc47b397 support
342  Programs *.init: Rename lockfile to match file name
343  Programs i2cset, isaset: Written byte/word can be masked
344  Program Find eeproms on non-0 i2c bus too
345  Program mkpatch: Include i2c-amd756-s4882
346  Program pwmconfig: Handle new (well, back to old) pwm files names for
347                     Linux 2.6.10 and up
348  Program sensord: Do not scale load average (Aurelien Jarno)
349  Program sensors: Add lm63, lpc47b397 support
350                   Support DDR2 memory module EEPROMs (Rudolf Marek)
351                   Support only one location for the default configuration file
352                   Display the default configuration file location in --help
353                   Simplify the configuration file opening code
354  Program sensors-detect: Improve LM63 detection
355                          Discard IBM Thinkpad detection code
356                          Add PCA9556, LPC47B397, ICH7 detection
357                          Fix W83792D detection, add W83791SD detection
3602.8.8 (20041007)
361  File doc/donations: Update
362  File doc/lm_sensors-FAQ.texi: Add 4.6.1
363                                Update 4.7
364  File doc/chips/gl518sm: Update "iterate" info
365  File doc/chips/it87: Discard outdated module parameters
366  File doc/chips/lm75: LM77 is not supported
367  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
368  File doc/chips/lm93: New
369  File doc/chips/w83l785ts: Improvements
370  File etc/ Fix it87 lines order
371                            Update lm87 section
372  File kernel/include/sensors_vid.h: Support VRM 10.0
373  Library: Support 2.6 adm1025
374           Preliminary support for 2.6 lm87
375           Support 2.6 adm9240
376           Allow an alternative sysfs file name for chip features (2.6)
377           Fix lm83 critical limits (2.6)
378           Add lm93 support
379           Prevent some procfs errors from being silently ignored
380  Makefiles: Implement user_uninstall (Rudolf Marek)
381             Spoof LOGNAME and HOSTNAME when making html man pages
382  Module adm1025: Refine detection
383                  Update limit registers again (revert of 2.8.1)
384                  Init high limits if they read 0
385                  Fix conversions
386  Module lm75: Refine detection
387  Module lm78: Fix init
388  Module lm83: Default to kind lm83 if forced.
389               Fix temperature macros.
390  Module lm90: Add LM86, MAX6657 and MAX6658 support
391  Module lm93: New
392  Module mtp008: Fix the setting of limits on temp2
393  Module pca9540: Refine detection
394  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
395                  Support VID
396                  Fix fan_div file when fan count is less than 3
397                  Additional init and debug
398  Module smsc47m1: Fix pwm_enable being inverted
399  Module w83627hf: Add alternate VCORE/in0 calculation method
400                   Remove reset of chip by driver on initialization
401  Module w83781d: Fix default VRM for w83791d
402  Module w83l785ts: Implement read error handling (backport from 2.6)
403  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
404                    Wait for user input to continue (as opposed to 5 sec
405                    delay), can be skipped with -y
406                    Various cleanups and code refactoring
407                    Update manual pages
408  Program fancontrol.init: New (Dean Takemori)
409  Program Restore fans on many kinds of errors/interrupts
410  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
411                           (Giuseppe Della Bianca)
412  Program Detect devfs and refuse to run
413                    Use mknod's mode instead of chmod
414  Program mkpatch: Include xeontemp and pc87360
415  Program sensors: Rework adm1025 support
416                   Display pc87365/pc87366 VID
417                   Improve smsc47m1 support
418                   Hide 2.6 adm1027 alarm_mask being missing
419                   Print VRM version for all supported chips
420  Program sensors-detect: Support LM93, LM77, LM63
421                          Support PC8739x Super-I/O family (no sensors)
422                          Fix PCA9540 support
423                          Refine ADM1025/ADM1025A detection
424                          Refine LM75 detection
425                          Ignore missing /proc/modules (Andras Bali)
426                          Script-wide Perl cleanups
427                          Support udev
428                          Support W83792D, LM96000
4312.8.7 (20040611)
