root/lm-sensors/trunk/CHANGES @ 5368

Revision 5368, 90.4 KB (checked in by khali, 6 years ago)

Add support for the VIA VX800/VX820 SMBus. Backported from Linux 2.6.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm_sensors CHANGES file
2-----------------------
3
4SVN-HEAD
5  File i2c-dev.h: Drop I2C_FUNC_SMBUS_*I2C_BLOCK_2 defines
6  Library: Avoid namespace pollution
7           Add support for the IT8720F chip
8           Support separate prefixes lm89, max6658, max6659, max6681,
9            max6646, max6647 and max6649
10  Module i2c-i801: Remove verbose debugging messages (2.6 backport)
11                   Properly report bus arbitration lost (2.6 backport)
12  Module i2c-piix4: Minor cleanups (2.6 backport)
13  Module i2c-viapro: Add VX800/VX820 support (2.6 backport)
14  Program pwmconfig: Fix MINSTOP and MINSTART test functions (#2340)
15                     Change default for MINTEMP from 0 to 20 degrees C
16  Program sensord: Add it8720 support
17                   Add lm89, max6658, max6659, max6681, max6646, max6647
18                    and max6649 support
19  Program sensors: Recognize it87 thermal sensor type 4 as thermistor
20                   Add it8720 support
21                   Add lm89, max6658, max6659, max6681, max6646, max6647
22                    and max6649 support
23  Program sensors-detect: Add VIA VT1212 support
24                          Add SMSC EMC2700LPC support
25                          Add ITE IT8720F support
26                          Add Texas Instruments TMP411 support
27                          Prevent misdetection of W83627DHG on I2C as LM78
28                          W83627DHG has no subclients
29                          Add VIA VX800/VX820 support
30                          Fix detection of Intel 5000 series FB-DIMM AMB
31
322.10.7 (20080701)
33  Library: Don't choke on unrecognized devices, part 2
34           Parse the configuration file in C locale (#2312)
35  Makefile: Fallback to simple depmod if System.map can't be found
36  Module asb100: Remove some dead code (2.6 backport)
37  Module i2c-amd756: Fix functionality flags (2.6 backport)
38  Module i2c-amd756-s4882: Fix an error path (2.6 backport)
39  Module i2c-i801: Drop broken I2C block read support
40                   Add ICH10 support
41  Module i2c-piix4: Minor cleanups (2.6 backport)
42  Module i2c-sis5595: Minor cleanups (2.6 backport)
43  Module lm75: Fix an incorrect comment (2.6 backport)
44  Module lm90: Fix LM86 detection (#2335)
45  Module w83l785ts: Don't ask user to report failures (2.6 backport)
46  Program fancontrol: Don't use named pipes when we don't need them (#2319)
47  Program sensord: Add lm90, adm1032, lm99, lm86, max6657, adt7461 support
48                   Fix adm1021, adm1023 support with 2.6 kernel (#2334)
49  Program sensors-detect: New device ID for the SMSC SCH5317
50                          Add SMSC SCH5127 detection
51                          Add National Semiconductor LM64 detection
52                          Add Asus F8000 detection
53                          Add Intel ICH10 (bus) detection
54                          Don't probe I2C addresses 0x40-0x47
55                          Fix the parsing of I2C addresses not to scan
56                          Detect and skip 1-register-only I2C devices
57                          Avoid SMBus word transactions where possible
58                          Add Dallas DS1631 detection
59                          Fix Andigilog aSC7621 support
60                          Fix Analog Devices ADT7461 support
61                          Add VIA C7 support
62                          Fix Winbond W83L786NR/NG/R/G support (#2336)
63
642.10.6 "Welcome Home Lina" (20080306)
65  Library: Fix fschrc and fschmd support
66           Fix sysfs presence detection
67           Don't choke on unrecognized devices, part 1 (#2087)
68           Fix lm93 vid2 access (#2295)
69           No in1 on w83783s
70           Support DOS-style configuration files again (#2284)
71  Makefile: Revert changeset 4738, fix bug #2187 differently
72  Module adm1026: Various cleanups
73  Module eeprom: Hide Sony Vaio serial numbers to regular users (2.6 backport)
74                 Drop useless debugging log messages
75                 Recognize VGN as a valid Sony Vaio name prefix (2.6 backport)
76  Module gl518sm: Fix fan speed reading (2.6 backport)
77  Module gl520sm: Fix fan speed reading (2.6 backport)
78  Module lm90: Use generic i2c reads during detection (2.6 backport)
79  Module w83627hf: Enable VBAT monitoring (#2282, 2.6 backport)
80  Program decode-dimms.pl: Fix DDR2 SDRAM module speed decoding
81                           Update manufacturer IDs.
82  Program decode-vaio.pl: Private data might not be readable by non-root users
83                          Print the asset tag
84                          Fix the timestamp decoding
85  Program i2cdump: Fix I2C block mode error code
86  Program fancontrol: Detect improperly formatted FCTEMPS value (#2293)
87  Program pwmconfig: Better diagnostics in pwmdisable
88                     Give the fans some time to spin up
89                     Really hide errors on sysfs writes
90                     Deal gracefully with read-only pwm_enable files
91                     Warn about outputs found in automatic mode
92                     Fix duplicate warning message when config file is broken
93  Program sensord: Add lm85 support
94  Program sensors: Hide spurious errors on missing f71872f voltage inputs
95                   Hide spurious errors on missing adm1026 inputs
96                   Fix W83783S prefix matching
97  Program sensors-detect: Add Texas Instruments TMP401 detection
98                          Mention the f75375s driver
99                          Add SMSC LPC47B367-NC detection (no sensors)
100                          Reduce w83781d/lm78 I2C address probing range
101                          Drop PCA9540 detection
102                          Add Intel Celeron 4xx and Penryn (CPU on 45nm)
103                           detection
104                          Improve sysconfig and modprobe.d integration
105                          Add SMSC SCH5514D-NS detection (no sensors)
106                          Lower the confidence of MAX6650/MAX6651
107                          Add Fintek F71858DG detection
108                          Add Fintek F81216D detection (no sensors)
109                          Add SMSC SCH5027D detection
110                          Do not access I/O ports on PPC
111                          Move south bridge sensor detection to the right
112                           section
113                          Run chip_special_cases() earlier
114  Program unhide_ICH_SMBus: Add support for the 82801AA (ICH)
115
1162.10.5 (20071024)
117  File i2c-dev.h: Rename I2C_FUNC_SMBUS_HWPEC_CALC to I2C_FUNC_SMBUS_PEC
118  File sensors.conf.eg: Add a thmc50 section
119  File useful_addresses.html: Moved to the wiki
120  Library: Fix a memory leak on error
121           Speed up sensors_get_ignored() a bit
122           Fix thmc50 support for Linux 2.6
123           Fix bmcsensors support for Linux 2.6
124           Fix lm93 VID support for Linux 2.6
125           Fix adm1024 support for Linux 2.6
126           Fix maxilife support for Linux 2.6
127           Fix magnitude of temperature offsets in Linux 2.6
128           Fix adm1026 critical temperature limits for Linux 2.6
129           Fix smsc47m192 temperature faults
130           Add sch311x support
131           Add support for adm1022 temp3
132  Makefile: Fix kernel version detection (#2187)
133  Man page sensord.8: Update
134  Module fscher: Add missing read of control register (2.6 backport)
135  Module i2c-i801: Add Tolapai support (2.6 backport)
136  Module i2c-nforce2: Declare PEC as supported (2.6 backport)
137  Module i2c-piix4: Add ATI SB700 and SB800 support (2.6 backport)
138  Module lm93: Fix an array overrun (2.6 backport)
139  Program sensord: Fix f71805f fans
140                   Synchronize the version with lm-sensors
141                   Fix a memory leak when daemonizing
142                   Fix memory leaks in command line parsing
143                   Add w83793 support
144                   Log the error code on failure
145                   Add lm87 support
146  Program sensors: Fix two memory leaks on error
147                   Add sch311x support
148                   Hide error on missing dme1737 fan and pwm
149                   Add thmc50/adm1022 support
150                   Hide error on missing adm1021 die code
151                   Handle gl518sm with no voltage input values
152  Program sensors-detect: Don't probe i2c-isa as a regular i2c bus
153                          Add Winbond W83L786NR/NG/R/G detection
154                          Add Winbond W83L771W/G detection
155                          Add Intel Tolapai SMBus detection
156                          Fix SMSC SCH311x detection
157                          Add AMD K10 CPU sensor detection
158                          Fix SMSC LPC47B357/M967 detection
159                          Select the right driver for FSC chips
160  Program sensors-detect-stat.pl: Handle alternative chip lists
161
162
1632.10.4 (20070716)
164  File doc/vid: Update the sysfs paths, update the chip lists
165  File i2c-dev.h: Support I2C block reads with specified length
166  File sensors.conf.eg: Add a dme1737 section
167  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
168  Library: Clean up pwm symbol names translation
169           Add dme1737 support
170           Add applesmc support
171           Add abituguru3 support
172           Add f71882fg support
173           Add w83627ehf support (for Linux 2.4)
174           Add support for the w83627ehf VID function
175           Add support for the w83627ehf thermal sensor types
176           Add support for it87 fan4 and fan5
177  Man page sensors.conf.5: Update the chip statement section
178  Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
179  Module lm85: Fix setting the fan speed min limit to 0
180               Add support for the EMC6D102 extra resolution bits
181  Module thmc50: Fix the i2c address range
182  Module w83627ehf: New (2.6 backport)
183  Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
184  Program i2cdump: Use the new I2C block read function
185  Program isadump: Detect when address bit 7 is a busy flag
186                   Fix Super-I/O exit sequence for Winbond/Fintek chips
187  Program fancontrol: Use let for arithmetic evaluation
188                      No longer need awk and grep
189                      Limit calls to external programs (Linux 2.6 only)
190                      Check for configuration file validity
191                      Support optional min and max PWM values
192                      Better integration with init scripts
193                      Use linear control instead of quadratic
194  Program pwmconfig: Use smaller steps for low PWM values
195                     Support optional min and max PWM values
196  Program mkpatch: Include w83627ehf
197  Program rrd: Support non-i2c devices (hwmon class)
198               Add missing shell declarations
199               Update URI
200  Program sensors: Drop ddcmon and eeprom support
201                   Add dme1737 support
202                   Add applesmc support
203                   Add max6680 support
204                   Add abituguru3 support
205                   Add f71882fg support
206                   Fix alignment of alarm for one-limit temperatures
207                   Add w83627ehf support (for Linux 2.4)
208                   Add support for the w83627ehf VID function
209                   Add support for the w83627ehf thermal sensor types
210                   Add support for it87 fan4 and fan5
211                   Display the extra resolution bits of the emc6d102
212  Program sensors-detect: Stop Super-I/O probe after first family success
213                          Fix SMSC DME1737 detection
214                          Add /usr/sbin to the PATH (#2199)
215                          Add ATI SB700 detection
216                          Add Maxim MAX6680/MAX6681 detection
217                          Add IT8726F detection
218                          Fix IPMI support for 2.6 kernels
219                          Add detection for non-standard SMSC Super-I/Os
220                          No longer depend on i2cdetect
221                          Add SMSC SCH5317 detection
222                          Drop detection of most non-sensors I2C chips
223                          Fix ADM1022 detection
224                          Add detection of many SMSC Super-I/O chips
225                          Add Fintek F71806FG and F71862FG detection
226
227
2282.10.3 (20070319)
229  Library: Do not skip i2c adapters with only a class device and no
230            physical device. This change is required to survive the
231            planned struct class_dev removal from future 2.6 kernels.
