root/lm-sensors/trunk/CHANGES @ 4574

Revision 4574, 81.6 KB (checked in by khali, 8 years ago)

Add support for the EMC6D102 extra resolution bits. The chip offers
4 extra resolution bits per voltage and temperature channel, but I
chose to use only 2 bits per channel because that's what the ADM1027
has so it made the changes smaller. The EMC6D102 has a 10-bit ADC
anyway, the 2 remaining bits are obtained from averaging so they are
not so important.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
5  File doc/vid: Update the sysfs paths, update the chip lists
6  File i2c-dev.h: Support I2C block reads with specified length
7  File Add a dme1737 section
8  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
9  Library: Clean up pwm symbol names translation
10           Add dme1737 support
11           Add applesmc support
12           Add w83627ehf support (for Linux 2.4)
13           Add support for the w83627ehf VID function
14           Add support for the w83627ehf thermal sensor types
15           Add support for it87 fan4 and fan5
16  Man page sensors.conf.5: Update the chip statement section
17  Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
18  Module lm85: Fix setting the fan speed min limit to 0
19               Add support for the EMC6D102 extra resolution bits
20  Module thmc50: Fix the i2c address range
21  Module w83627ehf: New (2.6 backport)
22  Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
23  Program i2cdump: Use the new I2C block read function
24  Program isadump: Detect when address bit 7 is a busy flag
25                   Fix Super-I/O exit sequence for Winbond/Fintek chips
26  Program fancontrol: Use let for arithmetic evaluation
27                      No longer need awk and grep
28                      Limit calls to external programs (Linux 2.6 only)
29                      Check for configuration file validity
30                      Support optional min and max PWM values
31                      Better integration with init scripts
32  Program pwmconfig: Use smaller steps for low PWM values
33                     Support optional min and max PWM values
34  Program mkpatch: Include w83627ehf
35  Program rrd: Support non-i2c devices (hwmon class)
36               Add missing shell declarations
37               Update URI
38  Program sensors: Drop ddcmon and eeprom support
39                   Add dme1737 support
40                   Add applesmc support
41                   Add max6680 support
42                   Fix alignment of alarm for one-limit temperatures
43                   Add w83627ehf support (for Linux 2.4)
44                   Add support for the w83627ehf VID function
45                   Add support for the w83627ehf thermal sensor types
46                   Add support for it87 fan4 and fan5
47                   Display the extra resolution bits of the emc6d102
48  Program sensors-detect: Stop Super-I/O probe after first family success
49                          Fix SMSC DME1737 detection
50                          Add /usr/sbin to the PATH (#2199)
51                          Add ATI SB700 detection
52                          Add Maxim MAX6680/MAX6681 detection
53                          Add IT8726F detection
54                          Fix IPMI support for 2.6 kernels
55                          Add detection for non-standard SMSC Super-I/Os
56                          No longer depend on i2cdetect
57                          Add SMSC SCH5317 detection
58                          Drop detection of most non-sensors I2C chips
59                          Fix ADM1022 detection
622.10.3 (20070319)
63  Library: Do not skip i2c adapters with only a class device and no
64            physical device. This change is required to survive the
65            planned struct class_dev removal from future 2.6 kernels.
66           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
67           Recognize i2c-isa-based devices as such even after class_dev
68            is gone
69           Compile with -D_REENTRANT
70           Fix support of Linux 2.6's max6650 driver
71           Fix max1619 support
72  Man page i2cdetect.8: Scanning range can be restricted
73  Module bmcsensors: Fix debugging messages
74  Module i2c-ali1563: Improve the status messages (2.6 backport)
75                      Fix device initialization (2.6 backport)
76  Module i2c-amd8111: Cleanups (2.6 backport)
77                      Fix initialization race (2.6 backport)
78  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
79  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
80  Module i2c-viapro: Add CX700 support (2.6 backport)
81  Module smsc47m1: Add SMSC LPC47M292 support
82                   Get rid of a useless semaphore (2.6 backport)
83  Programs i2cdetect, i2cdump, isadump: Flush output in real time
84  Program i2cdump: Cleaner output in SMBus block read mode
85  Program Fix pwmN_enable access (#2190)
86  Program sensors: Add smsc47m2 support (fans)
87                   Fix -A option (hide adapter name) on error
88  Program sensors-detect: Only probe relevant I2C addresses
89                          Drop ARP-capable device detection
90                          Add Maxim MAX6655/MAX6656 detection
91                           (Olexiy Avramchenko)
92                          Add Maxim MAX1668, MAX1805, MAX1989 detection
93                          Add VIA CX700 detection
94                          Drop legacy W83627HF ISA detection
95                          Don't bufferize stdout during probes
96                          Speed up the LM75 and LM77 detection
97                          Clean up the EEPROM detection
98                          Add Dallas DS75 detection
99                          Add SMSC LPC47M292 detection
100                          Add nVidia MCP61 and MCP65 detection
101                          Fix ADM1028 detection
102                          Add Nat. Semi. PC8347L Super-I/O detection
103                          Add SMSC SCH5504 Super-I/O detection (no sensors)
104                          Make the LM78 and W83781D detection safer
1072.10.2 (20070115)
108  RPM: Obsolete, removed
109  File doc/fan-divisors: Update
110  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
111  Library: Add support for the pc87247 driver (fans only)
112           Probe for busses before chips
113           Drop support for algorithm names
114           Add support for coretemp driver   
115           Major update/optimization of config-file scanner
116           Add config-file scanner regression tests
117           Add f71872f support
118           Add w83627dhg support (David Holl, #2157)
119           Get the i2c adapter names from
120           Add adm1029 support (Corentin Labbe)
121  Man page i2cdetect.8: Describe the output convention
122  Man page sensors.1: Update (option -c) and clean up
123  Module bmcsensors: Fix several warnings
124                     Fix fragile structure initialization
125  Module i2c-i801: Add ICH9 support
126  Module p4b_smbus: Add support for the ICH5
127  Module f71805f: Fix the device address decoding (2.6 backport)
128  Module icspll: Delete. It was useless and dangerous.
129  Program Remove spaces at end of lines
130  Program eepromer: Fix loads of warnings
131  Program i2cdetect: Make the output clearer
132  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
133  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
134                            without need of recompilation.
135  Programs dump/*: More robust handling of user inputs
136  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
137                                  Add support for non-i2c drivers
138  Program Disable debugging by default
139                         Add support for non-i2c drivers
140                         More tolerant config file parsing
141  Program sensord: Add pc87247 support (fans only)
142                   Add vt1211 support (#2150)
143                   Add w83627dhg support (David Holl, #2157)
144                   Add w83627ehf voltage support (Dave Platt)
145                   Add k8temp support (Dave Platt)
146  Program sensors: Add pc87247 support (fans only)
147                   Hide error on missing f71805f fan
148                   Handle option -c more efficiently
149                   Drop option -a (show algorithm names)
150                   Add f71872f support
151                   Add w83627dhg support (David Holl, #2157)
152                   Add adm1029 support (Corentin Labbe)
153                   Hide error on missing w83793 temp (Gong Jun)
154  Program sensors-detect: Add SMSC DME1737 detection
155                          Add Fintek F71882FG and EPoX EP1308 detection
156                          Add Intel Core thermal sensor detection
157                          Preallocate memory for I2C_FUNCS ioctl (#2138)
158                          Prevent misdetection of MAX6633/MAX6634/MAX6635
159                          Add Intel ICH9 detection
160                          Add Maxim MAX6648/MAX6692 detection
161                          Improve ADM1029 detection
162                          Add Andigilog chips detection
163                          Add Intel AMB FB-DIMM thermal sensor detection
164                          Add ATI SB600 detection
1672.10.1 (20060924)
168  File doc/developers/checklist renamed to dev/developers/release_checklist
169          with clarifications and updates for new SVN server.
