root/lm-sensors/trunk/CHANGES @ 4963

Revision 4963, 84.1 KB (checked in by khali, 8 years ago)

Fix SMSC LPC47B357/M967 detection. Patch from Juerg Haefliger.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
5  File i2c-dev.h: Rename I2C_FUNC_SMBUS_HWPEC_CALC to I2C_FUNC_SMBUS_PEC
6  File Add a thmc50 section
7  File useful_addresses.html: Moved to the wiki
8  Library: Fix a memory leak on error
9           Speed up sensors_get_ignored() a bit
10           Fix thmc50 support for Linux 2.6
11           Fix bmcsensors support for Linux 2.6
12           Fix lm93 VID support for Linux 2.6
13           Fix adm1024 support for Linux 2.6
14           Fix maxilife support for Linux 2.6
15           Fix magnitude of temperature offsets in Linux 2.6
16           Fix adm1026 critical temperature limits for Linux 2.6
17           Fix smsc47m192 temperature faults
18           Add sch311x support
19           Add support for adm1022 temp3
20  Makefile: Fix kernel version detection (#2187)
21  Man page sensord.8: Update
22  Module fscher: Add missing read of control register (2.6 backport)
23  Module i2c-i801: Add Tolapai support (2.6 backport)
24  Module i2c-nforce2: Declare PEC as supported (2.6 backport)
25  Module i2c-piix4: Add ATI SB700 and SB800 support (2.6 backport)
26  Module lm93: Fix an array overrun (2.6 backport)
27  Program sensord: Fix f71805f fans
28                   Syncronize the version with lm-sensors
29                   Fix a memory leak when daemonizing
30                   Fix memory leaks in command line parsing
31                   Add w83793 support
32                   Log the error code on failure
33                   Add lm87 support
34  Program sensors: Fix a memory leak on error (with -u)
35                   Add sch311x support
36                   Hide error on missing dme1737 fan and pwm
37                   Add thmc50/adm1022 support
38                   Hide error on missing adm1021 die code
39  Program sensors-detect: Don't probe i2c-isa as a regular i2c bus
40                          Add Winbond W83L786NR/NG/R/G detection
41                          Add Winbond W83L771W/G detection
42                          Add Intel Tolapai SMBus detection
43                          Fix SMSC SCH311x detection
44                          Add AMD K10 CPU sensor detection
45                          Fix SMSC LPC47B357/M967 detection
482.10.4 (20070716)
49  File doc/vid: Update the sysfs paths, update the chip lists
50  File i2c-dev.h: Support I2C block reads with specified length
51  File Add a dme1737 section
52  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
53  Library: Clean up pwm symbol names translation
54           Add dme1737 support
55           Add applesmc support
56           Add abituguru3 support
57           Add f71882fg support
58           Add w83627ehf support (for Linux 2.4)
59           Add support for the w83627ehf VID function
60           Add support for the w83627ehf thermal sensor types
61           Add support for it87 fan4 and fan5
62  Man page sensors.conf.5: Update the chip statement section
63  Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
64  Module lm85: Fix setting the fan speed min limit to 0
65               Add support for the EMC6D102 extra resolution bits
66  Module thmc50: Fix the i2c address range
67  Module w83627ehf: New (2.6 backport)
68  Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
69  Program i2cdump: Use the new I2C block read function
70  Program isadump: Detect when address bit 7 is a busy flag
71                   Fix Super-I/O exit sequence for Winbond/Fintek chips
72  Program fancontrol: Use let for arithmetic evaluation
73                      No longer need awk and grep
74                      Limit calls to external programs (Linux 2.6 only)
75                      Check for configuration file validity
76                      Support optional min and max PWM values
77                      Better integration with init scripts
78                      Use linear control instead of quadratic
79  Program pwmconfig: Use smaller steps for low PWM values
80                     Support optional min and max PWM values
81  Program mkpatch: Include w83627ehf
82  Program rrd: Support non-i2c devices (hwmon class)
83               Add missing shell declarations
84               Update URI
85  Program sensors: Drop ddcmon and eeprom support
86                   Add dme1737 support
87                   Add applesmc support
88                   Add max6680 support
89                   Add abituguru3 support
90                   Add f71882fg support
91                   Fix alignment of alarm for one-limit temperatures
92                   Add w83627ehf support (for Linux 2.4)
93                   Add support for the w83627ehf VID function
94                   Add support for the w83627ehf thermal sensor types
95                   Add support for it87 fan4 and fan5
96                   Display the extra resolution bits of the emc6d102
97  Program sensors-detect: Stop Super-I/O probe after first family success
98                          Fix SMSC DME1737 detection
99                          Add /usr/sbin to the PATH (#2199)
100                          Add ATI SB700 detection
101                          Add Maxim MAX6680/MAX6681 detection
102                          Add IT8726F detection
103                          Fix IPMI support for 2.6 kernels
104                          Add detection for non-standard SMSC Super-I/Os
105                          No longer depend on i2cdetect
106                          Add SMSC SCH5317 detection
107                          Drop detection of most non-sensors I2C chips
108                          Fix ADM1022 detection
109                          Add detection of many SMSC Super-I/O chips
110                          Add Fintek F71806FG and F71862FG detection
1132.10.3 (20070319)
114  Library: Do not skip i2c adapters with only a class device and no
115            physical device. This change is required to survive the
116            planned struct class_dev removal from future 2.6 kernels.
117           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
118           Recognize i2c-isa-based devices as such even after class_dev
119            is gone
120           Compile with -D_REENTRANT
121           Fix support of Linux 2.6's max6650 driver
122           Fix max1619 support
123  Man page i2cdetect.8: Scanning range can be restricted
124  Module bmcsensors: Fix debugging messages
125  Module i2c-ali1563: Improve the status messages (2.6 backport)
126                      Fix device initialization (2.6 backport)
127  Module i2c-amd8111: Cleanups (2.6 backport)
128                      Fix initialization race (2.6 backport)
129  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
130  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
131  Module i2c-viapro: Add CX700 support (2.6 backport)
132  Module smsc47m1: Add SMSC LPC47M292 support
133                   Get rid of a useless semaphore (2.6 backport)
134  Programs i2cdetect, i2cdump, isadump: Flush output in real time
135  Program i2cdump: Cleaner output in SMBus block read mode
136  Program Fix pwmN_enable access (#2190)
137  Program sensors: Add smsc47m2 support (fans)
138                   Fix -A option (hide adapter name) on error
139  Program sensors-detect: Only probe relevant I2C addresses
140                          Drop ARP-capable device detection
141                          Add Maxim MAX6655/MAX6656 detection
142                           (Olexiy Avramchenko)
143                          Add Maxim MAX1668, MAX1805, MAX1989 detection
144                          Add VIA CX700 detection
145                          Drop legacy W83627HF ISA detection
146                          Don't bufferize stdout during probes
147                          Speed up the LM75 and LM77 detection
148                          Clean up the EEPROM detection
149                          Add Dallas DS75 detection
150                          Add SMSC LPC47M292 detection
151                          Add nVidia MCP61 and MCP65 detection
152                          Fix ADM1028 detection
153                          Add Nat. Semi. PC8347L Super-I/O detection
154                          Add SMSC SCH5504 Super-I/O detection (no sensors)
155                          Make the LM78 and W83781D detection safer
1582.10.2 (20070115)
159  RPM: Obsolete, removed
160  File doc/fan-divisors: Update
161  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
162  Library: Add support for the pc87247 driver (fans only)
163           Probe for busses before chips
164           Drop support for algorithm names
165           Add support for coretemp driver   
166           Major update/optimization of config-file scanner
167           Add config-file scanner regression tests
168           Add f71872f support
169           Add w83627dhg support (David Holl, #2157)
170           Get the i2c adapter names from
171           Add adm1029 support (Corentin Labbe)
172  Man page i2cdetect.8: Describe the output convention
173  Man page sensors.1: Update (option -c) and clean up
174  Module bmcsensors: Fix several warnings
175                     Fix fragile structure initialization
176  Module i2c-i801: Add ICH9 support
177  Module p4b_smbus: Add support for the ICH5
178  Module f71805f: Fix the device address decoding (2.6 backport)
179  Module icspll: Delete. It was useless and dangerous.
180  Program Remove spaces at end of lines
181  Program eepromer: Fix loads of warnings
182  Program i2cdetect: Make the output clearer
183  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
184  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
185                            without need of recompilation.
