Changeset 2545

Timestamp:

05/17/04 21:02:47 (9 years ago)

Author:

khali

Message:

Support pc87366 thermistor inputs.

Location:

lm-sensors/trunk

Files:

• etc/sensors.conf.eg (modified) (3 diffs)
• lib/chips.h (modified) (1 diff)

lm-sensors/trunk/etc/sensors.conf.eg

@@ -2085 +2085 @@
 
 # On some systems, thermistors are used instead of these thermal diodes
-# (thermistors are not yet supported by the driver)
 #   ignore temp1
 #   ignore temp2
@@ -2099 +2098 @@
    set temp3_crit  85
 
+# Thermistors
+# 3435 is the thermistor beta.
+# This assumes that the thermistor forms a resistor divider with a resistor
+# equal to its nominal value at 25 degres Celcius. If not, change the values.
+# We also assume that you have a working in10 (which is forcibly enabled by
+# default). If not, use 3.3 instead, but you lose accuracy.
+
+   compute temp4  3435 / (` (1 / (1 - @ / in10) - 1) + 3435 / 298.15) - 273.15, \
+                  in10 * (1 - 1 / (1 + (^ (3435 / (273.15 + @) - 3435 / 298.15))))
+   compute temp5  3435 / (` (1 / (1 - @ / in10) - 1) + 3435 / 298.15) - 273.15, \
+                  in10 * (1 - 1 / (1 + (^ (3435 / (273.15 + @) - 3435 / 298.15))))
+   compute temp6  3435 / (` (1 / (1 - @ / in10) - 1) + 3435 / 298.15) - 273.15, \
+                  in10 * (1 - 1 / (1 + (^ (3435 / (273.15 + @) - 3435 / 298.15))))
+
+   set temp4_min    0
+   set temp4_max   70
+   set temp4_crit  85
+   set temp5_min    0
+   set temp5_max   70
+   set temp5_crit  85
+   set temp6_min    0
+   set temp6_max   70
+   set temp6_crit  85
+
 # Fan inputs
 
@@ -2105 +2128 @@
 #   ignore fan3
 
-# Increase clock dividers if you have very low speed fans and readings
-# overflow
-#   set fan1_div 8
-#   set fan2_div 8
-#   set fan3_div 8
-
    set fan1_min 2000
    set fan2_min 2000

lm-sensors/trunk/lib/chips.h

@@ -1690 +1690 @@
 #define SENSORS_PC87360_TEMP2           172     /* R */
 #define SENSORS_PC87360_TEMP3           173     /* R */
+#define SENSORS_PC87360_TEMP4           174     /* R */
+#define SENSORS_PC87360_TEMP5           175     /* R */
+#define SENSORS_PC87360_TEMP6           176     /* R */
 #define SENSORS_PC87360_TEMP1_MIN       181     /* RW */
 #define SENSORS_PC87360_TEMP2_MIN       182     /* RW */
 #define SENSORS_PC87360_TEMP3_MIN       183     /* RW */
+#define SENSORS_PC87360_TEMP4_MIN       184     /* RW */
+#define SENSORS_PC87360_TEMP5_MIN       185     /* RW */
+#define SENSORS_PC87360_TEMP6_MIN       186     /* RW */
 #define SENSORS_PC87360_TEMP1_MAX       191     /* RW */
 #define SENSORS_PC87360_TEMP2_MAX       192     /* RW */
 #define SENSORS_PC87360_TEMP3_MAX       193     /* RW */
+#define SENSORS_PC87360_TEMP4_MAX       194     /* RW */
+#define SENSORS_PC87360_TEMP5_MAX       195     /* RW */
+#define SENSORS_PC87360_TEMP6_MAX       196     /* RW */
 #define SENSORS_PC87360_TEMP1_CRIT      201     /* RW */
 #define SENSORS_PC87360_TEMP2_CRIT      202     /* RW */
 #define SENSORS_PC87360_TEMP3_CRIT      203     /* RW */
+#define SENSORS_PC87360_TEMP4_CRIT      204     /* RW */
+#define SENSORS_PC87360_TEMP5_CRIT      205     /* RW */
+#define SENSORS_PC87360_TEMP6_CRIT      206     /* RW */
 #define SENSORS_PC87360_TEMP1_STATUS    211     /* R */
 #define SENSORS_PC87360_TEMP2_STATUS    212     /* R */
 #define SENSORS_PC87360_TEMP3_STATUS    213     /* R */
+#define SENSORS_PC87360_TEMP4_STATUS    214     /* R */
+#define SENSORS_PC87360_TEMP5_STATUS    215     /* R */
+#define SENSORS_PC87360_TEMP6_STATUS    216     /* R */
 
 #define SENSORS_LM92_PREFIX "lm92"