170  File README.package: Delete.
171  File doc/busses/i2c-piix4: Update (2.6 backport)
172  File doc/developers/sysfs-interface: Update
173  File etc/ Add an smsc47m192 section
174                            Comment out all set statements
175                            Add an it8716 section
176                            Add a w83793 section
177                            Adjust the vt1211 section to match the new driver
178                             interface
179  Library: Fix device scan when no i2c support is present
180           Add support for W83627EHF voltage inputs and alarms
181           Add support for the smsc47m192 driver
182           Fix all memory leaks (yeah!)
183           Fix no sensors being reported as an error
184           Add support for the IT8716F and IT8718F chips
185           Add support for the W83793 chip (Yuan Mu)
186           Map the 2.6 adm1026's fan8 to fan0
187           Missing sysfs busses and classes are not errors
188           Change vt1211 temp3-7 magnitude from 1 to 3
189  Makefile: Don't grep autoconf.h on user-space targets
190            Fix depmod on non-running kernel version
191            Remove empty include directories on make user_uninstall
192  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
193  Module i2c-amd756-s4882: Improve static semaphore initialization
194                           (2.6 backport)
195  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
196                   Add ICH8 support (2.6 backport)
197                   Fix block transaction poll loops (2.6 backport)
198                   Remove PCI function check (2.6 backport)
199                   Cleanups (2.6 backport)
200  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
201  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
202                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
203                    Drop the fix_hstcfg parameter (2.6 backport)
204  Module i2c-viapro: Fix compilation with kernels < 2.4.21
205                     Add VT8237A and VT8251
206  Module lm83: Add LM82 support (2.6 backport)
207  Module vt1211: The VT1211 has no in6
208                 Rework the voltage and temperature conversions and the
209                  temperature input order to match the Linux 2.6 driver
210  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
211                  Add specific alarm and beep defines for the W83791D
212  Module w83792d: Fix PWM range (2.6 backport)
213  Program Decode depending on the memory type
214                           Decode the manufacturing date to an ISO8601 date
215                           Add the memory size computation and provide brief
216                            timing characteritics for SDRAM/DDR/DDR2 memory
217                           Add memory size computation for Rambus memory
218                           Various output cleanups and fixes
219  Program Add /usr/sbin or /usr/local/sbin to $PATH if needed
220  Program Detect and skip false positives
221  Program i2cdetect: Add a mode to print adapter functionalities
222  Program i2cdump: Restore bank after bank switching
223                   Add new mode W (read word on even register addresses)
224  Program mkpatch: Fix typo breaking f71805f
225                   Turn warnings on (-w), and fix them
226                   Print a usage message on missing command line parameters
227  Program pwmconfig: Use mktemp instead of tempfile
228  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
229                   Add smsc47m192 support
230                   Add abituguru support (Hans de Goede)
231                   Fix memory leak when printing an unknown chip
232                   Add it8716 and it8718 support
233                   Make each it87 fan and fan div optional
234                   Print missing w83791d values
235                   Add w83793 support (Yuan Mu)
236                   The adt7463 may not have in4 (#2119)
237                   Hide more vt1211 missing input errors
238                   Clearer error messages when no sensors found
239  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
240                          Add ATI IXP200/300/400 SMBus detection
241                          Prevent warning on 64-bit PCI addresses
242                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
243                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
244                           F75384S/M, F75387SG/RG and F81218D detection
245                          Add Winbond W83793R/G and W83627DHG detection
246                          Handle the W83791D driver difference between kernels
247                          Add nForce4 MCP04, MCP51 and MCP55 detection
248                          Add AMD Geode devices detection
249                          Add ITE IT8716F and IT8718F detection
250                          Add NatSemi/Winbond PC87427 detection
251                          Get driver information for busy addresses from
252                           sysfs (2.6 only)
253                          Drop the ISA IT87xxF detection
254                          Check i2c adapter functionalities before probing
255                          Add Intel ICH8 SMBus detection
256                          Add AMD K8 thermal sensors detection
257                          Simplify detection of SiS5595, VIA686 and VT8231
258                          Add Analog Devices ADM1033, ADM1034, ADT7462,
259                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
260                          Check for root user at startup
261                          Attempt to be slightly more user-friendly
262                          Add VT8237A and VT8251
263                          Remove detection of nVidia graphics adapters
264                          Use sysfs for PCI device enumeration
265                          Add generic PCI SMBus adapter detection
266                          Add generic Super-I/O logical device detection
267                          Add SMSC LPC47M172/182 detection
2702.10.0 (20060214)
271  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
272  File doc/busses/i2c-viapro: Update (2.6 backport)
273  File doc/chips/via686a: Update (2.6 backport)
274  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
275  File etc/ Do not set vrm by default
276  File i2c-dev.h: Fix union i2c_smbus_data definition
277                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
278                  Add missing parentheses around macros
279                  Drop I2C_FUNC_SMBUS_EMUL
280                  Drop I2C_FUNC_SMBUS_*_PEC
281                  Drop I2C_SMBUS_*_PEC
282  File sensors_vid.h: Drop default VRM
283  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
284           This is intentional.  Use if you still
285           need your memory SPD data.
286  Library: Big update to use libsysfs.  More TODO though.
287           Fix bus matching code for Linux 2.6 (Karsten Petersen)
288           Add f71805f, w83687thf support
289           Add platform drivers support
290           Fix sysctl warnings on x86_64
291           Restore vt1211 temp1
292  Makefile: Compile user-space programs with -Wundef
293  Module i2c-i801: Simplify the hardware PEC code
294                   Always set PEC mode explicitly before each transaction
295  Module i2c-i810: Documentation update, PCI IDs cleanup
296  Module i2c-keywest: Remove bus probing code (2.6 backport)
297  Module i2c-nforce2: Remove dead code (2.6 backport)
298                      Add the ID of the nForce4 MCP-04 (2.6 backport)
299  Module i2c-via: Remove dead code
300  Module i2c-viapro: Remove dead code
301                     Support I2C block read (2.6 backport)
302                     Code cleanups (2.6 backport)
303                     Improve debug register dump (2.6 backport)
304  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
305          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
306          i2c-sis645: Use pci_driver name to request I/O region; do
307                      not initialize i2c_adapter name to "unset" (2.6
308                      backport)
309  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
310                                              (2.6 backport)
311  Module adm9240: Cleanups (2.6 backport)
312  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
313  Module it87: Minor cleanups
314               Fix fan3_div setting bug (Anton V. Staaf)
315  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
316               Separate the register read function
317               Add PEC support for the ADM1032
318  Module via686a: Cleanups
319  Module w83627hf: Drop useless initialization step (2.6 backport)
320                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
321                   Fix alarms (Yuan Mu)
322                   Preserve fan min on fan div change (Yuan Mu)
323                   Properly handle W83627THF without VID (Yuan Mu)
324                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
325                   Add W83687THF support
326  Module w83781d: Drop W83697HF support (Grant Coady)
327  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
328                  Fix fan control mode (PWM/DC) reporting
329                  Fix fan div auto-adjust (Yuan Mu)
330                  Fix the subclient handling
331  Module w83l785ts: Minor cleanup (2.6 backport)
332  Module vt1211: Restore temp1
333  Modules vt1211, vt8231: Change default VRM to 9.1
334  Program Add lookup tables for manufacturer names
335                           Fix rounding error in PCxxxx speed computation
336                           Improve text output
337                           Improve speed under Linux 2.6
338                           Verify checksum before decoding anything
339                           Improve manufacturing location decoding
340                           Improve memory type detection
341                           Improve part number decoding
342  Program i2cdump: Drop now useless #ifdef tests
343                   Fix capability check for continuous byte mode
344  Program i2cget: New
345  Program i2cset: Add PEC support
346                  Fix argc check
347  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
348                                       Print the correct bus type if bus
