Context Navigation

CHANGES @ 5285

Revision 5285, 88.7 KB (checked in by khali, 5 years ago)
Fix adm1021, adm1023 support with 2.6 kernel. This closes ticket #2334.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`

Line
1	lm_sensors CHANGES file
2	-----------------------
3
4	SVN-HEAD
5	Library: Don't choke on unrecognized devices, part 2
6	Module asb100: Remove some dead code (2.6 backport)
7	Module i2c-amd756: Fix functionality flags (2.6 backport)
8	Module i2c-amd756-s4882: Fix an error path (2.6 backport)
9	Module i2c-i801: Drop broken I2C block read support
10	Add ICH10 support
11	Module i2c-piix4: Minor cleanups (2.6 backport)
12	Module i2c-sis5595: Minor cleanups (2.6 backport)
13	Module lm75: Fix an incorrect comment (2.6 backport)
14	Module lm90: Fix LM86 detection (#2335)
15	Module w83l785ts: Don't ask user to report failures (2.6 backport)
16	Program fancontrol: Don't use named pipes when we don't need them (#2319)
17	Program sensord: Add lm90, adm1032, lm99, lm86, max6657, adt7461 support
18	Fix adm1021, adm1023 support with 2.6 kernel (#2334)
19	Program sensors-detect: New device ID for the SMSC SCH5317
20	Add SMSC SCH5127 detection
21	Add National Semiconductor LM64 detection
22	Add Asus F8000 detection
23	Add Intel ICH10 (bus) detection
24	Don't probe I2C addresses 0x40-0x47
25	Fix the parsing of I2C addresses not to scan
26	Detect and skip 1-register-only I2C devices
27	Avoid SMBus word transactions where possible
28	Add Dallas DS1631 detection
29	Fix Andigilog aSC7621 support
30	Fix Analog Devices ADT7461 support
31
32	2.10.6 "Welcome Home Lina" (20080306)
33	Library: Fix fschrc and fschmd support
34	Fix sysfs presence detection
35	Don't choke on unrecognized devices, part 1 (#2087)
36	Fix lm93 vid2 access (#2295)
37	No in1 on w83783s
38	Support DOS-style configuration files again (#2284)
39	Makefile: Revert changeset 4738, fix bug #2187 differently
40	Module adm1026: Various cleanups
41	Module eeprom: Hide Sony Vaio serial numbers to regular users (2.6 backport)
42	Drop useless debugging log messages
43	Recognize VGN as a valid Sony Vaio name prefix (2.6 backport)
44	Module gl518sm: Fix fan speed reading (2.6 backport)
45	Module gl520sm: Fix fan speed reading (2.6 backport)
46	Module lm90: Use generic i2c reads during detection (2.6 backport)
47	Module w83627hf: Enable VBAT monitoring (#2282, 2.6 backport)
48	Program decode-dimms.pl: Fix DDR2 SDRAM module speed decoding
49	Update manufacturer IDs.
50	Program decode-vaio.pl: Private data might not be readable by non-root users
51	Print the asset tag
52	Fix the timestamp decoding
53	Program i2cdump: Fix I2C block mode error code
54	Program fancontrol: Detect improperly formatted FCTEMPS value (#2293)
55	Program pwmconfig: Better diagnostics in pwmdisable
56	Give the fans some time to spin up
57	Really hide errors on sysfs writes
58	Deal gracefully with read-only pwm_enable files
59	Warn about outputs found in automatic mode
60	Fix duplicate warning message when config file is broken
61	Program sensord: Add lm85 support
62	Program sensors: Hide spurious errors on missing f71872f voltage inputs
63	Hide spurious errors on missing adm1026 inputs
64	Fix W83783S prefix matching
65	Program sensors-detect: Add Texas Instruments TMP401 detection
66	Mention the f75375s driver
67	Add SMSC LPC47B367-NC detection (no sensors)
68	Reduce w83781d/lm78 I2C address probing range
69	Drop PCA9540 detection
70	Add Intel Celeron 4xx and Penryn (CPU on 45nm)
71	detection
72	Improve sysconfig and modprobe.d integration
73	Add SMSC SCH5514D-NS detection (no sensors)
74	Lower the confidence of MAX6650/MAX6651
75	Add Fintek F71858DG detection
76	Add Fintek F81216D detection (no sensors)
77	Add SMSC SCH5027D detection
78	Do not access I/O ports on PPC
79	Move south bridge sensor detection to the right
80	section
81	Run chip_special_cases() earlier
82	Program unhide_ICH_SMBus: Add support for the 82801AA (ICH)
83
84	2.10.5 (20071024)
85	File i2c-dev.h: Rename I2C_FUNC_SMBUS_HWPEC_CALC to I2C_FUNC_SMBUS_PEC
86	File sensors.conf.eg: Add a thmc50 section
87	File useful_addresses.html: Moved to the wiki
88	Library: Fix a memory leak on error
89	Speed up sensors_get_ignored() a bit
90	Fix thmc50 support for Linux 2.6
91	Fix bmcsensors support for Linux 2.6
92	Fix lm93 VID support for Linux 2.6
93	Fix adm1024 support for Linux 2.6
94	Fix maxilife support for Linux 2.6
95	Fix magnitude of temperature offsets in Linux 2.6
96	Fix adm1026 critical temperature limits for Linux 2.6
97	Fix smsc47m192 temperature faults
98	Add sch311x support
99	Add support for adm1022 temp3
100	Makefile: Fix kernel version detection (#2187)
101	Man page sensord.8: Update
102	Module fscher: Add missing read of control register (2.6 backport)
103	Module i2c-i801: Add Tolapai support (2.6 backport)
104	Module i2c-nforce2: Declare PEC as supported (2.6 backport)
105	Module i2c-piix4: Add ATI SB700 and SB800 support (2.6 backport)
106	Module lm93: Fix an array overrun (2.6 backport)
107	Program sensord: Fix f71805f fans
108	Synchronize the version with lm-sensors
109	Fix a memory leak when daemonizing
110	Fix memory leaks in command line parsing
111	Add w83793 support
112	Log the error code on failure
113	Add lm87 support
114	Program sensors: Fix two memory leaks on error
115	Add sch311x support
116	Hide error on missing dme1737 fan and pwm
117	Add thmc50/adm1022 support
118	Hide error on missing adm1021 die code
119	Handle gl518sm with no voltage input values
120	Program sensors-detect: Don't probe i2c-isa as a regular i2c bus
121	Add Winbond W83L786NR/NG/R/G detection
122	Add Winbond W83L771W/G detection
123	Add Intel Tolapai SMBus detection
124	Fix SMSC SCH311x detection
125	Add AMD K10 CPU sensor detection
126	Fix SMSC LPC47B357/M967 detection
127	Select the right driver for FSC chips
128	Program sensors-detect-stat.pl: Handle alternative chip lists
129
130
131	2.10.4 (20070716)
132	File doc/vid: Update the sysfs paths, update the chip lists
133	File i2c-dev.h: Support I2C block reads with specified length
134	File sensors.conf.eg: Add a dme1737 section
135	File lm_sensors.sysconfig: Delete, now generated by sensors-detect
136	Library: Clean up pwm symbol names translation
137	Add dme1737 support
138	Add applesmc support
139	Add abituguru3 support
140	Add f71882fg support
141	Add w83627ehf support (for Linux 2.4)
142	Add support for the w83627ehf VID function
143	Add support for the w83627ehf thermal sensor types
144	Add support for it87 fan4 and fan5
145	Man page sensors.conf.5: Update the chip statement section
146	Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
147	Module lm85: Fix setting the fan speed min limit to 0
148	Add support for the EMC6D102 extra resolution bits
149	Module thmc50: Fix the i2c address range
150	Module w83627ehf: New (2.6 backport)
151	Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
152	Program i2cdump: Use the new I2C block read function
153	Program isadump: Detect when address bit 7 is a busy flag
154	Fix Super-I/O exit sequence for Winbond/Fintek chips
155	Program fancontrol: Use let for arithmetic evaluation
156	No longer need awk and grep
157	Limit calls to external programs (Linux 2.6 only)
158	Check for configuration file validity
159	Support optional min and max PWM values
160	Better integration with init scripts
161	Use linear control instead of quadratic
162	Program pwmconfig: Use smaller steps for low PWM values
163	Support optional min and max PWM values
164	Program mkpatch: Include w83627ehf
165	Program rrd: Support non-i2c devices (hwmon class)
166	Add missing shell declarations
167	Update URI
168	Program sensors: Drop ddcmon and eeprom support
169	Add dme1737 support
170	Add applesmc support
171	Add max6680 support
172	Add abituguru3 support
173	Add f71882fg support
174	Fix alignment of alarm for one-limit temperatures
175	Add w83627ehf support (for Linux 2.4)
176	Add support for the w83627ehf VID function
177	Add support for the w83627ehf thermal sensor types
178	Add support for it87 fan4 and fan5
179	Display the extra resolution bits of the emc6d102
180	Program sensors-detect: Stop Super-I/O probe after first family success
181	Fix SMSC DME1737 detection
182	Add /usr/sbin to the PATH (#2199)
183	Add ATI SB700 detection
184	Add Maxim MAX6680/MAX6681 detection
185	Add IT8726F detection
186	Fix IPMI support for 2.6 kernels
187	Add detection for non-standard SMSC Super-I/Os
188	No longer depend on i2cdetect
189	Add SMSC SCH5317 detection
190	Drop detection of most non-sensors I2C chips
191	Fix ADM1022 detection
192	Add detection of many SMSC Super-I/O chips
193	Add Fintek F71806FG and F71862FG detection
194
195
196	2.10.3 (20070319)
197	Library: Do not skip i2c adapters with only a class device and no
198	physical device. This change is required to survive the
199	planned struct class_dev removal from future 2.6 kernels.
