root/lm-sensors/trunk/CHANGES @ 5306

Revision 5306, 89.2 KB (checked in by khali, 7 years ago)

Dumping the register values before and after every transaction was
useful during driver development but now it's only spamming the log.
Backport from Linux 2.6.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
1lm_sensors CHANGES file
5  Library: Avoid namespace pollution
6  Module i2c-i801: Remove verbose debugging messages (2.6 backport)
7  Module i2c-piix4: Minor cleanups (2.6 backport)
8  Program sensors-detect: Add VIA VT1212 support
9                          Add SMSC EMC2700LPC support
112.10.7 (20080701)
12  Library: Don't choke on unrecognized devices, part 2
13           Parse the configuration file in C locale (#2312)
14  Makefile: Fallback to simple depmod if can't be found
15  Module asb100: Remove some dead code (2.6 backport)
16  Module i2c-amd756: Fix functionality flags (2.6 backport)
17  Module i2c-amd756-s4882: Fix an error path (2.6 backport)
18  Module i2c-i801: Drop broken I2C block read support
19                   Add ICH10 support
20  Module i2c-piix4: Minor cleanups (2.6 backport)
21  Module i2c-sis5595: Minor cleanups (2.6 backport)
22  Module lm75: Fix an incorrect comment (2.6 backport)
23  Module lm90: Fix LM86 detection (#2335)
24  Module w83l785ts: Don't ask user to report failures (2.6 backport)
25  Program fancontrol: Don't use named pipes when we don't need them (#2319)
26  Program sensord: Add lm90, adm1032, lm99, lm86, max6657, adt7461 support
27                   Fix adm1021, adm1023 support with 2.6 kernel (#2334)
28  Program sensors-detect: New device ID for the SMSC SCH5317
29                          Add SMSC SCH5127 detection
30                          Add National Semiconductor LM64 detection
31                          Add Asus F8000 detection
32                          Add Intel ICH10 (bus) detection
33                          Don't probe I2C addresses 0x40-0x47
34                          Fix the parsing of I2C addresses not to scan
35                          Detect and skip 1-register-only I2C devices
36                          Avoid SMBus word transactions where possible
37                          Add Dallas DS1631 detection
38                          Fix Andigilog aSC7621 support
39                          Fix Analog Devices ADT7461 support
40                          Add VIA C7 support
41                          Fix Winbond W83L786NR/NG/R/G support (#2336)
432.10.6 "Welcome Home Lina" (20080306)
44  Library: Fix fschrc and fschmd support
45           Fix sysfs presence detection
46           Don't choke on unrecognized devices, part 1 (#2087)
47           Fix lm93 vid2 access (#2295)
48           No in1 on w83783s
49           Support DOS-style configuration files again (#2284)
50  Makefile: Revert changeset 4738, fix bug #2187 differently
51  Module adm1026: Various cleanups
52  Module eeprom: Hide Sony Vaio serial numbers to regular users (2.6 backport)
53                 Drop useless debugging log messages
54                 Recognize VGN as a valid Sony Vaio name prefix (2.6 backport)
55  Module gl518sm: Fix fan speed reading (2.6 backport)
56  Module gl520sm: Fix fan speed reading (2.6 backport)
57  Module lm90: Use generic i2c reads during detection (2.6 backport)
58  Module w83627hf: Enable VBAT monitoring (#2282, 2.6 backport)
59  Program Fix DDR2 SDRAM module speed decoding
60                           Update manufacturer IDs.
61  Program Private data might not be readable by non-root users
62                          Print the asset tag
63                          Fix the timestamp decoding
64  Program i2cdump: Fix I2C block mode error code
65  Program fancontrol: Detect improperly formatted FCTEMPS value (#2293)
66  Program pwmconfig: Better diagnostics in pwmdisable
67                     Give the fans some time to spin up
68                     Really hide errors on sysfs writes
69                     Deal gracefully with read-only pwm_enable files
70                     Warn about outputs found in automatic mode
71                     Fix duplicate warning message when config file is broken
72  Program sensord: Add lm85 support
73  Program sensors: Hide spurious errors on missing f71872f voltage inputs
74                   Hide spurious errors on missing adm1026 inputs
75                   Fix W83783S prefix matching
76  Program sensors-detect: Add Texas Instruments TMP401 detection
77                          Mention the f75375s driver
78                          Add SMSC LPC47B367-NC detection (no sensors)
79                          Reduce w83781d/lm78 I2C address probing range
80                          Drop PCA9540 detection
81                          Add Intel Celeron 4xx and Penryn (CPU on 45nm)
82                           detection
83                          Improve sysconfig and modprobe.d integration
84                          Add SMSC SCH5514D-NS detection (no sensors)
85                          Lower the confidence of MAX6650/MAX6651
86                          Add Fintek F71858DG detection
87                          Add Fintek F81216D detection (no sensors)
88                          Add SMSC SCH5027D detection
89                          Do not access I/O ports on PPC
90                          Move south bridge sensor detection to the right
91                           section
92                          Run chip_special_cases() earlier
93  Program unhide_ICH_SMBus: Add support for the 82801AA (ICH)
952.10.5 (20071024)
96  File i2c-dev.h: Rename I2C_FUNC_SMBUS_HWPEC_CALC to I2C_FUNC_SMBUS_PEC
97  File Add a thmc50 section
98  File useful_addresses.html: Moved to the wiki
99  Library: Fix a memory leak on error
100           Speed up sensors_get_ignored() a bit
101           Fix thmc50 support for Linux 2.6
102           Fix bmcsensors support for Linux 2.6
103           Fix lm93 VID support for Linux 2.6
104           Fix adm1024 support for Linux 2.6
105           Fix maxilife support for Linux 2.6
106           Fix magnitude of temperature offsets in Linux 2.6
107           Fix adm1026 critical temperature limits for Linux 2.6
108           Fix smsc47m192 temperature faults
109           Add sch311x support
110           Add support for adm1022 temp3
111  Makefile: Fix kernel version detection (#2187)
112  Man page sensord.8: Update
113  Module fscher: Add missing read of control register (2.6 backport)
114  Module i2c-i801: Add Tolapai support (2.6 backport)
115  Module i2c-nforce2: Declare PEC as supported (2.6 backport)
116  Module i2c-piix4: Add ATI SB700 and SB800 support (2.6 backport)
117  Module lm93: Fix an array overrun (2.6 backport)
118  Program sensord: Fix f71805f fans
119                   Synchronize the version with lm-sensors
120                   Fix a memory leak when daemonizing
121                   Fix memory leaks in command line parsing
122                   Add w83793 support
123                   Log the error code on failure
124                   Add lm87 support
125  Program sensors: Fix two memory leaks on error
126                   Add sch311x support
127                   Hide error on missing dme1737 fan and pwm
128                   Add thmc50/adm1022 support
129                   Hide error on missing adm1021 die code
130                   Handle gl518sm with no voltage input values
131  Program sensors-detect: Don't probe i2c-isa as a regular i2c bus
132                          Add Winbond W83L786NR/NG/R/G detection
133                          Add Winbond W83L771W/G detection
134                          Add Intel Tolapai SMBus detection
135                          Fix SMSC SCH311x detection
136                          Add AMD K10 CPU sensor detection
137                          Fix SMSC LPC47B357/M967 detection
138                          Select the right driver for FSC chips
139  Program Handle alternative chip lists
1422.10.4 (20070716)
143  File doc/vid: Update the sysfs paths, update the chip lists
144  File i2c-dev.h: Support I2C block reads with specified length
145  File Add a dme1737 section
146  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
147  Library: Clean up pwm symbol names translation
148           Add dme1737 support
149           Add applesmc support
150           Add abituguru3 support
151           Add f71882fg support
152           Add w83627ehf support (for Linux 2.4)
153           Add support for the w83627ehf VID function
154           Add support for the w83627ehf thermal sensor types
155           Add support for it87 fan4 and fan5
156  Man page sensors.conf.5: Update the chip statement section
157  Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
158  Module lm85: Fix setting the fan speed min limit to 0
159               Add support for the EMC6D102 extra resolution bits
160  Module thmc50: Fix the i2c address range
161  Module w83627ehf: New (2.6 backport)
162  Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
163  Program i2cdump: Use the new I2C block read function
164  Program isadump: Detect when address bit 7 is a busy flag
165                   Fix Super-I/O exit sequence for Winbond/Fintek chips
166  Program fancontrol: Use let for arithmetic evaluation
167                      No longer need awk and grep
168                      Limit calls to external programs (Linux 2.6 only)
169                      Check for configuration file validity
170                      Support optional min and max PWM values
171                      Better integration with init scripts
172                      Use linear control instead of quadratic
173  Program pwmconfig: Use smaller steps for low PWM values
174                     Support optional min and max PWM values
175  Program mkpatch: Include w83627ehf
176  Program rrd: Support non-i2c devices (hwmon class)
177               Add missing shell declarations
178               Update URI
179  Program sensors: Drop ddcmon and eeprom support
180                   Add dme1737 support
181                   Add applesmc support
182                   Add max6680 support
183                   Add abituguru3 support
184                   Add f71882fg support
185                   Fix alignment of alarm for one-limit temperatures
186                   Add w83627ehf support (for Linux 2.4)
187                   Add support for the w83627ehf VID function
188                   Add support for the w83627ehf thermal sensor types
189                   Add support for it87 fan4 and fan5
190                   Display the extra resolution bits of the emc6d102
191  Program sensors-detect: Stop Super-I/O probe after first family success
192                          Fix SMSC DME1737 detection
193                          Add /usr/sbin to the PATH (#2199)
194                          Add ATI SB700 detection
195                          Add Maxim MAX6680/MAX6681 detection
196                          Add IT8726F detection
197                          Fix IPMI support for 2.6 kernels
198                          Add detection for non-standard SMSC Super-I/Os
199                          No longer depend on i2cdetect
200                          Add SMSC SCH5317 detection
201                          Drop detection of most non-sensors I2C chips
202                          Fix ADM1022 detection
203                          Add detection of many SMSC Super-I/O chips
204                          Add Fintek F71806FG and F71862FG detection
2072.10.3 (20070319)
208  Library: Do not skip i2c adapters with only a class device and no
209            physical device. This change is required to survive the
210            planned struct class_dev removal from future 2.6 kernels.