349                                       functionality can be queried
350  Program isadump: Display the real addresses in flat mode
351  Program Silently skip already existing nodes
352  Program mkpatch: Include f71805f
353  Program sensord: Do not log algorithm names
354                   Drop EEPROM support (Aurelien Jarno)
355                   Add W83627EHF, F71805F/FG support
356                   Fix PC87365/PC87366 alarms
357  Program sensors: Drop free_the_label
358                   Fix compilation with uclibc (no iconv)
359                   Add f71805f, w83687thf support
360  Program sensors-detect: Drop algorithm names
361                          Do not rely on i2cdetect -l printing algo names
362                          Simplify adapter name matching mechanism
363                          New address for ADM1032, ADT7461
364                          Improve ADT7467, ADT7468 support
365                          Fix MAX6659 reported driver
366                          Add Fintek F71805F detection
367                          Add Analog Devices ADT7476 detection
368                          Add Intel 82845G detection
369                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
370                          Fix udev detection in some corner case
371                          Improve DS1621 detection
372                          Always prefer ISA access over SMBus access
3752.9.2 (20050906)
376  File doc/chips/*: Big update (2.6 backport)
377  Library: Drop ds1780-specific code (now use adm9240)
378           Fix memory leak in sensors_get_label()
379           Support /sys/class/hwmon (Linux 2.6.14+)
380           Limit stack usage in sensors_read_proc_chips()
381  Makefile: Detect 2.6+ kernels and check targets
382  Man page isaset.8: Fix typos
383  Module adm1031: Fix broken kfree() calls
384  Module i2c-ali1563: New (2.6 backport by Winbond)
385  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
386  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
387          w83627hf.c: Tag find function __init
388  Module lm93: Fix memory leak
389  Module smsc47m1: Fix PWM enable polarity on read
390  Modules w83627hf, w83781d: Allow setting fan divisor to 128
391  Program Support Linux 2.6 (Burkart Lingner)
392                           Added DDR/DDR2 frequency reporting in convenient
393                           form of DDRxxx PCyyyy
394  Program i2cdump: Properly handle short i2c block reads
395  Program Fix compile errors
396  Program mkpatch: Include i2c-ali1563
397                   Include w83792d
398  Program pwmconfig: Fix unsafe temporary file use
399  Program rrd: Support 2.6 kernels
400  Program sensord: Add support for w83637hf
401                   Support pc87360 (Henrik Brix Andersen)
402  Program sensors: Support the VAIO "VGN" prefix for eeprom
403  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
404                          Advertise the w83792d driver
405                          Improve IT8705F and IT8712F detection
406                          Merge LM82 and LM83 detection
407                          Add W83687THF detection
4102.9.1 (20050412)
411  File doc/busses/i2c-nforce2: Update
412  File doc/chips/it87: Update
413  File doc/chips/lm90: Update for adt7461
414  File doc/chips/mic74: New
415  File etc/ New sections for lm92 and w83792d
416  Library: Add support for 2.6 fscpos driver (Stefan Ott)
417           Fix sis5595 in4 (Aurelien Jarno)
418           Add support for 2.6 gl520sm driver (Maarten Deprez)
419           Add support for 2.6 bmcsensors driver (Yani Ioannou)
420           Add support for w83792d (Chunhao Huang/Winbond)
421           Add support for 2.6 adt7461 (James Chapman)
422           Add support for 2.6 lm92
423           Add support for 2.6 vt1211
424           Add preliminary support for 2.6 w83627ehf
425  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
426            Use -fno-strict-aliasing on all architectures
427  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
428  Module bmcsensors: Fix compile error
429                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
430  Module ds1621: Fix detection (Aurelien Jarno)
431  Module eeprom: Discard SPD-centric checksum module parameter
432                 Cleanup detection function (backport from Linux 2.6)
433  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
434  Module i2c-i801: Temporarily disable broken I2C block read
435  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
436                   Gelato)
437  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
438  Module i2c-viapro: Prevent repeated resets
439  Module it87: Improve Super-I/O detection
440               Limit I2C address range
441               Support VID on the IT8712F
442  Module lm75: Only initialize CMP/INT bit
443  Module lm78: Fix bug with setting negative temperature limits
444  Module lm85: Properly differentiate between ADM1027 and ADT7463
445               Add EMC6D102 support
446  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
447               Add limited ADT7461 support
448  Module lm93: Fix IN10 (+5V) scaling
449  Module mic74: New
450  Module w83627hf: Support secondary Super-I/O address
451                   Enable temp2 and temp3 if they are disabled
452  Module w83781d: Revert AS99127F temp2 and temp3 computation change
453                  Skip final initialization step for AS99127F chips
454  Module w83792d: New (Chunhao Huang/Winbond)
455  Program ddcmon: New; user-space replacement for the ddcmon driver
456  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
457  Program isadump: Handle Super-I/O keys
458  Program lm_sensors.init: Cleanups (Axel Thimm)
459  Program Add basic command-line interface
460  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
461  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
462                     Don't complain about read-only enable files (lm85)
463                     Fix handling of alternate config file name
464  Program sensord: Fix erroneous error message (Aurelien Jarno)
465                   Support sis5595 in4 (Aurelien Jarno)
466                   Support w83627thf
467                   Support the separate it8712 prefix (Aurelien Jarno)
468  Program sensors: Display sis5595 in4 (Aurelien Jarno)
469                   No errors on missing pc87360 fans
470                   Add gl520sm support (Maarten Deprez)
471                   Improve vt1211 error/ignore handling (Michael Carland)
472                   Support w83792d, w83627ehf
473  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
474                          Improve IT8705F and IT8712F detection
475                          Improve udev detection
476                          Fix DS1621 detection
477                          Add W83627EHF detection
478                          Add ATI SMBus detection
479                          Add VT1211 alias detection
480                          Warn if chip modules not found
481                          Add i2c-ipmi to list if bmcsensors is on it
482                          Add PC87591 detection
483                          Search for correct udev db file name
484                          Add nForce3 250Gb and nForce4 detection
4872.9.0 (20041228)
488  NOTE: Requires i2c-2.9.0 or newer!
489  File README.thinkpad: Update
490  File doc/chips/it87: Cleanups
491  File doc/chips/lm63: New
492  File etc/ Set via686a voltage limits
493  File kernel/chips/ Resync module list with mkpatch
494  File kernel/include/sensors_compat.h: Define __devexit_p if missing
495                                        (kernels 2.4.16 and older)
496  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
497                             and dec_use removed in release 2.8.0
498  Modules (all chip drivers): Remove owner from i2c_driver; pass
499                              controlling_mod to i2c_register_entry() again
500  Module bmcsensors: Support function 1/x
501  Module i2c-amd756: Display the real bus name
502  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
503  Module i2c-i801: Support i2c block read (ICH5 and higher)
504                   Add PEC support for ICH6
505                   Add support for ICH7
506  Module i2c-ipmb: Remove from build since it doesn't work
507  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
508  Module icspll: Fix compilation
509  Module lm63: New driver for the National Semiconductor LM63
510  Module lm83: Use signed types for temperatures
511               Check limits on register writes
512  Module lm87: Round voltages properly
513               Retry on read errors (David Knierim)
514               Less agressive init (no reset)
515  Module lm90: Use signed types for temperatures
516               Check limits on register writes
517  Module lm93: Added module parameter for VID pin input thresholds.
518               Fix typo in dynamic VID alarms
519               Adds a couple log messages for failed transactions (David
520               Knierim)
521               Fix compilation breaking C99-ism (Axel Thimm)
522               Fix block read retries
523  Module pc87360: Support secondary Super-I/O address
524  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
525  Library: Add lm63 support
526           Add lpc47b397 support
527  Programs *.init: Rename lockfile to match file name
528  Programs i2cset, isaset: Written byte/word can be masked
529  Program Find eeproms on non-0 i2c bus too
530  Program mkpatch: Include i2c-amd756-s4882
531  Program pwmconfig: Handle new (well, back to old) pwm files names for
532                     Linux 2.6.10 and up
533  Program sensord: Do not scale load average (Aurelien Jarno)
534  Program sensors: Add lm63, lpc47b397 support
535                   Support DDR2 memory module EEPROMs (Rudolf Marek)
536                   Support only one location for the default configuration file
537                   Display the default configuration file location in --help
538                   Simplify the configuration file opening code
539  Program sensors-detect: Improve LM63 detection
540                          Discard IBM Thinkpad detection code
541                          Add PCA9556, LPC47B397, ICH7 detection
542                          Fix W83792D detection, add W83791SD detection
5452.8.8 (20041007)
