root/lm-sensors/trunk/CHANGES @ 4408

Revision 4408, 79.7 KB (checked in by khali, 8 years ago)

sensors-detect: Add support for the ATI SB700 SMBus controller.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
5  File Add a dme1737 section
6  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
7  Library: Clean up pwm symbol names translation
8           Add dme1737 support
9           Add applesmc support
10  Man page sensors.conf.5: Update the chip statement section
11  Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
12  Program isadump: Detect when address bit 7 is a busy flag
13                   Fix Super-I/O exit sequence for Winbond/Fintek chips
14  Program pwmconfig: Use smaller steps for low PWM values
15  Program rrd: Support non-i2c devices (hwmon class)
16               Add missing shell declarations
17               Update URI
18  Program sensors: Drop ddcmon and eeprom support
19                   Add dme1737 support
20                   Add applesmc support
21  Program sensors-detect: Stop Super-I/O probe after first family success
22                          Fix SMSC DME1737 detection
23                          Add /usr/sbin to the PATH (#2199)
24                          Add ATI SB700 detection
272.10.3 (20070319)
28  Library: Do not skip i2c adapters with only a class device and no
29            physical device. This change is required to survive the
30            planned struct class_dev removal from future 2.6 kernels.
31           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
32           Recognize i2c-isa-based devices as such even after class_dev
33            is gone
34           Compile with -D_REENTRANT
35           Fix support of Linux 2.6's max6650 driver
36           Fix max1619 support
37  Man page i2cdetect.8: Scanning range can be restricted
38  Module bmcsensors: Fix debugging messages
39  Module i2c-ali1563: Improve the status messages (2.6 backport)
40                      Fix device initialization (2.6 backport)
41  Module i2c-amd8111: Cleanups (2.6 backport)
42                      Fix initialization race (2.6 backport)
43  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
44  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
45  Module i2c-viapro: Add CX700 support (2.6 backport)
46  Module smsc47m1: Add SMSC LPC47M292 support
47                   Get rid of a useless semaphore (2.6 backport)
48  Programs i2cdetect, i2cdump, isadump: Flush output in real time
49  Program i2cdump: Cleaner output in SMBus block read mode
50  Program Fix pwmN_enable access (#2190)
51  Program sensors: Add smsc47m2 support (fans)
52                   Fix -A option (hide adapter name) on error
53  Program sensors-detect: Only probe relevant I2C addresses
54                          Drop ARP-capable device detection
55                          Add Maxim MAX6655/MAX6656 detection
56                           (Olexiy Avramchenko)
57                          Add Maxim MAX1668, MAX1805, MAX1989 detection
58                          Add VIA CX700 detection
59                          Drop legacy W83627HF ISA detection
60                          Don't bufferize stdout during probes
61                          Speed up the LM75 and LM77 detection
62                          Clean up the EEPROM detection
63                          Add Dallas DS75 detection
64                          Add SMSC LPC47M292 detection
65                          Add nVidia MCP61 and MCP65 detection
66                          Fix ADM1028 detection
67                          Add Nat. Semi. PC8347L Super-I/O detection
68                          Add SMSC SCH5504 Super-I/O detection (no sensors)
69                          Make the LM78 and W83781D detection safer
722.10.2 (20070115)
73  RPM: Obsolete, removed
74  File doc/fan-divisors: Update
75  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
76  Library: Add support for the pc87247 driver (fans only)
77           Probe for busses before chips
78           Drop support for algorithm names
79           Add support for coretemp driver   
80           Major update/optimization of config-file scanner
81           Add config-file scanner regression tests
82           Add f71872f support
83           Add w83627dhg support (David Holl, #2157)
84           Get the i2c adapter names from
85           Add adm1029 support (Corentin Labbe)
86  Man page i2cdetect.8: Describe the output convention
87  Man page sensors.1: Update (option -c) and clean up
88  Module bmcsensors: Fix several warnings
89                     Fix fragile structure initialization
90  Module i2c-i801: Add ICH9 support
91  Module p4b_smbus: Add support for the ICH5
92  Module f71805f: Fix the device address decoding (2.6 backport)
93  Module icspll: Delete. It was useless and dangerous.
94  Program Remove spaces at end of lines
95  Program eepromer: Fix loads of warnings
96  Program i2cdetect: Make the output clearer
97  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
98  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
99                            without need of recompilation.
100  Programs dump/*: More robust handling of user inputs
101  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
102                                  Add support for non-i2c drivers
103  Program Disable debugging by default
104                         Add support for non-i2c drivers
105                         More tolerant config file parsing
106  Program sensord: Add pc87247 support (fans only)
107                   Add vt1211 support (#2150)
108                   Add w83627dhg support (David Holl, #2157)
109                   Add w83627ehf voltage support (Dave Platt)
110                   Add k8temp support (Dave Platt)
111  Program sensors: Add pc87247 support (fans only)
112                   Hide error on missing f71805f fan
113                   Handle option -c more efficiently
114                   Drop option -a (show algorithm names)
115                   Add f71872f support
116                   Add w83627dhg support (David Holl, #2157)
117                   Add adm1029 support (Corentin Labbe)
118                   Hide error on missing w83793 temp (Gong Jun)
119  Program sensors-detect: Add SMSC DME1737 detection
120                          Add Fintek F71882FG and EPoX EP1308 detection
121                          Add Intel Core thermal sensor detection
122                          Preallocate memory for I2C_FUNCS ioctl (#2138)
123                          Prevent misdetection of MAX6633/MAX6634/MAX6635
124                          Add Intel ICH9 detection
125                          Add Maxim MAX6648/MAX6692 detection
126                          Improve ADM1029 detection
127                          Add Andigilog chips detection
128                          Add Intel AMB FB-DIMM thermal sensor detection
129                          Add ATI SB600 detection
1322.10.1 (20060924)
133  File doc/developers/checklist renamed to dev/developers/release_checklist
134          with clarifications and updates for new SVN server.
