root/lm-sensors/trunk/CHANGES @ 5012

Revision 5012, 84.5 KB (checked in by khali, 6 years ago)

decode-dimms: Fix DDR2 SDRAM module speed decoding.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
4SVN-HEAD
5  Library: Fix fschrc and fschmd support
6  Program decode-dimms.pl: Fix DDR2 SDRAM module speed decoding
7  Program sensors-detect: Add Texas Instruments TMP401 detection
8                          Mention the f75375s driver
9                          Add SMSC LPC47B367-NC detection (no sensors)
10
112.10.5 (20071024)
12  File i2c-dev.h: Rename I2C_FUNC_SMBUS_HWPEC_CALC to I2C_FUNC_SMBUS_PEC
13  File sensors.conf.eg: Add a thmc50 section
14  File useful_addresses.html: Moved to the wiki
15  Library: Fix a memory leak on error
16           Speed up sensors_get_ignored() a bit
17           Fix thmc50 support for Linux 2.6
18           Fix bmcsensors support for Linux 2.6
19           Fix lm93 VID support for Linux 2.6
20           Fix adm1024 support for Linux 2.6
21           Fix maxilife support for Linux 2.6
22           Fix magnitude of temperature offsets in Linux 2.6
23           Fix adm1026 critical temperature limits for Linux 2.6
24           Fix smsc47m192 temperature faults
25           Add sch311x support
26           Add support for adm1022 temp3
27  Makefile: Fix kernel version detection (#2187)
28  Man page sensord.8: Update
29  Module fscher: Add missing read of control register (2.6 backport)
30  Module i2c-i801: Add Tolapai support (2.6 backport)
31  Module i2c-nforce2: Declare PEC as supported (2.6 backport)
32  Module i2c-piix4: Add ATI SB700 and SB800 support (2.6 backport)
33  Module lm93: Fix an array overrun (2.6 backport)
34  Program sensord: Fix f71805f fans
35                   Synchronize the version with lm-sensors
36                   Fix a memory leak when daemonizing
37                   Fix memory leaks in command line parsing
38                   Add w83793 support
39                   Log the error code on failure
40                   Add lm87 support
41  Program sensors: Fix two memory leaks on error
42                   Add sch311x support
43                   Hide error on missing dme1737 fan and pwm
44                   Add thmc50/adm1022 support
45                   Hide error on missing adm1021 die code
46                   Handle gl518sm with no voltage input values
47  Program sensors-detect: Don't probe i2c-isa as a regular i2c bus
48                          Add Winbond W83L786NR/NG/R/G detection
49                          Add Winbond W83L771W/G detection
50                          Add Intel Tolapai SMBus detection
51                          Fix SMSC SCH311x detection
52                          Add AMD K10 CPU sensor detection
53                          Fix SMSC LPC47B357/M967 detection
54                          Select the right driver for FSC chips
55  Program sensors-detect-stat.pl: Handle alternative chip lists
56
57
582.10.4 (20070716)
59  File doc/vid: Update the sysfs paths, update the chip lists
60  File i2c-dev.h: Support I2C block reads with specified length
61  File sensors.conf.eg: Add a dme1737 section
62  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
63  Library: Clean up pwm symbol names translation
64           Add dme1737 support
65           Add applesmc support
66           Add abituguru3 support
67           Add f71882fg support
68           Add w83627ehf support (for Linux 2.4)
69           Add support for the w83627ehf VID function
70           Add support for the w83627ehf thermal sensor types
71           Add support for it87 fan4 and fan5
72  Man page sensors.conf.5: Update the chip statement section
73  Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
74  Module lm85: Fix setting the fan speed min limit to 0
75               Add support for the EMC6D102 extra resolution bits
76  Module thmc50: Fix the i2c address range
77  Module w83627ehf: New (2.6 backport)
78  Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
79  Program i2cdump: Use the new I2C block read function
80  Program isadump: Detect when address bit 7 is a busy flag
81                   Fix Super-I/O exit sequence for Winbond/Fintek chips
82  Program fancontrol: Use let for arithmetic evaluation
83                      No longer need awk and grep
84                      Limit calls to external programs (Linux 2.6 only)
85                      Check for configuration file validity
86                      Support optional min and max PWM values
87                      Better integration with init scripts
88                      Use linear control instead of quadratic
89  Program pwmconfig: Use smaller steps for low PWM values
90                     Support optional min and max PWM values
91  Program mkpatch: Include w83627ehf
92  Program rrd: Support non-i2c devices (hwmon class)
93               Add missing shell declarations
94               Update URI
95  Program sensors: Drop ddcmon and eeprom support
96                   Add dme1737 support
97                   Add applesmc support
98                   Add max6680 support
99                   Add abituguru3 support
100                   Add f71882fg support
101                   Fix alignment of alarm for one-limit temperatures
102                   Add w83627ehf support (for Linux 2.4)
103                   Add support for the w83627ehf VID function
104                   Add support for the w83627ehf thermal sensor types
105                   Add support for it87 fan4 and fan5
106                   Display the extra resolution bits of the emc6d102
107  Program sensors-detect: Stop Super-I/O probe after first family success
108                          Fix SMSC DME1737 detection
109                          Add /usr/sbin to the PATH (#2199)
110                          Add ATI SB700 detection
111                          Add Maxim MAX6680/MAX6681 detection
112                          Add IT8726F detection
113                          Fix IPMI support for 2.6 kernels
114                          Add detection for non-standard SMSC Super-I/Os
115                          No longer depend on i2cdetect
116                          Add SMSC SCH5317 detection
117                          Drop detection of most non-sensors I2C chips
118                          Fix ADM1022 detection
119                          Add detection of many SMSC Super-I/O chips
120                          Add Fintek F71806FG and F71862FG detection
121
122
1232.10.3 (20070319)
124  Library: Do not skip i2c adapters with only a class device and no
125            physical device. This change is required to survive the
126            planned struct class_dev removal from future 2.6 kernels.
127           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
128           Recognize i2c-isa-based devices as such even after class_dev
129            is gone
130           Compile with -D_REENTRANT
131           Fix support of Linux 2.6's max6650 driver
132           Fix max1619 support
133  Man page i2cdetect.8: Scanning range can be restricted
134  Module bmcsensors: Fix debugging messages
135  Module i2c-ali1563: Improve the status messages (2.6 backport)
136                      Fix device initialization (2.6 backport)
137  Module i2c-amd8111: Cleanups (2.6 backport)
138                      Fix initialization race (2.6 backport)
139  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
140  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
141  Module i2c-viapro: Add CX700 support (2.6 backport)
142  Module smsc47m1: Add SMSC LPC47M292 support
143                   Get rid of a useless semaphore (2.6 backport)
144  Programs i2cdetect, i2cdump, isadump: Flush output in real time
145  Program i2cdump: Cleaner output in SMBus block read mode
146  Program fancontrol.pl: Fix pwmN_enable access (#2190)
147  Program sensors: Add smsc47m2 support (fans)
148                   Fix -A option (hide adapter name) on error
149  Program sensors-detect: Only probe relevant I2C addresses
150                          Drop ARP-capable device detection
151                          Add Maxim MAX6655/MAX6656 detection
152                           (Olexiy Avramchenko)
153                          Add Maxim MAX1668, MAX1805, MAX1989 detection
154                          Add VIA CX700 detection
155                          Drop legacy W83627HF ISA detection
156                          Don't bufferize stdout during probes
157                          Speed up the LM75 and LM77 detection
158                          Clean up the EEPROM detection
159                          Add Dallas DS75 detection
160                          Add SMSC LPC47M292 detection
161                          Add nVidia MCP61 and MCP65 detection
162                          Fix ADM1028 detection
163                          Add Nat. Semi. PC8347L Super-I/O detection
164                          Add SMSC SCH5504 Super-I/O detection (no sensors)
165                          Make the LM78 and W83781D detection safer
166
167
1682.10.2 (20070115)
169  RPM: Obsolete, removed
170  File doc/fan-divisors: Update
171  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
172  Library: Add support for the pc87247 driver (fans only)
173           Probe for busses before chips
174           Drop support for algorithm names
175           Add support for coretemp driver   
176           Major update/optimization of config-file scanner
177           Add config-file scanner regression tests
178           Add f71872f support
179           Add w83627dhg support (David Holl, #2157)
180           Get the i2c adapter names from classdev.name
181           Add adm1029 support (Corentin Labbe)
182  Man page i2cdetect.8: Describe the output convention
183  Man page sensors.1: Update (option -c) and clean up
184  Module bmcsensors: Fix several warnings
185                     Fix fragile structure initialization
186  Module i2c-i801: Add ICH9 support
187  Module p4b_smbus: Add support for the ICH5
188  Module f71805f: Fix the device address decoding (2.6 backport)
189  Module icspll: Delete. It was useless and dangerous.
190  Program decode-dimms.pl: Remove spaces at end of lines
191  Program eepromer: Fix loads of warnings
192  Program i2cdetect: Make the output clearer
193  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
194  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
195                            without need of recompilation.