546  File doc/donations: Update
547  File doc/lm_sensors-FAQ.texi: Add 4.6.1
548                                Update 4.7
549  File doc/chips/gl518sm: Update "iterate" info
550  File doc/chips/it87: Discard outdated module parameters
551  File doc/chips/lm75: LM77 is not supported
552  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
553  File doc/chips/lm93: New
554  File doc/chips/w83l785ts: Improvements
555  File etc/ Fix it87 lines order
556                            Update lm87 section
557  File kernel/include/sensors_vid.h: Support VRM 10.0
558  Library: Support 2.6 adm1025
559           Preliminary support for 2.6 lm87
560           Support 2.6 adm9240
561           Allow an alternative sysfs file name for chip features (2.6)
562           Fix lm83 critical limits (2.6)
563           Add lm93 support
564           Prevent some procfs errors from being silently ignored
565  Makefiles: Implement user_uninstall (Rudolf Marek)
566             Spoof LOGNAME and HOSTNAME when making html man pages
567  Module adm1025: Refine detection
568                  Update limit registers again (revert of 2.8.1)
569                  Init high limits if they read 0
570                  Fix conversions
571  Module lm75: Refine detection
572  Module lm78: Fix init
573  Module lm83: Default to kind lm83 if forced.
574               Fix temperature macros.
575  Module lm90: Add LM86, MAX6657 and MAX6658 support
576  Module lm93: New
577  Module mtp008: Fix the setting of limits on temp2
578  Module pca9540: Refine detection
579  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
580                  Support VID
581                  Fix fan_div file when fan count is less than 3
582                  Additional init and debug
583  Module smsc47m1: Fix pwm_enable being inverted
584  Module w83627hf: Add alternate VCORE/in0 calculation method
585                   Remove reset of chip by driver on initialization
586  Module w83781d: Fix default VRM for w83791d
587  Module w83l785ts: Implement read error handling (backport from 2.6)
588  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
589                    Wait for user input to continue (as opposed to 5 sec
590                    delay), can be skipped with -y
591                    Various cleanups and code refactoring
592                    Update manual pages
593  Program fancontrol.init: New (Dean Takemori)
594  Program Restore fans on many kinds of errors/interrupts
595  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
596                           (Giuseppe Della Bianca)
597  Program Detect devfs and refuse to run
598                    Use mknod's mode instead of chmod
599  Program mkpatch: Include xeontemp and pc87360
600  Program sensors: Rework adm1025 support
601                   Display pc87365/pc87366 VID
602                   Improve smsc47m1 support
603                   Hide 2.6 adm1027 alarm_mask being missing
604                   Print VRM version for all supported chips
605  Program sensors-detect: Support LM93, LM77, LM63
606                          Support PC8739x Super-I/O family (no sensors)
607                          Fix PCA9540 support
608                          Refine ADM1025/ADM1025A detection
609                          Refine LM75 detection
610                          Ignore missing /proc/modules (Andras Bali)
611                          Script-wide Perl cleanups
612                          Support udev
613                          Support W83792D, LM96000
6162.8.7 (20040611)
617  File README.thinkpad: Update 24RF08 status
618  File doc/fan-divisors: More info on accuracy
619  File doc/lm_sensors-FAQ.texi: Update 4.27
620  File doc/chips/adm1031: New
621  File doc/chips/max1619: New
622  File doc/chips/pc87360-fan: Renamed to pc87360
623  File doc/chips/pc87360: Big update
624  File doc/chips/w83781d: Update AS99127F documentation
625  File etc/ Add comments about BP6 voltages
626                            Add comment on Asus A7V8X-X VCore
627                            Misc fixes to lm80 section
628                            Update via686a section
629                            New lm99 section
630                            Add section for LM85-like chips
631                            Preliminary pc87366 section
632                            Add comment on GL520SM application modes
633                            Document beep_enable (Aurelien Jarno)
634                            Preliminary max1619 section
635                            Preliminary adm1030 and adm1031 sections
636  Library: Fix 2.6 VRM
637           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
638           Fully support the PC87360 family
639           Support the lm99
640           Add version and date strings
641           Support 2.6 max1619
642  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
643  Man page i2cdetect.8: document new command line flags
644  Man page i2cdump.8: More details on how i2cdump can write to a chip
645  Modules (all chip drivers): Rework memory allocation scheme.
646  Module adm1031: New (Alexandre d'Alton)
647  Module bmcsensors: Fix oops by creating thread for initialization
648  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
649  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
650          asb100.c, lm92.c: Use swab16
651  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
652  Module gl520sm: Less agressive initialization process
653                  Fix temp1 limits being unsettable in application
654                  Ensure that temp2 and in4 are not used at the same time
655  Module i2c-i801: Support 6300ESB and ICH6
656  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
657  Module i2c-sis645: Add support for SiS655
658  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
659  Module lm90: Support LM99 and LM89
660  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
661               Get rid of useless i2c_probe call
662  Module max1619: New (Alexey Fisher)
663  Module p4b_smbus: Add support for mobile versions of the 82801
664                    (Axel Thimm)
665  Module pc87360-fan: Renamed to pc87360
666  Module pc87360: Also support PC87365 and PC87366
667                  Add write support
668                  Correctly set the chip name depending on the type
669                  Add voltage and temperature support
670                  Fix fan speed computation
671                  Retrieve fans configuration from Super-I/O space
672                  Export pwm_enable (read-only)
673                  Honor pwm invert bits
674                  Clear fan alarms after we read them
675                  Do not read fan data when monitoring is disabled
676                  Do not include SENSORS_INSMOD stuff
677                  New module parameter: init
678                  Fan clock dividers change automatically
679                  Add thermistor dupport
680  Module smsc47m1: Lock on reads and writes
681                   Various PWM fixes
682  Module thmc50: Fix address range
683  Module via686a: Fix voltage roundings
684                  Simplify temperature conversions
685  Module w83781d: Drop PWM support for as99127f
686                  Invert AS99127F beep bits in driver rather than user-space
687  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
688  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
689  Program New
690  Program i2cdetect: Adapt probing method to address
691                     Add -q and -r flags to force probing methods
692                     Allow probing range selection
693  Program isadump: Major improvements
694  Program isaset: New
695  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
696                   module
697                   Include i2c-nforce2
698  Program sensord: New --rrd-no-average parameter
699                   Syncronize time slots with rrd
700                   Fix W83781D temp3 alarm (Aurelien Jarno)
701                   Add ASB100 support (Andrew May)
702  Program sensors: Fully support the PC87360 family
703                   Fix lm80 temperature alarms
704                   Support the lm99
705                   Do not invert AS99127F beep bits anymore
706                   Fix W83781D temp3 alarm (Aurelien Jarno)
707                   Print library version string
708  Program sensors-detect: Rework Super I/O detection
709                          Support SiS655/SiS96x
710                          Support ADT7461 and ADT7467
711                          Better support for ADM1027, ADT7460 and ADT7463
712                          Explicitly support ADM1028
713                          Scan all logical devices of PC87365 and PC87366
714                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
715                          Detect eeproms with software write protect (not
716                          enabled by default)
717                          Support ALi 1563 (2.6 only)
718                          Drop LTC1710 support
719                          Use byte reads for probing on ranges 0x30-0x37 and
720                          0x50-0x5F
721                          Improve LM89 and LM99 support
722                          Support GeForce FX 5900 video cards
723                          Fix devfs misdetection (Aurelien Jarno)
724                          Detect 6300ESB, ICH6
725                          Fix double detection of ISA chips
726                          Support MAX1619
727                          Support PC87373 Super-I/O
728                          Fix unknown adapters appearing multiple times
729                          Refine MAX6650/MAX6651 detection
7322.8.6 (20040405)
733  File README.thinkpad: Update status
734  File doc/chips/pca9540: New
735  File doc/chips/pc87360-fan: New
736  File etc/ Update pcf8591 default configuration
737  Library: Switch to new sysfs naming standard
738           Fix gcc 3.3 warnings (Philipp Thomas)
739           Support 2.6 ds1621 and pcf8591
740           Change pcf8591 magnitudes
741           Support pc87360-fan
742  Makefile: Install shared library 755
743  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
744  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
745  Modules ds1621, pcf8591: Check for capabilities before using them
746                           (Aurelien Jarno)
747  Modules pcf8574, pcf8591: Cleanups
748  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
749  Module adm1021: Better detection and initialization
750  Module pca9540: New driver for the Philips PCA9540
751  Module pc87360-fan: New driver for the National Semiconductor PC87360,
752                      PC87363 and PC87364 Super I/O chips
753  Module smsc47m1: Support the LPC47B27x
754  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
755  Program i2cdetect: Skip special addresses by default
756  Program sensord: Prevent null pointer dereference (Tim Toohey)
757  Program sensors: Print the degree symbol in the terminal's current locale
758                   (Aurelien Jarno)
759                   Update pcf8591 print to support 2.6 driver
760                   Support pc87360-fan
761  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
762                          Improved SiS chips support
763                          Add a white list of IBM systems
764                          Drop support of undetectable adapters
765                          Fix smart battery detection
766                          Add smart battery charger and manager detection
767                          Rework adm1021 and clones detection
768                          The PC87360, PC87363 and PC87364 Super I/O chips
769                          now have a (preliminary) driver
770                          Rework Super I/O detection
771                          Better support of devfs
772  Program New
7752.8.5 (20040305)
776  File doc/chips/SUMMARY: Update
777  File etc/ Epox 8K3A tweaks. (Kronos)
778  Makefiles hotplug and rrd: Remove -o and -g arguments to install
779  Module bmcsensors: Increase max SDRs to 100
780  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
781  Module i2c-amd756: Don't register driver to avoid driver conflicts.
782                     (Daniel Rune Jensen)
783  Module it87: Better temperature sensor types handling (Takeru Komoriya)
784               Fix reset=1 (Takeru Komoriya)
785  Module lm80: Code cleanups
786  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
787  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
788  Module w83627hf: Add w83637hf support
789                   Fix exported name
790                   Fix PWM in w83627thf
791                   Preserve other bits when forcing temp2/3 to comparator mode
792  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
793                  Remove asb100 support
794  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
795          Define driver ID if i2c-id.h doesn't have it yet.
796  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
797          Backport oops fix from Linux 2.6.
798  Modules (all chips): Get rid of useless headers
799  Program Add sysfs support
800  Program sensors: Add w83637hf support
801                   Add support for Shuttle Ethernet EEPROMs
802                   Drop 2.6 subclient detection
803  Program sensors-detect: Add heuristics to the LM80 detection function
804                          Add support for W83L785R, improve W83L784R/AR
805                          Add GeForce FX 5600 as supported by rivatv
806                          More Super IO chips, better handling
807  Library: Update to match renames in fscher
808           Reverse temporary changes to w83l785ts mappings
809           Fix vt1211 and vt8231 uch_config not being writable
810           Add 2.6 lm80 support
811           Add w83637hf support
812           Remove in6 and temp1 from vt1211 and vt8231
813           Add support for Shuttle Ethernet EEPROMs
814           Remove unused as99127f features
8172.8.4 (20040207)