135  File README.package: Delete.
136  File doc/busses/i2c-piix4: Update (2.6 backport)
137  File doc/developers/sysfs-interface: Update
138  File etc/ Add an smsc47m192 section
139                            Comment out all set statements
140                            Add an it8716 section
141                            Add a w83793 section
142                            Adjust the vt1211 section to match the new driver
143                             interface
144  Library: Fix device scan when no i2c support is present
145           Add support for W83627EHF voltage inputs and alarms
146           Add support for the smsc47m192 driver
147           Fix all memory leaks (yeah!)
148           Fix no sensors being reported as an error
149           Add support for the IT8716F and IT8718F chips
150           Add support for the W83793 chip (Yuan Mu)
151           Map the 2.6 adm1026's fan8 to fan0
152           Missing sysfs busses and classes are not errors
153           Change vt1211 temp3-7 magnitude from 1 to 3
154  Makefile: Don't grep autoconf.h on user-space targets
155            Fix depmod on non-running kernel version
156            Remove empty include directories on make user_uninstall
157  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
158  Module i2c-amd756-s4882: Improve static semaphore initialization
159                           (2.6 backport)
160  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
161                   Add ICH8 support (2.6 backport)
162                   Fix block transaction poll loops (2.6 backport)
163                   Remove PCI function check (2.6 backport)
164                   Cleanups (2.6 backport)
165  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
166  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
167                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
168                    Drop the fix_hstcfg parameter (2.6 backport)
169  Module i2c-viapro: Fix compilation with kernels < 2.4.21
170                     Add VT8237A and VT8251
171  Module lm83: Add LM82 support (2.6 backport)
172  Module vt1211: The VT1211 has no in6
173                 Rework the voltage and temperature conversions and the
174                  temperature input order to match the Linux 2.6 driver
175  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
176                  Add specific alarm and beep defines for the W83791D
177  Module w83792d: Fix PWM range (2.6 backport)
178  Program Decode depending on the memory type
179                           Decode the manufacturing date to an ISO8601 date
180                           Add the memory size computation and provide brief
181                            timing characteritics for SDRAM/DDR/DDR2 memory
182                           Add memory size computation for Rambus memory
183                           Various output cleanups and fixes
184  Program Add /usr/sbin or /usr/local/sbin to $PATH if needed
185  Program Detect and skip false positives
186  Program i2cdetect: Add a mode to print adapter functionalities
187  Program i2cdump: Restore bank after bank switching
188                   Add new mode W (read word on even register addresses)
189  Program mkpatch: Fix typo breaking f71805f
190                   Turn warnings on (-w), and fix them
191                   Print a usage message on missing command line parameters
192  Program pwmconfig: Use mktemp instead of tempfile
193  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
194                   Add smsc47m192 support
195                   Add abituguru support (Hans de Goede)
196                   Fix memory leak when printing an unknown chip
197                   Add it8716 and it8718 support
198                   Make each it87 fan and fan div optional
199                   Print missing w83791d values
200                   Add w83793 support (Yuan Mu)
201                   The adt7463 may not have in4 (#2119)
202                   Hide more vt1211 missing input errors
203                   Clearer error messages when no sensors found
204  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
205                          Add ATI IXP200/300/400 SMBus detection
206                          Prevent warning on 64-bit PCI addresses
207                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
208                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
209                           F75384S/M, F75387SG/RG and F81218D detection
210                          Add Winbond W83793R/G and W83627DHG detection
211                          Handle the W83791D driver difference between kernels
212                          Add nForce4 MCP04, MCP51 and MCP55 detection
213                          Add AMD Geode devices detection
214                          Add ITE IT8716F and IT8718F detection
215                          Add NatSemi/Winbond PC87427 detection
216                          Get driver information for busy addresses from
217                           sysfs (2.6 only)
218                          Drop the ISA IT87xxF detection
219                          Check i2c adapter functionalities before probing
220                          Add Intel ICH8 SMBus detection
221                          Add AMD K8 thermal sensors detection
222                          Simplify detection of SiS5595, VIA686 and VT8231
223                          Add Analog Devices ADM1033, ADM1034, ADT7462,
224                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
225                          Check for root user at startup
226                          Attempt to be slightly more user-friendly
227                          Add VT8237A and VT8251
228                          Remove detection of nVidia graphics adapters
229                          Use sysfs for PCI device enumeration
230                          Add generic PCI SMBus adapter detection
231                          Add generic Super-I/O logical device detection
232                          Add SMSC LPC47M172/182 detection
2352.10.0 (20060214)
236  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
237  File doc/busses/i2c-viapro: Update (2.6 backport)
238  File doc/chips/via686a: Update (2.6 backport)
239  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
240  File etc/ Do not set vrm by default
241  File i2c-dev.h: Fix union i2c_smbus_data definition
242                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
243                  Add missing parentheses around macros
244                  Drop I2C_FUNC_SMBUS_EMUL
245                  Drop I2C_FUNC_SMBUS_*_PEC
246                  Drop I2C_SMBUS_*_PEC
247  File sensors_vid.h: Drop default VRM
248  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
249           This is intentional.  Use if you still
250           need your memory SPD data.
251  Library: Big update to use libsysfs.  More TODO though.
252           Fix bus matching code for Linux 2.6 (Karsten Petersen)
253           Add f71805f, w83687thf support
254           Add platform drivers support
255           Fix sysctl warnings on x86_64
256           Restore vt1211 temp1
257  Makefile: Compile user-space programs with -Wundef
258  Module i2c-i801: Simplify the hardware PEC code
259                   Always set PEC mode explicitly before each transaction
260  Module i2c-i810: Documentation update, PCI IDs cleanup
261  Module i2c-keywest: Remove bus probing code (2.6 backport)
262  Module i2c-nforce2: Remove dead code (2.6 backport)
263                      Add the ID of the nForce4 MCP-04 (2.6 backport)
264  Module i2c-via: Remove dead code
265  Module i2c-viapro: Remove dead code
266                     Support I2C block read (2.6 backport)
267                     Code cleanups (2.6 backport)
268                     Improve debug register dump (2.6 backport)
269  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
270          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
271          i2c-sis645: Use pci_driver name to request I/O region; do
272                      not initialize i2c_adapter name to "unset" (2.6
273                      backport)
274  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
275                                              (2.6 backport)
276  Module adm9240: Cleanups (2.6 backport)
277  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
278  Module it87: Minor cleanups
279               Fix fan3_div setting bug (Anton V. Staaf)
280  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
281               Separate the register read function
282               Add PEC support for the ADM1032
283  Module via686a: Cleanups
284  Module w83627hf: Drop useless initialization step (2.6 backport)
285                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
286                   Fix alarms (Yuan Mu)
287                   Preserve fan min on fan div change (Yuan Mu)
288                   Properly handle W83627THF without VID (Yuan Mu)
289                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
290                   Add W83687THF support
291  Module w83781d: Drop W83697HF support (Grant Coady)
292  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
293                  Fix fan control mode (PWM/DC) reporting
294                  Fix fan div auto-adjust (Yuan Mu)
295                  Fix the subclient handling
296  Module w83l785ts: Minor cleanup (2.6 backport)
297  Module vt1211: Restore temp1
298  Modules vt1211, vt8231: Change default VRM to 9.1
299  Program Add lookup tables for manufacturer names
300                           Fix rounding error in PCxxxx speed computation
301                           Improve text output
302                           Improve speed under Linux 2.6
303                           Verify checksum before decoding anything
304                           Improve manufacturing location decoding
305                           Improve memory type detection
306                           Improve part number decoding
307  Program i2cdump: Drop now useless #ifdef tests
308                   Fix capability check for continuous byte mode
309  Program i2cget: New
310  Program i2cset: Add PEC support
311                  Fix argc check
312  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
313                                       Print the correct bus type if bus
314                                       functionality can be queried
315  Program isadump: Display the real addresses in flat mode
316  Program Silently skip already existing nodes
317  Program mkpatch: Include f71805f
318  Program sensord: Do not log algorithm names
319                   Drop EEPROM support (Aurelien Jarno)
320                   Add W83627EHF, F71805F/FG support
321                   Fix PC87365/PC87366 alarms
322  Program sensors: Drop free_the_label
323                   Fix compilation with uclibc (no iconv)
324                   Add f71805f, w83687thf support
325  Program sensors-detect: Drop algorithm names
326                          Do not rely on i2cdetect -l printing algo names
327                          Simplify adapter name matching mechanism
328                          New address for ADM1032, ADT7461
329                          Improve ADT7467, ADT7468 support
330                          Fix MAX6659 reported driver
331                          Add Fintek F71805F detection
332                          Add Analog Devices ADT7476 detection
333                          Add Intel 82845G detection
334                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
335                          Fix udev detection in some corner case
336                          Improve DS1621 detection
337                          Always prefer ISA access over SMBus access
3402.9.2 (20050906)
341  File doc/chips/*: Big update (2.6 backport)
342  Library: Drop ds1780-specific code (now use adm9240)
343           Fix memory leak in sensors_get_label()
344           Support /sys/class/hwmon (Linux 2.6.14+)
345           Limit stack usage in sensors_read_proc_chips()
346  Makefile: Detect 2.6+ kernels and check targets
