root/lm-sensors/trunk/CHANGES @ 4267

Revision 4267, 75.2 KB (checked in by khali, 9 years ago)

libsensors: Get the i2c adapter names from the class device's "name"
attribute, falling back to the device's "name" attribute for
compatibility only. This change is needed to match ongoing cleanups in
Linux 2.6's i2c-core. i2c adapters will soon be class devices only, the
legacy i2c_adapter devices and driver are being removed.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
5  RPM: Obsolete, removed
6  File doc/fan-divisors: Update
7  Library: Add support for the pc87247 driver (fans only)
8           Probe for busses before chips
9           Drop support for algorithm names
10           Add support for coretemp driver   
11           Major update/optimization of config-file scanner
12           Add config-file scanner regression tests
13           Add f71872f support
14           Add w83627dhg support (David Holl, #2157)
15           Get the i2c adapter names from
16  Man page i2cdetect.8: Describe the output convention
17  Man page sensors.1: Update (option -c) and clean up
18  Module i2c-i801: Add ICH9 support
19  Module f71805f: Fix the device address decoding (2.6 backport)
20  Module icspll: Delete. It was useless and dangerous.
21  Program eepromer: Fix loads of warnings
22  Program i2cdetect: Make the output clearer
23  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
24  Programs dump/*: More robust handling of user inputs
25  Program sensord: Add pc87247 support (fans only)
26                   Add vt1211 support (#2150)
27                   Add w83627dhg support (David Holl, #2157)
28  Program sensors: Add pc87247 support (fans only)
29                   Hide error on missing f71805f fan
30                   Handle option -c more efficiently
31                   Drop option -a (show algorithm names)
32                   Add f71872f support
33                   Add w83627dhg support (David Holl, #2157)
34  Program sensors-detect: Add SMSC DME1737 detection
35                          Add Fintek F71882FG and EPoX EP1308 detection
36                          Add Intel Core thermal sensor detection
37                          Preallocate memory for I2C_FUNCS ioctl (#2138)
38                          Prevent misdetection of MAX6633/MAX6634/MAX6635
39                          Add Intel ICH9 detection
40                          Add Maxim MAX6648/MAX6692 detection
41                          Improve ADM1029 detection
42                          Add Andigilog chips detection
43                          Add Intel AMB FB-DIMM thermal sensor detection
462.10.1 (20060924)
47  File doc/developers/checklist renamed to dev/developers/release_checklist
48          with clarifications and updates for new SVN server.
49  File README.package: Delete.
50  File doc/busses/i2c-piix4: Update (2.6 backport)
51  File doc/developers/sysfs-interface: Update
52  File etc/ Add an smsc47m192 section
53                            Comment out all set statements
54                            Add an it8716 section
55                            Add a w83793 section
56                            Adjust the vt1211 section to match the new driver
57                             interface
58  Library: Fix device scan when no i2c support is present
59           Add support for W83627EHF voltage inputs and alarms
60           Add support for the smsc47m192 driver
61           Fix all memory leaks (yeah!)
62           Fix no sensors being reported as an error
63           Add support for the IT8716F and IT8718F chips
64           Add support for the W83793 chip (Yuan Mu)
65           Map the 2.6 adm1026's fan8 to fan0
66           Missing sysfs busses and classes are not errors
67           Change vt1211 temp3-7 magnitude from 1 to 3
68  Makefile: Don't grep autoconf.h on user-space targets
69            Fix depmod on non-running kernel version
70            Remove empty include directories on make user_uninstall
71  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
72  Module i2c-amd756-s4882: Improve static semaphore initialization
73                           (2.6 backport)
74  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
75                   Add ICH8 support (2.6 backport)
76                   Fix block transaction poll loops (2.6 backport)
77                   Remove PCI function check (2.6 backport)
78                   Cleanups (2.6 backport)
79  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
80  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
81                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
82                    Drop the fix_hstcfg parameter (2.6 backport)
83  Module i2c-viapro: Fix compilation with kernels < 2.4.21
84                     Add VT8237A and VT8251
85  Module lm83: Add LM82 support (2.6 backport)
86  Module vt1211: The VT1211 has no in6
87                 Rework the voltage and temperature conversions and the
88                  temperature input order to match the Linux 2.6 driver
89  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
90                  Add specific alarm and beep defines for the W83791D
91  Module w83792d: Fix PWM range (2.6 backport)
92  Program Decode depending on the memory type
93                           Decode the manufacturing date to an ISO8601 date
94                           Add the memory size computation and provide brief
95                            timing characteritics for SDRAM/DDR/DDR2 memory
96                           Add memory size computation for Rambus memory
97                           Various output cleanups and fixes
98  Program Add /usr/sbin or /usr/local/sbin to $PATH if needed
99  Program Detect and skip false positives
100  Program i2cdetect: Add a mode to print adapter functionalities
101  Program i2cdump: Restore bank after bank switching
102                   Add new mode W (read word on even register addresses)
103  Program mkpatch: Fix typo breaking f71805f
104                   Turn warnings on (-w), and fix them
105                   Print a usage message on missing command line parameters
106  Program pwmconfig: Use mktemp instead of tempfile
107  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
108                   Add smsc47m192 support
109                   Add abituguru support (Hans de Goede)
110                   Fix memory leak when printing an unknown chip
111                   Add it8716 and it8718 support
112                   Make each it87 fan and fan div optional
113                   Print missing w83791d values
114                   Add w83793 support (Yuan Mu)
115                   The adt7463 may not have in4 (#2119)
116                   Hide more vt1211 missing input errors
117                   Clearer error messages when no sensors found
118  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
119                          Add ATI IXP200/300/400 SMBus detection
120                          Prevent warning on 64-bit PCI addresses
121                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
122                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
123                           F75384S/M, F75387SG/RG and F81218D detection
124                          Add Winbond W83793R/G and W83627DHG detection
125                          Handle the W83791D driver difference between kernels
126                          Add nForce4 MCP04, MCP51 and MCP55 detection
127                          Add AMD Geode devices detection
128                          Add ITE IT8716F and IT8718F detection
129                          Add NatSemi/Winbond PC87427 detection
130                          Get driver information for busy addresses from
131                           sysfs (2.6 only)
132                          Drop the ISA IT87xxF detection
133                          Check i2c adapter functionalities before probing
134                          Add Intel ICH8 SMBus detection
135                          Add AMD K8 thermal sensors detection
136                          Simplify detection of SiS5595, VIA686 and VT8231
137                          Add Analog Devices ADM1033, ADM1034, ADT7462,
138                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
139                          Check for root user at startup
140                          Attempt to be slightly more user-friendly
141                          Add VT8237A and VT8251
142                          Remove detection of nVidia graphics adapters
143                          Use sysfs for PCI device enumeration
144                          Add generic PCI SMBus adapter detection
145                          Add generic Super-I/O logical device detection
146                          Add SMSC LPC47M172/182 detection
1492.10.0 (20060214)
150  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
151  File doc/busses/i2c-viapro: Update (2.6 backport)
152  File doc/chips/via686a: Update (2.6 backport)
153  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
154  File etc/ Do not set vrm by default
155  File i2c-dev.h: Fix union i2c_smbus_data definition
156                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
157                  Add missing parentheses around macros
158                  Drop I2C_FUNC_SMBUS_EMUL
159                  Drop I2C_FUNC_SMBUS_*_PEC
160                  Drop I2C_SMBUS_*_PEC
161  File sensors_vid.h: Drop default VRM
162  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
163           This is intentional.  Use if you still
164           need your memory SPD data.
