| 1 | lm-sensors CHANGES file |
|---|
| 2 | ----------------------- |
|---|
| 3 | |
|---|
| 4 | SVN HEAD |
|---|
| 5 | sensors-detect: Don't choke on systems without PCI |
|---|
| 6 | Avoid probing EDID addresses on graphics cards (#2386) |
|---|
| 7 | |
|---|
| 8 | 3.3.2 (2012-03-14) |
|---|
| 9 | libsensors: Added support for new sysfs attributes |
|---|
| 10 | Change sysfs detection to survive upcoming kernel changes |
|---|
| 11 | sensord: Fix memory leaks revealed by valgrind |
|---|
| 12 | Minor performance improvements |
|---|
| 13 | sensors: Added support for new sysfs attributes |
|---|
| 14 | Display both instantaneous and average power if available. |
|---|
| 15 | Report thermal sensor type 1 as CPU diode |
|---|
| 16 | Align power values better |
|---|
| 17 | Fix power interval output |
|---|
| 18 | fancontrol: Support setup where one PWM output controls several fans |
|---|
| 19 | Output error messages to stderr |
|---|
| 20 | sensors-detect: Stop calling for PIIX5 SMBus testers |
|---|
| 21 | Improve filtering of fake DMI data |
|---|
| 22 | Print DMI system/product version if available |
|---|
| 23 | Fix loading of the cpuid module |
|---|
| 24 | Make LM73 detection less problematic |
|---|
| 25 | Add detection of National Semiconductor LM96163 |
|---|
| 26 | Add detection of GMT G781 |
|---|
| 27 | Properly handle Super-I/O chips without logical device |
|---|
| 28 | Add detection of National Semiconductor LM96080 |
|---|
| 29 | Add detection of ITE IT8771E |
|---|
| 30 | Add detection of ITE IT8781F, IT8782F and IT8783F |
|---|
| 31 | Add detection of ITE IT8510E/TE/G, IT8511E/TE/G, |
|---|
| 32 | IT8513E/F/G, and IT8518E |
|---|
| 33 | Add detection of ST Microelectronics STTS2002 and STTS3000 |
|---|
| 34 | Add detection of IDT TSE2002GB2, TS3000GB2, Microchip MCP9804, |
|---|
| 35 | and Atmel AT30TS00 |
|---|
| 36 | |
|---|
| 37 | 3.3.1 (2011-07-21) |
|---|
| 38 | isadump: Add support for word (16-bit) and long (32-bit) reads |
|---|
| 39 | isaset: Add support for word (16-bit) and long (32-bit) writes |
|---|
| 40 | sensors.conf.default: Add a section for the EMC6W201 |
|---|
| 41 | sensors-detect: Add AMD family 15h CPU detection |
|---|
| 42 | Add detection of ADT7461A / NCT1008 |
|---|
| 43 | Add detection of ITE IT8516E/F/G |
|---|
| 44 | Integrate with systemd |
|---|
| 45 | Drop unreliable smart battery detection |
|---|
| 46 | Add detection of SMSC EMC6W201 |
|---|
| 47 | Drop unreliable detection of Maxim MAX6650 |
|---|
| 48 | Add detection of SMSC EMC2300 |
|---|
| 49 | Add detection of MAX6642 |
|---|
| 50 | Add detection of ITE IT8772E |
|---|
| 51 | Don't advertise the ipmisensors driver |
|---|
| 52 | Add detection of SA56004 |
|---|
| 53 | Add detection of LM95245 |
|---|
| 54 | |
|---|
| 55 | 3.3.0 (2011-03-28) |
|---|
| 56 | Makefile: Check for bison and flex |
|---|
| 57 | libsensors: Add support for intrusion detection (#2370) |
|---|
| 58 | Compute MAX_SUBFEATURES at run-time (#2378) |
|---|
| 59 | Compute MAX_*_SENSOR_TYPES at build time (#2378) |
|---|
| 60 | Add support for new sysfs attributes (#2379) |
|---|
| 61 | Add support for humidity sensors |
|---|
| 62 | Limit symbol visibility |
|---|
| 63 | sensors.conf.default: Add a section for the W83627THF |
|---|
| 64 | Add a section for the SCH5127 |
|---|
| 65 | Add a section for the W83627UHG |
|---|