347  Man page isaset.8: Fix typos
348  Module adm1031: Fix broken kfree() calls
349  Module i2c-ali1563: New (2.6 backport by Winbond)
350  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
351  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
352          w83627hf.c: Tag find function __init
353  Module lm93: Fix memory leak
354  Module smsc47m1: Fix PWM enable polarity on read
355  Modules w83627hf, w83781d: Allow setting fan divisor to 128
356  Program Support Linux 2.6 (Burkart Lingner)
357                           Added DDR/DDR2 frequency reporting in convenient
358                           form of DDRxxx PCyyyy
359  Program i2cdump: Properly handle short i2c block reads
360  Program Fix compile errors
361  Program mkpatch: Include i2c-ali1563
362                   Include w83792d
363  Program pwmconfig: Fix unsafe temporary file use
364  Program rrd: Support 2.6 kernels
365  Program sensord: Add support for w83637hf
366                   Support pc87360 (Henrik Brix Andersen)
367  Program sensors: Support the VAIO "VGN" prefix for eeprom
368  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
369                          Advertise the w83792d driver
370                          Improve IT8705F and IT8712F detection
371                          Merge LM82 and LM83 detection
372                          Add W83687THF detection
3752.9.1 (20050412)
376  File doc/busses/i2c-nforce2: Update
377  File doc/chips/it87: Update
378  File doc/chips/lm90: Update for adt7461
379  File doc/chips/mic74: New
380  File etc/ New sections for lm92 and w83792d
381  Library: Add support for 2.6 fscpos driver (Stefan Ott)
382           Fix sis5595 in4 (Aurelien Jarno)
383           Add support for 2.6 gl520sm driver (Maarten Deprez)
384           Add support for 2.6 bmcsensors driver (Yani Ioannou)
385           Add support for w83792d (Chunhao Huang/Winbond)
386           Add support for 2.6 adt7461 (James Chapman)
387           Add support for 2.6 lm92
388           Add support for 2.6 vt1211
389           Add preliminary support for 2.6 w83627ehf
390  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
391            Use -fno-strict-aliasing on all architectures
392  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
393  Module bmcsensors: Fix compile error
394                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
395  Module ds1621: Fix detection (Aurelien Jarno)
396  Module eeprom: Discard SPD-centric checksum module parameter
397                 Cleanup detection function (backport from Linux 2.6)
398  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
399  Module i2c-i801: Temporarily disable broken I2C block read
400  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
401                   Gelato)
402  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
403  Module i2c-viapro: Prevent repeated resets
404  Module it87: Improve Super-I/O detection
405               Limit I2C address range
406               Support VID on the IT8712F
407  Module lm75: Only initialize CMP/INT bit
408  Module lm78: Fix bug with setting negative temperature limits
409  Module lm85: Properly differentiate between ADM1027 and ADT7463
410               Add EMC6D102 support
411  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
412               Add limited ADT7461 support
413  Module lm93: Fix IN10 (+5V) scaling
414  Module mic74: New
415  Module w83627hf: Support secondary Super-I/O address
416                   Enable temp2 and temp3 if they are disabled
417  Module w83781d: Revert AS99127F temp2 and temp3 computation change
418                  Skip final initialization step for AS99127F chips
419  Module w83792d: New (Chunhao Huang/Winbond)
420  Program ddcmon: New; user-space replacement for the ddcmon driver
421  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
422  Program isadump: Handle Super-I/O keys
423  Program lm_sensors.init: Cleanups (Axel Thimm)
424  Program Add basic command-line interface
425  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
426  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
427                     Don't complain about read-only enable files (lm85)
428                     Fix handling of alternate config file name
429  Program sensord: Fix erroneous error message (Aurelien Jarno)
430                   Support sis5595 in4 (Aurelien Jarno)
431                   Support w83627thf
432                   Support the separate it8712 prefix (Aurelien Jarno)
433  Program sensors: Display sis5595 in4 (Aurelien Jarno)
434                   No errors on missing pc87360 fans
435                   Add gl520sm support (Maarten Deprez)
436                   Improve vt1211 error/ignore handling (Michael Carland)
437                   Support w83792d, w83627ehf
438  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
439                          Improve IT8705F and IT8712F detection
440                          Improve udev detection
441                          Fix DS1621 detection
442                          Add W83627EHF detection
443                          Add ATI SMBus detection
444                          Add VT1211 alias detection
445                          Warn if chip modules not found
446                          Add i2c-ipmi to list if bmcsensors is on it
447                          Add PC87591 detection
448                          Search for correct udev db file name
449                          Add nForce3 250Gb and nForce4 detection
4522.9.0 (20041228)
453  NOTE: Requires i2c-2.9.0 or newer!
454  File README.thinkpad: Update
455  File doc/chips/it87: Cleanups
456  File doc/chips/lm63: New
457  File etc/ Set via686a voltage limits
458  File kernel/chips/ Resync module list with mkpatch
459  File kernel/include/sensors_compat.h: Define __devexit_p if missing
460                                        (kernels 2.4.16 and older)
461  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
462                             and dec_use removed in release 2.8.0
463  Modules (all chip drivers): Remove owner from i2c_driver; pass
464                              controlling_mod to i2c_register_entry() again
465  Module bmcsensors: Support function 1/x
466  Module i2c-amd756: Display the real bus name
467  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
468  Module i2c-i801: Support i2c block read (ICH5 and higher)
469                   Add PEC support for ICH6
470                   Add support for ICH7
471  Module i2c-ipmb: Remove from build since it doesn't work
472  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
473  Module icspll: Fix compilation
474  Module lm63: New driver for the National Semiconductor LM63
475  Module lm83: Use signed types for temperatures
476               Check limits on register writes
477  Module lm87: Round voltages properly
478               Retry on read errors (David Knierim)
479               Less agressive init (no reset)
480  Module lm90: Use signed types for temperatures
481               Check limits on register writes
482  Module lm93: Added module parameter for VID pin input thresholds.
483               Fix typo in dynamic VID alarms
484               Adds a couple log messages for failed transactions (David
485               Knierim)
486               Fix compilation breaking C99-ism (Axel Thimm)
487               Fix block read retries
488  Module pc87360: Support secondary Super-I/O address
489  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
490  Library: Add lm63 support
491           Add lpc47b397 support
492  Programs *.init: Rename lockfile to match file name
493  Programs i2cset, isaset: Written byte/word can be masked
494  Program Find eeproms on non-0 i2c bus too
495  Program mkpatch: Include i2c-amd756-s4882
496  Program pwmconfig: Handle new (well, back to old) pwm files names for
497                     Linux 2.6.10 and up
498  Program sensord: Do not scale load average (Aurelien Jarno)
499  Program sensors: Add lm63, lpc47b397 support
500                   Support DDR2 memory module EEPROMs (Rudolf Marek)
501                   Support only one location for the default configuration file
502                   Display the default configuration file location in --help
503                   Simplify the configuration file opening code
504  Program sensors-detect: Improve LM63 detection
505                          Discard IBM Thinkpad detection code
506                          Add PCA9556, LPC47B397, ICH7 detection
507                          Fix W83792D detection, add W83791SD detection
5102.8.8 (20041007)
511  File doc/donations: Update
512  File doc/lm_sensors-FAQ.texi: Add 4.6.1
513                                Update 4.7
514  File doc/chips/gl518sm: Update "iterate" info
515  File doc/chips/it87: Discard outdated module parameters
516  File doc/chips/lm75: LM77 is not supported
517  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
518  File doc/chips/lm93: New
519  File doc/chips/w83l785ts: Improvements
520  File etc/ Fix it87 lines order
521                            Update lm87 section
522  File kernel/include/sensors_vid.h: Support VRM 10.0
523  Library: Support 2.6 adm1025
524           Preliminary support for 2.6 lm87
525           Support 2.6 adm9240
526           Allow an alternative sysfs file name for chip features (2.6)
527           Fix lm83 critical limits (2.6)
528           Add lm93 support
529           Prevent some procfs errors from being silently ignored
530  Makefiles: Implement user_uninstall (Rudolf Marek)
531             Spoof LOGNAME and HOSTNAME when making html man pages
532  Module adm1025: Refine detection
533                  Update limit registers again (revert of 2.8.1)
534                  Init high limits if they read 0
535                  Fix conversions
536  Module lm75: Refine detection
537  Module lm78: Fix init
538  Module lm83: Default to kind lm83 if forced.
539               Fix temperature macros.
540  Module lm90: Add LM86, MAX6657 and MAX6658 support
541  Module lm93: New
542  Module mtp008: Fix the setting of limits on temp2
543  Module pca9540: Refine detection
544  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
545                  Support VID
546                  Fix fan_div file when fan count is less than 3
547                  Additional init and debug
548  Module smsc47m1: Fix pwm_enable being inverted
549  Module w83627hf: Add alternate VCORE/in0 calculation method
550                   Remove reset of chip by driver on initialization
551  Module w83781d: Fix default VRM for w83791d
552  Module w83l785ts: Implement read error handling (backport from 2.6)
553  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
554                    Wait for user input to continue (as opposed to 5 sec
555                    delay), can be skipped with -y
556                    Various cleanups and code refactoring
557                    Update manual pages
558  Program fancontrol.init: New (Dean Takemori)
559  Program Restore fans on many kinds of errors/interrupts
560  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
561                           (Giuseppe Della Bianca)
562  Program Detect devfs and refuse to run
563                    Use mknod's mode instead of chmod
564  Program mkpatch: Include xeontemp and pc87360
565  Program sensors: Rework adm1025 support
566                   Display pc87365/pc87366 VID
567                   Improve smsc47m1 support
568                   Hide 2.6 adm1027 alarm_mask being missing
569                   Print VRM version for all supported chips
570  Program sensors-detect: Support LM93, LM77, LM63
571                          Support PC8739x Super-I/O family (no sensors)
572                          Fix PCA9540 support
573                          Refine ADM1025/ADM1025A detection
574                          Refine LM75 detection
575                          Ignore missing /proc/modules (Andras Bali)
576                          Script-wide Perl cleanups
577                          Support udev
578                          Support W83792D, LM96000
5812.8.7 (20040611)