818  File doc/lm_sensors-FAQ.texi: Update 4.20.
819  File doc/chips/it87: Change hyst to low
820  File doc/chips/w83l785ts: New
821  File etc/ Change it87 hyst to low
822                            Fix w83697hf supposed to have temp3
823                            Limits initialization for adm1025/ne1619
824                            Handle fscher voltage conversions
825                            Add Tyan Trinity S2495 KT400 setup (Eric
826                              Schumann)
827                            Fix fscher fan labels (Reinhard Nissl)
828  Library: Better 2.6 eeprom support
829           Change it87 hyst to low
830           Add 2.6 gl518sm, fscher support
831           Fix 2.6 negative voltages handling
832           Temporary fix to w83l785ts mappings
833  Module adm1025: Separate prefix for NE1619
834  Module adm1026: Remove use of temporary ID
835                  Define addresses as a range
836  Module bmcsensors: Fix reservations
837  Module fscher: Externalize voltage conversions
838  Module eeprom: Remove memtype
839  Module i2c-piix4: Fix resource release error
840                    Various cleanups
841  Program Add sysfs support
842  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
843                   Drop linux 2.2 support
844                   Add w83627hf
845  Program sensors: Do not show algorithm by default
846                   Cleanup temperature unit display code
847                   Cleanup label spacing code
848                   Fix output to UTF-8 terms (Marcel Sebek)
849                   Simplify gl518sm print
850                   Do not ignore errors in FSC chips prints
851                   Fix w83l785ts print
852                   Cleanup FSC chips prints
853  Program sensors-detect: Fix PATH issues
854                          Correctly point to the fscher driver
8572.8.3 (20040115)
858  File lm_sensors.spec: Update
859  Library: Add 2.6 eeprom, lm90 support
860           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
861  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
862  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
863  Module i2c-amd756: Fix byte writes
864  Module i2c-tsunami: Cleanups (Daniel Nilsson)
865  Module it87: Fix sg_tlx writes; fix sensor type reporting;
866               add 8712 Super I/O detection;
867               remove initialization of temp_type and fan_ctl;
868               remove init and temp_type module parameters
869  Module lm90: Handle hysteresis differently
870  Module smartbatt: Fix detection, magnitudes, temp
871  Module w83781d: Fix negative voltages
872  Module w83l785ts: New
873  Program eeprog: Make 8 bit mode the default
874  Program fancontrol: Improvements, fixes, support 2.6 kernels
875  Program mkpatch: Add lm75.h
876  Program pwmconfig: Improvements, fixes, support 2.6 kernels
877  Program sensors: Add ASB100 support
878  Program sensors-detect: Add 8712 Super I/O detection;
879                          add W83L785TS detection
8822.8.2 (20031211)
883  IMPORTANT: Limit initialization removed from all chip drivers!
884             If you didn't run 'sensors -s' in the past you may need to now!
885  File Change lm75 scaling back to 1;
886                        Add example for asb100
887  Library: Fix bmcsensors scaling, increase number of sensors;
888           Add w83627thf support; Advance version to 3.0.0;
889           Add hermes, ADM1032, ASB100 support;
890           Add it87 sensor type support;
891           Add sysfs support for kernel 2.6;
892           Fix memory leaks
893  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
894             Fail if no kernel .config file exists;
895             Don't build module dependencies for user and user_install
896  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
897          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
898          smsc47m1, thmc50, via686a, w83627hf, w83781d:
899          Remove initialization of limits by driver.
900  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
901  Modules (chip): Init cleanups
902  Module asb100: New
903  Module bmcsensors: Fix voltage scaling, voltage and fan limits
904  Modules ddcmon, eeprom: Add failure printks
905  Module fscher: New (Fujitsu-Siemens Hermes driver)
906  Module i2c-amd756: Fix AMD8111 support
907  Module i2c-amd8111: Fix byte writes
908  Module i2c-nforce2: Fix byte writes
909  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
910  Module i2c-sis630: Sync with 2.6.0-X driver version
911  Module i2c-viapro: Add support for Via 8237
912  Module it87: Add pwm and "smart guardian" support;
913               add it87 sensor type support
914  Module lm75: Fix negative voltages
915  Module lm90: Add ADM1032 support
916  Module w83781d: Fix 791d and 627hf detection
917  Module w83627hf: Add VID support
918  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
919  Program eeprog: New
920  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
921                                       support sysfs for i2c bus search
922  Program i2cdetect: Add -l option to list busses
923  Program i2cdump: Add 'c' mode for consective address reads
924  Program mkpatch: Cleanups
925  Program pwmconfig: Handle multiple fans controlled by a single pwm
926  Program sensord: Remove ddcmon support
927  Program sensors: Add ADM1032 support; add messages for sysfs
928  Program sensors-detect: Prefer Super I/O drivers;
929                          Fix W83627HF and W83791D detection; detect CSB6;
930                          Detect ADM1029, ADM1030, ADM1031;
931                          Detect W83637HF, W83697UF;
932                          Add it87 sensor type support; add sysfs support
933                          Reduce lm80 misdetects; remove PCFxxxx "detection"
934                          Detect VT8237 (KT600)
935                          Use VPD instead of DMI+ACPI for Thinkpad detection
936                          Suggest new asb100 driver instead of w83781d
9392.8.1 (20031005)
940  NOTE: Requires i2c-2.8.1 or newer!
941  File Improved adm1025 section
942                        Default temp labels for as99127f
943                        Improved lm83 section
944                        Better support for Asus A7V8X-X
945  File doc/chips/SUMMARY: Add SMSC manufacturer ID
946  File doc/chips/adm1025: Add decent documentation (almost new)
947  File doc/chips/lm83: Known motherboards list update, misc updates
948  Library: Change adm1025 names (hyst/over become low/high)
949           Swap adm1025 temp1 and temp2 to match the driver's order
950           Advance version to 2.0.1
951           Update lm83 support
952           Add support for lm90, xeontemp, max6650
953           Add separate messages for read and write errors
954           Add missing message for parse error
956  Modules (various): Fix includes for compilation on Alpha
957                     Use the new i2c_delay function instead of the various
958                     do_pause functions
959  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
960  Module i2c-nforce2: Cleanups
961  Module i2c-i810: Use readl/writel for portable access to PCI memory
962  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
963  Module i2c-savage4: Use readl/writel for portable access to PCI memory
964  Module i2c-sis630: Fix detection
965                     Add block data read/write support
966  Module i2c-sis645: Detection method change/bugfix
967  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
968  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
969  Module adm1025: Major driver update
970                  Add support for Philips NE1619
971                  Simplify the driver a lot (unified voltages, unified
972                  temperatures and much more)
973                  Fix default voltage limits
974                  Change default temperature limits
975                  Swap remote and local temperatures to match the internal
976                  registers order (make the code unification possible)
977                  Export remote diode fault through alarms
978  Module ddcmon: Major update
979                 Add half a dozen new features
980                 Add checksum parameter (same as for the eeprom module)
981                 Fix monitor limits
982  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
983  Module lm78: Fix a fan_div/fan_min bug
984  Module lm83: Add t_crit and alarms support
985  Module lm90: New
986  Module max6650: New
987  Module saa1064: New
988  Module smsc47m1: Add support for 47M142
989  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
990                   enhance w83627thf support
991  Module w83781d: Enhance chip detection; clean up error returns;
992                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
993  Module xeontemp: New
994  Program Add Direct Rambus (DRDRAM)
995                           Mark Rambus as unsupported
996  Program New
997                          Interfaces between our eeprom module and
998                          parse-edid from the read-edid project
999  Program p4b_smbus: Fix SMP compilation
1000  Program sensord: Add support for IT87 (Mike Black)
1001                   Change ADM1025 support to match the changes made to
1002                   the library
1003  Program sensors: Rewrite and enhance EEPROM support
1004                   Change LM83 and ADM1025 support to match the changes
1005                   made to the library
1006                   Add DRDRAM support to print_eeprom
1007                   Exit(1) on /proc write failure (Malte Starostik)
1008                   Add LM90, MAX6650 support
1009  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1010                          Add support for LM82, LM86, LM89
1011                          Improved W83781D family detection
1012                          Add support for AS19927F rev.2, ASB100 Bach
1013                          Add support for Asus Mozart-2 (3 types)
1014                          Add support for NE1619
1015                          Add support for FSC Hermes
1016                          Make sure /sbin is in the user's path
1017                          Fix EEPROM detection
1018                          Automatic module.conf and /dev/i2c* detection
1019                          Improve LM82 and LM83 detection
1020                          Handle "to-be-written" cleanly
1021                          Add detection for 47M14x Super I/O
1022                          Handle the one-address-many-chips-same-driver
1023                          case
10262.8.0 (20030714)
1027  NOTE: Requires i2c-2.8.0 or newer!!!
1028  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1029                  2.4.13 or later required for mkpatch.
