root/lm-sensors/trunk/CHANGES @ 4231

Revision 4231, 74.3 KB (checked in by khali, 8 years ago)

prog/eepromer/eepromer: Enable warnings, and fix most of them.
The code of this program was really ugly (and still is), its author
should be ashamed.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
4SVN HEAD
5  RPM: Obsolete, removed
6  Library: Add support for the pc87247 driver (fans only)
7           Probe for busses before chips
8           Drop support for algorithm names
9           Add support for coretemp driver   
10           Major update/optimization of config-file scanner
11           Add config-file scanner regression tests
12  Man page i2cdetect.8: Describe the output convention
13  Man page sensors.1: Update (option -c) and clean up
14  Module icspll: Delete. It was useless and dangerous.
15  Program eepromer: Fix loads of warnings
16  Program i2cdetect: Make the output clearer
17  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
18  Program sensord: Add pc87247 support (fans only)
19  Program sensors: Add pc87247 support (fans only)
20                   Hide error on missing f71805f fan
21                   Handle option -c more efficiently
22                   Drop option -a (show algorithm names)
23  Program sensors-detect: Add SMSC DME1737 detection
24                          Add EPoX EP1308 detection (Hans Edgington)
25                          Add Intel Core thermal sensor detection
26                          Preallocate memory for I2C_FUNCS ioctl (#2138)
27
282.10.1 (20060924)
29  File doc/developers/checklist renamed to dev/developers/release_checklist
30          with clarifications and updates for new SVN server.
31  File README.package: Delete.
32  File doc/busses/i2c-piix4: Update (2.6 backport)
33  File doc/developers/sysfs-interface: Update
34  File etc/sensors.conf.eg: Add an smsc47m192 section
35                            Comment out all set statements
36                            Add an it8716 section
37                            Add a w83793 section
38                            Adjust the vt1211 section to match the new driver
39                             interface
40  Library: Fix device scan when no i2c support is present
41           Add support for W83627EHF voltage inputs and alarms
42           Add support for the smsc47m192 driver
43           Fix all memory leaks (yeah!)
44           Fix no sensors being reported as an error
45           Add support for the IT8716F and IT8718F chips
46           Add support for the W83793 chip (Yuan Mu)
47           Map the 2.6 adm1026's fan8 to fan0
48           Missing sysfs busses and classes are not errors
49           Change vt1211 temp3-7 magnitude from 1 to 3
50  Makefile: Don't grep autoconf.h on user-space targets
51            Fix depmod on non-running kernel version
52            Remove empty include directories on make user_uninstall
53  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
54  Module i2c-amd756-s4882: Improve static semaphore initialization
55                           (2.6 backport)
56  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
57                   Add ICH8 support (2.6 backport)
58                   Fix block transaction poll loops (2.6 backport)
59                   Remove PCI function check (2.6 backport)
60                   Cleanups (2.6 backport)
61  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
62  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
63                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
64                    Drop the fix_hstcfg parameter (2.6 backport)
65  Module i2c-viapro: Fix compilation with kernels < 2.4.21
66                     Add VT8237A and VT8251
67  Module lm83: Add LM82 support (2.6 backport)
68  Module vt1211: The VT1211 has no in6
69                 Rework the voltage and temperature conversions and the
70                  temperature input order to match the Linux 2.6 driver
71  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
72                  Add specific alarm and beep defines for the W83791D
73  Module w83792d: Fix PWM range (2.6 backport)
74  Program decode-dimms.pl: Decode depending on the memory type
75                           Decode the manufacturing date to an ISO8601 date
76                           Add the memory size computation and provide brief
77                            timing characteritics for SDRAM/DDR/DDR2 memory
78                           Add memory size computation for Rambus memory
79                           Various output cleanups and fixes
80  Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
81  Program decode-vaio.pl: Detect and skip false positives
82  Program i2cdetect: Add a mode to print adapter functionalities
83  Program i2cdump: Restore bank after bank switching
84                   Add new mode W (read word on even register addresses)
85  Program mkpatch: Fix typo breaking f71805f
86                   Turn warnings on (-w), and fix them
87                   Print a usage message on missing command line parameters
88  Program pwmconfig: Use mktemp instead of tempfile
89  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
90                   Add smsc47m192 support
91                   Add abituguru support (Hans de Goede)
92                   Fix memory leak when printing an unknown chip
93                   Add it8716 and it8718 support
94                   Make each it87 fan and fan div optional
95                   Print missing w83791d values
96                   Add w83793 support (Yuan Mu)
97                   The adt7463 may not have in4 (#2119)
98                   Hide more vt1211 missing input errors
99                   Clearer error messages when no sensors found
100  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
101                          Add ATI IXP200/300/400 SMBus detection
102                          Prevent warning on 64-bit PCI addresses
103                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
104                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
105                           F75384S/M, F75387SG/RG and F81218D detection
106                          Add Winbond W83793R/G and W83627DHG detection
107                          Handle the W83791D driver difference between kernels
108                          Add nForce4 MCP04, MCP51 and MCP55 detection
109                          Add AMD Geode devices detection
110                          Add ITE IT8716F and IT8718F detection
111                          Add NatSemi/Winbond PC87427 detection
112                          Get driver information for busy addresses from
113                           sysfs (2.6 only)
114                          Drop the ISA IT87xxF detection
115                          Check i2c adapter functionalities before probing
116                          Add Intel ICH8 SMBus detection
117                          Add AMD K8 thermal sensors detection
118                          Simplify detection of SiS5595, VIA686 and VT8231
119                          Add Analog Devices ADM1033, ADM1034, ADT7462,
120                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
121                          Check for root user at startup
122                          Attempt to be slightly more user-friendly
123                          Add VT8237A and VT8251
124                          Remove detection of nVidia graphics adapters
125                          Use sysfs for PCI device enumeration
126                          Add generic PCI SMBus adapter detection
127                          Add generic Super-I/O logical device detection
128                          Add SMSC LPC47M172/182 detection
129
130
1312.10.0 (20060214)
132  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
133  File doc/busses/i2c-viapro: Update (2.6 backport)
134  File doc/chips/via686a: Update (2.6 backport)
135  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
136  File etc/sensors.conf.eg: Do not set vrm by default
137  File i2c-dev.h: Fix union i2c_smbus_data definition
138                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
139                  Add missing parentheses around macros
140                  Drop I2C_FUNC_SMBUS_EMUL
141                  Drop I2C_FUNC_SMBUS_*_PEC
142                  Drop I2C_SMBUS_*_PEC
143  File sensors_vid.h: Drop default VRM
144  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
145           This is intentional.  Use decode-dimms.pl if you still
146           need your memory SPD data.
