root/lm-sensors/trunk/CHANGES @ 4751

Revision 4751, 82.9 KB (checked in by khali, 7 years ago)

Fix the magnitude of temperature offsets in Linux 2.6.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
4SVN HEAD
5  Library: Fix a memory leak on error
6           Speed up sensors_get_ignored() a bit
7           Fix thmc50 support for Linux 2.6
8           Fix bmcsensors support for Linux 2.6
9           Fix lm93 VID support for Linux 2.6
10           Fix adm1024 support for Linux 2.6
11           Fix maxilife support for Linux 2.6
12           Fix magnitude of temperature offsets in Linux 2.6
13  Makefile: Fix kernel version detection (#2187)
14  Module fscher: Add missing read of control register (2.6 backport)
15  Module i2c-piix4: Add ATI SB700 and SB800 support (2.6 backport)
16  Module lm93: Fix an array overrun (2.6 backport)
17  Program sensors: Fix a memory leak on error (with -u)
18  Program sensors-detect: Don't probe i2c-isa as a regular i2c bus
19                          Add Winbond W83L786NR/NG/R/G detection
20                          Add Winbond W83L771W/G detection
21                          Add Intel Tolapai SMBus detection
22
23
242.10.4 (20070716)
25  File doc/vid: Update the sysfs paths, update the chip lists
26  File i2c-dev.h: Support I2C block reads with specified length
27  File sensors.conf.eg: Add a dme1737 section
28  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
29  Library: Clean up pwm symbol names translation
30           Add dme1737 support
31           Add applesmc support
32           Add abituguru3 support
33           Add f71882fg support
34           Add w83627ehf support (for Linux 2.4)
35           Add support for the w83627ehf VID function
36           Add support for the w83627ehf thermal sensor types
37           Add support for it87 fan4 and fan5
38  Man page sensors.conf.5: Update the chip statement section
39  Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
40  Module lm85: Fix setting the fan speed min limit to 0
41               Add support for the EMC6D102 extra resolution bits
42  Module thmc50: Fix the i2c address range
43  Module w83627ehf: New (2.6 backport)
44  Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
45  Program i2cdump: Use the new I2C block read function
46  Program isadump: Detect when address bit 7 is a busy flag
47                   Fix Super-I/O exit sequence for Winbond/Fintek chips
48  Program fancontrol: Use let for arithmetic evaluation
49                      No longer need awk and grep
50                      Limit calls to external programs (Linux 2.6 only)
51                      Check for configuration file validity
52                      Support optional min and max PWM values
53                      Better integration with init scripts
54                      Use linear control instead of quadratic
55  Program pwmconfig: Use smaller steps for low PWM values
56                     Support optional min and max PWM values
57  Program mkpatch: Include w83627ehf
58  Program rrd: Support non-i2c devices (hwmon class)
59               Add missing shell declarations
60               Update URI
61  Program sensors: Drop ddcmon and eeprom support
62                   Add dme1737 support
63                   Add applesmc support
64                   Add max6680 support
65                   Add abituguru3 support
66                   Add f71882fg support
67                   Fix alignment of alarm for one-limit temperatures
68                   Add w83627ehf support (for Linux 2.4)
69                   Add support for the w83627ehf VID function
70                   Add support for the w83627ehf thermal sensor types
71                   Add support for it87 fan4 and fan5
72                   Display the extra resolution bits of the emc6d102
73  Program sensors-detect: Stop Super-I/O probe after first family success
74                          Fix SMSC DME1737 detection
75                          Add /usr/sbin to the PATH (#2199)
76                          Add ATI SB700 detection
77                          Add Maxim MAX6680/MAX6681 detection
78                          Add IT8726F detection
79                          Fix IPMI support for 2.6 kernels
80                          Add detection for non-standard SMSC Super-I/Os
81                          No longer depend on i2cdetect
82                          Add SMSC SCH5317 detection
83                          Drop detection of most non-sensors I2C chips
84                          Fix ADM1022 detection
85                          Add detection of many SMSC Super-I/O chips
86                          Add Fintek F71806FG and F71862FG detection
87
88
892.10.3 (20070319)
90  Library: Do not skip i2c adapters with only a class device and no
91            physical device. This change is required to survive the
92            planned struct class_dev removal from future 2.6 kernels.
93           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
94           Recognize i2c-isa-based devices as such even after class_dev
95            is gone
96           Compile with -D_REENTRANT
97           Fix support of Linux 2.6's max6650 driver
98           Fix max1619 support
99  Man page i2cdetect.8: Scanning range can be restricted
100  Module bmcsensors: Fix debugging messages
101  Module i2c-ali1563: Improve the status messages (2.6 backport)
102                      Fix device initialization (2.6 backport)
103  Module i2c-amd8111: Cleanups (2.6 backport)
104                      Fix initialization race (2.6 backport)
105  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
106  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
107  Module i2c-viapro: Add CX700 support (2.6 backport)
108  Module smsc47m1: Add SMSC LPC47M292 support
109                   Get rid of a useless semaphore (2.6 backport)
110  Programs i2cdetect, i2cdump, isadump: Flush output in real time
111  Program i2cdump: Cleaner output in SMBus block read mode
112  Program fancontrol.pl: Fix pwmN_enable access (#2190)
113  Program sensors: Add smsc47m2 support (fans)
114                   Fix -A option (hide adapter name) on error
115  Program sensors-detect: Only probe relevant I2C addresses
116                          Drop ARP-capable device detection
117                          Add Maxim MAX6655/MAX6656 detection
118                           (Olexiy Avramchenko)
119                          Add Maxim MAX1668, MAX1805, MAX1989 detection
120                          Add VIA CX700 detection
121                          Drop legacy W83627HF ISA detection
122                          Don't bufferize stdout during probes
123                          Speed up the LM75 and LM77 detection
124                          Clean up the EEPROM detection
125                          Add Dallas DS75 detection
126                          Add SMSC LPC47M292 detection
127                          Add nVidia MCP61 and MCP65 detection
128                          Fix ADM1028 detection
129                          Add Nat. Semi. PC8347L Super-I/O detection
130                          Add SMSC SCH5504 Super-I/O detection (no sensors)
131                          Make the LM78 and W83781D detection safer
132
133
1342.10.2 (20070115)
135  RPM: Obsolete, removed
136  File doc/fan-divisors: Update
137  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
138  Library: Add support for the pc87247 driver (fans only)
139           Probe for busses before chips
140           Drop support for algorithm names
141           Add support for coretemp driver   
142           Major update/optimization of config-file scanner
143           Add config-file scanner regression tests
144           Add f71872f support
145           Add w83627dhg support (David Holl, #2157)
146           Get the i2c adapter names from classdev.name
147           Add adm1029 support (Corentin Labbe)
148  Man page i2cdetect.8: Describe the output convention
149  Man page sensors.1: Update (option -c) and clean up
150  Module bmcsensors: Fix several warnings
151                     Fix fragile structure initialization
152  Module i2c-i801: Add ICH9 support
153  Module p4b_smbus: Add support for the ICH5
154  Module f71805f: Fix the device address decoding (2.6 backport)
155  Module icspll: Delete. It was useless and dangerous.
156  Program decode-dimms.pl: Remove spaces at end of lines
157  Program eepromer: Fix loads of warnings
158  Program i2cdetect: Make the output clearer
159  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
160  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
161                            without need of recompilation.
162  Programs dump/*: More robust handling of user inputs
163  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
164                                  Add support for non-i2c drivers
165  Program fancontrol.pl: Disable debugging by default
166                         Add support for non-i2c drivers
167                         More tolerant config file parsing
168  Program sensord: Add pc87247 support (fans only)
169                   Add vt1211 support (#2150)
170                   Add w83627dhg support (David Holl, #2157)
171                   Add w83627ehf voltage support (Dave Platt)
172                   Add k8temp support (Dave Platt)
173  Program sensors: Add pc87247 support (fans only)
174                   Hide error on missing f71805f fan
175                   Handle option -c more efficiently
176                   Drop option -a (show algorithm names)
177                   Add f71872f support
178                   Add w83627dhg support (David Holl, #2157)
179                   Add adm1029 support (Corentin Labbe)
180                   Hide error on missing w83793 temp (Gong Jun)
181  Program sensors-detect: Add SMSC DME1737 detection
182                          Add Fintek F71882FG and EPoX EP1308 detection
183                          Add Intel Core thermal sensor detection
184                          Preallocate memory for I2C_FUNCS ioctl (#2138)
185                          Prevent misdetection of MAX6633/MAX6634/MAX6635
186                          Add Intel ICH9 detection
187                          Add Maxim MAX6648/MAX6692 detection
188                          Improve ADM1029 detection
189                          Add Andigilog chips detection
190                          Add Intel AMB FB-DIMM thermal sensor detection
191                          Add ATI SB600 detection
192
193
1942.10.1 (20060924)
195  File doc/developers/checklist renamed to dev/developers/release_checklist
196          with clarifications and updates for new SVN server.