211           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
212           Recognize i2c-isa-based devices as such even after class_dev
213            is gone
214           Compile with -D_REENTRANT
215           Fix support of Linux 2.6's max6650 driver
216           Fix max1619 support
217  Man page i2cdetect.8: Scanning range can be restricted
218  Module bmcsensors: Fix debugging messages
219  Module i2c-ali1563: Improve the status messages (2.6 backport)
220                      Fix device initialization (2.6 backport)
221  Module i2c-amd8111: Cleanups (2.6 backport)
222                      Fix initialization race (2.6 backport)
223  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
224  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
225  Module i2c-viapro: Add CX700 support (2.6 backport)
226  Module smsc47m1: Add SMSC LPC47M292 support
227                   Get rid of a useless semaphore (2.6 backport)
228  Programs i2cdetect, i2cdump, isadump: Flush output in real time
229  Program i2cdump: Cleaner output in SMBus block read mode
230  Program Fix pwmN_enable access (#2190)
231  Program sensors: Add smsc47m2 support (fans)
232                   Fix -A option (hide adapter name) on error
233  Program sensors-detect: Only probe relevant I2C addresses
234                          Drop ARP-capable device detection
235                          Add Maxim MAX6655/MAX6656 detection
236                           (Olexiy Avramchenko)
237                          Add Maxim MAX1668, MAX1805, MAX1989 detection
238                          Add VIA CX700 detection
239                          Drop legacy W83627HF ISA detection
240                          Don't bufferize stdout during probes
241                          Speed up the LM75 and LM77 detection
242                          Clean up the EEPROM detection
243                          Add Dallas DS75 detection
244                          Add SMSC LPC47M292 detection
245                          Add nVidia MCP61 and MCP65 detection
246                          Fix ADM1028 detection
247                          Add Nat. Semi. PC8347L Super-I/O detection
248                          Add SMSC SCH5504 Super-I/O detection (no sensors)
249                          Make the LM78 and W83781D detection safer
2522.10.2 (20070115)
253  RPM: Obsolete, removed
254  File doc/fan-divisors: Update
255  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
256  Library: Add support for the pc87247 driver (fans only)
257           Probe for busses before chips
258           Drop support for algorithm names
259           Add support for coretemp driver   
260           Major update/optimization of config-file scanner
261           Add config-file scanner regression tests
262           Add f71872f support
263           Add w83627dhg support (David Holl, #2157)
264           Get the i2c adapter names from
265           Add adm1029 support (Corentin Labbe)
266  Man page i2cdetect.8: Describe the output convention
267  Man page sensors.1: Update (option -c) and clean up
268  Module bmcsensors: Fix several warnings
269                     Fix fragile structure initialization
270  Module i2c-i801: Add ICH9 support
271  Module p4b_smbus: Add support for the ICH5
272  Module f71805f: Fix the device address decoding (2.6 backport)
273  Module icspll: Delete. It was useless and dangerous.
274  Program Remove spaces at end of lines
275  Program eepromer: Fix loads of warnings
276  Program i2cdetect: Make the output clearer
277  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
278  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
279                            without need of recompilation.
280  Programs dump/*: More robust handling of user inputs
281  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
282                                  Add support for non-i2c drivers
283  Program Disable debugging by default
284                         Add support for non-i2c drivers
285                         More tolerant config file parsing
286  Program sensord: Add pc87247 support (fans only)
287                   Add vt1211 support (#2150)
288                   Add w83627dhg support (David Holl, #2157)
289                   Add w83627ehf voltage support (Dave Platt)
290                   Add k8temp support (Dave Platt)
291  Program sensors: Add pc87247 support (fans only)
292                   Hide error on missing f71805f fan
293                   Handle option -c more efficiently
294                   Drop option -a (show algorithm names)
295                   Add f71872f support
296                   Add w83627dhg support (David Holl, #2157)
297                   Add adm1029 support (Corentin Labbe)
298                   Hide error on missing w83793 temp (Gong Jun)
299  Program sensors-detect: Add SMSC DME1737 detection
300                          Add Fintek F71882FG and EPoX EP1308 detection
301                          Add Intel Core thermal sensor detection
302                          Preallocate memory for I2C_FUNCS ioctl (#2138)
303                          Prevent misdetection of MAX6633/MAX6634/MAX6635
304                          Add Intel ICH9 detection
305                          Add Maxim MAX6648/MAX6692 detection
306                          Improve ADM1029 detection
307                          Add Andigilog chips detection
308                          Add Intel AMB FB-DIMM thermal sensor detection
309                          Add ATI SB600 detection
3122.10.1 (20060924)
313  File doc/developers/checklist renamed to dev/developers/release_checklist
314          with clarifications and updates for new SVN server.
315  File README.package: Delete.
316  File doc/busses/i2c-piix4: Update (2.6 backport)
317  File doc/developers/sysfs-interface: Update
318  File etc/ Add an smsc47m192 section
319                            Comment out all set statements
320                            Add an it8716 section
321                            Add a w83793 section
322                            Adjust the vt1211 section to match the new driver
323                             interface
324  Library: Fix device scan when no i2c support is present
325           Add support for W83627EHF voltage inputs and alarms
326           Add support for the smsc47m192 driver
327           Fix all memory leaks (yeah!)
328           Fix no sensors being reported as an error
329           Add support for the IT8716F and IT8718F chips
330           Add support for the W83793 chip (Yuan Mu)
331           Map the 2.6 adm1026's fan8 to fan0
332           Missing sysfs busses and classes are not errors
333           Change vt1211 temp3-7 magnitude from 1 to 3
334  Makefile: Don't grep autoconf.h on user-space targets
335            Fix depmod on non-running kernel version
336            Remove empty include directories on make user_uninstall
337  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
338  Module i2c-amd756-s4882: Improve static semaphore initialization
339                           (2.6 backport)
340  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
341                   Add ICH8 support (2.6 backport)
342                   Fix block transaction poll loops (2.6 backport)
343                   Remove PCI function check (2.6 backport)
344                   Cleanups (2.6 backport)
345  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
346  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
347                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
348                    Drop the fix_hstcfg parameter (2.6 backport)
349  Module i2c-viapro: Fix compilation with kernels < 2.4.21
350                     Add VT8237A and VT8251
351  Module lm83: Add LM82 support (2.6 backport)
352  Module vt1211: The VT1211 has no in6
353                 Rework the voltage and temperature conversions and the
354                  temperature input order to match the Linux 2.6 driver
355  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
356                  Add specific alarm and beep defines for the W83791D
357  Module w83792d: Fix PWM range (2.6 backport)
358  Program Decode depending on the memory type
359                           Decode the manufacturing date to an ISO8601 date
360                           Add the memory size computation and provide brief
361                            timing characteritics for SDRAM/DDR/DDR2 memory
362                           Add memory size computation for Rambus memory
363                           Various output cleanups and fixes
364  Program Add /usr/sbin or /usr/local/sbin to $PATH if needed
365  Program Detect and skip false positives
366  Program i2cdetect: Add a mode to print adapter functionalities
367  Program i2cdump: Restore bank after bank switching
368                   Add new mode W (read word on even register addresses)
369  Program mkpatch: Fix typo breaking f71805f
370                   Turn warnings on (-w), and fix them
371                   Print a usage message on missing command line parameters
372  Program pwmconfig: Use mktemp instead of tempfile
373  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
374                   Add smsc47m192 support
375                   Add abituguru support (Hans de Goede)
376                   Fix memory leak when printing an unknown chip
377                   Add it8716 and it8718 support
378                   Make each it87 fan and fan div optional
379                   Print missing w83791d values
380                   Add w83793 support (Yuan Mu)
381                   The adt7463 may not have in4 (#2119)
382                   Hide more vt1211 missing input errors
383                   Clearer error messages when no sensors found
384  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
385                          Add ATI IXP200/300/400 SMBus detection
386                          Prevent warning on 64-bit PCI addresses
387                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
388                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
389                           F75384S/M, F75387SG/RG and F81218D detection
390                          Add Winbond W83793R/G and W83627DHG detection
391                          Handle the W83791D driver difference between kernels
392                          Add nForce4 MCP04, MCP51 and MCP55 detection
393                          Add AMD Geode devices detection
394                          Add ITE IT8716F and IT8718F detection
395                          Add NatSemi/Winbond PC87427 detection
396                          Get driver information for busy addresses from
397                           sysfs (2.6 only)
398                          Drop the ISA IT87xxF detection
399                          Check i2c adapter functionalities before probing
400                          Add Intel ICH8 SMBus detection
401                          Add AMD K8 thermal sensors detection
402                          Simplify detection of SiS5595, VIA686 and VT8231
403                          Add Analog Devices ADM1033, ADM1034, ADT7462,
404                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
405                          Check for root user at startup
406                          Attempt to be slightly more user-friendly
407                          Add VT8237A and VT8251
408                          Remove detection of nVidia graphics adapters
409                          Use sysfs for PCI device enumeration
410                          Add generic PCI SMBus adapter detection
411                          Add generic Super-I/O logical device detection
412                          Add SMSC LPC47M172/182 detection
4152.10.0 (20060214)
416  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
417  File doc/busses/i2c-viapro: Update (2.6 backport)
418  File doc/chips/via686a: Update (2.6 backport)
419  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
420  File etc/ Do not set vrm by default
421  File i2c-dev.h: Fix union i2c_smbus_data definition
422                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
423                  Add missing parentheses around macros
424                  Drop I2C_FUNC_SMBUS_EMUL
425                  Drop I2C_FUNC_SMBUS_*_PEC
426                  Drop I2C_SMBUS_*_PEC
427  File sensors_vid.h: Drop default VRM
428  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
429           This is intentional.  Use if you still
430           need your memory SPD data.