582  File README.thinkpad: Update 24RF08 status
583  File doc/fan-divisors: More info on accuracy
584  File doc/lm_sensors-FAQ.texi: Update 4.27
585  File doc/chips/adm1031: New
586  File doc/chips/max1619: New
587  File doc/chips/pc87360-fan: Renamed to pc87360
588  File doc/chips/pc87360: Big update
589  File doc/chips/w83781d: Update AS99127F documentation
590  File etc/ Add comments about BP6 voltages
591                            Add comment on Asus A7V8X-X VCore
592                            Misc fixes to lm80 section
593                            Update via686a section
594                            New lm99 section
595                            Add section for LM85-like chips
596                            Preliminary pc87366 section
597                            Add comment on GL520SM application modes
598                            Document beep_enable (Aurelien Jarno)
599                            Preliminary max1619 section
600                            Preliminary adm1030 and adm1031 sections
601  Library: Fix 2.6 VRM
602           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
603           Fully support the PC87360 family
604           Support the lm99
605           Add version and date strings
606           Support 2.6 max1619
607  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
608  Man page i2cdetect.8: document new command line flags
609  Man page i2cdump.8: More details on how i2cdump can write to a chip
610  Modules (all chip drivers): Rework memory allocation scheme.
611  Module adm1031: New (Alexandre d'Alton)
612  Module bmcsensors: Fix oops by creating thread for initialization
613  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
614  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
615          asb100.c, lm92.c: Use swab16
616  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
617  Module gl520sm: Less agressive initialization process
618                  Fix temp1 limits being unsettable in application
619                  Ensure that temp2 and in4 are not used at the same time
620  Module i2c-i801: Support 6300ESB and ICH6
621  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
622  Module i2c-sis645: Add support for SiS655
623  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
624  Module lm90: Support LM99 and LM89
625  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
626               Get rid of useless i2c_probe call
627  Module max1619: New (Alexey Fisher)
628  Module p4b_smbus: Add support for mobile versions of the 82801
629                    (Axel Thimm)
630  Module pc87360-fan: Renamed to pc87360
631  Module pc87360: Also support PC87365 and PC87366
632                  Add write support
633                  Correctly set the chip name depending on the type
634                  Add voltage and temperature support
635                  Fix fan speed computation
636                  Retrieve fans configuration from Super-I/O space
637                  Export pwm_enable (read-only)
638                  Honor pwm invert bits
639                  Clear fan alarms after we read them
640                  Do not read fan data when monitoring is disabled
641                  Do not include SENSORS_INSMOD stuff
642                  New module parameter: init
643                  Fan clock dividers change automatically
644                  Add thermistor dupport
645  Module smsc47m1: Lock on reads and writes
646                   Various PWM fixes
647  Module thmc50: Fix address range
648  Module via686a: Fix voltage roundings
649                  Simplify temperature conversions
650  Module w83781d: Drop PWM support for as99127f
651                  Invert AS99127F beep bits in driver rather than user-space
652  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
653  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
654  Program New
655  Program i2cdetect: Adapt probing method to address
656                     Add -q and -r flags to force probing methods
657                     Allow probing range selection
658  Program isadump: Major improvements
659  Program isaset: New
660  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
661                   module
662                   Include i2c-nforce2
663  Program sensord: New --rrd-no-average parameter
664                   Syncronize time slots with rrd
665                   Fix W83781D temp3 alarm (Aurelien Jarno)
666                   Add ASB100 support (Andrew May)
667  Program sensors: Fully support the PC87360 family
668                   Fix lm80 temperature alarms
669                   Support the lm99
670                   Do not invert AS99127F beep bits anymore
671                   Fix W83781D temp3 alarm (Aurelien Jarno)
672                   Print library version string
673  Program sensors-detect: Rework Super I/O detection
674                          Support SiS655/SiS96x
675                          Support ADT7461 and ADT7467
676                          Better support for ADM1027, ADT7460 and ADT7463
677                          Explicitly support ADM1028
678                          Scan all logical devices of PC87365 and PC87366
679                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
680                          Detect eeproms with software write protect (not
681                          enabled by default)
682                          Support ALi 1563 (2.6 only)
683                          Drop LTC1710 support
684                          Use byte reads for probing on ranges 0x30-0x37 and
685                          0x50-0x5F
686                          Improve LM89 and LM99 support
687                          Support GeForce FX 5900 video cards
688                          Fix devfs misdetection (Aurelien Jarno)
689                          Detect 6300ESB, ICH6
690                          Fix double detection of ISA chips
691                          Support MAX1619
692                          Support PC87373 Super-I/O
693                          Fix unknown adapters appearing multiple times
694                          Refine MAX6650/MAX6651 detection
6972.8.6 (20040405)
698  File README.thinkpad: Update status
699  File doc/chips/pca9540: New
700  File doc/chips/pc87360-fan: New
701  File etc/ Update pcf8591 default configuration
702  Library: Switch to new sysfs naming standard
703           Fix gcc 3.3 warnings (Philipp Thomas)
704           Support 2.6 ds1621 and pcf8591
705           Change pcf8591 magnitudes
706           Support pc87360-fan
707  Makefile: Install shared library 755
708  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
709  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
710  Modules ds1621, pcf8591: Check for capabilities before using them
711                           (Aurelien Jarno)
712  Modules pcf8574, pcf8591: Cleanups
713  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
714  Module adm1021: Better detection and initialization
715  Module pca9540: New driver for the Philips PCA9540
716  Module pc87360-fan: New driver for the National Semiconductor PC87360,
717                      PC87363 and PC87364 Super I/O chips
718  Module smsc47m1: Support the LPC47B27x
719  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
720  Program i2cdetect: Skip special addresses by default
721  Program sensord: Prevent null pointer dereference (Tim Toohey)
722  Program sensors: Print the degree symbol in the terminal's current locale
723                   (Aurelien Jarno)
724                   Update pcf8591 print to support 2.6 driver
725                   Support pc87360-fan
726  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
727                          Improved SiS chips support
728                          Add a white list of IBM systems
729                          Drop support of undetectable adapters
730                          Fix smart battery detection
731                          Add smart battery charger and manager detection
732                          Rework adm1021 and clones detection
733                          The PC87360, PC87363 and PC87364 Super I/O chips
734                          now have a (preliminary) driver
735                          Rework Super I/O detection
736                          Better support of devfs
737  Program New
7402.8.5 (20040305)
741  File doc/chips/SUMMARY: Update
742  File etc/ Epox 8K3A tweaks. (Kronos)
743  Makefiles hotplug and rrd: Remove -o and -g arguments to install
744  Module bmcsensors: Increase max SDRs to 100
745  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
746  Module i2c-amd756: Don't register driver to avoid driver conflicts.
747                     (Daniel Rune Jensen)
748  Module it87: Better temperature sensor types handling (Takeru Komoriya)
749               Fix reset=1 (Takeru Komoriya)
750  Module lm80: Code cleanups
751  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
752  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
753  Module w83627hf: Add w83637hf support
754                   Fix exported name
755                   Fix PWM in w83627thf
756                   Preserve other bits when forcing temp2/3 to comparator mode
757  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
758                  Remove asb100 support
759  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
760          Define driver ID if i2c-id.h doesn't have it yet.
761  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
762          Backport oops fix from Linux 2.6.
763  Modules (all chips): Get rid of useless headers
764  Program Add sysfs support
765  Program sensors: Add w83637hf support
766                   Add support for Shuttle Ethernet EEPROMs
767                   Drop 2.6 subclient detection
768  Program sensors-detect: Add heuristics to the LM80 detection function
769                          Add support for W83L785R, improve W83L784R/AR
770                          Add GeForce FX 5600 as supported by rivatv
771                          More Super IO chips, better handling
772  Library: Update to match renames in fscher
773           Reverse temporary changes to w83l785ts mappings
774           Fix vt1211 and vt8231 uch_config not being writable
775           Add 2.6 lm80 support
776           Add w83637hf support
777           Remove in6 and temp1 from vt1211 and vt8231
778           Add support for Shuttle Ethernet EEPROMs
779           Remove unused as99127f features
7822.8.4 (20040207)