| 66 | Add a section for the W83795G/ADG |
|---|
| 67 | Add a section for the F81865F |
|---|
| 68 | sensors: Display 3 decimal places in raw output |
|---|
| 69 | Add support for intrusion detection (#2370) |
|---|
| 70 | Fix automatic unit selection of 0 value |
|---|
| 71 | Added support for additional sensor attributes (#2379) |
|---|
| 72 | sensors-detect: Improve LM90 and W83L771 detection |
|---|
| 73 | Fix error seen if I2C bus numbers are not sequential |
|---|
| 74 | Add detection of SMSC EMC1423 |
|---|
| 75 | Add detection of the Analog Devices ADT7410 |
|---|
| 76 | Add detection of the National Semiconductor LM94 |
|---|
| 77 | Add detection of the ITE IT8728F |
|---|
| 78 | Implement universal detection for coretemp (#2381) |
|---|
| 79 | Add detection of Maxim MAX6639 |
|---|
| 80 | Add detection of SMSC EMC1023, EMC1043, EMC1053, and EMC1063 |
|---|
| 81 | Add detection of Nuvoton NCT5571D, NCT5577D and NCT6776F |
|---|
| 82 | Add detection of SMSC EMC1002, EMC1033, EMC1046, EMC1047, |
|---|
| 83 | EMC1072, EMC1073, EMC1074, EMC1402, and EMC1424 |
|---|
| 84 | Fixed address ranges checked for SMSC EMC1403 and EMC1404. |
|---|
| 85 | Fix detection of SPD EEPROM on DDR3 memory modules |
|---|
| 86 | Add detection of AMD family 12h and 14h thermal sensors |
|---|
| 87 | Add detection of EMC6D103S |
|---|
| 88 | Add detection of National Semiconductor LM75A |
|---|
| 89 | Count DMI chassis type 8 as a laptop |
|---|
| 90 | Add detection of SMSC SCH5627 |
|---|
| 91 | Add detection of many Fintek Super-I/O devices |
|---|
| 92 | |
|---|
| 93 | 3.2.0 (2010-10-10) |
|---|
| 94 | libsensors: Increase MAX_SENSORS_PER_TYPE to 24 |
|---|
| 95 | Map individual beep features |
|---|
| 96 | Change license to LGPL |
|---|
| 97 | pwmconfig: Sample all fan speeds before returning to full speed (#2380) |
|---|
| 98 | Wait for fans to return to full speed only once per PWM |
|---|
| 99 | Drop legacy invocations of cut |
|---|
| 100 | sensors.conf.default: W83667HG config is similar to W83627EHF/DHG |
|---|
| 101 | sensord: Fix support of multiple chips (#2377) |
|---|
| 102 | sensors: Properly handle sensor input read errors |
|---|
| 103 | sensors-detect: Give udev time to settle before accessing i2c nodes |
|---|
| 104 | Add support for Intel PCH (SMBus) |
|---|
| 105 | Add support for SMSC EMC1403 and EMC1404 |
|---|
| 106 | Fix detection of RB-C3 AMD Family 10h CPU |
|---|
| 107 | Add support for SMSC EMC2103 |
|---|
| 108 | Add support for Fintek F71889ED |
|---|
| 109 | Add support for ITE IT8721F |
|---|
| 110 | Fix Maxim MAX6690 support |
|---|
| 111 | Fix handling of duplicate detections |
|---|
| 112 | Add support for STMicroelectronics STTS424 |
|---|
| 113 | Add support for NXP SE97 / SE97B |
|---|
| 114 | Add reference to NCT6771F/NCT6772F/NCT6775F |
|---|
| 115 | Add support for several JC42.4 compliant temperature sensors |
|---|
| 116 | Add support for ITE IT8512E/F and IT8758E |
|---|
| 117 | |
|---|
| 118 | 3.1.2 (2010-02-02) |
|---|
| 119 | libsensors: Support upcoming sysfs path to i2c adapters |
|---|
| 120 | Add support for HID devices |
|---|
| 121 | fancontrol: Check that all referenced sysfs files exist |
|---|
| 122 | Check that all devices match the configuration file |
|---|
| 123 | pwmconfig: Exit immediately if not root |
|---|
| 124 | Save device paths and names in configuration file |
|---|