165  Library: Big update to use libsysfs.  More TODO though.
166           Fix bus matching code for Linux 2.6 (Karsten Petersen)
167           Add f71805f, w83687thf support
168           Add platform drivers support
169           Fix sysctl warnings on x86_64
170           Restore vt1211 temp1
171  Makefile: Compile user-space programs with -Wundef
172  Module i2c-i801: Simplify the hardware PEC code
173                   Always set PEC mode explicitly before each transaction
174  Module i2c-i810: Documentation update, PCI IDs cleanup
175  Module i2c-keywest: Remove bus probing code (2.6 backport)
176  Module i2c-nforce2: Remove dead code (2.6 backport)
177                      Add the ID of the nForce4 MCP-04 (2.6 backport)
178  Module i2c-via: Remove dead code
179  Module i2c-viapro: Remove dead code
180                     Support I2C block read (2.6 backport)
181                     Code cleanups (2.6 backport)
182                     Improve debug register dump (2.6 backport)
183  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
184          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
185          i2c-sis645: Use pci_driver name to request I/O region; do
186                      not initialize i2c_adapter name to "unset" (2.6
187                      backport)
188  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
189                                              (2.6 backport)
190  Module adm9240: Cleanups (2.6 backport)
191  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
192  Module it87: Minor cleanups
193               Fix fan3_div setting bug (Anton V. Staaf)
194  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
195               Separate the register read function
196               Add PEC support for the ADM1032
197  Module via686a: Cleanups
198  Module w83627hf: Drop useless initialization step (2.6 backport)
199                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
200                   Fix alarms (Yuan Mu)
201                   Preserve fan min on fan div change (Yuan Mu)
202                   Properly handle W83627THF without VID (Yuan Mu)
203                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
204                   Add W83687THF support
205  Module w83781d: Drop W83697HF support (Grant Coady)
206  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
207                  Fix fan control mode (PWM/DC) reporting
208                  Fix fan div auto-adjust (Yuan Mu)
209                  Fix the subclient handling
210  Module w83l785ts: Minor cleanup (2.6 backport)
211  Module vt1211: Restore temp1
212  Modules vt1211, vt8231: Change default VRM to 9.1
213  Program Add lookup tables for manufacturer names
214                           Fix rounding error in PCxxxx speed computation
215                           Improve text output
216                           Improve speed under Linux 2.6
217                           Verify checksum before decoding anything
218                           Improve manufacturing location decoding
219                           Improve memory type detection
220                           Improve part number decoding
221  Program i2cdump: Drop now useless #ifdef tests
222                   Fix capability check for continuous byte mode
223  Program i2cget: New
224  Program i2cset: Add PEC support
225                  Fix argc check
226  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
227                                       Print the correct bus type if bus
228                                       functionality can be queried
229  Program isadump: Display the real addresses in flat mode
230  Program Silently skip already existing nodes
231  Program mkpatch: Include f71805f
232  Program sensord: Do not log algorithm names
233                   Drop EEPROM support (Aurelien Jarno)
234                   Add W83627EHF, F71805F/FG support
235                   Fix PC87365/PC87366 alarms
236  Program sensors: Drop free_the_label
237                   Fix compilation with uclibc (no iconv)
238                   Add f71805f, w83687thf support
239  Program sensors-detect: Drop algorithm names
240                          Do not rely on i2cdetect -l printing algo names
241                          Simplify adapter name matching mechanism
242                          New address for ADM1032, ADT7461
243                          Improve ADT7467, ADT7468 support
244                          Fix MAX6659 reported driver
245                          Add Fintek F71805F detection
246                          Add Analog Devices ADT7476 detection
247                          Add Intel 82845G detection
248                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
249                          Fix udev detection in some corner case
250                          Improve DS1621 detection
251                          Always prefer ISA access over SMBus access
2542.9.2 (20050906)
255  File doc/chips/*: Big update (2.6 backport)
256  Library: Drop ds1780-specific code (now use adm9240)
257           Fix memory leak in sensors_get_label()
258           Support /sys/class/hwmon (Linux 2.6.14+)
259           Limit stack usage in sensors_read_proc_chips()
260  Makefile: Detect 2.6+ kernels and check targets
261  Man page isaset.8: Fix typos
262  Module adm1031: Fix broken kfree() calls
263  Module i2c-ali1563: New (2.6 backport by Winbond)
264  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
265  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
266          w83627hf.c: Tag find function __init
267  Module lm93: Fix memory leak
268  Module smsc47m1: Fix PWM enable polarity on read
269  Modules w83627hf, w83781d: Allow setting fan divisor to 128
270  Program Support Linux 2.6 (Burkart Lingner)
271                           Added DDR/DDR2 frequency reporting in convenient
272                           form of DDRxxx PCyyyy
273  Program i2cdump: Properly handle short i2c block reads
274  Program Fix compile errors
275  Program mkpatch: Include i2c-ali1563
276                   Include w83792d
277  Program pwmconfig: Fix unsafe temporary file use
278  Program rrd: Support 2.6 kernels
279  Program sensord: Add support for w83637hf
280                   Support pc87360 (Henrik Brix Andersen)
281  Program sensors: Support the VAIO "VGN" prefix for eeprom
282  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
283                          Advertise the w83792d driver
284                          Improve IT8705F and IT8712F detection
285                          Merge LM82 and LM83 detection
286                          Add W83687THF detection
2892.9.1 (20050412)
290  File doc/busses/i2c-nforce2: Update
291  File doc/chips/it87: Update
292  File doc/chips/lm90: Update for adt7461
293  File doc/chips/mic74: New
294  File etc/ New sections for lm92 and w83792d
295  Library: Add support for 2.6 fscpos driver (Stefan Ott)
296           Fix sis5595 in4 (Aurelien Jarno)
297           Add support for 2.6 gl520sm driver (Maarten Deprez)
298           Add support for 2.6 bmcsensors driver (Yani Ioannou)
299           Add support for w83792d (Chunhao Huang/Winbond)
300           Add support for 2.6 adt7461 (James Chapman)
301           Add support for 2.6 lm92
302           Add support for 2.6 vt1211
303           Add preliminary support for 2.6 w83627ehf
304  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
305            Use -fno-strict-aliasing on all architectures
306  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
307  Module bmcsensors: Fix compile error
308                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
309  Module ds1621: Fix detection (Aurelien Jarno)
310  Module eeprom: Discard SPD-centric checksum module parameter
311                 Cleanup detection function (backport from Linux 2.6)
312  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
313  Module i2c-i801: Temporarily disable broken I2C block read
314  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
315                   Gelato)
316  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
317  Module i2c-viapro: Prevent repeated resets
318  Module it87: Improve Super-I/O detection
319               Limit I2C address range
320               Support VID on the IT8712F
321  Module lm75: Only initialize CMP/INT bit
322  Module lm78: Fix bug with setting negative temperature limits
323  Module lm85: Properly differentiate between ADM1027 and ADT7463
324               Add EMC6D102 support
325  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
326               Add limited ADT7461 support
327  Module lm93: Fix IN10 (+5V) scaling
328  Module mic74: New
329  Module w83627hf: Support secondary Super-I/O address
330                   Enable temp2 and temp3 if they are disabled
331  Module w83781d: Revert AS99127F temp2 and temp3 computation change
332                  Skip final initialization step for AS99127F chips
333  Module w83792d: New (Chunhao Huang/Winbond)
334  Program ddcmon: New; user-space replacement for the ddcmon driver
335  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
336  Program isadump: Handle Super-I/O keys
337  Program lm_sensors.init: Cleanups (Axel Thimm)
338  Program Add basic command-line interface
339  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
340  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
341                     Don't complain about read-only enable files (lm85)
342                     Fix handling of alternate config file name
343  Program sensord: Fix erroneous error message (Aurelien Jarno)
344                   Support sis5595 in4 (Aurelien Jarno)
345                   Support w83627thf
346                   Support the separate it8712 prefix (Aurelien Jarno)
347  Program sensors: Display sis5595 in4 (Aurelien Jarno)
348                   No errors on missing pc87360 fans
349                   Add gl520sm support (Maarten Deprez)
350                   Improve vt1211 error/ignore handling (Michael Carland)
351                   Support w83792d, w83627ehf
352  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
353                          Improve IT8705F and IT8712F detection
354                          Improve udev detection
355                          Fix DS1621 detection
356                          Add W83627EHF detection
357                          Add ATI SMBus detection
358                          Add VT1211 alias detection
359                          Warn if chip modules not found
360                          Add i2c-ipmi to list if bmcsensors is on it
361                          Add PC87591 detection
362                          Search for correct udev db file name
363                          Add nForce3 250Gb and nForce4 detection
3662.9.0 (20041228)