783  File doc/lm_sensors-FAQ.texi: Update 4.20.
784  File doc/chips/it87: Change hyst to low
785  File doc/chips/w83l785ts: New
786  File etc/ Change it87 hyst to low
787                            Fix w83697hf supposed to have temp3
788                            Limits initialization for adm1025/ne1619
789                            Handle fscher voltage conversions
790                            Add Tyan Trinity S2495 KT400 setup (Eric
791                              Schumann)
792                            Fix fscher fan labels (Reinhard Nissl)
793  Library: Better 2.6 eeprom support
794           Change it87 hyst to low
795           Add 2.6 gl518sm, fscher support
796           Fix 2.6 negative voltages handling
797           Temporary fix to w83l785ts mappings
798  Module adm1025: Separate prefix for NE1619
799  Module adm1026: Remove use of temporary ID
800                  Define addresses as a range
801  Module bmcsensors: Fix reservations
802  Module fscher: Externalize voltage conversions
803  Module eeprom: Remove memtype
804  Module i2c-piix4: Fix resource release error
805                    Various cleanups
806  Program Add sysfs support
807  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
808                   Drop linux 2.2 support
809                   Add w83627hf
810  Program sensors: Do not show algorithm by default
811                   Cleanup temperature unit display code
812                   Cleanup label spacing code
813                   Fix output to UTF-8 terms (Marcel Sebek)
814                   Simplify gl518sm print
815                   Do not ignore errors in FSC chips prints
816                   Fix w83l785ts print
817                   Cleanup FSC chips prints
818  Program sensors-detect: Fix PATH issues
819                          Correctly point to the fscher driver
8222.8.3 (20040115)
823  File lm_sensors.spec: Update
824  Library: Add 2.6 eeprom, lm90 support
825           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
826  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
827  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
828  Module i2c-amd756: Fix byte writes
829  Module i2c-tsunami: Cleanups (Daniel Nilsson)
830  Module it87: Fix sg_tlx writes; fix sensor type reporting;
831               add 8712 Super I/O detection;
832               remove initialization of temp_type and fan_ctl;
833               remove init and temp_type module parameters
834  Module lm90: Handle hysteresis differently
835  Module smartbatt: Fix detection, magnitudes, temp
836  Module w83781d: Fix negative voltages
837  Module w83l785ts: New
838  Program eeprog: Make 8 bit mode the default
839  Program fancontrol: Improvements, fixes, support 2.6 kernels
840  Program mkpatch: Add lm75.h
841  Program pwmconfig: Improvements, fixes, support 2.6 kernels
842  Program sensors: Add ASB100 support
843  Program sensors-detect: Add 8712 Super I/O detection;
844                          add W83L785TS detection
8472.8.2 (20031211)
848  IMPORTANT: Limit initialization removed from all chip drivers!
849             If you didn't run 'sensors -s' in the past you may need to now!
850  File Change lm75 scaling back to 1;
851                        Add example for asb100
852  Library: Fix bmcsensors scaling, increase number of sensors;
853           Add w83627thf support; Advance version to 3.0.0;
854           Add hermes, ADM1032, ASB100 support;
855           Add it87 sensor type support;
856           Add sysfs support for kernel 2.6;
857           Fix memory leaks
858  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
859             Fail if no kernel .config file exists;
860             Don't build module dependencies for user and user_install
861  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
862          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
863          smsc47m1, thmc50, via686a, w83627hf, w83781d:
864          Remove initialization of limits by driver.
865  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
866  Modules (chip): Init cleanups
867  Module asb100: New
868  Module bmcsensors: Fix voltage scaling, voltage and fan limits
869  Modules ddcmon, eeprom: Add failure printks
870  Module fscher: New (Fujitsu-Siemens Hermes driver)
871  Module i2c-amd756: Fix AMD8111 support
872  Module i2c-amd8111: Fix byte writes
873  Module i2c-nforce2: Fix byte writes
874  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
875  Module i2c-sis630: Sync with 2.6.0-X driver version
876  Module i2c-viapro: Add support for Via 8237
877  Module it87: Add pwm and "smart guardian" support;
878               add it87 sensor type support
879  Module lm75: Fix negative voltages
880  Module lm90: Add ADM1032 support
881  Module w83781d: Fix 791d and 627hf detection
882  Module w83627hf: Add VID support
883  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
884  Program eeprog: New
885  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
886                                       support sysfs for i2c bus search
887  Program i2cdetect: Add -l option to list busses
888  Program i2cdump: Add 'c' mode for consective address reads
889  Program mkpatch: Cleanups
890  Program pwmconfig: Handle multiple fans controlled by a single pwm
891  Program sensord: Remove ddcmon support
892  Program sensors: Add ADM1032 support; add messages for sysfs
893  Program sensors-detect: Prefer Super I/O drivers;
894                          Fix W83627HF and W83791D detection; detect CSB6;
895                          Detect ADM1029, ADM1030, ADM1031;
896                          Detect W83637HF, W83697UF;
897                          Add it87 sensor type support; add sysfs support
898                          Reduce lm80 misdetects; remove PCFxxxx "detection"
899                          Detect VT8237 (KT600)
900                          Use VPD instead of DMI+ACPI for Thinkpad detection
901                          Suggest new asb100 driver instead of w83781d
9042.8.1 (20031005)
905  NOTE: Requires i2c-2.8.1 or newer!
906  File Improved adm1025 section
907                        Default temp labels for as99127f
908                        Improved lm83 section
909                        Better support for Asus A7V8X-X
910  File doc/chips/SUMMARY: Add SMSC manufacturer ID
911  File doc/chips/adm1025: Add decent documentation (almost new)
912  File doc/chips/lm83: Known motherboards list update, misc updates
913  Library: Change adm1025 names (hyst/over become low/high)
914           Swap adm1025 temp1 and temp2 to match the driver's order
915           Advance version to 2.0.1
916           Update lm83 support
917           Add support for lm90, xeontemp, max6650
918           Add separate messages for read and write errors
919           Add missing message for parse error
921  Modules (various): Fix includes for compilation on Alpha
922                     Use the new i2c_delay function instead of the various
923                     do_pause functions
924  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
925  Module i2c-nforce2: Cleanups
926  Module i2c-i810: Use readl/writel for portable access to PCI memory
927  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
928  Module i2c-savage4: Use readl/writel for portable access to PCI memory
929  Module i2c-sis630: Fix detection
930                     Add block data read/write support
931  Module i2c-sis645: Detection method change/bugfix
932  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
933  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
934  Module adm1025: Major driver update
935                  Add support for Philips NE1619
936                  Simplify the driver a lot (unified voltages, unified
937                  temperatures and much more)
938                  Fix default voltage limits
939                  Change default temperature limits
940                  Swap remote and local temperatures to match the internal
941                  registers order (make the code unification possible)
942                  Export remote diode fault through alarms
943  Module ddcmon: Major update
944                 Add half a dozen new features
945                 Add checksum parameter (same as for the eeprom module)
946                 Fix monitor limits
947  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
948  Module lm78: Fix a fan_div/fan_min bug
949  Module lm83: Add t_crit and alarms support
950  Module lm90: New
951  Module max6650: New
952  Module saa1064: New
953  Module smsc47m1: Add support for 47M142
954  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
955                   enhance w83627thf support
956  Module w83781d: Enhance chip detection; clean up error returns;
957                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
958  Module xeontemp: New
959  Program Add Direct Rambus (DRDRAM)
960                           Mark Rambus as unsupported
961  Program New
962                          Interfaces between our eeprom module and
963                          parse-edid from the read-edid project
964  Program p4b_smbus: Fix SMP compilation
965  Program sensord: Add support for IT87 (Mike Black)
966                   Change ADM1025 support to match the changes made to
967                   the library
968  Program sensors: Rewrite and enhance EEPROM support
969                   Change LM83 and ADM1025 support to match the changes
970                   made to the library
971                   Add DRDRAM support to print_eeprom
972                   Exit(1) on /proc write failure (Malte Starostik)
973                   Add LM90, MAX6650 support
974  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
975                          Add support for LM82, LM86, LM89
976                          Improved W83781D family detection
977                          Add support for AS19927F rev.2, ASB100 Bach
978                          Add support for Asus Mozart-2 (3 types)
979                          Add support for NE1619
980                          Add support for FSC Hermes
981                          Make sure /sbin is in the user's path
982                          Fix EEPROM detection
983                          Automatic module.conf and /dev/i2c* detection
984                          Improve LM82 and LM83 detection
985                          Handle "to-be-written" cleanly
986                          Add detection for 47M14x Super I/O
987                          Handle the one-address-many-chips-same-driver
988                          case
9912.8.0 (20030714)
992  NOTE: Requires i2c-2.8.0 or newer!!!
993  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
994                  2.4.13 or later required for mkpatch.