| 125 | sensors.conf.default: Encourage user to not modify this file |
|---|
| 126 | Add a section for adt7473 and adt7475 |
|---|
| 127 | Add a section for adt7476 and adt7490 |
|---|
| 128 | sensord: Don't name our variables "alarm" |
|---|
| 129 | Major refactoring including |
|---|
| 130 | - Cleanup of huge functions |
|---|
| 131 | - Remove needless casts |
|---|
| 132 | - Fix coding style |
|---|
| 133 | - Break long lines |
|---|
| 134 | - Make functions more robust |
|---|
| 135 | - Remove unused return value |
|---|
| 136 | - Make CGI script more XHTML compatible |
|---|
| 137 | sensors: Fix iconv-related build warning in set_degstr |
|---|
| 138 | sensors-detect: Refer to tmp401 driver if TMP411 is detected |
|---|
| 139 | Clean up the discovery of i2c adapters |
|---|
| 140 | Report unsupported Access Bus adapters |
|---|
| 141 | Add detection for TI's TMP421, TMP422 and TMP423 chips |
|---|
| 142 | The SMSC LPC47M233 isn't currently supported |
|---|
| 143 | Support upcoming sysfs path to i2c adapters |
|---|
| 144 | Rename the modprobe configuration file to lm_sensors.conf |
|---|
| 145 | Only report AMD Family 10h CPU with working sensors |
|---|
| 146 | Add detection for AMD Family 11h thermal sensors |
|---|
| 147 | Add detection for Intel Atom thermal sensors |
|---|
| 148 | Add detection for National Semiconductor LM73 |
|---|
| 149 | Add SMBus detection for AMD Hudson-2 |
|---|
| 150 | Add detection for Nuvoton W83667HG-B and W83677HG-I |
|---|
| 151 | Add detection for Analog Devices ADT7490 |
|---|
| 152 | Refer to f71882fg driver if F71889FG is detected |
|---|
| 153 | Add detecton for Fintek F71869FG |
|---|
| 154 | Detect ADT7473 at 0x2c and 0x2d |
|---|
| 155 | More known revisions for the ADT7476 |
|---|
| 156 | Add detection for Nuvoton W83L771AWG/ASG |
|---|
| 157 | Add detection for VIA Nano |
|---|
| 158 | Add detection for Texas Instruments AMC6821 |
|---|
| 159 | Add detection for Analog Devices ADT7411 |
|---|
| 160 | sysconfig-lm_sensors-convert: Fix exit code |
|---|
| 161 | |
|---|
| 162 | 3.1.1 (2009-06-21) |
|---|
| 163 | isadump: Use geteuid instead of getuid so that setuid bit works |
|---|
| 164 | isaset: Use geteuid instead of getuid so that setuid bit works |
|---|
| 165 | libsensors: Don't rely on dirent->dt_type being set |
|---|
| 166 | New method to free the memory allocated for chip names |
|---|
| 167 | Makefile: Include generated source files in dependency checking |
|---|
| 168 | Make it possible to skip building of the static library |
|---|
| 169 | fancontrol: Add support for absolute path to hwmon devices |
|---|
| 170 | sensord: Remove the hidden commandline interface |
|---|
| 171 | Introduce struct sensord_arguments |
|---|
| 172 | Using sigaction for signal handlers |
|---|
| 173 | Convert to linux coding style |
|---|
| 174 | Cleanup and refactoring of the source code |
|---|
| 175 | Don't use the system log when generating a CGI script |
|---|
| 176 | Disable unit scaling for fan speeds |
|---|
| 177 | Use daemon logging facility instead of local4 by default |
|---|
| 178 | Fix a memory leak when a chip name is provided |
|---|
| 179 | sensors: Fix a memory leak when a chip name is provided |
|---|
| 180 | sensors-detect: Add nNidia nForce MCP78S SMBus detection |
|---|
| 181 | Display Super-I/O address even if LD is disabled |
|---|