232           Add support for the SMSC LPC47M292 fans (prefix smsc47m2)
233           Recognize i2c-isa-based devices as such even after class_dev
234            is gone
235           Compile with -D_REENTRANT
236           Fix support of Linux 2.6's max6650 driver
237           Fix max1619 support
238  Man page i2cdetect.8: Scanning range can be restricted
239  Module bmcsensors: Fix debugging messages
240  Module i2c-ali1563: Improve the status messages (2.6 backport)
241                      Fix device initialization (2.6 backport)
242  Module i2c-amd8111: Cleanups (2.6 backport)
243                      Fix initialization race (2.6 backport)
244  Module i2c-nforce2: Drop unused reference to pci_dev (2.6 backport)
245  Module i2c-piix4: Add ATI SB600 support (2.6 backport)
246  Module i2c-viapro: Add CX700 support (2.6 backport)
247  Module smsc47m1: Add SMSC LPC47M292 support
248                   Get rid of a useless semaphore (2.6 backport)
249  Programs i2cdetect, i2cdump, isadump: Flush output in real time
250  Program i2cdump: Cleaner output in SMBus block read mode
251  Program fancontrol.pl: Fix pwmN_enable access (#2190)
252  Program sensors: Add smsc47m2 support (fans)
253                   Fix -A option (hide adapter name) on error
254  Program sensors-detect: Only probe relevant I2C addresses
255                          Drop ARP-capable device detection
256                          Add Maxim MAX6655/MAX6656 detection
257                           (Olexiy Avramchenko)
258                          Add Maxim MAX1668, MAX1805, MAX1989 detection
259                          Add VIA CX700 detection
260                          Drop legacy W83627HF ISA detection
261                          Don't bufferize stdout during probes
262                          Speed up the LM75 and LM77 detection
263                          Clean up the EEPROM detection
264                          Add Dallas DS75 detection
265                          Add SMSC LPC47M292 detection
266                          Add nVidia MCP61 and MCP65 detection
267                          Fix ADM1028 detection
268                          Add Nat. Semi. PC8347L Super-I/O detection
269                          Add SMSC SCH5504 Super-I/O detection (no sensors)
270                          Make the LM78 and W83781D detection safer
271
272
2732.10.2 (20070115)
274  RPM: Obsolete, removed
275  File doc/fan-divisors: Update
276  File sensors_vid.h: Trim VID values to correct number of bits (2.6 backport)
277  Library: Add support for the pc87247 driver (fans only)
278           Probe for busses before chips
279           Drop support for algorithm names
280           Add support for coretemp driver   
281           Major update/optimization of config-file scanner
282           Add config-file scanner regression tests
283           Add f71872f support
284           Add w83627dhg support (David Holl, #2157)
285           Get the i2c adapter names from classdev.name
286           Add adm1029 support (Corentin Labbe)
287  Man page i2cdetect.8: Describe the output convention
288  Man page sensors.1: Update (option -c) and clean up
289  Module bmcsensors: Fix several warnings
290                     Fix fragile structure initialization
291  Module i2c-i801: Add ICH9 support
292  Module p4b_smbus: Add support for the ICH5
293  Module f71805f: Fix the device address decoding (2.6 backport)
294  Module icspll: Delete. It was useless and dangerous.
295  Program decode-dimms.pl: Remove spaces at end of lines
296  Program eepromer: Fix loads of warnings
297  Program i2cdetect: Make the output clearer
298  Program py-smbus: New! Python i2c-dev bindings (prog/py-smbus)
299  Program unhide_ICH_SMBus: New! Unhides the ICH SMBus for 2.6 kernels
300                            without need of recompilation.
301  Programs dump/*: More robust handling of user inputs
302  Programs pwmconfig, fancontrol: Handle write errors for bash 3.1
303                                  Add support for non-i2c drivers
304  Program fancontrol.pl: Disable debugging by default
305                         Add support for non-i2c drivers
306                         More tolerant config file parsing
307  Program sensord: Add pc87247 support (fans only)
308                   Add vt1211 support (#2150)
309                   Add w83627dhg support (David Holl, #2157)
310                   Add w83627ehf voltage support (Dave Platt)
311                   Add k8temp support (Dave Platt)
312  Program sensors: Add pc87247 support (fans only)
313                   Hide error on missing f71805f fan
314                   Handle option -c more efficiently
315                   Drop option -a (show algorithm names)
316                   Add f71872f support
317                   Add w83627dhg support (David Holl, #2157)
318                   Add adm1029 support (Corentin Labbe)
319                   Hide error on missing w83793 temp (Gong Jun)
320  Program sensors-detect: Add SMSC DME1737 detection
321                          Add Fintek F71882FG and EPoX EP1308 detection
322                          Add Intel Core thermal sensor detection
323                          Preallocate memory for I2C_FUNCS ioctl (#2138)
324                          Prevent misdetection of MAX6633/MAX6634/MAX6635
325                          Add Intel ICH9 detection
326                          Add Maxim MAX6648/MAX6692 detection
327                          Improve ADM1029 detection
328                          Add Andigilog chips detection
329                          Add Intel AMB FB-DIMM thermal sensor detection
330                          Add ATI SB600 detection
331
332
3332.10.1 (20060924)
334  File doc/developers/checklist renamed to dev/developers/release_checklist
335          with clarifications and updates for new SVN server.
336  File README.package: Delete.
337  File doc/busses/i2c-piix4: Update (2.6 backport)
338  File doc/developers/sysfs-interface: Update
339  File etc/sensors.conf.eg: Add an smsc47m192 section
340                            Comment out all set statements
341                            Add an it8716 section
342                            Add a w83793 section
343                            Adjust the vt1211 section to match the new driver
344                             interface
345  Library: Fix device scan when no i2c support is present
346           Add support for W83627EHF voltage inputs and alarms
347           Add support for the smsc47m192 driver
348           Fix all memory leaks (yeah!)
349           Fix no sensors being reported as an error
350           Add support for the IT8716F and IT8718F chips
351           Add support for the W83793 chip (Yuan Mu)
352           Map the 2.6 adm1026's fan8 to fan0
353           Missing sysfs busses and classes are not errors
354           Change vt1211 temp3-7 magnitude from 1 to 3
355  Makefile: Don't grep autoconf.h on user-space targets
356            Fix depmod on non-running kernel version
357            Remove empty include directories on make user_uninstall
358  Module i2c-ali1535: Drop redundant semaphore (2.6 backport)
359  Module i2c-amd756-s4882: Improve static semaphore initialization
360                           (2.6 backport)
361  Module i2c-i801: Disable PEC mode after every transaction (2.6 backport)
362                   Add ICH8 support (2.6 backport)
363                   Fix block transaction poll loops (2.6 backport)
364                   Remove PCI function check (2.6 backport)
365                   Cleanups (2.6 backport)
366  Module i2c-nforce2: Add nForce4 MCP51, MCP55 support (2.6 backport)
367  Module i2c-piix4: Add ServerWorks HT-1000 support (2.6 backport)
368                    Add ATI IXP200, IXP300, IXP400 support (2.6 backport)
369                    Drop the fix_hstcfg parameter (2.6 backport)
370  Module i2c-viapro: Fix compilation with kernels < 2.4.21
371                     Add VT8237A and VT8251
372  Module lm83: Add LM82 support (2.6 backport)
373  Module vt1211: The VT1211 has no in6
374                 Rework the voltage and temperature conversions and the
375                  temperature input order to match the Linux 2.6 driver
376  Module w83781d: Use real-time alarm registers when possible (2.6 backport)
377                  Add specific alarm and beep defines for the W83791D
378  Module w83792d: Fix PWM range (2.6 backport)
379  Program decode-dimms.pl: Decode depending on the memory type
380                           Decode the manufacturing date to an ISO8601 date
381                           Add the memory size computation and provide brief
382                            timing characteritics for SDRAM/DDR/DDR2 memory
383                           Add memory size computation for Rambus memory
384                           Various output cleanups and fixes
385  Program decode-edid.pl: Add /usr/sbin or /usr/local/sbin to $PATH if needed
386  Program decode-vaio.pl: Detect and skip false positives
387  Program i2cdetect: Add a mode to print adapter functionalities
388  Program i2cdump: Restore bank after bank switching
389                   Add new mode W (read word on even register addresses)
390  Program mkpatch: Fix typo breaking f71805f
391                   Turn warnings on (-w), and fix them
392                   Print a usage message on missing command line parameters
393  Program pwmconfig: Use mktemp instead of tempfile
394  Program sensors: No error messages on missing w83792d fan4-7 (Yuan Mu)
395                   Add smsc47m192 support
396                   Add abituguru support (Hans de Goede)
397                   Fix memory leak when printing an unknown chip
398                   Add it8716 and it8718 support
399                   Make each it87 fan and fan div optional
400                   Print missing w83791d values
401                   Add w83793 support (Yuan Mu)
402                   The adt7463 may not have in4 (#2119)
403                   Hide more vt1211 missing input errors
404                   Clearer error messages when no sensors found
405  Program sensors-detect: Add ServerWorks HT-1000 SMBus detection
406                          Add ATI IXP200/300/400 SMBus detection
407                          Prevent warning on 64-bit PCI addresses
408                          Add Fintek F75363SG, F75111R/RG/N, F75121R,
409                           F75122R/RG, F75373S/SG, F75375S/SP, F75383S/M,
410                           F75384S/M, F75387SG/RG and F81218D detection
411                          Add Winbond W83793R/G and W83627DHG detection
412                          Handle the W83791D driver difference between kernels
413                          Add nForce4 MCP04, MCP51 and MCP55 detection
414                          Add AMD Geode devices detection
415                          Add ITE IT8716F and IT8718F detection
416                          Add NatSemi/Winbond PC87427 detection
417                          Get driver information for busy addresses from
418                           sysfs (2.6 only)
419                          Drop the ISA IT87xxF detection
420                          Check i2c adapter functionalities before probing
421                          Add Intel ICH8 SMBus detection
422                          Add AMD K8 thermal sensors detection
423                          Simplify detection of SiS5595, VIA686 and VT8231
424                          Add Analog Devices ADM1033, ADM1034, ADT7462,
425                           ADT7466, ADT7470, ADT7473 and ADT7475 detection
426                          Check for root user at startup
427                          Attempt to be slightly more user-friendly
428                          Add VT8237A and VT8251
429                          Remove detection of nVidia graphics adapters
430                          Use sysfs for PCI device enumeration
431                          Add generic PCI SMBus adapter detection
432                          Add generic Super-I/O logical device detection
433                          Add SMSC LPC47M172/182 detection
434
435
4362.10.0 (20060214)
437  File doc/lm_sensors-FAQ.texi: Remove version 1 specifics part
438  File doc/busses/i2c-viapro: Update (2.6 backport)
439  File doc/chips/via686a: Update (2.6 backport)
440  File doc/chips/w83627hf: W83627THF VID clarification (2.6 backport)
441  File etc/sensors.conf.eg: Do not set vrm by default
442  File i2c-dev.h: Fix union i2c_smbus_data definition
443                  Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
444                  Add missing parentheses around macros
445                  Drop I2C_FUNC_SMBUS_EMUL
446                  Drop I2C_FUNC_SMBUS_*_PEC
447                  Drop I2C_SMBUS_*_PEC
448  File sensors_vid.h: Drop default VRM
449  Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips
450           This is intentional.  Use decode-dimms.pl if you still
451           need your memory SPD data.