186  Programs dump/*: More robust handling of user inputs
187  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
188                                  Add support for non-i2c drivers
189  Program Disable debugging by default
190                         Add support for non-i2c drivers
191                         More tolerant config file parsing
192  Program sensord: Add pc87247 support (fans only)
193                   Add vt1211 support (#2150)
194                   Add w83627dhg support (David Holl, #2157)
195                   Add w83627ehf voltage support (Dave Platt)
196                   Add k8temp support (Dave Platt)
197  Program sensors: Add pc87247 support (fans only)
198                   Hide error on missing f71805f fan
199                   Handle option -c more efficiently
200                   Drop option -a (show algorithm names)
201                   Add f71872f support
202                   Add w83627dhg support (David Holl, #2157)
203                   Add adm1029 support (Corentin Labbe)
204                   Hide error on missing w83793 temp (Gong Jun)
205  Program sensors-detect: Add SMSC DME1737 detection
206                          Add Fintek F71882FG and EPoX EP1308 detection
207                          Add Intel Core thermal sensor detection
208                          Preallocate memory for I2C_FUNCS ioctl (#2138)
209                          Prevent misdetection of MAX6633/MAX6634/MAX6635
210                          Add Intel ICH9 detection
211                          Add Maxim MAX6648/MAX6692 detection
212                          Improve ADM1029 detection
213                          Add Andigilog chips detection
214                          Add Intel AMB FB-DIMM thermal sensor detection
215                          Add ATI SB600 detection
2182.10.1 (20060924)
219  File doc/developers/checklist renamed to dev/developers/release_checklist
220          with clarifications and updates for new SVN server.
221  File README.package: Delete.
222  File doc/busses/i2c-piix4: Update (2.6 backport)
223  File doc/developers/sysfs-interface: Update
224  File etc/ Add an smsc47m192 section
225                            Comment out all set statements
226                            Add an it8716 section
227                            Add a w83793 section
228                            Adjust the vt1211 section to match the new driver
229                             interface
230  Library: Fix device scan when no i2c support is present
231           Add support for W83627EHF voltage inputs and alarms
232           Add support for the smsc47m192 driver
233           Fix all memory leaks (yeah!)
234           Fix no sensors being reported as an error
235           Add support for the IT8716F and IT8718F chips
236           Add support for the W83793 chip (Yuan Mu)
237           Map the 2.6 adm1026's fan8 to fan0
238           Missing sysfs busses and classes are not errors
239           Change vt1211 temp3-7 magnitude from 1 to 3
240  Makefile: Don't grep autoconf.h on user-space targets
241            Fix depmod on non-running kernel version
242            Remove empty include directories on make user_uninstall
243  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
244  Module i2c-amd756-s4882: Improve static semaphore initialization
245                           (2.6 backport)
246  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
247                   Add ICH8 support (2.6 backport)
248                   Fix block transaction poll loops (2.6 backport)
249                   Remove PCI function check (2.6 backport)
250                   Cleanups (2.6 backport)
251  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
252  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
253                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
254                    Drop the fix_hstcfg parameter (2.6 backport)
255  Module i2c-viapro: Fix compilation with kernels < 2.4.21
256                     Add VT8237A and VT8251
257  Module lm83: Add LM82 support (2.6 backport)
258  Module vt1211: The VT1211 has no in6
259                 Rework the voltage and temperature conversions and the
260                  temperature input order to match the Linux 2.6 driver
261  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
262                  Add specific alarm and beep defines for the W83791D
263  Module w83792d: Fix PWM range (2.6 backport)
264  Program Decode depending on the memory type
265                           Decode the manufacturing date to an ISO8601 date
266                           Add the memory size computation and provide brief
267                            timing characteritics for SDRAM/DDR/DDR2 memory
268                           Add memory size computation for Rambus memory
269                           Various output cleanups and fixes
270  Program Add /usr/sbin or /usr/local/sbin to $PATH if needed
271  Program Detect and skip false positives
272  Program i2cdetect: Add a mode to print adapter functionalities
273  Program i2cdump: Restore bank after bank switching
274                   Add new mode W (read word on even register addresses)
275  Program mkpatch: Fix typo breaking f71805f
276                   Turn warnings on (-w), and fix them
277                   Print a usage message on missing command line parameters
278  Program pwmconfig: Use mktemp instead of tempfile
279  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
280                   Add smsc47m192 support
281                   Add abituguru support (Hans de Goede)
282                   Fix memory leak when printing an unknown chip
283                   Add it8716 and it8718 support
284                   Make each it87 fan and fan div optional
285                   Print missing w83791d values
286                   Add w83793 support (Yuan Mu)
287                   The adt7463 may not have in4 (#2119)
288                   Hide more vt1211 missing input errors
289                   Clearer error messages when no sensors found
290  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
291                          Add ATI IXP200/300/400 SMBus detection
292                          Prevent warning on 64-bit PCI addresses
293                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
294                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
295                           F75384S/M, F75387SG/RG and F81218D detection
296                          Add Winbond W83793R/G and W83627DHG detection
297                          Handle the W83791D driver difference between kernels
298                          Add nForce4 MCP04, MCP51 and MCP55 detection
299                          Add AMD Geode devices detection
300                          Add ITE IT8716F and IT8718F detection
301                          Add NatSemi/Winbond PC87427 detection
302                          Get driver information for busy addresses from
303                           sysfs (2.6 only)
304                          Drop the ISA IT87xxF detection
305                          Check i2c adapter functionalities before probing
306                          Add Intel ICH8 SMBus detection
307                          Add AMD K8 thermal sensors detection
308                          Simplify detection of SiS5595, VIA686 and VT8231
309                          Add Analog Devices ADM1033, ADM1034, ADT7462,
310                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
311                          Check for root user at startup
312                          Attempt to be slightly more user-friendly
313                          Add VT8237A and VT8251
314                          Remove detection of nVidia graphics adapters
315                          Use sysfs for PCI device enumeration
316                          Add generic PCI SMBus adapter detection
317                          Add generic Super-I/O logical device detection
318                          Add SMSC LPC47M172/182 detection
3212.10.0 (20060214)
322  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
323  File doc/busses/i2c-viapro: Update (2.6 backport)
324  File doc/chips/via686a: Update (2.6 backport)
325  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
326  File etc/ Do not set vrm by default
327  File i2c-dev.h: Fix union i2c_smbus_data definition
328                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
329                  Add missing parentheses around macros
330                  Drop I2C_FUNC_SMBUS_EMUL
331                  Drop I2C_FUNC_SMBUS_*_PEC
332                  Drop I2C_SMBUS_*_PEC
333  File sensors_vid.h: Drop default VRM
334  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
335           This is intentional.  Use if you still
336           need your memory SPD data.
337  Library: Big update to use libsysfs.  More TODO though.
338           Fix bus matching code for Linux 2.6 (Karsten Petersen)
339           Add f71805f, w83687thf support
340           Add platform drivers support
341           Fix sysctl warnings on x86_64
342           Restore vt1211 temp1
343  Makefile: Compile user-space programs with -Wundef
344  Module i2c-i801: Simplify the hardware PEC code
345                   Always set PEC mode explicitly before each transaction
346  Module i2c-i810: Documentation update, PCI IDs cleanup
347  Module i2c-keywest: Remove bus probing code (2.6 backport)
348  Module i2c-nforce2: Remove dead code (2.6 backport)
349                      Add the ID of the nForce4 MCP-04 (2.6 backport)
350  Module i2c-via: Remove dead code
351  Module i2c-viapro: Remove dead code
352                     Support I2C block read (2.6 backport)
353                     Code cleanups (2.6 backport)
354                     Improve debug register dump (2.6 backport)
355  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
356          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
357          i2c-sis645: Use pci_driver name to request I/O region; do
358                      not initialize i2c_adapter name to "unset" (2.6
359                      backport)
360  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
361                                              (2.6 backport)
362  Module adm9240: Cleanups (2.6 backport)
363  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
364  Module it87: Minor cleanups
365               Fix fan3_div setting bug (Anton V. Staaf)
366  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
367               Separate the register read function
368               Add PEC support for the ADM1032
369  Module via686a: Cleanups
370  Module w83627hf: Drop useless initialization step (2.6 backport)
371                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
372                   Fix alarms (Yuan Mu)
373                   Preserve fan min on fan div change (Yuan Mu)
374                   Properly handle W83627THF without VID (Yuan Mu)
375                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
376                   Add W83687THF support
377  Module w83781d: Drop W83697HF support (Grant Coady)
378  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
379                  Fix fan control mode (PWM/DC) reporting
380                  Fix fan div auto-adjust (Yuan Mu)
381                  Fix the subclient handling