367  NOTE: Requires i2c-2.9.0 or newer!
368  File README.thinkpad: Update
369  File doc/chips/it87: Cleanups
370  File doc/chips/lm63: New
371  File etc/ Set via686a voltage limits
372  File kernel/chips/ Resync module list with mkpatch
373  File kernel/include/sensors_compat.h: Define __devexit_p if missing
374                                        (kernels 2.4.16 and older)
375  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
376                             and dec_use removed in release 2.8.0
377  Modules (all chip drivers): Remove owner from i2c_driver; pass
378                              controlling_mod to i2c_register_entry() again
379  Module bmcsensors: Support function 1/x
380  Module i2c-amd756: Display the real bus name
381  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
382  Module i2c-i801: Support i2c block read (ICH5 and higher)
383                   Add PEC support for ICH6
384                   Add support for ICH7
385  Module i2c-ipmb: Remove from build since it doesn't work
386  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
387  Module icspll: Fix compilation
388  Module lm63: New driver for the National Semiconductor LM63
389  Module lm83: Use signed types for temperatures
390               Check limits on register writes
391  Module lm87: Round voltages properly
392               Retry on read errors (David Knierim)
393               Less agressive init (no reset)
394  Module lm90: Use signed types for temperatures
395               Check limits on register writes
396  Module lm93: Added module parameter for VID pin input thresholds.
397               Fix typo in dynamic VID alarms
398               Adds a couple log messages for failed transactions (David
399               Knierim)
400               Fix compilation breaking C99-ism (Axel Thimm)
401               Fix block read retries
402  Module pc87360: Support secondary Super-I/O address
403  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
404  Library: Add lm63 support
405           Add lpc47b397 support
406  Programs *.init: Rename lockfile to match file name
407  Programs i2cset, isaset: Written byte/word can be masked
408  Program Find eeproms on non-0 i2c bus too
409  Program mkpatch: Include i2c-amd756-s4882
410  Program pwmconfig: Handle new (well, back to old) pwm files names for
411                     Linux 2.6.10 and up
412  Program sensord: Do not scale load average (Aurelien Jarno)
413  Program sensors: Add lm63, lpc47b397 support
414                   Support DDR2 memory module EEPROMs (Rudolf Marek)
415                   Support only one location for the default configuration file
416                   Display the default configuration file location in --help
417                   Simplify the configuration file opening code
418  Program sensors-detect: Improve LM63 detection
419                          Discard IBM Thinkpad detection code
420                          Add PCA9556, LPC47B397, ICH7 detection
421                          Fix W83792D detection, add W83791SD detection
4242.8.8 (20041007)
425  File doc/donations: Update
426  File doc/lm_sensors-FAQ.texi: Add 4.6.1
427                                Update 4.7
428  File doc/chips/gl518sm: Update "iterate" info
429  File doc/chips/it87: Discard outdated module parameters
430  File doc/chips/lm75: LM77 is not supported
431  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
432  File doc/chips/lm93: New
433  File doc/chips/w83l785ts: Improvements
434  File etc/ Fix it87 lines order
435                            Update lm87 section
436  File kernel/include/sensors_vid.h: Support VRM 10.0
437  Library: Support 2.6 adm1025
438           Preliminary support for 2.6 lm87
439           Support 2.6 adm9240
440           Allow an alternative sysfs file name for chip features (2.6)
441           Fix lm83 critical limits (2.6)
442           Add lm93 support
443           Prevent some procfs errors from being silently ignored
444  Makefiles: Implement user_uninstall (Rudolf Marek)
445             Spoof LOGNAME and HOSTNAME when making html man pages
446  Module adm1025: Refine detection
447                  Update limit registers again (revert of 2.8.1)
448                  Init high limits if they read 0
449                  Fix conversions
450  Module lm75: Refine detection
451  Module lm78: Fix init
452  Module lm83: Default to kind lm83 if forced.
453               Fix temperature macros.
454  Module lm90: Add LM86, MAX6657 and MAX6658 support
455  Module lm93: New
456  Module mtp008: Fix the setting of limits on temp2
457  Module pca9540: Refine detection
458  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
459                  Support VID
460                  Fix fan_div file when fan count is less than 3
461                  Additional init and debug
462  Module smsc47m1: Fix pwm_enable being inverted
463  Module w83627hf: Add alternate VCORE/in0 calculation method
464                   Remove reset of chip by driver on initialization
465  Module w83781d: Fix default VRM for w83791d
466  Module w83l785ts: Implement read error handling (backport from 2.6)
467  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
468                    Wait for user input to continue (as opposed to 5 sec
469                    delay), can be skipped with -y
470                    Various cleanups and code refactoring
471                    Update manual pages
472  Program fancontrol.init: New (Dean Takemori)
473  Program Restore fans on many kinds of errors/interrupts
474  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
475                           (Giuseppe Della Bianca)
476  Program Detect devfs and refuse to run
477                    Use mknod's mode instead of chmod
478  Program mkpatch: Include xeontemp and pc87360
479  Program sensors: Rework adm1025 support
480                   Display pc87365/pc87366 VID
481                   Improve smsc47m1 support
482                   Hide 2.6 adm1027 alarm_mask being missing
483                   Print VRM version for all supported chips
484  Program sensors-detect: Support LM93, LM77, LM63
485                          Support PC8739x Super-I/O family (no sensors)
486                          Fix PCA9540 support
487                          Refine ADM1025/ADM1025A detection
488                          Refine LM75 detection
489                          Ignore missing /proc/modules (Andras Bali)
490                          Script-wide Perl cleanups
491                          Support udev
492                          Support W83792D, LM96000
4952.8.7 (20040611)