196  Programs dump/*: More robust handling of user inputs
197  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
198                                  Add support for non-i2c drivers
199  Program fancontrol.pl: Disable debugging by default
200                         Add support for non-i2c drivers
201                         More tolerant config file parsing
202  Program sensord: Add pc87247 support (fans only)
203                   Add vt1211 support (#2150)
204                   Add w83627dhg support (David Holl, #2157)
205                   Add w83627ehf voltage support (Dave Platt)
206                   Add k8temp support (Dave Platt)
207  Program sensors: Add pc87247 support (fans only)
208                   Hide error on missing f71805f fan
209                   Handle option -c more efficiently
210                   Drop option -a (show algorithm names)
211                   Add f71872f support
212                   Add w83627dhg support (David Holl, #2157)
213                   Add adm1029 support (Corentin Labbe)
214                   Hide error on missing w83793 temp (Gong Jun)
215  Program sensors-detect: Add SMSC DME1737 detection
216                          Add Fintek F71882FG and EPoX EP1308 detection
217                          Add Intel Core thermal sensor detection
218                          Preallocate memory for I2C_FUNCS ioctl (#2138)
219                          Prevent misdetection of MAX6633/MAX6634/MAX6635
220                          Add Intel ICH9 detection
221                          Add Maxim MAX6648/MAX6692 detection
222                          Improve ADM1029 detection
223                          Add Andigilog chips detection
224                          Add Intel AMB FB-DIMM thermal sensor detection
225                          Add ATI SB600 detection
226
227
2282.10.1 (20060924)
229  File doc/developers/checklist renamed to dev/developers/release_checklist
230          with clarifications and updates for new SVN server.
231  File README.package: Delete.
232  File doc/busses/i2c-piix4: Update (2.6 backport)
233  File doc/developers/sysfs-interface: Update
234  File etc/sensors.conf.eg: Add an smsc47m192 section
235                            Comment out all set statements
236                            Add an it8716 section
237                            Add a w83793 section
238                            Adjust the vt1211 section to match the new driver
239                             interface
240  Library: Fix device scan when no i2c support is present
241           Add support for W83627EHF voltage inputs and alarms
242           Add support for the smsc47m192 driver
243           Fix all memory leaks (yeah!)
244           Fix no sensors being reported as an error
245           Add support for the IT8716F and IT8718F chips
246           Add support for the W83793 chip (Yuan Mu)
247           Map the 2.6 adm1026's fan8 to fan0
248           Missing sysfs busses and classes are not errors
249           Change vt1211 temp3-7 magnitude from 1 to 3
250  Makefile: Don't grep autoconf.h on user-space targets
251            Fix depmod on non-running kernel version
252            Remove empty include directories on make user_uninstall
253  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
254  Module i2c-amd756-s4882: Improve static semaphore initialization
255                           (2.6 backport)
256  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
257                   Add ICH8 support (2.6 backport)
258                   Fix block transaction poll loops (2.6 backport)
259                   Remove PCI function check (2.6 backport)
260                   Cleanups (2.6 backport)
261  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
262  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
263                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
264                    Drop the fix_hstcfg parameter (2.6 backport)
265  Module i2c-viapro: Fix compilation with kernels < 2.4.21
266                     Add VT8237A and VT8251
267  Module lm83: Add LM82 support (2.6 backport)
268  Module vt1211: The VT1211 has no in6
269                 Rework the voltage and temperature conversions and the
270                  temperature input order to match the Linux 2.6 driver
271  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
272                  Add specific alarm and beep defines for the W83791D
273  Module w83792d: Fix PWM range (2.6 backport)
274  Program decode-dimms.pl: Decode depending on the memory type
275                           Decode the manufacturing date to an ISO8601 date
276                           Add the memory size computation and provide brief
277                            timing characteritics for SDRAM/DDR/DDR2 memory
278                           Add memory size computation for Rambus memory
279                           Various output cleanups and fixes
280  Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
281  Program decode-vaio.pl: Detect and skip false positives
282  Program i2cdetect: Add a mode to print adapter functionalities
283  Program i2cdump: Restore bank after bank switching
284                   Add new mode W (read word on even register addresses)
285  Program mkpatch: Fix typo breaking f71805f
286                   Turn warnings on (-w), and fix them
287                   Print a usage message on missing command line parameters
288  Program pwmconfig: Use mktemp instead of tempfile
289  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
290                   Add smsc47m192 support
291                   Add abituguru support (Hans de Goede)
292                   Fix memory leak when printing an unknown chip
293                   Add it8716 and it8718 support
294                   Make each it87 fan and fan div optional
295                   Print missing w83791d values
296                   Add w83793 support (Yuan Mu)
297                   The adt7463 may not have in4 (#2119)
298                   Hide more vt1211 missing input errors
299                   Clearer error messages when no sensors found
300  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
301                          Add ATI IXP200/300/400 SMBus detection
302                          Prevent warning on 64-bit PCI addresses
303                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
304                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
305                           F75384S/M, F75387SG/RG and F81218D detection
306                          Add Winbond W83793R/G and W83627DHG detection
307                          Handle the W83791D driver difference between kernels
308                          Add nForce4 MCP04, MCP51 and MCP55 detection
309                          Add AMD Geode devices detection
310                          Add ITE IT8716F and IT8718F detection
311                          Add NatSemi/Winbond PC87427 detection
312                          Get driver information for busy addresses from
313                           sysfs (2.6 only)
314                          Drop the ISA IT87xxF detection
315                          Check i2c adapter functionalities before probing
316                          Add Intel ICH8 SMBus detection
317                          Add AMD K8 thermal sensors detection
318                          Simplify detection of SiS5595, VIA686 and VT8231
319                          Add Analog Devices ADM1033, ADM1034, ADT7462,
320                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
321                          Check for root user at startup
322                          Attempt to be slightly more user-friendly
323                          Add VT8237A and VT8251
324                          Remove detection of nVidia graphics adapters
325                          Use sysfs for PCI device enumeration
326                          Add generic PCI SMBus adapter detection
327                          Add generic Super-I/O logical device detection
328                          Add SMSC LPC47M172/182 detection
329
330
3312.10.0 (20060214)
332  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
333  File doc/busses/i2c-viapro: Update (2.6 backport)
334  File doc/chips/via686a: Update (2.6 backport)
335  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
336  File etc/sensors.conf.eg: Do not set vrm by default
337  File i2c-dev.h: Fix union i2c_smbus_data definition
338                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
339                  Add missing parentheses around macros
340                  Drop I2C_FUNC_SMBUS_EMUL
341                  Drop I2C_FUNC_SMBUS_*_PEC
342                  Drop I2C_SMBUS_*_PEC
343  File sensors_vid.h: Drop default VRM
344  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
345           This is intentional.  Use decode-dimms.pl if you still
346           need your memory SPD data.