1030  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1031                  i2c package
1032  File doc/chips/fscscy: Add watchdog documentation
1033  File Fix vt1211/vt8231 thermistor calculations
1034  File sensors.h: Now automatically generated
1035  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1036           add adm1026, lm83, lm85, w83791d support;
1037           Advance version to 2.0.0
1038  Makefiles: Generate warnings if new library won't be found by;
1039             Modules now install in kernel/drivers/i2c/[busses,chips];
1040             Ensure that headers in /usr/local/include are used first;
1041             Don't use /usr/include headers for modules;
1042             Handle multiple UTS_RELEASE definitions in linux/version.h;
1043             Automatically generate kernel/include/sensors.h;
1044             Remove old gzipped modules; remove old misc directory if empty;
1045             Remove pre-2.4 installation method;
1046             -Wall now the default;
1047             Add new targets user, user_install, and help;
1048             Run depmod after module installation
1049  Modules (all): Cleanups including
1050                - Add #include <i2c-proc.h>
1051                - C99 initializers
1052                - Remove #ifdef MODULE
1053                - Remove #ifndef THIS_MODULE
1054                - Remove #ifndef MODULE_LICENSE
1055                - Remove other 2.1/2.2 #ifdefs
1056                - Remove #include "sensors.h", copy SYSCTL defs to module
1057                - Remove excess #includes
1058                - Remove argument in i2c_register_entry()
1059                - Remove dummy xxx_command() definition
1060                - Remove EXPORT_NO_SYMBOLS
1061                - Remove init_MUTEX #define
1062                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1063                  no longer adjust their own refcounts
1064                - Use module_init() and module_exit()
1065                - Update to new i2c_driver struct definition
1066  Modules (bus PCI): Convert to PCI-module-style initialization
1067  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1068  Module adm1021: Set alarm on failed reads and report old value;
1069                  merge changes from kernel 2.5.54
1070  Module adm1026: New
1071  Module bmcsensors: Fix compile when DEBUG=1
1072  Modules ddcmon, eeprom: Use i2c block reads if possible;
1073                          better error handling
1074  Module ds1307: Add to Makefile
1075  Module gl520sm: Fix temperature over/hyst writes
1076  Module lm75: merge changes from kernel 2.5.54
1077  Module lm83: New
1078  Module lm85: New
1079  Module i2c-ali1535: Check for invalid transaction
1080  Module i2c-ali15x3: Check for invalid transaction
1081  Module i2c-amd756: merge changes from kernel 2.5.54;
1082                     check for invalid transaction
1083  Module i2c-amd8111: merge changes from kernel 2.5.54
1084  Module i2c-i801: Add support for 82801EB (ICH5)
1085  Module i2c-i810: Fix for some chips
1086  Module i2c-nforce2: New
1087  Module i2c-piix4: Check for invalid transaction
1088  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1089  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1090        north bridges; SiS962 and SiS963 south bridges
1091  Module i2c-viapro: Check for invalid transaction
1092  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1093          pwm and pwm enable support; update docs
1094  Module smbus-arp: Check adapter for HW or SW PEC support;
1095                    add reset option
1096  Module w83781d: Add support for w83791d
1097  Module w83627hf: New
1098  Program Recognize DDR and Rambus
1099  Program eeprom: Fix writes for small eeproms
1100  Program eeprom, eepromer: Use local i2c-dev.h for build
1101  Program fancontrol: New
1102  Program lm_sensors.init: Call sensors -s in start()
1103  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1104                   Add adm1026,lm85 support;
1105                   Remove sensors.c file; add sensors_compat.h;
1106                   Remove patches to i2c-core.c and drivers/char/mem.c;
1107                   Now works only for kernels 2.4.13 or later
1108  Program p4b_smbus: Fix 'make install';
1109                     Install in same place as other modules;
1110                     Clear correct bits in config word
1111  Program pwmconfig: New
1112  Program sensors: add adm1026, lm85, w83791d support
1113  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1114                          w83627hf, w83627thf, w83697hf);
1115                          Add support for SiS651, SiS961, SiS745, SiS746;
1116                          Support dmidecode 2.0 and later;
1117                          Fix "C" format error;
1118                          Add support for adm1026, 82801EB (ICH5), W83791D;
1119                          Add support for w83l785ts, nForce2;
1120                          Fix UTF-8 incompatibility;
1121                          Better support for lm75;
1122                          Add support for lm83
11242.7.0 (20021208)
1125  NOTE: Requires i2c-2.7.0 or newer.
1126  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1127  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1128  File doc/busses/i2c-sis645: Add license
1129  File doc/chips/lm92: Add license, features
1130  File doc/chips/maxilife: Add license, parameters, features
1131  File doc/chips/smartbatt: Complete rewrite
1132  File doc/chips/vt8231: Add license, parameters
1133  File Add section for lm75; complete the lm78 section
1134  Library: Add support for MC1066; add multiple VRM version support for lm87;
1135           enhance adm1023 support; initial support for Sony Vaio eeprom;
1136           add support for bmcsensors; add hacks for additional dummy drivers
1137  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1138            add flags for x86_64 compiles
1139  Module adm1021: Add support for MC1066
1140  Module bmcsensors: New
1141  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1142                   kernel 2.5.43; fix 2.2 kernel compiles
1143  Module gl518sm: Iterate allowed only for rev 0x00
1144  Module i2c-amd756: Configure base address for nForce support;
1145                     check for uninitialized base address;
1146                     add support for amd8111 (SMBus 1.0)
1147  Module i2c-amd8111: New (SMBus 2.0)
1148  Module i2c-ipmb: New
1149  Module i2c-ipmi: New
1150  Module i2c-keywest: Sync with kernel 2.4.20
1151  Module i2c-sis630: Add support for SiS730
1152  Module i2c-sis645: Improve support for SiS645/961;
1153                     add support for SiS645DX/961 and SiS735;
1154                     fix 2.2 kernel compiles
1155  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1156  Module lm87: Add multiple VRM version support
1157  Module vt1211: Fix inx limits and alarms; fix in0
1158  Module vt8231: Fix inx limits and alarms; fix in0
1159  Module w83781d: Fix in0/in1 initialization
1160  Module smartbatt: New
1161  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1162  Program Code cleanup; valid HTML; better HTML output;
1163                           stop decoding on checksum error
1164  Program dmidecode: Fix read bug; upgrade to version 1.8
1165  Program doc-insmod: Complete rewrite; fix author output
1166  Program doc-features: Complete rewrite; handle missing sysctl entries;
1167                        handle unknown prefix with suggestion
1168  Program lm_sensors.init: Remove spaces bug; add green/red output
1169  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1170  Program rrd: Add sanity limits to newly-created RRD.
1171  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1172  Program sensors: Add support for MC1066, Rambus Rimms;
1173                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1174                   initial support for Sony Vaio eeprom
1175  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1176                          IPMI, AMD8111; add help if no sensors found;
1177                          add ACPI method for IBM system detection;
1178                          work with old Perl versions again;
1179                          initial support for Sony Vaio eeprom
11812.6.5 (20020915)
1182  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1183  File Fix temp[23] for as99127f; add vt8231
1184  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1185  Module dmi_scan: new
1186  Module ds1621: Fix enable/disable
1187  Module eeprom: Do not corrupt 24RF08's when checksum=1
1188  Module i2c-i801: Check for uninitialized base address;
1189                   enable if not enabled
1190  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1191  Module i2c-sis630: new
1192  Module i2c-sis645: new
1193  Module lm92: Fix in-kernel initialization
1194  Module via686a: Remove VT8231 support
1195  Module vt8231: new
1196  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1197  Program dmidecode: new
1198  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1199  Program mkpatch: Add entries for, lm92,
1200                   pcf8574, pcf8591, smsc47m1, vt1211;
1201                   add dmi_scan
1202  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1203  Program lm_sensors.init: fix stop()
1204  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1205                   add support for logging loadavg in RRD;
1206                   fix down-converting raw labels for RRD;
1207                   update chip support, still behind sensors
1208  Program sensors: Add /usr/local/etc to config file path;
1209                   fix -c and -u flags; add vt8231
1210  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1211                          refuse to run on IBM systems;
1212                          fix sysconfig module numbering;
1213                          change quick write to not corrupt 24RF08's
12152.6.4 (20020719)
1216  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1217  File doc/vid: New
1218  File include/sensors_vid.h: New
1219  File Add vt1211, smsc47m1
1220  Library: Add multiple VRM version support for adm1025, w83781d;
1221           fix 'flex scanner jammed' on some systems;
1222           add vt1211, smsc47m1, lm92;
1223           fix access mode checking
1224  Makefiles: For 2.4+ kernels, modules now install in
1225             kernel/drivers/[i2c,sensors] , not misc/ , and
1226             'make install' removes old versions in misc/ .