| 182 | Differentiate between PC8374L and WPCD377I |
|---|
| 183 | Use dmidecode to find IPMI interfaces if available |
|---|
| 184 | Add Nuvoton W83795G/ADG detection |
|---|
| 185 | Add National Semiconductor LM95241 detection |
|---|
| 186 | Add Winbond/Nuvoton W83627DHG-P and W83627UHG detection |
|---|
| 187 | |
|---|
| 188 | 3.1.0 "Happy Birthday Lina" (2009-02-28) |
|---|
| 189 | libsensors: Add support for instantaneous power sensors |
|---|
| 190 | Add support for current sensors |
|---|
| 191 | Fix error propagation during expression evaluation |
|---|
| 192 | Detect excessive recursion depth during expression eval (#2365) |
|---|
| 193 | Return a string rather than NULL for unknown errors |
|---|
| 194 | Skip non-file sysfs entries for speed |
|---|
| 195 | Fix memory leak in scanner when using flex 2.5.9 or later |
|---|
| 196 | Report configuration file read errors |
|---|
| 197 | Exit the configuration file parser sooner |
|---|
| 198 | Free bus statements from the configuration file sooner |
|---|
| 199 | Read extra configuration files from /etc/sensors.d (#2174) |
|---|
| 200 | Report the configuration file name on parse errors |
|---|
| 201 | Add support for ACPI devices |
|---|
| 202 | libsensors.3: Reformat for clarity |
|---|
| 203 | Document function sensors_snprintf_chip_name |
|---|
| 204 | Document error-related functions |
|---|
| 205 | lm_sensors.init: Support new format of /etc/sysconfig/lm_sensors (#2246) |
|---|
| 206 | Drop support for kernels 2.4 and earlier |
|---|
| 207 | lm_sensors.init.suse: Delete (actual SuSE script is much different) |
|---|
| 208 | Makefile: Install sensors.conf.default instead of sensors.conf.eg (#2333) |
|---|
| 209 | pwmconfig: Drop support for kernels 2.4 and earlier |
|---|
| 210 | fancontrol: Don't round temperature values |
|---|
| 211 | Drop support for kernels 2.4 and earlier |
|---|
| 212 | Exit if configuration file can't be read |
|---|
| 213 | Create pid file only after successful initialization |
|---|
| 214 | maxilife scripts: Delete (driver never ported to Linux 2.6) |
|---|
| 215 | sensord: Accept negative temperatures in RRD database |
|---|
| 216 | Don't bail out on transient errors (#2330) |
|---|
| 217 | sensors: Add support for instantaneous power sensors |
|---|
| 218 | Add support for current sensors |
|---|
| 219 | Fix exit code in error case |
|---|
| 220 | sensors.conf.5: Lots of additions and reworks |
|---|
| 221 | sensors.conf.default: New, minimum version of sensors.conf.eg (#2333) |
|---|
| 222 | Add sections for the SMSC SCH311x and SCH5027 |
|---|
| 223 | sensors.conf.eg: The LM99 offset is now handled in the lm90 driver |
|---|
| 224 | Move help section to sensors.conf.5 |
|---|
| 225 | Add a section for the Asus/Fintek F8000 |
|---|
| 226 | sensors-detect: Fix detection of ADT7463 and LM96000 |
|---|
| 227 | Add VIA VX800/VX820 SMBus support |
|---|
| 228 | Fix detection of Intel 5000 series FB-DIMM AMB |
|---|
| 229 | Fix detection of ADT7462 |
|---|
| 230 | Fix detection of SMSC LPC47M292 |
|---|
| 231 | Add SMSC LPC47M233 support |
|---|
| 232 | Drop support for Linux 2.4 (#2325) |
|---|
| 233 | Handle special case chips more efficiently |
|---|
| 234 | Fix SMBus detection of W83627EHF and W83627DHG |
|---|
| 235 | Get I2C adapter driver names from sysfs (#2328) |
|---|
| 236 | Drop old SiS I2C adapter entries |
|---|