347  Library: Big update to use libsysfs.  More TODO though.
348           Fix bus matching code for Linux 2.6 (Karsten Petersen)
349           Add f71805f, w83687thf support
350           Add platform drivers support
351           Fix sysctl warnings on x86_64
352           Restore vt1211 temp1
353  Makefile: Compile user-space programs with -Wundef
354  Module i2c-i801: Simplify the hardware PEC code
355                   Always set PEC mode explicitly before each transaction
356  Module i2c-i810: Documentation update, PCI IDs cleanup
357  Module i2c-keywest: Remove bus probing code (2.6 backport)
358  Module i2c-nforce2: Remove dead code (2.6 backport)
359                      Add the ID of the nForce4 MCP-04 (2.6 backport)
360  Module i2c-via: Remove dead code
361  Module i2c-viapro: Remove dead code
362                     Support I2C block read (2.6 backport)
363                     Code cleanups (2.6 backport)
364                     Improve debug register dump (2.6 backport)
365  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
366          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
367          i2c-sis645: Use pci_driver name to request I/O region; do
368                      not initialize i2c_adapter name to "unset" (2.6
369                      backport)
370  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
371                                              (2.6 backport)
372  Module adm9240: Cleanups (2.6 backport)
373  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
374  Module it87: Minor cleanups
375               Fix fan3_div setting bug (Anton V. Staaf)
376  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
377               Separate the register read function
378               Add PEC support for the ADM1032
379  Module via686a: Cleanups
380  Module w83627hf: Drop useless initialization step (2.6 backport)
381                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
382                   Fix alarms (Yuan Mu)
383                   Preserve fan min on fan div change (Yuan Mu)
384                   Properly handle W83627THF without VID (Yuan Mu)
385                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
386                   Add W83687THF support
387  Module w83781d: Drop W83697HF support (Grant Coady)
388  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
389                  Fix fan control mode (PWM/DC) reporting
390                  Fix fan div auto-adjust (Yuan Mu)
391                  Fix the subclient handling
392  Module w83l785ts: Minor cleanup (2.6 backport)
393  Module vt1211: Restore temp1
394  Modules vt1211, vt8231: Change default VRM to 9.1
395  Program decode-dimms.pl: Add lookup tables for manufacturer names
396                           Fix rounding error in PCxxxx speed computation
397                           Improve text output
398                           Improve speed under Linux 2.6
399                           Verify checksum before decoding anything
400                           Improve manufacturing location decoding
401                           Improve memory type detection
402                           Improve part number decoding
403  Program i2cdump: Drop now useless #ifdef tests
404                   Fix capability check for continuous byte mode
405  Program i2cget: New
406  Program i2cset: Add PEC support
407                  Fix argc check
408  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
409                                       Print the correct bus type if bus
410                                       functionality can be queried
411  Program isadump: Display the real addresses in flat mode
412  Program mkdev.sh: Silently skip already existing nodes
413  Program mkpatch: Include f71805f
414  Program sensord: Do not log algorithm names
415                   Drop EEPROM support (Aurelien Jarno)
416                   Add W83627EHF, F71805F/FG support
417                   Fix PC87365/PC87366 alarms
418  Program sensors: Drop free_the_label
419                   Fix compilation with uclibc (no iconv)
420                   Add f71805f, w83687thf support
421  Program sensors-detect: Drop algorithm names
422                          Do not rely on i2cdetect -l printing algo names
423                          Simplify adapter name matching mechanism
424                          New address for ADM1032, ADT7461
425                          Improve ADT7467, ADT7468 support
426                          Fix MAX6659 reported driver
427                          Add Fintek F71805F detection
428                          Add Analog Devices ADT7476 detection
429                          Add Intel 82845G detection
430                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
431                          Fix udev detection in some corner case
432                          Improve DS1621 detection
433                          Always prefer ISA access over SMBus access
434
435
4362.9.2 (20050906)
437  File doc/chips/*: Big update (2.6 backport)
438  Library: Drop ds1780-specific code (now use adm9240)
439           Fix memory leak in sensors_get_label()
440           Support /sys/class/hwmon (Linux 2.6.14+)
441           Limit stack usage in sensors_read_proc_chips()
442  Makefile: Detect 2.6+ kernels and check targets
443  Man page isaset.8: Fix typos
444  Module adm1031: Fix broken kfree() calls
445  Module i2c-ali1563: New (2.6 backport by Winbond)
446  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
447  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
448          w83627hf.c: Tag find function __init
449  Module lm93: Fix memory leak
450  Module smsc47m1: Fix PWM enable polarity on read
451  Modules w83627hf, w83781d: Allow setting fan divisor to 128
452  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
453                           Added DDR/DDR2 frequency reporting in convenient
454                           form of DDRxxx PCyyyy
455  Program i2cdump: Properly handle short i2c block reads
456  Program fancontrol.pl: Fix compile errors
457  Program mkpatch: Include i2c-ali1563
458                   Include w83792d
459  Program pwmconfig: Fix unsafe temporary file use
460  Program rrd: Support 2.6 kernels
461  Program sensord: Add support for w83637hf
462                   Support pc87360 (Henrik Brix Andersen)
463  Program sensors: Support the VAIO "VGN" prefix for eeprom
464  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
465                          Advertise the w83792d driver
466                          Improve IT8705F and IT8712F detection
467                          Merge LM82 and LM83 detection
468                          Add W83687THF detection
469
470
4712.9.1 (20050412)
472  File doc/busses/i2c-nforce2: Update
473  File doc/chips/it87: Update
474  File doc/chips/lm90: Update for adt7461
475  File doc/chips/mic74: New
476  File etc/sensors.conf.eg: New sections for lm92 and w83792d
477  Library: Add support for 2.6 fscpos driver (Stefan Ott)
478           Fix sis5595 in4 (Aurelien Jarno)
479           Add support for 2.6 gl520sm driver (Maarten Deprez)
480           Add support for 2.6 bmcsensors driver (Yani Ioannou)
481           Add support for w83792d (Chunhao Huang/Winbond)
482           Add support for 2.6 adt7461 (James Chapman)
483           Add support for 2.6 lm92
484           Add support for 2.6 vt1211
485           Add preliminary support for 2.6 w83627ehf
486  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
487            Use -fno-strict-aliasing on all architectures
488  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
489  Module bmcsensors: Fix compile error
490                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
491  Module ds1621: Fix detection (Aurelien Jarno)
492  Module eeprom: Discard SPD-centric checksum module parameter
493                 Cleanup detection function (backport from Linux 2.6)
494  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
495  Module i2c-i801: Temporarily disable broken I2C block read
496  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
497                   Gelato)
498  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
499  Module i2c-viapro: Prevent repeated resets
500  Module it87: Improve Super-I/O detection
501               Limit I2C address range
502               Support VID on the IT8712F
503  Module lm75: Only initialize CMP/INT bit
504  Module lm78: Fix bug with setting negative temperature limits
505  Module lm85: Properly differentiate between ADM1027 and ADT7463
506               Add EMC6D102 support
507  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
508               Add limited ADT7461 support
509  Module lm93: Fix IN10 (+5V) scaling
510  Module mic74: New
511  Module w83627hf: Support secondary Super-I/O address
512                   Enable temp2 and temp3 if they are disabled
513  Module w83781d: Revert AS99127F temp2 and temp3 computation change
514                  Skip final initialization step for AS99127F chips
515  Module w83792d: New (Chunhao Huang/Winbond)
516  Program ddcmon: New; user-space replacement for the ddcmon driver
517  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
518  Program isadump: Handle Super-I/O keys
519  Program lm_sensors.init: Cleanups (Axel Thimm)
520  Program mkdev.sh: Add basic command-line interface
521  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
522  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
523                     Don't complain about read-only enable files (lm85)
524                     Fix handling of alternate config file name
525  Program sensord: Fix erroneous error message (Aurelien Jarno)
526                   Support sis5595 in4 (Aurelien Jarno)
527                   Support w83627thf
528                   Support the separate it8712 prefix (Aurelien Jarno)
529  Program sensors: Display sis5595 in4 (Aurelien Jarno)
530                   No errors on missing pc87360 fans
531                   Add gl520sm support (Maarten Deprez)
532                   Improve vt1211 error/ignore handling (Michael Carland)
533                   Support w83792d, w83627ehf
534  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
535                          Improve IT8705F and IT8712F detection
536                          Improve udev detection
537                          Fix DS1621 detection
538                          Add W83627EHF detection
539                          Add ATI SMBus detection
540                          Add VT1211 alias detection
541                          Warn if chip modules not found
542                          Add i2c-ipmi to list if bmcsensors is on it
543                          Add PC87591 detection
544                          Search for correct udev db file name
545                          Add nForce3 250Gb and nForce4 detection
546
547
5482.9.0 (20041228)
549  NOTE: Requires i2c-2.9.0 or newer!
550  File README.thinkpad: Update
551  File doc/chips/it87: Cleanups
552  File doc/chips/lm63: New
553  File etc/sensors.conf.eg: Set via686a voltage limits
554  File kernel/chips/Module.mk: Resync module list with mkpatch
555  File kernel/include/sensors_compat.h: Define __devexit_p if missing
556                                        (kernels 2.4.16 and older)
557  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
558                             and dec_use removed in release 2.8.0
559  Modules (all chip drivers): Remove owner from i2c_driver; pass
560                              controlling_mod to i2c_register_entry() again
561  Module bmcsensors: Support function 1/x
562  Module i2c-amd756: Display the real bus name
563  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
564  Module i2c-i801: Support i2c block read (ICH5 and higher)
565                   Add PEC support for ICH6
566                   Add support for ICH7
567  Module i2c-ipmb: Remove from build since it doesn't work
568  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
569  Module icspll: Fix compilation
570  Module lm63: New driver for the National Semiconductor LM63
571  Module lm83: Use signed types for temperatures
572               Check limits on register writes
573  Module lm87: Round voltages properly
574               Retry on read errors (David Knierim)
575               Less agressive init (no reset)
576  Module lm90: Use signed types for temperatures
577               Check limits on register writes
578  Module lm93: Added module parameter for VID pin input thresholds.
579               Fix typo in dynamic VID alarms
580               Adds a couple log messages for failed transactions (David
581               Knierim)
582               Fix compilation breaking C99-ism (Axel Thimm)
583               Fix block read retries
584  Module pc87360: Support secondary Super-I/O address
585  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
586  Library: Add lm63 support
587           Add lpc47b397 support
588  Programs *.init: Rename lockfile to match file name
589  Programs i2cset, isaset: Written byte/word can be masked
590  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
591  Program mkpatch: Include i2c-amd756-s4882
592  Program pwmconfig: Handle new (well, back to old) pwm files names for
593                     Linux 2.6.10 and up
594  Program sensord: Do not scale load average (Aurelien Jarno)
595  Program sensors: Add lm63, lpc47b397 support
596                   Support DDR2 memory module EEPROMs (Rudolf Marek)
597                   Support only one location for the default configuration file
598                   Display the default configuration file location in --help
599                   Simplify the configuration file opening code
600  Program sensors-detect: Improve LM63 detection
601                          Discard IBM Thinkpad detection code
602                          Add PCA9556, LPC47B397, ICH7 detection
603                          Fix W83792D detection, add W83791SD detection
604
605
6062.8.8 (20041007)