496  File README.thinkpad: Update 24RF08 status
497  File doc/fan-divisors: More info on accuracy
498  File doc/lm_sensors-FAQ.texi: Update 4.27
499  File doc/chips/adm1031: New
500  File doc/chips/max1619: New
501  File doc/chips/pc87360-fan: Renamed to pc87360
502  File doc/chips/pc87360: Big update
503  File doc/chips/w83781d: Update AS99127F documentation
504  File etc/ Add comments about BP6 voltages
505                            Add comment on Asus A7V8X-X VCore
506                            Misc fixes to lm80 section
507                            Update via686a section
508                            New lm99 section
509                            Add section for LM85-like chips
510                            Preliminary pc87366 section
511                            Add comment on GL520SM application modes
512                            Document beep_enable (Aurelien Jarno)
513                            Preliminary max1619 section
514                            Preliminary adm1030 and adm1031 sections
515  Library: Fix 2.6 VRM
516           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
517           Fully support the PC87360 family
518           Support the lm99
519           Add version and date strings
520           Support 2.6 max1619
521  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
522  Man page i2cdetect.8: document new command line flags
523  Man page i2cdump.8: More details on how i2cdump can write to a chip
524  Modules (all chip drivers): Rework memory allocation scheme.
525  Module adm1031: New (Alexandre d'Alton)
526  Module bmcsensors: Fix oops by creating thread for initialization
527  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
528  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
529          asb100.c, lm92.c: Use swab16
530  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
531  Module gl520sm: Less agressive initialization process
532                  Fix temp1 limits being unsettable in application
533                  Ensure that temp2 and in4 are not used at the same time
534  Module i2c-i801: Support 6300ESB and ICH6
535  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
536  Module i2c-sis645: Add support for SiS655
537  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
538  Module lm90: Support LM99 and LM89
539  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
540               Get rid of useless i2c_probe call
541  Module max1619: New (Alexey Fisher)
542  Module p4b_smbus: Add support for mobile versions of the 82801
543                    (Axel Thimm)
544  Module pc87360-fan: Renamed to pc87360
545  Module pc87360: Also support PC87365 and PC87366
546                  Add write support
547                  Correctly set the chip name depending on the type
548                  Add voltage and temperature support
549                  Fix fan speed computation
550                  Retrieve fans configuration from Super-I/O space
551                  Export pwm_enable (read-only)
552                  Honor pwm invert bits
553                  Clear fan alarms after we read them
554                  Do not read fan data when monitoring is disabled
555                  Do not include SENSORS_INSMOD stuff
556                  New module parameter: init
557                  Fan clock dividers change automatically
558                  Add thermistor dupport
559  Module smsc47m1: Lock on reads and writes
560                   Various PWM fixes
561  Module thmc50: Fix address range
562  Module via686a: Fix voltage roundings
563                  Simplify temperature conversions
564  Module w83781d: Drop PWM support for as99127f
565                  Invert AS99127F beep bits in driver rather than user-space
566  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
567  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
568  Program New
569  Program i2cdetect: Adapt probing method to address
570                     Add -q and -r flags to force probing methods
571                     Allow probing range selection
572  Program isadump: Major improvements
573  Program isaset: New
574  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
575                   module
576                   Include i2c-nforce2
577  Program sensord: New --rrd-no-average parameter
578                   Syncronize time slots with rrd
579                   Fix W83781D temp3 alarm (Aurelien Jarno)
580                   Add ASB100 support (Andrew May)
581  Program sensors: Fully support the PC87360 family
582                   Fix lm80 temperature alarms
583                   Support the lm99
584                   Do not invert AS99127F beep bits anymore
585                   Fix W83781D temp3 alarm (Aurelien Jarno)
586                   Print library version string
587  Program sensors-detect: Rework Super I/O detection
588                          Support SiS655/SiS96x
589                          Support ADT7461 and ADT7467
590                          Better support for ADM1027, ADT7460 and ADT7463
591                          Explicitly support ADM1028
592                          Scan all logical devices of PC87365 and PC87366
593                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
594                          Detect eeproms with software write protect (not
595                          enabled by default)
596                          Support ALi 1563 (2.6 only)
597                          Drop LTC1710 support
598                          Use byte reads for probing on ranges 0x30-0x37 and
599                          0x50-0x5F
600                          Improve LM89 and LM99 support
601                          Support GeForce FX 5900 video cards
602                          Fix devfs misdetection (Aurelien Jarno)
603                          Detect 6300ESB, ICH6
604                          Fix double detection of ISA chips
605                          Support MAX1619
606                          Support PC87373 Super-I/O
607                          Fix unknown adapters appearing multiple times
608                          Refine MAX6650/MAX6651 detection
6112.8.6 (20040405)
612  File README.thinkpad: Update status
613  File doc/chips/pca9540: New
614  File doc/chips/pc87360-fan: New
615  File etc/ Update pcf8591 default configuration
616  Library: Switch to new sysfs naming standard
617           Fix gcc 3.3 warnings (Philipp Thomas)
618           Support 2.6 ds1621 and pcf8591
619           Change pcf8591 magnitudes
620           Support pc87360-fan
621  Makefile: Install shared library 755
622  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
623  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
624  Modules ds1621, pcf8591: Check for capabilities before using them
625                           (Aurelien Jarno)
626  Modules pcf8574, pcf8591: Cleanups
627  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
628  Module adm1021: Better detection and initialization
629  Module pca9540: New driver for the Philips PCA9540
630  Module pc87360-fan: New driver for the National Semiconductor PC87360,
631                      PC87363 and PC87364 Super I/O chips
632  Module smsc47m1: Support the LPC47B27x
633  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
634  Program i2cdetect: Skip special addresses by default
635  Program sensord: Prevent null pointer dereference (Tim Toohey)
636  Program sensors: Print the degree symbol in the terminal's current locale
637                   (Aurelien Jarno)
638                   Update pcf8591 print to support 2.6 driver
639                   Support pc87360-fan
640  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
641                          Improved SiS chips support
642                          Add a white list of IBM systems
643                          Drop support of undetectable adapters
644                          Fix smart battery detection
645                          Add smart battery charger and manager detection
646                          Rework adm1021 and clones detection
647                          The PC87360, PC87363 and PC87364 Super I/O chips
648                          now have a (preliminary) driver
649                          Rework Super I/O detection
650                          Better support of devfs
651  Program New
6542.8.5 (20040305)
655  File doc/chips/SUMMARY: Update
656  File etc/ Epox 8K3A tweaks. (Kronos)
657  Makefiles hotplug and rrd: Remove -o and -g arguments to install
658  Module bmcsensors: Increase max SDRs to 100
659  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
660  Module i2c-amd756: Don't register driver to avoid driver conflicts.
661                     (Daniel Rune Jensen)
662  Module it87: Better temperature sensor types handling (Takeru Komoriya)
663               Fix reset=1 (Takeru Komoriya)
664  Module lm80: Code cleanups
665  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
666  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
667  Module w83627hf: Add w83637hf support
668                   Fix exported name
669                   Fix PWM in w83627thf
670                   Preserve other bits when forcing temp2/3 to comparator mode
671  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
672                  Remove asb100 support
673  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
674          Define driver ID if i2c-id.h doesn't have it yet.
675  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
676          Backport oops fix from Linux 2.6.
677  Modules (all chips): Get rid of useless headers
678  Program Add sysfs support
679  Program sensors: Add w83637hf support
680                   Add support for Shuttle Ethernet EEPROMs
681                   Drop 2.6 subclient detection
682  Program sensors-detect: Add heuristics to the LM80 detection function
683                          Add support for W83L785R, improve W83L784R/AR
684                          Add GeForce FX 5600 as supported by rivatv
685                          More Super IO chips, better handling
686  Library: Update to match renames in fscher
687           Reverse temporary changes to w83l785ts mappings
688           Fix vt1211 and vt8231 uch_config not being writable
689           Add 2.6 lm80 support
690           Add w83637hf support
691           Remove in6 and temp1 from vt1211 and vt8231
692           Add support for Shuttle Ethernet EEPROMs
693           Remove unused as99127f features
6962.8.4 (20040207)
697  File doc/lm_sensors-FAQ.texi: Update 4.20.
698  File doc/chips/it87: Change hyst to low
699  File doc/chips/w83l785ts: New
700  File etc/ Change it87 hyst to low
701                            Fix w83697hf supposed to have temp3
702                            Limits initialization for adm1025/ne1619
703                            Handle fscher voltage conversions
704                            Add Tyan Trinity S2495 KT400 setup (Eric
705                              Schumann)
706                            Fix fscher fan labels (Reinhard Nissl)
707  Library: Better 2.6 eeprom support
708           Change it87 hyst to low
709           Add 2.6 gl518sm, fscher support
710           Fix 2.6 negative voltages handling
711           Temporary fix to w83l785ts mappings
712  Module adm1025: Separate prefix for NE1619
713  Module adm1026: Remove use of temporary ID
714                  Define addresses as a range
715  Module bmcsensors: Fix reservations
716  Module fscher: Externalize voltage conversions
717  Module eeprom: Remove memtype
718  Module i2c-piix4: Fix resource release error
719                    Various cleanups
720  Program Add sysfs support
721  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
722                   Drop linux 2.2 support
723                   Add w83627hf
724  Program sensors: Do not show algorithm by default
725                   Cleanup temperature unit display code
726                   Cleanup label spacing code
727                   Fix output to UTF-8 terms (Marcel Sebek)
728                   Simplify gl518sm print
729                   Do not ignore errors in FSC chips prints
730                   Fix w83l785ts print
731                   Cleanup FSC chips prints
732  Program sensors-detect: Fix PATH issues
733                          Correctly point to the fscher driver
7362.8.3 (20040115)
737  File lm_sensors.spec: Update
738  Library: Add 2.6 eeprom, lm90 support
739           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
740  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
741  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
742  Module i2c-amd756: Fix byte writes
743  Module i2c-tsunami: Cleanups (Daniel Nilsson)
744  Module it87: Fix sg_tlx writes; fix sensor type reporting;
745               add 8712 Super I/O detection;
746               remove initialization of temp_type and fan_ctl;
747               remove init and temp_type module parameters
748  Module lm90: Handle hysteresis differently
749  Module smartbatt: Fix detection, magnitudes, temp
750  Module w83781d: Fix negative voltages
751  Module w83l785ts: New
752  Program eeprog: Make 8 bit mode the default
753  Program fancontrol: Improvements, fixes, support 2.6 kernels
754  Program mkpatch: Add lm75.h
755  Program pwmconfig: Improvements, fixes, support 2.6 kernels
756  Program sensors: Add ASB100 support
757  Program sensors-detect: Add 8712 Super I/O detection;
758                          add W83L785TS detection
7612.8.2 (20031211)