| 237 | Drop separate LM78-J entry |
|---|
| 238 | Merge all Mozart-2 entries |
|---|
| 239 | Merge both GL518SM entries into one |
|---|
| 240 | Complete GL520SM detection |
|---|
| 241 | Improve GL525SM detection a bit |
|---|
| 242 | Let kernel 2.6.28 and later handle chips aliases |
|---|
| 243 | Unload kernel drivers when we are done with them (#2329) |
|---|
| 244 | Fix handling of bus driver names with an underscore |
|---|
| 245 | Simplify loading of bus drivers |
|---|
| 246 | Fix bus number prediction logic (#2327) |
|---|
| 247 | Suggest the sbs driver for smart batteries |
|---|
| 248 | Drop alias detection for Super-I/O chips |
|---|
| 249 | Move alias detection after all chip detections |
|---|
| 250 | Probe chip types from safest to more risky (#2322) |
|---|
| 251 | Add an option to skip ISA probes except IPMI |
|---|
| 252 | Skip ISA detection by default if a Super I/O was found (#2322) |
|---|
| 253 | Do not scan I2C adapters on multimedia cards by default |
|---|
| 254 | Skip SMBus probing by default if a Super I/O was found (#2322) |
|---|
| 255 | Display I2C address statictics with --stat |
|---|
| 256 | Document the new detection order and rules |
|---|
| 257 | Gather DMI data and print it at start-up |
|---|
| 258 | Always probe the SMBus on Asus, Tyan and Supermicro boards |
|---|
| 259 | Move IPMI interface detection to its own section |
|---|
| 260 | Skip IPMI probing on laptops |
|---|
| 261 | Add Winbond/Nuvoton W83667HG support |
|---|
| 262 | Add Intel Core I7 support |
|---|
| 263 | Generate new format for /etc/sysconfig/lm_sensors (#2246) |
|---|
| 264 | Print warnings about missing modules on screen |
|---|
| 265 | Fix detection of older DS1621 |
|---|
| 266 | Add nNidia nForce MCP67, MCP73, MCP79 SMBus support |
|---|
| 267 | Exclude auto-loaded PCI and USB drivers from list (#2368) |
|---|
| 268 | Special case probing i2c address 0x73 (to not crash FSC ICs) |
|---|
| 269 | Add detection of FSC Hades and Syleus IC's |
|---|
| 270 | Add detection of Winbond WPCD377I (no sensors) |
|---|
| 271 | sensors-detect-stat.pl: Delete (functionality merged into sensors-detect) |
|---|
| 272 | sysconfig-lm_sensors-convert: Sample config file conversion script (#2246) |
|---|
| 273 | |
|---|
| 274 | 3.0.3 (2008-09-28) |
|---|
| 275 | libsensors: Avoid namespace pollution |
|---|
| 276 | fancontrol: Don't use named pipes when we don't need them (#2319) |
|---|
| 277 | pwmconfig: Tell the user about gnuplot if it isn't installed |
|---|
| 278 | Fix MINSTOP and MINSTART test functions (#2340) |
|---|
| 279 | Test MINSTOP before MINSTART |
|---|
| 280 | Use better step values for MINSTOP test |
|---|
| 281 | Print the revision and date at start-up |
|---|
| 282 | Detect and report obviously incorrect fan speeds |
|---|
| 283 | Determine MINSTOP automatically |
|---|
| 284 | Skip MINSTOP and MINSTART tests if fan can't stop |
|---|
| 285 | Change default for MINTEMP from 0 to 20 degrees C |
|---|
| 286 | Add support for attributes in the hwmon class device (#2260) |
|---|
| 287 | Update manual page |
|---|
| 288 | sensors.conf.eg: Drop "label temp#_crit" statements |
|---|
| 289 | sensors-detect: Add Intel SCH (bus) support |
|---|
| 290 | Add SMSC EMC6D103 support |
|---|
| 291 | Improve MAX6657, MAX6658, MAX6659 detection |
|---|
| 292 | Cache the byte data reads (#2326) |
|---|
| 293 | Add Maxim MAX6654/MAX6690 support |
