root/lm-sensors/trunk/CHANGES @ 6001

Revision 6001, 20.2 KB (checked in by khali, 2 years ago)

fancontrol: Output error messages to stderr

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm-sensors CHANGES file
2-----------------------
3
4SVN HEAD
5  fancontrol: Support setup where one PWM output controls several fans
6              Output error messages to stderr
7  sensors-detect: Stop calling for PIIX5 SMBus testers
8                  Improve filtering of fake DMI data
9                  Print DMI system/product version if available
10                  Fix loading of the cpuid module
11                  Make LM73 detection less problematic
12                  Add detection of National Semiconductor LM96163
13
143.3.1 (2011-07-21)
15  isadump: Add support for word (16-bit) and long (32-bit) reads
16  isaset: Add support for word (16-bit) and long (32-bit) writes
17  sensors.conf.default: Add a section for the EMC6W201
18  sensors-detect: Add AMD family 15h CPU detection
19                  Add detection of ADT7461A / NCT1008
20                  Add detection of ITE IT8516E/F/G
21                  Integrate with systemd
22                  Drop unreliable smart battery detection
23                  Add detection of SMSC EMC6W201
24                  Drop unreliable detection of Maxim MAX6650
25                  Add detection of SMSC EMC2300
26                  Add detection of MAX6642
27                  Add detection of ITE IT8772E
28                  Don't advertise the ipmisensors driver
29                  Add detection of SA56004
30                  Add detection of LM95245
31
323.3.0 (2011-03-28)
33  Makefile: Check for bison and flex
34  libsensors: Add support for intrusion detection (#2370)