995  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
996                  i2c package
997  File doc/chips/fscscy: Add watchdog documentation
998  File Fix vt1211/vt8231 thermistor calculations
999  File sensors.h: Now automatically generated
1000  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1001           add adm1026, lm83, lm85, w83791d support;
1002           Advance version to 2.0.0
1003  Makefiles: Generate warnings if new library won't be found by;
1004             Modules now install in kernel/drivers/i2c/[busses,chips];
1005             Ensure that headers in /usr/local/include are used first;
1006             Don't use /usr/include headers for modules;
1007             Handle multiple UTS_RELEASE definitions in linux/version.h;
1008             Automatically generate kernel/include/sensors.h;
1009             Remove old gzipped modules; remove old misc directory if empty;
1010             Remove pre-2.4 installation method;
1011             -Wall now the default;
1012             Add new targets user, user_install, and help;
1013             Run depmod after module installation
1014  Modules (all): Cleanups including
1015                - Add #include <i2c-proc.h>
1016                - C99 initializers
1017                - Remove #ifdef MODULE
1018                - Remove #ifndef THIS_MODULE
1019                - Remove #ifndef MODULE_LICENSE
1020                - Remove other 2.1/2.2 #ifdefs
1021                - Remove #include "sensors.h", copy SYSCTL defs to module
1022                - Remove excess #includes
1023                - Remove argument in i2c_register_entry()
1024                - Remove dummy xxx_command() definition
1025                - Remove EXPORT_NO_SYMBOLS
1026                - Remove init_MUTEX #define
1027                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1028                  no longer adjust their own refcounts
1029                - Use module_init() and module_exit()
1030                - Update to new i2c_driver struct definition
1031  Modules (bus PCI): Convert to PCI-module-style initialization
1032  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1033  Module adm1021: Set alarm on failed reads and report old value;
1034                  merge changes from kernel 2.5.54
1035  Module adm1026: New
1036  Module bmcsensors: Fix compile when DEBUG=1
1037  Modules ddcmon, eeprom: Use i2c block reads if possible;
1038                          better error handling
1039  Module ds1307: Add to Makefile
1040  Module gl520sm: Fix temperature over/hyst writes
1041  Module lm75: merge changes from kernel 2.5.54
1042  Module lm83: New
1043  Module lm85: New
1044  Module i2c-ali1535: Check for invalid transaction
1045  Module i2c-ali15x3: Check for invalid transaction
1046  Module i2c-amd756: merge changes from kernel 2.5.54;
1047                     check for invalid transaction
1048  Module i2c-amd8111: merge changes from kernel 2.5.54
1049  Module i2c-i801: Add support for 82801EB (ICH5)
1050  Module i2c-i810: Fix for some chips
1051  Module i2c-nforce2: New
1052  Module i2c-piix4: Check for invalid transaction
1053  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1054  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1055        north bridges; SiS962 and SiS963 south bridges
1056  Module i2c-viapro: Check for invalid transaction
1057  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1058          pwm and pwm enable support; update docs
1059  Module smbus-arp: Check adapter for HW or SW PEC support;
1060                    add reset option
1061  Module w83781d: Add support for w83791d
1062  Module w83627hf: New
1063  Program Recognize DDR and Rambus
1064  Program eeprom: Fix writes for small eeproms
1065  Program eeprom, eepromer: Use local i2c-dev.h for build
1066  Program fancontrol: New
1067  Program lm_sensors.init: Call sensors -s in start()
1068  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1069                   Add adm1026,lm85 support;
1070                   Remove sensors.c file; add sensors_compat.h;
1071                   Remove patches to i2c-core.c and drivers/char/mem.c;
1072                   Now works only for kernels 2.4.13 or later
1073  Program p4b_smbus: Fix 'make install';
1074                     Install in same place as other modules;
1075                     Clear correct bits in config word
1076  Program pwmconfig: New
1077  Program sensors: add adm1026, lm85, w83791d support
1078  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1079                          w83627hf, w83627thf, w83697hf);
1080                          Add support for SiS651, SiS961, SiS745, SiS746;
1081                          Support dmidecode 2.0 and later;
1082                          Fix "C" format error;
1083                          Add support for adm1026, 82801EB (ICH5), W83791D;
1084                          Add support for w83l785ts, nForce2;
1085                          Fix UTF-8 incompatibility;
1086                          Better support for lm75;
1087                          Add support for lm83
10892.7.0 (20021208)
1090  NOTE: Requires i2c-2.7.0 or newer.
1091  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1092  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1093  File doc/busses/i2c-sis645: Add license
1094  File doc/chips/lm92: Add license, features
1095  File doc/chips/maxilife: Add license, parameters, features
1096  File doc/chips/smartbatt: Complete rewrite
1097  File doc/chips/vt8231: Add license, parameters
1098  File Add section for lm75; complete the lm78 section
1099  Library: Add support for MC1066; add multiple VRM version support for lm87;
1100           enhance adm1023 support; initial support for Sony Vaio eeprom;
1101           add support for bmcsensors; add hacks for additional dummy drivers
1102  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1103            add flags for x86_64 compiles
1104  Module adm1021: Add support for MC1066
1105  Module bmcsensors: New
1106  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1107                   kernel 2.5.43; fix 2.2 kernel compiles
1108  Module gl518sm: Iterate allowed only for rev 0x00
1109  Module i2c-amd756: Configure base address for nForce support;
1110                     check for uninitialized base address;
1111                     add support for amd8111 (SMBus 1.0)
1112  Module i2c-amd8111: New (SMBus 2.0)
1113  Module i2c-ipmb: New
1114  Module i2c-ipmi: New
1115  Module i2c-keywest: Sync with kernel 2.4.20
1116  Module i2c-sis630: Add support for SiS730
1117  Module i2c-sis645: Improve support for SiS645/961;
1118                     add support for SiS645DX/961 and SiS735;
1119                     fix 2.2 kernel compiles
1120  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1121  Module lm87: Add multiple VRM version support
1122  Module vt1211: Fix inx limits and alarms; fix in0
1123  Module vt8231: Fix inx limits and alarms; fix in0
1124  Module w83781d: Fix in0/in1 initialization
1125  Module smartbatt: New
1126  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1127  Program Code cleanup; valid HTML; better HTML output;
1128                           stop decoding on checksum error
1129  Program dmidecode: Fix read bug; upgrade to version 1.8
1130  Program doc-insmod: Complete rewrite; fix author output
1131  Program doc-features: Complete rewrite; handle missing sysctl entries;
1132                        handle unknown prefix with suggestion
1133  Program lm_sensors.init: Remove spaces bug; add green/red output
1134  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1135  Program rrd: Add sanity limits to newly-created RRD.
1136  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1137  Program sensors: Add support for MC1066, Rambus Rimms;
1138                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1139                   initial support for Sony Vaio eeprom
1140  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1141                          IPMI, AMD8111; add help if no sensors found;
1142                          add ACPI method for IBM system detection;
1143                          work with old Perl versions again;
1144                          initial support for Sony Vaio eeprom
11462.6.5 (20020915)
1147  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1148  File Fix temp[23] for as99127f; add vt8231
1149  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1150  Module dmi_scan: new
1151  Module ds1621: Fix enable/disable
1152  Module eeprom: Do not corrupt 24RF08's when checksum=1
1153  Module i2c-i801: Check for uninitialized base address;
1154                   enable if not enabled
1155  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1156  Module i2c-sis630: new
1157  Module i2c-sis645: new
1158  Module lm92: Fix in-kernel initialization
1159  Module via686a: Remove VT8231 support
1160  Module vt8231: new
1161  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1162  Program dmidecode: new
1163  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1164  Program mkpatch: Add entries for, lm92,
1165                   pcf8574, pcf8591, smsc47m1, vt1211;
1166                   add dmi_scan
1167  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1168  Program lm_sensors.init: fix stop()
1169  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1170                   add support for logging loadavg in RRD;
1171                   fix down-converting raw labels for RRD;
1172                   update chip support, still behind sensors
1173  Program sensors: Add /usr/local/etc to config file path;
1174                   fix -c and -u flags; add vt8231
1175  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1176                          refuse to run on IBM systems;
1177                          fix sysconfig module numbering;
1178                          change quick write to not corrupt 24RF08's
11802.6.4 (20020719)
1181  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1182  File doc/vid: New
1183  File include/sensors_vid.h: New
1184  File Add vt1211, smsc47m1
1185  Library: Add multiple VRM version support for adm1025, w83781d;
1186           fix 'flex scanner jammed' on some systems;
1187           add vt1211, smsc47m1, lm92;
1188           fix access mode checking
1189  Makefiles: For 2.4+ kernels, modules now install in
1190             kernel/drivers/[i2c,sensors] , not misc/ , and
1191             'make install' removes old versions in misc/ .
