root/lm-sensors/trunk/etc/sensors.conf.default @ 5889

Revision 5889, 8.9 KB (checked in by khali, 4 years ago)

Add a default configuration section for the SMSC SCH5127.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
Line 
1# libsensors configuration file
2# -----------------------------
3#
4# This default configuration file only includes statements which do not
5# differ from one mainboard to the next. Only label, compute and set
6# statements for internal voltage and temperature sensors are included.
7#
8# In general, local changes should not be added to this file, but rather
9# placed in custom configuration files located in /etc/sensors.d. This
10# approach makes further updates much easier.
11#
12# Such custom configuration files for specific mainboards can be found at
13# http://www.lm-sensors.org/wiki/Configurations
14
15chip "lm78-*" "lm79-*" "lm80-*"
16
17    label temp1 "M/B Temp"
18
19
20chip "w83792d-*"
21
22    label in0 "VcoreA"
23    label in1 "VcoreB"
24    label in6 "+5V"
25    label in7 "5VSB"
26    label in8 "Vbat"
27
28    set in6_min  5.0 * 0.90
29    set in6_max  5.0 * 1.10
30    set in7_min  5.0 * 0.90
31    set in7_max  5.0 * 1.10
32    set in8_min  3.0 * 0.90
33    set in8_max  3.0 * 1.10
34
35
36chip "w83793-*"
37
38    label in0 "VcoreA"
39    label in1 "VcoreB"
40    label in7 "+5V"
41    label in8 "5VSB"
42    label in9 "Vbat"
43
44    set in7_min  5.0 * 0.90
45    set in7_max  5.0 * 1.10
46    set in8_min  5.0 * 0.90
47    set in8_max  5.0 * 1.10
48    set in9_min  3.0 * 0.90
49    set in9_max  3.0 * 1.10
50
51
52chip "via686a-*"
53
54    label in0 "Vcore"
55    label in2 "+3.3V"
56    label in3 "+5V"
57    label in4 "+12V"
58
59    set in2_min  3.3 * 0.90
60    set in2_max  3.3 * 1.10
61    set in3_min  5.0 * 0.90
62    set in3_max  5.0 * 1.10
63    set in4_min 12.0 * 0.90
64    set in4_max 12.0 * 1.10
65
66
67chip "adm1025-*" "ne1619-*"
68
69    label in1 "Vcore"
70    label in2 "+3.3V"
71    label in3 "+5V"
72    label in4 "+12V"
73    label in5 "VCC"
74
75    set in2_min  3.3 * 0.90
76    set in2_max  3.3 * 1.10
77    set in3_min  5.0 * 0.90
78    set in3_max  5.0 * 1.10
79    set in5_min  3.3 * 0.90
80    set in5_max  3.3 * 1.10
81# Depending on how your chip is hardwired, you may or may not have
82# +12V readings.
83#    set in4_min 12.0 * 0.90
84#    set in4_max 12.0 * 1.10
85
86    label temp1 "CPU Temp"
87    label temp2 "M/B Temp"
88
89
90chip "lm87-*" "adm1024-*"
91
92    label in1 "Vcore"
93    label in2 "+3.3V"
94    label in3 "+5V"
95    label in4 "+12V"
96
97    set in2_min  3.3 * 0.90
98    set in2_max  3.3 * 1.10
99    set in3_min  5.0 * 0.90
100    set in3_max  5.0 * 1.10
101    set in4_min 12.0 * 0.90
102    set in4_max 12.0 * 1.10
103
104    label temp1 "M/B Temp"
105    label temp2 "CPU Temp"
106
107
108chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*"
109
110    label in8 "Vbat"
111
112
113chip "fscpos-*" "fscher-*"
114#FSC "Hermes"
115
116    label in0 "+12V"
117    label in1 "+5V"
118    label in2 "Vbat"
119
120    label temp1 "CPU Temp"
121    label temp2 "M/B Temp"
122    label temp3 "Aux Temp"
123
124
125chip "fscscy-*"
126#FSC "Scylla"
127
128    label in0 "+12V"
129    label in1 "+5V"
130    label in2 "+3.3V"
131
132    label temp1 "CPU0 Temp"
133    label temp2 "CPU1 Temp"
134    label temp3 "M/B Temp"