762  IMPORTANT: Limit initialization removed from all chip drivers!
763             If you didn't run 'sensors -s' in the past you may need to now!
764  File Change lm75 scaling back to 1;
765                        Add example for asb100
766  Library: Fix bmcsensors scaling, increase number of sensors;
767           Add w83627thf support; Advance version to 3.0.0;
768           Add hermes, ADM1032, ASB100 support;
769           Add it87 sensor type support;
770           Add sysfs support for kernel 2.6;
771           Fix memory leaks
772  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
773             Fail if no kernel .config file exists;
774             Don't build module dependencies for user and user_install
775  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
776          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
777          smsc47m1, thmc50, via686a, w83627hf, w83781d:
778          Remove initialization of limits by driver.
779  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
780  Modules (chip): Init cleanups
781  Module asb100: New
782  Module bmcsensors: Fix voltage scaling, voltage and fan limits
783  Modules ddcmon, eeprom: Add failure printks
784  Module fscher: New (Fujitsu-Siemens Hermes driver)
785  Module i2c-amd756: Fix AMD8111 support
786  Module i2c-amd8111: Fix byte writes
787  Module i2c-nforce2: Fix byte writes
788  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
789  Module i2c-sis630: Sync with 2.6.0-X driver version
790  Module i2c-viapro: Add support for Via 8237
791  Module it87: Add pwm and "smart guardian" support;
792               add it87 sensor type support
793  Module lm75: Fix negative voltages
794  Module lm90: Add ADM1032 support
795  Module w83781d: Fix 791d and 627hf detection
796  Module w83627hf: Add VID support
797  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
798  Program eeprog: New
799  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
800                                       support sysfs for i2c bus search
801  Program i2cdetect: Add -l option to list busses
802  Program i2cdump: Add 'c' mode for consective address reads
803  Program mkpatch: Cleanups
804  Program pwmconfig: Handle multiple fans controlled by a single pwm
805  Program sensord: Remove ddcmon support
806  Program sensors: Add ADM1032 support; add messages for sysfs
807  Program sensors-detect: Prefer Super I/O drivers;
808                          Fix W83627HF and W83791D detection; detect CSB6;
809                          Detect ADM1029, ADM1030, ADM1031;
810                          Detect W83637HF, W83697UF;
811                          Add it87 sensor type support; add sysfs support
812                          Reduce lm80 misdetects; remove PCFxxxx "detection"
813                          Detect VT8237 (KT600)
814                          Use VPD instead of DMI+ACPI for Thinkpad detection
815                          Suggest new asb100 driver instead of w83781d
8182.8.1 (20031005)
819  NOTE: Requires i2c-2.8.1 or newer!
820  File Improved adm1025 section
821                        Default temp labels for as99127f
822                        Improved lm83 section
823                        Better support for Asus A7V8X-X
824  File doc/chips/SUMMARY: Add SMSC manufacturer ID
825  File doc/chips/adm1025: Add decent documentation (almost new)
826  File doc/chips/lm83: Known motherboards list update, misc updates
827  Library: Change adm1025 names (hyst/over become low/high)
828           Swap adm1025 temp1 and temp2 to match the driver's order
829           Advance version to 2.0.1
830           Update lm83 support
831           Add support for lm90, xeontemp, max6650
832           Add separate messages for read and write errors
833           Add missing message for parse error
835  Modules (various): Fix includes for compilation on Alpha
836                     Use the new i2c_delay function instead of the various
837                     do_pause functions
838  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
839  Module i2c-nforce2: Cleanups
840  Module i2c-i810: Use readl/writel for portable access to PCI memory
841  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
842  Module i2c-savage4: Use readl/writel for portable access to PCI memory
843  Module i2c-sis630: Fix detection
844                     Add block data read/write support
845  Module i2c-sis645: Detection method change/bugfix
846  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
847  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
848  Module adm1025: Major driver update
849                  Add support for Philips NE1619
850                  Simplify the driver a lot (unified voltages, unified
851                  temperatures and much more)
852                  Fix default voltage limits
853                  Change default temperature limits
854                  Swap remote and local temperatures to match the internal
855                  registers order (make the code unification possible)
856                  Export remote diode fault through alarms
857  Module ddcmon: Major update
858                 Add half a dozen new features
859                 Add checksum parameter (same as for the eeprom module)
860                 Fix monitor limits
861  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
862  Module lm78: Fix a fan_div/fan_min bug
863  Module lm83: Add t_crit and alarms support
864  Module lm90: New
865  Module max6650: New
866  Module saa1064: New
867  Module smsc47m1: Add support for 47M142
868  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
869                   enhance w83627thf support
870  Module w83781d: Enhance chip detection; clean up error returns;
871                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
872  Module xeontemp: New
873  Program Add Direct Rambus (DRDRAM)
874                           Mark Rambus as unsupported
875  Program New
876                          Interfaces between our eeprom module and
877                          parse-edid from the read-edid project
878  Program p4b_smbus: Fix SMP compilation
879  Program sensord: Add support for IT87 (Mike Black)
880                   Change ADM1025 support to match the changes made to
881                   the library
882  Program sensors: Rewrite and enhance EEPROM support
883                   Change LM83 and ADM1025 support to match the changes
884                   made to the library
885                   Add DRDRAM support to print_eeprom
886                   Exit(1) on /proc write failure (Malte Starostik)
887                   Add LM90, MAX6650 support
888  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
889                          Add support for LM82, LM86, LM89
890                          Improved W83781D family detection
891                          Add support for AS19927F rev.2, ASB100 Bach
892                          Add support for Asus Mozart-2 (3 types)
893                          Add support for NE1619
894                          Add support for FSC Hermes
895                          Make sure /sbin is in the user's path
896                          Fix EEPROM detection
897                          Automatic module.conf and /dev/i2c* detection
898                          Improve LM82 and LM83 detection
899                          Handle "to-be-written" cleanly
900                          Add detection for 47M14x Super I/O
901                          Handle the one-address-many-chips-same-driver
902                          case
9052.8.0 (20030714)
906  NOTE: Requires i2c-2.8.0 or newer!!!
907  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
908                  2.4.13 or later required for mkpatch.