431  Library: Big update to use libsysfs.  More TODO though.
432           Fix bus matching code for Linux 2.6 (Karsten Petersen)
433           Add f71805f, w83687thf support
434           Add platform drivers support
435           Fix sysctl warnings on x86_64
436           Restore vt1211 temp1
437  Makefile: Compile user-space programs with -Wundef
438  Module i2c-i801: Simplify the hardware PEC code
439                   Always set PEC mode explicitly before each transaction
440  Module i2c-i810: Documentation update, PCI IDs cleanup
441  Module i2c-keywest: Remove bus probing code (2.6 backport)
442  Module i2c-nforce2: Remove dead code (2.6 backport)
443                      Add the ID of the nForce4 MCP-04 (2.6 backport)
444  Module i2c-via: Remove dead code
445  Module i2c-viapro: Remove dead code
446                     Support I2C block read (2.6 backport)
447                     Code cleanups (2.6 backport)
448                     Improve debug register dump (2.6 backport)
449  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
450          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
451          i2c-sis645: Use pci_driver name to request I/O region; do
452                      not initialize i2c_adapter name to "unset" (2.6
453                      backport)
454  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
455                                              (2.6 backport)
456  Module adm9240: Cleanups (2.6 backport)
457  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
458  Module it87: Minor cleanups
459               Fix fan3_div setting bug (Anton V. Staaf)
460  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
461               Separate the register read function
462               Add PEC support for the ADM1032
463  Module via686a: Cleanups
464  Module w83627hf: Drop useless initialization step (2.6 backport)
465                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
466                   Fix alarms (Yuan Mu)
467                   Preserve fan min on fan div change (Yuan Mu)
468                   Properly handle W83627THF without VID (Yuan Mu)
469                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
470                   Add W83687THF support
471  Module w83781d: Drop W83697HF support (Grant Coady)
472  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
473                  Fix fan control mode (PWM/DC) reporting
474                  Fix fan div auto-adjust (Yuan Mu)
475                  Fix the subclient handling
476  Module w83l785ts: Minor cleanup (2.6 backport)
477  Module vt1211: Restore temp1
478  Modules vt1211, vt8231: Change default VRM to 9.1
479  Program Add lookup tables for manufacturer names
480                           Fix rounding error in PCxxxx speed computation
481                           Improve text output
482                           Improve speed under Linux 2.6
483                           Verify checksum before decoding anything
484                           Improve manufacturing location decoding
485                           Improve memory type detection
486                           Improve part number decoding
487  Program i2cdump: Drop now useless #ifdef tests
488                   Fix capability check for continuous byte mode
489  Program i2cget: New
490  Program i2cset: Add PEC support
491                  Fix argc check
492  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
493                                       Print the correct bus type if bus
494                                       functionality can be queried
495  Program isadump: Display the real addresses in flat mode
496  Program Silently skip already existing nodes
497  Program mkpatch: Include f71805f
498  Program sensord: Do not log algorithm names
499                   Drop EEPROM support (Aurelien Jarno)
500                   Add W83627EHF, F71805F/FG support
501                   Fix PC87365/PC87366 alarms
502  Program sensors: Drop free_the_label
503                   Fix compilation with uclibc (no iconv)
504                   Add f71805f, w83687thf support
505  Program sensors-detect: Drop algorithm names
506                          Do not rely on i2cdetect -l printing algo names
507                          Simplify adapter name matching mechanism
508                          New address for ADM1032, ADT7461
509                          Improve ADT7467, ADT7468 support
510                          Fix MAX6659 reported driver
511                          Add Fintek F71805F detection
512                          Add Analog Devices ADT7476 detection
513                          Add Intel 82845G detection
514                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
515                          Fix udev detection in some corner case
516                          Improve DS1621 detection
517                          Always prefer ISA access over SMBus access
5202.9.2 (20050906)
521  File doc/chips/*: Big update (2.6 backport)
522  Library: Drop ds1780-specific code (now use adm9240)
523           Fix memory leak in sensors_get_label()
524           Support /sys/class/hwmon (Linux 2.6.14+)
525           Limit stack usage in sensors_read_proc_chips()
526  Makefile: Detect 2.6+ kernels and check targets
527  Man page isaset.8: Fix typos
528  Module adm1031: Fix broken kfree() calls
529  Module i2c-ali1563: New (2.6 backport by Winbond)
530  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
531  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
532          w83627hf.c: Tag find function __init
533  Module lm93: Fix memory leak
534  Module smsc47m1: Fix PWM enable polarity on read
535  Modules w83627hf, w83781d: Allow setting fan divisor to 128
536  Program Support Linux 2.6 (Burkart Lingner)
537                           Added DDR/DDR2 frequency reporting in convenient
538                           form of DDRxxx PCyyyy
539  Program i2cdump: Properly handle short i2c block reads
540  Program Fix compile errors
541  Program mkpatch: Include i2c-ali1563
542                   Include w83792d
543  Program pwmconfig: Fix unsafe temporary file use
544  Program rrd: Support 2.6 kernels
545  Program sensord: Add support for w83637hf
546                   Support pc87360 (Henrik Brix Andersen)
547  Program sensors: Support the VAIO "VGN" prefix for eeprom
548  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
549                          Advertise the w83792d driver
550                          Improve IT8705F and IT8712F detection
551                          Merge LM82 and LM83 detection
552                          Add W83687THF detection
5552.9.1 (20050412)
556  File doc/busses/i2c-nforce2: Update
557  File doc/chips/it87: Update
558  File doc/chips/lm90: Update for adt7461
559  File doc/chips/mic74: New
560  File etc/ New sections for lm92 and w83792d
561  Library: Add support for 2.6 fscpos driver (Stefan Ott)
562           Fix sis5595 in4 (Aurelien Jarno)
563           Add support for 2.6 gl520sm driver (Maarten Deprez)
564           Add support for 2.6 bmcsensors driver (Yani Ioannou)
565           Add support for w83792d (Chunhao Huang/Winbond)
566           Add support for 2.6 adt7461 (James Chapman)
567           Add support for 2.6 lm92
568           Add support for 2.6 vt1211
569           Add preliminary support for 2.6 w83627ehf
570  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
571            Use -fno-strict-aliasing on all architectures
572  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
573  Module bmcsensors: Fix compile error
574                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
575  Module ds1621: Fix detection (Aurelien Jarno)
576  Module eeprom: Discard SPD-centric checksum module parameter
577                 Cleanup detection function (backport from Linux 2.6)
578  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
579  Module i2c-i801: Temporarily disable broken I2C block read
580  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
581                   Gelato)
582  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
583  Module i2c-viapro: Prevent repeated resets
584  Module it87: Improve Super-I/O detection
585               Limit I2C address range
586               Support VID on the IT8712F
587  Module lm75: Only initialize CMP/INT bit
588  Module lm78: Fix bug with setting negative temperature limits
589  Module lm85: Properly differentiate between ADM1027 and ADT7463
590               Add EMC6D102 support
591  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
592               Add limited ADT7461 support
593  Module lm93: Fix IN10 (+5V) scaling
594  Module mic74: New
595  Module w83627hf: Support secondary Super-I/O address
596                   Enable temp2 and temp3 if they are disabled
597  Module w83781d: Revert AS99127F temp2 and temp3 computation change
598                  Skip final initialization step for AS99127F chips
599  Module w83792d: New (Chunhao Huang/Winbond)
600  Program ddcmon: New; user-space replacement for the ddcmon driver
601  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
602  Program isadump: Handle Super-I/O keys
603  Program lm_sensors.init: Cleanups (Axel Thimm)
604  Program Add basic command-line interface
605  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
606  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
607                     Don't complain about read-only enable files (lm85)
608                     Fix handling of alternate config file name
609  Program sensord: Fix erroneous error message (Aurelien Jarno)
610                   Support sis5595 in4 (Aurelien Jarno)
611                   Support w83627thf
612                   Support the separate it8712 prefix (Aurelien Jarno)
613  Program sensors: Display sis5595 in4 (Aurelien Jarno)
614                   No errors on missing pc87360 fans
615                   Add gl520sm support (Maarten Deprez)
616                   Improve vt1211 error/ignore handling (Michael Carland)
617                   Support w83792d, w83627ehf
618  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
619                          Improve IT8705F and IT8712F detection
620                          Improve udev detection
621                          Fix DS1621 detection
622                          Add W83627EHF detection
623                          Add ATI SMBus detection
624                          Add VT1211 alias detection
625                          Warn if chip modules not found
626                          Add i2c-ipmi to list if bmcsensors is on it
627                          Add PC87591 detection
628                          Search for correct udev db file name
629                          Add nForce3 250Gb and nForce4 detection
6322.9.0 (20041228)