432  File README.thinkpad: Update 24RF08 status
433  File doc/fan-divisors: More info on accuracy
434  File doc/lm_sensors-FAQ.texi: Update 4.27
435  File doc/chips/adm1031: New
436  File doc/chips/max1619: New
437  File doc/chips/pc87360-fan: Renamed to pc87360
438  File doc/chips/pc87360: Big update
439  File doc/chips/w83781d: Update AS99127F documentation
440  File etc/ Add comments about BP6 voltages
441                            Add comment on Asus A7V8X-X VCore
442                            Misc fixes to lm80 section
443                            Update via686a section
444                            New lm99 section
445                            Add section for LM85-like chips
446                            Preliminary pc87366 section
447                            Add comment on GL520SM application modes
448                            Document beep_enable (Aurelien Jarno)
449                            Preliminary max1619 section
450                            Preliminary adm1030 and adm1031 sections
451  Library: Fix 2.6 VRM
452           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
453           Fully support the PC87360 family
454           Support the lm99
455           Add version and date strings
456           Support 2.6 max1619
457  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
458  Man page i2cdetect.8: document new command line flags
459  Man page i2cdump.8: More details on how i2cdump can write to a chip
460  Modules (all chip drivers): Rework memory allocation scheme.
461  Module adm1031: New (Alexandre d'Alton)
462  Module bmcsensors: Fix oops by creating thread for initialization
463  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
464  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
465          asb100.c, lm92.c: Use swab16
466  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
467  Module gl520sm: Less agressive initialization process
468                  Fix temp1 limits being unsettable in application
469                  Ensure that temp2 and in4 are not used at the same time
470  Module i2c-i801: Support 6300ESB and ICH6
471  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
472  Module i2c-sis645: Add support for SiS655
473  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
474  Module lm90: Support LM99 and LM89
475  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
476               Get rid of useless i2c_probe call
477  Module max1619: New (Alexey Fisher)
478  Module p4b_smbus: Add support for mobile versions of the 82801
479                    (Axel Thimm)
480  Module pc87360-fan: Renamed to pc87360
481  Module pc87360: Also support PC87365 and PC87366
482                  Add write support
483                  Correctly set the chip name depending on the type
484                  Add voltage and temperature support
485                  Fix fan speed computation
486                  Retrieve fans configuration from Super-I/O space
487                  Export pwm_enable (read-only)
488                  Honor pwm invert bits
489                  Clear fan alarms after we read them
490                  Do not read fan data when monitoring is disabled
491                  Do not include SENSORS_INSMOD stuff
492                  New module parameter: init
493                  Fan clock dividers change automatically
494                  Add thermistor dupport
495  Module smsc47m1: Lock on reads and writes
496                   Various PWM fixes
497  Module thmc50: Fix address range
498  Module via686a: Fix voltage roundings
499                  Simplify temperature conversions
500  Module w83781d: Drop PWM support for as99127f
501                  Invert AS99127F beep bits in driver rather than user-space
502  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
503  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
504  Program New
505  Program i2cdetect: Adapt probing method to address
506                     Add -q and -r flags to force probing methods
507                     Allow probing range selection
508  Program isadump: Major improvements
509  Program isaset: New
510  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
511                   module
512                   Include i2c-nforce2
513  Program sensord: New --rrd-no-average parameter
514                   Syncronize time slots with rrd
515                   Fix W83781D temp3 alarm (Aurelien Jarno)
516                   Add ASB100 support (Andrew May)
517  Program sensors: Fully support the PC87360 family
518                   Fix lm80 temperature alarms
519                   Support the lm99
520                   Do not invert AS99127F beep bits anymore
521                   Fix W83781D temp3 alarm (Aurelien Jarno)
522                   Print library version string
523  Program sensors-detect: Rework Super I/O detection
524                          Support SiS655/SiS96x
525                          Support ADT7461 and ADT7467
526                          Better support for ADM1027, ADT7460 and ADT7463
527                          Explicitly support ADM1028
528                          Scan all logical devices of PC87365 and PC87366
529                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
530                          Detect eeproms with software write protect (not
531                          enabled by default)
532                          Support ALi 1563 (2.6 only)
533                          Drop LTC1710 support
534                          Use byte reads for probing on ranges 0x30-0x37 and
535                          0x50-0x5F
536                          Improve LM89 and LM99 support
537                          Support GeForce FX 5900 video cards
538                          Fix devfs misdetection (Aurelien Jarno)
539                          Detect 6300ESB, ICH6
540                          Fix double detection of ISA chips
541                          Support MAX1619
542                          Support PC87373 Super-I/O
543                          Fix unknown adapters appearing multiple times
544                          Refine MAX6650/MAX6651 detection
5472.8.6 (20040405)
548  File README.thinkpad: Update status
549  File doc/chips/pca9540: New
550  File doc/chips/pc87360-fan: New
551  File etc/ Update pcf8591 default configuration
552  Library: Switch to new sysfs naming standard
553           Fix gcc 3.3 warnings (Philipp Thomas)
554           Support 2.6 ds1621 and pcf8591
555           Change pcf8591 magnitudes
556           Support pc87360-fan
557  Makefile: Install shared library 755
558  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
559  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
560  Modules ds1621, pcf8591: Check for capabilities before using them
561                           (Aurelien Jarno)
562  Modules pcf8574, pcf8591: Cleanups
563  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
564  Module adm1021: Better detection and initialization
565  Module pca9540: New driver for the Philips PCA9540
566  Module pc87360-fan: New driver for the National Semiconductor PC87360,
567                      PC87363 and PC87364 Super I/O chips
568  Module smsc47m1: Support the LPC47B27x
569  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
570  Program i2cdetect: Skip special addresses by default
571  Program sensord: Prevent null pointer dereference (Tim Toohey)
572  Program sensors: Print the degree symbol in the terminal's current locale
573                   (Aurelien Jarno)
574                   Update pcf8591 print to support 2.6 driver
575                   Support pc87360-fan
576  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
577                          Improved SiS chips support
578                          Add a white list of IBM systems
579                          Drop support of undetectable adapters
580                          Fix smart battery detection
581                          Add smart battery charger and manager detection
582                          Rework adm1021 and clones detection
583                          The PC87360, PC87363 and PC87364 Super I/O chips
584                          now have a (preliminary) driver
585                          Rework Super I/O detection
586                          Better support of devfs
587  Program New
5902.8.5 (20040305)
591  File doc/chips/SUMMARY: Update
592  File etc/ Epox 8K3A tweaks. (Kronos)
593  Makefiles hotplug and rrd: Remove -o and -g arguments to install
594  Module bmcsensors: Increase max SDRs to 100
595  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
596  Module i2c-amd756: Don't register driver to avoid driver conflicts.
597                     (Daniel Rune Jensen)