452  Library: Big update to use libsysfs.  More TODO though.
453           Fix bus matching code for Linux 2.6 (Karsten Petersen)
454           Add f71805f, w83687thf support
455           Add platform drivers support
456           Fix sysctl warnings on x86_64
457           Restore vt1211 temp1
458  Makefile: Compile user-space programs with -Wundef
459  Module i2c-i801: Simplify the hardware PEC code
460                   Always set PEC mode explicitly before each transaction
461  Module i2c-i810: Documentation update, PCI IDs cleanup
462  Module i2c-keywest: Remove bus probing code (2.6 backport)
463  Module i2c-nforce2: Remove dead code (2.6 backport)
464                      Add the ID of the nForce4 MCP-04 (2.6 backport)
465  Module i2c-via: Remove dead code
466  Module i2c-viapro: Remove dead code
467                     Support I2C block read (2.6 backport)
468                     Code cleanups (2.6 backport)
469                     Improve debug register dump (2.6 backport)
470  Modules i2c-ali1535, i2c-ali1563, i2c-ali15x3, i2c-amd756, i2c-amd8111,
471          i2c-i801, i2c-nforce2, i2c-piix4, i2c-sis5595, i2c-sis630,
472          i2c-sis645: Use pci_driver name to request I/O region; do
473                      not initialize i2c_adapter name to "unset" (2.6
474                      backport)
475  Modules i2c-amd8111, i2c-i801, i2c-nforce2: Drop software PEC code
476                                              (2.6 backport)
477  Module adm9240: Cleanups (2.6 backport)
478  Module f71805f: New, supports the Fintek F71805F/FG Super-I/O
479  Module it87: Minor cleanups
480               Fix fan3_div setting bug (Anton V. Staaf)
481  Module lm90: Support the ADM1032-2 and ADT7461-2 (2.6 backport)
482               Separate the register read function
483               Add PEC support for the ADM1032
484  Module via686a: Cleanups
485  Module w83627hf: Drop useless initialization step (2.6 backport)
486                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
487                   Fix alarms (Yuan Mu)
488                   Preserve fan min on fan div change (Yuan Mu)
489                   Properly handle W83627THF without VID (Yuan Mu)
490                   Fix in0 limit settings in "VRM9" mode (Yuan Mu)
491                   Add W83687THF support
492  Module w83781d: Drop W83697HF support (Grant Coady)
493  Module w83792d: Bug fixes and code cleanups (Yuan Mu, 2.6 backport)
494                  Fix fan control mode (PWM/DC) reporting
495                  Fix fan div auto-adjust (Yuan Mu)
496                  Fix the subclient handling
497  Module w83l785ts: Minor cleanup (2.6 backport)
498  Module vt1211: Restore temp1
499  Modules vt1211, vt8231: Change default VRM to 9.1
500  Program decode-dimms.pl: Add lookup tables for manufacturer names
501                           Fix rounding error in PCxxxx speed computation
502                           Improve text output
503                           Improve speed under Linux 2.6
504                           Verify checksum before decoding anything
505                           Improve manufacturing location decoding
506                           Improve memory type detection
507                           Improve part number decoding
508  Program i2cdump: Drop now useless #ifdef tests
509                   Fix capability check for continuous byte mode
510  Program i2cget: New
511  Program i2cset: Add PEC support
512                  Fix argc check
513  Programs i2cdetect, i2cdump, i2cset: Stop printing the algorithm name
514                                       Print the correct bus type if bus
515                                       functionality can be queried
516  Program isadump: Display the real addresses in flat mode
517  Program mkdev.sh: Silently skip already existing nodes
518  Program mkpatch: Include f71805f
519  Program sensord: Do not log algorithm names
520                   Drop EEPROM support (Aurelien Jarno)
521                   Add W83627EHF, F71805F/FG support
522                   Fix PC87365/PC87366 alarms
523  Program sensors: Drop free_the_label
524                   Fix compilation with uclibc (no iconv)
525                   Add f71805f, w83687thf support
526  Program sensors-detect: Drop algorithm names
527                          Do not rely on i2cdetect -l printing algo names
528                          Simplify adapter name matching mechanism
529                          New address for ADM1032, ADT7461
530                          Improve ADT7467, ADT7468 support
531                          Fix MAX6659 reported driver
532                          Add Fintek F71805F detection
533                          Add Analog Devices ADT7476 detection
534                          Add Intel 82845G detection
535                          Add IT8201R/IT8203R/IT8206R/IT8266R detection
536                          Fix udev detection in some corner case
537                          Improve DS1621 detection
538                          Always prefer ISA access over SMBus access
539
540
5412.9.2 (20050906)
542  File doc/chips/*: Big update (2.6 backport)
543  Library: Drop ds1780-specific code (now use adm9240)
544           Fix memory leak in sensors_get_label()
545           Support /sys/class/hwmon (Linux 2.6.14+)
546           Limit stack usage in sensors_read_proc_chips()
547  Makefile: Detect 2.6+ kernels and check targets
548  Man page isaset.8: Fix typos
549  Module adm1031: Fix broken kfree() calls
550  Module i2c-ali1563: New (2.6 backport by Winbond)
551  Modules i2c-ipmb, i2c-ipmi: Support ipmi_request() additional argument
552  Modules it87, pc87360, sis5595, smsc47m1, vt1211, vt8231,
553          w83627hf.c: Tag find function __init
554  Module lm93: Fix memory leak
555  Module smsc47m1: Fix PWM enable polarity on read
556  Modules w83627hf, w83781d: Allow setting fan divisor to 128
557  Program decode-dimms.pl: Support Linux 2.6 (Burkart Lingner)
558                           Added DDR/DDR2 frequency reporting in convenient
559                           form of DDRxxx PCyyyy
560  Program i2cdump: Properly handle short i2c block reads
561  Program fancontrol.pl: Fix compile errors
562  Program mkpatch: Include i2c-ali1563
563                   Include w83792d
564  Program pwmconfig: Fix unsafe temporary file use
565  Program rrd: Support 2.6 kernels
566  Program sensord: Add support for w83637hf
567                   Support pc87360 (Henrik Brix Andersen)
568  Program sensors: Support the VAIO "VGN" prefix for eeprom
569  Program sensors-detect: Add SMSC LPC47M15x/LPC47M192 SMBus detection
570                          Advertise the w83792d driver
571                          Improve IT8705F and IT8712F detection
572                          Merge LM82 and LM83 detection
573                          Add W83687THF detection
574
575
5762.9.1 (20050412)
577  File doc/busses/i2c-nforce2: Update
578  File doc/chips/it87: Update
579  File doc/chips/lm90: Update for adt7461
580  File doc/chips/mic74: New
581  File etc/sensors.conf.eg: New sections for lm92 and w83792d
582  Library: Add support for 2.6 fscpos driver (Stefan Ott)
583           Fix sis5595 in4 (Aurelien Jarno)
584           Add support for 2.6 gl520sm driver (Maarten Deprez)
585           Add support for 2.6 bmcsensors driver (Yani Ioannou)
586           Add support for w83792d (Chunhao Huang/Winbond)
587           Add support for 2.6 adt7461 (James Chapman)
588           Add support for 2.6 lm92
589           Add support for 2.6 vt1211
590           Add preliminary support for 2.6 w83627ehf
591  Makefile: Support mips, sparc32 and sparc64 (Aurelien Jarno)
592            Use -fno-strict-aliasing on all architectures
593  Man pages pwmconfig, fancontrol: New (Aurelien Jarno)
594  Module bmcsensors: Fix compile error
595                     Support IPMI V0.9 (Yani Ioannou/Vladislav Bogdanov)
596  Module ds1621: Fix detection (Aurelien Jarno)
597  Module eeprom: Discard SPD-centric checksum module parameter
598                 Cleanup detection function (backport from Linux 2.6)
599  Module i2c-ali1535: Add delay loops for reliability (Ubel Walter)
600  Module i2c-i801: Temporarily disable broken I2C block read
601  Module i2c-ipmi: Fix bogus return in a middle of a function (Sergio
602                   Gelato)
603  Module i2c-nforce2: Add nForce4 support (Hans-Frieder Vogt)
604  Module i2c-viapro: Prevent repeated resets
605  Module it87: Improve Super-I/O detection
606               Limit I2C address range
607               Support VID on the IT8712F
608  Module lm75: Only initialize CMP/INT bit
609  Module lm78: Fix bug with setting negative temperature limits
610  Module lm85: Properly differentiate between ADM1027 and ADT7463
611               Add EMC6D102 support
612  Module lm90: Fix MAX6657, MAX6658 and MAX6659 detection
613               Add limited ADT7461 support
614  Module lm93: Fix IN10 (+5V) scaling
615  Module mic74: New
616  Module w83627hf: Support secondary Super-I/O address
617                   Enable temp2 and temp3 if they are disabled
618  Module w83781d: Revert AS99127F temp2 and temp3 computation change
619                  Skip final initialization step for AS99127F chips
620  Module w83792d: New (Chunhao Huang/Winbond)
621  Program ddcmon: New; user-space replacement for the ddcmon driver
622  Program eeprog: Fix missing first char in ascii mode (J. A. McMahan Jr.)
623  Program isadump: Handle Super-I/O keys
624  Program lm_sensors.init: Cleanups (Axel Thimm)
625  Program mkdev.sh: Add basic command-line interface
626  Program mkpatch: Add adm1031, fscher, lm63, lm93 and max1619
627  Program pwmconfig: Secure the creation of temporary files (Aurelien Jarno)
628                     Don't complain about read-only enable files (lm85)
629                     Fix handling of alternate config file name
630  Program sensord: Fix erroneous error message (Aurelien Jarno)
631                   Support sis5595 in4 (Aurelien Jarno)
632                   Support w83627thf
633                   Support the separate it8712 prefix (Aurelien Jarno)
634  Program sensors: Display sis5595 in4 (Aurelien Jarno)
635                   No errors on missing pc87360 fans
636                   Add gl520sm support (Maarten Deprez)
637                   Improve vt1211 error/ignore handling (Michael Carland)
638                   Support w83792d, w83627ehf
639  Program sensors-detect: Fix MAX6657, MAX6658 and MAX6659 detection
640                          Improve IT8705F and IT8712F detection
641                          Improve udev detection
642                          Fix DS1621 detection
643                          Add W83627EHF detection
644                          Add ATI SMBus detection
645                          Add VT1211 alias detection
646                          Warn if chip modules not found
647                          Add i2c-ipmi to list if bmcsensors is on it
648                          Add PC87591 detection
649                          Search for correct udev db file name
650                          Add nForce3 250Gb and nForce4 detection
651
652
6532.9.0 (20041228)