607  File doc/donations: Update
608  File doc/lm_sensors-FAQ.texi: Add 4.6.1
609                                Update 4.7
610  File doc/chips/gl518sm: Update "iterate" info
611  File doc/chips/it87: Discard outdated module parameters
612  File doc/chips/lm75: LM77 is not supported
613  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
614  File doc/chips/lm93: New
615  File doc/chips/w83l785ts: Improvements
616  File etc/sensors.conf.eg: Fix it87 lines order
617                            Update lm87 section
618  File kernel/include/sensors_vid.h: Support VRM 10.0
619  Library: Support 2.6 adm1025
620           Preliminary support for 2.6 lm87
621           Support 2.6 adm9240
622           Allow an alternative sysfs file name for chip features (2.6)
623           Fix lm83 critical limits (2.6)
624           Add lm93 support
625           Prevent some procfs errors from being silently ignored
626  Makefiles: Implement user_uninstall (Rudolf Marek)
627             Spoof LOGNAME and HOSTNAME when making html man pages
628  Module adm1025: Refine detection
629                  Update limit registers again (revert of 2.8.1)
630                  Init high limits if they read 0
631                  Fix conversions
632  Module lm75: Refine detection
633  Module lm78: Fix init
634  Module lm83: Default to kind lm83 if forced.
635               Fix temperature macros.
636  Module lm90: Add LM86, MAX6657 and MAX6658 support
637  Module lm93: New
638  Module mtp008: Fix the setting of limits on temp2
639  Module pca9540: Refine detection
640  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
641                  Support VID
642                  Fix fan_div file when fan count is less than 3
643                  Additional init and debug
644  Module smsc47m1: Fix pwm_enable being inverted
645  Module w83627hf: Add alternate VCORE/in0 calculation method
646                   Remove reset of chip by driver on initialization
647  Module w83781d: Fix default VRM for w83791d
648  Module w83l785ts: Implement read error handling (backport from 2.6)
649  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
650                    Wait for user input to continue (as opposed to 5 sec
651                    delay), can be skipped with -y
652                    Various cleanups and code refactoring
653                    Update manual pages
654  Program fancontrol.init: New (Dean Takemori)
655  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
656  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
657                           (Giuseppe Della Bianca)
658  Program mkdev.sh: Detect devfs and refuse to run
659                    Use mknod's mode instead of chmod
660  Program mkpatch: Include xeontemp and pc87360
661  Program sensors: Rework adm1025 support
662                   Display pc87365/pc87366 VID
663                   Improve smsc47m1 support
664                   Hide 2.6 adm1027 alarm_mask being missing
665                   Print VRM version for all supported chips
666  Program sensors-detect: Support LM93, LM77, LM63
667                          Support PC8739x Super-I/O family (no sensors)
668                          Fix PCA9540 support
669                          Refine ADM1025/ADM1025A detection
670                          Refine LM75 detection
671                          Ignore missing /proc/modules (Andras Bali)
672                          Script-wide Perl cleanups
673                          Support udev
674                          Support W83792D, LM96000
675
676
6772.8.7 (20040611)
678  File README.thinkpad: Update 24RF08 status
679  File doc/fan-divisors: More info on accuracy
680  File doc/lm_sensors-FAQ.texi: Update 4.27
681  File doc/chips/adm1031: New
682  File doc/chips/max1619: New
683  File doc/chips/pc87360-fan: Renamed to pc87360
684  File doc/chips/pc87360: Big update
685  File doc/chips/w83781d: Update AS99127F documentation
686  File etc/sensors.conf.eg: Add comments about BP6 voltages
687                            Add comment on Asus A7V8X-X VCore
688                            Misc fixes to lm80 section
689                            Update via686a section
690                            New lm99 section
691                            Add section for LM85-like chips
692                            Preliminary pc87366 section
693                            Add comment on GL520SM application modes
694                            Document beep_enable (Aurelien Jarno)
695                            Preliminary max1619 section
696                            Preliminary adm1030 and adm1031 sections
697  Library: Fix 2.6 VRM
698           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
699           Fully support the PC87360 family
700           Support the lm99
701           Add version and date strings
702           Support 2.6 max1619
703  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
704  Man page i2cdetect.8: document new command line flags
705  Man page i2cdump.8: More details on how i2cdump can write to a chip
706  Modules (all chip drivers): Rework memory allocation scheme.
707  Module adm1031: New (Alexandre d'Alton)
708  Module bmcsensors: Fix oops by creating thread for initialization
709  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
710  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
711          asb100.c, lm92.c: Use swab16
712  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
713  Module gl520sm: Less agressive initialization process
714                  Fix temp1 limits being unsettable in application
715                  Ensure that temp2 and in4 are not used at the same time
716  Module i2c-i801: Support 6300ESB and ICH6
717  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
718  Module i2c-sis645: Add support for SiS655
719  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
720  Module lm90: Support LM99 and LM89
721  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
722               Get rid of useless i2c_probe call
723  Module max1619: New (Alexey Fisher)
724  Module p4b_smbus: Add support for mobile versions of the 82801
725                    (Axel Thimm)
726  Module pc87360-fan: Renamed to pc87360
727  Module pc87360: Also support PC87365 and PC87366
728                  Add write support
729                  Correctly set the chip name depending on the type
730                  Add voltage and temperature support
731                  Fix fan speed computation
732                  Retrieve fans configuration from Super-I/O space
733                  Export pwm_enable (read-only)
734                  Honor pwm invert bits
735                  Clear fan alarms after we read them
736                  Do not read fan data when monitoring is disabled
737                  Do not include SENSORS_INSMOD stuff
738                  New module parameter: init
739                  Fan clock dividers change automatically
740                  Add thermistor dupport
741  Module smsc47m1: Lock on reads and writes
742                   Various PWM fixes
743  Module thmc50: Fix address range
744  Module via686a: Fix voltage roundings
745                  Simplify temperature conversions
746  Module w83781d: Drop PWM support for as99127f
747                  Invert AS99127F beep bits in driver rather than user-space
748  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
749  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
750  Program fancontrol.pl: New
751  Program i2cdetect: Adapt probing method to address
752                     Add -q and -r flags to force probing methods
753                     Allow probing range selection
754  Program isadump: Major improvements
755  Program isaset: New
756  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
757                   module
758                   Include i2c-nforce2
759  Program sensord: New --rrd-no-average parameter
760                   Synchronize time slots with rrd
761                   Fix W83781D temp3 alarm (Aurelien Jarno)
762                   Add ASB100 support (Andrew May)
763  Program sensors: Fully support the PC87360 family
764                   Fix lm80 temperature alarms
765                   Support the lm99
766                   Do not invert AS99127F beep bits anymore
767                   Fix W83781D temp3 alarm (Aurelien Jarno)
768                   Print library version string
769  Program sensors-detect: Rework Super I/O detection
770                          Support SiS655/SiS96x
771                          Support ADT7461 and ADT7467
772                          Better support for ADM1027, ADT7460 and ADT7463
773                          Explicitly support ADM1028
774                          Scan all logical devices of PC87365 and PC87366
775                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
776                          Detect eeproms with software write protect (not
777                          enabled by default)
778                          Support ALi 1563 (2.6 only)
779                          Drop LTC1710 support
780                          Use byte reads for probing on ranges 0x30-0x37 and
781                          0x50-0x5F
782                          Improve LM89 and LM99 support
783                          Support GeForce FX 5900 video cards
784                          Fix devfs misdetection (Aurelien Jarno)
785                          Detect 6300ESB, ICH6
786                          Fix double detection of ISA chips
787                          Support MAX1619
788                          Support PC87373 Super-I/O
789                          Fix unknown adapters appearing multiple times
790                          Refine MAX6650/MAX6651 detection
791
792
7932.8.6 (20040405)
794  File README.thinkpad: Update status
795  File doc/chips/pca9540: New
796  File doc/chips/pc87360-fan: New
797  File etc/sensors.conf.eg: Update pcf8591 default configuration
798  Library: Switch to new sysfs naming standard
799           Fix gcc 3.3 warnings (Philipp Thomas)
800           Support 2.6 ds1621 and pcf8591
801           Change pcf8591 magnitudes
802           Support pc87360-fan
803  Makefile: Install shared library 755
804  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
805  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
806  Modules ds1621, pcf8591: Check for capabilities before using them
807                           (Aurelien Jarno)
808  Modules pcf8574, pcf8591: Cleanups
809  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
810  Module adm1021: Better detection and initialization
811  Module pca9540: New driver for the Philips PCA9540
812  Module pc87360-fan: New driver for the National Semiconductor PC87360,
813                      PC87363 and PC87364 Super I/O chips
814  Module smsc47m1: Support the LPC47B27x
815  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
816  Program i2cdetect: Skip special addresses by default
817  Program sensord: Prevent null pointer dereference (Tim Toohey)
818  Program sensors: Print the degree symbol in the terminal's current locale
819                   (Aurelien Jarno)
820                   Update pcf8591 print to support 2.6 driver
821                   Support pc87360-fan
822  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
823                          Improved SiS chips support
824                          Add a white list of IBM systems
825                          Drop support of undetectable adapters
826                          Fix smart battery detection
827                          Add smart battery charger and manager detection
828                          Rework adm1021 and clones detection
829                          The PC87360, PC87363 and PC87364 Super I/O chips
830                          now have a (preliminary) driver
831                          Rework Super I/O detection
832                          Better support of devfs
833  Program sensors-detect-stat.pl: New
834
835
8362.8.5 (20040305)