147  Library: Big update to use libsysfs.  More TODO though.
148           Fix bus matching code for Linux 2.6 (Karsten Petersen)
149           Add f71805f, w83687thf support
150           Add platform drivers support
151           Fix sysctl warnings on x86_64
152           Restore vt1211 temp1
153  Makefile: Compile user-space programs with -Wundef
154  Module i2c-i801: Simplify the hardware PEC code
155                   Always set PEC mode explicitly before each transaction
156  Module i2c-i810: Documentation update, PCI IDs cleanup
157  Module i2c-keywest: Remove bus probing code (2.6 backport)
158  Module i2c-nforce2: Remove dead code (2.6 backport)
159                      Add the ID of the nForce4 MCP-04 (2.6 backport)
160  Module i2c-via: Remove dead code
161  Module i2c-viapro: Remove dead code
162                     Support I2C block read (2.6 backport)
163                     Code cleanups (2.6 backport)
164                     Improve debug register dump (2.6 backport)
165  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
166          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
167          i2c-sis645: Use pci_driver name to request I/O region; do
168                      not initialize i2c_adapter name to "unset" (2.6
169                      backport)
170  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
171                                              (2.6 backport)
172  Module adm9240: Cleanups (2.6 backport)
173  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
174  Module it87: Minor cleanups
175               Fix fan3_div setting bug (Anton V. Staaf)
176  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
177               Separate the register read function
178               Add PEC support for the ADM1032
179  Module via686a: Cleanups
180  Module w83627hf: Drop useless initialization step (2.6 backport)
181                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
182                   Fix alarms (Yuan Mu)
183                   Preserve fan min on fan div change (Yuan Mu)
184                   Properly handle W83627THF without VID (Yuan Mu)
185                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
186                   Add W83687THF support
187  Module w83781d: Drop W83697HF support (Grant Coady)
188  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
189                  Fix fan control mode (PWM/DC) reporting
190                  Fix fan div auto-adjust (Yuan Mu)
191                  Fix the subclient handling
192  Module w83l785ts: Minor cleanup (2.6 backport)
193  Module vt1211: Restore temp1
194  Modules vt1211, vt8231: Change default VRM to 9.1
195  Program decode-dimms.pl: Add lookup tables for manufacturer names
196                           Fix rounding error in PCxxxx speed computation
197                           Improve text output
198                           Improve speed under Linux 2.6
199                           Verify checksum before decoding anything
200                           Improve manufacturing location decoding
201                           Improve memory type detection
202                           Improve part number decoding
203  Program i2cdump: Drop now useless #ifdef tests
204                   Fix capability check for continuous byte mode
205  Program i2cget: New
206  Program i2cset: Add PEC support
207                  Fix argc check
208  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
209                                       Print the correct bus type if bus
210                                       functionality can be queried
211  Program isadump: Display the real addresses in flat mode
212  Program mkdev.sh: Silently skip already existing nodes
213  Program mkpatch: Include f71805f
214  Program sensord: Do not log algorithm names
215                   Drop EEPROM support (Aurelien Jarno)
216                   Add W83627EHF, F71805F/FG support
217                   Fix PC87365/PC87366 alarms
218  Program sensors: Drop free_the_label
219                   Fix compilation with uclibc (no iconv)
220                   Add f71805f, w83687thf support
221  Program sensors-detect: Drop algorithm names
222                          Do not rely on i2cdetect -l printing algo names
223                          Simplify adapter name matching mechanism
224                          New address for ADM1032, ADT7461
225                          Improve ADT7467, ADT7468 support
226                          Fix MAX6659 reported driver
227                          Add Fintek F71805F detection
228                          Add Analog Devices ADT7476 detection
229                          Add Intel 82845G detection
230                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
231                          Fix udev detection in some corner case
232                          Improve DS1621 detection
233                          Always prefer ISA access over SMBus access
234
235
2362.9.2 (20050906)
237  File doc/chips/*: Big update (2.6 backport)
238  Library: Drop ds1780-specific code (now use adm9240)
239           Fix memory leak in sensors_get_label()
240           Support /sys/class/hwmon (Linux 2.6.14+)
241           Limit stack usage in sensors_read_proc_chips()
242  Makefile: Detect 2.6+ kernels and check targets
243  Man page isaset.8: Fix typos
244  Module adm1031: Fix broken kfree() calls
245  Module i2c-ali1563: New (2.6 backport by Winbond)
246  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
247  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
248          w83627hf.c: Tag find function __init
249  Module lm93: Fix memory leak
250  Module smsc47m1: Fix PWM enable polarity on read
251  Modules w83627hf, w83781d: Allow setting fan divisor to 128
252  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
253                           Added DDR/DDR2 frequency reporting in convenient
254                           form of DDRxxx PCyyyy
255  Program i2cdump: Properly handle short i2c block reads
256  Program fancontrol.pl: Fix compile errors
257  Program mkpatch: Include i2c-ali1563
258                   Include w83792d
259  Program pwmconfig: Fix unsafe temporary file use
260  Program rrd: Support 2.6 kernels
261  Program sensord: Add support for w83637hf
262                   Support pc87360 (Henrik Brix Andersen)
263  Program sensors: Support the VAIO "VGN" prefix for eeprom
264  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
265                          Advertise the w83792d driver
266                          Improve IT8705F and IT8712F detection
267                          Merge LM82 and LM83 detection
268                          Add W83687THF detection
269
270
2712.9.1 (20050412)
272  File doc/busses/i2c-nforce2: Update
273  File doc/chips/it87: Update
274  File doc/chips/lm90: Update for adt7461
275  File doc/chips/mic74: New
276  File etc/sensors.conf.eg: New sections for lm92 and w83792d
277  Library: Add support for 2.6 fscpos driver (Stefan Ott)
278           Fix sis5595 in4 (Aurelien Jarno)
279           Add support for 2.6 gl520sm driver (Maarten Deprez)
280           Add support for 2.6 bmcsensors driver (Yani Ioannou)
281           Add support for w83792d (Chunhao Huang/Winbond)
282           Add support for 2.6 adt7461 (James Chapman)
283           Add support for 2.6 lm92
284           Add support for 2.6 vt1211
285           Add preliminary support for 2.6 w83627ehf
286  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
287            Use -fno-strict-aliasing on all architectures
288  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
289  Module bmcsensors: Fix compile error
290                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
291  Module ds1621: Fix detection (Aurelien Jarno)
292  Module eeprom: Discard SPD-centric checksum module parameter
293                 Cleanup detection function (backport from Linux 2.6)
294  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
295  Module i2c-i801: Temporarily disable broken I2C block read
296  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
297                   Gelato)
298  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
299  Module i2c-viapro: Prevent repeated resets
300  Module it87: Improve Super-I/O detection
301               Limit I2C address range
302               Support VID on the IT8712F
303  Module lm75: Only initialize CMP/INT bit
304  Module lm78: Fix bug with setting negative temperature limits
305  Module lm85: Properly differentiate between ADM1027 and ADT7463
306               Add EMC6D102 support
307  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
308               Add limited ADT7461 support
309  Module lm93: Fix IN10 (+5V) scaling
310  Module mic74: New
311  Module w83627hf: Support secondary Super-I/O address
312                   Enable temp2 and temp3 if they are disabled
313  Module w83781d: Revert AS99127F temp2 and temp3 computation change
314                  Skip final initialization step for AS99127F chips
315  Module w83792d: New (Chunhao Huang/Winbond)
316  Program ddcmon: New; user-space replacement for the ddcmon driver
317  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
318  Program isadump: Handle Super-I/O keys
319  Program lm_sensors.init: Cleanups (Axel Thimm)
320  Program mkdev.sh: Add basic command-line interface
321  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
322  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
323                     Don't complain about read-only enable files (lm85)
324                     Fix handling of alternate config file name
325  Program sensord: Fix erroneous error message (Aurelien Jarno)
326                   Support sis5595 in4 (Aurelien Jarno)
327                   Support w83627thf
328                   Support the separate it8712 prefix (Aurelien Jarno)
329  Program sensors: Display sis5595 in4 (Aurelien Jarno)
330                   No errors on missing pc87360 fans
331                   Add gl520sm support (Maarten Deprez)
332                   Improve vt1211 error/ignore handling (Michael Carland)
333                   Support w83792d, w83627ehf
334  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
335                          Improve IT8705F and IT8712F detection
336                          Improve udev detection
337                          Fix DS1621 detection
338                          Add W83627EHF detection
339                          Add ATI SMBus detection
340                          Add VT1211 alias detection
341                          Warn if chip modules not found
342                          Add i2c-ipmi to list if bmcsensors is on it
343                          Add PC87591 detection
344                          Search for correct udev db file name
345                          Add nForce3 250Gb and nForce4 detection
346
347
3482.9.0 (20041228)