197  File README.package: Delete.
198  File doc/busses/i2c-piix4: Update (2.6 backport)
199  File doc/developers/sysfs-interface: Update
200  File etc/sensors.conf.eg: Add an smsc47m192 section
201                            Comment out all set statements
202                            Add an it8716 section
203                            Add a w83793 section
204                            Adjust the vt1211 section to match the new driver
205                             interface
206  Library: Fix device scan when no i2c support is present
207           Add support for W83627EHF voltage inputs and alarms
208           Add support for the smsc47m192 driver
209           Fix all memory leaks (yeah!)
210           Fix no sensors being reported as an error
211           Add support for the IT8716F and IT8718F chips
212           Add support for the W83793 chip (Yuan Mu)
213           Map the 2.6 adm1026's fan8 to fan0
214           Missing sysfs busses and classes are not errors
215           Change vt1211 temp3-7 magnitude from 1 to 3
216  Makefile: Don't grep autoconf.h on user-space targets
217            Fix depmod on non-running kernel version
218            Remove empty include directories on make user_uninstall
219  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
220  Module i2c-amd756-s4882: Improve static semaphore initialization
221                           (2.6 backport)
222  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
223                   Add ICH8 support (2.6 backport)
224                   Fix block transaction poll loops (2.6 backport)
225                   Remove PCI function check (2.6 backport)
226                   Cleanups (2.6 backport)
227  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
228  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
229                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
230                    Drop the fix_hstcfg parameter (2.6 backport)
231  Module i2c-viapro: Fix compilation with kernels < 2.4.21
232                     Add VT8237A and VT8251
233  Module lm83: Add LM82 support (2.6 backport)
234  Module vt1211: The VT1211 has no in6
235                 Rework the voltage and temperature conversions and the
236                  temperature input order to match the Linux 2.6 driver
237  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
238                  Add specific alarm and beep defines for the W83791D
239  Module w83792d: Fix PWM range (2.6 backport)
240  Program decode-dimms.pl: Decode depending on the memory type
241                           Decode the manufacturing date to an ISO8601 date
242                           Add the memory size computation and provide brief
243                            timing characteritics for SDRAM/DDR/DDR2 memory
244                           Add memory size computation for Rambus memory
245                           Various output cleanups and fixes
246  Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
247  Program decode-vaio.pl: Detect and skip false positives
248  Program i2cdetect: Add a mode to print adapter functionalities
249  Program i2cdump: Restore bank after bank switching
250                   Add new mode W (read word on even register addresses)
251  Program mkpatch: Fix typo breaking f71805f
252                   Turn warnings on (-w), and fix them
253                   Print a usage message on missing command line parameters
254  Program pwmconfig: Use mktemp instead of tempfile
255  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
256                   Add smsc47m192 support
257                   Add abituguru support (Hans de Goede)
258                   Fix memory leak when printing an unknown chip
259                   Add it8716 and it8718 support
260                   Make each it87 fan and fan div optional
261                   Print missing w83791d values
262                   Add w83793 support (Yuan Mu)
263                   The adt7463 may not have in4 (#2119)
264                   Hide more vt1211 missing input errors
265                   Clearer error messages when no sensors found
266  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
267                          Add ATI IXP200/300/400 SMBus detection
268                          Prevent warning on 64-bit PCI addresses
269                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
270                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
271                           F75384S/M, F75387SG/RG and F81218D detection
272                          Add Winbond W83793R/G and W83627DHG detection
273                          Handle the W83791D driver difference between kernels
274                          Add nForce4 MCP04, MCP51 and MCP55 detection
275                          Add AMD Geode devices detection
276                          Add ITE IT8716F and IT8718F detection
277                          Add NatSemi/Winbond PC87427 detection
278                          Get driver information for busy addresses from
279                           sysfs (2.6 only)
280                          Drop the ISA IT87xxF detection
281                          Check i2c adapter functionalities before probing
282                          Add Intel ICH8 SMBus detection
283                          Add AMD K8 thermal sensors detection
284                          Simplify detection of SiS5595, VIA686 and VT8231
285                          Add Analog Devices ADM1033, ADM1034, ADT7462,
286                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
287                          Check for root user at startup
288                          Attempt to be slightly more user-friendly
289                          Add VT8237A and VT8251
290                          Remove detection of nVidia graphics adapters
291                          Use sysfs for PCI device enumeration
292                          Add generic PCI SMBus adapter detection
293                          Add generic Super-I/O logical device detection
294                          Add SMSC LPC47M172/182 detection
295
296
2972.10.0 (20060214)
298  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
299  File doc/busses/i2c-viapro: Update (2.6 backport)
300  File doc/chips/via686a: Update (2.6 backport)
301  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
302  File etc/sensors.conf.eg: Do not set vrm by default
303  File i2c-dev.h: Fix union i2c_smbus_data definition
304                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
305                  Add missing parentheses around macros
306                  Drop I2C_FUNC_SMBUS_EMUL
307                  Drop I2C_FUNC_SMBUS_*_PEC
308                  Drop I2C_SMBUS_*_PEC
309  File sensors_vid.h: Drop default VRM
310  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
311           This is intentional.  Use decode-dimms.pl if you still
312           need your memory SPD data.
313  Library: Big update to use libsysfs.  More TODO though.
314           Fix bus matching code for Linux 2.6 (Karsten Petersen)
315           Add f71805f, w83687thf support
316           Add platform drivers support
317           Fix sysctl warnings on x86_64
318           Restore vt1211 temp1
319  Makefile: Compile user-space programs with -Wundef
320  Module i2c-i801: Simplify the hardware PEC code
321                   Always set PEC mode explicitly before each transaction
322  Module i2c-i810: Documentation update, PCI IDs cleanup
323  Module i2c-keywest: Remove bus probing code (2.6 backport)
324  Module i2c-nforce2: Remove dead code (2.6 backport)
325                      Add the ID of the nForce4 MCP-04 (2.6 backport)
326  Module i2c-via: Remove dead code
327  Module i2c-viapro: Remove dead code
328                     Support I2C block read (2.6 backport)
329                     Code cleanups (2.6 backport)
330                     Improve debug register dump (2.6 backport)
331  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
332          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
333          i2c-sis645: Use pci_driver name to request I/O region; do
334                      not initialize i2c_adapter name to "unset" (2.6
335                      backport)
336  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
337                                              (2.6 backport)
338  Module adm9240: Cleanups (2.6 backport)
339  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
340  Module it87: Minor cleanups
341               Fix fan3_div setting bug (Anton V. Staaf)
342  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
343               Separate the register read function
344               Add PEC support for the ADM1032
345  Module via686a: Cleanups
346  Module w83627hf: Drop useless initialization step (2.6 backport)
347                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
348                   Fix alarms (Yuan Mu)
349                   Preserve fan min on fan div change (Yuan Mu)
350                   Properly handle W83627THF without VID (Yuan Mu)
351                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
352                   Add W83687THF support
353  Module w83781d: Drop W83697HF support (Grant Coady)
354  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
355                  Fix fan control mode (PWM/DC) reporting
356                  Fix fan div auto-adjust (Yuan Mu)
357                  Fix the subclient handling
358  Module w83l785ts: Minor cleanup (2.6 backport)
359  Module vt1211: Restore temp1
360  Modules vt1211, vt8231: Change default VRM to 9.1
361  Program decode-dimms.pl: Add lookup tables for manufacturer names
362                           Fix rounding error in PCxxxx speed computation
363                           Improve text output
364                           Improve speed under Linux 2.6
365                           Verify checksum before decoding anything
366                           Improve manufacturing location decoding
367                           Improve memory type detection
368                           Improve part number decoding
369  Program i2cdump: Drop now useless #ifdef tests
370                   Fix capability check for continuous byte mode
371  Program i2cget: New
372  Program i2cset: Add PEC support
373                  Fix argc check
374  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
375                                       Print the correct bus type if bus
