Changeset 3282

Timestamp:

04/04/06 19:13:32 (7 years ago)

Author:

khali

Message:

Add detection of more Fintek chips:
* F75373S/SG
* F75383S/M
* F75384S/M
* custom power control chip at SMBus 0x2f

Files:

• lm-sensors/trunk/prog/detect/sensors-detect (modified) (4 diffs)

lm-sensors/trunk/prog/detect/sensors-detect

@@ -1513 +1513 @@
      },
      {
+       name => "Fintek F75373S/SG",
+       driver => "to-be-written",
+       i2c_addrs => [0x2d..0x2e],
+       i2c_detect => sub { fintek_detect 3, @_ },
+     },
+     {
        name => "Fintek F75375S/SP",
        driver => "to-be-written",
@@ -1523 +1529 @@
        i2c_addrs => [0x2d..0x2e],
        i2c_detect => sub { fintek_detect 5, @_ },
+     },
+     {
+       name => "Fintek F75383S/M",
+       driver => "to-be-written",
+       i2c_addrs => [0x4c],
+       i2c_detect => sub { fintek_detect 6, @_ },
+     },
+     {
+       name => "Fintek F75384S/M",
+       driver => "to-be-written",
+       i2c_addrs => [0x4d],
+       i2c_detect => sub { fintek_detect 6, @_ },
+     },
+     {
+       name => "Fintek custom power control IC",
+       driver => "to-be-written",
+       i2c_addrs => [0x2f],
+       i2c_detect => sub { fintek_detect 7, @_ },
      },
      {
@@ -4525 +4549 @@
 
 # $_[0]: Chip to detect
-#   (1 = F75111R/RG/N, 2 = F75121R/F75122R/RG, 4 = F75375S/SG,
-#    5 = F75387SG/RG)
+#   (1 = F75111R/RG/N, 2 = F75121R/F75122R/RG, 3 = F75373S/SG,
+#    4 = F75375S/SP, 5 = F75387SG/RG, 6 = F75383M/S/F75384M/S,
+#    7 = custom power control IC)
 # $_[1]: A reference to the file descriptor to access this chip.
 #        We assume an i2c_set_slave_addr was already done.
@@ -4548 +4573 @@
   } elsif ($chip == 2) { # F75121R/F75122R/RG
     return unless $chipid == 0x0301;
-  } elsif ($chip == 4) { # F75375S/SG
+  } elsif ($chip == 3) { # F75373S/SG
+    return unless $chipid == 0x0204;
+  } elsif ($chip == 4) { # F75375S/SP
     return unless $chipid == 0x0306;
   } elsif ($chip == 5) { # F75387SG/RG
     return unless $chipid == 0x0410;
+  } elsif ($chip == 6) { # F75383M/S/F75384M/S
+    # The datasheet has 0x0303, but Fintek say 0x0413 is also possible
+    return unless $chipid == 0x0303 || $chipid == 0x0413;
+  } elsif ($chip == 7) { # custom power control IC
+    return unless $chipid == 0x0302;
   }