837  File doc/chips/SUMMARY: Update
838  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
839  Makefiles hotplug and rrd: Remove -o and -g arguments to install
840  Module bmcsensors: Increase max SDRs to 100
841  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
842  Module i2c-amd756: Don't register driver to avoid driver conflicts.
843                     (Daniel Rune Jensen)
844  Module it87: Better temperature sensor types handling (Takeru Komoriya)
845               Fix reset=1 (Takeru Komoriya)
846  Module lm80: Code cleanups
847  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
848  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
849  Module w83627hf: Add w83637hf support
850                   Fix exported name
851                   Fix PWM in w83627thf
852                   Preserve other bits when forcing temp2/3 to comparator mode
853  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
854                  Remove asb100 support
855  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
856          Define driver ID if i2c-id.h doesn't have it yet.
857  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
858          Backport oops fix from Linux 2.6.
859  Modules (all chips): Get rid of useless headers
860  Program decode-edid.pl: Add sysfs support
861  Program sensors: Add w83637hf support
862                   Add support for Shuttle Ethernet EEPROMs
863                   Drop 2.6 subclient detection
864  Program sensors-detect: Add heuristics to the LM80 detection function
865                          Add support for W83L785R, improve W83L784R/AR
866                          Add GeForce FX 5600 as supported by rivatv
867                          More Super IO chips, better handling
868  Library: Update to match renames in fscher
869           Reverse temporary changes to w83l785ts mappings
870           Fix vt1211 and vt8231 uch_config not being writable
871           Add 2.6 lm80 support
872           Add w83637hf support
873           Remove in6 and temp1 from vt1211 and vt8231
874           Add support for Shuttle Ethernet EEPROMs
875           Remove unused as99127f features
876
877
8782.8.4 (20040207)
879  File doc/lm_sensors-FAQ.texi: Update 4.20.
880  File doc/chips/it87: Change hyst to low
881  File doc/chips/w83l785ts: New
882  File etc/sensors.conf.eg: Change it87 hyst to low
883                            Fix w83697hf supposed to have temp3
884                            Limits initialization for adm1025/ne1619
885                            Handle fscher voltage conversions
886                            Add Tyan Trinity S2495 KT400 setup (Eric
887                              Schumann)
888                            Fix fscher fan labels (Reinhard Nissl)
889  Library: Better 2.6 eeprom support
890           Change it87 hyst to low
891           Add 2.6 gl518sm, fscher support
892           Fix 2.6 negative voltages handling
893           Temporary fix to w83l785ts mappings
894  Module adm1025: Separate prefix for NE1619
895  Module adm1026: Remove use of temporary ID
896                  Define addresses as a range
897  Module bmcsensors: Fix reservations
898  Module fscher: Externalize voltage conversions
899  Module eeprom: Remove memtype
900  Module i2c-piix4: Fix resource release error
901                    Various cleanups
902  Program decode-vaio.pl: Add sysfs support
903  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
904                   Drop linux 2.2 support
905                   Add w83627hf
906  Program sensors: Do not show algorithm by default
907                   Cleanup temperature unit display code
908                   Cleanup label spacing code
909                   Fix output to UTF-8 terms (Marcel Sebek)
910                   Simplify gl518sm print
911                   Do not ignore errors in FSC chips prints
912                   Fix w83l785ts print
913                   Cleanup FSC chips prints
914  Program sensors-detect: Fix PATH issues
915                          Correctly point to the fscher driver
916
917
9182.8.3 (20040115)
919  File lm_sensors.spec: Update
920  Library: Add 2.6 eeprom, lm90 support
921           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
922  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
923  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
924  Module i2c-amd756: Fix byte writes
925  Module i2c-tsunami: Cleanups (Daniel Nilsson)
926  Module it87: Fix sg_tlx writes; fix sensor type reporting;
927               add 8712 Super I/O detection;
928               remove initialization of temp_type and fan_ctl;
929               remove init and temp_type module parameters
930  Module lm90: Handle hysteresis differently
931  Module smartbatt: Fix detection, magnitudes, temp
932  Module w83781d: Fix negative voltages
933  Module w83l785ts: New
934  Program eeprog: Make 8 bit mode the default
935  Program fancontrol: Improvements, fixes, support 2.6 kernels
936  Program mkpatch: Add lm75.h
937  Program pwmconfig: Improvements, fixes, support 2.6 kernels
938  Program sensors: Add ASB100 support
939  Program sensors-detect: Add 8712 Super I/O detection;
940                          add W83L785TS detection
941
942
9432.8.2 (20031211)
944  IMPORTANT: Limit initialization removed from all chip drivers!
945             If you didn't run 'sensors -s' in the past you may need to now!
946  File sensors.conf.eg: Change lm75 scaling back to 1;
947                        Add example for asb100
948  Library: Fix bmcsensors scaling, increase number of sensors;
949           Add w83627thf support; Advance version to 3.0.0;
950           Add hermes, ADM1032, ASB100 support;
951           Add it87 sensor type support;
952           Add sysfs support for kernel 2.6;
953           Fix memory leaks
954  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
955             Fail if no kernel .config file exists;
956             Don't build module dependencies for user and user_install
957  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
958          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
959          smsc47m1, thmc50, via686a, w83627hf, w83781d:
960          Remove initialization of limits by driver.
961  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
962  Modules (chip): Init cleanups
963  Module asb100: New
964  Module bmcsensors: Fix voltage scaling, voltage and fan limits
965  Modules ddcmon, eeprom: Add failure printks
966  Module fscher: New (Fujitsu-Siemens Hermes driver)
967  Module i2c-amd756: Fix AMD8111 support
968  Module i2c-amd8111: Fix byte writes
969  Module i2c-nforce2: Fix byte writes
970  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
971  Module i2c-sis630: Sync with 2.6.0-X driver version
972  Module i2c-viapro: Add support for Via 8237
973  Module it87: Add pwm and "smart guardian" support;
974               add it87 sensor type support
975  Module lm75: Fix negative voltages
976  Module lm90: Add ADM1032 support
977  Module w83781d: Fix 791d and 627hf detection
978  Module w83627hf: Add VID support
979  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
980  Program eeprog: New
981  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
982                                       support sysfs for i2c bus search
983  Program i2cdetect: Add -l option to list busses
984  Program i2cdump: Add 'c' mode for consective address reads
985  Program mkpatch: Cleanups
986  Program pwmconfig: Handle multiple fans controlled by a single pwm
987  Program sensord: Remove ddcmon support
988  Program sensors: Add ADM1032 support; add messages for sysfs
989  Program sensors-detect: Prefer Super I/O drivers;
990                          Fix W83627HF and W83791D detection; detect CSB6;
991                          Detect ADM1029, ADM1030, ADM1031;
992                          Detect W83637HF, W83697UF;
993                          Add it87 sensor type support; add sysfs support
994                          Reduce lm80 misdetects; remove PCFxxxx "detection"
995                          Detect VT8237 (KT600)
996                          Use VPD instead of DMI+ACPI for Thinkpad detection
997                          Suggest new asb100 driver instead of w83781d
998
999
10002.8.1 (20031005)
1001  NOTE: Requires i2c-2.8.1 or newer!
1002  File sensors.conf.eg: Improved adm1025 section
1003                        Default temp labels for as99127f
1004                        Improved lm83 section
1005                        Better support for Asus A7V8X-X
1006  File doc/chips/SUMMARY: Add SMSC manufacturer ID
1007  File doc/chips/adm1025: Add decent documentation (almost new)
1008  File doc/chips/lm83: Known motherboards list update, misc updates
1009  Library: Change adm1025 names (hyst/over become low/high)
1010           Swap adm1025 temp1 and temp2 to match the driver's order
1011           Advance version to 2.0.1
1012           Update lm83 support
1013           Add support for lm90, xeontemp, max6650
1014           Add separate messages for read and write errors
1015           Add missing message for parse error
1016  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
1017  Modules (various): Fix includes for compilation on Alpha
1018                     Use the new i2c_delay function instead of the various
1019                     do_pause functions
1020  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
1021  Module i2c-nforce2: Cleanups
1022  Module i2c-i810: Use readl/writel for portable access to PCI memory
1023  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
1024  Module i2c-savage4: Use readl/writel for portable access to PCI memory
1025  Module i2c-sis630: Fix detection
1026                     Add block data read/write support
1027  Module i2c-sis645: Detection method change/bugfix
1028  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
1029  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
1030  Module adm1025: Major driver update
1031                  Add support for Philips NE1619
1032                  Simplify the driver a lot (unified voltages, unified
1033                  temperatures and much more)
1034                  Fix default voltage limits
1035                  Change default temperature limits
1036                  Swap remote and local temperatures to match the internal
1037                  registers order (make the code unification possible)
1038                  Export remote diode fault through alarms
1039  Module ddcmon: Major update
1040                 Add half a dozen new features
1041                 Add checksum parameter (same as for the eeprom module)
1042                 Fix monitor limits
1043  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
1044  Module lm78: Fix a fan_div/fan_min bug
1045  Module lm83: Add t_crit and alarms support
1046  Module lm90: New
1047  Module max6650: New
1048  Module saa1064: New
1049  Module smsc47m1: Add support for 47M142
1050  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1051                   enhance w83627thf support
1052  Module w83781d: Enhance chip detection; clean up error returns;
1053                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1054  Module xeontemp: New
1055  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
1056                           Mark Rambus as unsupported
1057  Program decode-edid.pl: New
1058                          Interfaces between our eeprom module and
1059                          parse-edid from the read-edid project
1060  Program p4b_smbus: Fix SMP compilation
1061  Program sensord: Add support for IT87 (Mike Black)
1062                   Change ADM1025 support to match the changes made to
1063                   the library
1064  Program sensors: Rewrite and enhance EEPROM support
1065                   Change LM83 and ADM1025 support to match the changes
1066                   made to the library
1067                   Add DRDRAM support to print_eeprom
1068                   Exit(1) on /proc write failure (Malte Starostik)
1069                   Add LM90, MAX6650 support
1070  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1071                          Add support for LM82, LM86, LM89
1072                          Improved W83781D family detection
1073                          Add support for AS19927F rev.2, ASB100 Bach
1074                          Add support for Asus Mozart-2 (3 types)
1075                          Add support for NE1619
1076                          Add support for FSC Hermes
1077                          Make sure /sbin is in the user's path
1078                          Fix EEPROM detection
1079                          Automatic module.conf and /dev/i2c* detection
1080                          Improve LM82 and LM83 detection
1081                          Handle "to-be-written" cleanly
1082                          Add detection for 47M14x Super I/O
1083                          Handle the one-address-many-chips-same-driver
1084                          case
1085
1086
10872.8.0 (20030714)