909  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
910                  i2c package
911  File doc/chips/fscscy: Add watchdog documentation
912  File Fix vt1211/vt8231 thermistor calculations
913  File sensors.h: Now automatically generated
914  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
915           add adm1026, lm83, lm85, w83791d support;
916           Advance version to 2.0.0
917  Makefiles: Generate warnings if new library won't be found by;
918             Modules now install in kernel/drivers/i2c/[busses,chips];
919             Ensure that headers in /usr/local/include are used first;
920             Don't use /usr/include headers for modules;
921             Handle multiple UTS_RELEASE definitions in linux/version.h;
922             Automatically generate kernel/include/sensors.h;
923             Remove old gzipped modules; remove old misc directory if empty;
924             Remove pre-2.4 installation method;
925             -Wall now the default;
926             Add new targets user, user_install, and help;
927             Run depmod after module installation
928  Modules (all): Cleanups including
929                - Add #include <i2c-proc.h>
930                - C99 initializers
931                - Remove #ifdef MODULE
932                - Remove #ifndef THIS_MODULE
933                - Remove #ifndef MODULE_LICENSE
934                - Remove other 2.1/2.2 #ifdefs
935                - Remove #include "sensors.h", copy SYSCTL defs to module
936                - Remove excess #includes
937                - Remove argument in i2c_register_entry()
938                - Remove dummy xxx_command() definition
939                - Remove EXPORT_NO_SYMBOLS
940                - Remove init_MUTEX #define
941                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
942                  no longer adjust their own refcounts
943                - Use module_init() and module_exit()
944                - Update to new i2c_driver struct definition
945  Modules (bus PCI): Convert to PCI-module-style initialization
946  Modules (several): Add support for AMD Opteron VRM (VID) encoding
947  Module adm1021: Set alarm on failed reads and report old value;
948                  merge changes from kernel 2.5.54
949  Module adm1026: New
950  Module bmcsensors: Fix compile when DEBUG=1
951  Modules ddcmon, eeprom: Use i2c block reads if possible;
952                          better error handling
953  Module ds1307: Add to Makefile
954  Module gl520sm: Fix temperature over/hyst writes
955  Module lm75: merge changes from kernel 2.5.54
956  Module lm83: New
957  Module lm85: New
958  Module i2c-ali1535: Check for invalid transaction
959  Module i2c-ali15x3: Check for invalid transaction
960  Module i2c-amd756: merge changes from kernel 2.5.54;
961                     check for invalid transaction
962  Module i2c-amd8111: merge changes from kernel 2.5.54
963  Module i2c-i801: Add support for 82801EB (ICH5)
964  Module i2c-i810: Fix for some chips
965  Module i2c-nforce2: New
966  Module i2c-piix4: Check for invalid transaction
967  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
968  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
969        north bridges; SiS962 and SiS963 south bridges
970  Module i2c-viapro: Check for invalid transaction
971  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
972          pwm and pwm enable support; update docs
973  Module smbus-arp: Check adapter for HW or SW PEC support;
974                    add reset option
975  Module w83781d: Add support for w83791d
976  Module w83627hf: New
977  Program Recognize DDR and Rambus
978  Program eeprom: Fix writes for small eeproms
979  Program eeprom, eepromer: Use local i2c-dev.h for build
980  Program fancontrol: New
981  Program lm_sensors.init: Call sensors -s in start()
982  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
983                   Add adm1026,lm85 support;
984                   Remove sensors.c file; add sensors_compat.h;
985                   Remove patches to i2c-core.c and drivers/char/mem.c;
986                   Now works only for kernels 2.4.13 or later
987  Program p4b_smbus: Fix 'make install';
988                     Install in same place as other modules;
989                     Clear correct bits in config word
990  Program pwmconfig: New
991  Program sensors: add adm1026, lm85, w83791d support
992  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
993                          w83627hf, w83627thf, w83697hf);
994                          Add support for SiS651, SiS961, SiS745, SiS746;
995                          Support dmidecode 2.0 and later;
996                          Fix "C" format error;
997                          Add support for adm1026, 82801EB (ICH5), W83791D;
998                          Add support for w83l785ts, nForce2;
999                          Fix UTF-8 incompatibility;
1000                          Better support for lm75;
1001                          Add support for lm83
10032.7.0 (20021208)
1004  NOTE: Requires i2c-2.7.0 or newer.
1005  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1006  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1007  File doc/busses/i2c-sis645: Add license
1008  File doc/chips/lm92: Add license, features
1009  File doc/chips/maxilife: Add license, parameters, features
1010  File doc/chips/smartbatt: Complete rewrite
1011  File doc/chips/vt8231: Add license, parameters
1012  File Add section for lm75; complete the lm78 section
1013  Library: Add support for MC1066; add multiple VRM version support for lm87;
1014           enhance adm1023 support; initial support for Sony Vaio eeprom;
1015           add support for bmcsensors; add hacks for additional dummy drivers
1016  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1017            add flags for x86_64 compiles
1018  Module adm1021: Add support for MC1066
1019  Module bmcsensors: New
1020  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1021                   kernel 2.5.43; fix 2.2 kernel compiles
1022  Module gl518sm: Iterate allowed only for rev 0x00
1023  Module i2c-amd756: Configure base address for nForce support;
1024                     check for uninitialized base address;
1025                     add support for amd8111 (SMBus 1.0)
1026  Module i2c-amd8111: New (SMBus 2.0)
1027  Module i2c-ipmb: New
1028  Module i2c-ipmi: New
1029  Module i2c-keywest: Sync with kernel 2.4.20
1030  Module i2c-sis630: Add support for SiS730
1031  Module i2c-sis645: Improve support for SiS645/961;
1032                     add support for SiS645DX/961 and SiS735;
1033                     fix 2.2 kernel compiles
1034  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1035  Module lm87: Add multiple VRM version support
1036  Module vt1211: Fix inx limits and alarms; fix in0
1037  Module vt8231: Fix inx limits and alarms; fix in0
1038  Module w83781d: Fix in0/in1 initialization
1039  Module smartbatt: New
1040  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1041  Program Code cleanup; valid HTML; better HTML output;
1042                           stop decoding on checksum error
1043  Program dmidecode: Fix read bug; upgrade to version 1.8
1044  Program doc-insmod: Complete rewrite; fix author output
1045  Program doc-features: Complete rewrite; handle missing sysctl entries;
1046                        handle unknown prefix with suggestion
1047  Program lm_sensors.init: Remove spaces bug; add green/red output
1048  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1049  Program rrd: Add sanity limits to newly-created RRD.
1050  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1051  Program sensors: Add support for MC1066, Rambus Rimms;
1052                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1053                   initial support for Sony Vaio eeprom
1054  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1055                          IPMI, AMD8111; add help if no sensors found;
1056                          add ACPI method for IBM system detection;
1057                          work with old Perl versions again;
1058                          initial support for Sony Vaio eeprom
10602.6.5 (20020915)
1061  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1062  File Fix temp[23] for as99127f; add vt8231
1063  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1064  Module dmi_scan: new
1065  Module ds1621: Fix enable/disable
1066  Module eeprom: Do not corrupt 24RF08's when checksum=1
1067  Module i2c-i801: Check for uninitialized base address;
1068                   enable if not enabled
1069  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1070  Module i2c-sis630: new
1071  Module i2c-sis645: new
1072  Module lm92: Fix in-kernel initialization
1073  Module via686a: Remove VT8231 support
1074  Module vt8231: new
1075  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1076  Program dmidecode: new
1077  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1078  Program mkpatch: Add entries for, lm92,
1079                   pcf8574, pcf8591, smsc47m1, vt1211;
1080                   add dmi_scan
1081  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1082  Program lm_sensors.init: fix stop()
1083  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1084                   add support for logging loadavg in RRD;
1085                   fix down-converting raw labels for RRD;
1086                   update chip support, still behind sensors
1087  Program sensors: Add /usr/local/etc to config file path;
1088                   fix -c and -u flags; add vt8231
1089  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1090                          refuse to run on IBM systems;
1091                          fix sysconfig module numbering;
1092                          change quick write to not corrupt 24RF08's
10942.6.4 (20020719)
1095  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1096  File doc/vid: New
1097  File include/sensors_vid.h: New
1098  File Add vt1211, smsc47m1
1099  Library: Add multiple VRM version support for adm1025, w83781d;
1100           fix 'flex scanner jammed' on some systems;
1101           add vt1211, smsc47m1, lm92;
1102           fix access mode checking
1103  Makefiles: For 2.4+ kernels, modules now install in
1104             kernel/drivers/[i2c,sensors] , not misc/ , and
1105             'make install' removes old versions in misc/ .