382  Module w83l785ts: Minor cleanup (2.6 backport)
383  Module vt1211: Restore temp1
384  Modules vt1211, vt8231: Change default VRM to 9.1
385  Program Add lookup tables for manufacturer names
386                           Fix rounding error in PCxxxx speed computation
387                           Improve text output
388                           Improve speed under Linux 2.6
389                           Verify checksum before decoding anything
390                           Improve manufacturing location decoding
391                           Improve memory type detection
392                           Improve part number decoding
393  Program i2cdump: Drop now useless #ifdef tests
394                   Fix capability check for continuous byte mode
395  Program i2cget: New
396  Program i2cset: Add PEC support
397                  Fix argc check
398  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
399                                       Print the correct bus type if bus
400                                       functionality can be queried
401  Program isadump: Display the real addresses in flat mode
402  Program Silently skip already existing nodes
403  Program mkpatch: Include f71805f
404  Program sensord: Do not log algorithm names
405                   Drop EEPROM support (Aurelien Jarno)
406                   Add W83627EHF, F71805F/FG support
407                   Fix PC87365/PC87366 alarms
408  Program sensors: Drop free_the_label
409                   Fix compilation with uclibc (no iconv)
410                   Add f71805f, w83687thf support
411  Program sensors-detect: Drop algorithm names
412                          Do not rely on i2cdetect -l printing algo names
413                          Simplify adapter name matching mechanism
414                          New address for ADM1032, ADT7461
415                          Improve ADT7467, ADT7468 support
416                          Fix MAX6659 reported driver
417                          Add Fintek F71805F detection
418                          Add Analog Devices ADT7476 detection
419                          Add Intel 82845G detection
420                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
421                          Fix udev detection in some corner case
422                          Improve DS1621 detection
423                          Always prefer ISA access over SMBus access
4262.9.2 (20050906)
427  File doc/chips/*: Big update (2.6 backport)
428  Library: Drop ds1780-specific code (now use adm9240)
429           Fix memory leak in sensors_get_label()
430           Support /sys/class/hwmon (Linux 2.6.14+)
431           Limit stack usage in sensors_read_proc_chips()
432  Makefile: Detect 2.6+ kernels and check targets
433  Man page isaset.8: Fix typos
434  Module adm1031: Fix broken kfree() calls
435  Module i2c-ali1563: New (2.6 backport by Winbond)
436  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
437  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
438          w83627hf.c: Tag find function __init
439  Module lm93: Fix memory leak
440  Module smsc47m1: Fix PWM enable polarity on read
441  Modules w83627hf, w83781d: Allow setting fan divisor to 128
442  Program Support Linux 2.6 (Burkart Lingner)
443                           Added DDR/DDR2 frequency reporting in convenient
444                           form of DDRxxx PCyyyy
445  Program i2cdump: Properly handle short i2c block reads
446  Program Fix compile errors
447  Program mkpatch: Include i2c-ali1563
448                   Include w83792d
449  Program pwmconfig: Fix unsafe temporary file use
450  Program rrd: Support 2.6 kernels
451  Program sensord: Add support for w83637hf
452                   Support pc87360 (Henrik Brix Andersen)
453  Program sensors: Support the VAIO "VGN" prefix for eeprom
454  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
455                          Advertise the w83792d driver
456                          Improve IT8705F and IT8712F detection
457                          Merge LM82 and LM83 detection
458                          Add W83687THF detection
4612.9.1 (20050412)
462  File doc/busses/i2c-nforce2: Update
463  File doc/chips/it87: Update
464  File doc/chips/lm90: Update for adt7461
465  File doc/chips/mic74: New
466  File etc/ New sections for lm92 and w83792d
467  Library: Add support for 2.6 fscpos driver (Stefan Ott)
468           Fix sis5595 in4 (Aurelien Jarno)
469           Add support for 2.6 gl520sm driver (Maarten Deprez)
470           Add support for 2.6 bmcsensors driver (Yani Ioannou)
471           Add support for w83792d (Chunhao Huang/Winbond)
472           Add support for 2.6 adt7461 (James Chapman)
473           Add support for 2.6 lm92
474           Add support for 2.6 vt1211
475           Add preliminary support for 2.6 w83627ehf
476  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
477            Use -fno-strict-aliasing on all architectures
478  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
479  Module bmcsensors: Fix compile error
480                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
481  Module ds1621: Fix detection (Aurelien Jarno)
482  Module eeprom: Discard SPD-centric checksum module parameter
483                 Cleanup detection function (backport from Linux 2.6)
484  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
485  Module i2c-i801: Temporarily disable broken I2C block read
486  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
487                   Gelato)
488  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
489  Module i2c-viapro: Prevent repeated resets
490  Module it87: Improve Super-I/O detection
491               Limit I2C address range
492               Support VID on the IT8712F
493  Module lm75: Only initialize CMP/INT bit
494  Module lm78: Fix bug with setting negative temperature limits
495  Module lm85: Properly differentiate between ADM1027 and ADT7463
496               Add EMC6D102 support
497  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
498               Add limited ADT7461 support
499  Module lm93: Fix IN10 (+5V) scaling
500  Module mic74: New
501  Module w83627hf: Support secondary Super-I/O address
502                   Enable temp2 and temp3 if they are disabled
503  Module w83781d: Revert AS99127F temp2 and temp3 computation change
504                  Skip final initialization step for AS99127F chips
505  Module w83792d: New (Chunhao Huang/Winbond)
506  Program ddcmon: New; user-space replacement for the ddcmon driver
507  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
508  Program isadump: Handle Super-I/O keys
509  Program lm_sensors.init: Cleanups (Axel Thimm)
510  Program Add basic command-line interface
511  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
512  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
513                     Don't complain about read-only enable files (lm85)
514                     Fix handling of alternate config file name
515  Program sensord: Fix erroneous error message (Aurelien Jarno)
516                   Support sis5595 in4 (Aurelien Jarno)
517                   Support w83627thf
518                   Support the separate it8712 prefix (Aurelien Jarno)
519  Program sensors: Display sis5595 in4 (Aurelien Jarno)
520                   No errors on missing pc87360 fans
521                   Add gl520sm support (Maarten Deprez)
522                   Improve vt1211 error/ignore handling (Michael Carland)
523                   Support w83792d, w83627ehf
524  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
525                          Improve IT8705F and IT8712F detection
526                          Improve udev detection
527                          Fix DS1621 detection
528                          Add W83627EHF detection
529                          Add ATI SMBus detection
530                          Add VT1211 alias detection
531                          Warn if chip modules not found
532                          Add i2c-ipmi to list if bmcsensors is on it
533                          Add PC87591 detection
534                          Search for correct udev db file name
535                          Add nForce3 250Gb and nForce4 detection
5382.9.0 (20041228)
539  NOTE: Requires i2c-2.9.0 or newer!
540  File README.thinkpad: Update
541  File doc/chips/it87: Cleanups
542  File doc/chips/lm63: New
543  File etc/ Set via686a voltage limits
544  File kernel/chips/ Resync module list with mkpatch
545  File kernel/include/sensors_compat.h: Define __devexit_p if missing
546                                        (kernels 2.4.16 and older)
547  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
548                             and dec_use removed in release 2.8.0
549  Modules (all chip drivers): Remove owner from i2c_driver; pass
550                              controlling_mod to i2c_register_entry() again
551  Module bmcsensors: Support function 1/x
552  Module i2c-amd756: Display the real bus name
553  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
554  Module i2c-i801: Support i2c block read (ICH5 and higher)
555                   Add PEC support for ICH6
556                   Add support for ICH7
557  Module i2c-ipmb: Remove from build since it doesn't work
558  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
559  Module icspll: Fix compilation
560  Module lm63: New driver for the National Semiconductor LM63
561  Module lm83: Use signed types for temperatures
562               Check limits on register writes
563  Module lm87: Round voltages properly
564               Retry on read errors (David Knierim)
565               Less agressive init (no reset)
566  Module lm90: Use signed types for temperatures
567               Check limits on register writes
568  Module lm93: Added module parameter for VID pin input thresholds.
569               Fix typo in dynamic VID alarms
570               Adds a couple log messages for failed transactions (David
571               Knierim)
572               Fix compilation breaking C99-ism (Axel Thimm)
573               Fix block read retries
574  Module pc87360: Support secondary Super-I/O address
575  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
576  Library: Add lm63 support
577           Add lpc47b397 support
578  Programs *.init: Rename lockfile to match file name
579  Programs i2cset, isaset: Written byte/word can be masked
580  Program Find eeproms on non-0 i2c bus too
581  Program mkpatch: Include i2c-amd756-s4882
582  Program pwmconfig: Handle new (well, back to old) pwm files names for
583                     Linux 2.6.10 and up
584  Program sensord: Do not scale load average (Aurelien Jarno)
585  Program sensors: Add lm63, lpc47b397 support
586                   Support DDR2 memory module EEPROMs (Rudolf Marek)
587                   Support only one location for the default configuration file
588                   Display the default configuration file location in --help
589                   Simplify the configuration file opening code
590  Program sensors-detect: Improve LM63 detection
591                          Discard IBM Thinkpad detection code
592                          Add PCA9556, LPC47B397, ICH7 detection
593                          Fix W83792D detection, add W83791SD detection
5962.8.8 (20041007)