598  Module it87: Better temperature sensor types handling (Takeru Komoriya)
599               Fix reset=1 (Takeru Komoriya)
600  Module lm80: Code cleanups
601  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
602  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
603  Module w83627hf: Add w83637hf support
604                   Fix exported name
605                   Fix PWM in w83627thf
606                   Preserve other bits when forcing temp2/3 to comparator mode
607  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
608                  Remove asb100 support
609  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
610          Define driver ID if i2c-id.h doesn't have it yet.
611  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
612          Backport oops fix from Linux 2.6.
613  Modules (all chips): Get rid of useless headers
614  Program Add sysfs support
615  Program sensors: Add w83637hf support
616                   Add support for Shuttle Ethernet EEPROMs
617                   Drop 2.6 subclient detection
618  Program sensors-detect: Add heuristics to the LM80 detection function
619                          Add support for W83L785R, improve W83L784R/AR
620                          Add GeForce FX 5600 as supported by rivatv
621                          More Super IO chips, better handling
622  Library: Update to match renames in fscher
623           Reverse temporary changes to w83l785ts mappings
624           Fix vt1211 and vt8231 uch_config not being writable
625           Add 2.6 lm80 support
626           Add w83637hf support
627           Remove in6 and temp1 from vt1211 and vt8231
628           Add support for Shuttle Ethernet EEPROMs
629           Remove unused as99127f features
6322.8.4 (20040207)
633  File doc/lm_sensors-FAQ.texi: Update 4.20.
634  File doc/chips/it87: Change hyst to low
635  File doc/chips/w83l785ts: New
636  File etc/ Change it87 hyst to low
637                            Fix w83697hf supposed to have temp3
638                            Limits initialization for adm1025/ne1619
639                            Handle fscher voltage conversions
640                            Add Tyan Trinity S2495 KT400 setup (Eric
641                              Schumann)
642                            Fix fscher fan labels (Reinhard Nissl)
643  Library: Better 2.6 eeprom support
644           Change it87 hyst to low
645           Add 2.6 gl518sm, fscher support
646           Fix 2.6 negative voltages handling
647           Temporary fix to w83l785ts mappings
648  Module adm1025: Separate prefix for NE1619
649  Module adm1026: Remove use of temporary ID
650                  Define addresses as a range
651  Module bmcsensors: Fix reservations
652  Module fscher: Externalize voltage conversions
653  Module eeprom: Remove memtype
654  Module i2c-piix4: Fix resource release error
655                    Various cleanups
656  Program Add sysfs support
657  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
658                   Drop linux 2.2 support
659                   Add w83627hf
660  Program sensors: Do not show algorithm by default
661                   Cleanup temperature unit display code
662                   Cleanup label spacing code
663                   Fix output to UTF-8 terms (Marcel Sebek)
664                   Simplify gl518sm print
665                   Do not ignore errors in FSC chips prints
666                   Fix w83l785ts print
667                   Cleanup FSC chips prints
668  Program sensors-detect: Fix PATH issues
669                          Correctly point to the fscher driver
6722.8.3 (20040115)
673  File lm_sensors.spec: Update
674  Library: Add 2.6 eeprom, lm90 support
675           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
676  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
677  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
678  Module i2c-amd756: Fix byte writes
679  Module i2c-tsunami: Cleanups (Daniel Nilsson)
680  Module it87: Fix sg_tlx writes; fix sensor type reporting;
681               add 8712 Super I/O detection;
682               remove initialization of temp_type and fan_ctl;
683               remove init and temp_type module parameters
684  Module lm90: Handle hysteresis differently
685  Module smartbatt: Fix detection, magnitudes, temp
686  Module w83781d: Fix negative voltages
687  Module w83l785ts: New
688  Program eeprog: Make 8 bit mode the default
689  Program fancontrol: Improvements, fixes, support 2.6 kernels
690  Program mkpatch: Add lm75.h
691  Program pwmconfig: Improvements, fixes, support 2.6 kernels
692  Program sensors: Add ASB100 support
693  Program sensors-detect: Add 8712 Super I/O detection;
694                          add W83L785TS detection
6972.8.2 (20031211)
698  IMPORTANT: Limit initialization removed from all chip drivers!
699             If you didn't run 'sensors -s' in the past you may need to now!
700  File Change lm75 scaling back to 1;
701                        Add example for asb100
702  Library: Fix bmcsensors scaling, increase number of sensors;
703           Add w83627thf support; Advance version to 3.0.0;
704           Add hermes, ADM1032, ASB100 support;
705           Add it87 sensor type support;
706           Add sysfs support for kernel 2.6;
707           Fix memory leaks
708  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
709             Fail if no kernel .config file exists;
710             Don't build module dependencies for user and user_install
711  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
712          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
713          smsc47m1, thmc50, via686a, w83627hf, w83781d:
714          Remove initialization of limits by driver.
715  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
716  Modules (chip): Init cleanups
717  Module asb100: New
718  Module bmcsensors: Fix voltage scaling, voltage and fan limits
719  Modules ddcmon, eeprom: Add failure printks
720  Module fscher: New (Fujitsu-Siemens Hermes driver)
721  Module i2c-amd756: Fix AMD8111 support
722  Module i2c-amd8111: Fix byte writes
723  Module i2c-nforce2: Fix byte writes
724  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
725  Module i2c-sis630: Sync with 2.6.0-X driver version
726  Module i2c-viapro: Add support for Via 8237
727  Module it87: Add pwm and "smart guardian" support;
728               add it87 sensor type support
729  Module lm75: Fix negative voltages
730  Module lm90: Add ADM1032 support
731  Module w83781d: Fix 791d and 627hf detection
732  Module w83627hf: Add VID support
733  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
734  Program eeprog: New
735  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
736                                       support sysfs for i2c bus search
737  Program i2cdetect: Add -l option to list busses
738  Program i2cdump: Add 'c' mode for consective address reads
739  Program mkpatch: Cleanups
740  Program pwmconfig: Handle multiple fans controlled by a single pwm
741  Program sensord: Remove ddcmon support
742  Program sensors: Add ADM1032 support; add messages for sysfs
743  Program sensors-detect: Prefer Super I/O drivers;
744                          Fix W83627HF and W83791D detection; detect CSB6;
745                          Detect ADM1029, ADM1030, ADM1031;
746                          Detect W83637HF, W83697UF;
747                          Add it87 sensor type support; add sysfs support
748                          Reduce lm80 misdetects; remove PCFxxxx "detection"
749                          Detect VT8237 (KT600)
750                          Use VPD instead of DMI+ACPI for Thinkpad detection
751                          Suggest new asb100 driver instead of w83781d
7542.8.1 (20031005)