200	Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
201	Recognize i2c-isa-based devices as such even after class_dev
202	is gone
203	Compile with -D_REENTRANT
204	Fix support of Linux 2.6's max6650 driver
205	Fix max1619 support
206	Man page i2cdetect.8: Scanning range can be restricted
207	Module bmcsensors: Fix debugging messages
208	Module i2c-ali1563: Improve the status messages (2.6 backport)
209	Fix device initialization (2.6 backport)
210	Module i2c-amd8111: Cleanups (2.6 backport)
211	Fix initialization race (2.6 backport)
212	Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
213	Module i2c-piix4: Add ATI SB600 support (2.6 backport)
214	Module i2c-viapro: Add CX700 support (2.6 backport)
215	Module smsc47m1: Add SMSC LPC47M292 support
216	Get rid of a useless semaphore (2.6 backport)
217	Programs i2cdetect, i2cdump, isadump: Flush output in real time
218	Program i2cdump: Cleaner output in SMBus block read mode
219	Program fancontrol.pl: Fix pwmN_enable access (#2190)
220	Program sensors: Add smsc47m2 support (fans)
221	Fix -A option (hide adapter name) on error
222	Program sensors-detect: Only probe relevant I2C addresses
223	Drop ARP-capable device detection
224	Add Maxim MAX6655/MAX6656 detection
225	(Olexiy Avramchenko)
226	Add Maxim MAX1668, MAX1805, MAX1989 detection
227	Add VIA CX700 detection
228	Drop legacy W83627HF ISA detection
229	Don't bufferize stdout during probes
230	Speed up the LM75 and LM77 detection
231	Clean up the EEPROM detection
232	Add Dallas DS75 detection
233	Add SMSC LPC47M292 detection
234	Add nVidia MCP61 and MCP65 detection
235	Fix ADM1028 detection
236	Add Nat. Semi. PC8347L Super-I/O detection
237	Add SMSC SCH5504 Super-I/O detection (no sensors)
238	Make the LM78 and W83781D detection safer
239
240
241	2.10.2 (20070115)
242	RPM: Obsolete, removed
243	File doc/fan-divisors: Update
244	File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
245	Library: Add support for the pc87247 driver (fans only)
246	Probe for busses before chips
247	Drop support for algorithm names
248	Add support for coretemp driver
249	Major update/optimization of config-file scanner
250	Add config-file scanner regression tests
251	Add f71872f support
252	Add w83627dhg support (David Holl, #2157)
253	Get the i2c adapter names from classdev.name
254	Add adm1029 support (Corentin Labbe)
255	Man page i2cdetect.8: Describe the output convention
256	Man page sensors.1: Update (option -c) and clean up
257	Module bmcsensors: Fix several warnings
258	Fix fragile structure initialization
259	Module i2c-i801: Add ICH9 support
260	Module p4b_smbus: Add support for the ICH5
261	Module f71805f: Fix the device address decoding (2.6 backport)
262	Module icspll: Delete. It was useless and dangerous.
263	Program decode-dimms.pl: Remove spaces at end of lines
264	Program eepromer: Fix loads of warnings
265	Program i2cdetect: Make the output clearer
266	Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
267	Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
268	without need of recompilation.
269	Programs dump/*: More robust handling of user inputs
270	Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
271	Add support for non-i2c drivers
272	Program fancontrol.pl: Disable debugging by default
273	Add support for non-i2c drivers
274	More tolerant config file parsing
275	Program sensord: Add pc87247 support (fans only)
276	Add vt1211 support (#2150)
277	Add w83627dhg support (David Holl, #2157)
278	Add w83627ehf voltage support (Dave Platt)
279	Add k8temp support (Dave Platt)
280	Program sensors: Add pc87247 support (fans only)
281	Hide error on missing f71805f fan
282	Handle option -c more efficiently
283	Drop option -a (show algorithm names)
284	Add f71872f support
285	Add w83627dhg support (David Holl, #2157)
286	Add adm1029 support (Corentin Labbe)
287	Hide error on missing w83793 temp (Gong Jun)
288	Program sensors-detect: Add SMSC DME1737 detection
289	Add Fintek F71882FG and EPoX EP1308 detection
290	Add Intel Core thermal sensor detection
291	Preallocate memory for I2C_FUNCS ioctl (#2138)
292	Prevent misdetection of MAX6633/MAX6634/MAX6635
293	Add Intel ICH9 detection
294	Add Maxim MAX6648/MAX6692 detection
295	Improve ADM1029 detection
296	Add Andigilog chips detection
297	Add Intel AMB FB-DIMM thermal sensor detection
298	Add ATI SB600 detection
299
300
301	2.10.1 (20060924)
302	File doc/developers/checklist renamed to dev/developers/release_checklist
303	with clarifications and updates for new SVN server.
304	File README.package: Delete.
305	File doc/busses/i2c-piix4: Update (2.6 backport)
306	File doc/developers/sysfs-interface: Update
307	File etc/sensors.conf.eg: Add an smsc47m192 section
308	Comment out all set statements
309	Add an it8716 section
310	Add a w83793 section
311	Adjust the vt1211 section to match the new driver
312	interface
313	Library: Fix device scan when no i2c support is present
314	Add support for W83627EHF voltage inputs and alarms
315	Add support for the smsc47m192 driver
316	Fix all memory leaks (yeah!)
317	Fix no sensors being reported as an error
318	Add support for the IT8716F and IT8718F chips
319	Add support for the W83793 chip (Yuan Mu)
320	Map the 2.6 adm1026's fan8 to fan0
321	Missing sysfs busses and classes are not errors
322	Change vt1211 temp3-7 magnitude from 1 to 3
323	Makefile: Don't grep autoconf.h on user-space targets
324	Fix depmod on non-running kernel version
325	Remove empty include directories on make user_uninstall
326	Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
327	Module i2c-amd756-s4882: Improve static semaphore initialization
328	(2.6 backport)
329	Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
330	Add ICH8 support (2.6 backport)
331	Fix block transaction poll loops (2.6 backport)
332	Remove PCI function check (2.6 backport)
333	Cleanups (2.6 backport)
334	Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
335	Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
336	Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
337	Drop the fix_hstcfg parameter (2.6 backport)
338	Module i2c-viapro: Fix compilation with kernels < 2.4.21
339	Add VT8237A and VT8251
340	Module lm83: Add LM82 support (2.6 backport)
341	Module vt1211: The VT1211 has no in6
342	Rework the voltage and temperature conversions and the
343	temperature input order to match the Linux 2.6 driver
344	Module w83781d: Use real-time alarm registers when possible (2.6 backport)
345	Add specific alarm and beep defines for the W83791D
346	Module w83792d: Fix PWM range (2.6 backport)
347	Program decode-dimms.pl: Decode depending on the memory type
348	Decode the manufacturing date to an ISO8601 date
349	Add the memory size computation and provide brief
350	timing characteritics for SDRAM/DDR/DDR2 memory
351	Add memory size computation for Rambus memory
352	Various output cleanups and fixes
353	Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
354	Program decode-vaio.pl: Detect and skip false positives
355	Program i2cdetect: Add a mode to print adapter functionalities
356	Program i2cdump: Restore bank after bank switching
357	Add new mode W (read word on even register addresses)
358	Program mkpatch: Fix typo breaking f71805f
359	Turn warnings on (-w), and fix them
360	Print a usage message on missing command line parameters
361	Program pwmconfig: Use mktemp instead of tempfile
362	Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
363	Add smsc47m192 support
364	Add abituguru support (Hans de Goede)
365	Fix memory leak when printing an unknown chip
366	Add it8716 and it8718 support
367	Make each it87 fan and fan div optional
368	Print missing w83791d values
369	Add w83793 support (Yuan Mu)
370	The adt7463 may not have in4 (#2119)
371	Hide more vt1211 missing input errors
372	Clearer error messages when no sensors found
373	Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
374	Add ATI IXP200/300/400 SMBus detection
375	Prevent warning on 64-bit PCI addresses
376	Add Fintek F75363SG, F75111R/RG/N, F75121R,
377	F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
378	F75384S/M, F75387SG/RG and F81218D detection
379	Add Winbond W83793R/G and W83627DHG detection
380	Handle the W83791D driver difference between kernels
381	Add nForce4 MCP04, MCP51 and MCP55 detection
382	Add AMD Geode devices detection
383	Add ITE IT8716F and IT8718F detection
384	Add NatSemi/Winbond PC87427 detection
385	Get driver information for busy addresses from
386	sysfs (2.6 only)
387	Drop the ISA IT87xxF detection
388	Check i2c adapter functionalities before probing
389	Add Intel ICH8 SMBus detection
390	Add AMD K8 thermal sensors detection
391	Simplify detection of SiS5595, VIA686 and VT8231
392	Add Analog Devices ADM1033, ADM1034, ADT7462,
393	ADT7466, ADT7470, ADT7473 and ADT7475 detection
394	Check for root user at startup
395	Attempt to be slightly more user-friendly
396	Add VT8237A and VT8251
397	Remove detection of nVidia graphics adapters
398	Use sysfs for PCI device enumeration
399	Add generic PCI SMBus adapter detection
400	Add generic Super-I/O logical device detection
401	Add SMSC LPC47M172/182 detection
402
403
404	2.10.0 (20060214)
405	File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
406	File doc/busses/i2c-viapro: Update (2.6 backport)
407	File doc/chips/via686a: Update (2.6 backport)
408	File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
409	File etc/sensors.conf.eg: Do not set vrm by default
410	File i2c-dev.h: Fix union i2c_smbus_data definition
411	Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
412	Add missing parentheses around macros
413	Drop I2C_FUNC_SMBUS_EMUL
414	Drop I2C_FUNC_SMBUS_*_PEC
415	Drop I2C_SMBUS_*_PEC
416	File sensors_vid.h: Drop default VRM
417	Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
418	This is intentional. Use decode-dimms.pl if you still
419	need your memory SPD data.