597  File doc/donations: Update
598  File doc/lm_sensors-FAQ.texi: Add 4.6.1
599                                Update 4.7
600  File doc/chips/gl518sm: Update "iterate" info
601  File doc/chips/it87: Discard outdated module parameters
602  File doc/chips/lm75: LM77 is not supported
603  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
604  File doc/chips/lm93: New
605  File doc/chips/w83l785ts: Improvements
606  File etc/ Fix it87 lines order
607                            Update lm87 section
608  File kernel/include/sensors_vid.h: Support VRM 10.0
609  Library: Support 2.6 adm1025
610           Preliminary support for 2.6 lm87
611           Support 2.6 adm9240
612           Allow an alternative sysfs file name for chip features (2.6)
613           Fix lm83 critical limits (2.6)
614           Add lm93 support
615           Prevent some procfs errors from being silently ignored
616  Makefiles: Implement user_uninstall (Rudolf Marek)
617             Spoof LOGNAME and HOSTNAME when making html man pages
618  Module adm1025: Refine detection
619                  Update limit registers again (revert of 2.8.1)
620                  Init high limits if they read 0
621                  Fix conversions
622  Module lm75: Refine detection
623  Module lm78: Fix init
624  Module lm83: Default to kind lm83 if forced.
625               Fix temperature macros.
626  Module lm90: Add LM86, MAX6657 and MAX6658 support
627  Module lm93: New
628  Module mtp008: Fix the setting of limits on temp2
629  Module pca9540: Refine detection
630  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
631                  Support VID
632                  Fix fan_div file when fan count is less than 3
633                  Additional init and debug
634  Module smsc47m1: Fix pwm_enable being inverted
635  Module w83627hf: Add alternate VCORE/in0 calculation method
636                   Remove reset of chip by driver on initialization
637  Module w83781d: Fix default VRM for w83791d
638  Module w83l785ts: Implement read error handling (backport from 2.6)
639  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
640                    Wait for user input to continue (as opposed to 5 sec
641                    delay), can be skipped with -y
642                    Various cleanups and code refactoring
643                    Update manual pages
644  Program fancontrol.init: New (Dean Takemori)
645  Program Restore fans on many kinds of errors/interrupts
646  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
647                           (Giuseppe Della Bianca)
648  Program Detect devfs and refuse to run
649                    Use mknod's mode instead of chmod
650  Program mkpatch: Include xeontemp and pc87360
651  Program sensors: Rework adm1025 support
652                   Display pc87365/pc87366 VID
653                   Improve smsc47m1 support
654                   Hide 2.6 adm1027 alarm_mask being missing
655                   Print VRM version for all supported chips
656  Program sensors-detect: Support LM93, LM77, LM63
657                          Support PC8739x Super-I/O family (no sensors)
658                          Fix PCA9540 support
659                          Refine ADM1025/ADM1025A detection
660                          Refine LM75 detection
661                          Ignore missing /proc/modules (Andras Bali)
662                          Script-wide Perl cleanups
663                          Support udev
664                          Support W83792D, LM96000
6672.8.7 (20040611)
668  File README.thinkpad: Update 24RF08 status
669  File doc/fan-divisors: More info on accuracy
670  File doc/lm_sensors-FAQ.texi: Update 4.27
671  File doc/chips/adm1031: New
672  File doc/chips/max1619: New
673  File doc/chips/pc87360-fan: Renamed to pc87360
674  File doc/chips/pc87360: Big update
675  File doc/chips/w83781d: Update AS99127F documentation
676  File etc/ Add comments about BP6 voltages
677                            Add comment on Asus A7V8X-X VCore
678                            Misc fixes to lm80 section
679                            Update via686a section
680                            New lm99 section
681                            Add section for LM85-like chips
682                            Preliminary pc87366 section
683                            Add comment on GL520SM application modes
684                            Document beep_enable (Aurelien Jarno)
685                            Preliminary max1619 section
686                            Preliminary adm1030 and adm1031 sections
687  Library: Fix 2.6 VRM
688           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
689           Fully support the PC87360 family
690           Support the lm99
691           Add version and date strings
692           Support 2.6 max1619
693  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
694  Man page i2cdetect.8: document new command line flags
695  Man page i2cdump.8: More details on how i2cdump can write to a chip
696  Modules (all chip drivers): Rework memory allocation scheme.
697  Module adm1031: New (Alexandre d'Alton)
698  Module bmcsensors: Fix oops by creating thread for initialization
699  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
700  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
701          asb100.c, lm92.c: Use swab16
702  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
703  Module gl520sm: Less agressive initialization process
704                  Fix temp1 limits being unsettable in application
705                  Ensure that temp2 and in4 are not used at the same time
706  Module i2c-i801: Support 6300ESB and ICH6
707  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
708  Module i2c-sis645: Add support for SiS655
709  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
710  Module lm90: Support LM99 and LM89
711  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
712               Get rid of useless i2c_probe call
713  Module max1619: New (Alexey Fisher)
714  Module p4b_smbus: Add support for mobile versions of the 82801
715                    (Axel Thimm)
716  Module pc87360-fan: Renamed to pc87360
717  Module pc87360: Also support PC87365 and PC87366
718                  Add write support
719                  Correctly set the chip name depending on the type
720                  Add voltage and temperature support
721                  Fix fan speed computation
722                  Retrieve fans configuration from Super-I/O space
723                  Export pwm_enable (read-only)
724                  Honor pwm invert bits
725                  Clear fan alarms after we read them
726                  Do not read fan data when monitoring is disabled
727                  Do not include SENSORS_INSMOD stuff
728                  New module parameter: init
729                  Fan clock dividers change automatically
730                  Add thermistor dupport
731  Module smsc47m1: Lock on reads and writes
732                   Various PWM fixes
733  Module thmc50: Fix address range
734  Module via686a: Fix voltage roundings
735                  Simplify temperature conversions
736  Module w83781d: Drop PWM support for as99127f
737                  Invert AS99127F beep bits in driver rather than user-space
738  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
739  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
740  Program New
741  Program i2cdetect: Adapt probing method to address
742                     Add -q and -r flags to force probing methods
743                     Allow probing range selection
744  Program isadump: Major improvements
745  Program isaset: New
746  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
747                   module
748                   Include i2c-nforce2
749  Program sensord: New --rrd-no-average parameter
750                   Syncronize time slots with rrd
751                   Fix W83781D temp3 alarm (Aurelien Jarno)
752                   Add ASB100 support (Andrew May)
753  Program sensors: Fully support the PC87360 family
754                   Fix lm80 temperature alarms
755                   Support the lm99
756                   Do not invert AS99127F beep bits anymore
757                   Fix W83781D temp3 alarm (Aurelien Jarno)
758                   Print library version string
759  Program sensors-detect: Rework Super I/O detection
760                          Support SiS655/SiS96x
761                          Support ADT7461 and ADT7467
762                          Better support for ADM1027, ADT7460 and ADT7463
763                          Explicitly support ADM1028
764                          Scan all logical devices of PC87365 and PC87366
765                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
766                          Detect eeproms with software write protect (not
767                          enabled by default)
768                          Support ALi 1563 (2.6 only)
769                          Drop LTC1710 support
770                          Use byte reads for probing on ranges 0x30-0x37 and
771                          0x50-0x5F
772                          Improve LM89 and LM99 support
773                          Support GeForce FX 5900 video cards
774                          Fix devfs misdetection (Aurelien Jarno)
775                          Detect 6300ESB, ICH6
776                          Fix double detection of ISA chips
777                          Support MAX1619
778                          Support PC87373 Super-I/O
779                          Fix unknown adapters appearing multiple times
780                          Refine MAX6650/MAX6651 detection
7832.8.6 (20040405)
784  File README.thinkpad: Update status
785  File doc/chips/pca9540: New
786  File doc/chips/pc87360-fan: New
787  File etc/ Update pcf8591 default configuration
788  Library: Switch to new sysfs naming standard
789           Fix gcc 3.3 warnings (Philipp Thomas)
790           Support 2.6 ds1621 and pcf8591
791           Change pcf8591 magnitudes
792           Support pc87360-fan
793  Makefile: Install shared library 755
794  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
795  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
796  Modules ds1621, pcf8591: Check for capabilities before using them
797                           (Aurelien Jarno)
798  Modules pcf8574, pcf8591: Cleanups
799  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
800  Module adm1021: Better detection and initialization
801  Module pca9540: New driver for the Philips PCA9540
802  Module pc87360-fan: New driver for the National Semiconductor PC87360,
803                      PC87363 and PC87364 Super I/O chips
804  Module smsc47m1: Support the LPC47B27x
805  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
806  Program i2cdetect: Skip special addresses by default
807  Program sensord: Prevent null pointer dereference (Tim Toohey)
808  Program sensors: Print the degree symbol in the terminal's current locale
809                   (Aurelien Jarno)
810                   Update pcf8591 print to support 2.6 driver
811                   Support pc87360-fan
812  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
813                          Improved SiS chips support
814                          Add a white list of IBM systems
815                          Drop support of undetectable adapters
816                          Fix smart battery detection
817                          Add smart battery charger and manager detection
818                          Rework adm1021 and clones detection
819                          The PC87360, PC87363 and PC87364 Super I/O chips
820                          now have a (preliminary) driver
821                          Rework Super I/O detection
822                          Better support of devfs
823  Program New
8262.8.5 (20040305)