755  NOTE: Requires i2c-2.8.1 or newer!
756  File Improved adm1025 section
757                        Default temp labels for as99127f
758                        Improved lm83 section
759                        Better support for Asus A7V8X-X
760  File doc/chips/SUMMARY: Add SMSC manufacturer ID
761  File doc/chips/adm1025: Add decent documentation (almost new)
762  File doc/chips/lm83: Known motherboards list update, misc updates
763  Library: Change adm1025 names (hyst/over become low/high)
764           Swap adm1025 temp1 and temp2 to match the driver's order
765           Advance version to 2.0.1
766           Update lm83 support
767           Add support for lm90, xeontemp, max6650
768           Add separate messages for read and write errors
769           Add missing message for parse error
771  Modules (various): Fix includes for compilation on Alpha
772                     Use the new i2c_delay function instead of the various
773                     do_pause functions
774  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
775  Module i2c-nforce2: Cleanups
776  Module i2c-i810: Use readl/writel for portable access to PCI memory
777  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
778  Module i2c-savage4: Use readl/writel for portable access to PCI memory
779  Module i2c-sis630: Fix detection
780                     Add block data read/write support
781  Module i2c-sis645: Detection method change/bugfix
782  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
783  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
784  Module adm1025: Major driver update
785                  Add support for Philips NE1619
786                  Simplify the driver a lot (unified voltages, unified
787                  temperatures and much more)
788                  Fix default voltage limits
789                  Change default temperature limits
790                  Swap remote and local temperatures to match the internal
791                  registers order (make the code unification possible)
792                  Export remote diode fault through alarms
793  Module ddcmon: Major update
794                 Add half a dozen new features
795                 Add checksum parameter (same as for the eeprom module)
796                 Fix monitor limits
797  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
798  Module lm78: Fix a fan_div/fan_min bug
799  Module lm83: Add t_crit and alarms support
800  Module lm90: New
801  Module max6650: New
802  Module saa1064: New
803  Module smsc47m1: Add support for 47M142
804  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
805                   enhance w83627thf support
806  Module w83781d: Enhance chip detection; clean up error returns;
807                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
808  Module xeontemp: New
809  Program Add Direct Rambus (DRDRAM)
810                           Mark Rambus as unsupported
811  Program New
812                          Interfaces between our eeprom module and
813                          parse-edid from the read-edid project
814  Program p4b_smbus: Fix SMP compilation
815  Program sensord: Add support for IT87 (Mike Black)
816                   Change ADM1025 support to match the changes made to
817                   the library
818  Program sensors: Rewrite and enhance EEPROM support
819                   Change LM83 and ADM1025 support to match the changes
820                   made to the library
821                   Add DRDRAM support to print_eeprom
822                   Exit(1) on /proc write failure (Malte Starostik)
823                   Add LM90, MAX6650 support
824  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
825                          Add support for LM82, LM86, LM89
826                          Improved W83781D family detection
827                          Add support for AS19927F rev.2, ASB100 Bach
828                          Add support for Asus Mozart-2 (3 types)
829                          Add support for NE1619
830                          Add support for FSC Hermes
831                          Make sure /sbin is in the user's path
832                          Fix EEPROM detection
833                          Automatic module.conf and /dev/i2c* detection
834                          Improve LM82 and LM83 detection
835                          Handle "to-be-written" cleanly
836                          Add detection for 47M14x Super I/O
837                          Handle the one-address-many-chips-same-driver
838                          case
8412.8.0 (20030714)
842  NOTE: Requires i2c-2.8.0 or newer!!!
843  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
844                  2.4.13 or later required for mkpatch.
845  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
846                  i2c package
847  File doc/chips/fscscy: Add watchdog documentation
848  File Fix vt1211/vt8231 thermistor calculations
849  File sensors.h: Now automatically generated
850  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
851           add adm1026, lm83, lm85, w83791d support;
852           Advance version to 2.0.0
853  Makefiles: Generate warnings if new library won't be found by;
854             Modules now install in kernel/drivers/i2c/[busses,chips];
855             Ensure that headers in /usr/local/include are used first;
856             Don't use /usr/include headers for modules;
857             Handle multiple UTS_RELEASE definitions in linux/version.h;
858             Automatically generate kernel/include/sensors.h;
859             Remove old gzipped modules; remove old misc directory if empty;
860             Remove pre-2.4 installation method;
861             -Wall now the default;
862             Add new targets user, user_install, and help;
863             Run depmod after module installation
864  Modules (all): Cleanups including
865                - Add #include <i2c-proc.h>
866                - C99 initializers
867                - Remove #ifdef MODULE
868                - Remove #ifndef THIS_MODULE
869                - Remove #ifndef MODULE_LICENSE
870                - Remove other 2.1/2.2 #ifdefs
871                - Remove #include "sensors.h", copy SYSCTL defs to module
872                - Remove excess #includes
873                - Remove argument in i2c_register_entry()
874                - Remove dummy xxx_command() definition
875                - Remove EXPORT_NO_SYMBOLS
876                - Remove init_MUTEX #define
877                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
878                  no longer adjust their own refcounts
879                - Use module_init() and module_exit()
880                - Update to new i2c_driver struct definition
881  Modules (bus PCI): Convert to PCI-module-style initialization
882  Modules (several): Add support for AMD Opteron VRM (VID) encoding
883  Module adm1021: Set alarm on failed reads and report old value;
884                  merge changes from kernel 2.5.54
885  Module adm1026: New
886  Module bmcsensors: Fix compile when DEBUG=1
887  Modules ddcmon, eeprom: Use i2c block reads if possible;
888                          better error handling
889  Module ds1307: Add to Makefile
890  Module gl520sm: Fix temperature over/hyst writes
891  Module lm75: merge changes from kernel 2.5.54
892  Module lm83: New
893  Module lm85: New
894  Module i2c-ali1535: Check for invalid transaction
895  Module i2c-ali15x3: Check for invalid transaction
896  Module i2c-amd756: merge changes from kernel 2.5.54;
897                     check for invalid transaction