35              Compute MAX_SUBFEATURES at run-time (#2378)
36              Compute MAX_*_SENSOR_TYPES at build time (#2378)
37              Add support for new sysfs attributes (#2379)
38              Add support for humidity sensors
39              Limit symbol visibility
40  sensors.conf.default: Add a section for the W83627THF
41                        Add a section for the SCH5127
42                        Add a section for the W83627UHG
43                        Add a section for the W83795G/ADG
44                        Add a section for the F81865F
45  sensors: Display 3 decimal places in raw output
46           Add support for intrusion detection (#2370)
47           Fix automatic unit selection of 0 value
48           Added support for additional sensor attributes (#2379)
49  sensors-detect: Improve LM90 and W83L771 detection
50                  Fix error seen if I2C bus numbers are not sequential
51                  Add detection of SMSC EMC1423
52                  Add detection of the Analog Devices ADT7410
53                  Add detection of the National Semiconductor LM94
54                  Add detection of the ITE IT8728F
55                  Implement universal detection for coretemp (#2381)
56                  Add detection of Maxim MAX6639
57                  Add detection of SMSC EMC1023, EMC1043, EMC1053, and EMC1063
58                  Add detection of Nuvoton NCT5571D, NCT5577D and NCT6776F
59                  Add detection of SMSC EMC1002, EMC1033, EMC1046, EMC1047,
60                        EMC1072, EMC1073, EMC1074, EMC1402, and EMC1424
61                  Fixed address ranges checked for SMSC EMC1403 and EMC1404.
62                  Fix detection of SPD EEPROM on DDR3 memory modules
63                  Add detection of AMD family 12h and 14h thermal sensors
64                  Add detection of EMC6D103S
65                  Add detection of National Semiconductor LM75A
66                  Count DMI chassis type 8 as a laptop
67                  Add detection of SMSC SCH5627
68                  Add detection of many Fintek Super-I/O devices
69
703.2.0 (2010-10-10)
71  libsensors: Increase MAX_SENSORS_PER_TYPE to 24
72              Map individual beep features
73              Change license to LGPL
74  pwmconfig: Sample all fan speeds before returning to full speed (#2380)
75             Wait for fans to return to full speed only once per PWM
76             Drop legacy invocations of cut
77  sensors.conf.default: W83667HG config is similar to W83627EHF/DHG
78  sensord: Fix support of multiple chips (#2377)
79  sensors: Properly handle sensor input read errors
80  sensors-detect: Give udev time to settle before accessing i2c nodes
81                  Add support for Intel PCH (SMBus)
82                  Add support for SMSC EMC1403 and EMC1404
83                  Fix detection of RB-C3 AMD Family 10h CPU
84                  Add support for SMSC EMC2103
85                  Add support for Fintek F71889ED
86                  Add support for ITE IT8721F
87                  Fix Maxim MAX6690 support
88                  Fix handling of duplicate detections
89                  Add support for STMicroelectronics STTS424
90                  Add support for NXP SE97 / SE97B
91                  Add reference to NCT6771F/NCT6772F/NCT6775F
92                  Add support for several JC42.4 compliant temperature sensors
93                  Add support for ITE IT8512E/F and IT8758E
94
953.1.2 (2010-02-02)
96  libsensors: Support upcoming sysfs path to i2c adapters
97              Add support for HID devices
98  fancontrol: Check that all referenced sysfs files exist
99              Check that all devices match the configuration file
100  pwmconfig: Exit immediately if not root
101             Save device paths and names in configuration file
102  sensors.conf.default: Encourage user to not modify this file
103                        Add a section for adt7473 and adt7475
104                        Add a section for adt7476 and adt7490
105  sensord: Don't name our variables "alarm"
106           Major refactoring including
107           - Cleanup of huge functions
108           - Remove needless casts
109           - Fix coding style
110           - Break long lines
111           - Make functions more robust
112           - Remove unused return value
113           - Make CGI script more XHTML compatible
114  sensors: Fix iconv-related build warning in set_degstr
115  sensors-detect: Refer to tmp401 driver if TMP411 is detected
116                  Clean up the discovery of i2c adapters
117                  Report unsupported Access Bus adapters
118                  Add detection for TI's TMP421, TMP422 and TMP423 chips
119                  The SMSC LPC47M233 isn't currently supported
120                  Support upcoming sysfs path to i2c adapters
121                  Rename the modprobe configuration file to lm_sensors.conf
122                  Only report AMD Family 10h CPU with working sensors
123                  Add detection for AMD Family 11h thermal sensors