420	Library: Big update to use libsysfs. More TODO though.
421	Fix bus matching code for Linux 2.6 (Karsten Petersen)
422	Add f71805f, w83687thf support
423	Add platform drivers support
424	Fix sysctl warnings on x86_64
425	Restore vt1211 temp1
426	Makefile: Compile user-space programs with -Wundef
427	Module i2c-i801: Simplify the hardware PEC code
428	Always set PEC mode explicitly before each transaction
429	Module i2c-i810: Documentation update, PCI IDs cleanup
430	Module i2c-keywest: Remove bus probing code (2.6 backport)
431	Module i2c-nforce2: Remove dead code (2.6 backport)
432	Add the ID of the nForce4 MCP-04 (2.6 backport)
433	Module i2c-via: Remove dead code
434	Module i2c-viapro: Remove dead code
435	Support I2C block read (2.6 backport)
436	Code cleanups (2.6 backport)
437	Improve debug register dump (2.6 backport)
438	Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
439	i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
440	i2c-sis645: Use pci_driver name to request I/O region; do
441	not initialize i2c_adapter name to "unset" (2.6
442	backport)
443	Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
444	(2.6 backport)
445	Module adm9240: Cleanups (2.6 backport)
446	Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
447	Module it87: Minor cleanups
448	Fix fan3_div setting bug (Anton V. Staaf)
449	Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
450	Separate the register read function
451	Add PEC support for the ADM1032
452	Module via686a: Cleanups
453	Module w83627hf: Drop useless initialization step (2.6 backport)
454	Fix in4 for W83627THF and W83637HF (Yuan Mu)
455	Fix alarms (Yuan Mu)
456	Preserve fan min on fan div change (Yuan Mu)
457	Properly handle W83627THF without VID (Yuan Mu)
458	Fix in0 limit settings in "VRM9" mode (Yuan Mu)
459	Add W83687THF support
460	Module w83781d: Drop W83697HF support (Grant Coady)
461	Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
462	Fix fan control mode (PWM/DC) reporting
463	Fix fan div auto-adjust (Yuan Mu)
464	Fix the subclient handling
465	Module w83l785ts: Minor cleanup (2.6 backport)
466	Module vt1211: Restore temp1
467	Modules vt1211, vt8231: Change default VRM to 9.1
468	Program decode-dimms.pl: Add lookup tables for manufacturer names
469	Fix rounding error in PCxxxx speed computation
470	Improve text output
471	Improve speed under Linux 2.6
472	Verify checksum before decoding anything
473	Improve manufacturing location decoding
474	Improve memory type detection
475	Improve part number decoding
476	Program i2cdump: Drop now useless #ifdef tests
477	Fix capability check for continuous byte mode
478	Program i2cget: New
479	Program i2cset: Add PEC support
480	Fix argc check
481	Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
482	Print the correct bus type if bus
483	functionality can be queried
484	Program isadump: Display the real addresses in flat mode
485	Program mkdev.sh: Silently skip already existing nodes
486	Program mkpatch: Include f71805f
487	Program sensord: Do not log algorithm names
488	Drop EEPROM support (Aurelien Jarno)
489	Add W83627EHF, F71805F/FG support
490	Fix PC87365/PC87366 alarms
491	Program sensors: Drop free_the_label
492	Fix compilation with uclibc (no iconv)
493	Add f71805f, w83687thf support
494	Program sensors-detect: Drop algorithm names
495	Do not rely on i2cdetect -l printing algo names
496	Simplify adapter name matching mechanism
497	New address for ADM1032, ADT7461
498	Improve ADT7467, ADT7468 support
499	Fix MAX6659 reported driver
500	Add Fintek F71805F detection
501	Add Analog Devices ADT7476 detection
502	Add Intel 82845G detection
503	Add IT8201R/IT8203R/IT8206R/IT8266R detection
504	Fix udev detection in some corner case
505	Improve DS1621 detection
506	Always prefer ISA access over SMBus access
507
508
509	2.9.2 (20050906)
510	File doc/chips/*: Big update (2.6 backport)
511	Library: Drop ds1780-specific code (now use adm9240)
512	Fix memory leak in sensors_get_label()
513	Support /sys/class/hwmon (Linux 2.6.14+)
514	Limit stack usage in sensors_read_proc_chips()
515	Makefile: Detect 2.6+ kernels and check targets
516	Man page isaset.8: Fix typos
517	Module adm1031: Fix broken kfree() calls
518	Module i2c-ali1563: New (2.6 backport by Winbond)
519	Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
520	Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
521	w83627hf.c: Tag find function __init
522	Module lm93: Fix memory leak
523	Module smsc47m1: Fix PWM enable polarity on read
524	Modules w83627hf, w83781d: Allow setting fan divisor to 128
525	Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
526	Added DDR/DDR2 frequency reporting in convenient
527	form of DDRxxx PCyyyy
528	Program i2cdump: Properly handle short i2c block reads
529	Program fancontrol.pl: Fix compile errors
530	Program mkpatch: Include i2c-ali1563
531	Include w83792d
532	Program pwmconfig: Fix unsafe temporary file use
533	Program rrd: Support 2.6 kernels
534	Program sensord: Add support for w83637hf
535	Support pc87360 (Henrik Brix Andersen)
536	Program sensors: Support the VAIO "VGN" prefix for eeprom
537	Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
538	Advertise the w83792d driver
539	Improve IT8705F and IT8712F detection
540	Merge LM82 and LM83 detection
541	Add W83687THF detection
542
543
544	2.9.1 (20050412)
545	File doc/busses/i2c-nforce2: Update
546	File doc/chips/it87: Update
547	File doc/chips/lm90: Update for adt7461
548	File doc/chips/mic74: New
549	File etc/sensors.conf.eg: New sections for lm92 and w83792d
550	Library: Add support for 2.6 fscpos driver (Stefan Ott)
551	Fix sis5595 in4 (Aurelien Jarno)
552	Add support for 2.6 gl520sm driver (Maarten Deprez)
553	Add support for 2.6 bmcsensors driver (Yani Ioannou)
554	Add support for w83792d (Chunhao Huang/Winbond)
555	Add support for 2.6 adt7461 (James Chapman)
556	Add support for 2.6 lm92
557	Add support for 2.6 vt1211
558	Add preliminary support for 2.6 w83627ehf
559	Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
560	Use -fno-strict-aliasing on all architectures
561	Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
562	Module bmcsensors: Fix compile error
563	Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
564	Module ds1621: Fix detection (Aurelien Jarno)
565	Module eeprom: Discard SPD-centric checksum module parameter
566	Cleanup detection function (backport from Linux 2.6)
567	Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
568	Module i2c-i801: Temporarily disable broken I2C block read
569	Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
570	Gelato)
571	Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
572	Module i2c-viapro: Prevent repeated resets
573	Module it87: Improve Super-I/O detection
574	Limit I2C address range
575	Support VID on the IT8712F
576	Module lm75: Only initialize CMP/INT bit
577	Module lm78: Fix bug with setting negative temperature limits
578	Module lm85: Properly differentiate between ADM1027 and ADT7463
579	Add EMC6D102 support
580	Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
581	Add limited ADT7461 support
582	Module lm93: Fix IN10 (+5V) scaling
583	Module mic74: New
584	Module w83627hf: Support secondary Super-I/O address
585	Enable temp2 and temp3 if they are disabled
586	Module w83781d: Revert AS99127F temp2 and temp3 computation change
587	Skip final initialization step for AS99127F chips
588	Module w83792d: New (Chunhao Huang/Winbond)
589	Program ddcmon: New; user-space replacement for the ddcmon driver
590	Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
591	Program isadump: Handle Super-I/O keys
592	Program lm_sensors.init: Cleanups (Axel Thimm)
593	Program mkdev.sh: Add basic command-line interface
594	Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
595	Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
596	Don't complain about read-only enable files (lm85)
597	Fix handling of alternate config file name
598	Program sensord: Fix erroneous error message (Aurelien Jarno)
599	Support sis5595 in4 (Aurelien Jarno)
600	Support w83627thf
601	Support the separate it8712 prefix (Aurelien Jarno)
602	Program sensors: Display sis5595 in4 (Aurelien Jarno)
603	No errors on missing pc87360 fans
604	Add gl520sm support (Maarten Deprez)
605	Improve vt1211 error/ignore handling (Michael Carland)
606	Support w83792d, w83627ehf
607	Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
608	Improve IT8705F and IT8712F detection
609	Improve udev detection
610	Fix DS1621 detection
611	Add W83627EHF detection
612	Add ATI SMBus detection
613	Add VT1211 alias detection
614	Warn if chip modules not found
615	Add i2c-ipmi to list if bmcsensors is on it
616	Add PC87591 detection
617	Search for correct udev db file name
618	Add nForce3 250Gb and nForce4 detection
619
620
621	2.9.0 (20041228)
622	NOTE: Requires i2c-2.9.0 or newer!
623	File README.thinkpad: Update
624	File doc/chips/it87: Cleanups
625	File doc/chips/lm63: New
626	File etc/sensors.conf.eg: Set via686a voltage limits
627	File kernel/chips/Module.mk: Resync module list with mkpatch
628	File kernel/include/sensors_compat.h: Define __devexit_p if missing
629	(kernels 2.4.16 and older)