376                                       functionality can be queried
377  Program isadump: Display the real addresses in flat mode
378  Program mkdev.sh: Silently skip already existing nodes
379  Program mkpatch: Include f71805f
380  Program sensord: Do not log algorithm names
381                   Drop EEPROM support (Aurelien Jarno)
382                   Add W83627EHF, F71805F/FG support
383                   Fix PC87365/PC87366 alarms
384  Program sensors: Drop free_the_label
385                   Fix compilation with uclibc (no iconv)
386                   Add f71805f, w83687thf support
387  Program sensors-detect: Drop algorithm names
388                          Do not rely on i2cdetect -l printing algo names
389                          Simplify adapter name matching mechanism
390                          New address for ADM1032, ADT7461
391                          Improve ADT7467, ADT7468 support
392                          Fix MAX6659 reported driver
393                          Add Fintek F71805F detection
394                          Add Analog Devices ADT7476 detection
395                          Add Intel 82845G detection
396                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
397                          Fix udev detection in some corner case
398                          Improve DS1621 detection
399                          Always prefer ISA access over SMBus access
400
401
4022.9.2 (20050906)
403  File doc/chips/*: Big update (2.6 backport)
404  Library: Drop ds1780-specific code (now use adm9240)
405           Fix memory leak in sensors_get_label()
406           Support /sys/class/hwmon (Linux 2.6.14+)
407           Limit stack usage in sensors_read_proc_chips()
408  Makefile: Detect 2.6+ kernels and check targets
409  Man page isaset.8: Fix typos
410  Module adm1031: Fix broken kfree() calls
411  Module i2c-ali1563: New (2.6 backport by Winbond)
412  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
413  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
414          w83627hf.c: Tag find function __init
415  Module lm93: Fix memory leak
416  Module smsc47m1: Fix PWM enable polarity on read
417  Modules w83627hf, w83781d: Allow setting fan divisor to 128
418  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
419                           Added DDR/DDR2 frequency reporting in convenient
420                           form of DDRxxx PCyyyy
421  Program i2cdump: Properly handle short i2c block reads
422  Program fancontrol.pl: Fix compile errors
423  Program mkpatch: Include i2c-ali1563
424                   Include w83792d
425  Program pwmconfig: Fix unsafe temporary file use
426  Program rrd: Support 2.6 kernels
427  Program sensord: Add support for w83637hf
428                   Support pc87360 (Henrik Brix Andersen)
429  Program sensors: Support the VAIO "VGN" prefix for eeprom
430  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
431                          Advertise the w83792d driver
432                          Improve IT8705F and IT8712F detection
433                          Merge LM82 and LM83 detection
434                          Add W83687THF detection
435
436
4372.9.1 (20050412)
438  File doc/busses/i2c-nforce2: Update
439  File doc/chips/it87: Update
440  File doc/chips/lm90: Update for adt7461
441  File doc/chips/mic74: New
442  File etc/sensors.conf.eg: New sections for lm92 and w83792d
443  Library: Add support for 2.6 fscpos driver (Stefan Ott)
444           Fix sis5595 in4 (Aurelien Jarno)
445           Add support for 2.6 gl520sm driver (Maarten Deprez)
446           Add support for 2.6 bmcsensors driver (Yani Ioannou)
447           Add support for w83792d (Chunhao Huang/Winbond)
448           Add support for 2.6 adt7461 (James Chapman)
449           Add support for 2.6 lm92
450           Add support for 2.6 vt1211
451           Add preliminary support for 2.6 w83627ehf
452  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
453            Use -fno-strict-aliasing on all architectures
454  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
455  Module bmcsensors: Fix compile error
456                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
457  Module ds1621: Fix detection (Aurelien Jarno)
458  Module eeprom: Discard SPD-centric checksum module parameter
459                 Cleanup detection function (backport from Linux 2.6)
460  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
461  Module i2c-i801: Temporarily disable broken I2C block read
462  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
463                   Gelato)
464  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
465  Module i2c-viapro: Prevent repeated resets
466  Module it87: Improve Super-I/O detection
467               Limit I2C address range
468               Support VID on the IT8712F
469  Module lm75: Only initialize CMP/INT bit
470  Module lm78: Fix bug with setting negative temperature limits
471  Module lm85: Properly differentiate between ADM1027 and ADT7463
472               Add EMC6D102 support
473  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
474               Add limited ADT7461 support
475  Module lm93: Fix IN10 (+5V) scaling
476  Module mic74: New
477  Module w83627hf: Support secondary Super-I/O address
478                   Enable temp2 and temp3 if they are disabled
479  Module w83781d: Revert AS99127F temp2 and temp3 computation change
480                  Skip final initialization step for AS99127F chips
481  Module w83792d: New (Chunhao Huang/Winbond)
482  Program ddcmon: New; user-space replacement for the ddcmon driver
483  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
484  Program isadump: Handle Super-I/O keys
485  Program lm_sensors.init: Cleanups (Axel Thimm)
486  Program mkdev.sh: Add basic command-line interface
487  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
488  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
489                     Don't complain about read-only enable files (lm85)
490                     Fix handling of alternate config file name
491  Program sensord: Fix erroneous error message (Aurelien Jarno)
492                   Support sis5595 in4 (Aurelien Jarno)
493                   Support w83627thf
494                   Support the separate it8712 prefix (Aurelien Jarno)
495  Program sensors: Display sis5595 in4 (Aurelien Jarno)
496                   No errors on missing pc87360 fans
497                   Add gl520sm support (Maarten Deprez)
498                   Improve vt1211 error/ignore handling (Michael Carland)
499                   Support w83792d, w83627ehf
500  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
501                          Improve IT8705F and IT8712F detection
502                          Improve udev detection
503                          Fix DS1621 detection
504                          Add W83627EHF detection
505                          Add ATI SMBus detection
506                          Add VT1211 alias detection
507                          Warn if chip modules not found
508                          Add i2c-ipmi to list if bmcsensors is on it
509                          Add PC87591 detection
510                          Search for correct udev db file name
511                          Add nForce3 250Gb and nForce4 detection
512
513
5142.9.0 (20041228)
515  NOTE: Requires i2c-2.9.0 or newer!
516  File README.thinkpad: Update
517  File doc/chips/it87: Cleanups
518  File doc/chips/lm63: New
519  File etc/sensors.conf.eg: Set via686a voltage limits
520  File kernel/chips/Module.mk: Resync module list with mkpatch
521  File kernel/include/sensors_compat.h: Define __devexit_p if missing
522                                        (kernels 2.4.16 and older)
523  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
524                             and dec_use removed in release 2.8.0
525  Modules (all chip drivers): Remove owner from i2c_driver; pass
526                              controlling_mod to i2c_register_entry() again
527  Module bmcsensors: Support function 1/x
528  Module i2c-amd756: Display the real bus name
529  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
530  Module i2c-i801: Support i2c block read (ICH5 and higher)
531                   Add PEC support for ICH6
532                   Add support for ICH7
533  Module i2c-ipmb: Remove from build since it doesn't work
534  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
535  Module icspll: Fix compilation
536  Module lm63: New driver for the National Semiconductor LM63
537  Module lm83: Use signed types for temperatures
538               Check limits on register writes
539  Module lm87: Round voltages properly
540               Retry on read errors (David Knierim)
541               Less agressive init (no reset)
542  Module lm90: Use signed types for temperatures
543               Check limits on register writes
544  Module lm93: Added module parameter for VID pin input thresholds.
545               Fix typo in dynamic VID alarms
546               Adds a couple log messages for failed transactions (David
547               Knierim)
548               Fix compilation breaking C99-ism (Axel Thimm)
549               Fix block read retries
550  Module pc87360: Support secondary Super-I/O address
551  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
552  Library: Add lm63 support
553           Add lpc47b397 support
554  Programs *.init: Rename lockfile to match file name
555  Programs i2cset, isaset: Written byte/word can be masked
556  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
557  Program mkpatch: Include i2c-amd756-s4882
558  Program pwmconfig: Handle new (well, back to old) pwm files names for
559                     Linux 2.6.10 and up
560  Program sensord: Do not scale load average (Aurelien Jarno)
561  Program sensors: Add lm63, lpc47b397 support
562                   Support DDR2 memory module EEPROMs (Rudolf Marek)
563                   Support only one location for the default configuration file
564                   Display the default configuration file location in --help
565                   Simplify the configuration file opening code
566  Program sensors-detect: Improve LM63 detection
567                          Discard IBM Thinkpad detection code
568                          Add PCA9556, LPC47B397, ICH7 detection
569                          Fix W83792D detection, add W83791SD detection
570
571
5722.8.8 (20041007)
