root/lm-sensors/trunk/CHANGES @ 6045

Revision 6045, 21.6 KB (checked in by khali, 3 years ago)

libsensors: Fix warning about library path not in /etc/ld.so.conf

On recent systems, extra configuration files can live in
/etc/ld.so.conf.d, so check this directory too, before warning.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1lm-sensors CHANGES file
2-----------------------
3
4SVN HEAD
5  libsensors: Fix warning about library path not in /etc/ld.so.conf
6  sensors: Fix libiconv linkage need detection in rare corner case
7  sensors-detect: Don't choke on systems without PCI
8                  Avoid probing EDID addresses on graphics cards (#2386)
9
103.3.2 (2012-03-14)
11  libsensors: Added support for new sysfs attributes
12              Change sysfs detection to survive upcoming kernel changes
13  sensord: Fix memory leaks revealed by valgrind
14           Minor performance improvements
15  sensors: Added support for new sysfs attributes
16           Display both instantaneous and average power if available.
17           Report thermal sensor type 1 as CPU diode
18           Align power values better
19           Fix power interval output
20  fancontrol: Support setup where one PWM output controls several fans
21              Output error messages to stderr
22  sensors-detect: Stop calling for PIIX5 SMBus testers
23                  Improve filtering of fake DMI data
24                  Print DMI system/product version if available
25                  Fix loading of the cpuid module
26                  Make LM73 detection less problematic
27                  Add detection of National Semiconductor LM96163
28                  Add detection of GMT G781
29                  Properly handle Super-I/O chips without logical device
30                  Add detection of National Semiconductor LM96080
31                  Add detection of ITE IT8771E
32                  Add detection of ITE IT8781F, IT8782F and IT8783F
33                  Add detection of ITE IT8510E/TE/G, IT8511E/TE/G,
34                         IT8513E/F/G, and IT8518E
35                  Add detection of ST Microelectronics STTS2002 and STTS3000
36                  Add detection of IDT TSE2002GB2, TS3000GB2, Microchip MCP9804,
37                         and Atmel AT30TS00
38
393.3.1 (2011-07-21)
40  isadump: Add support for word (16-bit) and long (32-bit) reads
41  isaset: Add support for word (16-bit) and long (32-bit) writes
42  sensors.conf.default: Add a section for the EMC6W201
43  sensors-detect: Add AMD family 15h CPU detection
44                  Add detection of ADT7461A / NCT1008
45                  Add detection of ITE IT8516E/F/G
46                  Integrate with systemd
47                  Drop unreliable smart battery detection
48                  Add detection of SMSC EMC6W201
49                  Drop unreliable detection of Maxim MAX6650
50                  Add detection of SMSC EMC2300
51                  Add detection of MAX6642
52                  Add detection of ITE IT8772E
53                  Don't advertise the ipmisensors driver
54                  Add detection of SA56004
55                  Add detection of LM95245
56
573.3.0 (2011-03-28)
58  Makefile: Check for bison and flex
59  libsensors: Add support for intrusion detection (#2370)