630	Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
631	and dec_use removed in release 2.8.0
632	Modules (all chip drivers): Remove owner from i2c_driver; pass
633	controlling_mod to i2c_register_entry() again
634	Module bmcsensors: Support function 1/x
635	Module i2c-amd756: Display the real bus name
636	Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
637	Module i2c-i801: Support i2c block read (ICH5 and higher)
638	Add PEC support for ICH6
639	Add support for ICH7
640	Module i2c-ipmb: Remove from build since it doesn't work
641	Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
642	Module icspll: Fix compilation
643	Module lm63: New driver for the National Semiconductor LM63
644	Module lm83: Use signed types for temperatures
645	Check limits on register writes
646	Module lm87: Round voltages properly
647	Retry on read errors (David Knierim)
648	Less agressive init (no reset)
649	Module lm90: Use signed types for temperatures
650	Check limits on register writes
651	Module lm93: Added module parameter for VID pin input thresholds.
652	Fix typo in dynamic VID alarms
653	Adds a couple log messages for failed transactions (David
654	Knierim)
655	Fix compilation breaking C99-ism (Axel Thimm)
656	Fix block read retries
657	Module pc87360: Support secondary Super-I/O address
658	Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
659	Library: Add lm63 support
660	Add lpc47b397 support
661	Programs *.init: Rename lockfile to match file name
662	Programs i2cset, isaset: Written byte/word can be masked
663	Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
664	Program mkpatch: Include i2c-amd756-s4882
665	Program pwmconfig: Handle new (well, back to old) pwm files names for
666	Linux 2.6.10 and up
667	Program sensord: Do not scale load average (Aurelien Jarno)
668	Program sensors: Add lm63, lpc47b397 support
669	Support DDR2 memory module EEPROMs (Rudolf Marek)
670	Support only one location for the default configuration file
671	Display the default configuration file location in --help
672	Simplify the configuration file opening code
673	Program sensors-detect: Improve LM63 detection
674	Discard IBM Thinkpad detection code
675	Add PCA9556, LPC47B397, ICH7 detection
676	Fix W83792D detection, add W83791SD detection
677
678
679	2.8.8 (20041007)
680	File doc/donations: Update
681	File doc/lm_sensors-FAQ.texi: Add 4.6.1
682	Update 4.7
683	File doc/chips/gl518sm: Update "iterate" info
684	File doc/chips/it87: Discard outdated module parameters
685	File doc/chips/lm75: LM77 is not supported
686	File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
687	File doc/chips/lm93: New
688	File doc/chips/w83l785ts: Improvements
689	File etc/sensors.conf.eg: Fix it87 lines order
690	Update lm87 section
691	File kernel/include/sensors_vid.h: Support VRM 10.0
692	Library: Support 2.6 adm1025
693	Preliminary support for 2.6 lm87
694	Support 2.6 adm9240
695	Allow an alternative sysfs file name for chip features (2.6)
696	Fix lm83 critical limits (2.6)
697	Add lm93 support
698	Prevent some procfs errors from being silently ignored
699	Makefiles: Implement user_uninstall (Rudolf Marek)
700	Spoof LOGNAME and HOSTNAME when making html man pages
701	Module adm1025: Refine detection
702	Update limit registers again (revert of 2.8.1)
703	Init high limits if they read 0
704	Fix conversions
705	Module lm75: Refine detection
706	Module lm78: Fix init
707	Module lm83: Default to kind lm83 if forced.
708	Fix temperature macros.
709	Module lm90: Add LM86, MAX6657 and MAX6658 support
710	Module lm93: New
711	Module mtp008: Fix the setting of limits on temp2
712	Module pca9540: Refine detection
713	Module pc87360: Change voltage/thermistor magnitude from 2 to 3
714	Support VID
715	Fix fan_div file when fan count is less than 3
716	Additional init and debug
717	Module smsc47m1: Fix pwm_enable being inverted
718	Module w83627hf: Add alternate VCORE/in0 calculation method
719	Remove reset of chip by driver on initialization
720	Module w83781d: Fix default VRM for w83791d
721	Module w83l785ts: Implement read error handling (backport from 2.6)
722	Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
723	Wait for user input to continue (as opposed to 5 sec
724	delay), can be skipped with -y
725	Various cleanups and code refactoring
726	Update manual pages
727	Program fancontrol.init: New (Dean Takemori)
728	Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
729	Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
730	(Giuseppe Della Bianca)
731	Program mkdev.sh: Detect devfs and refuse to run
732	Use mknod's mode instead of chmod
733	Program mkpatch: Include xeontemp and pc87360
734	Program sensors: Rework adm1025 support
735	Display pc87365/pc87366 VID
736	Improve smsc47m1 support
737	Hide 2.6 adm1027 alarm_mask being missing
738	Print VRM version for all supported chips
739	Program sensors-detect: Support LM93, LM77, LM63
740	Support PC8739x Super-I/O family (no sensors)
741	Fix PCA9540 support
742	Refine ADM1025/ADM1025A detection
743	Refine LM75 detection
744	Ignore missing /proc/modules (Andras Bali)
745	Script-wide Perl cleanups
746	Support udev
747	Support W83792D, LM96000
748
749
750	2.8.7 (20040611)
751	File README.thinkpad: Update 24RF08 status
752	File doc/fan-divisors: More info on accuracy
753	File doc/lm_sensors-FAQ.texi: Update 4.27
754	File doc/chips/adm1031: New
755	File doc/chips/max1619: New
756	File doc/chips/pc87360-fan: Renamed to pc87360
757	File doc/chips/pc87360: Big update
758	File doc/chips/w83781d: Update AS99127F documentation
759	File etc/sensors.conf.eg: Add comments about BP6 voltages
760	Add comment on Asus A7V8X-X VCore
761	Misc fixes to lm80 section
762	Update via686a section
763	New lm99 section
764	Add section for LM85-like chips
765	Preliminary pc87366 section
766	Add comment on GL520SM application modes
767	Document beep_enable (Aurelien Jarno)
768	Preliminary max1619 section
769	Preliminary adm1030 and adm1031 sections
770	Library: Fix 2.6 VRM
771	Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
772	Fully support the PC87360 family
773	Support the lm99
774	Add version and date strings
775	Support 2.6 max1619
776	Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
777	Man page i2cdetect.8: document new command line flags
778	Man page i2cdump.8: More details on how i2cdump can write to a chip
779	Modules (all chip drivers): Rework memory allocation scheme.
780	Module adm1031: New (Alexandre d'Alton)
781	Module bmcsensors: Fix oops by creating thread for initialization
782	Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
783	Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
784	asb100.c, lm92.c: Use swab16
785	Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
786	Module gl520sm: Less agressive initialization process
787	Fix temp1 limits being unsettable in application
788	Ensure that temp2 and in4 are not used at the same time
789	Module i2c-i801: Support 6300ESB and ICH6
790	Module i2c-piix4: Don't blacklist IBM with Serverworks chip
791	Module i2c-sis645: Add support for SiS655
792	Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
793	Module lm90: Support LM99 and LM89
794	Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
795	Get rid of useless i2c_probe call
796	Module max1619: New (Alexey Fisher)
797	Module p4b_smbus: Add support for mobile versions of the 82801
798	(Axel Thimm)
799	Module pc87360-fan: Renamed to pc87360
800	Module pc87360: Also support PC87365 and PC87366
801	Add write support
802	Correctly set the chip name depending on the type
803	Add voltage and temperature support
804	Fix fan speed computation
805	Retrieve fans configuration from Super-I/O space
806	Export pwm_enable (read-only)
807	Honor pwm invert bits
808	Clear fan alarms after we read them
809	Do not read fan data when monitoring is disabled
810	Do not include SENSORS_INSMOD stuff
811	New module parameter: init
812	Fan clock dividers change automatically
813	Add thermistor dupport
814	Module smsc47m1: Lock on reads and writes
815	Various PWM fixes
816	Module thmc50: Fix address range
817	Module via686a: Fix voltage roundings
818	Simplify temperature conversions
819	Module w83781d: Drop PWM support for as99127f
820	Invert AS99127F beep bits in driver rather than user-space
821	Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
822	Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
823	Program fancontrol.pl: New
824	Program i2cdetect: Adapt probing method to address
825	Add -q and -r flags to force probing methods
826	Allow probing range selection
827	Program isadump: Major improvements
828	Program isaset: New
829	Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
830	module
831	Include i2c-nforce2
832	Program sensord: New --rrd-no-average parameter
833	Synchronize time slots with rrd
834	Fix W83781D temp3 alarm (Aurelien Jarno)
835	Add ASB100 support (Andrew May)
836	Program sensors: Fully support the PC87360 family
837	Fix lm80 temperature alarms
838	Support the lm99
839	Do not invert AS99127F beep bits anymore
840	Fix W83781D temp3 alarm (Aurelien Jarno)
841	Print library version string
842	Program sensors-detect: Rework Super I/O detection
843	Support SiS655/SiS96x
844	Support ADT7461 and ADT7467
845	Better support for ADM1027, ADT7460 and ADT7463
846	Explicitly support ADM1028
847	Scan all logical devices of PC87365 and PC87366
848	Detect LM92, LM76, MAX6633, MAX6634, MAX6635
849	Detect eeproms with software write protect (not
850	enabled by default)
851	Support ALi 1563 (2.6 only)
852	Drop LTC1710 support
853	Use byte reads for probing on ranges 0x30-0x37 and
854	0x50-0x5F
855	Improve LM89 and LM99 support
856	Support GeForce FX 5900 video cards
857	Fix devfs misdetection (Aurelien Jarno)
858	Detect 6300ESB, ICH6
859	Fix double detection of ISA chips
860	Support MAX1619
861	Support PC87373 Super-I/O
862	Fix unknown adapters appearing multiple times
863	Refine MAX6650/MAX6651 detection
864
865
866	2.8.6 (20040405)
867	File README.thinkpad: Update status
868	File doc/chips/pca9540: New
869	File doc/chips/pc87360-fan: New
870	File etc/sensors.conf.eg: Update pcf8591 default configuration
871	Library: Switch to new sysfs naming standard
872	Fix gcc 3.3 warnings (Philipp Thomas)
873	Support 2.6 ds1621 and pcf8591
874	Change pcf8591 magnitudes
875	Support pc87360-fan
876	Makefile: Install shared library 755
877	Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
878	Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
879	Modules ds1621, pcf8591: Check for capabilities before using them
880	(Aurelien Jarno)
881	Modules pcf8574, pcf8591: Cleanups
882	Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
883	Module adm1021: Better detection and initialization
884	Module pca9540: New driver for the Philips PCA9540
885	Module pc87360-fan: New driver for the National Semiconductor PC87360,
886	PC87363 and PC87364 Super I/O chips
887	Module smsc47m1: Support the LPC47B27x
888	Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
889	Program i2cdetect: Skip special addresses by default
890	Program sensord: Prevent null pointer dereference (Tim Toohey)
891	Program sensors: Print the degree symbol in the terminal's current locale
892	(Aurelien Jarno)
893	Update pcf8591 print to support 2.6 driver
894	Support pc87360-fan
895	Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
896	Improved SiS chips support
897	Add a white list of IBM systems
898	Drop support of undetectable adapters
899	Fix smart battery detection
900	Add smart battery charger and manager detection
901	Rework adm1021 and clones detection
902	The PC87360, PC87363 and PC87364 Super I/O chips
903	now have a (preliminary) driver
904	Rework Super I/O detection
905	Better support of devfs
906	Program sensors-detect-stat.pl: New
907
908
909	2.8.5 (20040305)