827  File doc/chips/SUMMARY: Update
828  File etc/ Epox 8K3A tweaks. (Kronos)
829  Makefiles hotplug and rrd: Remove -o and -g arguments to install
830  Module bmcsensors: Increase max SDRs to 100
831  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
832  Module i2c-amd756: Don't register driver to avoid driver conflicts.
833                     (Daniel Rune Jensen)
834  Module it87: Better temperature sensor types handling (Takeru Komoriya)
835               Fix reset=1 (Takeru Komoriya)
836  Module lm80: Code cleanups
837  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
838  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
839  Module w83627hf: Add w83637hf support
840                   Fix exported name
841                   Fix PWM in w83627thf
842                   Preserve other bits when forcing temp2/3 to comparator mode
843  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
844                  Remove asb100 support
845  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
846          Define driver ID if i2c-id.h doesn't have it yet.
847  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
848          Backport oops fix from Linux 2.6.
849  Modules (all chips): Get rid of useless headers
850  Program Add sysfs support
851  Program sensors: Add w83637hf support
852                   Add support for Shuttle Ethernet EEPROMs
853                   Drop 2.6 subclient detection
854  Program sensors-detect: Add heuristics to the LM80 detection function
855                          Add support for W83L785R, improve W83L784R/AR
856                          Add GeForce FX 5600 as supported by rivatv
857                          More Super IO chips, better handling
858  Library: Update to match renames in fscher
859           Reverse temporary changes to w83l785ts mappings
860           Fix vt1211 and vt8231 uch_config not being writable
861           Add 2.6 lm80 support
862           Add w83637hf support
863           Remove in6 and temp1 from vt1211 and vt8231
864           Add support for Shuttle Ethernet EEPROMs
865           Remove unused as99127f features
8682.8.4 (20040207)
869  File doc/lm_sensors-FAQ.texi: Update 4.20.
870  File doc/chips/it87: Change hyst to low
871  File doc/chips/w83l785ts: New
872  File etc/ Change it87 hyst to low
873                            Fix w83697hf supposed to have temp3
874                            Limits initialization for adm1025/ne1619
875                            Handle fscher voltage conversions
876                            Add Tyan Trinity S2495 KT400 setup (Eric
877                              Schumann)
878                            Fix fscher fan labels (Reinhard Nissl)
879  Library: Better 2.6 eeprom support
880           Change it87 hyst to low
881           Add 2.6 gl518sm, fscher support
882           Fix 2.6 negative voltages handling
883           Temporary fix to w83l785ts mappings
884  Module adm1025: Separate prefix for NE1619
885  Module adm1026: Remove use of temporary ID
886                  Define addresses as a range
887  Module bmcsensors: Fix reservations
888  Module fscher: Externalize voltage conversions
889  Module eeprom: Remove memtype
890  Module i2c-piix4: Fix resource release error
891                    Various cleanups
892  Program Add sysfs support
893  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
894                   Drop linux 2.2 support
895                   Add w83627hf
896  Program sensors: Do not show algorithm by default
897                   Cleanup temperature unit display code
898                   Cleanup label spacing code
899                   Fix output to UTF-8 terms (Marcel Sebek)
900                   Simplify gl518sm print
901                   Do not ignore errors in FSC chips prints
902                   Fix w83l785ts print
903                   Cleanup FSC chips prints
904  Program sensors-detect: Fix PATH issues
905                          Correctly point to the fscher driver
9082.8.3 (20040115)
909  File lm_sensors.spec: Update
910  Library: Add 2.6 eeprom, lm90 support
911           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
912  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
913  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
914  Module i2c-amd756: Fix byte writes
915  Module i2c-tsunami: Cleanups (Daniel Nilsson)
916  Module it87: Fix sg_tlx writes; fix sensor type reporting;
917               add 8712 Super I/O detection;
918               remove initialization of temp_type and fan_ctl;
919               remove init and temp_type module parameters
920  Module lm90: Handle hysteresis differently
921  Module smartbatt: Fix detection, magnitudes, temp
922  Module w83781d: Fix negative voltages
923  Module w83l785ts: New
924  Program eeprog: Make 8 bit mode the default
925  Program fancontrol: Improvements, fixes, support 2.6 kernels
926  Program mkpatch: Add lm75.h
927  Program pwmconfig: Improvements, fixes, support 2.6 kernels
928  Program sensors: Add ASB100 support
929  Program sensors-detect: Add 8712 Super I/O detection;
930                          add W83L785TS detection
9332.8.2 (20031211)
934  IMPORTANT: Limit initialization removed from all chip drivers!
935             If you didn't run 'sensors -s' in the past you may need to now!
936  File Change lm75 scaling back to 1;
937                        Add example for asb100
938  Library: Fix bmcsensors scaling, increase number of sensors;
939           Add w83627thf support; Advance version to 3.0.0;
940           Add hermes, ADM1032, ASB100 support;
941           Add it87 sensor type support;
942           Add sysfs support for kernel 2.6;
943           Fix memory leaks
944  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
945             Fail if no kernel .config file exists;
946             Don't build module dependencies for user and user_install
947  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
948          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
949          smsc47m1, thmc50, via686a, w83627hf, w83781d:
950          Remove initialization of limits by driver.
951  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
952  Modules (chip): Init cleanups
953  Module asb100: New
954  Module bmcsensors: Fix voltage scaling, voltage and fan limits
955  Modules ddcmon, eeprom: Add failure printks
956  Module fscher: New (Fujitsu-Siemens Hermes driver)
957  Module i2c-amd756: Fix AMD8111 support
958  Module i2c-amd8111: Fix byte writes
959  Module i2c-nforce2: Fix byte writes
960  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
961  Module i2c-sis630: Sync with 2.6.0-X driver version
962  Module i2c-viapro: Add support for Via 8237
963  Module it87: Add pwm and "smart guardian" support;
964               add it87 sensor type support
965  Module lm75: Fix negative voltages
966  Module lm90: Add ADM1032 support
967  Module w83781d: Fix 791d and 627hf detection
968  Module w83627hf: Add VID support
969  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
970  Program eeprog: New
971  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
972                                       support sysfs for i2c bus search
973  Program i2cdetect: Add -l option to list busses
974  Program i2cdump: Add 'c' mode for consective address reads
975  Program mkpatch: Cleanups
976  Program pwmconfig: Handle multiple fans controlled by a single pwm
977  Program sensord: Remove ddcmon support
978  Program sensors: Add ADM1032 support; add messages for sysfs
979  Program sensors-detect: Prefer Super I/O drivers;
980                          Fix W83627HF and W83791D detection; detect CSB6;
981                          Detect ADM1029, ADM1030, ADM1031;
982                          Detect W83637HF, W83697UF;
983                          Add it87 sensor type support; add sysfs support
984                          Reduce lm80 misdetects; remove PCFxxxx "detection"
985                          Detect VT8237 (KT600)
986                          Use VPD instead of DMI+ACPI for Thinkpad detection
987                          Suggest new asb100 driver instead of w83781d
9902.8.1 (20031005)
991  NOTE: Requires i2c-2.8.1 or newer!
992  File Improved adm1025 section
993                        Default temp labels for as99127f
994                        Improved lm83 section
995                        Better support for Asus A7V8X-X
996  File doc/chips/SUMMARY: Add SMSC manufacturer ID
997  File doc/chips/adm1025: Add decent documentation (almost new)
998  File doc/chips/lm83: Known motherboards list update, misc updates
999  Library: Change adm1025 names (hyst/over become low/high)
1000           Swap adm1025 temp1 and temp2 to match the driver's order
1001           Advance version to 2.0.1
1002           Update lm83 support
1003           Add support for lm90, xeontemp, max6650
1004           Add separate messages for read and write errors
1005           Add missing message for parse error
1007  Modules (various): Fix includes for compilation on Alpha
1008                     Use the new i2c_delay function instead of the various
1009                     do_pause functions
1010  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
1011  Module i2c-nforce2: Cleanups
1012  Module i2c-i810: Use readl/writel for portable access to PCI memory
1013  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
1014  Module i2c-savage4: Use readl/writel for portable access to PCI memory
1015  Module i2c-sis630: Fix detection
1016                     Add block data read/write support
1017  Module i2c-sis645: Detection method change/bugfix
1018  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
1019  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
1020  Module adm1025: Major driver update
1021                  Add support for Philips NE1619
1022                  Simplify the driver a lot (unified voltages, unified
1023                  temperatures and much more)
1024                  Fix default voltage limits
1025                  Change default temperature limits
1026                  Swap remote and local temperatures to match the internal
1027                  registers order (make the code unification possible)
1028                  Export remote diode fault through alarms
1029  Module ddcmon: Major update
1030                 Add half a dozen new features
1031                 Add checksum parameter (same as for the eeprom module)
1032                 Fix monitor limits
1033  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
1034  Module lm78: Fix a fan_div/fan_min bug
1035  Module lm83: Add t_crit and alarms support
1036  Module lm90: New
1037  Module max6650: New
1038  Module saa1064: New
1039  Module smsc47m1: Add support for 47M142
1040  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1041                   enhance w83627thf support
1042  Module w83781d: Enhance chip detection; clean up error returns;
1043                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1044  Module xeontemp: New
1045  Program Add Direct Rambus (DRDRAM)
1046                           Mark Rambus as unsupported
1047  Program New
1048                          Interfaces between our eeprom module and
1049                          parse-edid from the read-edid project
1050  Program p4b_smbus: Fix SMP compilation
1051  Program sensord: Add support for IT87 (Mike Black)
1052                   Change ADM1025 support to match the changes made to
1053                   the library
1054  Program sensors: Rewrite and enhance EEPROM support
1055                   Change LM83 and ADM1025 support to match the changes
1056                   made to the library
1057                   Add DRDRAM support to print_eeprom
1058                   Exit(1) on /proc write failure (Malte Starostik)
1059                   Add LM90, MAX6650 support
1060  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1061                          Add support for LM82, LM86, LM89
1062                          Improved W83781D family detection
1063                          Add support for AS19927F rev.2, ASB100 Bach
1064                          Add support for Asus Mozart-2 (3 types)
1065                          Add support for NE1619
1066                          Add support for FSC Hermes
1067                          Make sure /sbin is in the user's path
1068                          Fix EEPROM detection
1069                          Automatic module.conf and /dev/i2c* detection
1070                          Improve LM82 and LM83 detection
1071                          Handle "to-be-written" cleanly
1072                          Add detection for 47M14x Super I/O
1073                          Handle the one-address-many-chips-same-driver
1074                          case
10772.8.0 (20030714)
1078  NOTE: Requires i2c-2.8.0 or newer!!!
1079  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1080                  2.4.13 or later required for mkpatch.