124                  Add detection for Intel Atom thermal sensors
125                  Add detection for National Semiconductor LM73
126                  Add SMBus detection for AMD Hudson-2
127                  Add detection for Nuvoton W83667HG-B and W83677HG-I
128                  Add detection for Analog Devices ADT7490
129                  Refer to f71882fg driver if F71889FG is detected
130                  Add detecton for Fintek F71869FG
131                  Detect ADT7473 at 0x2c and 0x2d
132                  More known revisions for the ADT7476
133                  Add detection for Nuvoton W83L771AWG/ASG
134                  Add detection for VIA Nano
135                  Add detection for Texas Instruments AMC6821
136                  Add detection for Analog Devices ADT7411
137  sysconfig-lm_sensors-convert: Fix exit code
138
1393.1.1 (2009-06-21)
140  isadump: Use geteuid instead of getuid so that setuid bit works
141  isaset: Use geteuid instead of getuid so that setuid bit works
142  libsensors: Don't rely on dirent->dt_type being set
143              New method to free the memory allocated for chip names
144  Makefile: Include generated source files in dependency checking
145            Make it possible to skip building of the static library
146  fancontrol: Add support for absolute path to hwmon devices
147  sensord: Remove the hidden commandline interface
148           Introduce struct sensord_arguments
149           Using sigaction for signal handlers
150           Convert to linux coding style
151           Cleanup and refactoring of the source code
152           Don't use the system log when generating a CGI script
153           Disable unit scaling for fan speeds
154           Use daemon logging facility instead of local4 by default
155           Fix a memory leak when a chip name is provided
156  sensors: Fix a memory leak when a chip name is provided
157  sensors-detect: Add nNidia nForce MCP78S SMBus detection
158                  Display Super-I/O address even if LD is disabled
159                  Differentiate between PC8374L and WPCD377I
160                  Use dmidecode to find IPMI interfaces if available
161                  Add Nuvoton W83795G/ADG detection
162                  Add National Semiconductor LM95241 detection
163                  Add Winbond/Nuvoton W83627DHG-P and W83627UHG detection
164
1653.1.0 "Happy Birthday Lina" (2009-02-28)
166  libsensors: Add support for instantaneous power sensors
167              Add support for current sensors
168              Fix error propagation during expression evaluation
169              Detect excessive recursion depth during expression eval (#2365)
170              Return a string rather than NULL for unknown errors
171              Skip non-file sysfs entries for speed
172              Fix memory leak in scanner when using flex 2.5.9 or later
173              Report configuration file read errors
174              Exit the configuration file parser sooner
175              Free bus statements from the configuration file sooner
176              Read extra configuration files from /etc/sensors.d (#2174)
177              Report the configuration file name on parse errors
178              Add support for ACPI devices
179  libsensors.3: Reformat for clarity
180                Document function sensors_snprintf_chip_name
181                Document error-related functions
182  lm_sensors.init: Support new format of /etc/sysconfig/lm_sensors (#2246)
183                   Drop support for kernels 2.4 and earlier
184  lm_sensors.init.suse: Delete (actual SuSE script is much different)
185  Makefile: Install sensors.conf.default instead of sensors.conf.eg (#2333)
186  pwmconfig: Drop support for kernels 2.4 and earlier
187  fancontrol: Don't round temperature values
188              Drop support for kernels 2.4 and earlier
189              Exit if configuration file can't be read
190              Create pid file only after successful initialization
191  maxilife scripts: Delete (driver never ported to Linux 2.6)
192  sensord: Accept negative temperatures in RRD database
193           Don't bail out on transient errors (#2330)
194  sensors: Add support for instantaneous power sensors
195           Add support for current sensors
196           Fix exit code in error case
197  sensors.conf.5: Lots of additions and reworks
198  sensors.conf.default: New, minimum version of sensors.conf.eg (#2333)
199                        Add sections for the SMSC SCH311x and SCH5027
200  sensors.conf.eg: The LM99 offset is now handled in the lm90 driver
201                   Move help section to sensors.conf.5
202                   Add a section for the Asus/Fintek F8000
203  sensors-detect: Fix detection of ADT7463 and LM96000
204                  Add VIA VX800/VX820 SMBus support
205                  Fix detection of Intel 5000 series FB-DIMM AMB
206                  Fix detection of ADT7462
207                  Fix detection of SMSC LPC47M292
208                  Add SMSC LPC47M233 support
209                  Drop support for Linux 2.4 (#2325)