1106             Use $CFLAGS and $CPPFLAGS if defined.
1107  Module adm1025: Add multiple VID version support
1108  Module ds1307: new
1109  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1110                     reliability improvements
1111  Module i2c-hydra: Flush posted writes
1112  Module i2c-i801: Add support for 82801DB (ICH4)
1113  Module i2c-i810: Flush posted writes
1114  Module i2c-savage4: new
1115  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1116  Module i2c-voodoo3: Flush posted writes
1117  Module ds1307: New
1118  Module lm92: New
1119  Module smbus-arp: new
1120  Module smsc47m1: new
1121  Module via686a: Add support for VT8231 sensors
1122  Module vt1211: new
1123  Module w83781d: Add multiple VID version support; fix temp alarms
1124  Program eeprom: new
1125  Program i2cdump: Add smbus block command specification, add PEC support
1126  Program lm_sensors.init: new
1127  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1128                   pcf8574, pcf8591, smsc47m1, vt1211
1129  Program p4b_smbus: Add support for ICH4
1130  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1131  Program sensord.init: Renamed, was prog/init/sensors
1132  Program sensord: Major update, now requires rrd source;
1133                   not compiled by default
1134  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1135                   (don't display algo. and adap.) option;
1136                   add vt1211, smsc47m1, lm92
1137  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1138                          add 82801DB, LM85; fix perl warnings;
1139                          generate /etc/sysconfig/lm_sensors for
1140                          lm_sensors.init script
11422.6.3 (20020322)
1143  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1144  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1145  File doc/chips/it87: add more temp_type help
1146  File Un-ignore it87 in8, temp3, fan3;
1147                        add adm1021 section; add lm87 AIN[1,2] template;
1148                        swap negative voltage limits for 782d,783s,627hf,
1149                        697hf,it87; add more it87 help; swap neg. voltage
1150                        limits for lm78(-j), lm79, w83781d, as99127f
1151  Library: Add PCF8591, W83697HF, ADM1023 support;
1152           fix w83* fan_min computes;
1153           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1154  Module adm1024: Add MODULE_LICENSE("GPL")
1155  Module bt869: Add s-video out and DVD resolution support
1156  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1157  Module fscscy: implement min/max for voltages and fans
1158  Module i2c-amd756: Add support for AMD768
1159  Module i2c-i810: Add support for 810E
1160  Module i2c-keywest: Big update, sync with kernel 2.4.18
1161  Module i2c-piix4: Check for uninitialized base address
1162  Module i2c-sis5595: Blacklist 645, 735
1163  Module i2c-viapro: Check for uninitialized base address
1164  Module gl518sm: Standardize /proc entries in0-3
1165  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1166               fan -> fan1; fix temp2 limit writes
1167  Module pcf8574: Add support for PCF8574A; /proc interface changed
1168  Module pcf8591: new
1169  Module sis5595: Blacklist 645, 735
1170  Module w83781d: Add W83697HF support; allow force_subclients parameter
1171                  for Tyan 2460
1172  Programs, Update for new /proc names
1173  Program new
1174  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1175                   add text output
1176  Program init/sensors: New SysV init script
1177  Program Add support for fscscy, add more help entries
1178  Program p4b_smbus: new
1179  Program rrd: Install summ_week.cgi
1180  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1181                   clean up chassis intrusion prints
1182  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1183                          fix Via686a and it87 detection;
1184                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1185                          fix uninitialized values; it87 beats lm78
11872.6.2 (20011118)
1188  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1189  Chip Modules (all): malloc.h -> slab.h
1190  Modules (all): Add MODULE_LICENSE("GPL")
1191  File doc/FAQ: More updates and additions
1192  File Fix it87 in5,in6 (-12,-5) calculations
1193  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1194           update it87 alarm ID's.
1195  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1196  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1197  Module i2c-amd756: Improve busy handling/printk's
1198  Module i2c-i801: Add 82801CA/CAM support
1199  Module i2c-keywest: Sync with PPC people, it works now
1200  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1201  Module i2c-viapro: Add Via VT8233 support
1202  Module it87: Merge alarm_* /proc entries to alarms
1203  Module sis5595: Fix support for rev B0
1204  Module via686a: Make limit initializations reliable
1205  Module w83781d: Allow init=0 parameter to bypass initialization
1206  Program isadump: Add flat address space (PCI) support
1207  Program Add support for i2c-ali1535, adm1024, ds1621,
1208                      fscpos, it87, maxilife, mtp008
1209  Program sensors: Fix w83781d temp precision
1210  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1211                          Fujitsu Poseidon and Scylla,
1212                          Intel 82443MX and 82801CA/CAM detection,
1213                          add ITE 8172G detection (driver in kernel 2.4.10)
12152.6.1 (20010830)
1216  File BUGS: Updated
1217  File doc/FAQ: More updates and additions
1218  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1219  File Fix/enhance it87 section
1220  Library: ds1621 and it87 updates
1221  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1222  Module i2c-amd756: Add AMD 766 support
1223  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1224  Module i2c-piix4: Add Serverworks CSB5 support
1225  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1226  Module adm1025: Fixed temp2 min/max writes
1227  Module ds1621: Add 12-bit precision mode
1228  Module it87: Enable all alarms, add in8 support, add sensor type selection
1229  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1230                  remove support for module
1231  Module sis5595: Recognize unsupported chips and refuse to load
1232  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1233  Program eepromer: new
1234  Program Fix dependencies on i2c-proc; disallow compilation
1235                      of sensors.c as a module in kernel
1236  Program sensors: it87 updates; adjust temp. precision for some chips
1237  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1238                          recognize unsupported SiS chips;
1239                          recognize AMD 766 and Serverworks CSB5.
12412.6.0 (20010612)
1242  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1243        If your make fails because it can't find <linux/i2c-proc.h>, you
1244        forgot this step!!!
1245  File doc/FAQ: Many, many updates and additions
1246  File doc/busses/i2c-sis5595: new
1247  File doc/busses/i2c-tsunami: new
1248  File doc/chips/it87: new
1249  File doc/chips/via686a: Claim support for 686b.
1250  File README.thinkpad: new
1251  File Adjust as99127f in5 (-12V) and temp2 calculations;
1252                        Add lm87, adm9240, ds1780, lm81 templates;
1253                        Enhance help comments in file;
1254                        Add Tyan S2510 dual-MTP008 example;
1255                        Make separate sis5595 section.
1256  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1257  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1258  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1259           Add support for maxilife-nba and amd1024;
1260           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1261  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1262  Chip Modules (all): Change from sensors_* to i2c_* globals
1263                      for new i2c-proc.[ch]
1264  Makefiles: enhance to support Alpha architecture
1265  Module adm1021: Fix lm84 and gl523sm support
1266  Module adm1024: new
1267  Module i2c-i801: Chip detection cleanup
1268  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1269  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1270  Module i2c-tsunami: New
1271  Module i2c-via: Ensure i2c bus is tristated correctly.
1272  Module it87: new driver for IT8705, IT8712, Sis950 chips
1273  Module lm78: Recognize chipid=0x20
1274  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1275  Module mtp008: Fix temp initializations;
1276                 Save BIOS pin configuration of temps and fans;
1277                 Fix sensor type reads/writes and fan min writes;
1278                 Fix spurious invalid sensor type messages
1279  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1280                  used for patched kernel now.
1281                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1282  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1283                  Allow force_addr=0xaddr
1284  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1285  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1286                  reading changes; Add messages for subclient
1287                  registration failure
1288  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1289  Program i2cset: new
1290  Program isadump: fix for Alpha arch. compiles
1291  Program Fix adm9240 typos; Add more chips to;
1292                      Remove ltc1710; Fix i2c_sis5595 typo;
1293                      Support kernel 2.4.5 makefile change;
1294                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1295  Program sens_update_rrd: new
1296  Program sensord: Add -d (debug) and -p (pid-file) options
1297  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1298                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1299                   Change mtp008 temps from max/min to limit/hyst;
1300                   Add maxilife-nba, adm1024, it87 support.
1301  Program sensors-detect: Recognize lm78 with chipid=0x20;
1302                          Recognize SMSC Victory66 South Bridge;
1303                          Add devfs /dev/i2c/x support;
1304                          Add adm1024, it87xx support; Add thinkpad warning.
1305  Program tellerstats: new
13072.5.5 (20010115)
1308  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1309        you have kernel 2.4.0-prerelease or greater.
1310  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1311  File doc/developers/proc: new
1312  File Add mtp008 entries, adm1025 entries
1313  Library: Add ds1621, mtp008 support
1314  Module adm1021: Add support for adm1021a / adm1023
1315  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1316  Module adm1025: Add support for remote temp; rename /proc entries to
1317                  in[0-5] and temp[1-2]; fix negative temp readings
1318  Module adm9240: Rename /proc entries to in[0-5]
1319  Module ddcmon: allow force and force_ddcmon parameters
1320  Module ds1621: new
1321  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1322  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1323  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1324  Module lm87: cleanup, update voltage calculations
1325  Module mtp008: new
1326  Module pcf8574: change update time to 5 seconds
1327  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1328  Module w83781d: fix beep setting via /proc
1329  Programs editticket, readticket: new
1330  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
1331  Program more fixes; now adds many more modules
1332  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1333                   add adm1025 temp2; report temp limits correctly as
1334                   min/max or limit/hysteresis; print message if no
1335                   sensors are found. Removed false errors from lm87 reads.