60              Compute MAX_SUBFEATURES at run-time (#2378)
61              Compute MAX_*_SENSOR_TYPES at build time (#2378)
62              Add support for new sysfs attributes (#2379)
63              Add support for humidity sensors
64              Limit symbol visibility
65  sensors.conf.default: Add a section for the W83627THF
66                        Add a section for the SCH5127
67                        Add a section for the W83627UHG
68                        Add a section for the W83795G/ADG
69                        Add a section for the F81865F
70  sensors: Display 3 decimal places in raw output
71           Add support for intrusion detection (#2370)
72           Fix automatic unit selection of 0 value
73           Added support for additional sensor attributes (#2379)
74  sensors-detect: Improve LM90 and W83L771 detection
75                  Fix error seen if I2C bus numbers are not sequential
76                  Add detection of SMSC EMC1423
77                  Add detection of the Analog Devices ADT7410
78                  Add detection of the National Semiconductor LM94
79                  Add detection of the ITE IT8728F
80                  Implement universal detection for coretemp (#2381)
81                  Add detection of Maxim MAX6639
82                  Add detection of SMSC EMC1023, EMC1043, EMC1053, and EMC1063
83                  Add detection of Nuvoton NCT5571D, NCT5577D and NCT6776F
84                  Add detection of SMSC EMC1002, EMC1033, EMC1046, EMC1047,
85                        EMC1072, EMC1073, EMC1074, EMC1402, and EMC1424
86                  Fixed address ranges checked for SMSC EMC1403 and EMC1404.
87                  Fix detection of SPD EEPROM on DDR3 memory modules
88                  Add detection of AMD family 12h and 14h thermal sensors
89                  Add detection of EMC6D103S
90                  Add detection of National Semiconductor LM75A
91                  Count DMI chassis type 8 as a laptop
92                  Add detection of SMSC SCH5627
93                  Add detection of many Fintek Super-I/O devices
94
953.2.0 (2010-10-10)
96  libsensors: Increase MAX_SENSORS_PER_TYPE to 24
97              Map individual beep features
98              Change license to LGPL
99  pwmconfig: Sample all fan speeds before returning to full speed (#2380)
100             Wait for fans to return to full speed only once per PWM
101             Drop legacy invocations of cut
102  sensors.conf.default: W83667HG config is similar to W83627EHF/DHG
103  sensord: Fix support of multiple chips (#2377)
104  sensors: Properly handle sensor input read errors
105  sensors-detect: Give udev time to settle before accessing i2c nodes
106                  Add support for Intel PCH (SMBus)
107                  Add support for SMSC EMC1403 and EMC1404
108                  Fix detection of RB-C3 AMD Family 10h CPU
109                  Add support for SMSC EMC2103
110                  Add support for Fintek F71889ED
111                  Add support for ITE IT8721F
112                  Fix Maxim MAX6690 support
113                  Fix handling of duplicate detections
114                  Add support for STMicroelectronics STTS424
115                  Add support for NXP SE97 / SE97B
116                  Add reference to NCT6771F/NCT6772F/NCT6775F
117                  Add support for several JC42.4 compliant temperature sensors
118                  Add support for ITE IT8512E/F and IT8758E
119
1203.1.2 (2010-02-02)
121  libsensors: Support upcoming sysfs path to i2c adapters
122              Add support for HID devices
123  fancontrol: Check that all referenced sysfs files exist
124              Check that all devices match the configuration file
125  pwmconfig: Exit immediately if not root
126             Save device paths and names in configuration file
127  sensors.conf.default: Encourage user to not modify this file
128                        Add a section for adt7473 and adt7475
129                        Add a section for adt7476 and adt7490
130  sensord: Don't name our variables "alarm"
131           Major refactoring including
132           - Cleanup of huge functions
133           - Remove needless casts
134           - Fix coding style
135           - Break long lines
136           - Make functions more robust
137           - Remove unused return value
138           - Make CGI script more XHTML compatible
139  sensors: Fix iconv-related build warning in set_degstr
140  sensors-detect: Refer to tmp401 driver if TMP411 is detected
141                  Clean up the discovery of i2c adapters
142                  Report unsupported Access Bus adapters
143                  Add detection for TI's TMP421, TMP422 and TMP423 chips
144                  The SMSC LPC47M233 isn't currently supported
145                  Support upcoming sysfs path to i2c adapters
146                  Rename the modprobe configuration file to lm_sensors.conf
147                  Only report AMD Family 10h CPU with working sensors
148                  Add detection for AMD Family 11h thermal sensors