210                  Handle special case chips more efficiently
211                  Fix SMBus detection of W83627EHF and W83627DHG
212                  Get I2C adapter driver names from sysfs (#2328)
213                  Drop old SiS I2C adapter entries
214                  Drop separate LM78-J entry
215                  Merge all Mozart-2 entries
216                  Merge both GL518SM entries into one
217                  Complete GL520SM detection
218                  Improve GL525SM detection a bit
219                  Let kernel 2.6.28 and later handle chips aliases
220                  Unload kernel drivers when we are done with them (#2329)
221                  Fix handling of bus driver names with an underscore
222                  Simplify loading of bus drivers
223                  Fix bus number prediction logic (#2327)
224                  Suggest the sbs driver for smart batteries
225                  Drop alias detection for Super-I/O chips
226                  Move alias detection after all chip detections
227                  Probe chip types from safest to more risky (#2322)
228                  Add an option to skip ISA probes except IPMI
229                  Skip ISA detection by default if a Super I/O was found (#2322)
230                  Do not scan I2C adapters on multimedia cards by default
231                  Skip SMBus probing by default if a Super I/O was found (#2322)
232                  Display I2C address statictics with --stat
233                  Document the new detection order and rules
234                  Gather DMI data and print it at start-up
235                  Always probe the SMBus on Asus, Tyan and Supermicro boards
236                  Move IPMI interface detection to its own section
237                  Skip IPMI probing on laptops
238                  Add Winbond/Nuvoton W83667HG support
239                  Add Intel Core I7 support
240                  Generate new format for /etc/sysconfig/lm_sensors (#2246)
241                  Print warnings about missing modules on screen
242                  Fix detection of older DS1621
243                  Add nNidia nForce MCP67, MCP73, MCP79 SMBus support
244                  Exclude auto-loaded PCI and USB drivers from list (#2368)
245                  Special case probing i2c address 0x73 (to not crash FSC ICs)
246                  Add detection of FSC Hades and Syleus IC's
247                  Add detection of Winbond WPCD377I (no sensors)
248  sensors-detect-stat.pl: Delete (functionality merged into sensors-detect)
249  sysconfig-lm_sensors-convert: Sample config file conversion script (#2246)
250
2513.0.3 (2008-09-28)
252  libsensors: Avoid namespace pollution
253  fancontrol: Don't use named pipes when we don't need them (#2319)
254  pwmconfig: Tell the user about gnuplot if it isn't installed
255             Fix MINSTOP and MINSTART test functions (#2340)
256             Test MINSTOP before MINSTART
257             Use better step values for MINSTOP test
258             Print the revision and date at start-up
259             Detect and report obviously incorrect fan speeds
260             Determine MINSTOP automatically
261             Skip MINSTOP and MINSTART tests if fan can't stop
262             Change default for MINTEMP from 0 to 20 degrees C
263             Add support for attributes in the hwmon class device (#2260)
264             Update manual page
265  sensors.conf.eg: Drop "label temp#_crit" statements
266  sensors-detect: Add Intel SCH (bus) support
267                  Add SMSC EMC6D103 support
268                  Improve MAX6657, MAX6658, MAX6659 detection
269                  Cache the byte data reads (#2326)
270                  Add Maxim MAX6654/MAX6690 support
271                  Add National Semiconductor LM95231 support
272                  Add Analog Devices ADT7481 support
273                  Refactor alias detection functions
274                  Fix Andigilog aSC7621 support
275                  Add Texas Instruments THMC51 support
276                  Fix Analog Devices ADT7461 support
277                  Add VIA C7 support
278                  Fix Winbond W83L786NR/NG/R/G support (#2336)
279                  Add Maxim MAX6646/MAX6647/MAX6649 support
280                  Add VIA VT1212 support
281                  Add SMSC EMC2700LPC support
282                  Add ITE IT8720F support
283                  Add Texas Instruments TMP411 support
284                  Prevent misdetection of W83627DHG on I2C as LM78
285                  W83627DHG has no subclients
286                  Add Maxim MAX1618 support
287
2883.0.2 (2008-05-18)
289  documentation: Delete the FAQ, now maintained on the wiki
290  libsensors: Use __func__ instead of __FUNCTION__
291              Parse the configuration file in C locale
292              Late compute statements override early ones
293              Support virtual hwmon devices (#2309)
294              Support power and energy sensors
295              Support DOS-style configuration files again (#2284)
296  pwmconfig: Don't create the configuration file before it's needed