1088  NOTE: Requires i2c-2.8.0 or newer!!!
1089  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1090                  2.4.13 or later required for mkpatch.
1091  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1092                  i2c package
1093  File doc/chips/fscscy: Add watchdog documentation
1094  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
1095  File sensors.h: Now automatically generated
1096  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1097           add adm1026, lm83, lm85, w83791d support;
1098           Advance version to 2.0.0
1099  Makefiles: Generate warnings if new library won't be found by ld.so;
1100             Modules now install in kernel/drivers/i2c/[busses,chips];
1101             Ensure that headers in /usr/local/include are used first;
1102             Don't use /usr/include headers for modules;
1103             Handle multiple UTS_RELEASE definitions in linux/version.h;
1104             Automatically generate kernel/include/sensors.h;
1105             Remove old gzipped modules; remove old misc directory if empty;
1106             Remove pre-2.4 installation method;
1107             -Wall now the default;
1108             Add new targets user, user_install, and help;
1109             Run depmod after module installation
1110  Modules (all): Cleanups including
1111                - Add #include <i2c-proc.h>
1112                - C99 initializers
1113                - Remove #ifdef MODULE
1114                - Remove #ifndef THIS_MODULE
1115                - Remove #ifndef MODULE_LICENSE
1116                - Remove other 2.1/2.2 #ifdefs
1117                - Remove #include "sensors.h", copy SYSCTL defs to module
1118                - Remove excess #includes
1119                - Remove argument in i2c_register_entry()
1120                - Remove dummy xxx_command() definition
1121                - Remove EXPORT_NO_SYMBOLS
1122                - Remove init_MUTEX #define
1123                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1124                  no longer adjust their own refcounts
1125                - Use module_init() and module_exit()
1126                - Update to new i2c_driver struct definition
1127  Modules (bus PCI): Convert to PCI-module-style initialization
1128  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1129  Module adm1021: Set alarm on failed reads and report old value;
1130                  merge changes from kernel 2.5.54
1131  Module adm1026: New
1132  Module bmcsensors: Fix compile when DEBUG=1
1133  Modules ddcmon, eeprom: Use i2c block reads if possible;
1134                          better error handling
1135  Module ds1307: Add to Makefile
1136  Module gl520sm: Fix temperature over/hyst writes
1137  Module lm75: merge changes from kernel 2.5.54
1138  Module lm83: New
1139  Module lm85: New
1140  Module i2c-ali1535: Check for invalid transaction
1141  Module i2c-ali15x3: Check for invalid transaction
1142  Module i2c-amd756: merge changes from kernel 2.5.54;
1143                     check for invalid transaction
1144  Module i2c-amd8111: merge changes from kernel 2.5.54
1145  Module i2c-i801: Add support for 82801EB (ICH5)
1146  Module i2c-i810: Fix for some chips
1147  Module i2c-nforce2: New
1148  Module i2c-piix4: Check for invalid transaction
1149  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1150  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1151        north bridges; SiS962 and SiS963 south bridges
1152  Module i2c-viapro: Check for invalid transaction
1153  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1154          pwm and pwm enable support; update docs
1155  Module smbus-arp: Check adapter for HW or SW PEC support;
1156                    add reset option
1157  Module w83781d: Add support for w83791d
1158  Module w83627hf: New
1159  Program decode-dimms.pl: Recognize DDR and Rambus
1160  Program eeprom: Fix writes for small eeproms
1161  Program eeprom, eepromer: Use local i2c-dev.h for build
1162  Program fancontrol: New
1163  Program lm_sensors.init: Call sensors -s in start()
1164  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1165                   Add adm1026,lm85 support;
1166                   Remove sensors.c file; add sensors_compat.h;
1167                   Remove patches to i2c-core.c and drivers/char/mem.c;
1168                   Now works only for kernels 2.4.13 or later
1169  Program p4b_smbus: Fix 'make install';
1170                     Install in same place as other modules;
1171                     Clear correct bits in config word
1172  Program pwmconfig: New
1173  Program sensors: add adm1026, lm85, w83791d support
1174  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1175                          w83627hf, w83627thf, w83697hf);
1176                          Add support for SiS651, SiS961, SiS745, SiS746;
1177                          Support dmidecode 2.0 and later;
1178                          Fix "C" format error;
1179                          Add support for adm1026, 82801EB (ICH5), W83791D;
1180                          Add support for w83l785ts, nForce2;
1181                          Fix UTF-8 incompatibility;
1182                          Better support for lm75;
1183                          Add support for lm83
1184
11852.7.0 (20021208)
1186  NOTE: Requires i2c-2.7.0 or newer.
1187  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1188  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1189  File doc/busses/i2c-sis645: Add license
1190  File doc/chips/lm92: Add license, features
1191  File doc/chips/maxilife: Add license, parameters, features
1192  File doc/chips/smartbatt: Complete rewrite
1193  File doc/chips/vt8231: Add license, parameters
1194  File sensors.conf.eg: Add section for lm75; complete the lm78 section
1195  Library: Add support for MC1066; add multiple VRM version support for lm87;
1196           enhance adm1023 support; initial support for Sony Vaio eeprom;
1197           add support for bmcsensors; add hacks for additional dummy drivers
1198  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1199            add flags for x86_64 compiles
1200  Module adm1021: Add support for MC1066
1201  Module bmcsensors: New
1202  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1203                   kernel 2.5.43; fix 2.2 kernel compiles
1204  Module gl518sm: Iterate allowed only for rev 0x00
1205  Module i2c-amd756: Configure base address for nForce support;
1206                     check for uninitialized base address;
1207                     add support for amd8111 (SMBus 1.0)
1208  Module i2c-amd8111: New (SMBus 2.0)
1209  Module i2c-ipmb: New
1210  Module i2c-ipmi: New
1211  Module i2c-keywest: Sync with kernel 2.4.20
1212  Module i2c-sis630: Add support for SiS730
1213  Module i2c-sis645: Improve support for SiS645/961;
1214                     add support for SiS645DX/961 and SiS735;
1215                     fix 2.2 kernel compiles
1216  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1217  Module lm87: Add multiple VRM version support
1218  Module vt1211: Fix inx limits and alarms; fix in0
1219  Module vt8231: Fix inx limits and alarms; fix in0
1220  Module w83781d: Fix in0/in1 initialization
1221  Module smartbatt: New
1222  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1223  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1224                           stop decoding on checksum error
1225  Program dmidecode: Fix read bug; upgrade to version 1.8
1226  Program doc-insmod: Complete rewrite; fix author output
1227  Program doc-features: Complete rewrite; handle missing sysctl entries;
1228                        handle unknown prefix with suggestion
1229  Program lm_sensors.init: Remove spaces bug; add green/red output
1230  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1231  Program rrd: Add sanity limits to newly-created RRD.