654  NOTE: Requires i2c-2.9.0 or newer!
655  File README.thinkpad: Update
656  File doc/chips/it87: Cleanups
657  File doc/chips/lm63: New
658  File etc/sensors.conf.eg: Set via686a voltage limits
659  File kernel/chips/Module.mk: Resync module list with mkpatch
660  File kernel/include/sensors_compat.h: Define __devexit_p if missing
661                                        (kernels 2.4.16 and older)
662  Modules (all bus drivers): Remove owner from i2c_adapter; restore inc_use
663                             and dec_use removed in release 2.8.0
664  Modules (all chip drivers): Remove owner from i2c_driver; pass
665                              controlling_mod to i2c_register_entry() again
666  Module bmcsensors: Support function 1/x
667  Module i2c-amd756: Display the real bus name
668  Module i2c-amd756-s4882: New; SMBus multiplexing on the Tyan S4882
669  Module i2c-i801: Support i2c block read (ICH5 and higher)
670                   Add PEC support for ICH6
671                   Add support for ICH7
672  Module i2c-ipmb: Remove from build since it doesn't work
673  Module i2c-nforce2: Support the nForce3 (Pro150 and 250Gb)
674  Module icspll: Fix compilation
675  Module lm63: New driver for the National Semiconductor LM63
676  Module lm83: Use signed types for temperatures
677               Check limits on register writes
678  Module lm87: Round voltages properly
679               Retry on read errors (David Knierim)
680               Less agressive init (no reset)
681  Module lm90: Use signed types for temperatures
682               Check limits on register writes
683  Module lm93: Added module parameter for VID pin input thresholds.
684               Fix typo in dynamic VID alarms
685               Adds a couple log messages for failed transactions (David
686               Knierim)
687               Fix compilation breaking C99-ism (Axel Thimm)
688               Fix block read retries
689  Module pc87360: Support secondary Super-I/O address
690  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
691  Library: Add lm63 support
692           Add lpc47b397 support
693  Programs *.init: Rename lockfile to match file name
694  Programs i2cset, isaset: Written byte/word can be masked
695  Program decode-vaio.pl: Find eeproms on non-0 i2c bus too
696  Program mkpatch: Include i2c-amd756-s4882
697  Program pwmconfig: Handle new (well, back to old) pwm files names for
698                     Linux 2.6.10 and up
699  Program sensord: Do not scale load average (Aurelien Jarno)
700  Program sensors: Add lm63, lpc47b397 support
701                   Support DDR2 memory module EEPROMs (Rudolf Marek)
702                   Support only one location for the default configuration file
703                   Display the default configuration file location in --help
704                   Simplify the configuration file opening code
705  Program sensors-detect: Improve LM63 detection
706                          Discard IBM Thinkpad detection code
707                          Add PCA9556, LPC47B397, ICH7 detection
708                          Fix W83792D detection, add W83791SD detection
709
710
7112.8.8 (20041007)
712  File doc/donations: Update
713  File doc/lm_sensors-FAQ.texi: Add 4.6.1
714                                Update 4.7
715  File doc/chips/gl518sm: Update "iterate" info
716  File doc/chips/it87: Discard outdated module parameters
717  File doc/chips/lm75: LM77 is not supported
718  File doc/chips/lm90: LM86, MAX6657 and MAX6658 are supported
719  File doc/chips/lm93: New
720  File doc/chips/w83l785ts: Improvements
721  File etc/sensors.conf.eg: Fix it87 lines order
722                            Update lm87 section
723  File kernel/include/sensors_vid.h: Support VRM 10.0
724  Library: Support 2.6 adm1025
725           Preliminary support for 2.6 lm87
726           Support 2.6 adm9240
727           Allow an alternative sysfs file name for chip features (2.6)
728           Fix lm83 critical limits (2.6)
729           Add lm93 support
730           Prevent some procfs errors from being silently ignored
731  Makefiles: Implement user_uninstall (Rudolf Marek)
732             Spoof LOGNAME and HOSTNAME when making html man pages
733  Module adm1025: Refine detection
734                  Update limit registers again (revert of 2.8.1)
735                  Init high limits if they read 0
736                  Fix conversions
737  Module lm75: Refine detection
738  Module lm78: Fix init
739  Module lm83: Default to kind lm83 if forced.
740               Fix temperature macros.
741  Module lm90: Add LM86, MAX6657 and MAX6658 support
742  Module lm93: New
743  Module mtp008: Fix the setting of limits on temp2
744  Module pca9540: Refine detection
745  Module pc87360: Change voltage/thermistor magnitude from 2 to 3
746                  Support VID
747                  Fix fan_div file when fan count is less than 3
748                  Additional init and debug
749  Module smsc47m1: Fix pwm_enable being inverted
750  Module w83627hf: Add alternate VCORE/in0 calculation method
751                   Remove reset of chip by driver on initialization
752  Module w83781d: Fix default VRM for w83791d
753  Module w83l785ts: Implement read error handling (backport from 2.6)
754  Programs i2cset, i2cdump, i2cdetect, isaset, isadump:
755                    Wait for user input to continue (as opposed to 5 sec
756                    delay), can be skipped with -y
757                    Various cleanups and code refactoring
758                    Update manual pages
759  Program fancontrol.init: New (Dean Takemori)
760  Program fancontrol.pl: Restore fans on many kinds of errors/interrupts
761  Program lm_sensors.init: Support 2.6 kernels and sensors in /usr/bin
762                           (Giuseppe Della Bianca)
763  Program mkdev.sh: Detect devfs and refuse to run
764                    Use mknod's mode instead of chmod
765  Program mkpatch: Include xeontemp and pc87360
766  Program sensors: Rework adm1025 support
767                   Display pc87365/pc87366 VID
768                   Improve smsc47m1 support
769                   Hide 2.6 adm1027 alarm_mask being missing
770                   Print VRM version for all supported chips
771  Program sensors-detect: Support LM93, LM77, LM63
772                          Support PC8739x Super-I/O family (no sensors)
773                          Fix PCA9540 support
774                          Refine ADM1025/ADM1025A detection
775                          Refine LM75 detection
776                          Ignore missing /proc/modules (Andras Bali)
777                          Script-wide Perl cleanups
778                          Support udev
779                          Support W83792D, LM96000
780
781
7822.8.7 (20040611)