349  NOTE: Requires i2c-2.9.0 or newer!
350  File README.thinkpad: Update
351  File doc/chips/it87: Cleanups
352  File doc/chips/lm63: New
353  File etc/sensors.conf.eg: Set via686a voltage limits
354  File kernel/chips/Module.mk: Resync module list with mkpatch
355  File kernel/include/sensors_compat.h: Define __devexit_p if missing
356                                        (kernels 2.4.16 and older)
357  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
358                             and dec_use removed in release 2.8.0
359  Modules (all chip drivers): Remove owner from i2c_driver; pass
360                              controlling_mod to i2c_register_entry() again
361  Module bmcsensors: Support function 1/x
362  Module i2c-amd756: Display the real bus name
363  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
364  Module i2c-i801: Support i2c block read (ICH5 and higher)
365                   Add PEC support for ICH6
366                   Add support for ICH7
367  Module i2c-ipmb: Remove from build since it doesn't work
368  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
369  Module icspll: Fix compilation
370  Module lm63: New driver for the National Semiconductor LM63
371  Module lm83: Use signed types for temperatures
372               Check limits on register writes
373  Module lm87: Round voltages properly
374               Retry on read errors (David Knierim)
375               Less agressive init (no reset)
376  Module lm90: Use signed types for temperatures
377               Check limits on register writes
378  Module lm93: Added module parameter for VID pin input thresholds.
379               Fix typo in dynamic VID alarms
380               Adds a couple log messages for failed transactions (David
381               Knierim)
382               Fix compilation breaking C99-ism (Axel Thimm)
383               Fix block read retries
384  Module pc87360: Support secondary Super-I/O address
385  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
386  Library: Add lm63 support
387           Add lpc47b397 support
388  Programs *.init: Rename lockfile to match file name
389  Programs i2cset, isaset: Written byte/word can be masked
390  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
391  Program mkpatch: Include i2c-amd756-s4882
392  Program pwmconfig: Handle new (well, back to old) pwm files names for
393                     Linux 2.6.10 and up
394  Program sensord: Do not scale load average (Aurelien Jarno)
395  Program sensors: Add lm63, lpc47b397 support
396                   Support DDR2 memory module EEPROMs (Rudolf Marek)
397                   Support only one location for the default configuration file
398                   Display the default configuration file location in --help
399                   Simplify the configuration file opening code
400  Program sensors-detect: Improve LM63 detection
401                          Discard IBM Thinkpad detection code
402                          Add PCA9556, LPC47B397, ICH7 detection
403                          Fix W83792D detection, add W83791SD detection
404
405
4062.8.8 (20041007)
407  File doc/donations: Update
408  File doc/lm_sensors-FAQ.texi: Add 4.6.1
409                                Update 4.7
410  File doc/chips/gl518sm: Update "iterate" info
411  File doc/chips/it87: Discard outdated module parameters
412  File doc/chips/lm75: LM77 is not supported
413  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
414  File doc/chips/lm93: New
415  File doc/chips/w83l785ts: Improvements
416  File etc/sensors.conf.eg: Fix it87 lines order
417                            Update lm87 section
418  File kernel/include/sensors_vid.h: Support VRM 10.0
419  Library: Support 2.6 adm1025
420           Preliminary support for 2.6 lm87
421           Support 2.6 adm9240
422           Allow an alternative sysfs file name for chip features (2.6)
423           Fix lm83 critical limits (2.6)
424           Add lm93 support
425           Prevent some procfs errors from being silently ignored
426  Makefiles: Implement user_uninstall (Rudolf Marek)
427             Spoof LOGNAME and HOSTNAME when making html man pages
428  Module adm1025: Refine detection
429                  Update limit registers again (revert of 2.8.1)
430                  Init high limits if they read 0
431                  Fix conversions
432  Module lm75: Refine detection
433  Module lm78: Fix init
434  Module lm83: Default to kind lm83 if forced.
435               Fix temperature macros.
436  Module lm90: Add LM86, MAX6657 and MAX6658 support
437  Module lm93: New
438  Module mtp008: Fix the setting of limits on temp2
439  Module pca9540: Refine detection
440  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
441                  Support VID
442                  Fix fan_div file when fan count is less than 3
443                  Additional init and debug
444  Module smsc47m1: Fix pwm_enable being inverted
445  Module w83627hf: Add alternate VCORE/in0 calculation method
446                   Remove reset of chip by driver on initialization
447  Module w83781d: Fix default VRM for w83791d
448  Module w83l785ts: Implement read error handling (backport from 2.6)
449  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
450                    Wait for user input to continue (as opposed to 5 sec
451                    delay), can be skipped with -y
452                    Various cleanups and code refactoring
453                    Update manual pages
454  Program fancontrol.init: New (Dean Takemori)
455  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
456  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
457                           (Giuseppe Della Bianca)
458  Program mkdev.sh: Detect devfs and refuse to run
459                    Use mknod's mode instead of chmod
460  Program mkpatch: Include xeontemp and pc87360
461  Program sensors: Rework adm1025 support
462                   Display pc87365/pc87366 VID
463                   Improve smsc47m1 support
464                   Hide 2.6 adm1027 alarm_mask being missing
465                   Print VRM version for all supported chips
466  Program sensors-detect: Support LM93, LM77, LM63
467                          Support PC8739x Super-I/O family (no sensors)
468                          Fix PCA9540 support
469                          Refine ADM1025/ADM1025A detection
470                          Refine LM75 detection
471                          Ignore missing /proc/modules (Andras Bali)
472                          Script-wide Perl cleanups
473                          Support udev
474                          Support W83792D, LM96000
475
476
4772.8.7 (20040611)