149                  Add detection for Intel Atom thermal sensors
150                  Add detection for National Semiconductor LM73
151                  Add SMBus detection for AMD Hudson-2
152                  Add detection for Nuvoton W83667HG-B and W83677HG-I
153                  Add detection for Analog Devices ADT7490
154                  Refer to f71882fg driver if F71889FG is detected
155                  Add detecton for Fintek F71869FG
156                  Detect ADT7473 at 0x2c and 0x2d
157                  More known revisions for the ADT7476
158                  Add detection for Nuvoton W83L771AWG/ASG
159                  Add detection for VIA Nano
160                  Add detection for Texas Instruments AMC6821
161                  Add detection for Analog Devices ADT7411
162  sysconfig-lm_sensors-convert: Fix exit code
163
1643.1.1 (2009-06-21)
165  isadump: Use geteuid instead of getuid so that setuid bit works
166  isaset: Use geteuid instead of getuid so that setuid bit works
167  libsensors: Don't rely on dirent->dt_type being set
168              New method to free the memory allocated for chip names
169  Makefile: Include generated source files in dependency checking
170            Make it possible to skip building of the static library
171  fancontrol: Add support for absolute path to hwmon devices
172  sensord: Remove the hidden commandline interface
173           Introduce struct sensord_arguments
174           Using sigaction for signal handlers
175           Convert to linux coding style
176           Cleanup and refactoring of the source code
177           Don't use the system log when generating a CGI script
178           Disable unit scaling for fan speeds
179           Use daemon logging facility instead of local4 by default
180           Fix a memory leak when a chip name is provided
181  sensors: Fix a memory leak when a chip name is provided
182  sensors-detect: Add nNidia nForce MCP78S SMBus detection
183                  Display Super-I/O address even if LD is disabled
184                  Differentiate between PC8374L and WPCD377I
185                  Use dmidecode to find IPMI interfaces if available
186                  Add Nuvoton W83795G/ADG detection
187                  Add National Semiconductor LM95241 detection
188                  Add Winbond/Nuvoton W83627DHG-P and W83627UHG detection
189
1903.1.0 "Happy Birthday Lina" (2009-02-28)
191  libsensors: Add support for instantaneous power sensors
192              Add support for current sensors
193              Fix error propagation during expression evaluation
194              Detect excessive recursion depth during expression eval (#2365)
195              Return a string rather than NULL for unknown errors
196              Skip non-file sysfs entries for speed
197              Fix memory leak in scanner when using flex 2.5.9 or later
198              Report configuration file read errors
199              Exit the configuration file parser sooner
200              Free bus statements from the configuration file sooner
201              Read extra configuration files from /etc/sensors.d (#2174)
202              Report the configuration file name on parse errors
203              Add support for ACPI devices
204  libsensors.3: Reformat for clarity
205                Document function sensors_snprintf_chip_name
206                Document error-related functions
207  lm_sensors.init: Support new format of /etc/sysconfig/lm_sensors (#2246)
208                   Drop support for kernels 2.4 and earlier
209  lm_sensors.init.suse: Delete (actual SuSE script is much different)
210  Makefile: Install sensors.conf.default instead of sensors.conf.eg (#2333)
211  pwmconfig: Drop support for kernels 2.4 and earlier
212  fancontrol: Don't round temperature values
213              Drop support for kernels 2.4 and earlier
214              Exit if configuration file can't be read
215              Create pid file only after successful initialization
216  maxilife scripts: Delete (driver never ported to Linux 2.6)
217  sensord: Accept negative temperatures in RRD database
218           Don't bail out on transient errors (#2330)
219  sensors: Add support for instantaneous power sensors
220           Add support for current sensors
221           Fix exit code in error case
222  sensors.conf.5: Lots of additions and reworks
223  sensors.conf.default: New, minimum version of sensors.conf.eg (#2333)
224                        Add sections for the SMSC SCH311x and SCH5027
225  sensors.conf.eg: The LM99 offset is now handled in the lm90 driver
226                   Move help section to sensors.conf.5
227                   Add a section for the Asus/Fintek F8000
228  sensors-detect: Fix detection of ADT7463 and LM96000
229                  Add VIA VX800/VX820 SMBus support
230                  Fix detection of Intel 5000 series FB-DIMM AMB
231                  Fix detection of ADT7462
232                  Fix detection of SMSC LPC47M292
233                  Add SMSC LPC47M233 support
234                  Drop support for Linux 2.4 (#2325)