135    label temp4 "Aux Temp"
136
137
138chip "fschds-*"
139# Fujitsu Technology Solutions, "Hades"-Chip
140
141# Temperatures
142    label temp1 "CPU Temp"
143    label temp2 "Super I/O Temp"
144    label temp3 "System Temp"
145
146# Fans
147    label fan1 "PSU Fan"
148    label fan2 "CPU Fan"
149    label fan3 "System FAN2"
150    label fan4 "System FAN3"
151    label fan5 "System FAN4"
152
153# Voltages
154    label in0 "+12V"
155    label in1 "+5V"
156    label in2 "Vbat"
157
158chip "fscsyl-*"
159# Fujitsu Technology Solutions, "Syleus"-Chip
160
161# Temperatures
162    label temp1 "CPU Temp"
163    label temp4 "Super I/O Temp"
164    label temp5 "Northbridge Temp"
165
166# Fans
167    label fan1 "CPU Fan"
168    label fan2 "System FAN2"
169    label fan3 "System FAN3"
170    label fan4 "System FAN4"
171    label fan7 "PSU Fan"
172
173# Voltages
174    label in0 "+12V"
175    label in1 "+5V"
176    label in2 "Vbat"
177    label in3 "+3.3V"
178    label in5 "+3.3V-Aux"
179
180chip "vt1211-*"
181
182    label in5 "+3.3V"
183
184    label temp2 "SIO Temp"
185
186
187chip "vt8231-*"
188
189    label in5 "+3.3V"
190
191
192chip "smsc47m192-*"
193
194    label in1 "Vcore"
195    label in2 "+3.3V"
196    label in3 "+5V"
197    label in4 "+12V"
198    label in5 "VCC"
199
200    set in2_min  3.3 * 0.90
201    set in2_max  3.3 * 1.10
202    set in3_min  5.0 * 0.90
203    set in3_max  5.0 * 1.10
204    set in4_min 12.0 * 0.90
205    set in4_max 12.0 * 1.10
206    set in5_min  3.3 * 0.90
207    set in5_max  3.3 * 1.10
208
209    label temp1 "SIO Temp"
210
211
212chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" "emc6d100-*" "emc6d102-*"
213
214    label in1 "Vcore"
215    label in2 "+3.3V"
216    label in3 "+5V"
217    label in4 "+12V"
218
219    set in2_min  3.3 * 0.90
220    set in2_max  3.3 * 1.10
221    set in3_min  5.0 * 0.90
222    set in3_max  5.0 * 1.10
223# Depending on how your chip is hardwired, you may or may not have
224# +12V readings.
225#    set in4_min 12.0 * 0.90
226#    set in4_max 12.0 * 1.10
227
228    label temp2 "M/B Temp"
229
230
231chip "pc87365-*" "pc87366-*"
232
233# Voltage inputs
234
235    label in7 "3VSB"
236    label in8 "VDD"
237    label in9 "Vbat"
238    label in10 "AVDD"
239
240    compute in7   @*2, @/2
241    compute in8   @*2, @/2
242    compute in10  @*2, @/2
243
244# These are the operating conditions as recommended by National
245# Semiconductor
246    set in7_min   3.0
247    set in7_max   3.6
248    set in8_min   3.0
249    set in8_max   3.6
250    set in10_min  3.0
251    set in10_max  3.6
252# Depending on the hardware setup, the battery voltage may or may not
253# be monitored.
254#    set in9_min   2.4
255#    set in9_max   3.6
256
257    label temp3 "SIO Temp"
258
259    set temp3_min    0
260    set temp3_max   70
261    set temp3_crit  85
262
263
264chip "adm1030-*" "adm1031-*"
265
266    label temp1 "M/B Temp"
267
268
269chip "w83627thf-*"
270
271    label in3 "+5V"
272    label in7 "5VSB"
273    label in8 "Vbat"
274
275    # Internal resistors
276    compute in3  @ * (1 + 34/51), @ / (1 + 34/51)
277    compute in7  @ * (1 + 34/51), @ / (1 + 34/51)
278
279    set in3_min  5.0 * 0.90
280    set in3_max  5.0 * 1.10
281    set in7_min  5.0 * 0.90
282    set in7_max  5.0 * 1.10
283# The battery voltage may or may not be monitored.
