root/lm-sensors/trunk/CHANGES @ 5909

Revision 5909, 17.9 KB (checked in by groeck, 4 years ago)

Update changelog to reflect that EMC1023, EMC1043, EMC1053, and EMC1063 are now detected

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm-sensors CHANGES file
2-----------------------
3
4SVN HEAD
5  Makefile: Check for bison and flex
6  libsensors: Add support for intrusion detection (#2370)
7              Compute MAX_SUBFEATURES at run-time (#2378)
8              Compute MAX_*_SENSOR_TYPES at build time (#2378)
9              Add support for new sysfs attributes
10  sensors.conf.default: Add a section for the W83627THF
11                        Add a section for the SCH5127
12                        Add a section for the W83627UHG
13  sensors: Display 3 decimal places in raw output
14           Add support for intrusion detection (#2370)
15  sensors-detect: Improve LM90 and W83L771 detection
16                  Fix error seen if I2C bus numbers are not sequential
17                  Add detection of SMSC EMC1423
18                  Add detection of the Analog Devices ADT7410
19                  Add detection of the National Semiconductor LM94
20                  Add detection of the ITE IT8728F
21                  Implement universal detection for coretemp (#2381)
22                  Add detection of Maxim MAX6639
23                  Add detection of EMC1023, EMC1043, EMC1053, and EMC1063
24
253.2.0 (2010-10-10)
26  libsensors: Increase MAX_SENSORS_PER_TYPE to 24
27              Map individual beep features
28              Change license to LGPL
29  pwmconfig: Sample all fan speeds before returning to full speed (#2380)
30             Wait for fans to return to full speed only once per PWM
31             Drop legacy invocations of cut
32  sensors.conf.default: W83667HG config is similar to W83627EHF/DHG
33  sensord: Fix support of multiple chips (#2377)
34  sensors: Properly handle sensor input read errors
35  sensors-detect: Give udev time to settle before accessing i2c nodes
36                  Add support for Intel PCH (SMBus)
37                  Add support for SMSC EMC1403 and EMC1404
38                  Fix detection of RB-C3 AMD Family 10h CPU
39                  Add support for SMSC EMC2103
40                  Add support for Fintek F71889ED
41                  Add support for ITE IT8721F
42                  Fix Maxim MAX6690 support
43                  Fix handling of duplicate detections
44                  Add support for STMicroelectronics STTS424
45                  Add support for NXP SE97 / SE97B
46                  Add reference to NCT6771F/NCT6772F/NCT6775F
47                  Add support for several JC42.4 compliant temperature sensors
48                  Add support for ITE IT8512E/F and IT8758E
49
503.1.2 (2010-02-02)
51  libsensors: Support upcoming sysfs path to i2c adapters
52              Add support for HID devices
53  fancontrol: Check that all referenced sysfs files exist
54              Check that all devices match the configuration file
55  pwmconfig: Exit immediately if not root
56             Save device paths and names in configuration file
57  sensors.conf.default: Encourage user to not modify this file
58                        Add a section for adt7473 and adt7475
59                        Add a section for adt7476 and adt7490
60  sensord: Don't name our variables "alarm"
61           Major refactoring including
62           - Cleanup of huge functions
63           - Remove needless casts
64           - Fix coding style
65           - Break long lines
66           - Make functions more robust
67           - Remove unused return value
68           - Make CGI script more XHTML compatible
69  sensors: Fix iconv-related build warning in set_degstr
70  sensors-detect: Refer to tmp401 driver if TMP411 is detected
71                  Clean up the discovery of i2c adapters
72                  Report unsupported Access Bus adapters
73                  Add detection for TI's TMP421, TMP422 and TMP423 chips
74                  The SMSC LPC47M233 isn't currently supported
75                  Support upcoming sysfs path to i2c adapters
76                  Rename the modprobe configuration file to lm_sensors.conf
77                  Only report AMD Family 10h CPU with working sensors
78                  Add detection for AMD Family 11h thermal sensors
79                  Add detection for Intel Atom thermal sensors
80                  Add detection for National Semiconductor LM73
81                  Add SMBus detection for AMD Hudson-2
82                  Add detection for Nuvoton W83667HG-B and W83677HG-I
83                  Add detection for Analog Devices ADT7490
84                  Refer to f71882fg driver if F71889FG is detected
85                  Add detecton for Fintek F71869FG
86                  Detect ADT7473 at 0x2c and 0x2d
87                  More known revisions for the ADT7476