910	File doc/chips/SUMMARY: Update
911	File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
912	Makefiles hotplug and rrd: Remove -o and -g arguments to install
913	Module bmcsensors: Increase max SDRs to 100
914	Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
915	Module i2c-amd756: Don't register driver to avoid driver conflicts.
916	(Daniel Rune Jensen)
917	Module it87: Better temperature sensor types handling (Takeru Komoriya)
918	Fix reset=1 (Takeru Komoriya)
919	Module lm80: Code cleanups
920	Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
921	Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
922	Module w83627hf: Add w83637hf support
923	Fix exported name
924	Fix PWM in w83627thf
925	Preserve other bits when forcing temp2/3 to comparator mode
926	Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
927	Remove asb100 support
928	Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
929	Define driver ID if i2c-id.h doesn't have it yet.
930	Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
931	Backport oops fix from Linux 2.6.
932	Modules (all chips): Get rid of useless headers
933	Program decode-edid.pl: Add sysfs support
934	Program sensors: Add w83637hf support
935	Add support for Shuttle Ethernet EEPROMs
936	Drop 2.6 subclient detection
937	Program sensors-detect: Add heuristics to the LM80 detection function
938	Add support for W83L785R, improve W83L784R/AR
939	Add GeForce FX 5600 as supported by rivatv
940	More Super IO chips, better handling
941	Library: Update to match renames in fscher
942	Reverse temporary changes to w83l785ts mappings
943	Fix vt1211 and vt8231 uch_config not being writable
944	Add 2.6 lm80 support
945	Add w83637hf support
946	Remove in6 and temp1 from vt1211 and vt8231
947	Add support for Shuttle Ethernet EEPROMs
948	Remove unused as99127f features
949
950
951	2.8.4 (20040207)
952	File doc/lm_sensors-FAQ.texi: Update 4.20.
953	File doc/chips/it87: Change hyst to low
954	File doc/chips/w83l785ts: New
955	File etc/sensors.conf.eg: Change it87 hyst to low
956	Fix w83697hf supposed to have temp3
957	Limits initialization for adm1025/ne1619
958	Handle fscher voltage conversions
959	Add Tyan Trinity S2495 KT400 setup (Eric
960	Schumann)
961	Fix fscher fan labels (Reinhard Nissl)
962	Library: Better 2.6 eeprom support
963	Change it87 hyst to low
964	Add 2.6 gl518sm, fscher support
965	Fix 2.6 negative voltages handling
966	Temporary fix to w83l785ts mappings
967	Module adm1025: Separate prefix for NE1619
968	Module adm1026: Remove use of temporary ID
969	Define addresses as a range
970	Module bmcsensors: Fix reservations
971	Module fscher: Externalize voltage conversions
972	Module eeprom: Remove memtype
973	Module i2c-piix4: Fix resource release error
974	Various cleanups
975	Program decode-vaio.pl: Add sysfs support
976	Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
977	Drop linux 2.2 support
978	Add w83627hf
979	Program sensors: Do not show algorithm by default
980	Cleanup temperature unit display code
981	Cleanup label spacing code
982	Fix output to UTF-8 terms (Marcel Sebek)
983	Simplify gl518sm print
984	Do not ignore errors in FSC chips prints
985	Fix w83l785ts print
986	Cleanup FSC chips prints
987	Program sensors-detect: Fix PATH issues
988	Correctly point to the fscher driver
989
990
991	2.8.3 (20040115)
992	File lm_sensors.spec: Update
993	Library: Add 2.6 eeprom, lm90 support
994	Fix 2.6 temp_hystX for 2.6.1-rc1 and later
995	Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
996	Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
997	Module i2c-amd756: Fix byte writes
998	Module i2c-tsunami: Cleanups (Daniel Nilsson)
999	Module it87: Fix sg_tlx writes; fix sensor type reporting;
1000	add 8712 Super I/O detection;
1001	remove initialization of temp_type and fan_ctl;
1002	remove init and temp_type module parameters
1003	Module lm90: Handle hysteresis differently
1004	Module smartbatt: Fix detection, magnitudes, temp
1005	Module w83781d: Fix negative voltages
1006	Module w83l785ts: New
1007	Program eeprog: Make 8 bit mode the default
1008	Program fancontrol: Improvements, fixes, support 2.6 kernels
1009	Program mkpatch: Add lm75.h
1010	Program pwmconfig: Improvements, fixes, support 2.6 kernels
1011	Program sensors: Add ASB100 support
1012	Program sensors-detect: Add 8712 Super I/O detection;
1013	add W83L785TS detection
1014
1015
1016	2.8.2 (20031211)
1017	IMPORTANT: Limit initialization removed from all chip drivers!
1018	If you didn't run 'sensors -s' in the past you may need to now!
1019	File sensors.conf.eg: Change lm75 scaling back to 1;
1020	Add example for asb100
1021	Library: Fix bmcsensors scaling, increase number of sensors;
1022	Add w83627thf support; Advance version to 3.0.0;
1023	Add hermes, ADM1032, ASB100 support;
1024	Add it87 sensor type support;
1025	Add sysfs support for kernel 2.6;
1026	Fix memory leaks
1027	Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
1028	Fail if no kernel .config file exists;
1029	Don't build module dependencies for user and user_install
1030	Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
1031	it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
1032	smsc47m1, thmc50, via686a, w83627hf, w83781d:
1033	Remove initialization of limits by driver.
1034	Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
1035	Modules (chip): Init cleanups
1036	Module asb100: New
1037	Module bmcsensors: Fix voltage scaling, voltage and fan limits
1038	Modules ddcmon, eeprom: Add failure printks
1039	Module fscher: New (Fujitsu-Siemens Hermes driver)
1040	Module i2c-amd756: Fix AMD8111 support
1041	Module i2c-amd8111: Fix byte writes
1042	Module i2c-nforce2: Fix byte writes
1043	Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
1044	Module i2c-sis630: Sync with 2.6.0-X driver version
1045	Module i2c-viapro: Add support for Via 8237
1046	Module it87: Add pwm and "smart guardian" support;
1047	add it87 sensor type support
1048	Module lm75: Fix negative voltages
1049	Module lm90: Add ADM1032 support
1050	Module w83781d: Fix 791d and 627hf detection
1051	Module w83627hf: Add VID support
1052	Program dmidecode: Remove (sensors-detect doesn't need it anymore)
1053	Program eeprog: New
1054	Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
1055	support sysfs for i2c bus search
1056	Program i2cdetect: Add -l option to list busses
1057	Program i2cdump: Add 'c' mode for consective address reads
1058	Program mkpatch: Cleanups
1059	Program pwmconfig: Handle multiple fans controlled by a single pwm
1060	Program sensord: Remove ddcmon support
1061	Program sensors: Add ADM1032 support; add messages for sysfs
1062	Program sensors-detect: Prefer Super I/O drivers;
1063	Fix W83627HF and W83791D detection; detect CSB6;
1064	Detect ADM1029, ADM1030, ADM1031;
1065	Detect W83637HF, W83697UF;
1066	Add it87 sensor type support; add sysfs support
1067	Reduce lm80 misdetects; remove PCFxxxx "detection"
1068	Detect VT8237 (KT600)
1069	Use VPD instead of DMI+ACPI for Thinkpad detection
1070	Suggest new asb100 driver instead of w83781d
1071
1072
1073	2.8.1 (20031005)