1232  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1233  Program sensors: Add support for MC1066, Rambus Rimms;
1234                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1235                   initial support for Sony Vaio eeprom
1236  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1237                          IPMI, AMD8111; add help if no sensors found;
1238                          add ACPI method for IBM system detection;
1239                          work with old Perl versions again;
1240                          initial support for Sony Vaio eeprom
1241
12422.6.5 (20020915)
1243  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1244  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1245  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1246  Module dmi_scan: new
1247  Module ds1621: Fix enable/disable
1248  Module eeprom: Do not corrupt 24RF08's when checksum=1
1249  Module i2c-i801: Check for uninitialized base address;
1250                   enable if not enabled
1251  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1252  Module i2c-sis630: new
1253  Module i2c-sis645: new
1254  Module lm92: Fix in-kernel initialization
1255  Module via686a: Remove VT8231 support
1256  Module vt8231: new
1257  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1258  Program dmidecode: new
1259  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1260  Program mkpatch: Add Config.in entries for, lm92,
1261                   pcf8574, pcf8591, smsc47m1, vt1211;
1262                   add dmi_scan
1263  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1264  Program lm_sensors.init: fix stop()
1265  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1266                   add support for logging loadavg in RRD;
1267                   fix down-converting raw labels for RRD;
1268                   update chip support, still behind sensors
1269  Program sensors: Add /usr/local/etc to config file path;
1270                   fix -c and -u flags; add vt8231
1271  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1272                          refuse to run on IBM systems;
1273                          fix sysconfig module numbering;
1274                          change quick write to not corrupt 24RF08's
1275
12762.6.4 (20020719)
1277  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1278  File doc/vid: New
1279  File include/sensors_vid.h: New
1280  File sensors.conf.eg: Add vt1211, smsc47m1
1281  Library: Add multiple VRM version support for adm1025, w83781d;
1282           fix 'flex scanner jammed' on some systems;
1283           add vt1211, smsc47m1, lm92;
1284           fix access mode checking
1285  Makefiles: For 2.4+ kernels, modules now install in
1286             kernel/drivers/[i2c,sensors] , not misc/ , and
1287             'make install' removes old versions in misc/ .
1288             Use $CFLAGS and $CPPFLAGS if defined.
1289  Module adm1025: Add multiple VID version support
1290  Module ds1307: new
1291  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1292                     reliability improvements
1293  Module i2c-hydra: Flush posted writes
1294  Module i2c-i801: Add support for 82801DB (ICH4)
1295  Module i2c-i810: Flush posted writes
1296  Module i2c-savage4: new
1297  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1298  Module i2c-voodoo3: Flush posted writes
1299  Module ds1307: New
1300  Module lm92: New
1301  Module smbus-arp: new
1302  Module smsc47m1: new
1303  Module via686a: Add support for VT8231 sensors
1304  Module vt1211: new
1305  Module w83781d: Add multiple VID version support; fix temp alarms
1306  Program eeprom: new
1307  Program i2cdump: Add smbus block command specification, add PEC support
1308  Program lm_sensors.init: new
1309  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1310                   pcf8574, pcf8591, smsc47m1, vt1211
1311  Program p4b_smbus: Add support for ICH4
1312  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1313  Program sensord.init: Renamed, was prog/init/sensors
1314  Program sensord: Major update, now requires rrd source;
1315                   not compiled by default
1316  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1317                   (don't display algo. and adap.) option;
1318                   add vt1211, smsc47m1, lm92
1319  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1320                          add 82801DB, LM85; fix perl warnings;
1321                          generate /etc/sysconfig/lm_sensors for
1322                          lm_sensors.init script
1323
13242.6.3 (20020322)
1325  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1326  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1327  File doc/chips/it87: add more temp_type help
1328  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1329                        add adm1021 section; add lm87 AIN[1,2] template;
1330                        swap negative voltage limits for 782d,783s,627hf,
1331                        697hf,it87; add more it87 help; swap neg. voltage
1332                        limits for lm78(-j), lm79, w83781d, as99127f
1333  Library: Add PCF8591, W83697HF, ADM1023 support;
1334           fix w83* fan_min computes;
1335           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1336  Module adm1024: Add MODULE_LICENSE("GPL")
1337  Module bt869: Add s-video out and DVD resolution support
1338  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1339  Module fscscy: implement min/max for voltages and fans
1340  Module i2c-amd756: Add support for AMD768
1341  Module i2c-i810: Add support for 810E
1342  Module i2c-keywest: Big update, sync with kernel 2.4.18
1343  Module i2c-piix4: Check for uninitialized base address
1344  Module i2c-sis5595: Blacklist 645, 735
1345  Module i2c-viapro: Check for uninitialized base address
1346  Module gl518sm: Standardize /proc entries in0-3
1347  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1348               fan -> fan1; fix temp2 limit writes
1349  Module pcf8574: Add support for PCF8574A; /proc interface changed
1350  Module pcf8591: new
1351  Module sis5595: Blacklist 645, 735
1352  Module w83781d: Add W83697HF support; allow force_subclients parameter
1353                  for Tyan 2460
1354  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1355  Program decode-vaio.pl: new
1356  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1357                   add text output
1358  Program init/sensors: New SysV init script
1359  Program mkpatch.pl: Add support for fscscy, add more help entries
1360  Program p4b_smbus: new
1361  Program rrd: Install summ_week.cgi
1362  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1363                   clean up chassis intrusion prints
1364  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1365                          fix Via686a and it87 detection;
1366                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1367                          fix uninitialized values; it87 beats lm78
1368
13692.6.2 (20011118)
1370  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1371  Chip Modules (all): malloc.h -> slab.h
1372  Modules (all): Add MODULE_LICENSE("GPL")
1373  File doc/FAQ: More updates and additions
1374  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1375  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1376           update it87 alarm ID's.
1377  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1378  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1379  Module i2c-amd756: Improve busy handling/printk's
1380  Module i2c-i801: Add 82801CA/CAM support
1381  Module i2c-keywest: Sync with PPC people, it works now
1382  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1383  Module i2c-viapro: Add Via VT8233 support
1384  Module it87: Merge alarm_* /proc entries to alarms
1385  Module sis5595: Fix support for rev B0
1386  Module via686a: Make limit initializations reliable
1387  Module w83781d: Allow init=0 parameter to bypass initialization
1388  Program isadump: Add flat address space (PCI) support
1389  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1390                      fscpos, it87, maxilife, mtp008
1391  Program sensors: Fix w83781d temp precision
1392  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1393                          Fujitsu Poseidon and Scylla,
1394                          Intel 82443MX and 82801CA/CAM detection,
1395                          add ITE 8172G detection (driver in kernel 2.4.10)
1396
13972.6.1 (20010830)
1398  File BUGS: Updated
1399  File doc/FAQ: More updates and additions
1400  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1401  File sensors.conf.eg: Fix/enhance it87 section
1402  Library: ds1621 and it87 updates
1403  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1404  Module i2c-amd756: Add AMD 766 support
1405  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1406  Module i2c-piix4: Add Serverworks CSB5 support
1407  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1408  Module adm1025: Fixed temp2 min/max writes
1409  Module ds1621: Add 12-bit precision mode
1410  Module it87: Enable all alarms, add in8 support, add sensor type selection
1411  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1412                  remove support for module
1413  Module sis5595: Recognize unsupported chips and refuse to load
1414  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1415  Program eepromer: new
1416  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1417                      of sensors.c as a module in kernel
1418  Program sensors: it87 updates; adjust temp. precision for some chips
1419  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1420                          recognize unsupported SiS chips;
1421                          recognize AMD 766 and Serverworks CSB5.
1422
14232.6.0 (20010612)
1424  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1425        If your make fails because it can't find <linux/i2c-proc.h>, you
1426        forgot this step!!!
1427  File doc/FAQ: Many, many updates and additions
1428  File doc/busses/i2c-sis5595: new
1429  File doc/busses/i2c-tsunami: new
1430  File doc/chips/it87: new
1431  File doc/chips/via686a: Claim support for 686b.
1432  File README.thinkpad: new
1433  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1434                        Add lm87, adm9240, ds1780, lm81 templates;
1435                        Enhance help comments in file;
1436                        Add Tyan S2510 dual-MTP008 example;
1437                        Make separate sis5595 section.
1438  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1439  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1440  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1441           Add support for maxilife-nba and amd1024;
1442           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1443  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1444  Chip Modules (all): Change from sensors_* to i2c_* globals
1445                      for new i2c-proc.[ch]
1446  Makefiles: enhance to support Alpha architecture
1447  Module adm1021: Fix lm84 and gl523sm support
1448  Module adm1024: new
1449  Module i2c-i801: Chip detection cleanup
1450  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1451  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1452  Module i2c-tsunami: New
1453  Module i2c-via: Ensure i2c bus is tristated correctly.
1454  Module it87: new driver for IT8705, IT8712, Sis950 chips
1455  Module lm78: Recognize chipid=0x20
1456  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1457  Module mtp008: Fix temp initializations;
1458                 Save BIOS pin configuration of temps and fans;
1459                 Fix sensor type reads/writes and fan min writes;
1460                 Fix spurious invalid sensor type messages
1461  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1462                  used for patched kernel now.
1463                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1464  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1465                  Allow force_addr=0xaddr
1466  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1467  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1468                  reading changes; Add messages for subclient
1469                  registration failure
1470  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1471  Program i2cset: new
1472  Program isadump: fix for Alpha arch. compiles
1473  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1474                      Remove ltc1710; Fix i2c_sis5595 typo;
1475                      Support kernel 2.4.5 makefile change;
1476                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1477  Program sens_update_rrd: new
1478  Program sensord: Add -d (debug) and -p (pid-file) options
1479  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1480                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1481                   Change mtp008 temps from max/min to limit/hyst;
1482                   Add maxilife-nba, adm1024, it87 support.
1483  Program sensors-detect: Recognize lm78 with chipid=0x20;
1484                          Recognize SMSC Victory66 South Bridge;
1485                          Add devfs /dev/i2c/x support;
1486                          Add adm1024, it87xx support; Add thinkpad warning.
1487  Program tellerstats: new
1488
14892.5.5 (20010115)
1490  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1491        you have kernel 2.4.0-prerelease or greater.