898  Module i2c-amd8111: merge changes from kernel 2.5.54
899  Module i2c-i801: Add support for 82801EB (ICH5)
900  Module i2c-i810: Fix for some chips
901  Module i2c-nforce2: New
902  Module i2c-piix4: Check for invalid transaction
903  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
904  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
905        north bridges; SiS962 and SiS963 south bridges
906  Module i2c-viapro: Check for invalid transaction
907  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
908          pwm and pwm enable support; update docs
909  Module smbus-arp: Check adapter for HW or SW PEC support;
910                    add reset option
911  Module w83781d: Add support for w83791d
912  Module w83627hf: New
913  Program Recognize DDR and Rambus
914  Program eeprom: Fix writes for small eeproms
915  Program eeprom, eepromer: Use local i2c-dev.h for build
916  Program fancontrol: New
917  Program lm_sensors.init: Call sensors -s in start()
918  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
919                   Add adm1026,lm85 support;
920                   Remove sensors.c file; add sensors_compat.h;
921                   Remove patches to i2c-core.c and drivers/char/mem.c;
922                   Now works only for kernels 2.4.13 or later
923  Program p4b_smbus: Fix 'make install';
924                     Install in same place as other modules;
925                     Clear correct bits in config word
926  Program pwmconfig: New
927  Program sensors: add adm1026, lm85, w83791d support
928  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
929                          w83627hf, w83627thf, w83697hf);
930                          Add support for SiS651, SiS961, SiS745, SiS746;
931                          Support dmidecode 2.0 and later;
932                          Fix "C" format error;
933                          Add support for adm1026, 82801EB (ICH5), W83791D;
934                          Add support for w83l785ts, nForce2;
935                          Fix UTF-8 incompatibility;
936                          Better support for lm75;
937                          Add support for lm83
9392.7.0 (20021208)
940  NOTE: Requires i2c-2.7.0 or newer.
941  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
942  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
943  File doc/busses/i2c-sis645: Add license
944  File doc/chips/lm92: Add license, features
945  File doc/chips/maxilife: Add license, parameters, features
946  File doc/chips/smartbatt: Complete rewrite
947  File doc/chips/vt8231: Add license, parameters
948  File Add section for lm75; complete the lm78 section
949  Library: Add support for MC1066; add multiple VRM version support for lm87;
950           enhance adm1023 support; initial support for Sony Vaio eeprom;
951           add support for bmcsensors; add hacks for additional dummy drivers
952  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
953            add flags for x86_64 compiles
954  Module adm1021: Add support for MC1066
955  Module bmcsensors: New
956  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
957                   kernel 2.5.43; fix 2.2 kernel compiles
958  Module gl518sm: Iterate allowed only for rev 0x00
959  Module i2c-amd756: Configure base address for nForce support;
960                     check for uninitialized base address;
961                     add support for amd8111 (SMBus 1.0)
962  Module i2c-amd8111: New (SMBus 2.0)
963  Module i2c-ipmb: New
964  Module i2c-ipmi: New
965  Module i2c-keywest: Sync with kernel 2.4.20
966  Module i2c-sis630: Add support for SiS730
967  Module i2c-sis645: Improve support for SiS645/961;
968                     add support for SiS645DX/961 and SiS735;
969                     fix 2.2 kernel compiles
970  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
971  Module lm87: Add multiple VRM version support
972  Module vt1211: Fix inx limits and alarms; fix in0
973  Module vt8231: Fix inx limits and alarms; fix in0
974  Module w83781d: Fix in0/in1 initialization
975  Module smartbatt: New
976  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
977  Program Code cleanup; valid HTML; better HTML output;
978                           stop decoding on checksum error
979  Program dmidecode: Fix read bug; upgrade to version 1.8
980  Program doc-insmod: Complete rewrite; fix author output
981  Program doc-features: Complete rewrite; handle missing sysctl entries;
982                        handle unknown prefix with suggestion
983  Program lm_sensors.init: Remove spaces bug; add green/red output
984  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
985  Program rrd: Add sanity limits to newly-created RRD.
986  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
987  Program sensors: Add support for MC1066, Rambus Rimms;
988                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
989                   initial support for Sony Vaio eeprom
990  Program sensors-detect: Add support for MC1066, smart battery, 8235,
991                          IPMI, AMD8111; add help if no sensors found;
992                          add ACPI method for IBM system detection;
993                          work with old Perl versions again;
994                          initial support for Sony Vaio eeprom
9962.6.5 (20020915)
997  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
998  File Fix temp[23] for as99127f; add vt8231
999  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1000  Module dmi_scan: new
1001  Module ds1621: Fix enable/disable
1002  Module eeprom: Do not corrupt 24RF08's when checksum=1
1003  Module i2c-i801: Check for uninitialized base address;
1004                   enable if not enabled
1005  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1006  Module i2c-sis630: new
1007  Module i2c-sis645: new
1008  Module lm92: Fix in-kernel initialization
1009  Module via686a: Remove VT8231 support
1010  Module vt8231: new
1011  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1012  Program dmidecode: new
1013  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1014  Program mkpatch: Add entries for, lm92,
1015                   pcf8574, pcf8591, smsc47m1, vt1211;
1016                   add dmi_scan
1017  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1018  Program lm_sensors.init: fix stop()
1019  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1020                   add support for logging loadavg in RRD;
1021                   fix down-converting raw labels for RRD;
1022                   update chip support, still behind sensors
1023  Program sensors: Add /usr/local/etc to config file path;
1024                   fix -c and -u flags; add vt8231
1025  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1026                          refuse to run on IBM systems;
1027                          fix sysconfig module numbering;
1028                          change quick write to not corrupt 24RF08's
10302.6.4 (20020719)
1031  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1032  File doc/vid: New
1033  File include/sensors_vid.h: New
1034  File Add vt1211, smsc47m1
1035  Library: Add multiple VRM version support for adm1025, w83781d;
1036           fix 'flex scanner jammed' on some systems;
1037           add vt1211, smsc47m1, lm92;
1038           fix access mode checking
1039  Makefiles: For 2.4+ kernels, modules now install in
1040             kernel/drivers/[i2c,sensors] , not misc/ , and
1041             'make install' removes old versions in misc/ .