235                  Handle special case chips more efficiently
236                  Fix SMBus detection of W83627EHF and W83627DHG
237                  Get I2C adapter driver names from sysfs (#2328)
238                  Drop old SiS I2C adapter entries
239                  Drop separate LM78-J entry
240                  Merge all Mozart-2 entries
241                  Merge both GL518SM entries into one
242                  Complete GL520SM detection
243                  Improve GL525SM detection a bit
244                  Let kernel 2.6.28 and later handle chips aliases
245                  Unload kernel drivers when we are done with them (#2329)
246                  Fix handling of bus driver names with an underscore
247                  Simplify loading of bus drivers
248                  Fix bus number prediction logic (#2327)
249                  Suggest the sbs driver for smart batteries
250                  Drop alias detection for Super-I/O chips
251                  Move alias detection after all chip detections
252                  Probe chip types from safest to more risky (#2322)
253                  Add an option to skip ISA probes except IPMI
254                  Skip ISA detection by default if a Super I/O was found (#2322)
255                  Do not scan I2C adapters on multimedia cards by default
256                  Skip SMBus probing by default if a Super I/O was found (#2322)
257                  Display I2C address statictics with --stat
258                  Document the new detection order and rules
259                  Gather DMI data and print it at start-up
260                  Always probe the SMBus on Asus, Tyan and Supermicro boards
261                  Move IPMI interface detection to its own section
262                  Skip IPMI probing on laptops
263                  Add Winbond/Nuvoton W83667HG support
264                  Add Intel Core I7 support
265                  Generate new format for /etc/sysconfig/lm_sensors (#2246)
266                  Print warnings about missing modules on screen
267                  Fix detection of older DS1621
268                  Add nNidia nForce MCP67, MCP73, MCP79 SMBus support
269                  Exclude auto-loaded PCI and USB drivers from list (#2368)
270                  Special case probing i2c address 0x73 (to not crash FSC ICs)
271                  Add detection of FSC Hades and Syleus IC's
272                  Add detection of Winbond WPCD377I (no sensors)
273  sensors-detect-stat.pl: Delete (functionality merged into sensors-detect)
274  sysconfig-lm_sensors-convert: Sample config file conversion script (#2246)
275
2763.0.3 (2008-09-28)
277  libsensors: Avoid namespace pollution
278  fancontrol: Don't use named pipes when we don't need them (#2319)
279  pwmconfig: Tell the user about gnuplot if it isn't installed
280             Fix MINSTOP and MINSTART test functions (#2340)
281             Test MINSTOP before MINSTART
282             Use better step values for MINSTOP test
283             Print the revision and date at start-up
284             Detect and report obviously incorrect fan speeds
285             Determine MINSTOP automatically
286             Skip MINSTOP and MINSTART tests if fan can't stop
287             Change default for MINTEMP from 0 to 20 degrees C
288             Add support for attributes in the hwmon class device (#2260)
289             Update manual page
290  sensors.conf.eg: Drop "label temp#_crit" statements
291  sensors-detect: Add Intel SCH (bus) support
292                  Add SMSC EMC6D103 support
293                  Improve MAX6657, MAX6658, MAX6659 detection
294                  Cache the byte data reads (#2326)
295                  Add Maxim MAX6654/MAX6690 support
296                  Add National Semiconductor LM95231 support
297                  Add Analog Devices ADT7481 support
298                  Refactor alias detection functions
299                  Fix Andigilog aSC7621 support
300                  Add Texas Instruments THMC51 support
301                  Fix Analog Devices ADT7461 support
302                  Add VIA C7 support
303                  Fix Winbond W83L786NR/NG/R/G support (#2336)
304                  Add Maxim MAX6646/MAX6647/MAX6649 support
305                  Add VIA VT1212 support
306                  Add SMSC EMC2700LPC support
307                  Add ITE IT8720F support
308                  Add Texas Instruments TMP411 support
309                  Prevent misdetection of W83627DHG on I2C as LM78
310                  W83627DHG has no subclients
311                  Add Maxim MAX1618 support
312
3133.0.2 (2008-05-18)
314  documentation: Delete the FAQ, now maintained on the wiki
315  libsensors: Use __func__ instead of __FUNCTION__
316              Parse the configuration file in C locale
317              Late compute statements override early ones
318              Support virtual hwmon devices (#2309)
319              Support power and energy sensors
320              Support DOS-style configuration files again (#2284)