88                  Add detection for Nuvoton W83L771AWG/ASG
89                  Add detection for VIA Nano
90                  Add detection for Texas Instruments AMC6821
91                  Add detection for Analog Devices ADT7411
92  sysconfig-lm_sensors-convert: Fix exit code
93
943.1.1 (2009-06-21)
95  isadump: Use geteuid instead of getuid so that setuid bit works
96  isaset: Use geteuid instead of getuid so that setuid bit works
97  libsensors: Don't rely on dirent->dt_type being set
98              New method to free the memory allocated for chip names
99  Makefile: Include generated source files in dependency checking
100            Make it possible to skip building of the static library
101  fancontrol: Add support for absolute path to hwmon devices
102  sensord: Remove the hidden commandline interface
103           Introduce struct sensord_arguments
104           Using sigaction for signal handlers
105           Convert to linux coding style
106           Cleanup and refactoring of the source code
107           Don't use the system log when generating a CGI script
108           Disable unit scaling for fan speeds
109           Use daemon logging facility instead of local4 by default
110           Fix a memory leak when a chip name is provided
111  sensors: Fix a memory leak when a chip name is provided
112  sensors-detect: Add nNidia nForce MCP78S SMBus detection
113                  Display Super-I/O address even if LD is disabled
114                  Differentiate between PC8374L and WPCD377I
115                  Use dmidecode to find IPMI interfaces if available
116                  Add Nuvoton W83795G/ADG detection
117                  Add National Semiconductor LM95241 detection
118                  Add Winbond/Nuvoton W83627DHG-P and W83627UHG detection
119
1203.1.0 "Happy Birthday Lina" (2009-02-28)
121  libsensors: Add support for instantaneous power sensors
122              Add support for current sensors
123              Fix error propagation during expression evaluation
124              Detect excessive recursion depth during expression eval (#2365)
125              Return a string rather than NULL for unknown errors
126              Skip non-file sysfs entries for speed
127              Fix memory leak in scanner when using flex 2.5.9 or later
128              Report configuration file read errors
129              Exit the configuration file parser sooner
130              Free bus statements from the configuration file sooner
131              Read extra configuration files from /etc/sensors.d (#2174)
132              Report the configuration file name on parse errors
133              Add support for ACPI devices
134  libsensors.3: Reformat for clarity
135                Document function sensors_snprintf_chip_name
136                Document error-related functions
137  lm_sensors.init: Support new format of /etc/sysconfig/lm_sensors (#2246)
138                   Drop support for kernels 2.4 and earlier
139  lm_sensors.init.suse: Delete (actual SuSE script is much different)
140  Makefile: Install sensors.conf.default instead of sensors.conf.eg (#2333)
141  pwmconfig: Drop support for kernels 2.4 and earlier
142  fancontrol: Don't round temperature values
143              Drop support for kernels 2.4 and earlier
144              Exit if configuration file can't be read
145              Create pid file only after successful initialization
146  maxilife scripts: Delete (driver never ported to Linux 2.6)
147  sensord: Accept negative temperatures in RRD database
148           Don't bail out on transient errors (#2330)
149  sensors: Add support for instantaneous power sensors
150           Add support for current sensors
151           Fix exit code in error case
152  sensors.conf.5: Lots of additions and reworks
153  sensors.conf.default: New, minimum version of sensors.conf.eg (#2333)
154                        Add sections for the SMSC SCH311x and SCH5027
155  sensors.conf.eg: The LM99 offset is now handled in the lm90 driver
156                   Move help section to sensors.conf.5
157                   Add a section for the Asus/Fintek F8000
158  sensors-detect: Fix detection of ADT7463 and LM96000
159                  Add VIA VX800/VX820 SMBus support
160                  Fix detection of Intel 5000 series FB-DIMM AMB
161                  Fix detection of ADT7462
162                  Fix detection of SMSC LPC47M292
163                  Add SMSC LPC47M233 support
164                  Drop support for Linux 2.4 (#2325)
165                  Handle special case chips more efficiently
166                  Fix SMBus detection of W83627EHF and W83627DHG
167                  Get I2C adapter driver names from sysfs (#2328)
168                  Drop old SiS I2C adapter entries
169                  Drop separate LM78-J entry
170                  Merge all Mozart-2 entries