297             Don't preserve configuration file customizations
298             Fix permissions of the configuration file
299             Don't start if fancontrol is running (#2299)
300  fancontrol: Don't start if already running (#2299)
301              Delete fancontrol.pid at exit time (#2299)
302  sensord: Fix support of multiple chip names on the command line (#2321)
303  sensors: Print energy and power sensors with automatically scaled units
304  sensors-detect: Add SMSC SCH5027D detection
305                  Do not access I/O ports on PPC
306                  Move south bridge sensor detection to the right section
307                  Run chip_special_cases() earlier
308                  New device ID for the SMSC SCH5317
309                  Add SMSC SCH5127 detection
310                  Add National Semiconductor LM64 detection
311                  Add Asus F8000 detection
312                  Add Intel ICH10 (bus) detection
313                  Don't probe I2C addresses 0x40-0x47
314                  Fix the parsing of I2C addresses not to scan
315                  Detect and skip 1-register-only I2C devices
316                  Avoid SMBus word transactions where possible
317                  Add Dallas DS1631 detection
318
3193.0.1 (2008-01-28)
320  documentation: Update the application writing guidelines
321  libsensors: No longer depend on libsysfs (#2262)
322              Don't guess the bus type from the device ID format (#2240)
323              Add support for attributes in the hwmon class device (#2260)
324  Makefile: No warnings about ld configuration for staged installations
325            Document the variable overriding mechanism (#2296)
326  pwmconfig: Really hide errors on sysfs writes
327             Deal gracefully with read-only pwm_enable files
328             Warn about outputs found in automatic mode
329             Repeat available configuration options before prompt (#2289)
330             Fix duplicate warning message when config file is broken
331  fancontrol: Detect improperly formatted FCTEMPS value (#2293)
332  sensord: Fix rrd support (#2276)
333           Use the same colors for daily and weekly charts
334           Drop workaround needed by old versions of rrdtool
335  sensors: Fix error path on library initialization error
336  sensors.conf.eg: Fix voltage value references (g520sm, lm80, pc87366)
337  sensors-detect: Drop PCA9540 detection
338                  Improve sysconfig and modprobe.d integration
339                  Add SMSC SCH5514D-NS detection (no sensors)
340                  Lower the confidence of MAX6650/MAX6651
341                  Add Fintek F71858DG detection
342                  Add Fintek F81216D detection (no sensors)
343  unhide_ICH_SMBus: Add support for the 82801AA (ICH)
344
3453.0.0 (2007-11-24)
346  Makefile: Fix MODULE_DIR usage in etc
347            Fix build on PPC
348  pwmconfig: Better diagnostics in pwmdisable
349             Give the fans some time to spin up
350  sensors-detect: Add Texas Instruments TMP401 detection
351                  Mention the f75375s driver
352                  Add SMSC LPC47B367-NC detection (no sensors)
353                  Reduce w83781d/lm78 I2C address probing range
354                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection
355
3563.0.0-rc3 (2007-10-28)
357  libsensors: Add a default configuration file
358              Fix memory leaks on initialization error
359              Make the configuration file optional
360              Change the default configuration file to /etc/sensors3.conf
361  sensord: Reload config on SIGHUP rather than automatically
362           No default configuration file name
363  sensors: Fix file handle leak on library initialization error
364           Handle the case where voltage measurements aren't available
365           No default configuration file name
366           Install as sensors again
367  sensors.conf.eg: Install as sensors3.conf
368  sensors-detect: Fix SMSC LPC47B357/M967 detection
369                  Select the right driver for FSC chips
370  sensors-detect-stat.pl: Handle alternative chip lists
371
3723.0.0-rc2 (2007-10-10)
373  useful_addresses.html: Moved to the wiki
374  Makefile: Add sensors-conf-convert to make install
375  libsensors: Notify the caller when writing a value fails
376              Differentiate between different read error types
377              Report I/O errors as such
378  sensord: Log the error code on failure
379           Drop the configuration file search path mechanism (#2259)
380           Manual page update
381  sensors: Fix spurious critical temperature alarm
382           Print error messages to stderr
383           Make error messages more helpful and consistent
384           Better handling of the fault flags
385  sensors-conf-convert: Add a short help text
386  sensors-detect: Fix SMSC SCH311x detection
387                  Add AMD K10 CPU sensor detection
388
3893.0.0-rc1 (2007-09-25)
390  Initial release
Note: See TracBrowser for help on using the browser.