1074	NOTE: Requires i2c-2.8.1 or newer!
1075	File sensors.conf.eg: Improved adm1025 section
1076	Default temp labels for as99127f
1077	Improved lm83 section
1078	Better support for Asus A7V8X-X
1079	File doc/chips/SUMMARY: Add SMSC manufacturer ID
1080	File doc/chips/adm1025: Add decent documentation (almost new)
1081	File doc/chips/lm83: Known motherboards list update, misc updates
1082	Library: Change adm1025 names (hyst/over become low/high)
1083	Swap adm1025 temp1 and temp2 to match the driver's order
1084	Advance version to 2.0.1
1085	Update lm83 support
1086	Add support for lm90, xeontemp, max6650
1087	Add separate messages for read and write errors
1088	Add missing message for parse error
1089	Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
1090	Modules (various): Fix includes for compilation on Alpha
1091	Use the new i2c_delay function instead of the various
1092	do_pause functions
1093	Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
1094	Module i2c-nforce2: Cleanups
1095	Module i2c-i810: Use readl/writel for portable access to PCI memory
1096	Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
1097	Module i2c-savage4: Use readl/writel for portable access to PCI memory
1098	Module i2c-sis630: Fix detection
1099	Add block data read/write support
1100	Module i2c-sis645: Detection method change/bugfix
1101	Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
1102	Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
1103	Module adm1025: Major driver update
1104	Add support for Philips NE1619
1105	Simplify the driver a lot (unified voltages, unified
1106	temperatures and much more)
1107	Fix default voltage limits
1108	Change default temperature limits
1109	Swap remote and local temperatures to match the internal
1110	registers order (make the code unification possible)
1111	Export remote diode fault through alarms
1112	Module ddcmon: Major update
1113	Add half a dozen new features
1114	Add checksum parameter (same as for the eeprom module)
1115	Fix monitor limits
1116	Module eeprom: Ignore Sony Vaio EEPROMs with a password set
1117	Module lm78: Fix a fan_div/fan_min bug
1118	Module lm83: Add t_crit and alarms support
1119	Module lm90: New
1120	Module max6650: New
1121	Module saa1064: New
1122	Module smsc47m1: Add support for 47M142
1123	Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1124	enhance w83627thf support
1125	Module w83781d: Enhance chip detection; clean up error returns;
1126	fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1127	Module xeontemp: New
1128	Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
1129	Mark Rambus as unsupported
1130	Program decode-edid.pl: New
1131	Interfaces between our eeprom module and
1132	parse-edid from the read-edid project
1133	Program p4b_smbus: Fix SMP compilation
1134	Program sensord: Add support for IT87 (Mike Black)
1135	Change ADM1025 support to match the changes made to
1136	the library
1137	Program sensors: Rewrite and enhance EEPROM support
1138	Change LM83 and ADM1025 support to match the changes
1139	made to the library
1140	Add DRDRAM support to print_eeprom
1141	Exit(1) on /proc write failure (Malte Starostik)
1142	Add LM90, MAX6650 support
1143	Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1144	Add support for LM82, LM86, LM89
1145	Improved W83781D family detection
1146	Add support for AS19927F rev.2, ASB100 Bach
1147	Add support for Asus Mozart-2 (3 types)
1148	Add support for NE1619
1149	Add support for FSC Hermes
1150	Make sure /sbin is in the user's path
1151	Fix EEPROM detection
1152	Automatic module.conf and /dev/i2c* detection
1153	Improve LM82 and LM83 detection
1154	Handle "to-be-written" cleanly
1155	Add detection for 47M14x Super I/O
1156	Handle the one-address-many-chips-same-driver
1157	case
1158
1159
1160	2.8.0 (20030714)
1161	NOTE: Requires i2c-2.8.0 or newer!!!
1162	Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1163	2.4.13 or later required for mkpatch.
1164	File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1165	i2c package
1166	File doc/chips/fscscy: Add watchdog documentation
1167	File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
1168	File sensors.h: Now automatically generated
1169	Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1170	add adm1026, lm83, lm85, w83791d support;
1171	Advance version to 2.0.0
1172	Makefiles: Generate warnings if new library won't be found by ld.so;
1173	Modules now install in kernel/drivers/i2c/[busses,chips];
1174	Ensure that headers in /usr/local/include are used first;
1175	Don't use /usr/include headers for modules;
1176	Handle multiple UTS_RELEASE definitions in linux/version.h;
1177	Automatically generate kernel/include/sensors.h;
1178	Remove old gzipped modules; remove old misc directory if empty;
1179	Remove pre-2.4 installation method;
1180	-Wall now the default;
1181	Add new targets user, user_install, and help;
1182	Run depmod after module installation
1183	Modules (all): Cleanups including
1184	- Add #include <i2c-proc.h>
1185	- C99 initializers
1186	- Remove #ifdef MODULE
1187	- Remove #ifndef THIS_MODULE
1188	- Remove #ifndef MODULE_LICENSE
1189	- Remove other 2.1/2.2 #ifdefs
1190	- Remove #include "sensors.h", copy SYSCTL defs to module
1191	- Remove excess #includes
1192	- Remove argument in i2c_register_entry()
1193	- Remove dummy xxx_command() definition
1194	- Remove EXPORT_NO_SYMBOLS
1195	- Remove init_MUTEX #define
1196	- Remove xxx_inc_use() and xxx_dec_use() functions; modules
1197	no longer adjust their own refcounts
1198	- Use module_init() and module_exit()
1199	- Update to new i2c_driver struct definition
1200	Modules (bus PCI): Convert to PCI-module-style initialization
1201	Modules (several): Add support for AMD Opteron VRM (VID) encoding
1202	Module adm1021: Set alarm on failed reads and report old value;
1203	merge changes from kernel 2.5.54
1204	Module adm1026: New
1205	Module bmcsensors: Fix compile when DEBUG=1
1206	Modules ddcmon, eeprom: Use i2c block reads if possible;
1207	better error handling
1208	Module ds1307: Add to Makefile
1209	Module gl520sm: Fix temperature over/hyst writes
1210	Module lm75: merge changes from kernel 2.5.54
1211	Module lm83: New
1212	Module lm85: New
1213	Module i2c-ali1535: Check for invalid transaction
1214	Module i2c-ali15x3: Check for invalid transaction
1215	Module i2c-amd756: merge changes from kernel 2.5.54;
1216	check for invalid transaction
1217	Module i2c-amd8111: merge changes from kernel 2.5.54
1218	Module i2c-i801: Add support for 82801EB (ICH5)
1219	Module i2c-i810: Fix for some chips
1220	Module i2c-nforce2: New
1221	Module i2c-piix4: Check for invalid transaction
1222	Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1223	Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1224	north bridges; SiS962 and SiS963 south bridges
1225	Module i2c-viapro: Check for invalid transaction
1226	Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1227	pwm and pwm enable support; update docs
1228	Module smbus-arp: Check adapter for HW or SW PEC support;
1229	add reset option
1230	Module w83781d: Add support for w83791d
1231	Module w83627hf: New
1232	Program decode-dimms.pl: Recognize DDR and Rambus
1233	Program eeprom: Fix writes for small eeproms
1234	Program eeprom, eepromer: Use local i2c-dev.h for build
1235	Program fancontrol: New
1236	Program lm_sensors.init: Call sensors -s in start()
1237	Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1238	Add adm1026,lm85 support;
1239	Remove sensors.c file; add sensors_compat.h;
1240	Remove patches to i2c-core.c and drivers/char/mem.c;
1241	Now works only for kernels 2.4.13 or later
1242	Program p4b_smbus: Fix 'make install';
1243	Install in same place as other modules;
1244	Clear correct bits in config word
1245	Program pwmconfig: New
1246	Program sensors: add adm1026, lm85, w83791d support
1247	Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1248	w83627hf, w83627thf, w83697hf);
1249	Add support for SiS651, SiS961, SiS745, SiS746;
1250	Support dmidecode 2.0 and later;
1251	Fix "C" format error;
1252	Add support for adm1026, 82801EB (ICH5), W83791D;
1253	Add support for w83l785ts, nForce2;
1254	Fix UTF-8 incompatibility;
1255	Better support for lm75;
1256	Add support for lm83
1257
1258	2.7.0 (20021208)
1259	NOTE: Requires i2c-2.7.0 or newer.
1260	File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1261	File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1262	File doc/busses/i2c-sis645: Add license
1263	File doc/chips/lm92: Add license, features
1264	File doc/chips/maxilife: Add license, parameters, features
1265	File doc/chips/smartbatt: Complete rewrite
1266	File doc/chips/vt8231: Add license, parameters
1267	File sensors.conf.eg: Add section for lm75; complete the lm78 section
1268	Library: Add support for MC1066; add multiple VRM version support for lm87;
1269	enhance adm1023 support; initial support for Sony Vaio eeprom;
1270	add support for bmcsensors; add hacks for additional dummy drivers
1271	Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1272	add flags for x86_64 compiles
1273	Module adm1021: Add support for MC1066
1274	Module bmcsensors: New
1275	Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1276	kernel 2.5.43; fix 2.2 kernel compiles
1277	Module gl518sm: Iterate allowed only for rev 0x00
1278	Module i2c-amd756: Configure base address for nForce support;
1279	check for uninitialized base address;
1280	add support for amd8111 (SMBus 1.0)
1281	Module i2c-amd8111: New (SMBus 2.0)
1282	Module i2c-ipmb: New
1283	Module i2c-ipmi: New
1284	Module i2c-keywest: Sync with kernel 2.4.20
1285	Module i2c-sis630: Add support for SiS730
1286	Module i2c-sis645: Improve support for SiS645/961;
1287	add support for SiS645DX/961 and SiS735;
1288	fix 2.2 kernel compiles
1289	Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1290	Module lm87: Add multiple VRM version support
1291	Module vt1211: Fix inx limits and alarms; fix in0
1292	Module vt8231: Fix inx limits and alarms; fix in0
1293	Module w83781d: Fix in0/in1 initialization
1294	Module smartbatt: New
1295	Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1296	Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1297	stop decoding on checksum error
1298	Program dmidecode: Fix read bug; upgrade to version 1.8
1299	Program doc-insmod: Complete rewrite; fix author output
1300	Program doc-features: Complete rewrite; handle missing sysctl entries;
1301	handle unknown prefix with suggestion
1302	Program lm_sensors.init: Remove spaces bug; add green/red output
1303	Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1304	Program rrd: Add sanity limits to newly-created RRD.