478  File README.thinkpad: Update 24RF08 status
479  File doc/fan-divisors: More info on accuracy
480  File doc/lm_sensors-FAQ.texi: Update 4.27
481  File doc/chips/adm1031: New
482  File doc/chips/max1619: New
483  File doc/chips/pc87360-fan: Renamed to pc87360
484  File doc/chips/pc87360: Big update
485  File doc/chips/w83781d: Update AS99127F documentation
486  File etc/sensors.conf.eg: Add comments about BP6 voltages
487                            Add comment on Asus A7V8X-X VCore
488                            Misc fixes to lm80 section
489                            Update via686a section
490                            New lm99 section
491                            Add section for LM85-like chips
492                            Preliminary pc87366 section
493                            Add comment on GL520SM application modes
494                            Document beep_enable (Aurelien Jarno)
495                            Preliminary max1619 section
496                            Preliminary adm1030 and adm1031 sections
497  Library: Fix 2.6 VRM
498           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
499           Fully support the PC87360 family
500           Support the lm99
501           Add version and date strings
502           Support 2.6 max1619
503  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
504  Man page i2cdetect.8: document new command line flags
505  Man page i2cdump.8: More details on how i2cdump can write to a chip
506  Modules (all chip drivers): Rework memory allocation scheme.
507  Module adm1031: New (Alexandre d'Alton)
508  Module bmcsensors: Fix oops by creating thread for initialization
509  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
510  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
511          asb100.c, lm92.c: Use swab16
512  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
513  Module gl520sm: Less agressive initialization process
514                  Fix temp1 limits being unsettable in application
515                  Ensure that temp2 and in4 are not used at the same time
516  Module i2c-i801: Support 6300ESB and ICH6
517  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
518  Module i2c-sis645: Add support for SiS655
519  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
520  Module lm90: Support LM99 and LM89
521  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
522               Get rid of useless i2c_probe call
523  Module max1619: New (Alexey Fisher)
524  Module p4b_smbus: Add support for mobile versions of the 82801
525                    (Axel Thimm)
526  Module pc87360-fan: Renamed to pc87360
527  Module pc87360: Also support PC87365 and PC87366
528                  Add write support
529                  Correctly set the chip name depending on the type
530                  Add voltage and temperature support
531                  Fix fan speed computation
532                  Retrieve fans configuration from Super-I/O space
533                  Export pwm_enable (read-only)
534                  Honor pwm invert bits
535                  Clear fan alarms after we read them
536                  Do not read fan data when monitoring is disabled
537                  Do not include SENSORS_INSMOD stuff
538                  New module parameter: init
539                  Fan clock dividers change automatically
540                  Add thermistor dupport
541  Module smsc47m1: Lock on reads and writes
542                   Various PWM fixes
543  Module thmc50: Fix address range
544  Module via686a: Fix voltage roundings
545                  Simplify temperature conversions
546  Module w83781d: Drop PWM support for as99127f
547                  Invert AS99127F beep bits in driver rather than user-space
548  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
549  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
550  Program fancontrol.pl: New
551  Program i2cdetect: Adapt probing method to address
552                     Add -q and -r flags to force probing methods
553                     Allow probing range selection
554  Program isadump: Major improvements
555  Program isaset: New
556  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
557                   module
558                   Include i2c-nforce2
559  Program sensord: New --rrd-no-average parameter
560                   Syncronize time slots with rrd
561                   Fix W83781D temp3 alarm (Aurelien Jarno)
562                   Add ASB100 support (Andrew May)
563  Program sensors: Fully support the PC87360 family
564                   Fix lm80 temperature alarms
565                   Support the lm99
566                   Do not invert AS99127F beep bits anymore
567                   Fix W83781D temp3 alarm (Aurelien Jarno)
568                   Print library version string
569  Program sensors-detect: Rework Super I/O detection
570                          Support SiS655/SiS96x
571                          Support ADT7461 and ADT7467
572                          Better support for ADM1027, ADT7460 and ADT7463
573                          Explicitly support ADM1028
574                          Scan all logical devices of PC87365 and PC87366
575                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
576                          Detect eeproms with software write protect (not
577                          enabled by default)
578                          Support ALi 1563 (2.6 only)
579                          Drop LTC1710 support
580                          Use byte reads for probing on ranges 0x30-0x37 and
581                          0x50-0x5F
582                          Improve LM89 and LM99 support
583                          Support GeForce FX 5900 video cards
584                          Fix devfs misdetection (Aurelien Jarno)
585                          Detect 6300ESB, ICH6
586                          Fix double detection of ISA chips
587                          Support MAX1619
588                          Support PC87373 Super-I/O
589                          Fix unknown adapters appearing multiple times
590                          Refine MAX6650/MAX6651 detection
591
592
5932.8.6 (20040405)
594  File README.thinkpad: Update status
595  File doc/chips/pca9540: New
596  File doc/chips/pc87360-fan: New
597  File etc/sensors.conf.eg: Update pcf8591 default configuration
598  Library: Switch to new sysfs naming standard
599           Fix gcc 3.3 warnings (Philipp Thomas)
600           Support 2.6 ds1621 and pcf8591
601           Change pcf8591 magnitudes
602           Support pc87360-fan
603  Makefile: Install shared library 755
604  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
605  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
606  Modules ds1621, pcf8591: Check for capabilities before using them
607                           (Aurelien Jarno)
608  Modules pcf8574, pcf8591: Cleanups
609  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
610  Module adm1021: Better detection and initialization
611  Module pca9540: New driver for the Philips PCA9540
612  Module pc87360-fan: New driver for the National Semiconductor PC87360,
613                      PC87363 and PC87364 Super I/O chips
614  Module smsc47m1: Support the LPC47B27x
615  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
616  Program i2cdetect: Skip special addresses by default
617  Program sensord: Prevent null pointer dereference (Tim Toohey)
618  Program sensors: Print the degree symbol in the terminal's current locale
619                   (Aurelien Jarno)
620                   Update pcf8591 print to support 2.6 driver
621                   Support pc87360-fan
622  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
623                          Improved SiS chips support
624                          Add a white list of IBM systems
625                          Drop support of undetectable adapters
626                          Fix smart battery detection
627                          Add smart battery charger and manager detection
628                          Rework adm1021 and clones detection
629                          The PC87360, PC87363 and PC87364 Super I/O chips
630                          now have a (preliminary) driver
631                          Rework Super I/O detection
632                          Better support of devfs
633  Program sensors-detect-stat.pl: New
634
635
6362.8.5 (20040305)
637  File doc/chips/SUMMARY: Update
638  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
639  Makefiles hotplug and rrd: Remove -o and -g arguments to install
640  Module bmcsensors: Increase max SDRs to 100
641  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
642  Module i2c-amd756: Don't register driver to avoid driver conflicts.
643                     (Daniel Rune Jensen)
644  Module it87: Better temperature sensor types handling (Takeru Komoriya)
645               Fix reset=1 (Takeru Komoriya)
646  Module lm80: Code cleanups
647  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
648  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
649  Module w83627hf: Add w83637hf support
650                   Fix exported name
651                   Fix PWM in w83627thf
652                   Preserve other bits when forcing temp2/3 to comparator mode
653  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
654                  Remove asb100 support
655  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
656          Define driver ID if i2c-id.h doesn't have it yet.
657  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
658          Backport oops fix from Linux 2.6.
659  Modules (all chips): Get rid of useless headers
660  Program decode-edid.pl: Add sysfs support
661  Program sensors: Add w83637hf support
662                   Add support for Shuttle Ethernet EEPROMs
663                   Drop 2.6 subclient detection
664  Program sensors-detect: Add heuristics to the LM80 detection function
665                          Add support for W83L785R, improve W83L784R/AR
666                          Add GeForce FX 5600 as supported by rivatv
667                          More Super IO chips, better handling
668  Library: Update to match renames in fscher
669           Reverse temporary changes to w83l785ts mappings
670           Fix vt1211 and vt8231 uch_config not being writable
671           Add 2.6 lm80 support
672           Add w83637hf support
673           Remove in6 and temp1 from vt1211 and vt8231
674           Add support for Shuttle Ethernet EEPROMs
675           Remove unused as99127f features
676
677
6782.8.4 (20040207)
679  File doc/lm_sensors-FAQ.texi: Update 4.20.
680  File doc/chips/it87: Change hyst to low
681  File doc/chips/w83l785ts: New
682  File etc/sensors.conf.eg: Change it87 hyst to low
683                            Fix w83697hf supposed to have temp3
684                            Limits initialization for adm1025/ne1619
685                            Handle fscher voltage conversions
686                            Add Tyan Trinity S2495 KT400 setup (Eric
687                              Schumann)
688                            Fix fscher fan labels (Reinhard Nissl)
689  Library: Better 2.6 eeprom support
690           Change it87 hyst to low
691           Add 2.6 gl518sm, fscher support
692           Fix 2.6 negative voltages handling
693           Temporary fix to w83l785ts mappings
694  Module adm1025: Separate prefix for NE1619
695  Module adm1026: Remove use of temporary ID
696                  Define addresses as a range
697  Module bmcsensors: Fix reservations
698  Module fscher: Externalize voltage conversions
699  Module eeprom: Remove memtype
700  Module i2c-piix4: Fix resource release error
701                    Various cleanups
702  Program decode-vaio.pl: Add sysfs support
703  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
704                   Drop linux 2.2 support
705                   Add w83627hf
706  Program sensors: Do not show algorithm by default
707                   Cleanup temperature unit display code
708                   Cleanup label spacing code
709                   Fix output to UTF-8 terms (Marcel Sebek)
710                   Simplify gl518sm print
711                   Do not ignore errors in FSC chips prints
712                   Fix w83l785ts print
713                   Cleanup FSC chips prints
714  Program sensors-detect: Fix PATH issues
715                          Correctly point to the fscher driver
716
717
7182.8.3 (20040115)
719  File lm_sensors.spec: Update
720  Library: Add 2.6 eeprom, lm90 support
721           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
722  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
723  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
724  Module i2c-amd756: Fix byte writes
725  Module i2c-tsunami: Cleanups (Daniel Nilsson)
726  Module it87: Fix sg_tlx writes; fix sensor type reporting;
727               add 8712 Super I/O detection;
728               remove initialization of temp_type and fan_ctl;
729               remove init and temp_type module parameters
730  Module lm90: Handle hysteresis differently
731  Module smartbatt: Fix detection, magnitudes, temp
732  Module w83781d: Fix negative voltages
733  Module w83l785ts: New
734  Program eeprog: Make 8 bit mode the default
735  Program fancontrol: Improvements, fixes, support 2.6 kernels
736  Program mkpatch: Add lm75.h
737  Program pwmconfig: Improvements, fixes, support 2.6 kernels
738  Program sensors: Add ASB100 support
739  Program sensors-detect: Add 8712 Super I/O detection;
740                          add W83L785TS detection
741
742
7432.8.2 (20031211)