284#    set in8_min  3.0 * 0.90
285#    set in8_max  3.0 * 1.10
286
287
288chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*"
289
290    label in0 "Vcore"
291    label in2 "AVCC"
292    label in3 "+3.3V"
293    label in7 "3VSB"
294    label in8 "Vbat"
295
296    set in2_min  3.3 * 0.90
297    set in2_max  3.3 * 1.10
298    set in3_min  3.3 * 0.90
299    set in3_max  3.3 * 1.10
300    set in7_min  3.3 * 0.90
301    set in7_max  3.3 * 1.10
302    set in8_min  3.0 * 0.90
303    set in8_max  3.0 * 1.10
304
305
306chip "f71805f-*"
307
308    label in0 "+3.3V"
309
310    set in0_min  3.3 * 0.90
311    set in0_max  3.3 * 1.10
312
313
314chip "f71872f-*"
315
316    label in0 "+3.3V"
317    label in9 "Vbat"
318    label in10 "3VSB"
319
320    set in0_min   3.3 * 0.90
321    set in0_max   3.3 * 1.10
322    set in9_min   3.0 * 0.90
323    set in9_max   3.0 * 1.10
324    set in10_min  3.3 * 0.90
325    set in10_max  3.3 * 1.10
326
327
328chip "k8temp-*"
329
330    label temp1 "Core0 Temp"
331    label temp2 "Core0 Temp"
332    label temp3 "Core1 Temp"
333    label temp4 "Core1 Temp"
334
335
336chip "dme1737-*"
337
338    label in0 "5VSB"
339    label in1 "Vcore"
340    label in2 "+3.3V"
341    label in3 "+5V"
342    label in4 "+12V"
343    label in5 "3VSB"
344    label in6 "Vbat"
345
346    label temp2 "SIO Temp"
347
348    set in0_min  5.0 * 0.90
349    set in0_max  5.0 * 1.10
350    set in2_min  3.3 * 0.90
351    set in2_max  3.3 * 1.10
352    set in3_min  5.0 * 0.90
353    set in3_max  5.0 * 1.10
354    set in4_min 12.0 * 0.90
355    set in4_max 12.0 * 1.10
356    set in5_min  3.3 * 0.90
357    set in5_max  3.3 * 1.10
358    set in6_min  3.0 * 0.90
359    set in6_max  3.0 * 1.10
360
361
362chip "sch311x-*"
363
364    label in1 "Vcore"
365    label in2 "+3.3V"
366    label in3 "+5V"
367    label in4 "+12V"
368    label in5 "3VSB"
369    label in6 "Vbat"
370
371    label temp2 "SIO Temp"
372
373    set in2_min  3.3 * 0.90
374    set in2_max  3.3 * 1.10
375    set in3_min  5.0 * 0.90
376    set in3_max  5.0 * 1.10
377    set in4_min 12.0 * 0.90
378    set in4_max 12.0 * 1.10
379    set in5_min  3.3 * 0.90
380    set in5_max  3.3 * 1.10
381    set in6_min  3.0 * 0.90
382    set in6_max  3.0 * 1.10
383
384
385chip "sch5027-*"
386
387    label in0 "5VSB"
388    label in1 "Vcore"
389    label in2 "+3.3V"
390    label in5 "3VSB"
391    label in6 "Vbat"
392
393    label temp2 "SIO Temp"
394
395    set in0_min  5.0 * 0.90
396    set in0_max  5.0 * 1.10
397    set in2_min  3.3 * 0.90
398    set in2_max  3.3 * 1.10
399    set in5_min  3.3 * 0.90
400    set in5_max  3.3 * 1.10
401    set in6_min  3.0 * 0.90
402    set in6_max  3.0 * 1.10
403
404
405chip "sch5127-*"
406
407    label in2 "+3.3V"
408    label in5 "3VSB"
409    label in6 "Vbat"
410
411    set in2_min  3.3 * 0.90
412    set in2_max  3.3 * 1.10
413    set in5_min  3.3 * 0.90
414    set in5_max  3.3 * 1.10
415    set in6_min  3.0 * 0.90
416    set in6_max  3.0 * 1.10
417
418
419chip "f71882fg-*"
420
421    label in0 "+3.3V"
422    label in7 "3VSB"
423    label in8 "Vbat"
424
425    compute in0  @*2, @/2
426    compute in7  @*2, @/2
427    compute in8  @*2, @/2
428
429
430chip "f8000-*"
431
432    label in0 "+3.3V"
433    label in1 "3VSB"
434    label in2 "Vbat"
435
436    compute in0  @*2, @/2
437    compute in1  @*2, @/2
438    compute in2  @*2, @/2
439
440
441chip "adt7473-*" "adt7475-*"
442
443    label in2 "+3.3V"
444
445    set in2_min  3.3 * 0.90
446    set in2_max  3.3 * 1.10
447
448    label temp2 "Board Temp"
449
450
451chip "adt7476-*" "adt7490-*"
452
453    label in1 "Vcore"
454    label in2 "+3.3V"
455    label in3 "+5V"
456    label in4 "+12V"
457
458    set in2_min  3.3 * 0.90
459    set in2_max  3.3 * 1.10
460    set in3_min  5.0 * 0.90
461    set in3_max  5.0 * 1.10
462# Depending on how your ADT7476 is hardwired, you may or may not have
463# +12V readings.
464#    set in4_min 12.0 * 0.90
465#    set in4_max 12.0 * 1.10
466
467    label temp2 "M/B Temp"
Note: See TracBrowser for help on using the browser.