1042             Use $CFLAGS and $CPPFLAGS if defined.
1043  Module adm1025: Add multiple VID version support
1044  Module ds1307: new
1045  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1046                     reliability improvements
1047  Module i2c-hydra: Flush posted writes
1048  Module i2c-i801: Add support for 82801DB (ICH4)
1049  Module i2c-i810: Flush posted writes
1050  Module i2c-savage4: new
1051  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1052  Module i2c-voodoo3: Flush posted writes
1053  Module ds1307: New
1054  Module lm92: New
1055  Module smbus-arp: new
1056  Module smsc47m1: new
1057  Module via686a: Add support for VT8231 sensors
1058  Module vt1211: new
1059  Module w83781d: Add multiple VID version support; fix temp alarms
1060  Program eeprom: new
1061  Program i2cdump: Add smbus block command specification, add PEC support
1062  Program lm_sensors.init: new
1063  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1064                   pcf8574, pcf8591, smsc47m1, vt1211
1065  Program p4b_smbus: Add support for ICH4
1066  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1067  Program sensord.init: Renamed, was prog/init/sensors
1068  Program sensord: Major update, now requires rrd source;
1069                   not compiled by default
1070  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1071                   (don't display algo. and adap.) option;
1072                   add vt1211, smsc47m1, lm92
1073  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1074                          add 82801DB, LM85; fix perl warnings;
1075                          generate /etc/sysconfig/lm_sensors for
1076                          lm_sensors.init script
10782.6.3 (20020322)
1079  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1080  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1081  File doc/chips/it87: add more temp_type help
1082  File Un-ignore it87 in8, temp3, fan3;
1083                        add adm1021 section; add lm87 AIN[1,2] template;
1084                        swap negative voltage limits for 782d,783s,627hf,
1085                        697hf,it87; add more it87 help; swap neg. voltage
1086                        limits for lm78(-j), lm79, w83781d, as99127f
1087  Library: Add PCF8591, W83697HF, ADM1023 support;
1088           fix w83* fan_min computes;
1089           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1090  Module adm1024: Add MODULE_LICENSE("GPL")
1091  Module bt869: Add s-video out and DVD resolution support
1092  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1093  Module fscscy: implement min/max for voltages and fans
1094  Module i2c-amd756: Add support for AMD768
1095  Module i2c-i810: Add support for 810E
1096  Module i2c-keywest: Big update, sync with kernel 2.4.18
1097  Module i2c-piix4: Check for uninitialized base address
1098  Module i2c-sis5595: Blacklist 645, 735
1099  Module i2c-viapro: Check for uninitialized base address
1100  Module gl518sm: Standardize /proc entries in0-3
1101  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1102               fan -> fan1; fix temp2 limit writes
1103  Module pcf8574: Add support for PCF8574A; /proc interface changed
1104  Module pcf8591: new
1105  Module sis5595: Blacklist 645, 735
1106  Module w83781d: Add W83697HF support; allow force_subclients parameter
1107                  for Tyan 2460
1108  Programs, Update for new /proc names
1109  Program new
1110  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1111                   add text output
1112  Program init/sensors: New SysV init script
1113  Program Add support for fscscy, add more help entries
1114  Program p4b_smbus: new
1115  Program rrd: Install summ_week.cgi
1116  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1117                   clean up chassis intrusion prints
1118  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1119                          fix Via686a and it87 detection;
1120                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1121                          fix uninitialized values; it87 beats lm78
11232.6.2 (20011118)
1124  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1125  Chip Modules (all): malloc.h -> slab.h
1126  Modules (all): Add MODULE_LICENSE("GPL")
1127  File doc/FAQ: More updates and additions
1128  File Fix it87 in5,in6 (-12,-5) calculations
1129  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1130           update it87 alarm ID's.
1131  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1132  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1133  Module i2c-amd756: Improve busy handling/printk's
1134  Module i2c-i801: Add 82801CA/CAM support
1135  Module i2c-keywest: Sync with PPC people, it works now
1136  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1137  Module i2c-viapro: Add Via VT8233 support
1138  Module it87: Merge alarm_* /proc entries to alarms
1139  Module sis5595: Fix support for rev B0
1140  Module via686a: Make limit initializations reliable
1141  Module w83781d: Allow init=0 parameter to bypass initialization
1142  Program isadump: Add flat address space (PCI) support
1143  Program Add support for i2c-ali1535, adm1024, ds1621,
1144                      fscpos, it87, maxilife, mtp008
1145  Program sensors: Fix w83781d temp precision
1146  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1147                          Fujitsu Poseidon and Scylla,
1148                          Intel 82443MX and 82801CA/CAM detection,
1149                          add ITE 8172G detection (driver in kernel 2.4.10)
11512.6.1 (20010830)
1152  File BUGS: Updated
1153  File doc/FAQ: More updates and additions
1154  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1155  File Fix/enhance it87 section
1156  Library: ds1621 and it87 updates
1157  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1158  Module i2c-amd756: Add AMD 766 support
1159  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1160  Module i2c-piix4: Add Serverworks CSB5 support
1161  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1162  Module adm1025: Fixed temp2 min/max writes
1163  Module ds1621: Add 12-bit precision mode
1164  Module it87: Enable all alarms, add in8 support, add sensor type selection
1165  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1166                  remove support for module
1167  Module sis5595: Recognize unsupported chips and refuse to load
1168  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1169  Program eepromer: new
1170  Program Fix dependencies on i2c-proc; disallow compilation
1171                      of sensors.c as a module in kernel
1172  Program sensors: it87 updates; adjust temp. precision for some chips
1173  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1174                          recognize unsupported SiS chips;
1175                          recognize AMD 766 and Serverworks CSB5.