744  IMPORTANT: Limit initialization removed from all chip drivers!
745             If you didn't run 'sensors -s' in the past you may need to now!
746  File sensors.conf.eg: Change lm75 scaling back to 1;
747                        Add example for asb100
748  Library: Fix bmcsensors scaling, increase number of sensors;
749           Add w83627thf support; Advance version to 3.0.0;
750           Add hermes, ADM1032, ASB100 support;
751           Add it87 sensor type support;
752           Add sysfs support for kernel 2.6;
753           Fix memory leaks
754  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
755             Fail if no kernel .config file exists;
756             Don't build module dependencies for user and user_install
757  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
758          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
759          smsc47m1, thmc50, via686a, w83627hf, w83781d:
760          Remove initialization of limits by driver.
761  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
762  Modules (chip): Init cleanups
763  Module asb100: New
764  Module bmcsensors: Fix voltage scaling, voltage and fan limits
765  Modules ddcmon, eeprom: Add failure printks
766  Module fscher: New (Fujitsu-Siemens Hermes driver)
767  Module i2c-amd756: Fix AMD8111 support
768  Module i2c-amd8111: Fix byte writes
769  Module i2c-nforce2: Fix byte writes
770  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
771  Module i2c-sis630: Sync with 2.6.0-X driver version
772  Module i2c-viapro: Add support for Via 8237
773  Module it87: Add pwm and "smart guardian" support;
774               add it87 sensor type support
775  Module lm75: Fix negative voltages
776  Module lm90: Add ADM1032 support
777  Module w83781d: Fix 791d and 627hf detection
778  Module w83627hf: Add VID support
779  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
780  Program eeprog: New
781  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
782                                       support sysfs for i2c bus search
783  Program i2cdetect: Add -l option to list busses
784  Program i2cdump: Add 'c' mode for consective address reads
785  Program mkpatch: Cleanups
786  Program pwmconfig: Handle multiple fans controlled by a single pwm
787  Program sensord: Remove ddcmon support
788  Program sensors: Add ADM1032 support; add messages for sysfs
789  Program sensors-detect: Prefer Super I/O drivers;
790                          Fix W83627HF and W83791D detection; detect CSB6;
791                          Detect ADM1029, ADM1030, ADM1031;
792                          Detect W83637HF, W83697UF;
793                          Add it87 sensor type support; add sysfs support
794                          Reduce lm80 misdetects; remove PCFxxxx "detection"
795                          Detect VT8237 (KT600)
796                          Use VPD instead of DMI+ACPI for Thinkpad detection
797                          Suggest new asb100 driver instead of w83781d
798
799
8002.8.1 (20031005)
801  NOTE: Requires i2c-2.8.1 or newer!
802  File sensors.conf.eg: Improved adm1025 section
803                        Default temp labels for as99127f
804                        Improved lm83 section
805                        Better support for Asus A7V8X-X
806  File doc/chips/SUMMARY: Add SMSC manufacturer ID
807  File doc/chips/adm1025: Add decent documentation (almost new)
808  File doc/chips/lm83: Known motherboards list update, misc updates
809  Library: Change adm1025 names (hyst/over become low/high)
810           Swap adm1025 temp1 and temp2 to match the driver's order
811           Advance version to 2.0.1
812           Update lm83 support
813           Add support for lm90, xeontemp, max6650
814           Add separate messages for read and write errors
815           Add missing message for parse error
816  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
817  Modules (various): Fix includes for compilation on Alpha
818                     Use the new i2c_delay function instead of the various
819                     do_pause functions
820  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
821  Module i2c-nforce2: Cleanups
822  Module i2c-i810: Use readl/writel for portable access to PCI memory
823  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
824  Module i2c-savage4: Use readl/writel for portable access to PCI memory
825  Module i2c-sis630: Fix detection
826                     Add block data read/write support
827  Module i2c-sis645: Detection method change/bugfix
828  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
829  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
830  Module adm1025: Major driver update
831                  Add support for Philips NE1619
832                  Simplify the driver a lot (unified voltages, unified
833                  temperatures and much more)
834                  Fix default voltage limits
835                  Change default temperature limits
836                  Swap remote and local temperatures to match the internal
837                  registers order (make the code unification possible)
838                  Export remote diode fault through alarms
839  Module ddcmon: Major update
840                 Add half a dozen new features
841                 Add checksum parameter (same as for the eeprom module)
842                 Fix monitor limits
843  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
844  Module lm78: Fix a fan_div/fan_min bug
845  Module lm83: Add t_crit and alarms support
846  Module lm90: New
847  Module max6650: New
848  Module saa1064: New
849  Module smsc47m1: Add support for 47M142
850  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
851                   enhance w83627thf support
852  Module w83781d: Enhance chip detection; clean up error returns;
853                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
854  Module xeontemp: New
855  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
856                           Mark Rambus as unsupported
857  Program decode-edid.pl: New
858                          Interfaces between our eeprom module and
859                          parse-edid from the read-edid project
860  Program p4b_smbus: Fix SMP compilation
861  Program sensord: Add support for IT87 (Mike Black)
862                   Change ADM1025 support to match the changes made to
863                   the library
864  Program sensors: Rewrite and enhance EEPROM support
865                   Change LM83 and ADM1025 support to match the changes
866                   made to the library
867                   Add DRDRAM support to print_eeprom
868                   Exit(1) on /proc write failure (Malte Starostik)
869                   Add LM90, MAX6650 support
870  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
871                          Add support for LM82, LM86, LM89
872                          Improved W83781D family detection
873                          Add support for AS19927F rev.2, ASB100 Bach
874                          Add support for Asus Mozart-2 (3 types)
875                          Add support for NE1619
876                          Add support for FSC Hermes
877                          Make sure /sbin is in the user's path
878                          Fix EEPROM detection
879                          Automatic module.conf and /dev/i2c* detection
880                          Improve LM82 and LM83 detection
881                          Handle "to-be-written" cleanly
882                          Add detection for 47M14x Super I/O
883                          Handle the one-address-many-chips-same-driver
884                          case
885
886
8872.8.0 (20030714)
888  NOTE: Requires i2c-2.8.0 or newer!!!
889  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
890                  2.4.13 or later required for mkpatch.