633  NOTE: Requires i2c-2.9.0 or newer!
634  File README.thinkpad: Update
635  File doc/chips/it87: Cleanups
636  File doc/chips/lm63: New
637  File etc/ Set via686a voltage limits
638  File kernel/chips/ Resync module list with mkpatch
639  File kernel/include/sensors_compat.h: Define __devexit_p if missing
640                                        (kernels 2.4.16 and older)
641  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
642                             and dec_use removed in release 2.8.0
643  Modules (all chip drivers): Remove owner from i2c_driver; pass
644                              controlling_mod to i2c_register_entry() again
645  Module bmcsensors: Support function 1/x
646  Module i2c-amd756: Display the real bus name
647  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
648  Module i2c-i801: Support i2c block read (ICH5 and higher)
649                   Add PEC support for ICH6
650                   Add support for ICH7
651  Module i2c-ipmb: Remove from build since it doesn't work
652  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
653  Module icspll: Fix compilation
654  Module lm63: New driver for the National Semiconductor LM63
655  Module lm83: Use signed types for temperatures
656               Check limits on register writes
657  Module lm87: Round voltages properly
658               Retry on read errors (David Knierim)
659               Less agressive init (no reset)
660  Module lm90: Use signed types for temperatures
661               Check limits on register writes
662  Module lm93: Added module parameter for VID pin input thresholds.
663               Fix typo in dynamic VID alarms
664               Adds a couple log messages for failed transactions (David
665               Knierim)
666               Fix compilation breaking C99-ism (Axel Thimm)
667               Fix block read retries
668  Module pc87360: Support secondary Super-I/O address
669  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
670  Library: Add lm63 support
671           Add lpc47b397 support
672  Programs *.init: Rename lockfile to match file name
673  Programs i2cset, isaset: Written byte/word can be masked
674  Program Find eeproms on non-0 i2c bus too
675  Program mkpatch: Include i2c-amd756-s4882
676  Program pwmconfig: Handle new (well, back to old) pwm files names for
677                     Linux 2.6.10 and up
678  Program sensord: Do not scale load average (Aurelien Jarno)
679  Program sensors: Add lm63, lpc47b397 support
680                   Support DDR2 memory module EEPROMs (Rudolf Marek)
681                   Support only one location for the default configuration file
682                   Display the default configuration file location in --help
683                   Simplify the configuration file opening code
684  Program sensors-detect: Improve LM63 detection
685                          Discard IBM Thinkpad detection code
686                          Add PCA9556, LPC47B397, ICH7 detection
687                          Fix W83792D detection, add W83791SD detection
6902.8.8 (20041007)
691  File doc/donations: Update
692  File doc/lm_sensors-FAQ.texi: Add 4.6.1
693                                Update 4.7
694  File doc/chips/gl518sm: Update "iterate" info
695  File doc/chips/it87: Discard outdated module parameters
696  File doc/chips/lm75: LM77 is not supported
697  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
698  File doc/chips/lm93: New
699  File doc/chips/w83l785ts: Improvements
700  File etc/ Fix it87 lines order
701                            Update lm87 section
702  File kernel/include/sensors_vid.h: Support VRM 10.0
703  Library: Support 2.6 adm1025
704           Preliminary support for 2.6 lm87
705           Support 2.6 adm9240
706           Allow an alternative sysfs file name for chip features (2.6)
707           Fix lm83 critical limits (2.6)
708           Add lm93 support
709           Prevent some procfs errors from being silently ignored
710  Makefiles: Implement user_uninstall (Rudolf Marek)
711             Spoof LOGNAME and HOSTNAME when making html man pages
712  Module adm1025: Refine detection
713                  Update limit registers again (revert of 2.8.1)
714                  Init high limits if they read 0
715                  Fix conversions
716  Module lm75: Refine detection
717  Module lm78: Fix init
718  Module lm83: Default to kind lm83 if forced.
719               Fix temperature macros.
720  Module lm90: Add LM86, MAX6657 and MAX6658 support
721  Module lm93: New
722  Module mtp008: Fix the setting of limits on temp2
723  Module pca9540: Refine detection
724  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
725                  Support VID
726                  Fix fan_div file when fan count is less than 3
727                  Additional init and debug
728  Module smsc47m1: Fix pwm_enable being inverted
729  Module w83627hf: Add alternate VCORE/in0 calculation method
730                   Remove reset of chip by driver on initialization
731  Module w83781d: Fix default VRM for w83791d
732  Module w83l785ts: Implement read error handling (backport from 2.6)
733  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
734                    Wait for user input to continue (as opposed to 5 sec
735                    delay), can be skipped with -y
736                    Various cleanups and code refactoring
737                    Update manual pages
738  Program fancontrol.init: New (Dean Takemori)
739  Program Restore fans on many kinds of errors/interrupts
740  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
741                           (Giuseppe Della Bianca)
742  Program Detect devfs and refuse to run
743                    Use mknod's mode instead of chmod
744  Program mkpatch: Include xeontemp and pc87360
745  Program sensors: Rework adm1025 support
746                   Display pc87365/pc87366 VID
747                   Improve smsc47m1 support
748                   Hide 2.6 adm1027 alarm_mask being missing
749                   Print VRM version for all supported chips
750  Program sensors-detect: Support LM93, LM77, LM63
751                          Support PC8739x Super-I/O family (no sensors)
752                          Fix PCA9540 support
753                          Refine ADM1025/ADM1025A detection
754                          Refine LM75 detection
755                          Ignore missing /proc/modules (Andras Bali)
756                          Script-wide Perl cleanups
757                          Support udev
758                          Support W83792D, LM96000
7612.8.7 (20040611)
762  File README.thinkpad: Update 24RF08 status
763  File doc/fan-divisors: More info on accuracy
764  File doc/lm_sensors-FAQ.texi: Update 4.27
765  File doc/chips/adm1031: New
766  File doc/chips/max1619: New
767  File doc/chips/pc87360-fan: Renamed to pc87360
768  File doc/chips/pc87360: Big update
769  File doc/chips/w83781d: Update AS99127F documentation
770  File etc/ Add comments about BP6 voltages
771                            Add comment on Asus A7V8X-X VCore
772                            Misc fixes to lm80 section
773                            Update via686a section
774                            New lm99 section
775                            Add section for LM85-like chips
776                            Preliminary pc87366 section
777                            Add comment on GL520SM application modes
778                            Document beep_enable (Aurelien Jarno)
779                            Preliminary max1619 section
780                            Preliminary adm1030 and adm1031 sections
781  Library: Fix 2.6 VRM
782           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
783           Fully support the PC87360 family
784           Support the lm99
785           Add version and date strings
786           Support 2.6 max1619
787  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
788  Man page i2cdetect.8: document new command line flags
789  Man page i2cdump.8: More details on how i2cdump can write to a chip
790  Modules (all chip drivers): Rework memory allocation scheme.
791  Module adm1031: New (Alexandre d'Alton)
792  Module bmcsensors: Fix oops by creating thread for initialization
793  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
794  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
795          asb100.c, lm92.c: Use swab16
796  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
797  Module gl520sm: Less agressive initialization process
798                  Fix temp1 limits being unsettable in application
799                  Ensure that temp2 and in4 are not used at the same time
800  Module i2c-i801: Support 6300ESB and ICH6
801  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
802  Module i2c-sis645: Add support for SiS655
803  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
804  Module lm90: Support LM99 and LM89
805  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
806               Get rid of useless i2c_probe call
807  Module max1619: New (Alexey Fisher)
808  Module p4b_smbus: Add support for mobile versions of the 82801
809                    (Axel Thimm)
810  Module pc87360-fan: Renamed to pc87360
811  Module pc87360: Also support PC87365 and PC87366
812                  Add write support
813                  Correctly set the chip name depending on the type
814                  Add voltage and temperature support
815                  Fix fan speed computation
816                  Retrieve fans configuration from Super-I/O space
817                  Export pwm_enable (read-only)
818                  Honor pwm invert bits
819                  Clear fan alarms after we read them
820                  Do not read fan data when monitoring is disabled
821                  Do not include SENSORS_INSMOD stuff
822                  New module parameter: init
823                  Fan clock dividers change automatically
824                  Add thermistor dupport
825  Module smsc47m1: Lock on reads and writes
826                   Various PWM fixes
827  Module thmc50: Fix address range
828  Module via686a: Fix voltage roundings
829                  Simplify temperature conversions
830  Module w83781d: Drop PWM support for as99127f
831                  Invert AS99127F beep bits in driver rather than user-space
832  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
833  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
834  Program New
835  Program i2cdetect: Adapt probing method to address
836                     Add -q and -r flags to force probing methods
837                     Allow probing range selection
838  Program isadump: Major improvements
839  Program isaset: New
840  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
841                   module
842                   Include i2c-nforce2
843  Program sensord: New --rrd-no-average parameter
844                   Synchronize time slots with rrd
845                   Fix W83781D temp3 alarm (Aurelien Jarno)
846                   Add ASB100 support (Andrew May)
847  Program sensors: Fully support the PC87360 family
848                   Fix lm80 temperature alarms
849                   Support the lm99
850                   Do not invert AS99127F beep bits anymore
851                   Fix W83781D temp3 alarm (Aurelien Jarno)
852                   Print library version string
853  Program sensors-detect: Rework Super I/O detection
854                          Support SiS655/SiS96x
855                          Support ADT7461 and ADT7467
856                          Better support for ADM1027, ADT7460 and ADT7463
857                          Explicitly support ADM1028
858                          Scan all logical devices of PC87365 and PC87366
859                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
860                          Detect eeproms with software write protect (not
861                          enabled by default)
862                          Support ALi 1563 (2.6 only)
863                          Drop LTC1710 support
864                          Use byte reads for probing on ranges 0x30-0x37 and
865                          0x50-0x5F
866                          Improve LM89 and LM99 support
867                          Support GeForce FX 5900 video cards
868                          Fix devfs misdetection (Aurelien Jarno)
869                          Detect 6300ESB, ICH6
870                          Fix double detection of ISA chips
871                          Support MAX1619
872                          Support PC87373 Super-I/O
873                          Fix unknown adapters appearing multiple times
874                          Refine MAX6650/MAX6651 detection
8772.8.6 (20040405)
878  File README.thinkpad: Update status
879  File doc/chips/pca9540: New
880  File doc/chips/pc87360-fan: New
881  File etc/ Update pcf8591 default configuration
882  Library: Switch to new sysfs naming standard
883           Fix gcc 3.3 warnings (Philipp Thomas)
884           Support 2.6 ds1621 and pcf8591
885           Change pcf8591 magnitudes
886           Support pc87360-fan
887  Makefile: Install shared library 755
888  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
889  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
890  Modules ds1621, pcf8591: Check for capabilities before using them
891                           (Aurelien Jarno)
892  Modules pcf8574, pcf8591: Cleanups
893  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
894  Module adm1021: Better detection and initialization
895  Module pca9540: New driver for the Philips PCA9540
896  Module pc87360-fan: New driver for the National Semiconductor PC87360,
897                      PC87363 and PC87364 Super I/O chips
898  Module smsc47m1: Support the LPC47B27x
899  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
900  Program i2cdetect: Skip special addresses by default
901  Program sensord: Prevent null pointer dereference (Tim Toohey)
902  Program sensors: Print the degree symbol in the terminal's current locale
903                   (Aurelien Jarno)
904                   Update pcf8591 print to support 2.6 driver
905                   Support pc87360-fan
906  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
907                          Improved SiS chips support
908                          Add a white list of IBM systems
909                          Drop support of undetectable adapters
910                          Fix smart battery detection
911                          Add smart battery charger and manager detection
912                          Rework adm1021 and clones detection
913                          The PC87360, PC87363 and PC87364 Super I/O chips
914                          now have a (preliminary) driver
915                          Rework Super I/O detection
916                          Better support of devfs
917  Program New
9202.8.5 (20040305)