11772.6.0 (20010612)
1178  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1179        If your make fails because it can't find <linux/i2c-proc.h>, you
1180        forgot this step!!!
1181  File doc/FAQ: Many, many updates and additions
1182  File doc/busses/i2c-sis5595: new
1183  File doc/busses/i2c-tsunami: new
1184  File doc/chips/it87: new
1185  File doc/chips/via686a: Claim support for 686b.
1186  File README.thinkpad: new
1187  File Adjust as99127f in5 (-12V) and temp2 calculations;
1188                        Add lm87, adm9240, ds1780, lm81 templates;
1189                        Enhance help comments in file;
1190                        Add Tyan S2510 dual-MTP008 example;
1191                        Make separate sis5595 section.
1192  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1193  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1194  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1195           Add support for maxilife-nba and amd1024;
1196           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1197  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1198  Chip Modules (all): Change from sensors_* to i2c_* globals
1199                      for new i2c-proc.[ch]
1200  Makefiles: enhance to support Alpha architecture
1201  Module adm1021: Fix lm84 and gl523sm support
1202  Module adm1024: new
1203  Module i2c-i801: Chip detection cleanup
1204  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1205  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1206  Module i2c-tsunami: New
1207  Module i2c-via: Ensure i2c bus is tristated correctly.
1208  Module it87: new driver for IT8705, IT8712, Sis950 chips
1209  Module lm78: Recognize chipid=0x20
1210  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1211  Module mtp008: Fix temp initializations;
1212                 Save BIOS pin configuration of temps and fans;
1213                 Fix sensor type reads/writes and fan min writes;
1214                 Fix spurious invalid sensor type messages
1215  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1216                  used for patched kernel now.
1217                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1218  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1219                  Allow force_addr=0xaddr
1220  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1221  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1222                  reading changes; Add messages for subclient
1223                  registration failure
1224  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1225  Program i2cset: new
1226  Program isadump: fix for Alpha arch. compiles
1227  Program Fix adm9240 typos; Add more chips to;
1228                      Remove ltc1710; Fix i2c_sis5595 typo;
1229                      Support kernel 2.4.5 makefile change;
1230                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1231  Program sens_update_rrd: new
1232  Program sensord: Add -d (debug) and -p (pid-file) options
1233  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1234                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1235                   Change mtp008 temps from max/min to limit/hyst;
1236                   Add maxilife-nba, adm1024, it87 support.
1237  Program sensors-detect: Recognize lm78 with chipid=0x20;
1238                          Recognize SMSC Victory66 South Bridge;
1239                          Add devfs /dev/i2c/x support;
1240                          Add adm1024, it87xx support; Add thinkpad warning.
1241  Program tellerstats: new
12432.5.5 (20010115)
1244  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1245        you have kernel 2.4.0-prerelease or greater.
1246  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1247  File doc/developers/proc: new
1248  File Add mtp008 entries, adm1025 entries
1249  Library: Add ds1621, mtp008 support
1250  Module adm1021: Add support for adm1021a / adm1023
1251  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1252  Module adm1025: Add support for remote temp; rename /proc entries to
1253                  in[0-5] and temp[1-2]; fix negative temp readings
1254  Module adm9240: Rename /proc entries to in[0-5]
1255  Module ddcmon: allow force and force_ddcmon parameters
1256  Module ds1621: new
1257  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1258  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1259  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1260  Module lm87: cleanup, update voltage calculations
1261  Module mtp008: new
1262  Module pcf8574: change update time to 5 seconds
1263  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1264  Module w83781d: fix beep setting via /proc
1265  Programs editticket, readticket: new
1266  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
1267  Program more fixes; now adds many more modules
1268  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1269                   add adm1025 temp2; report temp limits correctly as
1270                   min/max or limit/hysteresis; print message if no
1271                   sensors are found. Removed false errors from lm87 reads.
1272  Program sensors-detect: Add ds1621, mtp008 detection;
1273                          add ServerWorks detection
12752.5.4 (20001012)
1276  Module i2c-viapro: Add support for Via 596B (0x3051)
1277  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1278  Program fixed infinite loop
1279  Program sensors-detect: Detect Via 596B (0x3051)
12812.5.3 (20001008)
1282  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1283  File useful_addresses.html: update
1284  Library: Add lm87 support
1285  Module pcf8574: new
1286  Module i2c-ali1535: new
1287  Module i2c-ali15x3: removed force #ifdef.
1288  Module i2c-i801: support Intel 82801BA (815E chipset)
1289  Module i2c-i801: add i2c block write support, fix smbus block bugs
1290                   (requires i2c 2.5.3 package)
1291  Module i2c-i810: support Intel 82815
1292  Module lm87: new
1293  Module sensors: Fix for kernel 2.4.0-test8
1294                  (remove copy_to_user_ret and put_user_ret)
1295  Module w83781d: limit fan divisors to 8 max. for as99127f
1296  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1297  Program i2cdump: Add smbus block read support
1298  Programs i2cdetect, i2cdump: Improve error reporting
1299  Program sensors: new switch -u (--unknown)
1300  Program sensors-detect: detect Intel 82801BA (815E chipset)
1301  Program sensors-detect: detect Intel 82815
1302  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1303  Program sensors-detect: detect National LM87
1304  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1305  Program sensors-detect: Improve error reporting
13072.5.2 (20000709)
1308  File Fix lm80 in8 calculation
1309  Module w83781d: W83783S no longer crashes on unloading
1310  Program sensors-detect: more robustness in case of unknown i2c adapters
1311  Program sensors-detect, libsensors: fix eeprom size reporting
1312  Program sensord: more flexibility, support for alarm scanning etc.
1313  Program sensors: support for ignore setting on sensor alarms.
1314  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
13162.5.1 (20000618)
1317  Library: Add adm1025 support
1318  Module adm1025: new
1319  Module ddcmon: Fixed bus scan which could hang SMBus
1320  Module i2c-keywest: new
1321  Module maxilife: Add support for Maxilife '99 (NBA)
1322  Module via686a: Enable sensors if not enabled by BIOS
1323  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1324  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1325  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1326  Module w83781d: Fis as99127f fan speed (was 66% too high)
1327  Module w83781d: Improve beep input checking
1328  Program i2cdump: Add Winbond-style bank selection
1329  Program isadump: Add Winbond-style bank selection
1330  Program sensors: Add adm1025 support.
1331  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1332  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1333  File Add Maxilife '99 entries
1334  File Remove some as99127f entries.
1335    Note: For as99127f, reinstall manually (make install
1336          won't reinstall it) or else 'sensors -s' will fail.