891  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
892                  i2c package
893  File doc/chips/fscscy: Add watchdog documentation
894  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
895  File sensors.h: Now automatically generated
896  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
897           add adm1026, lm83, lm85, w83791d support;
898           Advance version to 2.0.0
899  Makefiles: Generate warnings if new library won't be found by ld.so;
900             Modules now install in kernel/drivers/i2c/[busses,chips];
901             Ensure that headers in /usr/local/include are used first;
902             Don't use /usr/include headers for modules;
903             Handle multiple UTS_RELEASE definitions in linux/version.h;
904             Automatically generate kernel/include/sensors.h;
905             Remove old gzipped modules; remove old misc directory if empty;
906             Remove pre-2.4 installation method;
907             -Wall now the default;
908             Add new targets user, user_install, and help;
909             Run depmod after module installation
910  Modules (all): Cleanups including
911                - Add #include <i2c-proc.h>
912                - C99 initializers
913                - Remove #ifdef MODULE
914                - Remove #ifndef THIS_MODULE
915                - Remove #ifndef MODULE_LICENSE
916                - Remove other 2.1/2.2 #ifdefs
917                - Remove #include "sensors.h", copy SYSCTL defs to module
918                - Remove excess #includes
919                - Remove argument in i2c_register_entry()
920                - Remove dummy xxx_command() definition
921                - Remove EXPORT_NO_SYMBOLS
922                - Remove init_MUTEX #define
923                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
924                  no longer adjust their own refcounts
925                - Use module_init() and module_exit()
926                - Update to new i2c_driver struct definition
927  Modules (bus PCI): Convert to PCI-module-style initialization
928  Modules (several): Add support for AMD Opteron VRM (VID) encoding
929  Module adm1021: Set alarm on failed reads and report old value;
930                  merge changes from kernel 2.5.54
931  Module adm1026: New
932  Module bmcsensors: Fix compile when DEBUG=1
933  Modules ddcmon, eeprom: Use i2c block reads if possible;
934                          better error handling
935  Module ds1307: Add to Makefile
936  Module gl520sm: Fix temperature over/hyst writes
937  Module lm75: merge changes from kernel 2.5.54
938  Module lm83: New
939  Module lm85: New
940  Module i2c-ali1535: Check for invalid transaction
941  Module i2c-ali15x3: Check for invalid transaction
942  Module i2c-amd756: merge changes from kernel 2.5.54;
943                     check for invalid transaction
944  Module i2c-amd8111: merge changes from kernel 2.5.54
945  Module i2c-i801: Add support for 82801EB (ICH5)
946  Module i2c-i810: Fix for some chips
947  Module i2c-nforce2: New
948  Module i2c-piix4: Check for invalid transaction
949  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
950  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
951        north bridges; SiS962 and SiS963 south bridges
952  Module i2c-viapro: Check for invalid transaction
953  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
954          pwm and pwm enable support; update docs
955  Module smbus-arp: Check adapter for HW or SW PEC support;
956                    add reset option
957  Module w83781d: Add support for w83791d
958  Module w83627hf: New
959  Program decode-dimms.pl: Recognize DDR and Rambus
960  Program eeprom: Fix writes for small eeproms
961  Program eeprom, eepromer: Use local i2c-dev.h for build
962  Program fancontrol: New
963  Program lm_sensors.init: Call sensors -s in start()
964  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
965                   Add adm1026,lm85 support;
966                   Remove sensors.c file; add sensors_compat.h;
967                   Remove patches to i2c-core.c and drivers/char/mem.c;
968                   Now works only for kernels 2.4.13 or later
969  Program p4b_smbus: Fix 'make install';
970                     Install in same place as other modules;
971                     Clear correct bits in config word
972  Program pwmconfig: New
973  Program sensors: add adm1026, lm85, w83791d support
974  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
975                          w83627hf, w83627thf, w83697hf);
976                          Add support for SiS651, SiS961, SiS745, SiS746;
977                          Support dmidecode 2.0 and later;
978                          Fix "C" format error;
979                          Add support for adm1026, 82801EB (ICH5), W83791D;
980                          Add support for w83l785ts, nForce2;
981                          Fix UTF-8 incompatibility;
982                          Better support for lm75;
983                          Add support for lm83
984
9852.7.0 (20021208)
986  NOTE: Requires i2c-2.7.0 or newer.
987  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
988  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
989  File doc/busses/i2c-sis645: Add license
990  File doc/chips/lm92: Add license, features
991  File doc/chips/maxilife: Add license, parameters, features
992  File doc/chips/smartbatt: Complete rewrite
993  File doc/chips/vt8231: Add license, parameters
994  File sensors.conf.eg: Add section for lm75; complete the lm78 section
995  Library: Add support for MC1066; add multiple VRM version support for lm87;
996           enhance adm1023 support; initial support for Sony Vaio eeprom;
997           add support for bmcsensors; add hacks for additional dummy drivers
998  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
999            add flags for x86_64 compiles
1000  Module adm1021: Add support for MC1066
1001  Module bmcsensors: New
1002  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1003                   kernel 2.5.43; fix 2.2 kernel compiles
1004  Module gl518sm: Iterate allowed only for rev 0x00
1005  Module i2c-amd756: Configure base address for nForce support;
1006                     check for uninitialized base address;
1007                     add support for amd8111 (SMBus 1.0)
1008  Module i2c-amd8111: New (SMBus 2.0)
1009  Module i2c-ipmb: New
1010  Module i2c-ipmi: New
1011  Module i2c-keywest: Sync with kernel 2.4.20
1012  Module i2c-sis630: Add support for SiS730
1013  Module i2c-sis645: Improve support for SiS645/961;
1014                     add support for SiS645DX/961 and SiS735;
1015                     fix 2.2 kernel compiles
1016  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1017  Module lm87: Add multiple VRM version support
1018  Module vt1211: Fix inx limits and alarms; fix in0
1019  Module vt8231: Fix inx limits and alarms; fix in0
1020  Module w83781d: Fix in0/in1 initialization
1021  Module smartbatt: New
1022  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1023  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1024                           stop decoding on checksum error
1025  Program dmidecode: Fix read bug; upgrade to version 1.8
1026  Program doc-insmod: Complete rewrite; fix author output
1027  Program doc-features: Complete rewrite; handle missing sysctl entries;
1028                        handle unknown prefix with suggestion
1029  Program lm_sensors.init: Remove spaces bug; add green/red output
1030  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1031  Program rrd: Add sanity limits to newly-created RRD.
1032  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1033  Program sensors: Add support for MC1066, Rambus Rimms;
1034                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1035                   initial support for Sony Vaio eeprom
1036  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1037                          IPMI, AMD8111; add help if no sensors found;
1038                          add ACPI method for IBM system detection;
1039                          work with old Perl versions again;
1040                          initial support for Sony Vaio eeprom
1041
10422.6.5 (20020915)
1043  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1044  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1045  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1046  Module dmi_scan: new
1047  Module ds1621: Fix enable/disable
1048  Module eeprom: Do not corrupt 24RF08's when checksum=1
1049  Module i2c-i801: Check for uninitialized base address;
1050                   enable if not enabled
1051  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1052  Module i2c-sis630: new
1053  Module i2c-sis645: new
1054  Module lm92: Fix in-kernel initialization
1055  Module via686a: Remove VT8231 support
1056  Module vt8231: new
1057  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1058  Program dmidecode: new
1059  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1060  Program mkpatch: Add Config.in entries for, lm92,
1061                   pcf8574, pcf8591, smsc47m1, vt1211;
1062                   add dmi_scan
1063  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1064  Program lm_sensors.init: fix stop()
1065  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1066                   add support for logging loadavg in RRD;
1067                   fix down-converting raw labels for RRD;
1068                   update chip support, still behind sensors
1069  Program sensors: Add /usr/local/etc to config file path;
1070                   fix -c and -u flags; add vt8231
1071  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1072                          refuse to run on IBM systems;
1073                          fix sysconfig module numbering;
1074                          change quick write to not corrupt 24RF08's
1075
10762.6.4 (20020719)
1077  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1078  File doc/vid: New
1079  File include/sensors_vid.h: New
1080  File sensors.conf.eg: Add vt1211, smsc47m1
1081  Library: Add multiple VRM version support for adm1025, w83781d;
1082           fix 'flex scanner jammed' on some systems;
1083           add vt1211, smsc47m1, lm92;
1084           fix access mode checking
1085  Makefiles: For 2.4+ kernels, modules now install in
1086             kernel/drivers/[i2c,sensors] , not misc/ , and
1087             'make install' removes old versions in misc/ .