573  File doc/donations: Update
574  File doc/lm_sensors-FAQ.texi: Add 4.6.1
575                                Update 4.7
576  File doc/chips/gl518sm: Update "iterate" info
577  File doc/chips/it87: Discard outdated module parameters
578  File doc/chips/lm75: LM77 is not supported
579  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
580  File doc/chips/lm93: New
581  File doc/chips/w83l785ts: Improvements
582  File etc/sensors.conf.eg: Fix it87 lines order
583                            Update lm87 section
584  File kernel/include/sensors_vid.h: Support VRM 10.0
585  Library: Support 2.6 adm1025
586           Preliminary support for 2.6 lm87
587           Support 2.6 adm9240
588           Allow an alternative sysfs file name for chip features (2.6)
589           Fix lm83 critical limits (2.6)
590           Add lm93 support
591           Prevent some procfs errors from being silently ignored
592  Makefiles: Implement user_uninstall (Rudolf Marek)
593             Spoof LOGNAME and HOSTNAME when making html man pages
594  Module adm1025: Refine detection
595                  Update limit registers again (revert of 2.8.1)
596                  Init high limits if they read 0
597                  Fix conversions
598  Module lm75: Refine detection
599  Module lm78: Fix init
600  Module lm83: Default to kind lm83 if forced.
601               Fix temperature macros.
602  Module lm90: Add LM86, MAX6657 and MAX6658 support
603  Module lm93: New
604  Module mtp008: Fix the setting of limits on temp2
605  Module pca9540: Refine detection
606  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
607                  Support VID
608                  Fix fan_div file when fan count is less than 3
609                  Additional init and debug
610  Module smsc47m1: Fix pwm_enable being inverted
611  Module w83627hf: Add alternate VCORE/in0 calculation method
612                   Remove reset of chip by driver on initialization
613  Module w83781d: Fix default VRM for w83791d
614  Module w83l785ts: Implement read error handling (backport from 2.6)
615  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
616                    Wait for user input to continue (as opposed to 5 sec
617                    delay), can be skipped with -y
618                    Various cleanups and code refactoring
619                    Update manual pages
620  Program fancontrol.init: New (Dean Takemori)
621  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
622  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
623                           (Giuseppe Della Bianca)
624  Program mkdev.sh: Detect devfs and refuse to run
625                    Use mknod's mode instead of chmod
626  Program mkpatch: Include xeontemp and pc87360
627  Program sensors: Rework adm1025 support
628                   Display pc87365/pc87366 VID
629                   Improve smsc47m1 support
630                   Hide 2.6 adm1027 alarm_mask being missing
631                   Print VRM version for all supported chips
632  Program sensors-detect: Support LM93, LM77, LM63
633                          Support PC8739x Super-I/O family (no sensors)
634                          Fix PCA9540 support
635                          Refine ADM1025/ADM1025A detection
636                          Refine LM75 detection
637                          Ignore missing /proc/modules (Andras Bali)
638                          Script-wide Perl cleanups
639                          Support udev
640                          Support W83792D, LM96000
641
642
6432.8.7 (20040611)
644  File README.thinkpad: Update 24RF08 status
645  File doc/fan-divisors: More info on accuracy
646  File doc/lm_sensors-FAQ.texi: Update 4.27
647  File doc/chips/adm1031: New
648  File doc/chips/max1619: New
649  File doc/chips/pc87360-fan: Renamed to pc87360
650  File doc/chips/pc87360: Big update
651  File doc/chips/w83781d: Update AS99127F documentation
652  File etc/sensors.conf.eg: Add comments about BP6 voltages
653                            Add comment on Asus A7V8X-X VCore
654                            Misc fixes to lm80 section
655                            Update via686a section
656                            New lm99 section
657                            Add section for LM85-like chips
658                            Preliminary pc87366 section
659                            Add comment on GL520SM application modes
660                            Document beep_enable (Aurelien Jarno)
661                            Preliminary max1619 section
662                            Preliminary adm1030 and adm1031 sections
663  Library: Fix 2.6 VRM
664           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
665           Fully support the PC87360 family
666           Support the lm99
667           Add version and date strings
668           Support 2.6 max1619
669  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
670  Man page i2cdetect.8: document new command line flags
671  Man page i2cdump.8: More details on how i2cdump can write to a chip
672  Modules (all chip drivers): Rework memory allocation scheme.
673  Module adm1031: New (Alexandre d'Alton)
674  Module bmcsensors: Fix oops by creating thread for initialization
675  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
676  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
677          asb100.c, lm92.c: Use swab16
678  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
679  Module gl520sm: Less agressive initialization process
680                  Fix temp1 limits being unsettable in application
681                  Ensure that temp2 and in4 are not used at the same time
682  Module i2c-i801: Support 6300ESB and ICH6
683  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
684  Module i2c-sis645: Add support for SiS655
685  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
686  Module lm90: Support LM99 and LM89
687  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
688               Get rid of useless i2c_probe call
689  Module max1619: New (Alexey Fisher)
690  Module p4b_smbus: Add support for mobile versions of the 82801
691                    (Axel Thimm)
692  Module pc87360-fan: Renamed to pc87360
693  Module pc87360: Also support PC87365 and PC87366
694                  Add write support
695                  Correctly set the chip name depending on the type
696                  Add voltage and temperature support
697                  Fix fan speed computation
698                  Retrieve fans configuration from Super-I/O space
699                  Export pwm_enable (read-only)
700                  Honor pwm invert bits
701                  Clear fan alarms after we read them
702                  Do not read fan data when monitoring is disabled
703                  Do not include SENSORS_INSMOD stuff
704                  New module parameter: init
705                  Fan clock dividers change automatically
706                  Add thermistor dupport
707  Module smsc47m1: Lock on reads and writes
708                   Various PWM fixes
709  Module thmc50: Fix address range
710  Module via686a: Fix voltage roundings
711                  Simplify temperature conversions
712  Module w83781d: Drop PWM support for as99127f
713                  Invert AS99127F beep bits in driver rather than user-space
714  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
715  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
716  Program fancontrol.pl: New
717  Program i2cdetect: Adapt probing method to address
718                     Add -q and -r flags to force probing methods
719                     Allow probing range selection
720  Program isadump: Major improvements
721  Program isaset: New
722  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
723                   module
724                   Include i2c-nforce2
725  Program sensord: New --rrd-no-average parameter
726                   Syncronize time slots with rrd
727                   Fix W83781D temp3 alarm (Aurelien Jarno)
728                   Add ASB100 support (Andrew May)
729  Program sensors: Fully support the PC87360 family
730                   Fix lm80 temperature alarms
731                   Support the lm99
732                   Do not invert AS99127F beep bits anymore
733                   Fix W83781D temp3 alarm (Aurelien Jarno)
734                   Print library version string
735  Program sensors-detect: Rework Super I/O detection
736                          Support SiS655/SiS96x
737                          Support ADT7461 and ADT7467
738                          Better support for ADM1027, ADT7460 and ADT7463
739                          Explicitly support ADM1028
740                          Scan all logical devices of PC87365 and PC87366
741                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
742                          Detect eeproms with software write protect (not
743                          enabled by default)
744                          Support ALi 1563 (2.6 only)
745                          Drop LTC1710 support
746                          Use byte reads for probing on ranges 0x30-0x37 and
747                          0x50-0x5F
748                          Improve LM89 and LM99 support
749                          Support GeForce FX 5900 video cards
750                          Fix devfs misdetection (Aurelien Jarno)
751                          Detect 6300ESB, ICH6
752                          Fix double detection of ISA chips
753                          Support MAX1619
754                          Support PC87373 Super-I/O
755                          Fix unknown adapters appearing multiple times
756                          Refine MAX6650/MAX6651 detection
757
758
7592.8.6 (20040405)
760  File README.thinkpad: Update status
761  File doc/chips/pca9540: New
762  File doc/chips/pc87360-fan: New
763  File etc/sensors.conf.eg: Update pcf8591 default configuration
764  Library: Switch to new sysfs naming standard
765           Fix gcc 3.3 warnings (Philipp Thomas)
766           Support 2.6 ds1621 and pcf8591
767           Change pcf8591 magnitudes
768           Support pc87360-fan
769  Makefile: Install shared library 755
770  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
771  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
772  Modules ds1621, pcf8591: Check for capabilities before using them
773                           (Aurelien Jarno)
774  Modules pcf8574, pcf8591: Cleanups
775  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
776  Module adm1021: Better detection and initialization
777  Module pca9540: New driver for the Philips PCA9540
778  Module pc87360-fan: New driver for the National Semiconductor PC87360,
779                      PC87363 and PC87364 Super I/O chips
780  Module smsc47m1: Support the LPC47B27x
781  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
782  Program i2cdetect: Skip special addresses by default
783  Program sensord: Prevent null pointer dereference (Tim Toohey)
784  Program sensors: Print the degree symbol in the terminal's current locale
785                   (Aurelien Jarno)
786                   Update pcf8591 print to support 2.6 driver
787                   Support pc87360-fan
788  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
789                          Improved SiS chips support
790                          Add a white list of IBM systems
791                          Drop support of undetectable adapters
792                          Fix smart battery detection
793                          Add smart battery charger and manager detection
794                          Rework adm1021 and clones detection
795                          The PC87360, PC87363 and PC87364 Super I/O chips
796                          now have a (preliminary) driver
797                          Rework Super I/O detection
798                          Better support of devfs
799  Program sensors-detect-stat.pl: New
800
801
8022.8.5 (20040305)
803  File doc/chips/SUMMARY: Update
804  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
805  Makefiles hotplug and rrd: Remove -o and -g arguments to install
806  Module bmcsensors: Increase max SDRs to 100
807  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
808  Module i2c-amd756: Don't register driver to avoid driver conflicts.
809                     (Daniel Rune Jensen)