|---|
| 294 | Add National Semiconductor LM95231 support |
|---|
| 295 | Add Analog Devices ADT7481 support |
|---|
| 296 | Refactor alias detection functions |
|---|
| 297 | Fix Andigilog aSC7621 support |
|---|
| 298 | Add Texas Instruments THMC51 support |
|---|
| 299 | Fix Analog Devices ADT7461 support |
|---|
| 300 | Add VIA C7 support |
|---|
| 301 | Fix Winbond W83L786NR/NG/R/G support (#2336) |
|---|
| 302 | Add Maxim MAX6646/MAX6647/MAX6649 support |
|---|
| 303 | Add VIA VT1212 support |
|---|
| 304 | Add SMSC EMC2700LPC support |
|---|
| 305 | Add ITE IT8720F support |
|---|
| 306 | Add Texas Instruments TMP411 support |
|---|
| 307 | Prevent misdetection of W83627DHG on I2C as LM78 |
|---|
| 308 | W83627DHG has no subclients |
|---|
| 309 | Add Maxim MAX1618 support |
|---|
| 310 | |
|---|
| 311 | 3.0.2 (2008-05-18) |
|---|
| 312 | documentation: Delete the FAQ, now maintained on the wiki |
|---|
| 313 | libsensors: Use __func__ instead of __FUNCTION__ |
|---|
| 314 | Parse the configuration file in C locale |
|---|
| 315 | Late compute statements override early ones |
|---|
| 316 | Support virtual hwmon devices (#2309) |
|---|
| 317 | Support power and energy sensors |
|---|
| 318 | Support DOS-style configuration files again (#2284) |
|---|
| 319 | pwmconfig: Don't create the configuration file before it's needed |
|---|
| 320 | Don't preserve configuration file customizations |
|---|
| 321 | Fix permissions of the configuration file |
|---|
| 322 | Don't start if fancontrol is running (#2299) |
|---|
| 323 | fancontrol: Don't start if already running (#2299) |
|---|
| 324 | Delete fancontrol.pid at exit time (#2299) |
|---|
| 325 | sensord: Fix support of multiple chip names on the command line (#2321) |
|---|
| 326 | sensors: Print energy and power sensors with automatically scaled units |
|---|
| 327 | sensors-detect: Add SMSC SCH5027D detection |
|---|
| 328 | Do not access I/O ports on PPC |
|---|
| 329 | Move south bridge sensor detection to the right section |
|---|
| 330 | Run chip_special_cases() earlier |
|---|
| 331 | New device ID for the SMSC SCH5317 |
|---|
| 332 | Add SMSC SCH5127 detection |
|---|
| 333 | Add National Semiconductor LM64 detection |
|---|
| 334 | Add Asus F8000 detection |
|---|
| 335 | Add Intel ICH10 (bus) detection |
|---|
| 336 | Don't probe I2C addresses 0x40-0x47 |
|---|
| 337 | Fix the parsing of I2C addresses not to scan |
|---|
| 338 | Detect and skip 1-register-only I2C devices |
|---|
| 339 | Avoid SMBus word transactions where possible |
|---|
| 340 | Add Dallas DS1631 detection |
|---|
| 341 | |
|---|
| 342 | 3.0.1 (2008-01-28) |
|---|
| 343 | documentation: Update the application writing guidelines |
|---|
| 344 | libsensors: No longer depend on libsysfs (#2262) |
|---|
| 345 | Don't guess the bus type from the device ID format (#2240) |
|---|
| 346 | Add support for attributes in the hwmon class device (#2260) |
|---|
| 347 | Makefile: No warnings about ld configuration for staged installations |
|---|
| 348 | Document the variable overriding mechanism (#2296) |
|---|
| 349 | pwmconfig: Really hide errors on sysfs writes |
|---|
| 350 | Deal gracefully with read-only pwm_enable files |
|---|
| 351 | Warn about outputs found in automatic mode |
|---|
| 352 | Repeat available configuration options before prompt (#2289) |
|---|