1088             Use $CFLAGS and $CPPFLAGS if defined.
1089  Module adm1025: Add multiple VID version support
1090  Module ds1307: new
1091  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1092                     reliability improvements
1093  Module i2c-hydra: Flush posted writes
1094  Module i2c-i801: Add support for 82801DB (ICH4)
1095  Module i2c-i810: Flush posted writes
1096  Module i2c-savage4: new
1097  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1098  Module i2c-voodoo3: Flush posted writes
1099  Module ds1307: New
1100  Module lm92: New
1101  Module smbus-arp: new
1102  Module smsc47m1: new
1103  Module via686a: Add support for VT8231 sensors
1104  Module vt1211: new
1105  Module w83781d: Add multiple VID version support; fix temp alarms
1106  Program eeprom: new
1107  Program i2cdump: Add smbus block command specification, add PEC support
1108  Program lm_sensors.init: new
1109  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1110                   pcf8574, pcf8591, smsc47m1, vt1211
1111  Program p4b_smbus: Add support for ICH4
1112  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1113  Program sensord.init: Renamed, was prog/init/sensors
1114  Program sensord: Major update, now requires rrd source;
1115                   not compiled by default
1116  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1117                   (don't display algo. and adap.) option;
1118                   add vt1211, smsc47m1, lm92
1119  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1120                          add 82801DB, LM85; fix perl warnings;
1121                          generate /etc/sysconfig/lm_sensors for
1122                          lm_sensors.init script
1123
11242.6.3 (20020322)
1125  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1126  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1127  File doc/chips/it87: add more temp_type help
1128  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1129                        add adm1021 section; add lm87 AIN[1,2] template;
1130                        swap negative voltage limits for 782d,783s,627hf,
1131                        697hf,it87; add more it87 help; swap neg. voltage
1132                        limits for lm78(-j), lm79, w83781d, as99127f
1133  Library: Add PCF8591, W83697HF, ADM1023 support;
1134           fix w83* fan_min computes;
1135           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1136  Module adm1024: Add MODULE_LICENSE("GPL")
1137  Module bt869: Add s-video out and DVD resolution support
1138  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1139  Module fscscy: implement min/max for voltages and fans
1140  Module i2c-amd756: Add support for AMD768
1141  Module i2c-i810: Add support for 810E
1142  Module i2c-keywest: Big update, sync with kernel 2.4.18
1143  Module i2c-piix4: Check for uninitialized base address
1144  Module i2c-sis5595: Blacklist 645, 735
1145  Module i2c-viapro: Check for uninitialized base address
1146  Module gl518sm: Standardize /proc entries in0-3
1147  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1148               fan -> fan1; fix temp2 limit writes
1149  Module pcf8574: Add support for PCF8574A; /proc interface changed
1150  Module pcf8591: new
1151  Module sis5595: Blacklist 645, 735
1152  Module w83781d: Add W83697HF support; allow force_subclients parameter
1153                  for Tyan 2460
1154  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1155  Program decode-vaio.pl: new
1156  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1157                   add text output
1158  Program init/sensors: New SysV init script
1159  Program mkpatch.pl: Add support for fscscy, add more help entries
1160  Program p4b_smbus: new
1161  Program rrd: Install summ_week.cgi
1162  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1163                   clean up chassis intrusion prints
1164  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1165                          fix Via686a and it87 detection;
1166                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1167                          fix uninitialized values; it87 beats lm78
1168
11692.6.2 (20011118)
1170  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1171  Chip Modules (all): malloc.h -> slab.h
1172  Modules (all): Add MODULE_LICENSE("GPL")
1173  File doc/FAQ: More updates and additions
1174  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1175  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1176           update it87 alarm ID's.
1177  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1178  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1179  Module i2c-amd756: Improve busy handling/printk's
1180  Module i2c-i801: Add 82801CA/CAM support
1181  Module i2c-keywest: Sync with PPC people, it works now
1182  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1183  Module i2c-viapro: Add Via VT8233 support
1184  Module it87: Merge alarm_* /proc entries to alarms
1185  Module sis5595: Fix support for rev B0
1186  Module via686a: Make limit initializations reliable
1187  Module w83781d: Allow init=0 parameter to bypass initialization
1188  Program isadump: Add flat address space (PCI) support
1189  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1190                      fscpos, it87, maxilife, mtp008
1191  Program sensors: Fix w83781d temp precision
1192  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1193                          Fujitsu Poseidon and Scylla,
1194                          Intel 82443MX and 82801CA/CAM detection,
1195                          add ITE 8172G detection (driver in kernel 2.4.10)
1196
11972.6.1 (20010830)
1198  File BUGS: Updated
1199  File doc/FAQ: More updates and additions
1200  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1201  File sensors.conf.eg: Fix/enhance it87 section
1202  Library: ds1621 and it87 updates
1203  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1204  Module i2c-amd756: Add AMD 766 support
1205  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1206  Module i2c-piix4: Add Serverworks CSB5 support
1207  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1208  Module adm1025: Fixed temp2 min/max writes
1209  Module ds1621: Add 12-bit precision mode
1210  Module it87: Enable all alarms, add in8 support, add sensor type selection
1211  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1212                  remove support for module
1213  Module sis5595: Recognize unsupported chips and refuse to load
1214  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1215  Program eepromer: new
1216  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1217                      of sensors.c as a module in kernel
1218  Program sensors: it87 updates; adjust temp. precision for some chips
1219  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1220                          recognize unsupported SiS chips;
1221                          recognize AMD 766 and Serverworks CSB5.
1222
12232.6.0 (20010612)
1224  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1225        If your make fails because it can't find <linux/i2c-proc.h>, you
1226        forgot this step!!!
1227  File doc/FAQ: Many, many updates and additions
1228  File doc/busses/i2c-sis5595: new
1229  File doc/busses/i2c-tsunami: new
1230  File doc/chips/it87: new
1231  File doc/chips/via686a: Claim support for 686b.
1232  File README.thinkpad: new
1233  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1234                        Add lm87, adm9240, ds1780, lm81 templates;
1235                        Enhance help comments in file;
1236                        Add Tyan S2510 dual-MTP008 example;
1237                        Make separate sis5595 section.
1238  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1239  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1240  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1241           Add support for maxilife-nba and amd1024;
1242           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1243  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1244  Chip Modules (all): Change from sensors_* to i2c_* globals
1245                      for new i2c-proc.[ch]
1246  Makefiles: enhance to support Alpha architecture
1247  Module adm1021: Fix lm84 and gl523sm support
1248  Module adm1024: new
1249  Module i2c-i801: Chip detection cleanup
1250  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1251  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1252  Module i2c-tsunami: New
1253  Module i2c-via: Ensure i2c bus is tristated correctly.
1254  Module it87: new driver for IT8705, IT8712, Sis950 chips
1255  Module lm78: Recognize chipid=0x20
1256  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1257  Module mtp008: Fix temp initializations;
1258                 Save BIOS pin configuration of temps and fans;
1259                 Fix sensor type reads/writes and fan min writes;
1260                 Fix spurious invalid sensor type messages
1261  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1262                  used for patched kernel now.
1263                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1264  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1265                  Allow force_addr=0xaddr
1266  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1267  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1268                  reading changes; Add messages for subclient
1269                  registration failure
1270  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1271  Program i2cset: new
1272  Program isadump: fix for Alpha arch. compiles
1273  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1274                      Remove ltc1710; Fix i2c_sis5595 typo;
1275                      Support kernel 2.4.5 makefile change;
1276                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1277  Program sens_update_rrd: new
1278  Program sensord: Add -d (debug) and -p (pid-file) options
1279  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1280                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1281                   Change mtp008 temps from max/min to limit/hyst;
1282                   Add maxilife-nba, adm1024, it87 support.
1283  Program sensors-detect: Recognize lm78 with chipid=0x20;
1284                          Recognize SMSC Victory66 South Bridge;
1285                          Add devfs /dev/i2c/x support;
1286                          Add adm1024, it87xx support; Add thinkpad warning.
1287  Program tellerstats: new
1288
12892.5.5 (20010115)
1290  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1291        you have kernel 2.4.0-prerelease or greater.
1292  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1293  File doc/developers/proc: new
1294  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1295  Library: Add ds1621, mtp008 support
1296  Module adm1021: Add support for adm1021a / adm1023
1297  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1298  Module adm1025: Add support for remote temp; rename /proc entries to
1299                  in[0-5] and temp[1-2]; fix negative temp readings
1300  Module adm9240: Rename /proc entries to in[0-5]
1301  Module ddcmon: allow force and force_ddcmon parameters
1302  Module ds1621: new
1303  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1304  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1305  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1306  Module lm87: cleanup, update voltage calculations
1307  Module mtp008: new
1308  Module pcf8574: change update time to 5 seconds
1309  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1310  Module w83781d: fix beep setting via /proc
1311  Programs editticket, readticket: new
1312  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1313  Program mkpatch.pl: more fixes; now adds many more modules
1314  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1315                   add adm1025 temp2; report temp limits correctly as
1316                   min/max or limit/hysteresis; print message if no
1317                   sensors are found. Removed false errors from lm87 reads.