1336  Program sensors-detect: Add ds1621, mtp008 detection;
1337                          add ServerWorks detection
13392.5.4 (20001012)
1340  Module i2c-viapro: Add support for Via 596B (0x3051)
1341  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1342  Program fixed infinite loop
1343  Program sensors-detect: Detect Via 596B (0x3051)
13452.5.3 (20001008)
1346  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1347  File useful_addresses.html: update
1348  Library: Add lm87 support
1349  Module pcf8574: new
1350  Module i2c-ali1535: new
1351  Module i2c-ali15x3: removed force #ifdef.
1352  Module i2c-i801: support Intel 82801BA (815E chipset)
1353  Module i2c-i801: add i2c block write support, fix smbus block bugs
1354                   (requires i2c 2.5.3 package)
1355  Module i2c-i810: support Intel 82815
1356  Module lm87: new
1357  Module sensors: Fix for kernel 2.4.0-test8
1358                  (remove copy_to_user_ret and put_user_ret)
1359  Module w83781d: limit fan divisors to 8 max. for as99127f
1360  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1361  Program i2cdump: Add smbus block read support
1362  Programs i2cdetect, i2cdump: Improve error reporting
1363  Program sensors: new switch -u (--unknown)
1364  Program sensors-detect: detect Intel 82801BA (815E chipset)
1365  Program sensors-detect: detect Intel 82815
1366  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1367  Program sensors-detect: detect National LM87
1368  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1369  Program sensors-detect: Improve error reporting
13712.5.2 (20000709)
1372  File Fix lm80 in8 calculation
1373  Module w83781d: W83783S no longer crashes on unloading
1374  Program sensors-detect: more robustness in case of unknown i2c adapters
1375  Program sensors-detect, libsensors: fix eeprom size reporting
1376  Program sensord: more flexibility, support for alarm scanning etc.
1377  Program sensors: support for ignore setting on sensor alarms.
1378  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
13802.5.1 (20000618)
1381  Library: Add adm1025 support
1382  Module adm1025: new
1383  Module ddcmon: Fixed bus scan which could hang SMBus
1384  Module i2c-keywest: new
1385  Module maxilife: Add support for Maxilife '99 (NBA)
1386  Module via686a: Enable sensors if not enabled by BIOS
1387  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1388  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1389  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1390  Module w83781d: Fis as99127f fan speed (was 66% too high)
1391  Module w83781d: Improve beep input checking
1392  Program i2cdump: Add Winbond-style bank selection
1393  Program isadump: Add Winbond-style bank selection
1394  Program sensors: Add adm1025 support.
1395  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1396  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1397  File Add Maxilife '99 entries
1398  File Remove some as99127f entries.
1399    Note: For as99127f, reinstall manually (make install
1400          won't reinstall it) or else 'sensors -s' will fail.
14022.5.0 (20000312)
1403  Dropped all kernel 2.0 and 2.1 compatibility
1404  Module i2c-i810: new
1405  Module ddcmon: new
1406  Module via686a: new
1407  Module i2c-amd756: fixed region request
1408  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1409  Module w83781d: Don't change pin settings at initialization;
1410                  also fix chip detection.
1411  Library: Support for ddcmon and via686a
1412  Program sensors-detect: Support for ddcmon and via686a
1413  Program sensors: Support for eeprom, ddcmon and via686a
14152.4.5 (20000116)
1416  Introduced DESTDIR installation prefix
1417  Module lm80: fixes, temperature now read and set correctly
1418  Module i2c-voodoo3: driver enhancements
1419  Module w83781d: fixes, AS99127 works much better now
1420  Library: New ignore keyword in config file
1421  Programs: Support for new ignore keyword
1422  Program sensors-detect: Support for MGA detections
14242.4.4 (19991201)
1425  Addition of the alpha release of AMD 756 SMBus host support.
1426  Many fixes and updates to the gl518sm driver
1427  Updates and fixes for device detection
14292.4.0 (19990920)
1430  Too much to list.
1431  i2c and smbus parts are split off to a separate i2c package.
1432  New drivers and other stuff.
14342.3.4 (19990616)
1435  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1436  All: Now compiles against kernel 2.0.x (again ;)
1437  Module gl518sm: some updates and refinements
14392.3.3 (19990603)
1440  All: Now compiles against kernel 2.3.x (x >= 1)
1441  Module i2c-voodoo3: Timing issue fixes
1442  Module bt869: Seems to be functional and relatively well tested
1443  Many modules were modified to be more compatible with the new
1444   Mutex structure in the new experimental kernels.
14462.3.2 (19990507)
1447  Module i2c-hydra: Now compiles on 2.0.x kernels
1448  Module i2c-lm75: Slightly better detection
1449  * New, but not compiled by default:
1450  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1451  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
14532.3.1 (19990501)
1454  All: Now compiles on PPC
1455  Module i2c-hydra: NEW
1456  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1457  Module w83781d: Removed deadlock (mutex was not initialized)
1458  Documentation: A few glitches removed
1459  Makefile: default module installation directory is now
1460            /lib/modules/current/extra/misc
1461  Program sensors-detect: PPC Hydra now detected
1462  Program sensors: Now prints complete GL518SM information
1463  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
14652.3.0 (19990422)
1466  All: Many, many changes and improvements
1467  All: Many small bugs and problems removed
1468  Modules: New insmod parameters
1469  Modules: Much improved chip detection
1470  Module maxilife: NEW
1471  Module adm1021: MAX1617A now also supported
1472  Module adm9240: DS1780 now also supported
1473  Module w83781d: W83782D and W83783S now also supported
1474  Program sensors-detect: NEW
1475  Library: All chips now supported
1476  Documentation: Very much improved
14782.2.2 (199903??)
1479  Just some minor updates and bug fixes.
14812.2.1 (19990218)
1482  All: Removed compile warnings
1483  Module i2c-dev: Small bug removed if DEBUG=1 was used
1484  Module sis5595: Now compiles for 2.0 kernels
1485  Module adm1021: Detection corrected
14872.2.0 (19990216)
1488  All: Set copyrights to include 1999
1489  All: Small bugfixes
1490  I2C: Upgraded to newest archive of Simon Vogl
1491  Module i2c-dev: NEW
1492  Module i2c-ali15x3: NEW
1493  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1494     directories, and somewhat improved
1495  Module sis5595: NEW
1496  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1497  Library: Support for new chip drivers, several small bugs fixed
1498  Library manual pages: NEW
1499  Program i2cdetect: Moved to detect directory
1500  Program NEW
1501  Program doc-features: NEW
1502  Program sensors: Added man-page
1503  Document BUGS: Added cdrom bug and kernel i2c conflict
15052.1.2 (19990116)
1506  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1507  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1508  Documentation in doc/kernel: NEW
15102.1.1 (19990107)
1511  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1512                     and older
1513  Module gl518sm.o: Miscelaneous bugs and problems solved
1514  Program isadump: NEW
15162.1.0 (19981230)
1517  Library: Completely NEW
1518  Program sensors: NEW
1519  Program grab_busses: NEW
1520  Program decode-dimms: More information
1521  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1522  Module w83781d.o: NEW
1523  Module lm80.o: NEW
1524  Module gl518sm.o: new procfile beep, several small updates
1525  Modules: Now use pin readings, no more scaling within the kernel (use the
1526           library instead)
15282.0.2 (19981214)
1529  Module eeprom.o: NEW
1530  Program decode-dimms: NEW
1531  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1532           2.1.58
1533  Modules: Somewhat less verbose on transfers
1534  Module lm78.o now recognizes and handles lm78-j and lm79
15362.0.1 (1998121?)
1537  Module gl518sm.o updates, to make it actually work
1538  Module lm75.o high/low-byte swapping write bug fixed
15402.0.0 (19981209)
1541  Initial release
Note: See TracBrowser for help on using the browser.