783  File README.thinkpad: Update 24RF08 status
784  File doc/fan-divisors: More info on accuracy
785  File doc/lm_sensors-FAQ.texi: Update 4.27
786  File doc/chips/adm1031: New
787  File doc/chips/max1619: New
788  File doc/chips/pc87360-fan: Renamed to pc87360
789  File doc/chips/pc87360: Big update
790  File doc/chips/w83781d: Update AS99127F documentation
791  File etc/sensors.conf.eg: Add comments about BP6 voltages
792                            Add comment on Asus A7V8X-X VCore
793                            Misc fixes to lm80 section
794                            Update via686a section
795                            New lm99 section
796                            Add section for LM85-like chips
797                            Preliminary pc87366 section
798                            Add comment on GL520SM application modes
799                            Document beep_enable (Aurelien Jarno)
800                            Preliminary max1619 section
801                            Preliminary adm1030 and adm1031 sections
802  Library: Fix 2.6 VRM
803           Fix 2.6 hyst temp for 2.6 (lm75, lm78 and gl518sm)
804           Fully support the PC87360 family
805           Support the lm99
806           Add version and date strings
807           Support 2.6 max1619
808  Makefile: Do not run depmod on staged installs (Peter Breitenlohner)
809  Man page i2cdetect.8: document new command line flags
810  Man page i2cdump.8: More details on how i2cdump can write to a chip
811  Modules (all chip drivers): Rework memory allocation scheme.
812  Module adm1031: New (Alexandre d'Alton)
813  Module bmcsensors: Fix oops by creating thread for initialization
814  Modules dmi_scan, i2c-piix4: Move IBM detection into dmi_scan
815  Modules w83781d.c, smartbatt.c, lm75.c, gl520sm.c, gl518sm.c, ds1621.c,
816          asb100.c, lm92.c: Use swab16
817  Modules eeprom, ddcmon: Unconditional prevention of 24RF08 corruption
818  Module gl520sm: Less agressive initialization process
819                  Fix temp1 limits being unsettable in application
820                  Ensure that temp2 and in4 are not used at the same time
821  Module i2c-i801: Support 6300ESB and ICH6
822  Module i2c-piix4: Don't blacklist IBM with Serverworks chip
823  Module i2c-sis645: Add support for SiS655
824  Module it87: Discard non-standard Super-I/O exit sequence (Bjorn Mork)
825  Module lm90: Support LM99 and LM89
826  Module lm92: Support MAX6633, MAX6634, MAX6635 and LM76
827               Get rid of useless i2c_probe call
828  Module max1619: New (Alexey Fisher)
829  Module p4b_smbus: Add support for mobile versions of the 82801
830                    (Axel Thimm)
831  Module pc87360-fan: Renamed to pc87360
832  Module pc87360: Also support PC87365 and PC87366
833                  Add write support
834                  Correctly set the chip name depending on the type
835                  Add voltage and temperature support
836                  Fix fan speed computation
837                  Retrieve fans configuration from Super-I/O space
838                  Export pwm_enable (read-only)
839                  Honor pwm invert bits
840                  Clear fan alarms after we read them
841                  Do not read fan data when monitoring is disabled
842                  Do not include SENSORS_INSMOD stuff
843                  New module parameter: init
844                  Fan clock dividers change automatically
845                  Add thermistor dupport
846  Module smsc47m1: Lock on reads and writes
847                   Various PWM fixes
848  Module thmc50: Fix address range
849  Module via686a: Fix voltage roundings
850                  Simplify temperature conversions
851  Module w83781d: Drop PWM support for as99127f
852                  Invert AS99127F beep bits in driver rather than user-space
853  Programs pwmconfig, fancontrol: Switch to new sysfs naming scheme
854  Program fancontrol: restore fans on TERM and KILL (Stephen Kitt)
855  Program fancontrol.pl: New
856  Program i2cdetect: Adapt probing method to address
857                     Add -q and -r flags to force probing methods
858                     Allow probing range selection
859  Program isadump: Major improvements
860  Program isaset: New
861  Program mkpatch: Patch dmi_scan.c in kernel instead of adding our own
862                   module
863                   Include i2c-nforce2
864  Program sensord: New --rrd-no-average parameter
865                   Synchronize time slots with rrd
866                   Fix W83781D temp3 alarm (Aurelien Jarno)
867                   Add ASB100 support (Andrew May)
868  Program sensors: Fully support the PC87360 family
869                   Fix lm80 temperature alarms
870                   Support the lm99
871                   Do not invert AS99127F beep bits anymore
872                   Fix W83781D temp3 alarm (Aurelien Jarno)
873                   Print library version string
874  Program sensors-detect: Rework Super I/O detection
875                          Support SiS655/SiS96x
876                          Support ADT7461 and ADT7467
877                          Better support for ADM1027, ADT7460 and ADT7463
878                          Explicitly support ADM1028
879                          Scan all logical devices of PC87365 and PC87366
880                          Detect LM92, LM76, MAX6633, MAX6634, MAX6635
881                          Detect eeproms with software write protect (not
882                          enabled by default)
883                          Support ALi 1563 (2.6 only)
884                          Drop LTC1710 support
885                          Use byte reads for probing on ranges 0x30-0x37 and
886                          0x50-0x5F
887                          Improve LM89 and LM99 support
888                          Support GeForce FX 5900 video cards
889                          Fix devfs misdetection (Aurelien Jarno)
890                          Detect 6300ESB, ICH6
891                          Fix double detection of ISA chips
892                          Support MAX1619
893                          Support PC87373 Super-I/O
894                          Fix unknown adapters appearing multiple times
895                          Refine MAX6650/MAX6651 detection
896
897
8982.8.6 (20040405)
899  File README.thinkpad: Update status
900  File doc/chips/pca9540: New
901  File doc/chips/pc87360-fan: New
902  File etc/sensors.conf.eg: Update pcf8591 default configuration
903  Library: Switch to new sysfs naming standard
904           Fix gcc 3.3 warnings (Philipp Thomas)
905           Support 2.6 ds1621 and pcf8591
906           Change pcf8591 magnitudes
907           Support pc87360-fan
908  Makefile: Install shared library 755
909  Man pages i2cdump.8, i2cset.8, isadump.8: New (Debian team)
910  Man pages i2cdetect.8, sensors-detect.8: New (Debian team)
911  Modules ds1621, pcf8591: Check for capabilities before using them
912                           (Aurelien Jarno)
913  Modules pcf8574, pcf8591: Cleanups
914  Modules ddcmon, eeprom: Fix bogus init (Ralf Roesch)
915  Module adm1021: Better detection and initialization
916  Module pca9540: New driver for the Philips PCA9540
917  Module pc87360-fan: New driver for the National Semiconductor PC87360,
918                      PC87363 and PC87364 Super I/O chips
919  Module smsc47m1: Support the LPC47B27x
920  Programs i2cdetect, i2cdump, i2cset: Fix incorrect bus names if possible
921  Program i2cdetect: Skip special addresses by default
922  Program sensord: Prevent null pointer dereference (Tim Toohey)
923  Program sensors: Print the degree symbol in the terminal's current locale
924                   (Aurelien Jarno)
925                   Update pcf8591 print to support 2.6 driver
926                   Support pc87360-fan
927  Program sensors-detect: Support Maxim MAX6900, ALi M5879, Philips PCA9540
928                          Improved SiS chips support
929                          Add a white list of IBM systems
930                          Drop support of undetectable adapters
931                          Fix smart battery detection
932                          Add smart battery charger and manager detection
933                          Rework adm1021 and clones detection
934                          The PC87360, PC87363 and PC87364 Super I/O chips
935                          now have a (preliminary) driver
936                          Rework Super I/O detection
937                          Better support of devfs
938  Program sensors-detect-stat.pl: New
939
940
9412.8.5 (20040305)
942  File doc/chips/SUMMARY: Update
943  File etc/sensors.conf.eg: Epox 8K3A tweaks. (Kronos)
944  Makefiles hotplug and rrd: Remove -o and -g arguments to install
945  Module bmcsensors: Increase max SDRs to 100
946  Module fscher: Rename fanN_min to pwmN (Reinhard Nissl)
947  Module i2c-amd756: Don't register driver to avoid driver conflicts.
948                     (Daniel Rune Jensen)
949  Module it87: Better temperature sensor types handling (Takeru Komoriya)
950               Fix reset=1 (Takeru Komoriya)
951  Module lm80: Code cleanups
952  Module vt1211: Fix bitmask in uch_config read and write; remove in6 and temp1
953  Module vt8231: Fix bitmask in uch_config read and write; remove in6 and temp1
954  Module w83627hf: Add w83637hf support
955                   Fix exported name
956                   Fix PWM in w83627thf
957                   Preserve other bits when forcing temp2/3 to comparator mode
958  Module w83781d: Preserve other bits when forcing temp2/3 to comparator mode
959                  Remove asb100 support
960  Modules asb100, fscher, lm90, max6650, w83l785ts, xeontemp:
961          Define driver ID if i2c-id.h doesn't have it yet.
962  Modules i2c-ali1535, i2c-hydra, i2c-i801, i2c-sis5595:
963          Backport oops fix from Linux 2.6.
964  Modules (all chips): Get rid of useless headers
965  Program decode-edid.pl: Add sysfs support
966  Program sensors: Add w83637hf support
967                   Add support for Shuttle Ethernet EEPROMs
968                   Drop 2.6 subclient detection
969  Program sensors-detect: Add heuristics to the LM80 detection function
970                          Add support for W83L785R, improve W83L784R/AR
971                          Add GeForce FX 5600 as supported by rivatv
972                          More Super IO chips, better handling
973  Library: Update to match renames in fscher
974           Reverse temporary changes to w83l785ts mappings
975           Fix vt1211 and vt8231 uch_config not being writable
976           Add 2.6 lm80 support
977           Add w83637hf support
978           Remove in6 and temp1 from vt1211 and vt8231
979           Add support for Shuttle Ethernet EEPROMs
980           Remove unused as99127f features
981
982
9832.8.4 (20040207)
984  File doc/lm_sensors-FAQ.texi: Update 4.20.
985  File doc/chips/it87: Change hyst to low
986  File doc/chips/w83l785ts: New
987  File etc/sensors.conf.eg: Change it87 hyst to low
988                            Fix w83697hf supposed to have temp3
989                            Limits initialization for adm1025/ne1619
990                            Handle fscher voltage conversions
991                            Add Tyan Trinity S2495 KT400 setup (Eric
992                              Schumann)
993                            Fix fscher fan labels (Reinhard Nissl)
994  Library: Better 2.6 eeprom support
995           Change it87 hyst to low
996           Add 2.6 gl518sm, fscher support
997           Fix 2.6 negative voltages handling
998           Temporary fix to w83l785ts mappings
999  Module adm1025: Separate prefix for NE1619
1000  Module adm1026: Remove use of temporary ID
1001                  Define addresses as a range
1002  Module bmcsensors: Fix reservations
1003  Module fscher: Externalize voltage conversions
1004  Module eeprom: Remove memtype
1005  Module i2c-piix4: Fix resource release error
1006                    Various cleanups
1007  Program decode-vaio.pl: Add sysfs support
1008  Program mkpatch: Add max6650, lm83, lm90, asb100 and w83l785ts
1009                   Drop linux 2.2 support
1010                   Add w83627hf
1011  Program sensors: Do not show algorithm by default
1012                   Cleanup temperature unit display code
1013                   Cleanup label spacing code
1014                   Fix output to UTF-8 terms (Marcel Sebek)
1015                   Simplify gl518sm print
1016                   Do not ignore errors in FSC chips prints
1017                   Fix w83l785ts print
1018                   Cleanup FSC chips prints
1019  Program sensors-detect: Fix PATH issues
1020                          Correctly point to the fscher driver
1021
1022
10232.8.3 (20040115)
1024  File lm_sensors.spec: Update
1025  Library: Add 2.6 eeprom, lm90 support
1026           Fix 2.6 temp_hystX for 2.6.1-rc1 and later
1027  Makefile: Update Alpha CMODFLAGS (Daniel Nilsson)
1028  Makefiles: Remove -o and -g arguments to install; add DESTDIR where missing
1029  Module i2c-amd756: Fix byte writes
1030  Module i2c-tsunami: Cleanups (Daniel Nilsson)
1031  Module it87: Fix sg_tlx writes; fix sensor type reporting;
1032               add 8712 Super I/O detection;
1033               remove initialization of temp_type and fan_ctl;
1034               remove init and temp_type module parameters
1035  Module lm90: Handle hysteresis differently
1036  Module smartbatt: Fix detection, magnitudes, temp
1037  Module w83781d: Fix negative voltages
1038  Module w83l785ts: New
1039  Program eeprog: Make 8 bit mode the default
1040  Program fancontrol: Improvements, fixes, support 2.6 kernels
1041  Program mkpatch: Add lm75.h
1042  Program pwmconfig: Improvements, fixes, support 2.6 kernels
1043  Program sensors: Add ASB100 support
1044  Program sensors-detect: Add 8712 Super I/O detection;
1045                          add W83L785TS detection
1046
1047
10482.8.2 (20031211)
1049  IMPORTANT: Limit initialization removed from all chip drivers!
1050             If you didn't run 'sensors -s' in the past you may need to now!
1051  File sensors.conf.eg: Change lm75 scaling back to 1;
1052                        Add example for asb100
1053  Library: Fix bmcsensors scaling, increase number of sensors;
1054           Add w83627thf support; Advance version to 3.0.0;
1055           Add hermes, ADM1032, ASB100 support;
1056           Add it87 sensor type support;
1057           Add sysfs support for kernel 2.6;
1058           Fix memory leaks
1059  Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
1060             Fail if no kernel .config file exists;
1061             Don't build module dependencies for user and user_install
1062  Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
1063          it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
1064          smsc47m1, thmc50, via686a, w83627hf, w83781d:
1065          Remove initialization of limits by driver.
1066  Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding
1067  Modules (chip): Init cleanups
1068  Module asb100: New
1069  Module bmcsensors: Fix voltage scaling, voltage and fan limits
1070  Modules ddcmon, eeprom: Add failure printks
1071  Module fscher: New (Fujitsu-Siemens Hermes driver)
1072  Module i2c-amd756: Fix AMD8111 support
1073  Module i2c-amd8111: Fix byte writes
1074  Module i2c-nforce2: Fix byte writes
1075  Module i2c-piix4: Add support for CSB6; add fix_hstcfg option
1076  Module i2c-sis630: Sync with 2.6.0-X driver version
1077  Module i2c-viapro: Add support for Via 8237
1078  Module it87: Add pwm and "smart guardian" support;
1079               add it87 sensor type support
1080  Module lm75: Fix negative voltages
1081  Module lm90: Add ADM1032 support
1082  Module w83781d: Fix 791d and 627hf detection
1083  Module w83627hf: Add VID support
1084  Program dmidecode: Remove (sensors-detect doesn't need it anymore)
1085  Program eeprog: New
1086  Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
1087                                       support sysfs for i2c bus search
1088  Program i2cdetect: Add -l option to list busses
1089  Program i2cdump: Add 'c' mode for consective address reads
1090  Program mkpatch: Cleanups
1091  Program pwmconfig: Handle multiple fans controlled by a single pwm
1092  Program sensord: Remove ddcmon support
1093  Program sensors: Add ADM1032 support; add messages for sysfs
1094  Program sensors-detect: Prefer Super I/O drivers;
1095                          Fix W83627HF and W83791D detection; detect CSB6;
1096                          Detect ADM1029, ADM1030, ADM1031;
1097                          Detect W83637HF, W83697UF;
1098                          Add it87 sensor type support; add sysfs support
1099                          Reduce lm80 misdetects; remove PCFxxxx "detection"
1100                          Detect VT8237 (KT600)
1101                          Use VPD instead of DMI+ACPI for Thinkpad detection
1102                          Suggest new asb100 driver instead of w83781d
1103
1104
11052.8.1 (20031005)