810  Module it87: Better temperature sensor types handling (Takeru Komoriya)
811               Fix reset=1 (Takeru Komoriya)
812  Module lm80: Code cleanups
813  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
814  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
815  Module w83627hf: Add w83637hf support
816                   Fix exported name
817                   Fix PWM in w83627thf
818                   Preserve other bits when forcing temp2/3 to comparator mode
819  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
820                  Remove asb100 support
821  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
822          Define driver ID if i2c-id.h doesn't have it yet.
823  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
824          Backport oops fix from Linux 2.6.
825  Modules (all chips): Get rid of useless headers
826  Program decode-edid.pl: Add sysfs support
827  Program sensors: Add w83637hf support
828                   Add support for Shuttle Ethernet EEPROMs
829                   Drop 2.6 subclient detection
830  Program sensors-detect: Add heuristics to the LM80 detection function
831                          Add support for W83L785R, improve W83L784R/AR
832                          Add GeForce FX 5600 as supported by rivatv
833                          More Super IO chips, better handling
834  Library: Update to match renames in fscher
835           Reverse temporary changes to w83l785ts mappings
836           Fix vt1211 and vt8231 uch_config not being writable
837           Add 2.6 lm80 support
838           Add w83637hf support
839           Remove in6 and temp1 from vt1211 and vt8231
840           Add support for Shuttle Ethernet EEPROMs
841           Remove unused as99127f features
842
843
8442.8.4 (20040207)
845  File doc/lm_sensors-FAQ.texi: Update 4.20.
846  File doc/chips/it87: Change hyst to low
847  File doc/chips/w83l785ts: New
848  File etc/sensors.conf.eg: Change it87 hyst to low
849                            Fix w83697hf supposed to have temp3
850                            Limits initialization for adm1025/ne1619
851                            Handle fscher voltage conversions
852                            Add Tyan Trinity S2495 KT400 setup (Eric
853                              Schumann)
854                            Fix fscher fan labels (Reinhard Nissl)
855  Library: Better 2.6 eeprom support
856           Change it87 hyst to low
857           Add 2.6 gl518sm, fscher support
858           Fix 2.6 negative voltages handling
859           Temporary fix to w83l785ts mappings
860  Module adm1025: Separate prefix for NE1619
861  Module adm1026: Remove use of temporary ID
862                  Define addresses as a range
863  Module bmcsensors: Fix reservations
864  Module fscher: Externalize voltage conversions
865  Module eeprom: Remove memtype
866  Module i2c-piix4: Fix resource release error
867                    Various cleanups
868  Program decode-vaio.pl: Add sysfs support
869  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
870                   Drop linux 2.2 support
871                   Add w83627hf
872  Program sensors: Do not show algorithm by default
873                   Cleanup temperature unit display code
874                   Cleanup label spacing code
875                   Fix output to UTF-8 terms (Marcel Sebek)
876                   Simplify gl518sm print
877                   Do not ignore errors in FSC chips prints
878                   Fix w83l785ts print
879                   Cleanup FSC chips prints
880  Program sensors-detect: Fix PATH issues
881                          Correctly point to the fscher driver
882
883
8842.8.3 (20040115)
885  File lm_sensors.spec: Update
886  Library: Add 2.6 eeprom, lm90 support
887           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
888  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
889  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
890  Module i2c-amd756: Fix byte writes
891  Module i2c-tsunami: Cleanups (Daniel Nilsson)
892  Module it87: Fix sg_tlx writes; fix sensor type reporting;
893               add 8712 Super I/O detection;
894               remove initialization of temp_type and fan_ctl;
895               remove init and temp_type module parameters
896  Module lm90: Handle hysteresis differently
897  Module smartbatt: Fix detection, magnitudes, temp
898  Module w83781d: Fix negative voltages
899  Module w83l785ts: New
900  Program eeprog: Make 8 bit mode the default
901  Program fancontrol: Improvements, fixes, support 2.6 kernels
902  Program mkpatch: Add lm75.h
903  Program pwmconfig: Improvements, fixes, support 2.6 kernels
904  Program sensors: Add ASB100 support
905  Program sensors-detect: Add 8712 Super I/O detection;
906                          add W83L785TS detection
907
908
9092.8.2 (20031211)
910  IMPORTANT: Limit initialization removed from all chip drivers!
911             If you didn't run 'sensors -s' in the past you may need to now!
912  File sensors.conf.eg: Change lm75 scaling back to 1;
913                        Add example for asb100
914  Library: Fix bmcsensors scaling, increase number of sensors;
915           Add w83627thf support; Advance version to 3.0.0;
916           Add hermes, ADM1032, ASB100 support;
917           Add it87 sensor type support;
918           Add sysfs support for kernel 2.6;
919           Fix memory leaks
920  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
921             Fail if no kernel .config file exists;
922             Don't build module dependencies for user and user_install
923  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
924          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
925          smsc47m1, thmc50, via686a, w83627hf, w83781d:
926          Remove initialization of limits by driver.
927  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
928  Modules (chip): Init cleanups
929  Module asb100: New
930  Module bmcsensors: Fix voltage scaling, voltage and fan limits
931  Modules ddcmon, eeprom: Add failure printks
932  Module fscher: New (Fujitsu-Siemens Hermes driver)
933  Module i2c-amd756: Fix AMD8111 support
934  Module i2c-amd8111: Fix byte writes
935  Module i2c-nforce2: Fix byte writes
936  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
937  Module i2c-sis630: Sync with 2.6.0-X driver version
938  Module i2c-viapro: Add support for Via 8237
939  Module it87: Add pwm and "smart guardian" support;
940               add it87 sensor type support
941  Module lm75: Fix negative voltages
942  Module lm90: Add ADM1032 support
943  Module w83781d: Fix 791d and 627hf detection
944  Module w83627hf: Add VID support
945  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
946  Program eeprog: New
947  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
948                                       support sysfs for i2c bus search
949  Program i2cdetect: Add -l option to list busses
950  Program i2cdump: Add 'c' mode for consective address reads
951  Program mkpatch: Cleanups
952  Program pwmconfig: Handle multiple fans controlled by a single pwm
953  Program sensord: Remove ddcmon support
954  Program sensors: Add ADM1032 support; add messages for sysfs
955  Program sensors-detect: Prefer Super I/O drivers;
956                          Fix W83627HF and W83791D detection; detect CSB6;
957                          Detect ADM1029, ADM1030, ADM1031;
958                          Detect W83637HF, W83697UF;
959                          Add it87 sensor type support; add sysfs support
960                          Reduce lm80 misdetects; remove PCFxxxx "detection"
961                          Detect VT8237 (KT600)
962                          Use VPD instead of DMI+ACPI for Thinkpad detection
963                          Suggest new asb100 driver instead of w83781d
964
965
9662.8.1 (20031005)
967  NOTE: Requires i2c-2.8.1 or newer!
968  File sensors.conf.eg: Improved adm1025 section
969                        Default temp labels for as99127f
970                        Improved lm83 section
971                        Better support for Asus A7V8X-X
972  File doc/chips/SUMMARY: Add SMSC manufacturer ID
973  File doc/chips/adm1025: Add decent documentation (almost new)
974  File doc/chips/lm83: Known motherboards list update, misc updates
975  Library: Change adm1025 names (hyst/over become low/high)
976           Swap adm1025 temp1 and temp2 to match the driver's order
977           Advance version to 2.0.1
978           Update lm83 support
979           Add support for lm90, xeontemp, max6650
980           Add separate messages for read and write errors
981           Add missing message for parse error
982  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
983  Modules (various): Fix includes for compilation on Alpha
984                     Use the new i2c_delay function instead of the various
985                     do_pause functions
986  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
987  Module i2c-nforce2: Cleanups
988  Module i2c-i810: Use readl/writel for portable access to PCI memory
989  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
990  Module i2c-savage4: Use readl/writel for portable access to PCI memory
991  Module i2c-sis630: Fix detection
992                     Add block data read/write support
993  Module i2c-sis645: Detection method change/bugfix
994  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
995  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
996  Module adm1025: Major driver update
997                  Add support for Philips NE1619
998                  Simplify the driver a lot (unified voltages, unified
999                  temperatures and much more)
1000                  Fix default voltage limits
1001                  Change default temperature limits
1002                  Swap remote and local temperatures to match the internal
1003                  registers order (make the code unification possible)
1004                  Export remote diode fault through alarms
1005  Module ddcmon: Major update
1006                 Add half a dozen new features
1007                 Add checksum parameter (same as for the eeprom module)
1008                 Fix monitor limits
1009  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
1010  Module lm78: Fix a fan_div/fan_min bug
1011  Module lm83: Add t_crit and alarms support
1012  Module lm90: New
1013  Module max6650: New
1014  Module saa1064: New
1015  Module smsc47m1: Add support for 47M142
1016  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1017                   enhance w83627thf support
1018  Module w83781d: Enhance chip detection; clean up error returns;
1019                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1020  Module xeontemp: New
1021  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
1022                           Mark Rambus as unsupported
1023  Program decode-edid.pl: New
1024                          Interfaces between our eeprom module and
1025                          parse-edid from the read-edid project
1026  Program p4b_smbus: Fix SMP compilation
1027  Program sensord: Add support for IT87 (Mike Black)
1028                   Change ADM1025 support to match the changes made to
1029                   the library
1030  Program sensors: Rewrite and enhance EEPROM support
1031                   Change LM83 and ADM1025 support to match the changes
1032                   made to the library
1033                   Add DRDRAM support to print_eeprom
1034                   Exit(1) on /proc write failure (Malte Starostik)
1035                   Add LM90, MAX6650 support
1036  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1037                          Add support for LM82, LM86, LM89
1038                          Improved W83781D family detection
1039                          Add support for AS19927F rev.2, ASB100 Bach
1040                          Add support for Asus Mozart-2 (3 types)
1041                          Add support for NE1619
1042                          Add support for FSC Hermes
1043                          Make sure /sbin is in the user's path
1044                          Fix EEPROM detection
1045                          Automatic module.conf and /dev/i2c* detection
1046                          Improve LM82 and LM83 detection
1047                          Handle "to-be-written" cleanly
1048                          Add detection for 47M14x Super I/O
1049                          Handle the one-address-many-chips-same-driver
1050                          case
1051
1052
10532.8.0 (20030714)
1054  NOTE: Requires i2c-2.8.0 or newer!!!
1055  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1056                  2.4.13 or later required for mkpatch.