171                  Merge both GL518SM entries into one
172                  Complete GL520SM detection
173                  Improve GL525SM detection a bit
174                  Let kernel 2.6.28 and later handle chips aliases
175                  Unload kernel drivers when we are done with them (#2329)
176                  Fix handling of bus driver names with an underscore
177                  Simplify loading of bus drivers
178                  Fix bus number prediction logic (#2327)
179                  Suggest the sbs driver for smart batteries
180                  Drop alias detection for Super-I/O chips
181                  Move alias detection after all chip detections
182                  Probe chip types from safest to more risky (#2322)
183                  Add an option to skip ISA probes except IPMI
184                  Skip ISA detection by default if a Super I/O was found (#2322)
185                  Do not scan I2C adapters on multimedia cards by default
186                  Skip SMBus probing by default if a Super I/O was found (#2322)
187                  Display I2C address statictics with --stat
188                  Document the new detection order and rules
189                  Gather DMI data and print it at start-up
190                  Always probe the SMBus on Asus, Tyan and Supermicro boards
191                  Move IPMI interface detection to its own section
192                  Skip IPMI probing on laptops
193                  Add Winbond/Nuvoton W83667HG support
194                  Add Intel Core I7 support
195                  Generate new format for /etc/sysconfig/lm_sensors (#2246)
196                  Print warnings about missing modules on screen
197                  Fix detection of older DS1621
198                  Add nNidia nForce MCP67, MCP73, MCP79 SMBus support
199                  Exclude auto-loaded PCI and USB drivers from list (#2368)
200                  Special case probing i2c address 0x73 (to not crash FSC ICs)
201                  Add detection of FSC Hades and Syleus IC's
202                  Add detection of Winbond WPCD377I (no sensors)
203  sensors-detect-stat.pl: Delete (functionality merged into sensors-detect)
204  sysconfig-lm_sensors-convert: Sample config file conversion script (#2246)
205
2063.0.3 (2008-09-28)
207  libsensors: Avoid namespace pollution
208  fancontrol: Don't use named pipes when we don't need them (#2319)
209  pwmconfig: Tell the user about gnuplot if it isn't installed
210             Fix MINSTOP and MINSTART test functions (#2340)
211             Test MINSTOP before MINSTART
212             Use better step values for MINSTOP test
213             Print the revision and date at start-up
214             Detect and report obviously incorrect fan speeds
215             Determine MINSTOP automatically
216             Skip MINSTOP and MINSTART tests if fan can't stop
217             Change default for MINTEMP from 0 to 20 degrees C
218             Add support for attributes in the hwmon class device (#2260)
219             Update manual page
220  sensors.conf.eg: Drop "label temp#_crit" statements
221  sensors-detect: Add Intel SCH (bus) support
222                  Add SMSC EMC6D103 support
223                  Improve MAX6657, MAX6658, MAX6659 detection
224                  Cache the byte data reads (#2326)
225                  Add Maxim MAX6654/MAX6690 support
226                  Add National Semiconductor LM95231 support
227                  Add Analog Devices ADT7481 support
228                  Refactor alias detection functions
229                  Fix Andigilog aSC7621 support
230                  Add Texas Instruments THMC51 support
231                  Fix Analog Devices ADT7461 support
232                  Add VIA C7 support
233                  Fix Winbond W83L786NR/NG/R/G support (#2336)
234                  Add Maxim MAX6646/MAX6647/MAX6649 support
235                  Add VIA VT1212 support
236                  Add SMSC EMC2700LPC support
237                  Add ITE IT8720F support
238                  Add Texas Instruments TMP411 support
239                  Prevent misdetection of W83627DHG on I2C as LM78
240                  W83627DHG has no subclients
241                  Add Maxim MAX1618 support
242
2433.0.2 (2008-05-18)
244  documentation: Delete the FAQ, now maintained on the wiki
245  libsensors: Use __func__ instead of __FUNCTION__
246              Parse the configuration file in C locale
247              Late compute statements override early ones
248              Support virtual hwmon devices (#2309)
249              Support power and energy sensors
250              Support DOS-style configuration files again (#2284)
251  pwmconfig: Don't create the configuration file before it's needed
252             Don't preserve configuration file customizations
253             Fix permissions of the configuration file