1227             Use $CFLAGS and $CPPFLAGS if defined.
1228  Module adm1025: Add multiple VID version support
1229  Module ds1307: new
1230  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1231                     reliability improvements
1232  Module i2c-hydra: Flush posted writes
1233  Module i2c-i801: Add support for 82801DB (ICH4)
1234  Module i2c-i810: Flush posted writes
1235  Module i2c-savage4: new
1236  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1237  Module i2c-voodoo3: Flush posted writes
1238  Module ds1307: New
1239  Module lm92: New
1240  Module smbus-arp: new
1241  Module smsc47m1: new
1242  Module via686a: Add support for VT8231 sensors
1243  Module vt1211: new
1244  Module w83781d: Add multiple VID version support; fix temp alarms
1245  Program eeprom: new
1246  Program i2cdump: Add smbus block command specification, add PEC support
1247  Program lm_sensors.init: new
1248  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1249                   pcf8574, pcf8591, smsc47m1, vt1211
1250  Program p4b_smbus: Add support for ICH4
1251  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1252  Program sensord.init: Renamed, was prog/init/sensors
1253  Program sensord: Major update, now requires rrd source;
1254                   not compiled by default
1255  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1256                   (don't display algo. and adap.) option;
1257                   add vt1211, smsc47m1, lm92
1258  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1259                          add 82801DB, LM85; fix perl warnings;
1260                          generate /etc/sysconfig/lm_sensors for
1261                          lm_sensors.init script
12632.6.3 (20020322)
1264  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1265  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1266  File doc/chips/it87: add more temp_type help
1267  File Un-ignore it87 in8, temp3, fan3;
1268                        add adm1021 section; add lm87 AIN[1,2] template;
1269                        swap negative voltage limits for 782d,783s,627hf,
1270                        697hf,it87; add more it87 help; swap neg. voltage
1271                        limits for lm78(-j), lm79, w83781d, as99127f
1272  Library: Add PCF8591, W83697HF, ADM1023 support;
1273           fix w83* fan_min computes;
1274           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1275  Module adm1024: Add MODULE_LICENSE("GPL")
1276  Module bt869: Add s-video out and DVD resolution support
1277  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1278  Module fscscy: implement min/max for voltages and fans
1279  Module i2c-amd756: Add support for AMD768
1280  Module i2c-i810: Add support for 810E
1281  Module i2c-keywest: Big update, sync with kernel 2.4.18
1282  Module i2c-piix4: Check for uninitialized base address
1283  Module i2c-sis5595: Blacklist 645, 735
1284  Module i2c-viapro: Check for uninitialized base address
1285  Module gl518sm: Standardize /proc entries in0-3
1286  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1287               fan -> fan1; fix temp2 limit writes
1288  Module pcf8574: Add support for PCF8574A; /proc interface changed
1289  Module pcf8591: new
1290  Module sis5595: Blacklist 645, 735
1291  Module w83781d: Add W83697HF support; allow force_subclients parameter
1292                  for Tyan 2460
1293  Programs, Update for new /proc names
1294  Program new
1295  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1296                   add text output
1297  Program init/sensors: New SysV init script
1298  Program Add support for fscscy, add more help entries
1299  Program p4b_smbus: new
1300  Program rrd: Install summ_week.cgi
1301  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1302                   clean up chassis intrusion prints
1303  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1304                          fix Via686a and it87 detection;
1305                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1306                          fix uninitialized values; it87 beats lm78
13082.6.2 (20011118)
1309  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1310  Chip Modules (all): malloc.h -> slab.h
1311  Modules (all): Add MODULE_LICENSE("GPL")
1312  File doc/FAQ: More updates and additions
1313  File Fix it87 in5,in6 (-12,-5) calculations
1314  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1315           update it87 alarm ID's.
1316  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1317  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1318  Module i2c-amd756: Improve busy handling/printk's
1319  Module i2c-i801: Add 82801CA/CAM support
1320  Module i2c-keywest: Sync with PPC people, it works now
1321  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1322  Module i2c-viapro: Add Via VT8233 support
1323  Module it87: Merge alarm_* /proc entries to alarms
1324  Module sis5595: Fix support for rev B0
1325  Module via686a: Make limit initializations reliable
1326  Module w83781d: Allow init=0 parameter to bypass initialization
1327  Program isadump: Add flat address space (PCI) support
1328  Program Add support for i2c-ali1535, adm1024, ds1621,
1329                      fscpos, it87, maxilife, mtp008
1330  Program sensors: Fix w83781d temp precision
1331  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1332                          Fujitsu Poseidon and Scylla,
1333                          Intel 82443MX and 82801CA/CAM detection,
1334                          add ITE 8172G detection (driver in kernel 2.4.10)
13362.6.1 (20010830)
1337  File BUGS: Updated
1338  File doc/FAQ: More updates and additions
1339  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1340  File Fix/enhance it87 section
1341  Library: ds1621 and it87 updates
1342  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1343  Module i2c-amd756: Add AMD 766 support
1344  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1345  Module i2c-piix4: Add Serverworks CSB5 support
1346  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1347  Module adm1025: Fixed temp2 min/max writes
1348  Module ds1621: Add 12-bit precision mode
1349  Module it87: Enable all alarms, add in8 support, add sensor type selection
1350  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1351                  remove support for module
1352  Module sis5595: Recognize unsupported chips and refuse to load
1353  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1354  Program eepromer: new
1355  Program Fix dependencies on i2c-proc; disallow compilation
1356                      of sensors.c as a module in kernel
1357  Program sensors: it87 updates; adjust temp. precision for some chips
1358  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1359                          recognize unsupported SiS chips;
1360                          recognize AMD 766 and Serverworks CSB5.
13622.6.0 (20010612)
1363  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1364        If your make fails because it can't find <linux/i2c-proc.h>, you
1365        forgot this step!!!
1366  File doc/FAQ: Many, many updates and additions
1367  File doc/busses/i2c-sis5595: new
1368  File doc/busses/i2c-tsunami: new
1369  File doc/chips/it87: new
1370  File doc/chips/via686a: Claim support for 686b.
1371  File README.thinkpad: new
1372  File Adjust as99127f in5 (-12V) and temp2 calculations;
1373                        Add lm87, adm9240, ds1780, lm81 templates;
1374                        Enhance help comments in file;
1375                        Add Tyan S2510 dual-MTP008 example;
1376                        Make separate sis5595 section.
1377  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1378  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1379  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1380           Add support for maxilife-nba and amd1024;
1381           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1382  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1383  Chip Modules (all): Change from sensors_* to i2c_* globals
1384                      for new i2c-proc.[ch]
1385  Makefiles: enhance to support Alpha architecture
1386  Module adm1021: Fix lm84 and gl523sm support
1387  Module adm1024: new
1388  Module i2c-i801: Chip detection cleanup
1389  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1390  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1391  Module i2c-tsunami: New
1392  Module i2c-via: Ensure i2c bus is tristated correctly.
1393  Module it87: new driver for IT8705, IT8712, Sis950 chips
1394  Module lm78: Recognize chipid=0x20
1395  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1396  Module mtp008: Fix temp initializations;
1397                 Save BIOS pin configuration of temps and fans;
1398                 Fix sensor type reads/writes and fan min writes;
1399                 Fix spurious invalid sensor type messages
1400  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1401                  used for patched kernel now.
1402                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1403  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1404                  Allow force_addr=0xaddr
1405  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1406  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1407                  reading changes; Add messages for subclient
1408                  registration failure
1409  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1410  Program i2cset: new
1411  Program isadump: fix for Alpha arch. compiles
1412  Program Fix adm9240 typos; Add more chips to;
1413                      Remove ltc1710; Fix i2c_sis5595 typo;
1414                      Support kernel 2.4.5 makefile change;
1415                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1416  Program sens_update_rrd: new
1417  Program sensord: Add -d (debug) and -p (pid-file) options
1418  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1419                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1420                   Change mtp008 temps from max/min to limit/hyst;
1421                   Add maxilife-nba, adm1024, it87 support.
1422  Program sensors-detect: Recognize lm78 with chipid=0x20;
1423                          Recognize SMSC Victory66 South Bridge;
1424                          Add devfs /dev/i2c/x support;
1425                          Add adm1024, it87xx support; Add thinkpad warning.
1426  Program tellerstats: new
14282.5.5 (20010115)
1429  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1430        you have kernel 2.4.0-prerelease or greater.