1305	Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1306	Program sensors: Add support for MC1066, Rambus Rimms;
1307	fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1308	initial support for Sony Vaio eeprom
1309	Program sensors-detect: Add support for MC1066, smart battery, 8235,
1310	IPMI, AMD8111; add help if no sensors found;
1311	add ACPI method for IBM system detection;
1312	work with old Perl versions again;
1313	initial support for Sony Vaio eeprom
1314
1315	2.6.5 (20020915)
1316	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1317	File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1318	Library: Fix fan3_div writes for w8378* and it87; add vt8231
1319	Module dmi_scan: new
1320	Module ds1621: Fix enable/disable
1321	Module eeprom: Do not corrupt 24RF08's when checksum=1
1322	Module i2c-i801: Check for uninitialized base address;
1323	enable if not enabled
1324	Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1325	Module i2c-sis630: new
1326	Module i2c-sis645: new
1327	Module lm92: Fix in-kernel initialization
1328	Module via686a: Remove VT8231 support
1329	Module vt8231: new
1330	Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1331	Program dmidecode: new
1332	Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1333	Program mkpatch: Add Config.in entries for, lm92,
1334	pcf8574, pcf8591, smsc47m1, vt1211;
1335	add dmi_scan
1336	Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1337	Program lm_sensors.init: fix stop()
1338	Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1339	add support for logging loadavg in RRD;
1340	fix down-converting raw labels for RRD;
1341	update chip support, still behind sensors
1342	Program sensors: Add /usr/local/etc to config file path;
1343	fix -c and -u flags; add vt8231
1344	Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1345	refuse to run on IBM systems;
1346	fix sysconfig module numbering;
1347	change quick write to not corrupt 24RF08's
1348
1349	2.6.4 (20020719)
1350	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1351	File doc/vid: New
1352	File include/sensors_vid.h: New
1353	File sensors.conf.eg: Add vt1211, smsc47m1
1354	Library: Add multiple VRM version support for adm1025, w83781d;
1355	fix 'flex scanner jammed' on some systems;
1356	add vt1211, smsc47m1, lm92;
1357	fix access mode checking
1358	Makefiles: For 2.4+ kernels, modules now install in
1359	kernel/drivers/[i2c,sensors] , not misc/ , and
1360	'make install' removes old versions in misc/ .
1361	Use $CFLAGS and $CPPFLAGS if defined.
1362	Module adm1025: Add multiple VID version support
1363	Module ds1307: new
1364	Module i2c-amd756: Add nVidia nForce support; fix block read length;
1365	reliability improvements
1366	Module i2c-hydra: Flush posted writes
1367	Module i2c-i801: Add support for 82801DB (ICH4)
1368	Module i2c-i810: Flush posted writes
1369	Module i2c-savage4: new
1370	Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1371	Module i2c-voodoo3: Flush posted writes
1372	Module ds1307: New
1373	Module lm92: New
1374	Module smbus-arp: new
1375	Module smsc47m1: new
1376	Module via686a: Add support for VT8231 sensors
1377	Module vt1211: new
1378	Module w83781d: Add multiple VID version support; fix temp alarms
1379	Program eeprom: new
1380	Program i2cdump: Add smbus block command specification, add PEC support
1381	Program lm_sensors.init: new
1382	Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1383	pcf8574, pcf8591, smsc47m1, vt1211
1384	Program p4b_smbus: Add support for ICH4
1385	Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1386	Program sensord.init: Renamed, was prog/init/sensors
1387	Program sensord: Major update, now requires rrd source;
1388	not compiled by default
1389	Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1390	(don't display algo. and adap.) option;
1391	add vt1211, smsc47m1, lm92
1392	Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1393	add 82801DB, LM85; fix perl warnings;
1394	generate /etc/sysconfig/lm_sensors for
1395	lm_sensors.init script
1396
1397	2.6.3 (20020322)
1398	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1399	Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1400	File doc/chips/it87: add more temp_type help
1401	File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1402	add adm1021 section; add lm87 AIN[1,2] template;
1403	swap negative voltage limits for 782d,783s,627hf,
1404	697hf,it87; add more it87 help; swap neg. voltage
1405	limits for lm78(-j), lm79, w83781d, as99127f
1406	Library: Add PCF8591, W83697HF, ADM1023 support;
1407	fix w83* fan_min computes;
1408	swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1409	Module adm1024: Add MODULE_LICENSE("GPL")
1410	Module bt869: Add s-video out and DVD resolution support
1411	Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1412	Module fscscy: implement min/max for voltages and fans
1413	Module i2c-amd756: Add support for AMD768
1414	Module i2c-i810: Add support for 810E
1415	Module i2c-keywest: Big update, sync with kernel 2.4.18
1416	Module i2c-piix4: Check for uninitialized base address
1417	Module i2c-sis5595: Blacklist 645, 735
1418	Module i2c-viapro: Check for uninitialized base address
1419	Module gl518sm: Standardize /proc entries in0-3
1420	Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1421	fan -> fan1; fix temp2 limit writes
1422	Module pcf8574: Add support for PCF8574A; /proc interface changed
1423	Module pcf8591: new
1424	Module sis5595: Blacklist 645, 735
1425	Module w83781d: Add W83697HF support; allow force_subclients parameter
1426	for Tyan 2460
1427	Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1428	Program decode-vaio.pl: new
1429	Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1430	add text output
1431	Program init/sensors: New SysV init script
1432	Program mkpatch.pl: Add support for fscscy, add more help entries
1433	Program p4b_smbus: new
1434	Program rrd: Install summ_week.cgi
1435	Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1436	clean up chassis intrusion prints
1437	Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1438	fix Via686a and it87 detection;
1439	add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1440	fix uninitialized values; it87 beats lm78
1441
1442	2.6.2 (20011118)
1443	NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1444	Chip Modules (all): malloc.h -> slab.h
1445	Modules (all): Add MODULE_LICENSE("GPL")
1446	File doc/FAQ: More updates and additions
1447	File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1448	Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1449	update it87 alarm ID's.
1450	Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1451	Module fscscy: new (Fujitsu-Siemens Scylla driver)
1452	Module i2c-amd756: Improve busy handling/printk's
1453	Module i2c-i801: Add 82801CA/CAM support
1454	Module i2c-keywest: Sync with PPC people, it works now
1455	Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1456	Module i2c-viapro: Add Via VT8233 support
1457	Module it87: Merge alarm_* /proc entries to alarms
1458	Module sis5595: Fix support for rev B0
1459	Module via686a: Make limit initializations reliable
1460	Module w83781d: Allow init=0 parameter to bypass initialization
1461	Program isadump: Add flat address space (PCI) support
1462	Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1463	fscpos, it87, maxilife, mtp008
1464	Program sensors: Fix w83781d temp precision
1465	Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1466	Fujitsu Poseidon and Scylla,
1467	Intel 82443MX and 82801CA/CAM detection,
1468	add ITE 8172G detection (driver in kernel 2.4.10)
1469
1470	2.6.1 (20010830)
1471	File BUGS: Updated
1472	File doc/FAQ: More updates and additions
1473	File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1474	File sensors.conf.eg: Fix/enhance it87 section
1475	Library: ds1621 and it87 updates
1476	Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1477	Module i2c-amd756: Add AMD 766 support
1478	Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1479	Module i2c-piix4: Add Serverworks CSB5 support
1480	Module i2c-sis5595: Recognize unsupported chips and refuse to load
1481	Module adm1025: Fixed temp2 min/max writes
1482	Module ds1621: Add 12-bit precision mode
1483	Module it87: Enable all alarms, add in8 support, add sensor type selection
1484	Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1485	remove support for module
1486	Module sis5595: Recognize unsupported chips and refuse to load
1487	Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1488	Program eepromer: new
1489	Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1490	of sensors.c as a module in kernel
1491	Program sensors: it87 updates; adjust temp. precision for some chips
1492	Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1493	recognize unsupported SiS chips;
1494	recognize AMD 766 and Serverworks CSB5.
1495
1496	2.6.0 (20010612)
1497	NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1498	If your make fails because it can't find <linux/i2c-proc.h>, you
1499	forgot this step!!!
1500	File doc/FAQ: Many, many updates and additions
1501	File doc/busses/i2c-sis5595: new
1502	File doc/busses/i2c-tsunami: new
1503	File doc/chips/it87: new
1504	File doc/chips/via686a: Claim support for 686b.
1505	File README.thinkpad: new
1506	File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1507	Add lm87, adm9240, ds1780, lm81 templates;
1508	Enhance help comments in file;
1509	Add Tyan S2510 dual-MTP008 example;
1510	Make separate sis5595 section.
1511	Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1512	Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1513	Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1514	Add support for maxilife-nba and amd1024;
1515	Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1516	Chip Modules (all ISA): Remove #include "i2c-isa.h"
1517	Chip Modules (all): Change from sensors_* to i2c_* globals
1518	for new i2c-proc.[ch]
1519	Makefiles: enhance to support Alpha architecture
1520	Module adm1021: Fix lm84 and gl523sm support
1521	Module adm1024: new
1522	Module i2c-i801: Chip detection cleanup
1523	Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1524	Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1525	Module i2c-tsunami: New
1526	Module i2c-via: Ensure i2c bus is tristated correctly.
1527	Module it87: new driver for IT8705, IT8712, Sis950 chips
1528	Module lm78: Recognize chipid=0x20
1529	Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1530	Module mtp008: Fix temp initializations;
1531	Save BIOS pin configuration of temps and fans;
1532	Fix sensor type reads/writes and fan min writes;
1533	Fix spurious invalid sensor type messages
1534	Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1535	used for patched kernel now.