921  File doc/chips/SUMMARY: Update
922  File etc/ Epox 8K3A tweaks. (Kronos)
923  Makefiles hotplug and rrd: Remove -o and -g arguments to install
924  Module bmcsensors: Increase max SDRs to 100
925  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
926  Module i2c-amd756: Don't register driver to avoid driver conflicts.
927                     (Daniel Rune Jensen)
928  Module it87: Better temperature sensor types handling (Takeru Komoriya)
929               Fix reset=1 (Takeru Komoriya)
930  Module lm80: Code cleanups
931  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
932  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
933  Module w83627hf: Add w83637hf support
934                   Fix exported name
935                   Fix PWM in w83627thf
936                   Preserve other bits when forcing temp2/3 to comparator mode
937  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
938                  Remove asb100 support
939  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
940          Define driver ID if i2c-id.h doesn't have it yet.
941  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
942          Backport oops fix from Linux 2.6.
943  Modules (all chips): Get rid of useless headers
944  Program Add sysfs support
945  Program sensors: Add w83637hf support
946                   Add support for Shuttle Ethernet EEPROMs
947                   Drop 2.6 subclient detection
948  Program sensors-detect: Add heuristics to the LM80 detection function
949                          Add support for W83L785R, improve W83L784R/AR
950                          Add GeForce FX 5600 as supported by rivatv
951                          More Super IO chips, better handling
952  Library: Update to match renames in fscher
953           Reverse temporary changes to w83l785ts mappings
954           Fix vt1211 and vt8231 uch_config not being writable
955           Add 2.6 lm80 support
956           Add w83637hf support
957           Remove in6 and temp1 from vt1211 and vt8231
958           Add support for Shuttle Ethernet EEPROMs
959           Remove unused as99127f features
9622.8.4 (20040207)
963  File doc/lm_sensors-FAQ.texi: Update 4.20.
964  File doc/chips/it87: Change hyst to low
965  File doc/chips/w83l785ts: New
966  File etc/ Change it87 hyst to low
967                            Fix w83697hf supposed to have temp3
968                            Limits initialization for adm1025/ne1619
969                            Handle fscher voltage conversions
970                            Add Tyan Trinity S2495 KT400 setup (Eric
971                              Schumann)
972                            Fix fscher fan labels (Reinhard Nissl)
973  Library: Better 2.6 eeprom support
974           Change it87 hyst to low
975           Add 2.6 gl518sm, fscher support
976           Fix 2.6 negative voltages handling
977           Temporary fix to w83l785ts mappings
978  Module adm1025: Separate prefix for NE1619
979  Module adm1026: Remove use of temporary ID
980                  Define addresses as a range
981  Module bmcsensors: Fix reservations
982  Module fscher: Externalize voltage conversions
983  Module eeprom: Remove memtype
984  Module i2c-piix4: Fix resource release error
985                    Various cleanups
986  Program Add sysfs support
987  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
988                   Drop linux 2.2 support
989                   Add w83627hf
990  Program sensors: Do not show algorithm by default
991                   Cleanup temperature unit display code
992                   Cleanup label spacing code
993                   Fix output to UTF-8 terms (Marcel Sebek)
994                   Simplify gl518sm print
995                   Do not ignore errors in FSC chips prints
996                   Fix w83l785ts print
997                   Cleanup FSC chips prints
998  Program sensors-detect: Fix PATH issues
999                          Correctly point to the fscher driver
10022.8.3 (20040115)
1003  File lm_sensors.spec: Update
1004  Library: Add 2.6 eeprom, lm90 support
1005           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
1006  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
1007  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
1008  Module i2c-amd756: Fix byte writes
1009  Module i2c-tsunami: Cleanups (Daniel Nilsson)
1010  Module it87: Fix sg_tlx writes; fix sensor type reporting;
1011               add 8712 Super I/O detection;
1012               remove initialization of temp_type and fan_ctl;
1013               remove init and temp_type module parameters
1014  Module lm90: Handle hysteresis differently
1015  Module smartbatt: Fix detection, magnitudes, temp
1016  Module w83781d: Fix negative voltages
1017  Module w83l785ts: New
1018  Program eeprog: Make 8 bit mode the default
1019  Program fancontrol: Improvements, fixes, support 2.6 kernels
1020  Program mkpatch: Add lm75.h
1021  Program pwmconfig: Improvements, fixes, support 2.6 kernels
1022  Program sensors: Add ASB100 support
1023  Program sensors-detect: Add 8712 Super I/O detection;
1024                          add W83L785TS detection
10272.8.2 (20031211)
1028  IMPORTANT: Limit initialization removed from all chip drivers!
1029             If you didn't run 'sensors -s' in the past you may need to now!
1030  File Change lm75 scaling back to 1;
1031                        Add example for asb100
1032  Library: Fix bmcsensors scaling, increase number of sensors;
1033           Add w83627thf support; Advance version to 3.0.0;
1034           Add hermes, ADM1032, ASB100 support;
1035           Add it87 sensor type support;
1036           Add sysfs support for kernel 2.6;
1037           Fix memory leaks
1038  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
1039             Fail if no kernel .config file exists;
1040             Don't build module dependencies for user and user_install
1041  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
1042          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
1043          smsc47m1, thmc50, via686a, w83627hf, w83781d:
1044          Remove initialization of limits by driver.
1045  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
1046  Modules (chip): Init cleanups
1047  Module asb100: New
1048  Module bmcsensors: Fix voltage scaling, voltage and fan limits
1049  Modules ddcmon, eeprom: Add failure printks
1050  Module fscher: New (Fujitsu-Siemens Hermes driver)
1051  Module i2c-amd756: Fix AMD8111 support
1052  Module i2c-amd8111: Fix byte writes
1053  Module i2c-nforce2: Fix byte writes
1054  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
1055  Module i2c-sis630: Sync with 2.6.0-X driver version
1056  Module i2c-viapro: Add support for Via 8237
1057  Module it87: Add pwm and "smart guardian" support;
1058               add it87 sensor type support
1059  Module lm75: Fix negative voltages
1060  Module lm90: Add ADM1032 support
1061  Module w83781d: Fix 791d and 627hf detection
1062  Module w83627hf: Add VID support
1063  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
1064  Program eeprog: New
1065  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
1066                                       support sysfs for i2c bus search
1067  Program i2cdetect: Add -l option to list busses
1068  Program i2cdump: Add 'c' mode for consective address reads
1069  Program mkpatch: Cleanups
1070  Program pwmconfig: Handle multiple fans controlled by a single pwm
1071  Program sensord: Remove ddcmon support
1072  Program sensors: Add ADM1032 support; add messages for sysfs
1073  Program sensors-detect: Prefer Super I/O drivers;
1074                          Fix W83627HF and W83791D detection; detect CSB6;
1075                          Detect ADM1029, ADM1030, ADM1031;
1076                          Detect W83637HF, W83697UF;
1077                          Add it87 sensor type support; add sysfs support
1078                          Reduce lm80 misdetects; remove PCFxxxx "detection"
1079                          Detect VT8237 (KT600)
1080                          Use VPD instead of DMI+ACPI for Thinkpad detection
1081                          Suggest new asb100 driver instead of w83781d
10842.8.1 (20031005)