1057  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1058                  i2c package
1059  File doc/chips/fscscy: Add watchdog documentation
1060  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
1061  File sensors.h: Now automatically generated
1062  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1063           add adm1026, lm83, lm85, w83791d support;
1064           Advance version to 2.0.0
1065  Makefiles: Generate warnings if new library won't be found by ld.so;
1066             Modules now install in kernel/drivers/i2c/[busses,chips];
1067             Ensure that headers in /usr/local/include are used first;
1068             Don't use /usr/include headers for modules;
1069             Handle multiple UTS_RELEASE definitions in linux/version.h;
1070             Automatically generate kernel/include/sensors.h;
1071             Remove old gzipped modules; remove old misc directory if empty;
1072             Remove pre-2.4 installation method;
1073             -Wall now the default;
1074             Add new targets user, user_install, and help;
1075             Run depmod after module installation
1076  Modules (all): Cleanups including
1077                - Add #include <i2c-proc.h>
1078                - C99 initializers
1079                - Remove #ifdef MODULE
1080                - Remove #ifndef THIS_MODULE
1081                - Remove #ifndef MODULE_LICENSE
1082                - Remove other 2.1/2.2 #ifdefs
1083                - Remove #include "sensors.h", copy SYSCTL defs to module
1084                - Remove excess #includes
1085                - Remove argument in i2c_register_entry()
1086                - Remove dummy xxx_command() definition
1087                - Remove EXPORT_NO_SYMBOLS
1088                - Remove init_MUTEX #define
1089                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1090                  no longer adjust their own refcounts
1091                - Use module_init() and module_exit()
1092                - Update to new i2c_driver struct definition
1093  Modules (bus PCI): Convert to PCI-module-style initialization
1094  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1095  Module adm1021: Set alarm on failed reads and report old value;
1096                  merge changes from kernel 2.5.54
1097  Module adm1026: New
1098  Module bmcsensors: Fix compile when DEBUG=1
1099  Modules ddcmon, eeprom: Use i2c block reads if possible;
1100                          better error handling
1101  Module ds1307: Add to Makefile
1102  Module gl520sm: Fix temperature over/hyst writes
1103  Module lm75: merge changes from kernel 2.5.54
1104  Module lm83: New
1105  Module lm85: New
1106  Module i2c-ali1535: Check for invalid transaction
1107  Module i2c-ali15x3: Check for invalid transaction
1108  Module i2c-amd756: merge changes from kernel 2.5.54;
1109                     check for invalid transaction
1110  Module i2c-amd8111: merge changes from kernel 2.5.54
1111  Module i2c-i801: Add support for 82801EB (ICH5)
1112  Module i2c-i810: Fix for some chips
1113  Module i2c-nforce2: New
1114  Module i2c-piix4: Check for invalid transaction
1115  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1116  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1117        north bridges; SiS962 and SiS963 south bridges
1118  Module i2c-viapro: Check for invalid transaction
1119  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1120          pwm and pwm enable support; update docs
1121  Module smbus-arp: Check adapter for HW or SW PEC support;
1122                    add reset option
1123  Module w83781d: Add support for w83791d
1124  Module w83627hf: New
1125  Program decode-dimms.pl: Recognize DDR and Rambus
1126  Program eeprom: Fix writes for small eeproms
1127  Program eeprom, eepromer: Use local i2c-dev.h for build
1128  Program fancontrol: New
1129  Program lm_sensors.init: Call sensors -s in start()
1130  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1131                   Add adm1026,lm85 support;
1132                   Remove sensors.c file; add sensors_compat.h;
1133                   Remove patches to i2c-core.c and drivers/char/mem.c;
1134                   Now works only for kernels 2.4.13 or later
1135  Program p4b_smbus: Fix 'make install';
1136                     Install in same place as other modules;
1137                     Clear correct bits in config word
1138  Program pwmconfig: New
1139  Program sensors: add adm1026, lm85, w83791d support
1140  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1141                          w83627hf, w83627thf, w83697hf);
1142                          Add support for SiS651, SiS961, SiS745, SiS746;
1143                          Support dmidecode 2.0 and later;
1144                          Fix "C" format error;
1145                          Add support for adm1026, 82801EB (ICH5), W83791D;
1146                          Add support for w83l785ts, nForce2;
1147                          Fix UTF-8 incompatibility;
1148                          Better support for lm75;
1149                          Add support for lm83
1150
11512.7.0 (20021208)
1152  NOTE: Requires i2c-2.7.0 or newer.
1153  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1154  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1155  File doc/busses/i2c-sis645: Add license
1156  File doc/chips/lm92: Add license, features
1157  File doc/chips/maxilife: Add license, parameters, features
1158  File doc/chips/smartbatt: Complete rewrite
1159  File doc/chips/vt8231: Add license, parameters
1160  File sensors.conf.eg: Add section for lm75; complete the lm78 section
1161  Library: Add support for MC1066; add multiple VRM version support for lm87;
1162           enhance adm1023 support; initial support for Sony Vaio eeprom;
1163           add support for bmcsensors; add hacks for additional dummy drivers
1164  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1165            add flags for x86_64 compiles
1166  Module adm1021: Add support for MC1066
1167  Module bmcsensors: New
1168  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1169                   kernel 2.5.43; fix 2.2 kernel compiles
1170  Module gl518sm: Iterate allowed only for rev 0x00
1171  Module i2c-amd756: Configure base address for nForce support;
1172                     check for uninitialized base address;
1173                     add support for amd8111 (SMBus 1.0)
1174  Module i2c-amd8111: New (SMBus 2.0)
1175  Module i2c-ipmb: New
1176  Module i2c-ipmi: New
1177  Module i2c-keywest: Sync with kernel 2.4.20
1178  Module i2c-sis630: Add support for SiS730
1179  Module i2c-sis645: Improve support for SiS645/961;
1180                     add support for SiS645DX/961 and SiS735;
1181                     fix 2.2 kernel compiles
1182  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1183  Module lm87: Add multiple VRM version support
1184  Module vt1211: Fix inx limits and alarms; fix in0
1185  Module vt8231: Fix inx limits and alarms; fix in0
1186  Module w83781d: Fix in0/in1 initialization
1187  Module smartbatt: New
1188  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1189  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1190                           stop decoding on checksum error
1191  Program dmidecode: Fix read bug; upgrade to version 1.8
1192  Program doc-insmod: Complete rewrite; fix author output
1193  Program doc-features: Complete rewrite; handle missing sysctl entries;
1194                        handle unknown prefix with suggestion
1195  Program lm_sensors.init: Remove spaces bug; add green/red output
1196  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1197  Program rrd: Add sanity limits to newly-created RRD.
1198  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1199  Program sensors: Add support for MC1066, Rambus Rimms;
1200                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1201                   initial support for Sony Vaio eeprom
1202  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1203                          IPMI, AMD8111; add help if no sensors found;
1204                          add ACPI method for IBM system detection;
1205                          work with old Perl versions again;
1206                          initial support for Sony Vaio eeprom
1207
12082.6.5 (20020915)
1209  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1210  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1211  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1212  Module dmi_scan: new
1213  Module ds1621: Fix enable/disable
1214  Module eeprom: Do not corrupt 24RF08's when checksum=1
1215  Module i2c-i801: Check for uninitialized base address;
1216                   enable if not enabled
1217  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1218  Module i2c-sis630: new
1219  Module i2c-sis645: new
1220  Module lm92: Fix in-kernel initialization
1221  Module via686a: Remove VT8231 support
1222  Module vt8231: new
1223  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1224  Program dmidecode: new
1225  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1226  Program mkpatch: Add Config.in entries for, lm92,
1227                   pcf8574, pcf8591, smsc47m1, vt1211;
1228                   add dmi_scan
1229  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1230  Program lm_sensors.init: fix stop()
1231  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1232                   add support for logging loadavg in RRD;
1233                   fix down-converting raw labels for RRD;
1234                   update chip support, still behind sensors
1235  Program sensors: Add /usr/local/etc to config file path;
1236                   fix -c and -u flags; add vt8231
1237  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1238                          refuse to run on IBM systems;
1239                          fix sysconfig module numbering;
1240                          change quick write to not corrupt 24RF08's
1241
12422.6.4 (20020719)
1243  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1244  File doc/vid: New
1245  File include/sensors_vid.h: New
1246  File sensors.conf.eg: Add vt1211, smsc47m1
1247  Library: Add multiple VRM version support for adm1025, w83781d;
1248           fix 'flex scanner jammed' on some systems;
1249           add vt1211, smsc47m1, lm92;
1250           fix access mode checking
1251  Makefiles: For 2.4+ kernels, modules now install in
1252             kernel/drivers/[i2c,sensors] , not misc/ , and
1253             'make install' removes old versions in misc/ .