1192             Use $CFLAGS and $CPPFLAGS if defined.
1193  Module adm1025: Add multiple VID version support
1194  Module ds1307: new
1195  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1196                     reliability improvements
1197  Module i2c-hydra: Flush posted writes
1198  Module i2c-i801: Add support for 82801DB (ICH4)
1199  Module i2c-i810: Flush posted writes
1200  Module i2c-savage4: new
1201  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1202  Module i2c-voodoo3: Flush posted writes
1203  Module ds1307: New
1204  Module lm92: New
1205  Module smbus-arp: new
1206  Module smsc47m1: new
1207  Module via686a: Add support for VT8231 sensors
1208  Module vt1211: new
1209  Module w83781d: Add multiple VID version support; fix temp alarms
1210  Program eeprom: new
1211  Program i2cdump: Add smbus block command specification, add PEC support
1212  Program lm_sensors.init: new
1213  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1214                   pcf8574, pcf8591, smsc47m1, vt1211
1215  Program p4b_smbus: Add support for ICH4
1216  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1217  Program sensord.init: Renamed, was prog/init/sensors
1218  Program sensord: Major update, now requires rrd source;
1219                   not compiled by default
1220  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1221                   (don't display algo. and adap.) option;
1222                   add vt1211, smsc47m1, lm92
1223  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1224                          add 82801DB, LM85; fix perl warnings;
1225                          generate /etc/sysconfig/lm_sensors for
1226                          lm_sensors.init script
12282.6.3 (20020322)
1229  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1230  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1231  File doc/chips/it87: add more temp_type help
1232  File Un-ignore it87 in8, temp3, fan3;
1233                        add adm1021 section; add lm87 AIN[1,2] template;
1234                        swap negative voltage limits for 782d,783s,627hf,
1235                        697hf,it87; add more it87 help; swap neg. voltage
1236                        limits for lm78(-j), lm79, w83781d, as99127f
1237  Library: Add PCF8591, W83697HF, ADM1023 support;
1238           fix w83* fan_min computes;
1239           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1240  Module adm1024: Add MODULE_LICENSE("GPL")
1241  Module bt869: Add s-video out and DVD resolution support
1242  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1243  Module fscscy: implement min/max for voltages and fans
1244  Module i2c-amd756: Add support for AMD768
1245  Module i2c-i810: Add support for 810E
1246  Module i2c-keywest: Big update, sync with kernel 2.4.18
1247  Module i2c-piix4: Check for uninitialized base address
1248  Module i2c-sis5595: Blacklist 645, 735
1249  Module i2c-viapro: Check for uninitialized base address
1250  Module gl518sm: Standardize /proc entries in0-3
1251  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1252               fan -> fan1; fix temp2 limit writes
1253  Module pcf8574: Add support for PCF8574A; /proc interface changed
1254  Module pcf8591: new
1255  Module sis5595: Blacklist 645, 735
1256  Module w83781d: Add W83697HF support; allow force_subclients parameter
1257                  for Tyan 2460
1258  Programs, Update for new /proc names
1259  Program new
1260  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1261                   add text output
1262  Program init/sensors: New SysV init script
1263  Program Add support for fscscy, add more help entries
1264  Program p4b_smbus: new
1265  Program rrd: Install summ_week.cgi
1266  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1267                   clean up chassis intrusion prints
1268  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1269                          fix Via686a and it87 detection;
1270                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1271                          fix uninitialized values; it87 beats lm78
12732.6.2 (20011118)
1274  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1275  Chip Modules (all): malloc.h -> slab.h
1276  Modules (all): Add MODULE_LICENSE("GPL")
1277  File doc/FAQ: More updates and additions
1278  File Fix it87 in5,in6 (-12,-5) calculations
1279  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1280           update it87 alarm ID's.
1281  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1282  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1283  Module i2c-amd756: Improve busy handling/printk's
1284  Module i2c-i801: Add 82801CA/CAM support
1285  Module i2c-keywest: Sync with PPC people, it works now
1286  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1287  Module i2c-viapro: Add Via VT8233 support
1288  Module it87: Merge alarm_* /proc entries to alarms
1289  Module sis5595: Fix support for rev B0
1290  Module via686a: Make limit initializations reliable
1291  Module w83781d: Allow init=0 parameter to bypass initialization
1292  Program isadump: Add flat address space (PCI) support
1293  Program Add support for i2c-ali1535, adm1024, ds1621,
1294                      fscpos, it87, maxilife, mtp008
1295  Program sensors: Fix w83781d temp precision
1296  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1297                          Fujitsu Poseidon and Scylla,
1298                          Intel 82443MX and 82801CA/CAM detection,
1299                          add ITE 8172G detection (driver in kernel 2.4.10)
13012.6.1 (20010830)
1302  File BUGS: Updated
1303  File doc/FAQ: More updates and additions
1304  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1305  File Fix/enhance it87 section
1306  Library: ds1621 and it87 updates
1307  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1308  Module i2c-amd756: Add AMD 766 support
1309  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1310  Module i2c-piix4: Add Serverworks CSB5 support
1311  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1312  Module adm1025: Fixed temp2 min/max writes
1313  Module ds1621: Add 12-bit precision mode
1314  Module it87: Enable all alarms, add in8 support, add sensor type selection
1315  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1316                  remove support for module
1317  Module sis5595: Recognize unsupported chips and refuse to load
1318  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1319  Program eepromer: new
1320  Program Fix dependencies on i2c-proc; disallow compilation
1321                      of sensors.c as a module in kernel
1322  Program sensors: it87 updates; adjust temp. precision for some chips
1323  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1324                          recognize unsupported SiS chips;
1325                          recognize AMD 766 and Serverworks CSB5.
13272.6.0 (20010612)
1328  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1329        If your make fails because it can't find <linux/i2c-proc.h>, you
1330        forgot this step!!!
1331  File doc/FAQ: Many, many updates and additions
1332  File doc/busses/i2c-sis5595: new
1333  File doc/busses/i2c-tsunami: new
1334  File doc/chips/it87: new
1335  File doc/chips/via686a: Claim support for 686b.
1336  File README.thinkpad: new
1337  File Adjust as99127f in5 (-12V) and temp2 calculations;
1338                        Add lm87, adm9240, ds1780, lm81 templates;
1339                        Enhance help comments in file;
1340                        Add Tyan S2510 dual-MTP008 example;
1341                        Make separate sis5595 section.
1342  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1343  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1344  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1345           Add support for maxilife-nba and amd1024;
1346           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1347  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1348  Chip Modules (all): Change from sensors_* to i2c_* globals
1349                      for new i2c-proc.[ch]
1350  Makefiles: enhance to support Alpha architecture
1351  Module adm1021: Fix lm84 and gl523sm support
1352  Module adm1024: new
1353  Module i2c-i801: Chip detection cleanup
1354  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1355  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1356  Module i2c-tsunami: New
1357  Module i2c-via: Ensure i2c bus is tristated correctly.
1358  Module it87: new driver for IT8705, IT8712, Sis950 chips
1359  Module lm78: Recognize chipid=0x20
1360  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1361  Module mtp008: Fix temp initializations;
1362                 Save BIOS pin configuration of temps and fans;
1363                 Fix sensor type reads/writes and fan min writes;
1364                 Fix spurious invalid sensor type messages
1365  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1366                  used for patched kernel now.
1367                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1368  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1369                  Allow force_addr=0xaddr
1370  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1371  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1372                  reading changes; Add messages for subclient
1373                  registration failure
1374  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1375  Program i2cset: new
1376  Program isadump: fix for Alpha arch. compiles
1377  Program Fix adm9240 typos; Add more chips to;
1378                      Remove ltc1710; Fix i2c_sis5595 typo;
1379                      Support kernel 2.4.5 makefile change;
1380                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1381  Program sens_update_rrd: new
1382  Program sensord: Add -d (debug) and -p (pid-file) options
1383  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1384                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1385                   Change mtp008 temps from max/min to limit/hyst;
1386                   Add maxilife-nba, adm1024, it87 support.
1387  Program sensors-detect: Recognize lm78 with chipid=0x20;
1388                          Recognize SMSC Victory66 South Bridge;
1389                          Add devfs /dev/i2c/x support;
1390                          Add adm1024, it87xx support; Add thinkpad warning.
1391  Program tellerstats: new
13932.5.5 (20010115)
1394  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1395        you have kernel 2.4.0-prerelease or greater.