1536	Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1537	Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1538	Allow force_addr=0xaddr
1539	Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1540	Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1541	reading changes; Add messages for subclient
1542	registration failure
1543	Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1544	Program i2cset: new
1545	Program isadump: fix for Alpha arch. compiles
1546	Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1547	Remove ltc1710; Fix i2c_sis5595 typo;
1548	Support kernel 2.4.5 makefile change;
1549	Add i2c-tsunami; fixed i2c-voodoo3 configuration
1550	Program sens_update_rrd: new
1551	Program sensord: Add -d (debug) and -p (pid-file) options
1552	Program sensors: Change reported version from 1.3 to the lm_sensors version;
1553	Fix swapped limit and hysteresis on 9240, 5595, 686a;
1554	Change mtp008 temps from max/min to limit/hyst;
1555	Add maxilife-nba, adm1024, it87 support.
1556	Program sensors-detect: Recognize lm78 with chipid=0x20;
1557	Recognize SMSC Victory66 South Bridge;
1558	Add devfs /dev/i2c/x support;
1559	Add adm1024, it87xx support; Add thinkpad warning.
1560	Program tellerstats: new
1561
1562	2.5.5 (20010115)
1563	NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1564	you have kernel 2.4.0-prerelease or greater.
1565	Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1566	File doc/developers/proc: new
1567	File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1568	Library: Add ds1621, mtp008 support
1569	Module adm1021: Add support for adm1021a / adm1023
1570	Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1571	Module adm1025: Add support for remote temp; rename /proc entries to
1572	in[0-5] and temp[1-2]; fix negative temp readings
1573	Module adm9240: Rename /proc entries to in[0-5]
1574	Module ddcmon: allow force and force_ddcmon parameters
1575	Module ds1621: new
1576	Module i2c-ali1535: Enhance error checking and recovery; add mutex
1577	Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1578	Module i2c-piix4: add support for ServerWorks southbridge OSB4
1579	Module lm87: cleanup, update voltage calculations
1580	Module mtp008: new
1581	Module pcf8574: change update time to 5 seconds
1582	Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1583	Module w83781d: fix beep setting via /proc
1584	Programs editticket, readticket: new
1585	Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1586	Program mkpatch.pl: more fixes; now adds many more modules
1587	Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1588	add adm1025 temp2; report temp limits correctly as
1589	min/max or limit/hysteresis; print message if no
1590	sensors are found. Removed false errors from lm87 reads.
1591	Program sensors-detect: Add ds1621, mtp008 detection;
1592	add ServerWorks detection
1593
1594	2.5.4 (20001012)
1595	Module i2c-viapro: Add support for Via 596B (0x3051)
1596	Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1597	Program mkpatch.pl: fixed infinite loop
1598	Program sensors-detect: Detect Via 596B (0x3051)
1599
1600	2.5.3 (20001008)
1601	NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1602	File useful_addresses.html: update
1603	Library: Add lm87 support
1604	Module pcf8574: new
1605	Module i2c-ali1535: new
1606	Module i2c-ali15x3: removed force #ifdef.
1607	Module i2c-i801: support Intel 82801BA (815E chipset)
1608	Module i2c-i801: add i2c block write support, fix smbus block bugs
1609	(requires i2c 2.5.3 package)
1610	Module i2c-i810: support Intel 82815
1611	Module lm87: new
1612	Module sensors: Fix for kernel 2.4.0-test8
1613	(remove copy_to_user_ret and put_user_ret)
1614	Module w83781d: limit fan divisors to 8 max. for as99127f
1615	Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1616	Program i2cdump: Add smbus block read support
1617	Programs i2cdetect, i2cdump: Improve error reporting
1618	Program sensors: new switch -u (--unknown)
1619	Program sensors-detect: detect Intel 82801BA (815E chipset)
1620	Program sensors-detect: detect Intel 82815
1621	Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1622	Program sensors-detect: detect National LM87
1623	Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1624	Program sensors-detect: Improve error reporting
1625
1626	2.5.2 (20000709)
1627	File sensors.conf.eg: Fix lm80 in8 calculation
1628	Module w83781d: W83783S no longer crashes on unloading
1629	Program sensors-detect: more robustness in case of unknown i2c adapters
1630	Program sensors-detect, libsensors: fix eeprom size reporting
1631	Program sensord: more flexibility, support for alarm scanning etc.
1632	Program sensors: support for ignore setting on sensor alarms.
1633	Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1634
1635	2.5.1 (20000618)
1636	Library: Add adm1025 support
1637	Module adm1025: new
1638	Module ddcmon: Fixed bus scan which could hang SMBus
1639	Module i2c-keywest: new
1640	Module maxilife: Add support for Maxilife '99 (NBA)
1641	Module via686a: Enable sensors if not enabled by BIOS
1642	Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1643	Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1644	Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1645	Module w83781d: Fis as99127f fan speed (was 66% too high)
1646	Module w83781d: Improve beep input checking
1647	Program i2cdump: Add Winbond-style bank selection
1648	Program isadump: Add Winbond-style bank selection
1649	Program sensors: Add adm1025 support.
1650	Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1651	Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1652	File sensors.conf.eg: Add Maxilife '99 entries
1653	File sensors.conf.eg: Remove some as99127f entries.
1654	Note: For as99127f, reinstall sensors.conf.eg manually (make install
1655	won't reinstall it) or else 'sensors -s' will fail.
1656
1657	2.5.0 (20000312)
1658	Dropped all kernel 2.0 and 2.1 compatibility
1659	Module i2c-i810: new
1660	Module ddcmon: new
1661	Module via686a: new
1662	Module i2c-amd756: fixed region request
1663	Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1664	Module w83781d: Don't change pin settings at initialization;
1665	also fix chip detection.
1666	Library: Support for ddcmon and via686a
1667	Program sensors-detect: Support for ddcmon and via686a
1668	Program sensors: Support for eeprom, ddcmon and via686a
1669
1670	2.4.5 (20000116)
1671	Introduced DESTDIR installation prefix
1672	Module lm80: fixes, temperature now read and set correctly
1673	Module i2c-voodoo3: driver enhancements
1674	Module w83781d: fixes, AS99127 works much better now
1675	Library: New ignore keyword in config file
1676	Programs: Support for new ignore keyword
1677	Program sensors-detect: Support for MGA detections
1678
1679	2.4.4 (19991201)
1680	Addition of the alpha release of AMD 756 SMBus host support.
1681	Many fixes and updates to the gl518sm driver
1682	Updates and fixes for device detection
1683
1684	2.4.0 (19990920)
1685	Too much to list.
1686	i2c and smbus parts are split off to a separate i2c package.
1687	New drivers and other stuff.
1688
1689	2.3.4 (19990616)
1690	Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1691	All: Now compiles against kernel 2.0.x (again ;)
1692	Module gl518sm: some updates and refinements
1693
1694	2.3.3 (19990603)
1695	All: Now compiles against kernel 2.3.x (x >= 1)
1696	Module i2c-voodoo3: Timing issue fixes
1697	Module bt869: Seems to be functional and relatively well tested
1698	Many modules were modified to be more compatible with the new
1699	Mutex structure in the new experimental kernels.
1700
1701	2.3.2 (19990507)
1702	Module i2c-hydra: Now compiles on 2.0.x kernels
1703	Module i2c-lm75: Slightly better detection
1704	* New, but not compiled by default:
1705	Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1706	Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1707
1708	2.3.1 (19990501)
1709	All: Now compiles on PPC
1710	Module i2c-hydra: NEW
1711	Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1712	Module w83781d: Removed deadlock (mutex was not initialized)
1713	Documentation: A few glitches removed
1714	Makefile: default module installation directory is now
1715	/lib/modules/current/extra/misc
1716	Program sensors-detect: PPC Hydra now detected
1717	Program sensors: Now prints complete GL518SM information
1718	Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1719
1720	2.3.0 (19990422)
1721	All: Many, many changes and improvements
1722	All: Many small bugs and problems removed
1723	Modules: New insmod parameters
1724	Modules: Much improved chip detection
1725	Module maxilife: NEW
1726	Module adm1021: MAX1617A now also supported
1727	Module adm9240: DS1780 now also supported
1728	Module w83781d: W83782D and W83783S now also supported
1729	Program sensors-detect: NEW
1730	Library: All chips now supported
1731	Documentation: Very much improved
1732
1733	2.2.2 (199903??)
1734	Just some minor updates and bug fixes.
1735
1736	2.2.1 (19990218)
1737	All: Removed compile warnings
1738	Module i2c-dev: Small bug removed if DEBUG=1 was used
1739	Module sis5595: Now compiles for 2.0 kernels
1740	Module adm1021: Detection corrected
1741
1742	2.2.0 (19990216)
1743	All: Set copyrights to include 1999
1744	All: Small bugfixes
1745	I2C: Upgraded to newest archive of Simon Vogl
1746	Module i2c-dev: NEW
1747	Module i2c-ali15x3: NEW
1748	Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1749	directories, and somewhat improved
1750	Module sis5595: NEW
1751	Modules: Renamed all bus modules to i2c-*, new directory lay-out
1752	Library: Support for new chip drivers, several small bugs fixed
1753	Library manual pages: NEW
1754	Program i2cdetect: Moved to detect directory
1755	Program detect.pl: NEW
1756	Program doc-features: NEW
1757	Program sensors: Added man-page
1758	Document BUGS: Added cdrom bug and kernel i2c conflict
1759
1760	2.1.2 (19990116)
1761	Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1762	Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1763	Documentation in doc/kernel: NEW
1764
1765	2.1.1 (19990107)
1766	Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1767	and older
1768	Module gl518sm.o: Miscelaneous bugs and problems solved
1769	Program isadump: NEW
1770
1771	2.1.0 (19981230)
1772	Library: Completely NEW
1773	Program sensors: NEW
1774	Program grab_busses: NEW
1775	Program decode-dimms: More information
1776	Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1777	Module w83781d.o: NEW
1778	Module lm80.o: NEW
1779	Module gl518sm.o: new procfile beep, several small updates
1780	Modules: Now use pin readings, no more scaling within the kernel (use the
1781	library instead)
1782
1783	2.0.2 (19981214)
1784	Module eeprom.o: NEW
1785	Program decode-dimms: NEW
1786	Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1787	2.1.58
1788	Modules: Somewhat less verbose on transfers
1789	Module lm78.o now recognizes and handles lm78-j and lm79
1790
1791	2.0.1 (1998121?)
1792	Module gl518sm.o updates, to make it actually work
1793	Module lm75.o high/low-byte swapping write bug fixed
1794
1795	2.0.0 (19981209)
1796	Initial release

Note: See TracBrowser for help on using the browser.

Download in other formats:

Original Format