1081  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1082                  i2c package
1083  File doc/chips/fscscy: Add watchdog documentation
1084  File Fix vt1211/vt8231 thermistor calculations
1085  File sensors.h: Now automatically generated
1086  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1087           add adm1026, lm83, lm85, w83791d support;
1088           Advance version to 2.0.0
1089  Makefiles: Generate warnings if new library won't be found by;
1090             Modules now install in kernel/drivers/i2c/[busses,chips];
1091             Ensure that headers in /usr/local/include are used first;
1092             Don't use /usr/include headers for modules;
1093             Handle multiple UTS_RELEASE definitions in linux/version.h;
1094             Automatically generate kernel/include/sensors.h;
1095             Remove old gzipped modules; remove old misc directory if empty;
1096             Remove pre-2.4 installation method;
1097             -Wall now the default;
1098             Add new targets user, user_install, and help;
1099             Run depmod after module installation
1100  Modules (all): Cleanups including
1101                - Add #include <i2c-proc.h>
1102                - C99 initializers
1103                - Remove #ifdef MODULE
1104                - Remove #ifndef THIS_MODULE
1105                - Remove #ifndef MODULE_LICENSE
1106                - Remove other 2.1/2.2 #ifdefs
1107                - Remove #include "sensors.h", copy SYSCTL defs to module
1108                - Remove excess #includes
1109                - Remove argument in i2c_register_entry()
1110                - Remove dummy xxx_command() definition
1111                - Remove EXPORT_NO_SYMBOLS
1112                - Remove init_MUTEX #define
1113                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1114                  no longer adjust their own refcounts
1115                - Use module_init() and module_exit()
1116                - Update to new i2c_driver struct definition
1117  Modules (bus PCI): Convert to PCI-module-style initialization
1118  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1119  Module adm1021: Set alarm on failed reads and report old value;
1120                  merge changes from kernel 2.5.54
1121  Module adm1026: New
1122  Module bmcsensors: Fix compile when DEBUG=1
1123  Modules ddcmon, eeprom: Use i2c block reads if possible;
1124                          better error handling
1125  Module ds1307: Add to Makefile
1126  Module gl520sm: Fix temperature over/hyst writes
1127  Module lm75: merge changes from kernel 2.5.54
1128  Module lm83: New
1129  Module lm85: New
1130  Module i2c-ali1535: Check for invalid transaction
1131  Module i2c-ali15x3: Check for invalid transaction
1132  Module i2c-amd756: merge changes from kernel 2.5.54;
1133                     check for invalid transaction
1134  Module i2c-amd8111: merge changes from kernel 2.5.54
1135  Module i2c-i801: Add support for 82801EB (ICH5)
1136  Module i2c-i810: Fix for some chips
1137  Module i2c-nforce2: New
1138  Module i2c-piix4: Check for invalid transaction
1139  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1140  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1141        north bridges; SiS962 and SiS963 south bridges
1142  Module i2c-viapro: Check for invalid transaction
1143  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1144          pwm and pwm enable support; update docs
1145  Module smbus-arp: Check adapter for HW or SW PEC support;
1146                    add reset option
1147  Module w83781d: Add support for w83791d
1148  Module w83627hf: New
1149  Program Recognize DDR and Rambus
1150  Program eeprom: Fix writes for small eeproms
1151  Program eeprom, eepromer: Use local i2c-dev.h for build
1152  Program fancontrol: New
1153  Program lm_sensors.init: Call sensors -s in start()
1154  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1155                   Add adm1026,lm85 support;
1156                   Remove sensors.c file; add sensors_compat.h;
1157                   Remove patches to i2c-core.c and drivers/char/mem.c;
1158                   Now works only for kernels 2.4.13 or later
1159  Program p4b_smbus: Fix 'make install';
1160                     Install in same place as other modules;
1161                     Clear correct bits in config word
1162  Program pwmconfig: New
1163  Program sensors: add adm1026, lm85, w83791d support
1164  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1165                          w83627hf, w83627thf, w83697hf);
1166                          Add support for SiS651, SiS961, SiS745, SiS746;
1167                          Support dmidecode 2.0 and later;
1168                          Fix "C" format error;
1169                          Add support for adm1026, 82801EB (ICH5), W83791D;
1170                          Add support for w83l785ts, nForce2;
1171                          Fix UTF-8 incompatibility;
1172                          Better support for lm75;
1173                          Add support for lm83
11752.7.0 (20021208)
1176  NOTE: Requires i2c-2.7.0 or newer.
1177  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1178  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1179  File doc/busses/i2c-sis645: Add license
1180  File doc/chips/lm92: Add license, features
1181  File doc/chips/maxilife: Add license, parameters, features
1182  File doc/chips/smartbatt: Complete rewrite
1183  File doc/chips/vt8231: Add license, parameters
1184  File Add section for lm75; complete the lm78 section
1185  Library: Add support for MC1066; add multiple VRM version support for lm87;
1186           enhance adm1023 support; initial support for Sony Vaio eeprom;
1187           add support for bmcsensors; add hacks for additional dummy drivers
1188  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1189            add flags for x86_64 compiles
1190  Module adm1021: Add support for MC1066
1191  Module bmcsensors: New
1192  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1193                   kernel 2.5.43; fix 2.2 kernel compiles
1194  Module gl518sm: Iterate allowed only for rev 0x00
1195  Module i2c-amd756: Configure base address for nForce support;
1196                     check for uninitialized base address;
1197                     add support for amd8111 (SMBus 1.0)
1198  Module i2c-amd8111: New (SMBus 2.0)
1199  Module i2c-ipmb: New
1200  Module i2c-ipmi: New
1201  Module i2c-keywest: Sync with kernel 2.4.20
1202  Module i2c-sis630: Add support for SiS730
1203  Module i2c-sis645: Improve support for SiS645/961;
1204                     add support for SiS645DX/961 and SiS735;
1205                     fix 2.2 kernel compiles
1206  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1207  Module lm87: Add multiple VRM version support
1208  Module vt1211: Fix inx limits and alarms; fix in0
1209  Module vt8231: Fix inx limits and alarms; fix in0
1210  Module w83781d: Fix in0/in1 initialization
1211  Module smartbatt: New
1212  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1213  Program Code cleanup; valid HTML; better HTML output;
1214                           stop decoding on checksum error
1215  Program dmidecode: Fix read bug; upgrade to version 1.8
1216  Program doc-insmod: Complete rewrite; fix author output
1217  Program doc-features: Complete rewrite; handle missing sysctl entries;
1218                        handle unknown prefix with suggestion
1219  Program lm_sensors.init: Remove spaces bug; add green/red output
1220  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1221  Program rrd: Add sanity limits to newly-created RRD.
1222  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1223  Program sensors: Add support for MC1066, Rambus Rimms;
1224                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1225                   initial support for Sony Vaio eeprom
1226  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1227                          IPMI, AMD8111; add help if no sensors found;
1228                          add ACPI method for IBM system detection;
1229                          work with old Perl versions again;
1230                          initial support for Sony Vaio eeprom
12322.6.5 (20020915)
1233  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1234  File Fix temp[23] for as99127f; add vt8231
1235  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1236  Module dmi_scan: new
1237  Module ds1621: Fix enable/disable
1238  Module eeprom: Do not corrupt 24RF08's when checksum=1
1239  Module i2c-i801: Check for uninitialized base address;
1240                   enable if not enabled
1241  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1242  Module i2c-sis630: new
1243  Module i2c-sis645: new
1244  Module lm92: Fix in-kernel initialization
1245  Module via686a: Remove VT8231 support
1246  Module vt8231: new
1247  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1248  Program dmidecode: new
1249  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1250  Program mkpatch: Add entries for, lm92,
1251                   pcf8574, pcf8591, smsc47m1, vt1211;
1252                   add dmi_scan
1253  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1254  Program lm_sensors.init: fix stop()
1255  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1256                   add support for logging loadavg in RRD;
1257                   fix down-converting raw labels for RRD;
1258                   update chip support, still behind sensors
1259  Program sensors: Add /usr/local/etc to config file path;
1260                   fix -c and -u flags; add vt8231
1261  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1262                          refuse to run on IBM systems;
1263                          fix sysconfig module numbering;
1264                          change quick write to not corrupt 24RF08's
12662.6.4 (20020719)
1267  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1268  File doc/vid: New
1269  File include/sensors_vid.h: New
1270  File Add vt1211, smsc47m1
1271  Library: Add multiple VRM version support for adm1025, w83781d;
1272           fix 'flex scanner jammed' on some systems;
1273           add vt1211, smsc47m1, lm92;
1274           fix access mode checking
1275  Makefiles: For 2.4+ kernels, modules now install in
1276             kernel/drivers/[i2c,sensors] , not misc/ , and
1277             'make install' removes old versions in misc/ .