| 353 | Fix duplicate warning message when config file is broken |
|---|
| 354 | fancontrol: Detect improperly formatted FCTEMPS value (#2293) |
|---|
| 355 | sensord: Fix rrd support (#2276) |
|---|
| 356 | Use the same colors for daily and weekly charts |
|---|
| 357 | Drop workaround needed by old versions of rrdtool |
|---|
| 358 | sensors: Fix error path on library initialization error |
|---|
| 359 | sensors.conf.eg: Fix voltage value references (g520sm, lm80, pc87366) |
|---|
| 360 | sensors-detect: Drop PCA9540 detection |
|---|
| 361 | Improve sysconfig and modprobe.d integration |
|---|
| 362 | Add SMSC SCH5514D-NS detection (no sensors) |
|---|
| 363 | Lower the confidence of MAX6650/MAX6651 |
|---|
| 364 | Add Fintek F71858DG detection |
|---|
| 365 | Add Fintek F81216D detection (no sensors) |
|---|
| 366 | unhide_ICH_SMBus: Add support for the 82801AA (ICH) |
|---|
| 367 | |
|---|
| 368 | 3.0.0 (2007-11-24) |
|---|
| 369 | Makefile: Fix MODULE_DIR usage in etc |
|---|
| 370 | Fix build on PPC |
|---|
| 371 | pwmconfig: Better diagnostics in pwmdisable |
|---|
| 372 | Give the fans some time to spin up |
|---|
| 373 | sensors-detect: Add Texas Instruments TMP401 detection |
|---|
| 374 | Mention the f75375s driver |
|---|
| 375 | Add SMSC LPC47B367-NC detection (no sensors) |
|---|
| 376 | Reduce w83781d/lm78 I2C address probing range |
|---|
| 377 | Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection |
|---|
| 378 | |
|---|
| 379 | 3.0.0-rc3 (2007-10-28) |
|---|
| 380 | libsensors: Add a default configuration file |
|---|
| 381 | Fix memory leaks on initialization error |
|---|
| 382 | Make the configuration file optional |
|---|
| 383 | Change the default configuration file to /etc/sensors3.conf |
|---|
| 384 | sensord: Reload config on SIGHUP rather than automatically |
|---|
| 385 | No default configuration file name |
|---|
| 386 | sensors: Fix file handle leak on library initialization error |
|---|
| 387 | Handle the case where voltage measurements aren't available |
|---|
| 388 | No default configuration file name |
|---|
| 389 | Install as sensors again |
|---|
| 390 | sensors.conf.eg: Install as sensors3.conf |
|---|
| 391 | sensors-detect: Fix SMSC LPC47B357/M967 detection |
|---|
| 392 | Select the right driver for FSC chips |
|---|
| 393 | sensors-detect-stat.pl: Handle alternative chip lists |
|---|
| 394 | |
|---|
| 395 | 3.0.0-rc2 (2007-10-10) |
|---|
| 396 | useful_addresses.html: Moved to the wiki |
|---|
| 397 | Makefile: Add sensors-conf-convert to make install |
|---|
| 398 | libsensors: Notify the caller when writing a value fails |
|---|
| 399 | Differentiate between different read error types |
|---|
| 400 | Report I/O errors as such |
|---|
| 401 | sensord: Log the error code on failure |
|---|
| 402 | Drop the configuration file search path mechanism (#2259) |
|---|
| 403 | Manual page update |
|---|
| 404 | sensors: Fix spurious critical temperature alarm |
|---|
| 405 | Print error messages to stderr |
|---|
| 406 | Make error messages more helpful and consistent |
|---|
| 407 | Better handling of the fault flags |
|---|
| 408 | sensors-conf-convert: Add a short help text |
|---|
| 409 | sensors-detect: Fix SMSC SCH311x detection |
|---|
| 410 | Add AMD K10 CPU sensor detection |
|---|
| 411 | |
|---|
| 412 | 3.0.0-rc1 (2007-09-25) |
|---|
| 413 | Initial release |
|---|