1492  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1493  File doc/developers/proc: new
1494  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1495  Library: Add ds1621, mtp008 support
1496  Module adm1021: Add support for adm1021a / adm1023
1497  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1498  Module adm1025: Add support for remote temp; rename /proc entries to
1499                  in[0-5] and temp[1-2]; fix negative temp readings
1500  Module adm9240: Rename /proc entries to in[0-5]
1501  Module ddcmon: allow force and force_ddcmon parameters
1502  Module ds1621: new
1503  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1504  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1505  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1506  Module lm87: cleanup, update voltage calculations
1507  Module mtp008: new
1508  Module pcf8574: change update time to 5 seconds
1509  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1510  Module w83781d: fix beep setting via /proc
1511  Programs editticket, readticket: new
1512  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1513  Program mkpatch.pl: more fixes; now adds many more modules
1514  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1515                   add adm1025 temp2; report temp limits correctly as
1516                   min/max or limit/hysteresis; print message if no
1517                   sensors are found. Removed false errors from lm87 reads.
1518  Program sensors-detect: Add ds1621, mtp008 detection;
1519                          add ServerWorks detection
1520
15212.5.4 (20001012)
1522  Module i2c-viapro: Add support for Via 596B (0x3051)
1523  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1524  Program mkpatch.pl: fixed infinite loop
1525  Program sensors-detect: Detect Via 596B (0x3051)
1526
15272.5.3 (20001008)
1528  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1529  File useful_addresses.html: update
1530  Library: Add lm87 support
1531  Module pcf8574: new
1532  Module i2c-ali1535: new
1533  Module i2c-ali15x3: removed force #ifdef.
1534  Module i2c-i801: support Intel 82801BA (815E chipset)
1535  Module i2c-i801: add i2c block write support, fix smbus block bugs
1536                   (requires i2c 2.5.3 package)
1537  Module i2c-i810: support Intel 82815
1538  Module lm87: new
1539  Module sensors: Fix for kernel 2.4.0-test8
1540                  (remove copy_to_user_ret and put_user_ret)
1541  Module w83781d: limit fan divisors to 8 max. for as99127f
1542  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1543  Program i2cdump: Add smbus block read support
1544  Programs i2cdetect, i2cdump: Improve error reporting
1545  Program sensors: new switch -u (--unknown)
1546  Program sensors-detect: detect Intel 82801BA (815E chipset)
1547  Program sensors-detect: detect Intel 82815
1548  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1549  Program sensors-detect: detect National LM87
1550  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1551  Program sensors-detect: Improve error reporting
1552
15532.5.2 (20000709)
1554  File sensors.conf.eg: Fix lm80 in8 calculation
1555  Module w83781d: W83783S no longer crashes on unloading
1556  Program sensors-detect: more robustness in case of unknown i2c adapters
1557  Program sensors-detect, libsensors: fix eeprom size reporting
1558  Program sensord: more flexibility, support for alarm scanning etc.
1559  Program sensors: support for ignore setting on sensor alarms.
1560  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1561
15622.5.1 (20000618)
1563  Library: Add adm1025 support
1564  Module adm1025: new
1565  Module ddcmon: Fixed bus scan which could hang SMBus
1566  Module i2c-keywest: new
1567  Module maxilife: Add support for Maxilife '99 (NBA)
1568  Module via686a: Enable sensors if not enabled by BIOS
1569  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1570  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1571  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1572  Module w83781d: Fis as99127f fan speed (was 66% too high)
1573  Module w83781d: Improve beep input checking
1574  Program i2cdump: Add Winbond-style bank selection
1575  Program isadump: Add Winbond-style bank selection
1576  Program sensors: Add adm1025 support.
1577  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1578  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1579  File sensors.conf.eg: Add Maxilife '99 entries
1580  File sensors.conf.eg: Remove some as99127f entries.
1581    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1582          won't reinstall it) or else 'sensors -s' will fail.
1583
15842.5.0 (20000312)
1585  Dropped all kernel 2.0 and 2.1 compatibility
1586  Module i2c-i810: new
1587  Module ddcmon: new
1588  Module via686a: new
1589  Module i2c-amd756: fixed region request
1590  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1591  Module w83781d: Don't change pin settings at initialization;
1592                  also fix chip detection.
1593  Library: Support for ddcmon and via686a
1594  Program sensors-detect: Support for ddcmon and via686a
1595  Program sensors: Support for eeprom, ddcmon and via686a
1596
15972.4.5 (20000116)
1598  Introduced DESTDIR installation prefix
1599  Module lm80: fixes, temperature now read and set correctly
1600  Module i2c-voodoo3: driver enhancements
1601  Module w83781d: fixes, AS99127 works much better now
1602  Library: New ignore keyword in config file
1603  Programs: Support for new ignore keyword
1604  Program sensors-detect: Support for MGA detections
1605
16062.4.4 (19991201)
1607  Addition of the alpha release of AMD 756 SMBus host support.
1608  Many fixes and updates to the gl518sm driver
1609  Updates and fixes for device detection
1610
16112.4.0 (19990920)
1612  Too much to list.
1613  i2c and smbus parts are split off to a separate i2c package.
1614  New drivers and other stuff.
1615
16162.3.4 (19990616)
1617  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1618  All: Now compiles against kernel 2.0.x (again ;)
1619  Module gl518sm: some updates and refinements
1620
16212.3.3 (19990603)
1622  All: Now compiles against kernel 2.3.x (x >= 1)
1623  Module i2c-voodoo3: Timing issue fixes
1624  Module bt869: Seems to be functional and relatively well tested
1625  Many modules were modified to be more compatible with the new
1626   Mutex structure in the new experimental kernels.
1627
16282.3.2 (19990507)
1629  Module i2c-hydra: Now compiles on 2.0.x kernels
1630  Module i2c-lm75: Slightly better detection
1631  * New, but not compiled by default:
1632  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1633  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1634
16352.3.1 (19990501)
1636  All: Now compiles on PPC
1637  Module i2c-hydra: NEW
1638  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1639  Module w83781d: Removed deadlock (mutex was not initialized)
1640  Documentation: A few glitches removed
1641  Makefile: default module installation directory is now
1642            /lib/modules/current/extra/misc
1643  Program sensors-detect: PPC Hydra now detected
1644  Program sensors: Now prints complete GL518SM information
1645  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1646
16472.3.0 (19990422)
1648  All: Many, many changes and improvements
1649  All: Many small bugs and problems removed
1650  Modules: New insmod parameters
1651  Modules: Much improved chip detection
1652  Module maxilife: NEW
1653  Module adm1021: MAX1617A now also supported
1654  Module adm9240: DS1780 now also supported
1655  Module w83781d: W83782D and W83783S now also supported
1656  Program sensors-detect: NEW
1657  Library: All chips now supported
1658  Documentation: Very much improved
1659
16602.2.2 (199903??)
1661  Just some minor updates and bug fixes.
1662
16632.2.1 (19990218)
1664  All: Removed compile warnings
1665  Module i2c-dev: Small bug removed if DEBUG=1 was used
1666  Module sis5595: Now compiles for 2.0 kernels
1667  Module adm1021: Detection corrected
1668
16692.2.0 (19990216)
1670  All: Set copyrights to include 1999
1671  All: Small bugfixes
1672  I2C: Upgraded to newest archive of Simon Vogl
1673  Module i2c-dev: NEW
1674  Module i2c-ali15x3: NEW
1675  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1676     directories, and somewhat improved
1677  Module sis5595: NEW
1678  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1679  Library: Support for new chip drivers, several small bugs fixed
1680  Library manual pages: NEW
1681  Program i2cdetect: Moved to detect directory
1682  Program detect.pl: NEW
1683  Program doc-features: NEW
1684  Program sensors: Added man-page
1685  Document BUGS: Added cdrom bug and kernel i2c conflict
1686
16872.1.2 (19990116)
1688  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1689  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1690  Documentation in doc/kernel: NEW
1691
16922.1.1 (19990107)
1693  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1694                     and older
1695  Module gl518sm.o: Miscelaneous bugs and problems solved
1696  Program isadump: NEW
1697
16982.1.0 (19981230)
1699  Library: Completely NEW
1700  Program sensors: NEW
1701  Program grab_busses: NEW
1702  Program decode-dimms: More information
1703  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1704  Module w83781d.o: NEW
1705  Module lm80.o: NEW
1706  Module gl518sm.o: new procfile beep, several small updates
1707  Modules: Now use pin readings, no more scaling within the kernel (use the
1708           library instead)
1709
17102.0.2 (19981214)
1711  Module eeprom.o: NEW
1712  Program decode-dimms: NEW
1713  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1714           2.1.58
1715  Modules: Somewhat less verbose on transfers
1716  Module lm78.o now recognizes and handles lm78-j and lm79
1717
17182.0.1 (1998121?)
1719  Module gl518sm.o updates, to make it actually work
1720  Module lm75.o high/low-byte swapping write bug fixed
1721
17222.0.0 (19981209)
1723  Initial release
Note: See TracBrowser for help on using the browser.