1278             Use $CFLAGS and $CPPFLAGS if defined.
1279  Module adm1025: Add multiple VID version support
1280  Module ds1307: new
1281  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1282                     reliability improvements
1283  Module i2c-hydra: Flush posted writes
1284  Module i2c-i801: Add support for 82801DB (ICH4)
1285  Module i2c-i810: Flush posted writes
1286  Module i2c-savage4: new
1287  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1288  Module i2c-voodoo3: Flush posted writes
1289  Module ds1307: New
1290  Module lm92: New
1291  Module smbus-arp: new
1292  Module smsc47m1: new
1293  Module via686a: Add support for VT8231 sensors
1294  Module vt1211: new
1295  Module w83781d: Add multiple VID version support; fix temp alarms
1296  Program eeprom: new
1297  Program i2cdump: Add smbus block command specification, add PEC support
1298  Program lm_sensors.init: new
1299  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1300                   pcf8574, pcf8591, smsc47m1, vt1211
1301  Program p4b_smbus: Add support for ICH4
1302  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1303  Program sensord.init: Renamed, was prog/init/sensors
1304  Program sensord: Major update, now requires rrd source;
1305                   not compiled by default
1306  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1307                   (don't display algo. and adap.) option;
1308                   add vt1211, smsc47m1, lm92
1309  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1310                          add 82801DB, LM85; fix perl warnings;
1311                          generate /etc/sysconfig/lm_sensors for
1312                          lm_sensors.init script
13142.6.3 (20020322)
1315  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1316  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1317  File doc/chips/it87: add more temp_type help
1318  File Un-ignore it87 in8, temp3, fan3;
1319                        add adm1021 section; add lm87 AIN[1,2] template;
1320                        swap negative voltage limits for 782d,783s,627hf,
1321                        697hf,it87; add more it87 help; swap neg. voltage
1322                        limits for lm78(-j), lm79, w83781d, as99127f
1323  Library: Add PCF8591, W83697HF, ADM1023 support;
1324           fix w83* fan_min computes;
1325           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1326  Module adm1024: Add MODULE_LICENSE("GPL")
1327  Module bt869: Add s-video out and DVD resolution support
1328  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1329  Module fscscy: implement min/max for voltages and fans
1330  Module i2c-amd756: Add support for AMD768
1331  Module i2c-i810: Add support for 810E
1332  Module i2c-keywest: Big update, sync with kernel 2.4.18
1333  Module i2c-piix4: Check for uninitialized base address
1334  Module i2c-sis5595: Blacklist 645, 735
1335  Module i2c-viapro: Check for uninitialized base address
1336  Module gl518sm: Standardize /proc entries in0-3
1337  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1338               fan -> fan1; fix temp2 limit writes
1339  Module pcf8574: Add support for PCF8574A; /proc interface changed
1340  Module pcf8591: new
1341  Module sis5595: Blacklist 645, 735
1342  Module w83781d: Add W83697HF support; allow force_subclients parameter
1343                  for Tyan 2460
1344  Programs, Update for new /proc names
1345  Program new
1346  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1347                   add text output
1348  Program init/sensors: New SysV init script
1349  Program Add support for fscscy, add more help entries
1350  Program p4b_smbus: new
1351  Program rrd: Install summ_week.cgi
1352  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1353                   clean up chassis intrusion prints
1354  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1355                          fix Via686a and it87 detection;
1356                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1357                          fix uninitialized values; it87 beats lm78
13592.6.2 (20011118)
1360  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1361  Chip Modules (all): malloc.h -> slab.h
1362  Modules (all): Add MODULE_LICENSE("GPL")
1363  File doc/FAQ: More updates and additions
1364  File Fix it87 in5,in6 (-12,-5) calculations
1365  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1366           update it87 alarm ID's.
1367  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1368  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1369  Module i2c-amd756: Improve busy handling/printk's
1370  Module i2c-i801: Add 82801CA/CAM support
1371  Module i2c-keywest: Sync with PPC people, it works now
1372  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1373  Module i2c-viapro: Add Via VT8233 support
1374  Module it87: Merge alarm_* /proc entries to alarms
1375  Module sis5595: Fix support for rev B0
1376  Module via686a: Make limit initializations reliable
1377  Module w83781d: Allow init=0 parameter to bypass initialization
1378  Program isadump: Add flat address space (PCI) support
1379  Program Add support for i2c-ali1535, adm1024, ds1621,
1380                      fscpos, it87, maxilife, mtp008
1381  Program sensors: Fix w83781d temp precision
1382  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1383                          Fujitsu Poseidon and Scylla,
1384                          Intel 82443MX and 82801CA/CAM detection,
1385                          add ITE 8172G detection (driver in kernel 2.4.10)
13872.6.1 (20010830)
1388  File BUGS: Updated
1389  File doc/FAQ: More updates and additions
1390  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1391  File Fix/enhance it87 section
1392  Library: ds1621 and it87 updates
1393  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1394  Module i2c-amd756: Add AMD 766 support
1395  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1396  Module i2c-piix4: Add Serverworks CSB5 support
1397  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1398  Module adm1025: Fixed temp2 min/max writes
1399  Module ds1621: Add 12-bit precision mode
1400  Module it87: Enable all alarms, add in8 support, add sensor type selection
1401  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1402                  remove support for module
1403  Module sis5595: Recognize unsupported chips and refuse to load
1404  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1405  Program eepromer: new
1406  Program Fix dependencies on i2c-proc; disallow compilation
1407                      of sensors.c as a module in kernel
1408  Program sensors: it87 updates; adjust temp. precision for some chips
1409  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1410                          recognize unsupported SiS chips;
1411                          recognize AMD 766 and Serverworks CSB5.
14132.6.0 (20010612)
1414  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1415        If your make fails because it can't find <linux/i2c-proc.h>, you
1416        forgot this step!!!
1417  File doc/FAQ: Many, many updates and additions
1418  File doc/busses/i2c-sis5595: new
1419  File doc/busses/i2c-tsunami: new
1420  File doc/chips/it87: new
1421  File doc/chips/via686a: Claim support for 686b.
1422  File README.thinkpad: new
1423  File Adjust as99127f in5 (-12V) and temp2 calculations;
1424                        Add lm87, adm9240, ds1780, lm81 templates;
1425                        Enhance help comments in file;
1426                        Add Tyan S2510 dual-MTP008 example;
1427                        Make separate sis5595 section.
1428  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1429  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1430  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1431           Add support for maxilife-nba and amd1024;
1432           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1433  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1434  Chip Modules (all): Change from sensors_* to i2c_* globals
1435                      for new i2c-proc.[ch]
1436  Makefiles: enhance to support Alpha architecture
1437  Module adm1021: Fix lm84 and gl523sm support
1438  Module adm1024: new
1439  Module i2c-i801: Chip detection cleanup
1440  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1441  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1442  Module i2c-tsunami: New
1443  Module i2c-via: Ensure i2c bus is tristated correctly.
1444  Module it87: new driver for IT8705, IT8712, Sis950 chips
1445  Module lm78: Recognize chipid=0x20
1446  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1447  Module mtp008: Fix temp initializations;
1448                 Save BIOS pin configuration of temps and fans;
1449                 Fix sensor type reads/writes and fan min writes;
1450                 Fix spurious invalid sensor type messages
1451  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1452                  used for patched kernel now.
1453                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1454  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1455                  Allow force_addr=0xaddr
1456  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1457  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1458                  reading changes; Add messages for subclient
1459                  registration failure
1460  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1461  Program i2cset: new
1462  Program isadump: fix for Alpha arch. compiles
1463  Program Fix adm9240 typos; Add more chips to;
1464                      Remove ltc1710; Fix i2c_sis5595 typo;
1465                      Support kernel 2.4.5 makefile change;
1466                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1467  Program sens_update_rrd: new
1468  Program sensord: Add -d (debug) and -p (pid-file) options
1469  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1470                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1471                   Change mtp008 temps from max/min to limit/hyst;
1472                   Add maxilife-nba, adm1024, it87 support.
1473  Program sensors-detect: Recognize lm78 with chipid=0x20;
1474                          Recognize SMSC Victory66 South Bridge;
1475                          Add devfs /dev/i2c/x support;
1476                          Add adm1024, it87xx support; Add thinkpad warning.
1477  Program tellerstats: new
14792.5.5 (20010115)
1480  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1481        you have kernel 2.4.0-prerelease or greater.