254             Don't start if fancontrol is running (#2299)
255  fancontrol: Don't start if already running (#2299)
256              Delete fancontrol.pid at exit time (#2299)
257  sensord: Fix support of multiple chip names on the command line (#2321)
258  sensors: Print energy and power sensors with automatically scaled units
259  sensors-detect: Add SMSC SCH5027D detection
260                  Do not access I/O ports on PPC
261                  Move south bridge sensor detection to the right section
262                  Run chip_special_cases() earlier
263                  New device ID for the SMSC SCH5317
264                  Add SMSC SCH5127 detection
265                  Add National Semiconductor LM64 detection
266                  Add Asus F8000 detection
267                  Add Intel ICH10 (bus) detection
268                  Don't probe I2C addresses 0x40-0x47
269                  Fix the parsing of I2C addresses not to scan
270                  Detect and skip 1-register-only I2C devices
271                  Avoid SMBus word transactions where possible
272                  Add Dallas DS1631 detection
273
2743.0.1 (2008-01-28)
275  documentation: Update the application writing guidelines
276  libsensors: No longer depend on libsysfs (#2262)
277              Don't guess the bus type from the device ID format (#2240)
278              Add support for attributes in the hwmon class device (#2260)
279  Makefile: No warnings about ld configuration for staged installations
280            Document the variable overriding mechanism (#2296)
281  pwmconfig: Really hide errors on sysfs writes
282             Deal gracefully with read-only pwm_enable files
283             Warn about outputs found in automatic mode
284             Repeat available configuration options before prompt (#2289)
285             Fix duplicate warning message when config file is broken
286  fancontrol: Detect improperly formatted FCTEMPS value (#2293)
287  sensord: Fix rrd support (#2276)
288           Use the same colors for daily and weekly charts
289           Drop workaround needed by old versions of rrdtool
290  sensors: Fix error path on library initialization error
291  sensors.conf.eg: Fix voltage value references (g520sm, lm80, pc87366)
292  sensors-detect: Drop PCA9540 detection
293                  Improve sysconfig and modprobe.d integration
294                  Add SMSC SCH5514D-NS detection (no sensors)
295                  Lower the confidence of MAX6650/MAX6651
296                  Add Fintek F71858DG detection
297                  Add Fintek F81216D detection (no sensors)
298  unhide_ICH_SMBus: Add support for the 82801AA (ICH)
299
3003.0.0 (2007-11-24)
301  Makefile: Fix MODULE_DIR usage in etc
302            Fix build on PPC
303  pwmconfig: Better diagnostics in pwmdisable
304             Give the fans some time to spin up
305  sensors-detect: Add Texas Instruments TMP401 detection
306                  Mention the f75375s driver
307                  Add SMSC LPC47B367-NC detection (no sensors)
308                  Reduce w83781d/lm78 I2C address probing range
309                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection
310
3113.0.0-rc3 (2007-10-28)
312  libsensors: Add a default configuration file
313              Fix memory leaks on initialization error
314              Make the configuration file optional
315              Change the default configuration file to /etc/sensors3.conf
316  sensord: Reload config on SIGHUP rather than automatically
317           No default configuration file name
318  sensors: Fix file handle leak on library initialization error
319           Handle the case where voltage measurements aren't available
320           No default configuration file name
321           Install as sensors again
322  sensors.conf.eg: Install as sensors3.conf
323  sensors-detect: Fix SMSC LPC47B357/M967 detection
324                  Select the right driver for FSC chips
325  sensors-detect-stat.pl: Handle alternative chip lists
326
3273.0.0-rc2 (2007-10-10)
328  useful_addresses.html: Moved to the wiki
329  Makefile: Add sensors-conf-convert to make install
330  libsensors: Notify the caller when writing a value fails
331              Differentiate between different read error types
332              Report I/O errors as such
333  sensord: Log the error code on failure
334           Drop the configuration file search path mechanism (#2259)
335           Manual page update
336  sensors: Fix spurious critical temperature alarm
337           Print error messages to stderr
338           Make error messages more helpful and consistent
339           Better handling of the fault flags
340  sensors-conf-convert: Add a short help text
341  sensors-detect: Fix SMSC SCH311x detection
342                  Add AMD K10 CPU sensor detection
343
3443.0.0-rc1 (2007-09-25)
345  Initial release
Note: See TracBrowser for help on using the browser.