1254             Use $CFLAGS and $CPPFLAGS if defined.
1255  Module adm1025: Add multiple VID version support
1256  Module ds1307: new
1257  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1258                     reliability improvements
1259  Module i2c-hydra: Flush posted writes
1260  Module i2c-i801: Add support for 82801DB (ICH4)
1261  Module i2c-i810: Flush posted writes
1262  Module i2c-savage4: new
1263  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1264  Module i2c-voodoo3: Flush posted writes
1265  Module ds1307: New
1266  Module lm92: New
1267  Module smbus-arp: new
1268  Module smsc47m1: new
1269  Module via686a: Add support for VT8231 sensors
1270  Module vt1211: new
1271  Module w83781d: Add multiple VID version support; fix temp alarms
1272  Program eeprom: new
1273  Program i2cdump: Add smbus block command specification, add PEC support
1274  Program lm_sensors.init: new
1275  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1276                   pcf8574, pcf8591, smsc47m1, vt1211
1277  Program p4b_smbus: Add support for ICH4
1278  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1279  Program sensord.init: Renamed, was prog/init/sensors
1280  Program sensord: Major update, now requires rrd source;
1281                   not compiled by default
1282  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1283                   (don't display algo. and adap.) option;
1284                   add vt1211, smsc47m1, lm92
1285  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1286                          add 82801DB, LM85; fix perl warnings;
1287                          generate /etc/sysconfig/lm_sensors for
1288                          lm_sensors.init script
1289
12902.6.3 (20020322)
1291  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1292  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1293  File doc/chips/it87: add more temp_type help
1294  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1295                        add adm1021 section; add lm87 AIN[1,2] template;
1296                        swap negative voltage limits for 782d,783s,627hf,
1297                        697hf,it87; add more it87 help; swap neg. voltage
1298                        limits for lm78(-j), lm79, w83781d, as99127f
1299  Library: Add PCF8591, W83697HF, ADM1023 support;
1300           fix w83* fan_min computes;
1301           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1302  Module adm1024: Add MODULE_LICENSE("GPL")
1303  Module bt869: Add s-video out and DVD resolution support
1304  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1305  Module fscscy: implement min/max for voltages and fans
1306  Module i2c-amd756: Add support for AMD768
1307  Module i2c-i810: Add support for 810E
1308  Module i2c-keywest: Big update, sync with kernel 2.4.18
1309  Module i2c-piix4: Check for uninitialized base address
1310  Module i2c-sis5595: Blacklist 645, 735
1311  Module i2c-viapro: Check for uninitialized base address
1312  Module gl518sm: Standardize /proc entries in0-3
1313  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1314               fan -> fan1; fix temp2 limit writes
1315  Module pcf8574: Add support for PCF8574A; /proc interface changed
1316  Module pcf8591: new
1317  Module sis5595: Blacklist 645, 735
1318  Module w83781d: Add W83697HF support; allow force_subclients parameter
1319                  for Tyan 2460
1320  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1321  Program decode-vaio.pl: new
1322  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1323                   add text output
1324  Program init/sensors: New SysV init script
1325  Program mkpatch.pl: Add support for fscscy, add more help entries
1326  Program p4b_smbus: new
1327  Program rrd: Install summ_week.cgi
1328  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1329                   clean up chassis intrusion prints
1330  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1331                          fix Via686a and it87 detection;
1332                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1333                          fix uninitialized values; it87 beats lm78
1334
13352.6.2 (20011118)
1336  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1337  Chip Modules (all): malloc.h -> slab.h
1338  Modules (all): Add MODULE_LICENSE("GPL")
1339  File doc/FAQ: More updates and additions
1340  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1341  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1342           update it87 alarm ID's.
1343  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1344  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1345  Module i2c-amd756: Improve busy handling/printk's
1346  Module i2c-i801: Add 82801CA/CAM support
1347  Module i2c-keywest: Sync with PPC people, it works now
1348  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1349  Module i2c-viapro: Add Via VT8233 support
1350  Module it87: Merge alarm_* /proc entries to alarms
1351  Module sis5595: Fix support for rev B0
1352  Module via686a: Make limit initializations reliable
1353  Module w83781d: Allow init=0 parameter to bypass initialization
1354  Program isadump: Add flat address space (PCI) support
1355  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1356                      fscpos, it87, maxilife, mtp008
1357  Program sensors: Fix w83781d temp precision
1358  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1359                          Fujitsu Poseidon and Scylla,
1360                          Intel 82443MX and 82801CA/CAM detection,
1361                          add ITE 8172G detection (driver in kernel 2.4.10)
1362
13632.6.1 (20010830)
1364  File BUGS: Updated
1365  File doc/FAQ: More updates and additions
1366  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1367  File sensors.conf.eg: Fix/enhance it87 section
1368  Library: ds1621 and it87 updates
1369  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1370  Module i2c-amd756: Add AMD 766 support
1371  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1372  Module i2c-piix4: Add Serverworks CSB5 support
1373  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1374  Module adm1025: Fixed temp2 min/max writes
1375  Module ds1621: Add 12-bit precision mode
1376  Module it87: Enable all alarms, add in8 support, add sensor type selection
1377  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1378                  remove support for module
1379  Module sis5595: Recognize unsupported chips and refuse to load
1380  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1381  Program eepromer: new
1382  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1383                      of sensors.c as a module in kernel
1384  Program sensors: it87 updates; adjust temp. precision for some chips
1385  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1386                          recognize unsupported SiS chips;
1387                          recognize AMD 766 and Serverworks CSB5.
1388
13892.6.0 (20010612)
1390  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1391        If your make fails because it can't find <linux/i2c-proc.h>, you
1392        forgot this step!!!
1393  File doc/FAQ: Many, many updates and additions
1394  File doc/busses/i2c-sis5595: new
1395  File doc/busses/i2c-tsunami: new
1396  File doc/chips/it87: new
1397  File doc/chips/via686a: Claim support for 686b.
1398  File README.thinkpad: new
1399  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1400                        Add lm87, adm9240, ds1780, lm81 templates;
1401                        Enhance help comments in file;
1402                        Add Tyan S2510 dual-MTP008 example;
1403                        Make separate sis5595 section.
1404  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1405  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1406  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1407           Add support for maxilife-nba and amd1024;
1408           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1409  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1410  Chip Modules (all): Change from sensors_* to i2c_* globals
1411                      for new i2c-proc.[ch]
1412  Makefiles: enhance to support Alpha architecture
1413  Module adm1021: Fix lm84 and gl523sm support
1414  Module adm1024: new
1415  Module i2c-i801: Chip detection cleanup
1416  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1417  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1418  Module i2c-tsunami: New
1419  Module i2c-via: Ensure i2c bus is tristated correctly.
1420  Module it87: new driver for IT8705, IT8712, Sis950 chips
1421  Module lm78: Recognize chipid=0x20
1422  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1423  Module mtp008: Fix temp initializations;
1424                 Save BIOS pin configuration of temps and fans;
1425                 Fix sensor type reads/writes and fan min writes;
1426                 Fix spurious invalid sensor type messages
1427  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1428                  used for patched kernel now.
1429                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1430  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1431                  Allow force_addr=0xaddr
1432  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1433  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1434                  reading changes; Add messages for subclient
1435                  registration failure
1436  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1437  Program i2cset: new
1438  Program isadump: fix for Alpha arch. compiles
1439  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1440                      Remove ltc1710; Fix i2c_sis5595 typo;
1441                      Support kernel 2.4.5 makefile change;
1442                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1443  Program sens_update_rrd: new
1444  Program sensord: Add -d (debug) and -p (pid-file) options
1445  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1446                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1447                   Change mtp008 temps from max/min to limit/hyst;
1448                   Add maxilife-nba, adm1024, it87 support.
1449  Program sensors-detect: Recognize lm78 with chipid=0x20;
1450                          Recognize SMSC Victory66 South Bridge;
1451                          Add devfs /dev/i2c/x support;
1452                          Add adm1024, it87xx support; Add thinkpad warning.
1453  Program tellerstats: new
1454
14552.5.5 (20010115)
1456  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1457        you have kernel 2.4.0-prerelease or greater.