1482  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1483  File doc/developers/proc: new
1484  File Add mtp008 entries, adm1025 entries
1485  Library: Add ds1621, mtp008 support
1486  Module adm1021: Add support for adm1021a / adm1023
1487  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1488  Module adm1025: Add support for remote temp; rename /proc entries to
1489                  in[0-5] and temp[1-2]; fix negative temp readings
1490  Module adm9240: Rename /proc entries to in[0-5]
1491  Module ddcmon: allow force and force_ddcmon parameters
1492  Module ds1621: new
1493  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1494  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1495  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1496  Module lm87: cleanup, update voltage calculations
1497  Module mtp008: new
1498  Module pcf8574: change update time to 5 seconds
1499  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1500  Module w83781d: fix beep setting via /proc
1501  Programs editticket, readticket: new
1502  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
1503  Program more fixes; now adds many more modules
1504  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1505                   add adm1025 temp2; report temp limits correctly as
1506                   min/max or limit/hysteresis; print message if no
1507                   sensors are found. Removed false errors from lm87 reads.
1508  Program sensors-detect: Add ds1621, mtp008 detection;
1509                          add ServerWorks detection
15112.5.4 (20001012)
1512  Module i2c-viapro: Add support for Via 596B (0x3051)
1513  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1514  Program fixed infinite loop
1515  Program sensors-detect: Detect Via 596B (0x3051)
15172.5.3 (20001008)
1518  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1519  File useful_addresses.html: update
1520  Library: Add lm87 support
1521  Module pcf8574: new
1522  Module i2c-ali1535: new
1523  Module i2c-ali15x3: removed force #ifdef.
1524  Module i2c-i801: support Intel 82801BA (815E chipset)
1525  Module i2c-i801: add i2c block write support, fix smbus block bugs
1526                   (requires i2c 2.5.3 package)
1527  Module i2c-i810: support Intel 82815
1528  Module lm87: new
1529  Module sensors: Fix for kernel 2.4.0-test8
1530                  (remove copy_to_user_ret and put_user_ret)
1531  Module w83781d: limit fan divisors to 8 max. for as99127f
1532  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1533  Program i2cdump: Add smbus block read support
1534  Programs i2cdetect, i2cdump: Improve error reporting
1535  Program sensors: new switch -u (--unknown)
1536  Program sensors-detect: detect Intel 82801BA (815E chipset)
1537  Program sensors-detect: detect Intel 82815
1538  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1539  Program sensors-detect: detect National LM87
1540  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1541  Program sensors-detect: Improve error reporting
15432.5.2 (20000709)
1544  File Fix lm80 in8 calculation
1545  Module w83781d: W83783S no longer crashes on unloading
1546  Program sensors-detect: more robustness in case of unknown i2c adapters
1547  Program sensors-detect, libsensors: fix eeprom size reporting
1548  Program sensord: more flexibility, support for alarm scanning etc.
1549  Program sensors: support for ignore setting on sensor alarms.
1550  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
15522.5.1 (20000618)
1553  Library: Add adm1025 support
1554  Module adm1025: new
1555  Module ddcmon: Fixed bus scan which could hang SMBus
1556  Module i2c-keywest: new
1557  Module maxilife: Add support for Maxilife '99 (NBA)
1558  Module via686a: Enable sensors if not enabled by BIOS
1559  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1560  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1561  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1562  Module w83781d: Fis as99127f fan speed (was 66% too high)
1563  Module w83781d: Improve beep input checking
1564  Program i2cdump: Add Winbond-style bank selection
1565  Program isadump: Add Winbond-style bank selection
1566  Program sensors: Add adm1025 support.
1567  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1568  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1569  File Add Maxilife '99 entries
1570  File Remove some as99127f entries.
1571    Note: For as99127f, reinstall manually (make install
1572          won't reinstall it) or else 'sensors -s' will fail.
15742.5.0 (20000312)
1575  Dropped all kernel 2.0 and 2.1 compatibility
1576  Module i2c-i810: new
1577  Module ddcmon: new
1578  Module via686a: new
1579  Module i2c-amd756: fixed region request
1580  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1581  Module w83781d: Don't change pin settings at initialization;
1582                  also fix chip detection.
1583  Library: Support for ddcmon and via686a
1584  Program sensors-detect: Support for ddcmon and via686a
1585  Program sensors: Support for eeprom, ddcmon and via686a
15872.4.5 (20000116)
1588  Introduced DESTDIR installation prefix
1589  Module lm80: fixes, temperature now read and set correctly
1590  Module i2c-voodoo3: driver enhancements
1591  Module w83781d: fixes, AS99127 works much better now
1592  Library: New ignore keyword in config file
1593  Programs: Support for new ignore keyword
1594  Program sensors-detect: Support for MGA detections
15962.4.4 (19991201)
1597  Addition of the alpha release of AMD 756 SMBus host support.
1598  Many fixes and updates to the gl518sm driver
1599  Updates and fixes for device detection
16012.4.0 (19990920)
1602  Too much to list.
1603  i2c and smbus parts are split off to a separate i2c package.
1604  New drivers and other stuff.
16062.3.4 (19990616)
1607  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1608  All: Now compiles against kernel 2.0.x (again ;)
1609  Module gl518sm: some updates and refinements
16112.3.3 (19990603)
1612  All: Now compiles against kernel 2.3.x (x >= 1)
1613  Module i2c-voodoo3: Timing issue fixes
1614  Module bt869: Seems to be functional and relatively well tested
1615  Many modules were modified to be more compatible with the new
1616   Mutex structure in the new experimental kernels.
16182.3.2 (19990507)
1619  Module i2c-hydra: Now compiles on 2.0.x kernels
1620  Module i2c-lm75: Slightly better detection
1621  * New, but not compiled by default:
1622  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1623  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
16252.3.1 (19990501)
1626  All: Now compiles on PPC
1627  Module i2c-hydra: NEW
1628  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1629  Module w83781d: Removed deadlock (mutex was not initialized)
1630  Documentation: A few glitches removed
1631  Makefile: default module installation directory is now
1632            /lib/modules/current/extra/misc
1633  Program sensors-detect: PPC Hydra now detected
1634  Program sensors: Now prints complete GL518SM information
1635  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
16372.3.0 (19990422)
1638  All: Many, many changes and improvements
1639  All: Many small bugs and problems removed
1640  Modules: New insmod parameters
1641  Modules: Much improved chip detection
1642  Module maxilife: NEW
1643  Module adm1021: MAX1617A now also supported
1644  Module adm9240: DS1780 now also supported
1645  Module w83781d: W83782D and W83783S now also supported
1646  Program sensors-detect: NEW
1647  Library: All chips now supported
1648  Documentation: Very much improved
16502.2.2 (199903??)
1651  Just some minor updates and bug fixes.
16532.2.1 (19990218)
1654  All: Removed compile warnings
1655  Module i2c-dev: Small bug removed if DEBUG=1 was used
1656  Module sis5595: Now compiles for 2.0 kernels
1657  Module adm1021: Detection corrected
16592.2.0 (19990216)
1660  All: Set copyrights to include 1999
1661  All: Small bugfixes
1662  I2C: Upgraded to newest archive of Simon Vogl
1663  Module i2c-dev: NEW
1664  Module i2c-ali15x3: NEW
1665  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1666     directories, and somewhat improved
1667  Module sis5595: NEW
1668  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1669  Library: Support for new chip drivers, several small bugs fixed
1670  Library manual pages: NEW
1671  Program i2cdetect: Moved to detect directory
1672  Program NEW
1673  Program doc-features: NEW
1674  Program sensors: Added man-page
1675  Document BUGS: Added cdrom bug and kernel i2c conflict
16772.1.2 (19990116)
1678  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1679  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1680  Documentation in doc/kernel: NEW
16822.1.1 (19990107)
1683  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1684                     and older
1685  Module gl518sm.o: Miscelaneous bugs and problems solved
1686  Program isadump: NEW
16882.1.0 (19981230)
1689  Library: Completely NEW
1690  Program sensors: NEW
1691  Program grab_busses: NEW
1692  Program decode-dimms: More information
1693  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1694  Module w83781d.o: NEW
1695  Module lm80.o: NEW
1696  Module gl518sm.o: new procfile beep, several small updates
1697  Modules: Now use pin readings, no more scaling within the kernel (use the
1698           library instead)
17002.0.2 (19981214)
1701  Module eeprom.o: NEW
1702  Program decode-dimms: NEW
1703  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1704           2.1.58
1705  Modules: Somewhat less verbose on transfers
1706  Module lm78.o now recognizes and handles lm78-j and lm79
17082.0.1 (1998121?)
1709  Module gl518sm.o updates, to make it actually work
1710  Module lm75.o high/low-byte swapping write bug fixed
17122.0.0 (19981209)
1713  Initial release
Note: See TracBrowser for help on using the browser.