13382.5.0 (20000312)
1339  Dropped all kernel 2.0 and 2.1 compatibility
1340  Module i2c-i810: new
1341  Module ddcmon: new
1342  Module via686a: new
1343  Module i2c-amd756: fixed region request
1344  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1345  Module w83781d: Don't change pin settings at initialization;
1346                  also fix chip detection.
1347  Library: Support for ddcmon and via686a
1348  Program sensors-detect: Support for ddcmon and via686a
1349  Program sensors: Support for eeprom, ddcmon and via686a
13512.4.5 (20000116)
1352  Introduced DESTDIR installation prefix
1353  Module lm80: fixes, temperature now read and set correctly
1354  Module i2c-voodoo3: driver enhancements
1355  Module w83781d: fixes, AS99127 works much better now
1356  Library: New ignore keyword in config file
1357  Programs: Support for new ignore keyword
1358  Program sensors-detect: Support for MGA detections
13602.4.4 (19991201)
1361  Addition of the alpha release of AMD 756 SMBus host support.
1362  Many fixes and updates to the gl518sm driver
1363  Updates and fixes for device detection
13652.4.0 (19990920)
1366  Too much to list.
1367  i2c and smbus parts are split off to a separate i2c package.
1368  New drivers and other stuff.
13702.3.4 (19990616)
1371  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1372  All: Now compiles against kernel 2.0.x (again ;)
1373  Module gl518sm: some updates and refinements
13752.3.3 (19990603)
1376  All: Now compiles against kernel 2.3.x (x >= 1)
1377  Module i2c-voodoo3: Timing issue fixes
1378  Module bt869: Seems to be functional and relatively well tested
1379  Many modules were modified to be more compatible with the new
1380   Mutex structure in the new experimental kernels.
13822.3.2 (19990507)
1383  Module i2c-hydra: Now compiles on 2.0.x kernels
1384  Module i2c-lm75: Slightly better detection
1385  * New, but not compiled by default:
1386  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1387  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
13892.3.1 (19990501)
1390  All: Now compiles on PPC
1391  Module i2c-hydra: NEW
1392  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1393  Module w83781d: Removed deadlock (mutex was not initialized)
1394  Documentation: A few glitches removed
1395  Makefile: default module installation directory is now
1396            /lib/modules/current/extra/misc
1397  Program sensors-detect: PPC Hydra now detected
1398  Program sensors: Now prints complete GL518SM information
1399  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
14012.3.0 (19990422)
1402  All: Many, many changes and improvements
1403  All: Many small bugs and problems removed
1404  Modules: New insmod parameters
1405  Modules: Much improved chip detection
1406  Module maxilife: NEW
1407  Module adm1021: MAX1617A now also supported
1408  Module adm9240: DS1780 now also supported
1409  Module w83781d: W83782D and W83783S now also supported
1410  Program sensors-detect: NEW
1411  Library: All chips now supported
1412  Documentation: Very much improved
14142.2.2 (199903??)
1415  Just some minor updates and bug fixes.
14172.2.1 (19990218)
1418  All: Removed compile warnings
1419  Module i2c-dev: Small bug removed if DEBUG=1 was used
1420  Module sis5595: Now compiles for 2.0 kernels
1421  Module adm1021: Detection corrected
14232.2.0 (19990216)
1424  All: Set copyrights to include 1999
1425  All: Small bugfixes
1426  I2C: Upgraded to newest archive of Simon Vogl
1427  Module i2c-dev: NEW
1428  Module i2c-ali15x3: NEW
1429  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1430     directories, and somewhat improved
1431  Module sis5595: NEW
1432  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1433  Library: Support for new chip drivers, several small bugs fixed
1434  Library manual pages: NEW
1435  Program i2cdetect: Moved to detect directory
1436  Program NEW
1437  Program doc-features: NEW
1438  Program sensors: Added man-page
1439  Document BUGS: Added cdrom bug and kernel i2c conflict
14412.1.2 (19990116)
1442  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1443  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1444  Documentation in doc/kernel: NEW
14462.1.1 (19990107)
1447  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1448                     and older
1449  Module gl518sm.o: Miscelaneous bugs and problems solved
1450  Program isadump: NEW
14522.1.0 (19981230)
1453  Library: Completely NEW
1454  Program sensors: NEW
1455  Program grab_busses: NEW
1456  Program decode-dimms: More information
1457  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1458  Module w83781d.o: NEW
1459  Module lm80.o: NEW
1460  Module gl518sm.o: new procfile beep, several small updates
1461  Modules: Now use pin readings, no more scaling within the kernel (use the
1462           library instead)
14642.0.2 (19981214)
1465  Module eeprom.o: NEW
1466  Program decode-dimms: NEW
1467  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1468           2.1.58
1469  Modules: Somewhat less verbose on transfers
1470  Module lm78.o now recognizes and handles lm78-j and lm79
14722.0.1 (1998121?)
1473  Module gl518sm.o updates, to make it actually work
1474  Module lm75.o high/low-byte swapping write bug fixed
14762.0.0 (19981209)
1477  Initial release
Note: See TracBrowser for help on using the browser.