1106  NOTE: Requires i2c-2.8.1 or newer!
1107  File sensors.conf.eg: Improved adm1025 section
1108                        Default temp labels for as99127f
1109                        Improved lm83 section
1110                        Better support for Asus A7V8X-X
1111  File doc/chips/SUMMARY: Add SMSC manufacturer ID
1112  File doc/chips/adm1025: Add decent documentation (almost new)
1113  File doc/chips/lm83: Known motherboards list update, misc updates
1114  Library: Change adm1025 names (hyst/over become low/high)
1115           Swap adm1025 temp1 and temp2 to match the driver's order
1116           Advance version to 2.0.1
1117           Update lm83 support
1118           Add support for lm90, xeontemp, max6650
1119           Add separate messages for read and write errors
1120           Add missing message for parse error
1121  Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
1122  Modules (various): Fix includes for compilation on Alpha
1123                     Use the new i2c_delay function instead of the various
1124                     do_pause functions
1125  Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
1126  Module i2c-nforce2: Cleanups
1127  Module i2c-i810: Use readl/writel for portable access to PCI memory
1128  Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
1129  Module i2c-savage4: Use readl/writel for portable access to PCI memory
1130  Module i2c-sis630: Fix detection
1131                     Add block data read/write support
1132  Module i2c-sis645: Detection method change/bugfix
1133  Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
1134  Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
1135  Module adm1025: Major driver update
1136                  Add support for Philips NE1619
1137                  Simplify the driver a lot (unified voltages, unified
1138                  temperatures and much more)
1139                  Fix default voltage limits
1140                  Change default temperature limits
1141                  Swap remote and local temperatures to match the internal
1142                  registers order (make the code unification possible)
1143                  Export remote diode fault through alarms
1144  Module ddcmon: Major update
1145                 Add half a dozen new features
1146                 Add checksum parameter (same as for the eeprom module)
1147                 Fix monitor limits
1148  Module eeprom: Ignore Sony Vaio EEPROMs with a password set
1149  Module lm78: Fix a fan_div/fan_min bug
1150  Module lm83: Add t_crit and alarms support
1151  Module lm90: New
1152  Module max6650: New
1153  Module saa1064: New
1154  Module smsc47m1: Add support for 47M142
1155  Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
1156                   enhance w83627thf support
1157  Module w83781d: Enhance chip detection; clean up error returns;
1158                  fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
1159  Module xeontemp: New
1160  Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
1161                           Mark Rambus as unsupported
1162  Program decode-edid.pl: New
1163                          Interfaces between our eeprom module and
1164                          parse-edid from the read-edid project
1165  Program p4b_smbus: Fix SMP compilation
1166  Program sensord: Add support for IT87 (Mike Black)
1167                   Change ADM1025 support to match the changes made to
1168                   the library
1169  Program sensors: Rewrite and enhance EEPROM support
1170                   Change LM83 and ADM1025 support to match the changes
1171                   made to the library
1172                   Add DRDRAM support to print_eeprom
1173                   Exit(1) on /proc write failure (Malte Starostik)
1174                   Add LM90, MAX6650 support
1175  Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
1176                          Add support for LM82, LM86, LM89
1177                          Improved W83781D family detection
1178                          Add support for AS19927F rev.2, ASB100 Bach
1179                          Add support for Asus Mozart-2 (3 types)
1180                          Add support for NE1619
1181                          Add support for FSC Hermes
1182                          Make sure /sbin is in the user's path
1183                          Fix EEPROM detection
1184                          Automatic module.conf and /dev/i2c* detection
1185                          Improve LM82 and LM83 detection
1186                          Handle "to-be-written" cleanly
1187                          Add detection for 47M14x Super I/O
1188                          Handle the one-address-many-chips-same-driver
1189                          case
1190
1191
11922.8.0 (20030714)
1193  NOTE: Requires i2c-2.8.0 or newer!!!
1194  Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
1195                  2.4.13 or later required for mkpatch.
1196  File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
1197                  i2c package
1198  File doc/chips/fscscy: Add watchdog documentation
1199  File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
1200  File sensors.h: Now automatically generated
1201  Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
1202           add adm1026, lm83, lm85, w83791d support;
1203           Advance version to 2.0.0
1204  Makefiles: Generate warnings if new library won't be found by ld.so;
1205             Modules now install in kernel/drivers/i2c/[busses,chips];
1206             Ensure that headers in /usr/local/include are used first;
1207             Don't use /usr/include headers for modules;
1208             Handle multiple UTS_RELEASE definitions in linux/version.h;
1209             Automatically generate kernel/include/sensors.h;
1210             Remove old gzipped modules; remove old misc directory if empty;
1211             Remove pre-2.4 installation method;
1212             -Wall now the default;
1213             Add new targets user, user_install, and help;
1214             Run depmod after module installation
1215  Modules (all): Cleanups including
1216                - Add #include <i2c-proc.h>
1217                - C99 initializers
1218                - Remove #ifdef MODULE
1219                - Remove #ifndef THIS_MODULE
1220                - Remove #ifndef MODULE_LICENSE
1221                - Remove other 2.1/2.2 #ifdefs
1222                - Remove #include "sensors.h", copy SYSCTL defs to module
1223                - Remove excess #includes
1224                - Remove argument in i2c_register_entry()
1225                - Remove dummy xxx_command() definition
1226                - Remove EXPORT_NO_SYMBOLS
1227                - Remove init_MUTEX #define
1228                - Remove xxx_inc_use() and xxx_dec_use() functions; modules
1229                  no longer adjust their own refcounts
1230                - Use module_init() and module_exit()
1231                - Update to new i2c_driver struct definition
1232  Modules (bus PCI): Convert to PCI-module-style initialization
1233  Modules (several): Add support for AMD Opteron VRM (VID) encoding
1234  Module adm1021: Set alarm on failed reads and report old value;
1235                  merge changes from kernel 2.5.54
1236  Module adm1026: New
1237  Module bmcsensors: Fix compile when DEBUG=1
1238  Modules ddcmon, eeprom: Use i2c block reads if possible;
1239                          better error handling
1240  Module ds1307: Add to Makefile
1241  Module gl520sm: Fix temperature over/hyst writes
1242  Module lm75: merge changes from kernel 2.5.54
1243  Module lm83: New
1244  Module lm85: New
1245  Module i2c-ali1535: Check for invalid transaction
1246  Module i2c-ali15x3: Check for invalid transaction
1247  Module i2c-amd756: merge changes from kernel 2.5.54;
1248                     check for invalid transaction
1249  Module i2c-amd8111: merge changes from kernel 2.5.54
1250  Module i2c-i801: Add support for 82801EB (ICH5)
1251  Module i2c-i810: Fix for some chips
1252  Module i2c-nforce2: New
1253  Module i2c-piix4: Check for invalid transaction
1254  Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
1255  Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
1256        north bridges; SiS962 and SiS963 south bridges
1257  Module i2c-viapro: Check for invalid transaction
1258  Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
1259          pwm and pwm enable support; update docs
1260  Module smbus-arp: Check adapter for HW or SW PEC support;
1261                    add reset option
1262  Module w83781d: Add support for w83791d
1263  Module w83627hf: New
1264  Program decode-dimms.pl: Recognize DDR and Rambus
1265  Program eeprom: Fix writes for small eeproms
1266  Program eeprom, eepromer: Use local i2c-dev.h for build
1267  Program fancontrol: New
1268  Program lm_sensors.init: Call sensors -s in start()
1269  Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
1270                   Add adm1026,lm85 support;
1271                   Remove sensors.c file; add sensors_compat.h;
1272                   Remove patches to i2c-core.c and drivers/char/mem.c;
1273                   Now works only for kernels 2.4.13 or later
1274  Program p4b_smbus: Fix 'make install';
1275                     Install in same place as other modules;
1276                     Clear correct bits in config word
1277  Program pwmconfig: New
1278  Program sensors: add adm1026, lm85, w83791d support
1279  Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
1280                          w83627hf, w83627thf, w83697hf);
1281                          Add support for SiS651, SiS961, SiS745, SiS746;
1282                          Support dmidecode 2.0 and later;
1283                          Fix "C" format error;
1284                          Add support for adm1026, 82801EB (ICH5), W83791D;
1285                          Add support for w83l785ts, nForce2;
1286                          Fix UTF-8 incompatibility;
1287                          Better support for lm75;
1288                          Add support for lm83
1289
12902.7.0 (20021208)
1291  NOTE: Requires i2c-2.7.0 or newer.
1292  File doc/busses/i2c-ali1535: Add license, miscellaneous changes
1293  File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
1294  File doc/busses/i2c-sis645: Add license
1295  File doc/chips/lm92: Add license, features
1296  File doc/chips/maxilife: Add license, parameters, features
1297  File doc/chips/smartbatt: Complete rewrite
1298  File doc/chips/vt8231: Add license, parameters
1299  File sensors.conf.eg: Add section for lm75; complete the lm78 section
1300  Library: Add support for MC1066; add multiple VRM version support for lm87;
1301           enhance adm1023 support; initial support for Sony Vaio eeprom;
1302           add support for bmcsensors; add hacks for additional dummy drivers
1303  Makefile: Take kernel source location from /lib/modules/x.x.x/build;
1304            add flags for x86_64 compiles
1305  Module adm1021: Add support for MC1066
1306  Module bmcsensors: New
1307  Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
1308                   kernel 2.5.43; fix 2.2 kernel compiles
1309  Module gl518sm: Iterate allowed only for rev 0x00
1310  Module i2c-amd756: Configure base address for nForce support;
1311                     check for uninitialized base address;
1312                     add support for amd8111 (SMBus 1.0)
1313  Module i2c-amd8111: New (SMBus 2.0)
1314  Module i2c-ipmb: New
1315  Module i2c-ipmi: New
1316  Module i2c-keywest: Sync with kernel 2.4.20
1317  Module i2c-sis630: Add support for SiS730
1318  Module i2c-sis645: Improve support for SiS645/961;
1319                     add support for SiS645DX/961 and SiS735;