1085  NOTE: Requires i2c-2.8.1 or newer!
1086  File Improved adm1025 section
1087                        Default temp labels for as99127f
1088                        Improved lm83 section
1089                        Better support for Asus A7V8X-X
1090  File doc/chips/SUMMARY: Add SMSC manufacturer ID
1091  File doc/chips/adm1025: Add decent documentation (almost new)
1092  File doc/chips/lm83: Known motherboards list update, misc updates
1093  Library: Change adm1025 names (hyst/over become low/high)
1094           Swap adm1025 temp1 and temp2 to match the driver's order
1095           Advance version to 2.0.1
1096           Update lm83 support
1097           Add support for lm90, xeontemp, max6650
1098           Add separate messages for read and write errors
1099           Add missing message for parse error
1101  Modules (various): Fix includes for compilation on Alpha
1102                     Use the new i2c_delay function instead of the various
1103                     do_pause functions
1104  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
1105  Module i2c-nforce2: Cleanups
1106  Module i2c-i810: Use readl/writel for portable access to PCI memory
1107  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
1108  Module i2c-savage4: Use readl/writel for portable access to PCI memory
1109  Module i2c-sis630: Fix detection
1110                     Add block data read/write support
1111  Module i2c-sis645: Detection method change/bugfix
1112  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
1113  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
1114  Module adm1025: Major driver update
1115                  Add support for Philips NE1619
1116                  Simplify the driver a lot (unified voltages, unified
1117                  temperatures and much more)
1118                  Fix default voltage limits
1119                  Change default temperature limits
1120                  Swap remote and local temperatures to match the internal
1121                  registers order (make the code unification possible)
1122                  Export remote diode fault through alarms
1123  Module ddcmon: Major update
1124                 Add half a dozen new features
1125                 Add checksum parameter (same as for the eeprom module)
1126                 Fix monitor limits
1127  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
1128  Module lm78: Fix a fan_div/fan_min bug
1129  Module lm83: Add t_crit and alarms support
1130  Module lm90: New
1131  Module max6650: New
1132  Module saa1064: New
1133  Module smsc47m1: Add support for 47M142
1134  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1135                   enhance w83627thf support
1136  Module w83781d: Enhance chip detection; clean up error returns;
1137                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1138  Module xeontemp: New
1139  Program Add Direct Rambus (DRDRAM)
1140                           Mark Rambus as unsupported
1141  Program New
1142                          Interfaces between our eeprom module and
1143                          parse-edid from the read-edid project
1144  Program p4b_smbus: Fix SMP compilation
1145  Program sensord: Add support for IT87 (Mike Black)
1146                   Change ADM1025 support to match the changes made to
1147                   the library
1148  Program sensors: Rewrite and enhance EEPROM support
1149                   Change LM83 and ADM1025 support to match the changes
1150                   made to the library
1151                   Add DRDRAM support to print_eeprom
1152                   Exit(1) on /proc write failure (Malte Starostik)
1153                   Add LM90, MAX6650 support
1154  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1155                          Add support for LM82, LM86, LM89
1156                          Improved W83781D family detection
1157                          Add support for AS19927F rev.2, ASB100 Bach
1158                          Add support for Asus Mozart-2 (3 types)
1159                          Add support for NE1619
1160                          Add support for FSC Hermes
1161                          Make sure /sbin is in the user's path
1162                          Fix EEPROM detection
1163                          Automatic module.conf and /dev/i2c* detection
1164                          Improve LM82 and LM83 detection
1165                          Handle "to-be-written" cleanly
1166                          Add detection for 47M14x Super I/O
1167                          Handle the one-address-many-chips-same-driver
1168                          case
11712.8.0 (20030714)
1172  NOTE: Requires i2c-2.8.0 or newer!!!
1173  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1174                  2.4.13 or later required for mkpatch.
1175  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1176                  i2c package
1177  File doc/chips/fscscy: Add watchdog documentation
1178  File Fix vt1211/vt8231 thermistor calculations
1179  File sensors.h: Now automatically generated
1180  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1181           add adm1026, lm83, lm85, w83791d support;
1182           Advance version to 2.0.0
1183  Makefiles: Generate warnings if new library won't be found by;
1184             Modules now install in kernel/drivers/i2c/[busses,chips];
1185             Ensure that headers in /usr/local/include are used first;
1186             Don't use /usr/include headers for modules;
1187             Handle multiple UTS_RELEASE definitions in linux/version.h;
1188             Automatically generate kernel/include/sensors.h;
1189             Remove old gzipped modules; remove old misc directory if empty;
1190             Remove pre-2.4 installation method;
1191             -Wall now the default;
1192             Add new targets user, user_install, and help;
1193             Run depmod after module installation
1194  Modules (all): Cleanups including
1195                - Add #include <i2c-proc.h>
1196                - C99 initializers
1197                - Remove #ifdef MODULE
1198                - Remove #ifndef THIS_MODULE
1199                - Remove #ifndef MODULE_LICENSE
1200                - Remove other 2.1/2.2 #ifdefs
1201                - Remove #include "sensors.h", copy SYSCTL defs to module
1202                - Remove excess #includes
1203                - Remove argument in i2c_register_entry()
1204                - Remove dummy xxx_command() definition
1205                - Remove EXPORT_NO_SYMBOLS
1206                - Remove init_MUTEX #define
1207                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1208                  no longer adjust their own refcounts
1209                - Use module_init() and module_exit()
1210                - Update to new i2c_driver struct definition
1211  Modules (bus PCI): Convert to PCI-module-style initialization
1212  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1213  Module adm1021: Set alarm on failed reads and report old value;
1214                  merge changes from kernel 2.5.54
1215  Module adm1026: New
1216  Module bmcsensors: Fix compile when DEBUG=1
1217  Modules ddcmon, eeprom: Use i2c block reads if possible;
1218                          better error handling
1219  Module ds1307: Add to Makefile
1220  Module gl520sm: Fix temperature over/hyst writes
1221  Module lm75: merge changes from kernel 2.5.54
1222  Module lm83: New
1223  Module lm85: New
1224  Module i2c-ali1535: Check for invalid transaction
1225  Module i2c-ali15x3: Check for invalid transaction
1226  Module i2c-amd756: merge changes from kernel 2.5.54;
1227                     check for invalid transaction
1228  Module i2c-amd8111: merge changes from kernel 2.5.54
1229  Module i2c-i801: Add support for 82801EB (ICH5)
1230  Module i2c-i810: Fix for some chips
1231  Module i2c-nforce2: New
1232  Module i2c-piix4: Check for invalid transaction
1233  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1234  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1235        north bridges; SiS962 and SiS963 south bridges
1236  Module i2c-viapro: Check for invalid transaction
1237  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1238          pwm and pwm enable support; update docs
1239  Module smbus-arp: Check adapter for HW or SW PEC support;
1240                    add reset option
1241  Module w83781d: Add support for w83791d
1242  Module w83627hf: New
1243  Program Recognize DDR and Rambus
1244  Program eeprom: Fix writes for small eeproms
1245  Program eeprom, eepromer: Use local i2c-dev.h for build
1246  Program fancontrol: New
1247  Program lm_sensors.init: Call sensors -s in start()
1248  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1249                   Add adm1026,lm85 support;
1250                   Remove sensors.c file; add sensors_compat.h;
1251                   Remove patches to i2c-core.c and drivers/char/mem.c;
1252                   Now works only for kernels 2.4.13 or later
1253  Program p4b_smbus: Fix 'make install';
1254                     Install in same place as other modules;
1255                     Clear correct bits in config word
1256  Program pwmconfig: New
1257  Program sensors: add adm1026, lm85, w83791d support
1258  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1259                          w83627hf, w83627thf, w83697hf);
1260                          Add support for SiS651, SiS961, SiS745, SiS746;
1261                          Support dmidecode 2.0 and later;
1262                          Fix "C" format error;
1263                          Add support for adm1026, 82801EB (ICH5), W83791D;
1264                          Add support for w83l785ts, nForce2;
1265                          Fix UTF-8 incompatibility;
1266                          Better support for lm75;
1267                          Add support for lm83
12692.7.0 (20021208)
1270  NOTE: Requires i2c-2.7.0 or newer.
1271  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1272  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1273  File doc/busses/i2c-sis645: Add license
1274  File doc/chips/lm92: Add license, features
1275  File doc/chips/maxilife: Add license, parameters, features
1276  File doc/chips/smartbatt: Complete rewrite
1277  File doc/chips/vt8231: Add license, parameters
1278  File Add section for lm75; complete the lm78 section
1279  Library: Add support for MC1066; add multiple VRM version support for lm87;
1280           enhance adm1023 support; initial support for Sony Vaio eeprom;
1281           add support for bmcsensors; add hacks for additional dummy drivers
1282  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1283            add flags for x86_64 compiles
1284  Module adm1021: Add support for MC1066
1285  Module bmcsensors: New
1286  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1287                   kernel 2.5.43; fix 2.2 kernel compiles
1288  Module gl518sm: Iterate allowed only for rev 0x00
1289  Module i2c-amd756: Configure base address for nForce support;
1290                     check for uninitialized base address;
1291                     add support for amd8111 (SMBus 1.0)
1292  Module i2c-amd8111: New (SMBus 2.0)
1293  Module i2c-ipmb: New
1294  Module i2c-ipmi: New
1295  Module i2c-keywest: Sync with kernel 2.4.20
1296  Module i2c-sis630: Add support for SiS730
1297  Module i2c-sis645: Improve support for SiS645/961;
1298                     add support for SiS645DX/961 and SiS735;
1299                     fix 2.2 kernel compiles
1300  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1301  Module lm87: Add multiple VRM version support
1302  Module vt1211: Fix inx limits and alarms; fix in0
1303  Module vt8231: Fix inx limits and alarms; fix in0
1304  Module w83781d: Fix in0/in1 initialization
1305  Module smartbatt: New
1306  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1307  Program Code cleanup; valid HTML; better HTML output;
1308                           stop decoding on checksum error
1309  Program dmidecode: Fix read bug; upgrade to version 1.8
1310  Program doc-insmod: Complete rewrite; fix author output
1311  Program doc-features: Complete rewrite; handle missing sysctl entries;
1312                        handle unknown prefix with suggestion
1313  Program lm_sensors.init: Remove spaces bug; add green/red output
1314  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1315  Program rrd: Add sanity limits to newly-created RRD.