1458  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1459  File doc/developers/proc: new
1460  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1461  Library: Add ds1621, mtp008 support
1462  Module adm1021: Add support for adm1021a / adm1023
1463  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1464  Module adm1025: Add support for remote temp; rename /proc entries to
1465                  in[0-5] and temp[1-2]; fix negative temp readings
1466  Module adm9240: Rename /proc entries to in[0-5]
1467  Module ddcmon: allow force and force_ddcmon parameters
1468  Module ds1621: new
1469  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1470  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1471  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1472  Module lm87: cleanup, update voltage calculations
1473  Module mtp008: new
1474  Module pcf8574: change update time to 5 seconds
1475  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1476  Module w83781d: fix beep setting via /proc
1477  Programs editticket, readticket: new
1478  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1479  Program mkpatch.pl: more fixes; now adds many more modules
1480  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1481                   add adm1025 temp2; report temp limits correctly as
1482                   min/max or limit/hysteresis; print message if no
1483                   sensors are found. Removed false errors from lm87 reads.
1484  Program sensors-detect: Add ds1621, mtp008 detection;
1485                          add ServerWorks detection
1486
14872.5.4 (20001012)
1488  Module i2c-viapro: Add support for Via 596B (0x3051)
1489  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1490  Program mkpatch.pl: fixed infinite loop
1491  Program sensors-detect: Detect Via 596B (0x3051)
1492
14932.5.3 (20001008)
1494  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1495  File useful_addresses.html: update
1496  Library: Add lm87 support
1497  Module pcf8574: new
1498  Module i2c-ali1535: new
1499  Module i2c-ali15x3: removed force #ifdef.
1500  Module i2c-i801: support Intel 82801BA (815E chipset)
1501  Module i2c-i801: add i2c block write support, fix smbus block bugs
1502                   (requires i2c 2.5.3 package)
1503  Module i2c-i810: support Intel 82815
1504  Module lm87: new
1505  Module sensors: Fix for kernel 2.4.0-test8
1506                  (remove copy_to_user_ret and put_user_ret)
1507  Module w83781d: limit fan divisors to 8 max. for as99127f
1508  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1509  Program i2cdump: Add smbus block read support
1510  Programs i2cdetect, i2cdump: Improve error reporting
1511  Program sensors: new switch -u (--unknown)
1512  Program sensors-detect: detect Intel 82801BA (815E chipset)
1513  Program sensors-detect: detect Intel 82815
1514  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1515  Program sensors-detect: detect National LM87
1516  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1517  Program sensors-detect: Improve error reporting
1518
15192.5.2 (20000709)
1520  File sensors.conf.eg: Fix lm80 in8 calculation
1521  Module w83781d: W83783S no longer crashes on unloading
1522  Program sensors-detect: more robustness in case of unknown i2c adapters
1523  Program sensors-detect, libsensors: fix eeprom size reporting
1524  Program sensord: more flexibility, support for alarm scanning etc.
1525  Program sensors: support for ignore setting on sensor alarms.
1526  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1527
15282.5.1 (20000618)
1529  Library: Add adm1025 support
1530  Module adm1025: new
1531  Module ddcmon: Fixed bus scan which could hang SMBus
1532  Module i2c-keywest: new
1533  Module maxilife: Add support for Maxilife '99 (NBA)
1534  Module via686a: Enable sensors if not enabled by BIOS
1535  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1536  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1537  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1538  Module w83781d: Fis as99127f fan speed (was 66% too high)
1539  Module w83781d: Improve beep input checking
1540  Program i2cdump: Add Winbond-style bank selection
1541  Program isadump: Add Winbond-style bank selection
1542  Program sensors: Add adm1025 support.
1543  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1544  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1545  File sensors.conf.eg: Add Maxilife '99 entries
1546  File sensors.conf.eg: Remove some as99127f entries.
1547    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1548          won't reinstall it) or else 'sensors -s' will fail.
1549
15502.5.0 (20000312)
1551  Dropped all kernel 2.0 and 2.1 compatibility
1552  Module i2c-i810: new
1553  Module ddcmon: new
1554  Module via686a: new
1555  Module i2c-amd756: fixed region request
1556  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1557  Module w83781d: Don't change pin settings at initialization;
1558                  also fix chip detection.
1559  Library: Support for ddcmon and via686a
1560  Program sensors-detect: Support for ddcmon and via686a
1561  Program sensors: Support for eeprom, ddcmon and via686a
1562
15632.4.5 (20000116)
1564  Introduced DESTDIR installation prefix
1565  Module lm80: fixes, temperature now read and set correctly
1566  Module i2c-voodoo3: driver enhancements
1567  Module w83781d: fixes, AS99127 works much better now
1568  Library: New ignore keyword in config file
1569  Programs: Support for new ignore keyword
1570  Program sensors-detect: Support for MGA detections
1571
15722.4.4 (19991201)
1573  Addition of the alpha release of AMD 756 SMBus host support.
1574  Many fixes and updates to the gl518sm driver
1575  Updates and fixes for device detection
1576
15772.4.0 (19990920)
1578  Too much to list.
1579  i2c and smbus parts are split off to a separate i2c package.
1580  New drivers and other stuff.
1581
15822.3.4 (19990616)
1583  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1584  All: Now compiles against kernel 2.0.x (again ;)
1585  Module gl518sm: some updates and refinements
1586
15872.3.3 (19990603)
1588  All: Now compiles against kernel 2.3.x (x >= 1)
1589  Module i2c-voodoo3: Timing issue fixes
1590  Module bt869: Seems to be functional and relatively well tested
1591  Many modules were modified to be more compatible with the new
1592   Mutex structure in the new experimental kernels.
1593
15942.3.2 (19990507)
1595  Module i2c-hydra: Now compiles on 2.0.x kernels
1596  Module i2c-lm75: Slightly better detection
1597  * New, but not compiled by default:
1598  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1599  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1600
16012.3.1 (19990501)
1602  All: Now compiles on PPC
1603  Module i2c-hydra: NEW
1604  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1605  Module w83781d: Removed deadlock (mutex was not initialized)
1606  Documentation: A few glitches removed
1607  Makefile: default module installation directory is now
1608            /lib/modules/current/extra/misc
1609  Program sensors-detect: PPC Hydra now detected
1610  Program sensors: Now prints complete GL518SM information
1611  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1612
16132.3.0 (19990422)
1614  All: Many, many changes and improvements
1615  All: Many small bugs and problems removed
1616  Modules: New insmod parameters
1617  Modules: Much improved chip detection
1618  Module maxilife: NEW
1619  Module adm1021: MAX1617A now also supported
1620  Module adm9240: DS1780 now also supported
1621  Module w83781d: W83782D and W83783S now also supported
1622  Program sensors-detect: NEW
1623  Library: All chips now supported
1624  Documentation: Very much improved
1625
16262.2.2 (199903??)
1627  Just some minor updates and bug fixes.
1628
16292.2.1 (19990218)
1630  All: Removed compile warnings
1631  Module i2c-dev: Small bug removed if DEBUG=1 was used
1632  Module sis5595: Now compiles for 2.0 kernels
1633  Module adm1021: Detection corrected
1634
16352.2.0 (19990216)
1636  All: Set copyrights to include 1999
1637  All: Small bugfixes
1638  I2C: Upgraded to newest archive of Simon Vogl
1639  Module i2c-dev: NEW
1640  Module i2c-ali15x3: NEW
1641  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1642     directories, and somewhat improved
1643  Module sis5595: NEW
1644  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1645  Library: Support for new chip drivers, several small bugs fixed
1646  Library manual pages: NEW
1647  Program i2cdetect: Moved to detect directory
1648  Program detect.pl: NEW
1649  Program doc-features: NEW
1650  Program sensors: Added man-page
1651  Document BUGS: Added cdrom bug and kernel i2c conflict
1652
16532.1.2 (19990116)
1654  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1655  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1656  Documentation in doc/kernel: NEW
1657
16582.1.1 (19990107)
1659  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1660                     and older
1661  Module gl518sm.o: Miscelaneous bugs and problems solved
1662  Program isadump: NEW
1663
16642.1.0 (19981230)
1665  Library: Completely NEW
1666  Program sensors: NEW
1667  Program grab_busses: NEW
1668  Program decode-dimms: More information
1669  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1670  Module w83781d.o: NEW
1671  Module lm80.o: NEW
1672  Module gl518sm.o: new procfile beep, several small updates
1673  Modules: Now use pin readings, no more scaling within the kernel (use the
1674           library instead)
1675
16762.0.2 (19981214)
1677  Module eeprom.o: NEW
1678  Program decode-dimms: NEW
1679  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1680           2.1.58
1681  Modules: Somewhat less verbose on transfers
1682  Module lm78.o now recognizes and handles lm78-j and lm79
1683
16842.0.1 (1998121?)
1685  Module gl518sm.o updates, to make it actually work
1686  Module lm75.o high/low-byte swapping write bug fixed
1687
16882.0.0 (19981209)
1689  Initial release
Note: See TracBrowser for help on using the browser.