321  pwmconfig: Don't create the configuration file before it's needed
322             Don't preserve configuration file customizations
323             Fix permissions of the configuration file
324             Don't start if fancontrol is running (#2299)
325  fancontrol: Don't start if already running (#2299)
326              Delete fancontrol.pid at exit time (#2299)
327  sensord: Fix support of multiple chip names on the command line (#2321)
328  sensors: Print energy and power sensors with automatically scaled units
329  sensors-detect: Add SMSC SCH5027D detection
330                  Do not access I/O ports on PPC
331                  Move south bridge sensor detection to the right section
332                  Run chip_special_cases() earlier
333                  New device ID for the SMSC SCH5317
334                  Add SMSC SCH5127 detection
335                  Add National Semiconductor LM64 detection
336                  Add Asus F8000 detection
337                  Add Intel ICH10 (bus) detection
338                  Don't probe I2C addresses 0x40-0x47
339                  Fix the parsing of I2C addresses not to scan
340                  Detect and skip 1-register-only I2C devices
341                  Avoid SMBus word transactions where possible
342                  Add Dallas DS1631 detection
343
3443.0.1 (2008-01-28)
345  documentation: Update the application writing guidelines
346  libsensors: No longer depend on libsysfs (#2262)
347              Don't guess the bus type from the device ID format (#2240)
348              Add support for attributes in the hwmon class device (#2260)
349  Makefile: No warnings about ld configuration for staged installations
350            Document the variable overriding mechanism (#2296)
351  pwmconfig: Really hide errors on sysfs writes
352             Deal gracefully with read-only pwm_enable files
353             Warn about outputs found in automatic mode
354             Repeat available configuration options before prompt (#2289)
355             Fix duplicate warning message when config file is broken
356  fancontrol: Detect improperly formatted FCTEMPS value (#2293)
357  sensord: Fix rrd support (#2276)
358           Use the same colors for daily and weekly charts
359           Drop workaround needed by old versions of rrdtool
360  sensors: Fix error path on library initialization error
361  sensors.conf.eg: Fix voltage value references (g520sm, lm80, pc87366)
362  sensors-detect: Drop PCA9540 detection
363                  Improve sysconfig and modprobe.d integration
364                  Add SMSC SCH5514D-NS detection (no sensors)
365                  Lower the confidence of MAX6650/MAX6651
366                  Add Fintek F71858DG detection
367                  Add Fintek F81216D detection (no sensors)
368  unhide_ICH_SMBus: Add support for the 82801AA (ICH)
369
3703.0.0 (2007-11-24)
371  Makefile: Fix MODULE_DIR usage in etc
372            Fix build on PPC
373  pwmconfig: Better diagnostics in pwmdisable
374             Give the fans some time to spin up
375  sensors-detect: Add Texas Instruments TMP401 detection
376                  Mention the f75375s driver
377                  Add SMSC LPC47B367-NC detection (no sensors)
378                  Reduce w83781d/lm78 I2C address probing range
379                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection
380
3813.0.0-rc3 (2007-10-28)
382  libsensors: Add a default configuration file
383              Fix memory leaks on initialization error
384              Make the configuration file optional
385              Change the default configuration file to /etc/sensors3.conf
386  sensord: Reload config on SIGHUP rather than automatically
387           No default configuration file name
388  sensors: Fix file handle leak on library initialization error
389           Handle the case where voltage measurements aren't available
390           No default configuration file name
391           Install as sensors again
392  sensors.conf.eg: Install as sensors3.conf
393  sensors-detect: Fix SMSC LPC47B357/M967 detection
394                  Select the right driver for FSC chips
395  sensors-detect-stat.pl: Handle alternative chip lists
396
3973.0.0-rc2 (2007-10-10)
398  useful_addresses.html: Moved to the wiki
399  Makefile: Add sensors-conf-convert to make install
400  libsensors: Notify the caller when writing a value fails
401              Differentiate between different read error types
402              Report I/O errors as such
403  sensord: Log the error code on failure
404           Drop the configuration file search path mechanism (#2259)
405           Manual page update
406  sensors: Fix spurious critical temperature alarm
407           Print error messages to stderr
408           Make error messages more helpful and consistent
409           Better handling of the fault flags
410  sensors-conf-convert: Add a short help text
411  sensors-detect: Fix SMSC SCH311x detection
412                  Add AMD K10 CPU sensor detection
413
4143.0.0-rc1 (2007-09-25)
415  Initial release
Note: See TracBrowser for help on using the browser.