1316  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1317  Program sensors: Add support for MC1066, Rambus Rimms;
1318                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1319                   initial support for Sony Vaio eeprom
1320  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1321                          IPMI, AMD8111; add help if no sensors found;
1322                          add ACPI method for IBM system detection;
1323                          work with old Perl versions again;
1324                          initial support for Sony Vaio eeprom
13262.6.5 (20020915)
1327  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1328  File Fix temp[23] for as99127f; add vt8231
1329  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1330  Module dmi_scan: new
1331  Module ds1621: Fix enable/disable
1332  Module eeprom: Do not corrupt 24RF08's when checksum=1
1333  Module i2c-i801: Check for uninitialized base address;
1334                   enable if not enabled
1335  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1336  Module i2c-sis630: new
1337  Module i2c-sis645: new
1338  Module lm92: Fix in-kernel initialization
1339  Module via686a: Remove VT8231 support
1340  Module vt8231: new
1341  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1342  Program dmidecode: new
1343  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1344  Program mkpatch: Add entries for, lm92,
1345                   pcf8574, pcf8591, smsc47m1, vt1211;
1346                   add dmi_scan
1347  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1348  Program lm_sensors.init: fix stop()
1349  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1350                   add support for logging loadavg in RRD;
1351                   fix down-converting raw labels for RRD;
1352                   update chip support, still behind sensors
1353  Program sensors: Add /usr/local/etc to config file path;
1354                   fix -c and -u flags; add vt8231
1355  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1356                          refuse to run on IBM systems;
1357                          fix sysconfig module numbering;
1358                          change quick write to not corrupt 24RF08's
13602.6.4 (20020719)
1361  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1362  File doc/vid: New
1363  File include/sensors_vid.h: New
1364  File Add vt1211, smsc47m1
1365  Library: Add multiple VRM version support for adm1025, w83781d;
1366           fix 'flex scanner jammed' on some systems;
1367           add vt1211, smsc47m1, lm92;
1368           fix access mode checking
1369  Makefiles: For 2.4+ kernels, modules now install in
1370             kernel/drivers/[i2c,sensors] , not misc/ , and
1371             'make install' removes old versions in misc/ .
1372             Use $CFLAGS and $CPPFLAGS if defined.
1373  Module adm1025: Add multiple VID version support
1374  Module ds1307: new
1375  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1376                     reliability improvements
1377  Module i2c-hydra: Flush posted writes
1378  Module i2c-i801: Add support for 82801DB (ICH4)
1379  Module i2c-i810: Flush posted writes
1380  Module i2c-savage4: new
1381  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1382  Module i2c-voodoo3: Flush posted writes
1383  Module ds1307: New
1384  Module lm92: New
1385  Module smbus-arp: new
1386  Module smsc47m1: new
1387  Module via686a: Add support for VT8231 sensors
1388  Module vt1211: new
1389  Module w83781d: Add multiple VID version support; fix temp alarms
1390  Program eeprom: new
1391  Program i2cdump: Add smbus block command specification, add PEC support
1392  Program lm_sensors.init: new
1393  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1394                   pcf8574, pcf8591, smsc47m1, vt1211
1395  Program p4b_smbus: Add support for ICH4
1396  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1397  Program sensord.init: Renamed, was prog/init/sensors
1398  Program sensord: Major update, now requires rrd source;
1399                   not compiled by default
1400  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1401                   (don't display algo. and adap.) option;
1402                   add vt1211, smsc47m1, lm92
1403  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1404                          add 82801DB, LM85; fix perl warnings;
1405                          generate /etc/sysconfig/lm_sensors for
1406                          lm_sensors.init script
14082.6.3 (20020322)
1409  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1410  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1411  File doc/chips/it87: add more temp_type help
1412  File Un-ignore it87 in8, temp3, fan3;
1413                        add adm1021 section; add lm87 AIN[1,2] template;
1414                        swap negative voltage limits for 782d,783s,627hf,
1415                        697hf,it87; add more it87 help; swap neg. voltage
1416                        limits for lm78(-j), lm79, w83781d, as99127f
1417  Library: Add PCF8591, W83697HF, ADM1023 support;
1418           fix w83* fan_min computes;
1419           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1420  Module adm1024: Add MODULE_LICENSE("GPL")
1421  Module bt869: Add s-video out and DVD resolution support
1422  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1423  Module fscscy: implement min/max for voltages and fans
1424  Module i2c-amd756: Add support for AMD768
1425  Module i2c-i810: Add support for 810E
1426  Module i2c-keywest: Big update, sync with kernel 2.4.18
1427  Module i2c-piix4: Check for uninitialized base address
1428  Module i2c-sis5595: Blacklist 645, 735
1429  Module i2c-viapro: Check for uninitialized base address
1430  Module gl518sm: Standardize /proc entries in0-3
1431  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1432               fan -> fan1; fix temp2 limit writes
1433  Module pcf8574: Add support for PCF8574A; /proc interface changed
1434  Module pcf8591: new
1435  Module sis5595: Blacklist 645, 735
1436  Module w83781d: Add W83697HF support; allow force_subclients parameter
1437                  for Tyan 2460
1438  Programs, Update for new /proc names
1439  Program new
1440  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1441                   add text output
1442  Program init/sensors: New SysV init script
1443  Program Add support for fscscy, add more help entries
1444  Program p4b_smbus: new
1445  Program rrd: Install summ_week.cgi
1446  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1447                   clean up chassis intrusion prints
1448  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1449                          fix Via686a and it87 detection;
1450                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1451                          fix uninitialized values; it87 beats lm78
14532.6.2 (20011118)
1454  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1455  Chip Modules (all): malloc.h -> slab.h
1456  Modules (all): Add MODULE_LICENSE("GPL")
1457  File doc/FAQ: More updates and additions
1458  File Fix it87 in5,in6 (-12,-5) calculations
1459  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1460           update it87 alarm ID's.
1461  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1462  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1463  Module i2c-amd756: Improve busy handling/printk's
1464  Module i2c-i801: Add 82801CA/CAM support
1465  Module i2c-keywest: Sync with PPC people, it works now
1466  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1467  Module i2c-viapro: Add Via VT8233 support
1468  Module it87: Merge alarm_* /proc entries to alarms
1469  Module sis5595: Fix support for rev B0
1470  Module via686a: Make limit initializations reliable
1471  Module w83781d: Allow init=0 parameter to bypass initialization
1472  Program isadump: Add flat address space (PCI) support
1473  Program Add support for i2c-ali1535, adm1024, ds1621,
1474                      fscpos, it87, maxilife, mtp008
1475  Program sensors: Fix w83781d temp precision
1476  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1477                          Fujitsu Poseidon and Scylla,
1478                          Intel 82443MX and 82801CA/CAM detection,
1479                          add ITE 8172G detection (driver in kernel 2.4.10)
14812.6.1 (20010830)
1482  File BUGS: Updated
1483  File doc/FAQ: More updates and additions
1484  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1485  File Fix/enhance it87 section
1486  Library: ds1621 and it87 updates
1487  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1488  Module i2c-amd756: Add AMD 766 support
1489  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1490  Module i2c-piix4: Add Serverworks CSB5 support
1491  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1492  Module adm1025: Fixed temp2 min/max writes
1493  Module ds1621: Add 12-bit precision mode
1494  Module it87: Enable all alarms, add in8 support, add sensor type selection
1495  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1496                  remove support for module
1497  Module sis5595: Recognize unsupported chips and refuse to load
1498  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1499  Program eepromer: new
1500  Program Fix dependencies on i2c-proc; disallow compilation
1501                      of sensors.c as a module in kernel
1502  Program sensors: it87 updates; adjust temp. precision for some chips
1503  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1504                          recognize unsupported SiS chips;
1505                          recognize AMD 766 and Serverworks CSB5.
15072.6.0 (20010612)
1508  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1509        If your make fails because it can't find <linux/i2c-proc.h>, you
1510        forgot this step!!!
1511  File doc/FAQ: Many, many updates and additions
1512  File doc/busses/i2c-sis5595: new
1513  File doc/busses/i2c-tsunami: new
1514  File doc/chips/it87: new
1515  File doc/chips/via686a: Claim support for 686b.
1516  File README.thinkpad: new
1517  File Adjust as99127f in5 (-12V) and temp2 calculations;
1518                        Add lm87, adm9240, ds1780, lm81 templates;
1519                        Enhance help comments in file;
1520                        Add Tyan S2510 dual-MTP008 example;
1521                        Make separate sis5595 section.
1522  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1523  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1524  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1525           Add support for maxilife-nba and amd1024;
1526           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1527  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1528  Chip Modules (all): Change from sensors_* to i2c_* globals
1529                      for new i2c-proc.[ch]
1530  Makefiles: enhance to support Alpha architecture
1531  Module adm1021: Fix lm84 and gl523sm support
1532  Module adm1024: new
1533  Module i2c-i801: Chip detection cleanup
1534  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1535  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1536  Module i2c-tsunami: New
1537  Module i2c-via: Ensure i2c bus is tristated correctly.
1538  Module it87: new driver for IT8705, IT8712, Sis950 chips
1539  Module lm78: Recognize chipid=0x20
1540  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1541  Module mtp008: Fix temp initializations;
1542                 Save BIOS pin configuration of temps and fans;
1543                 Fix sensor type reads/writes and fan min writes;
1544                 Fix spurious invalid sensor type messages
1545  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1546                  used for patched kernel now.