1396  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1397  File doc/developers/proc: new
1398  File Add mtp008 entries, adm1025 entries
1399  Library: Add ds1621, mtp008 support
1400  Module adm1021: Add support for adm1021a / adm1023
1401  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1402  Module adm1025: Add support for remote temp; rename /proc entries to
1403                  in[0-5] and temp[1-2]; fix negative temp readings
1404  Module adm9240: Rename /proc entries to in[0-5]
1405  Module ddcmon: allow force and force_ddcmon parameters
1406  Module ds1621: new
1407  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1408  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1409  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1410  Module lm87: cleanup, update voltage calculations
1411  Module mtp008: new
1412  Module pcf8574: change update time to 5 seconds
1413  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1414  Module w83781d: fix beep setting via /proc
1415  Programs editticket, readticket: new
1416  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
1417  Program more fixes; now adds many more modules
1418  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1419                   add adm1025 temp2; report temp limits correctly as
1420                   min/max or limit/hysteresis; print message if no
1421                   sensors are found. Removed false errors from lm87 reads.
1422  Program sensors-detect: Add ds1621, mtp008 detection;
1423                          add ServerWorks detection
14252.5.4 (20001012)
1426  Module i2c-viapro: Add support for Via 596B (0x3051)
1427  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1428  Program fixed infinite loop
1429  Program sensors-detect: Detect Via 596B (0x3051)
14312.5.3 (20001008)
1432  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1433  File useful_addresses.html: update
1434  Library: Add lm87 support
1435  Module pcf8574: new
1436  Module i2c-ali1535: new
1437  Module i2c-ali15x3: removed force #ifdef.
1438  Module i2c-i801: support Intel 82801BA (815E chipset)
1439  Module i2c-i801: add i2c block write support, fix smbus block bugs
1440                   (requires i2c 2.5.3 package)
1441  Module i2c-i810: support Intel 82815
1442  Module lm87: new
1443  Module sensors: Fix for kernel 2.4.0-test8
1444                  (remove copy_to_user_ret and put_user_ret)
1445  Module w83781d: limit fan divisors to 8 max. for as99127f
1446  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1447  Program i2cdump: Add smbus block read support
1448  Programs i2cdetect, i2cdump: Improve error reporting
1449  Program sensors: new switch -u (--unknown)
1450  Program sensors-detect: detect Intel 82801BA (815E chipset)
1451  Program sensors-detect: detect Intel 82815
1452  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1453  Program sensors-detect: detect National LM87
1454  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1455  Program sensors-detect: Improve error reporting
14572.5.2 (20000709)
1458  File Fix lm80 in8 calculation
1459  Module w83781d: W83783S no longer crashes on unloading
1460  Program sensors-detect: more robustness in case of unknown i2c adapters
1461  Program sensors-detect, libsensors: fix eeprom size reporting
1462  Program sensord: more flexibility, support for alarm scanning etc.
1463  Program sensors: support for ignore setting on sensor alarms.
1464  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
14662.5.1 (20000618)
1467  Library: Add adm1025 support
1468  Module adm1025: new
1469  Module ddcmon: Fixed bus scan which could hang SMBus
1470  Module i2c-keywest: new
1471  Module maxilife: Add support for Maxilife '99 (NBA)
1472  Module via686a: Enable sensors if not enabled by BIOS
1473  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1474  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1475  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1476  Module w83781d: Fis as99127f fan speed (was 66% too high)
1477  Module w83781d: Improve beep input checking
1478  Program i2cdump: Add Winbond-style bank selection
1479  Program isadump: Add Winbond-style bank selection
1480  Program sensors: Add adm1025 support.
1481  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1482  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1483  File Add Maxilife '99 entries
1484  File Remove some as99127f entries.
1485    Note: For as99127f, reinstall manually (make install
1486          won't reinstall it) or else 'sensors -s' will fail.
14882.5.0 (20000312)
1489  Dropped all kernel 2.0 and 2.1 compatibility
1490  Module i2c-i810: new
1491  Module ddcmon: new
1492  Module via686a: new
1493  Module i2c-amd756: fixed region request
1494  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1495  Module w83781d: Don't change pin settings at initialization;
1496                  also fix chip detection.
1497  Library: Support for ddcmon and via686a
1498  Program sensors-detect: Support for ddcmon and via686a
1499  Program sensors: Support for eeprom, ddcmon and via686a
15012.4.5 (20000116)
1502  Introduced DESTDIR installation prefix
1503  Module lm80: fixes, temperature now read and set correctly
1504  Module i2c-voodoo3: driver enhancements
1505  Module w83781d: fixes, AS99127 works much better now
1506  Library: New ignore keyword in config file
1507  Programs: Support for new ignore keyword
1508  Program sensors-detect: Support for MGA detections
15102.4.4 (19991201)
1511  Addition of the alpha release of AMD 756 SMBus host support.
1512  Many fixes and updates to the gl518sm driver
1513  Updates and fixes for device detection
15152.4.0 (19990920)
1516  Too much to list.
1517  i2c and smbus parts are split off to a separate i2c package.
1518  New drivers and other stuff.
15202.3.4 (19990616)
1521  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1522  All: Now compiles against kernel 2.0.x (again ;)
1523  Module gl518sm: some updates and refinements
15252.3.3 (19990603)
1526  All: Now compiles against kernel 2.3.x (x >= 1)
1527  Module i2c-voodoo3: Timing issue fixes
1528  Module bt869: Seems to be functional and relatively well tested
1529  Many modules were modified to be more compatible with the new
1530   Mutex structure in the new experimental kernels.
15322.3.2 (19990507)
1533  Module i2c-hydra: Now compiles on 2.0.x kernels
1534  Module i2c-lm75: Slightly better detection
1535  * New, but not compiled by default:
1536  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1537  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
15392.3.1 (19990501)
1540  All: Now compiles on PPC
1541  Module i2c-hydra: NEW
1542  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1543  Module w83781d: Removed deadlock (mutex was not initialized)
1544  Documentation: A few glitches removed
1545  Makefile: default module installation directory is now
1546            /lib/modules/current/extra/misc
1547  Program sensors-detect: PPC Hydra now detected
1548  Program sensors: Now prints complete GL518SM information
1549  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
15512.3.0 (19990422)
1552  All: Many, many changes and improvements
1553  All: Many small bugs and problems removed
1554  Modules: New insmod parameters
1555  Modules: Much improved chip detection
1556  Module maxilife: NEW
1557  Module adm1021: MAX1617A now also supported
1558  Module adm9240: DS1780 now also supported
1559  Module w83781d: W83782D and W83783S now also supported
1560  Program sensors-detect: NEW
1561  Library: All chips now supported
1562  Documentation: Very much improved
15642.2.2 (199903??)
1565  Just some minor updates and bug fixes.
15672.2.1 (19990218)
1568  All: Removed compile warnings
1569  Module i2c-dev: Small bug removed if DEBUG=1 was used
1570  Module sis5595: Now compiles for 2.0 kernels
1571  Module adm1021: Detection corrected
15732.2.0 (19990216)
1574  All: Set copyrights to include 1999
1575  All: Small bugfixes
1576  I2C: Upgraded to newest archive of Simon Vogl
1577  Module i2c-dev: NEW
1578  Module i2c-ali15x3: NEW
1579  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1580     directories, and somewhat improved
1581  Module sis5595: NEW
1582  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1583  Library: Support for new chip drivers, several small bugs fixed
1584  Library manual pages: NEW
1585  Program i2cdetect: Moved to detect directory
1586  Program NEW
1587  Program doc-features: NEW
1588  Program sensors: Added man-page
1589  Document BUGS: Added cdrom bug and kernel i2c conflict
15912.1.2 (19990116)
1592  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1593  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1594  Documentation in doc/kernel: NEW
15962.1.1 (19990107)
1597  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1598                     and older
1599  Module gl518sm.o: Miscelaneous bugs and problems solved
1600  Program isadump: NEW
16022.1.0 (19981230)
1603  Library: Completely NEW
1604  Program sensors: NEW
1605  Program grab_busses: NEW
1606  Program decode-dimms: More information
1607  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1608  Module w83781d.o: NEW
1609  Module lm80.o: NEW
1610  Module gl518sm.o: new procfile beep, several small updates
1611  Modules: Now use pin readings, no more scaling within the kernel (use the
1612           library instead)
16142.0.2 (19981214)
1615  Module eeprom.o: NEW
1616  Program decode-dimms: NEW
1617  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1618           2.1.58
1619  Modules: Somewhat less verbose on transfers
1620  Module lm78.o now recognizes and handles lm78-j and lm79
16222.0.1 (1998121?)
1623  Module gl518sm.o updates, to make it actually work
1624  Module lm75.o high/low-byte swapping write bug fixed
16262.0.0 (19981209)
1627  Initial release
Note: See TracBrowser for help on using the browser.