1318  Program sensors-detect: Add ds1621, mtp008 detection;
1319                          add ServerWorks detection
1320
13212.5.4 (20001012)
1322  Module i2c-viapro: Add support for Via 596B (0x3051)
1323  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1324  Program mkpatch.pl: fixed infinite loop
1325  Program sensors-detect: Detect Via 596B (0x3051)
1326
13272.5.3 (20001008)
1328  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1329  File useful_addresses.html: update
1330  Library: Add lm87 support
1331  Module pcf8574: new
1332  Module i2c-ali1535: new
1333  Module i2c-ali15x3: removed force #ifdef.
1334  Module i2c-i801: support Intel 82801BA (815E chipset)
1335  Module i2c-i801: add i2c block write support, fix smbus block bugs
1336                   (requires i2c 2.5.3 package)
1337  Module i2c-i810: support Intel 82815
1338  Module lm87: new
1339  Module sensors: Fix for kernel 2.4.0-test8
1340                  (remove copy_to_user_ret and put_user_ret)
1341  Module w83781d: limit fan divisors to 8 max. for as99127f
1342  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1343  Program i2cdump: Add smbus block read support
1344  Programs i2cdetect, i2cdump: Improve error reporting
1345  Program sensors: new switch -u (--unknown)
1346  Program sensors-detect: detect Intel 82801BA (815E chipset)
1347  Program sensors-detect: detect Intel 82815
1348  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1349  Program sensors-detect: detect National LM87
1350  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1351  Program sensors-detect: Improve error reporting
1352
13532.5.2 (20000709)
1354  File sensors.conf.eg: Fix lm80 in8 calculation
1355  Module w83781d: W83783S no longer crashes on unloading
1356  Program sensors-detect: more robustness in case of unknown i2c adapters
1357  Program sensors-detect, libsensors: fix eeprom size reporting
1358  Program sensord: more flexibility, support for alarm scanning etc.
1359  Program sensors: support for ignore setting on sensor alarms.
1360  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1361
13622.5.1 (20000618)
1363  Library: Add adm1025 support
1364  Module adm1025: new
1365  Module ddcmon: Fixed bus scan which could hang SMBus
1366  Module i2c-keywest: new
1367  Module maxilife: Add support for Maxilife '99 (NBA)
1368  Module via686a: Enable sensors if not enabled by BIOS
1369  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1370  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1371  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1372  Module w83781d: Fis as99127f fan speed (was 66% too high)
1373  Module w83781d: Improve beep input checking
1374  Program i2cdump: Add Winbond-style bank selection
1375  Program isadump: Add Winbond-style bank selection
1376  Program sensors: Add adm1025 support.
1377  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1378  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1379  File sensors.conf.eg: Add Maxilife '99 entries
1380  File sensors.conf.eg: Remove some as99127f entries.
1381    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1382          won't reinstall it) or else 'sensors -s' will fail.
1383
13842.5.0 (20000312)
1385  Dropped all kernel 2.0 and 2.1 compatibility
1386  Module i2c-i810: new
1387  Module ddcmon: new
1388  Module via686a: new
1389  Module i2c-amd756: fixed region request
1390  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1391  Module w83781d: Don't change pin settings at initialization;
1392                  also fix chip detection.
1393  Library: Support for ddcmon and via686a
1394  Program sensors-detect: Support for ddcmon and via686a
1395  Program sensors: Support for eeprom, ddcmon and via686a
1396
13972.4.5 (20000116)
1398  Introduced DESTDIR installation prefix
1399  Module lm80: fixes, temperature now read and set correctly
1400  Module i2c-voodoo3: driver enhancements
1401  Module w83781d: fixes, AS99127 works much better now
1402  Library: New ignore keyword in config file
1403  Programs: Support for new ignore keyword
1404  Program sensors-detect: Support for MGA detections
1405
14062.4.4 (19991201)
1407  Addition of the alpha release of AMD 756 SMBus host support.
1408  Many fixes and updates to the gl518sm driver
1409  Updates and fixes for device detection
1410
14112.4.0 (19990920)
1412  Too much to list.
1413  i2c and smbus parts are split off to a separate i2c package.
1414  New drivers and other stuff.
1415
14162.3.4 (19990616)
1417  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1418  All: Now compiles against kernel 2.0.x (again ;)
1419  Module gl518sm: some updates and refinements
1420
14212.3.3 (19990603)
1422  All: Now compiles against kernel 2.3.x (x >= 1)
1423  Module i2c-voodoo3: Timing issue fixes
1424  Module bt869: Seems to be functional and relatively well tested
1425  Many modules were modified to be more compatible with the new
1426   Mutex structure in the new experimental kernels.
1427
14282.3.2 (19990507)
1429  Module i2c-hydra: Now compiles on 2.0.x kernels
1430  Module i2c-lm75: Slightly better detection
1431  * New, but not compiled by default:
1432  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1433  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1434
14352.3.1 (19990501)
1436  All: Now compiles on PPC
1437  Module i2c-hydra: NEW
1438  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1439  Module w83781d: Removed deadlock (mutex was not initialized)
1440  Documentation: A few glitches removed
1441  Makefile: default module installation directory is now
1442            /lib/modules/current/extra/misc
1443  Program sensors-detect: PPC Hydra now detected
1444  Program sensors: Now prints complete GL518SM information
1445  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1446
14472.3.0 (19990422)
1448  All: Many, many changes and improvements
1449  All: Many small bugs and problems removed
1450  Modules: New insmod parameters
1451  Modules: Much improved chip detection
1452  Module maxilife: NEW
1453  Module adm1021: MAX1617A now also supported
1454  Module adm9240: DS1780 now also supported
1455  Module w83781d: W83782D and W83783S now also supported
1456  Program sensors-detect: NEW
1457  Library: All chips now supported
1458  Documentation: Very much improved
1459
14602.2.2 (199903??)
1461  Just some minor updates and bug fixes.
1462
14632.2.1 (19990218)
1464  All: Removed compile warnings
1465  Module i2c-dev: Small bug removed if DEBUG=1 was used
1466  Module sis5595: Now compiles for 2.0 kernels
1467  Module adm1021: Detection corrected
1468
14692.2.0 (19990216)
1470  All: Set copyrights to include 1999
1471  All: Small bugfixes
1472  I2C: Upgraded to newest archive of Simon Vogl
1473  Module i2c-dev: NEW
1474  Module i2c-ali15x3: NEW
1475  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1476     directories, and somewhat improved
1477  Module sis5595: NEW
1478  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1479  Library: Support for new chip drivers, several small bugs fixed
1480  Library manual pages: NEW
1481  Program i2cdetect: Moved to detect directory
1482  Program detect.pl: NEW
1483  Program doc-features: NEW
1484  Program sensors: Added man-page
1485  Document BUGS: Added cdrom bug and kernel i2c conflict
1486
14872.1.2 (19990116)
1488  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1489  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1490  Documentation in doc/kernel: NEW
1491
14922.1.1 (19990107)
1493  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1494                     and older
1495  Module gl518sm.o: Miscelaneous bugs and problems solved
1496  Program isadump: NEW
1497
14982.1.0 (19981230)
1499  Library: Completely NEW
1500  Program sensors: NEW
1501  Program grab_busses: NEW
1502  Program decode-dimms: More information
1503  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1504  Module w83781d.o: NEW
1505  Module lm80.o: NEW
1506  Module gl518sm.o: new procfile beep, several small updates
1507  Modules: Now use pin readings, no more scaling within the kernel (use the
1508           library instead)
1509
15102.0.2 (19981214)
1511  Module eeprom.o: NEW
1512  Program decode-dimms: NEW
1513  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1514           2.1.58
1515  Modules: Somewhat less verbose on transfers
1516  Module lm78.o now recognizes and handles lm78-j and lm79
1517
15182.0.1 (1998121?)
1519  Module gl518sm.o updates, to make it actually work
1520  Module lm75.o high/low-byte swapping write bug fixed
1521
15222.0.0 (19981209)
1523  Initial release
Note: See TracBrowser for help on using the browser.