1320                     fix 2.2 kernel compiles
1321  Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
1322  Module lm87: Add multiple VRM version support
1323  Module vt1211: Fix inx limits and alarms; fix in0
1324  Module vt8231: Fix inx limits and alarms; fix in0
1325  Module w83781d: Fix in0/in1 initialization
1326  Module smartbatt: New
1327  Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
1328  Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
1329                           stop decoding on checksum error
1330  Program dmidecode: Fix read bug; upgrade to version 1.8
1331  Program doc-insmod: Complete rewrite; fix author output
1332  Program doc-features: Complete rewrite; handle missing sysctl entries;
1333                        handle unknown prefix with suggestion
1334  Program lm_sensors.init: Remove spaces bug; add green/red output
1335  Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
1336  Program rrd: Add sanity limits to newly-created RRD.
1337  Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
1338  Program sensors: Add support for MC1066, Rambus Rimms;
1339                   fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
1340                   initial support for Sony Vaio eeprom
1341  Program sensors-detect: Add support for MC1066, smart battery, 8235,
1342                          IPMI, AMD8111; add help if no sensors found;
1343                          add ACPI method for IBM system detection;
1344                          work with old Perl versions again;
1345                          initial support for Sony Vaio eeprom
1346
13472.6.5 (20020915)
1348  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1349  File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
1350  Library: Fix fan3_div writes for w8378* and it87; add vt8231
1351  Module dmi_scan: new
1352  Module ds1621: Fix enable/disable
1353  Module eeprom: Do not corrupt 24RF08's when checksum=1
1354  Module i2c-i801: Check for uninitialized base address;
1355                   enable if not enabled
1356  Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
1357  Module i2c-sis630: new
1358  Module i2c-sis645: new
1359  Module lm92: Fix in-kernel initialization
1360  Module via686a: Remove VT8231 support
1361  Module vt8231: new
1362  Module w83781: recognize Asus "ASB100 Bach" as AS99127F
1363  Program dmidecode: new
1364  Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
1365  Program mkpatch: Add Config.in entries for, lm92,
1366                   pcf8574, pcf8591, smsc47m1, vt1211;
1367                   add dmi_scan
1368  Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
1369  Program lm_sensors.init: fix stop()
1370  Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
1371                   add support for logging loadavg in RRD;
1372                   fix down-converting raw labels for RRD;
1373                   update chip support, still behind sensors
1374  Program sensors: Add /usr/local/etc to config file path;
1375                   fix -c and -u flags; add vt8231
1376  Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
1377                          refuse to run on IBM systems;
1378                          fix sysconfig module numbering;
1379                          change quick write to not corrupt 24RF08's
1380
13812.6.4 (20020719)
1382  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1383  File doc/vid: New
1384  File include/sensors_vid.h: New
1385  File sensors.conf.eg: Add vt1211, smsc47m1
1386  Library: Add multiple VRM version support for adm1025, w83781d;
1387           fix 'flex scanner jammed' on some systems;
1388           add vt1211, smsc47m1, lm92;
1389           fix access mode checking
1390  Makefiles: For 2.4+ kernels, modules now install in
1391             kernel/drivers/[i2c,sensors] , not misc/ , and
1392             'make install' removes old versions in misc/ .
1393             Use $CFLAGS and $CPPFLAGS if defined.
1394  Module adm1025: Add multiple VID version support
1395  Module ds1307: new
1396  Module i2c-amd756: Add nVidia nForce support; fix block read length;
1397                     reliability improvements
1398  Module i2c-hydra: Flush posted writes
1399  Module i2c-i801: Add support for 82801DB (ICH4)
1400  Module i2c-i810: Flush posted writes
1401  Module i2c-savage4: new
1402  Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
1403  Module i2c-voodoo3: Flush posted writes
1404  Module ds1307: New
1405  Module lm92: New
1406  Module smbus-arp: new
1407  Module smsc47m1: new
1408  Module via686a: Add support for VT8231 sensors
1409  Module vt1211: new
1410  Module w83781d: Add multiple VID version support; fix temp alarms
1411  Program eeprom: new
1412  Program i2cdump: Add smbus block command specification, add PEC support
1413  Program lm_sensors.init: new
1414  Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
1415                   pcf8574, pcf8591, smsc47m1, vt1211
1416  Program p4b_smbus: Add support for ICH4
1417  Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
1418  Program sensord.init: Renamed, was prog/init/sensors
1419  Program sensord: Major update, now requires rrd source;
1420                   not compiled by default
1421  Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
1422                   (don't display algo. and adap.) option;
1423                   add vt1211, smsc47m1, lm92
1424  Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
1425                          add 82801DB, LM85; fix perl warnings;
1426                          generate /etc/sysconfig/lm_sensors for
1427                          lm_sensors.init script
1428
14292.6.3 (20020322)
1430  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1431  Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
1432  File doc/chips/it87: add more temp_type help
1433  File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
1434                        add adm1021 section; add lm87 AIN[1,2] template;
1435                        swap negative voltage limits for 782d,783s,627hf,
1436                        697hf,it87; add more it87 help; swap neg. voltage
1437                        limits for lm78(-j), lm79, w83781d, as99127f
1438  Library: Add PCF8591, W83697HF, ADM1023 support;
1439           fix w83* fan_min computes;
1440           swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
1441  Module adm1024: Add MODULE_LICENSE("GPL")
1442  Module bt869: Add s-video out and DVD resolution support
1443  Module eeprom: Add support for locations 128-255; rename /proc entries in hex
1444  Module fscscy: implement min/max for voltages and fans
1445  Module i2c-amd756: Add support for AMD768
1446  Module i2c-i810: Add support for 810E
1447  Module i2c-keywest: Big update, sync with kernel 2.4.18
1448  Module i2c-piix4: Check for uninitialized base address
1449  Module i2c-sis5595: Blacklist 645, 735
1450  Module i2c-viapro: Check for uninitialized base address
1451  Module gl518sm: Standardize /proc entries in0-3
1452  Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
1453               fan -> fan1; fix temp2 limit writes
1454  Module pcf8574: Add support for PCF8574A; /proc interface changed
1455  Module pcf8591: new
1456  Module sis5595: Blacklist 645, 735
1457  Module w83781d: Add W83697HF support; allow force_subclients parameter
1458                  for Tyan 2460
1459  Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
1460  Program decode-vaio.pl: new
1461  Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
1462                   add text output
1463  Program init/sensors: New SysV init script
1464  Program mkpatch.pl: Add support for fscscy, add more help entries
1465  Program p4b_smbus: new
1466  Program rrd: Install summ_week.cgi
1467  Program sensors: Add PCF8591, W83697HF, ADM1023 support,
1468                   clean up chassis intrusion prints
1469  Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
1470                          fix Via686a and it87 detection;
1471                          add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
1472                          fix uninitialized values; it87 beats lm78
1473
14742.6.2 (20011118)
1475  NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
1476  Chip Modules (all): malloc.h -> slab.h
1477  Modules (all): Add MODULE_LICENSE("GPL")
1478  File doc/FAQ: More updates and additions
1479  File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
1480  Library: Add fscpos and fscscy support, fix gl520 in4 ID,
1481           update it87 alarm ID's.
1482  Module fscpos: new (Fujitsu-Siemens Poseidon driver)
1483  Module fscscy: new (Fujitsu-Siemens Scylla driver)
1484  Module i2c-amd756: Improve busy handling/printk's
1485  Module i2c-i801: Add 82801CA/CAM support
1486  Module i2c-keywest: Sync with PPC people, it works now
1487  Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
1488  Module i2c-viapro: Add Via VT8233 support
1489  Module it87: Merge alarm_* /proc entries to alarms
1490  Module sis5595: Fix support for rev B0
1491  Module via686a: Make limit initializations reliable
1492  Module w83781d: Allow init=0 parameter to bypass initialization
1493  Program isadump: Add flat address space (PCI) support
1494  Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
1495                      fscpos, it87, maxilife, mtp008
1496  Program sensors: Fix w83781d temp precision
1497  Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
1498                          Fujitsu Poseidon and Scylla,
1499                          Intel 82443MX and 82801CA/CAM detection,
1500                          add ITE 8172G detection (driver in kernel 2.4.10)
1501
15022.6.1 (20010830)
1503  File BUGS: Updated
1504  File doc/FAQ: More updates and additions
1505  File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
1506  File sensors.conf.eg: Fix/enhance it87 section
1507  Library: ds1621 and it87 updates
1508  Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
1509  Module i2c-amd756: Add AMD 766 support
1510  Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
1511  Module i2c-piix4: Add Serverworks CSB5 support
1512  Module i2c-sis5595: Recognize unsupported chips and refuse to load
1513  Module adm1025: Fixed temp2 min/max writes
1514  Module ds1621: Add 12-bit precision mode
1515  Module it87: Enable all alarms, add in8 support, add sensor type selection
1516  Module sensors: Don't initialize i2c-proc (moved to i2c-core);
1517                  remove support for module
1518  Module sis5595: Recognize unsupported chips and refuse to load
1519  Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
1520  Program eepromer: new
1521  Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
1522                      of sensors.c as a module in kernel
1523  Program sensors: it87 updates; adjust temp. precision for some chips
1524  Program sensors-detect: Fix ADM1024 and ADM1025 detection;
1525                          recognize unsupported SiS chips;
1526                          recognize AMD 766 and Serverworks CSB5.
1527
15282.6.0 (20010612)
1529  NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
1530        If your make fails because it can't find <linux/i2c-proc.h>, you
1531        forgot this step!!!
1532  File doc/FAQ: Many, many updates and additions
1533  File doc/busses/i2c-sis5595: new
1534  File doc/busses/i2c-tsunami: new
1535  File doc/chips/it87: new
1536  File doc/chips/via686a: Claim support for 686b.
1537  File README.thinkpad: new
1538  File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
1539                        Add lm87, adm9240, ds1780, lm81 templates;
1540                        Enhance help comments in file;
1541                        Add Tyan S2510 dual-MTP008 example;
1542                        Make separate sis5595 section.
1543  Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
1544  Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
1545  Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
1546           Add support for maxilife-nba and amd1024;
1547           Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
1548  Chip Modules (all ISA): Remove #include "i2c-isa.h"
1549  Chip Modules (all): Change from sensors_* to i2c_* globals
1550                      for new i2c-proc.[ch]
1551  Makefiles: enhance to support Alpha architecture
1552  Module adm1021: Fix lm84 and gl523sm support
1553  Module adm1024: new
1554  Module i2c-i801: Chip detection cleanup
1555  Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
1556  Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
1557  Module i2c-tsunami: New
1558  Module i2c-via: Ensure i2c bus is tristated correctly.
1559  Module it87: new driver for IT8705, IT8712, Sis950 chips
1560  Module lm78: Recognize chipid=0x20
1561  Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
1562  Module mtp008: Fix temp initializations;
1563                 Save BIOS pin configuration of temps and fans;
1564                 Fix sensor type reads/writes and fan min writes;
1565                 Fix spurious invalid sensor type messages
1566  Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
1567                  used for patched kernel now.