1547                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1548  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1549                  Allow force_addr=0xaddr
1550  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1551  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1552                  reading changes; Add messages for subclient
1553                  registration failure
1554  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1555  Program i2cset: new
1556  Program isadump: fix for Alpha arch. compiles
1557  Program Fix adm9240 typos; Add more chips to;
1558                      Remove ltc1710; Fix i2c_sis5595 typo;
1559                      Support kernel 2.4.5 makefile change;
1560                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1561  Program sens_update_rrd: new
1562  Program sensord: Add -d (debug) and -p (pid-file) options
1563  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1564                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1565                   Change mtp008 temps from max/min to limit/hyst;
1566                   Add maxilife-nba, adm1024, it87 support.
1567  Program sensors-detect: Recognize lm78 with chipid=0x20;
1568                          Recognize SMSC Victory66 South Bridge;
1569                          Add devfs /dev/i2c/x support;
1570                          Add adm1024, it87xx support; Add thinkpad warning.
1571  Program tellerstats: new
15732.5.5 (20010115)
1574  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1575        you have kernel 2.4.0-prerelease or greater.
1576  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1577  File doc/developers/proc: new
1578  File Add mtp008 entries, adm1025 entries
1579  Library: Add ds1621, mtp008 support
1580  Module adm1021: Add support for adm1021a / adm1023
1581  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1582  Module adm1025: Add support for remote temp; rename /proc entries to
1583                  in[0-5] and temp[1-2]; fix negative temp readings
1584  Module adm9240: Rename /proc entries to in[0-5]
1585  Module ddcmon: allow force and force_ddcmon parameters
1586  Module ds1621: new
1587  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1588  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1589  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1590  Module lm87: cleanup, update voltage calculations
1591  Module mtp008: new
1592  Module pcf8574: change update time to 5 seconds
1593  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1594  Module w83781d: fix beep setting via /proc
1595  Programs editticket, readticket: new
1596  Program only works with 2.2 and 2.4 kernels; 2.3 support removed
1597  Program more fixes; now adds many more modules
1598  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1599                   add adm1025 temp2; report temp limits correctly as
1600                   min/max or limit/hysteresis; print message if no
1601                   sensors are found. Removed false errors from lm87 reads.
1602  Program sensors-detect: Add ds1621, mtp008 detection;
1603                          add ServerWorks detection
16052.5.4 (20001012)
1606  Module i2c-viapro: Add support for Via 596B (0x3051)
1607  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1608  Program fixed infinite loop
1609  Program sensors-detect: Detect Via 596B (0x3051)
16112.5.3 (20001008)
1612  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1613  File useful_addresses.html: update
1614  Library: Add lm87 support
1615  Module pcf8574: new
1616  Module i2c-ali1535: new
1617  Module i2c-ali15x3: removed force #ifdef.
1618  Module i2c-i801: support Intel 82801BA (815E chipset)
1619  Module i2c-i801: add i2c block write support, fix smbus block bugs
1620                   (requires i2c 2.5.3 package)
1621  Module i2c-i810: support Intel 82815
1622  Module lm87: new
1623  Module sensors: Fix for kernel 2.4.0-test8
1624                  (remove copy_to_user_ret and put_user_ret)
1625  Module w83781d: limit fan divisors to 8 max. for as99127f
1626  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1627  Program i2cdump: Add smbus block read support
1628  Programs i2cdetect, i2cdump: Improve error reporting
1629  Program sensors: new switch -u (--unknown)
1630  Program sensors-detect: detect Intel 82801BA (815E chipset)
1631  Program sensors-detect: detect Intel 82815
1632  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1633  Program sensors-detect: detect National LM87
1634  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1635  Program sensors-detect: Improve error reporting
16372.5.2 (20000709)
1638  File Fix lm80 in8 calculation
1639  Module w83781d: W83783S no longer crashes on unloading
1640  Program sensors-detect: more robustness in case of unknown i2c adapters
1641  Program sensors-detect, libsensors: fix eeprom size reporting
1642  Program sensord: more flexibility, support for alarm scanning etc.
1643  Program sensors: support for ignore setting on sensor alarms.
1644  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
16462.5.1 (20000618)
1647  Library: Add adm1025 support
1648  Module adm1025: new
1649  Module ddcmon: Fixed bus scan which could hang SMBus
1650  Module i2c-keywest: new
1651  Module maxilife: Add support for Maxilife '99 (NBA)
1652  Module via686a: Enable sensors if not enabled by BIOS
1653  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1654  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1655  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1656  Module w83781d: Fis as99127f fan speed (was 66% too high)
1657  Module w83781d: Improve beep input checking
1658  Program i2cdump: Add Winbond-style bank selection
1659  Program isadump: Add Winbond-style bank selection
1660  Program sensors: Add adm1025 support.
1661  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1662  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1663  File Add Maxilife '99 entries
1664  File Remove some as99127f entries.
1665    Note: For as99127f, reinstall manually (make install
1666          won't reinstall it) or else 'sensors -s' will fail.
16682.5.0 (20000312)
1669  Dropped all kernel 2.0 and 2.1 compatibility
1670  Module i2c-i810: new
1671  Module ddcmon: new
1672  Module via686a: new
1673  Module i2c-amd756: fixed region request
1674  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1675  Module w83781d: Don't change pin settings at initialization;
1676                  also fix chip detection.
1677  Library: Support for ddcmon and via686a
1678  Program sensors-detect: Support for ddcmon and via686a
1679  Program sensors: Support for eeprom, ddcmon and via686a
16812.4.5 (20000116)
1682  Introduced DESTDIR installation prefix
1683  Module lm80: fixes, temperature now read and set correctly
1684  Module i2c-voodoo3: driver enhancements
1685  Module w83781d: fixes, AS99127 works much better now
1686  Library: New ignore keyword in config file
1687  Programs: Support for new ignore keyword
1688  Program sensors-detect: Support for MGA detections
16902.4.4 (19991201)
1691  Addition of the alpha release of AMD 756 SMBus host support.
1692  Many fixes and updates to the gl518sm driver
1693  Updates and fixes for device detection
16952.4.0 (19990920)
1696  Too much to list.
1697  i2c and smbus parts are split off to a separate i2c package.
1698  New drivers and other stuff.
17002.3.4 (19990616)
1701  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1702  All: Now compiles against kernel 2.0.x (again ;)
1703  Module gl518sm: some updates and refinements
17052.3.3 (19990603)
1706  All: Now compiles against kernel 2.3.x (x >= 1)
1707  Module i2c-voodoo3: Timing issue fixes
1708  Module bt869: Seems to be functional and relatively well tested
1709  Many modules were modified to be more compatible with the new
1710   Mutex structure in the new experimental kernels.
17122.3.2 (19990507)
1713  Module i2c-hydra: Now compiles on 2.0.x kernels
1714  Module i2c-lm75: Slightly better detection
1715  * New, but not compiled by default:
1716  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1717  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
17192.3.1 (19990501)
1720  All: Now compiles on PPC
1721  Module i2c-hydra: NEW
1722  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1723  Module w83781d: Removed deadlock (mutex was not initialized)
1724  Documentation: A few glitches removed
1725  Makefile: default module installation directory is now
1726            /lib/modules/current/extra/misc
1727  Program sensors-detect: PPC Hydra now detected
1728  Program sensors: Now prints complete GL518SM information
1729  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
17312.3.0 (19990422)
1732  All: Many, many changes and improvements
1733  All: Many small bugs and problems removed
1734  Modules: New insmod parameters
1735  Modules: Much improved chip detection
1736  Module maxilife: NEW
1737  Module adm1021: MAX1617A now also supported
1738  Module adm9240: DS1780 now also supported
1739  Module w83781d: W83782D and W83783S now also supported
1740  Program sensors-detect: NEW
1741  Library: All chips now supported
1742  Documentation: Very much improved
17442.2.2 (199903??)
1745  Just some minor updates and bug fixes.
17472.2.1 (19990218)
1748  All: Removed compile warnings
1749  Module i2c-dev: Small bug removed if DEBUG=1 was used
1750  Module sis5595: Now compiles for 2.0 kernels
1751  Module adm1021: Detection corrected
17532.2.0 (19990216)
1754  All: Set copyrights to include 1999
1755  All: Small bugfixes
1756  I2C: Upgraded to newest archive of Simon Vogl
1757  Module i2c-dev: NEW
1758  Module i2c-ali15x3: NEW
1759  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1760     directories, and somewhat improved
1761  Module sis5595: NEW
1762  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1763  Library: Support for new chip drivers, several small bugs fixed
1764  Library manual pages: NEW
1765  Program i2cdetect: Moved to detect directory
1766  Program NEW
1767  Program doc-features: NEW
1768  Program sensors: Added man-page
1769  Document BUGS: Added cdrom bug and kernel i2c conflict
17712.1.2 (19990116)
1772  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1773  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1774  Documentation in doc/kernel: NEW
17762.1.1 (19990107)
1777  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1778                     and older
1779  Module gl518sm.o: Miscelaneous bugs and problems solved
1780  Program isadump: NEW
17822.1.0 (19981230)
1783  Library: Completely NEW
1784  Program sensors: NEW
1785  Program grab_busses: NEW
1786  Program decode-dimms: More information
1787  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1788  Module w83781d.o: NEW
1789  Module lm80.o: NEW
1790  Module gl518sm.o: new procfile beep, several small updates
1791  Modules: Now use pin readings, no more scaling within the kernel (use the
1792           library instead)
17942.0.2 (19981214)
1795  Module eeprom.o: NEW
1796  Program decode-dimms: NEW
1797  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1798           2.1.58
1799  Modules: Somewhat less verbose on transfers
1800  Module lm78.o now recognizes and handles lm78-j and lm79
18022.0.1 (1998121?)
1803  Module gl518sm.o updates, to make it actually work
1804  Module lm75.o high/low-byte swapping write bug fixed
18062.0.0 (19981209)
1807  Initial release
Note: See TracBrowser for help on using the browser.