1431  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1432  File doc/developers/proc: new
1433  File Add mtp008 entries, adm1025 entries
1434  Library: Add ds1621, mtp008 support
1435  Module adm1021: Add support for adm1021a / adm1023
1436  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1437  Module adm1025: Add support for remote temp; rename /proc entries to
1438                  in[0-5] and temp[1-2]; fix negative temp readings
1439  Module adm9240: Rename /proc entries to in[0-5]
1440  Module ddcmon: allow force and force_ddcmon parameters
1441  Module ds1621: new
1442  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1443  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1444  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1445  Module lm87: cleanup, update voltage calculations
1446  Module mtp008: new
1447  Module pcf8574: change update time to 5 seconds
1448  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1449  Module w83781d: fix beep setting via /proc
1450  Programs editticket, readticket: new
1451  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
1452  Program more fixes; now adds many more modules
1453  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1454                   add adm1025 temp2; report temp limits correctly as
1455                   min/max or limit/hysteresis; print message if no
1456                   sensors are found. Removed false errors from lm87 reads.
1457  Program sensors-detect: Add ds1621, mtp008 detection;
1458                          add ServerWorks detection
14602.5.4 (20001012)
1461  Module i2c-viapro: Add support for Via 596B (0x3051)
1462  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1463  Program fixed infinite loop
1464  Program sensors-detect: Detect Via 596B (0x3051)
14662.5.3 (20001008)
1467  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1468  File useful_addresses.html: update
1469  Library: Add lm87 support
1470  Module pcf8574: new
1471  Module i2c-ali1535: new
1472  Module i2c-ali15x3: removed force #ifdef.
1473  Module i2c-i801: support Intel 82801BA (815E chipset)
1474  Module i2c-i801: add i2c block write support, fix smbus block bugs
1475                   (requires i2c 2.5.3 package)
1476  Module i2c-i810: support Intel 82815
1477  Module lm87: new
1478  Module sensors: Fix for kernel 2.4.0-test8
1479                  (remove copy_to_user_ret and put_user_ret)
1480  Module w83781d: limit fan divisors to 8 max. for as99127f
1481  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1482  Program i2cdump: Add smbus block read support
1483  Programs i2cdetect, i2cdump: Improve error reporting
1484  Program sensors: new switch -u (--unknown)
1485  Program sensors-detect: detect Intel 82801BA (815E chipset)
1486  Program sensors-detect: detect Intel 82815
1487  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1488  Program sensors-detect: detect National LM87
1489  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1490  Program sensors-detect: Improve error reporting
14922.5.2 (20000709)
1493  File Fix lm80 in8 calculation
1494  Module w83781d: W83783S no longer crashes on unloading
1495  Program sensors-detect: more robustness in case of unknown i2c adapters
1496  Program sensors-detect, libsensors: fix eeprom size reporting
1497  Program sensord: more flexibility, support for alarm scanning etc.
1498  Program sensors: support for ignore setting on sensor alarms.
1499  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
15012.5.1 (20000618)
1502  Library: Add adm1025 support
1503  Module adm1025: new
1504  Module ddcmon: Fixed bus scan which could hang SMBus
1505  Module i2c-keywest: new
1506  Module maxilife: Add support for Maxilife '99 (NBA)
1507  Module via686a: Enable sensors if not enabled by BIOS
1508  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1509  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1510  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1511  Module w83781d: Fis as99127f fan speed (was 66% too high)
1512  Module w83781d: Improve beep input checking
1513  Program i2cdump: Add Winbond-style bank selection
1514  Program isadump: Add Winbond-style bank selection
1515  Program sensors: Add adm1025 support.
1516  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1517  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1518  File Add Maxilife '99 entries
1519  File Remove some as99127f entries.
1520    Note: For as99127f, reinstall manually (make install
1521          won't reinstall it) or else 'sensors -s' will fail.
15232.5.0 (20000312)
1524  Dropped all kernel 2.0 and 2.1 compatibility
1525  Module i2c-i810: new
1526  Module ddcmon: new
1527  Module via686a: new
1528  Module i2c-amd756: fixed region request
1529  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1530  Module w83781d: Don't change pin settings at initialization;
1531                  also fix chip detection.
1532  Library: Support for ddcmon and via686a
1533  Program sensors-detect: Support for ddcmon and via686a
1534  Program sensors: Support for eeprom, ddcmon and via686a
15362.4.5 (20000116)
1537  Introduced DESTDIR installation prefix
1538  Module lm80: fixes, temperature now read and set correctly
1539  Module i2c-voodoo3: driver enhancements
1540  Module w83781d: fixes, AS99127 works much better now
1541  Library: New ignore keyword in config file
1542  Programs: Support for new ignore keyword
1543  Program sensors-detect: Support for MGA detections
15452.4.4 (19991201)
1546  Addition of the alpha release of AMD 756 SMBus host support.
1547  Many fixes and updates to the gl518sm driver
1548  Updates and fixes for device detection
15502.4.0 (19990920)
1551  Too much to list.
1552  i2c and smbus parts are split off to a separate i2c package.
1553  New drivers and other stuff.
15552.3.4 (19990616)
1556  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1557  All: Now compiles against kernel 2.0.x (again ;)
1558  Module gl518sm: some updates and refinements
15602.3.3 (19990603)
1561  All: Now compiles against kernel 2.3.x (x >= 1)
1562  Module i2c-voodoo3: Timing issue fixes
1563  Module bt869: Seems to be functional and relatively well tested
1564  Many modules were modified to be more compatible with the new
1565   Mutex structure in the new experimental kernels.
15672.3.2 (19990507)
1568  Module i2c-hydra: Now compiles on 2.0.x kernels
1569  Module i2c-lm75: Slightly better detection
1570  * New, but not compiled by default:
1571  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1572  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
15742.3.1 (19990501)
1575  All: Now compiles on PPC
1576  Module i2c-hydra: NEW
1577  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1578  Module w83781d: Removed deadlock (mutex was not initialized)
1579  Documentation: A few glitches removed
1580  Makefile: default module installation directory is now
1581            /lib/modules/current/extra/misc
1582  Program sensors-detect: PPC Hydra now detected
1583  Program sensors: Now prints complete GL518SM information
1584  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
15862.3.0 (19990422)
1587  All: Many, many changes and improvements
1588  All: Many small bugs and problems removed
1589  Modules: New insmod parameters
1590  Modules: Much improved chip detection
1591  Module maxilife: NEW
1592  Module adm1021: MAX1617A now also supported
1593  Module adm9240: DS1780 now also supported
1594  Module w83781d: W83782D and W83783S now also supported
1595  Program sensors-detect: NEW
1596  Library: All chips now supported
1597  Documentation: Very much improved
15992.2.2 (199903??)
1600  Just some minor updates and bug fixes.
16022.2.1 (19990218)
1603  All: Removed compile warnings
1604  Module i2c-dev: Small bug removed if DEBUG=1 was used
1605  Module sis5595: Now compiles for 2.0 kernels
1606  Module adm1021: Detection corrected
16082.2.0 (19990216)
1609  All: Set copyrights to include 1999
1610  All: Small bugfixes
1611  I2C: Upgraded to newest archive of Simon Vogl
1612  Module i2c-dev: NEW
1613  Module i2c-ali15x3: NEW
1614  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1615     directories, and somewhat improved
1616  Module sis5595: NEW
1617  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1618  Library: Support for new chip drivers, several small bugs fixed
1619  Library manual pages: NEW
1620  Program i2cdetect: Moved to detect directory
1621  Program NEW
1622  Program doc-features: NEW
1623  Program sensors: Added man-page
1624  Document BUGS: Added cdrom bug and kernel i2c conflict
16262.1.2 (19990116)
1627  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1628  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1629  Documentation in doc/kernel: NEW
16312.1.1 (19990107)
1632  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1633                     and older
1634  Module gl518sm.o: Miscelaneous bugs and problems solved
1635  Program isadump: NEW
16372.1.0 (19981230)
1638  Library: Completely NEW
1639  Program sensors: NEW
1640  Program grab_busses: NEW
1641  Program decode-dimms: More information
1642  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1643  Module w83781d.o: NEW
1644  Module lm80.o: NEW
1645  Module gl518sm.o: new procfile beep, several small updates
1646  Modules: Now use pin readings, no more scaling within the kernel (use the
1647           library instead)
16492.0.2 (19981214)
1650  Module eeprom.o: NEW
1651  Program decode-dimms: NEW
1652  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1653           2.1.58
1654  Modules: Somewhat less verbose on transfers
1655  Module lm78.o now recognizes and handles lm78-j and lm79
16572.0.1 (1998121?)
1658  Module gl518sm.o updates, to make it actually work
1659  Module lm75.o high/low-byte swapping write bug fixed
16612.0.0 (19981209)
1662  Initial release
Note: See TracBrowser for help on using the browser.