1568                  Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
1569  Module sis5595: Fix temp, add in4 for chip revision 0xc0;
1570                  Allow force_addr=0xaddr
1571  Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
1572  Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
1573                  reading changes; Add messages for subclient
1574                  registration failure
1575  Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
1576  Program i2cset: new
1577  Program isadump: fix for Alpha arch. compiles
1578  Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
1579                      Remove ltc1710; Fix i2c_sis5595 typo;
1580                      Support kernel 2.4.5 makefile change;
1581                      Add i2c-tsunami; fixed i2c-voodoo3 configuration
1582  Program sens_update_rrd: new
1583  Program sensord: Add -d (debug) and -p (pid-file) options
1584  Program sensors: Change reported version from 1.3 to the lm_sensors version;
1585                   Fix swapped limit and hysteresis on 9240, 5595, 686a;
1586                   Change mtp008 temps from max/min to limit/hyst;
1587                   Add maxilife-nba, adm1024, it87 support.
1588  Program sensors-detect: Recognize lm78 with chipid=0x20;
1589                          Recognize SMSC Victory66 South Bridge;
1590                          Add devfs /dev/i2c/x support;
1591                          Add adm1024, it87xx support; Add thinkpad warning.
1592  Program tellerstats: new
1593
15942.5.5 (20010115)
1595  NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
1596        you have kernel 2.4.0-prerelease or greater.
1597  Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
1598  File doc/developers/proc: new
1599  File sensors.conf.eg: Add mtp008 entries, adm1025 entries
1600  Library: Add ds1621, mtp008 support
1601  Module adm1021: Add support for adm1021a / adm1023
1602  Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
1603  Module adm1025: Add support for remote temp; rename /proc entries to
1604                  in[0-5] and temp[1-2]; fix negative temp readings
1605  Module adm9240: Rename /proc entries to in[0-5]
1606  Module ddcmon: allow force and force_ddcmon parameters
1607  Module ds1621: new
1608  Module i2c-ali1535: Enhance error checking and recovery; add mutex
1609  Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
1610  Module i2c-piix4: add support for ServerWorks southbridge OSB4
1611  Module lm87: cleanup, update voltage calculations
1612  Module mtp008: new
1613  Module pcf8574: change update time to 5 seconds
1614  Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
1615  Module w83781d: fix beep setting via /proc
1616  Programs editticket, readticket: new
1617  Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
1618  Program mkpatch.pl: more fixes; now adds many more modules
1619  Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
1620                   add adm1025 temp2; report temp limits correctly as
1621                   min/max or limit/hysteresis; print message if no
1622                   sensors are found. Removed false errors from lm87 reads.
1623  Program sensors-detect: Add ds1621, mtp008 detection;
1624                          add ServerWorks detection
1625
16262.5.4 (20001012)
1627  Module i2c-viapro: Add support for Via 596B (0x3051)
1628  Program m7101: moved to CVS tree, updated for 2.4.0 kernels
1629  Program mkpatch.pl: fixed infinite loop
1630  Program sensors-detect: Detect Via 596B (0x3051)
1631
16322.5.3 (20001008)
1633  NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
1634  File useful_addresses.html: update
1635  Library: Add lm87 support
1636  Module pcf8574: new
1637  Module i2c-ali1535: new
1638  Module i2c-ali15x3: removed force #ifdef.
1639  Module i2c-i801: support Intel 82801BA (815E chipset)
1640  Module i2c-i801: add i2c block write support, fix smbus block bugs
1641                   (requires i2c 2.5.3 package)
1642  Module i2c-i810: support Intel 82815
1643  Module lm87: new
1644  Module sensors: Fix for kernel 2.4.0-test8
1645                  (remove copy_to_user_ret and put_user_ret)
1646  Module w83781d: limit fan divisors to 8 max. for as99127f
1647  Program decode-dimms: Add html output option, update for SPD spec 1.2B.
1648  Program i2cdump: Add smbus block read support
1649  Programs i2cdetect, i2cdump: Improve error reporting
1650  Program sensors: new switch -u (--unknown)
1651  Program sensors-detect: detect Intel 82801BA (815E chipset)
1652  Program sensors-detect: detect Intel 82815
1653  Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
1654  Program sensors-detect: detect National LM87
1655  Program sensors-detect: detect nVidia devices supported by i2c-riva.o
1656  Program sensors-detect: Improve error reporting
1657
16582.5.2 (20000709)
1659  File sensors.conf.eg: Fix lm80 in8 calculation
1660  Module w83781d: W83783S no longer crashes on unloading
1661  Program sensors-detect: more robustness in case of unknown i2c adapters
1662  Program sensors-detect, libsensors: fix eeprom size reporting
1663  Program sensord: more flexibility, support for alarm scanning etc.
1664  Program sensors: support for ignore setting on sensor alarms.
1665  Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
1666
16672.5.1 (20000618)
1668  Library: Add adm1025 support
1669  Module adm1025: new
1670  Module ddcmon: Fixed bus scan which could hang SMBus
1671  Module i2c-keywest: new
1672  Module maxilife: Add support for Maxilife '99 (NBA)
1673  Module via686a: Enable sensors if not enabled by BIOS
1674  Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
1675  Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
1676  Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
1677  Module w83781d: Fis as99127f fan speed (was 66% too high)
1678  Module w83781d: Improve beep input checking
1679  Program i2cdump: Add Winbond-style bank selection
1680  Program isadump: Add Winbond-style bank selection
1681  Program sensors: Add adm1025 support.
1682  Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
1683  Program sensors-detect: Fix i801 detection, add adm1025 driver entry
1684  File sensors.conf.eg: Add Maxilife '99 entries
1685  File sensors.conf.eg: Remove some as99127f entries.
1686    Note: For as99127f, reinstall sensors.conf.eg manually (make install
1687          won't reinstall it) or else 'sensors -s' will fail.
1688
16892.5.0 (20000312)
1690  Dropped all kernel 2.0 and 2.1 compatibility
1691  Module i2c-i810: new
1692  Module ddcmon: new
1693  Module via686a: new
1694  Module i2c-amd756: fixed region request
1695  Module i2c-voodoo3: Converted to use i2c-algo-bit layer
1696  Module w83781d: Don't change pin settings at initialization;
1697                  also fix chip detection.
1698  Library: Support for ddcmon and via686a
1699  Program sensors-detect: Support for ddcmon and via686a
1700  Program sensors: Support for eeprom, ddcmon and via686a
1701
17022.4.5 (20000116)
1703  Introduced DESTDIR installation prefix
1704  Module lm80: fixes, temperature now read and set correctly
1705  Module i2c-voodoo3: driver enhancements
1706  Module w83781d: fixes, AS99127 works much better now
1707  Library: New ignore keyword in config file
1708  Programs: Support for new ignore keyword
1709  Program sensors-detect: Support for MGA detections
1710
17112.4.4 (19991201)
1712  Addition of the alpha release of AMD 756 SMBus host support.
1713  Many fixes and updates to the gl518sm driver
1714  Updates and fixes for device detection
1715
17162.4.0 (19990920)
1717  Too much to list.
1718  i2c and smbus parts are split off to a separate i2c package.
1719  New drivers and other stuff.
1720
17212.3.4 (19990616)
1722  Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
1723  All: Now compiles against kernel 2.0.x (again ;)
1724  Module gl518sm: some updates and refinements
1725
17262.3.3 (19990603)
1727  All: Now compiles against kernel 2.3.x (x >= 1)
1728  Module i2c-voodoo3: Timing issue fixes
1729  Module bt869: Seems to be functional and relatively well tested
1730  Many modules were modified to be more compatible with the new
1731   Mutex structure in the new experimental kernels.
1732
17332.3.2 (19990507)
1734  Module i2c-hydra: Now compiles on 2.0.x kernels
1735  Module i2c-lm75: Slightly better detection
1736  * New, but not compiled by default:
1737  Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
1738  Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
1739
17402.3.1 (19990501)
1741  All: Now compiles on PPC
1742  Module i2c-hydra: NEW
1743  Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
1744  Module w83781d: Removed deadlock (mutex was not initialized)
1745  Documentation: A few glitches removed
1746  Makefile: default module installation directory is now
1747            /lib/modules/current/extra/misc
1748  Program sensors-detect: PPC Hydra now detected
1749  Program sensors: Now prints complete GL518SM information
1750  Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
1751
17522.3.0 (19990422)
1753  All: Many, many changes and improvements
1754  All: Many small bugs and problems removed
1755  Modules: New insmod parameters
1756  Modules: Much improved chip detection
1757  Module maxilife: NEW
1758  Module adm1021: MAX1617A now also supported
1759  Module adm9240: DS1780 now also supported
1760  Module w83781d: W83782D and W83783S now also supported
1761  Program sensors-detect: NEW
1762  Library: All chips now supported
1763  Documentation: Very much improved
1764
17652.2.2 (199903??)
1766  Just some minor updates and bug fixes.
1767
17682.2.1 (19990218)
1769  All: Removed compile warnings
1770  Module i2c-dev: Small bug removed if DEBUG=1 was used
1771  Module sis5595: Now compiles for 2.0 kernels
1772  Module adm1021: Detection corrected
1773
17742.2.0 (19990216)
1775  All: Set copyrights to include 1999
1776  All: Small bugfixes
1777  I2C: Upgraded to newest archive of Simon Vogl
1778  Module i2c-dev: NEW
1779  Module i2c-ali15x3: NEW
1780  Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
1781     directories, and somewhat improved
1782  Module sis5595: NEW
1783  Modules: Renamed all bus modules to i2c-*, new directory lay-out
1784  Library: Support for new chip drivers, several small bugs fixed
1785  Library manual pages: NEW
1786  Program i2cdetect: Moved to detect directory
1787  Program detect.pl: NEW
1788  Program doc-features: NEW
1789  Program sensors: Added man-page
1790  Document BUGS: Added cdrom bug and kernel i2c conflict
1791
17922.1.2 (19990116)
1793  Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
1794  Module gl518sm.o: yet more bug fixes. It should at long last be usable now
1795  Documentation in doc/kernel: NEW
1796
17972.1.1 (19990107)
1798  Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
1799                     and older
1800  Module gl518sm.o: Miscelaneous bugs and problems solved
1801  Program isadump: NEW
1802
18032.1.0 (19981230)
1804  Library: Completely NEW
1805  Program sensors: NEW
1806  Program grab_busses: NEW
1807  Program decode-dimms: More information
1808  Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
1809  Module w83781d.o: NEW
1810  Module lm80.o: NEW
1811  Module gl518sm.o: new procfile beep, several small updates
1812  Modules: Now use pin readings, no more scaling within the kernel (use the
1813           library instead)
1814
18152.0.2 (19981214)
1816  Module eeprom.o: NEW
1817  Program decode-dimms: NEW
1818  Modules: fill_inode fix, will stop segfaults on unloading in kernels after
1819           2.1.58
1820  Modules: Somewhat less verbose on transfers
1821  Module lm78.o now recognizes and handles lm78-j and lm79
1822
18232.0.1 (1998121?)
1824  Module gl518sm.o updates, to make it actually work
1825  Module lm75.o high/low-byte swapping write bug fixed
1826
18272.0.0 (19981209)
1828  Initial release
Note: See TracBrowser for help on using the browser.