| | 1 | Kernel driver `w83781d.o' |
| | 2 | ========================= |
| | 3 | |
| | 4 | Status: W83781D support is complete and well-tested, others are mostly complete |
| | 5 | and somewhat tested. |
| | 6 | |
| | 7 | Supported chips: |
| | 8 | * Winbond W83781D |
| | 9 | Prefix 'w83781d' |
| | 10 | Addresses scanned: I2C 0x20 - 0x2f (inclusive), ISA 0x290 (8 I/O ports) |
| | 11 | Datasheet: Publicly available at the Winbond website |
| | 12 | * Winbond W83782D |
| | 13 | Prefix 'w83782d' |
| | 14 | Addresses scanned: I2C 0x20 - 0x2f (inclusive), ISA 0x290 (8 I/O ports) |
| | 15 | Datasheet: Available on request from Winbond |
| | 16 | * Winbond W83783S |
| | 17 | Prefix 'w83783s' |
| | 18 | Addresses scanned: I2C 0x20 - 0x2f (inclusive) |
| | 19 | Datasheet: Available on request from Winbond |
| | 20 | |
| | 21 | |
| | 22 | Author: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, |
| | 23 | and Mark Studebaker <mds@eng.paradyne.com> |
| | 24 | |
| | 25 | |
| | 26 | Module Parameters |
| | 27 | ----------------- |
| | 28 | |
| | 29 | * force: short array (min = 1, max = 48) |
| | 30 | List of adapter,address pairs to boldly assume to be present |
| | 31 | * force_w83781d: short array (min = 1, max = 48) |
| | 32 | List of adapter,address pairs which are unquestionably assumed to contain |
| | 33 | a `w83781d' chip |
| | 34 | * force_w83782d: short array (min = 1, max = 48) |
| | 35 | List of adapter,address pairs which are unquestionably assumed to contain |
| | 36 | a `w83782d' chip |
| | 37 | * force_w83783s: short array (min = 1, max = 48) |
| | 38 | List of adapter,address pairs which are unquestionably assumed to contain |
| | 39 | a `w83783s' chip |
| | 40 | * ignore: short array (min = 1, max = 48) |
| | 41 | List of adapter,address pairs not to scan |
| | 42 | * ignore_range: short array (min = 1, max = 48) |
| | 43 | List of adapter,start-addr,end-addr triples not to scan |
| | 44 | * probe: short array (min = 1, max = 48) |
| | 45 | List of adapter,address pairs to scan additionally |
| | 46 | * probe_range: short array (min = 1, max = 48) |
| | 47 | List of adapter,start-addr,end-addr triples to scan additionally |
| | 48 | |
| | 49 | |
| | 50 | Description |
| | 51 | ----------- |
| | 52 | |
| | 53 | This driver implements support for the Winbond W83781D, W83782D and W83783S. |
| | 54 | We will refer to them collectively as W8378* chips. |
| | 55 | |
| | 56 | There is quite some difference between these chips, but they are similar |
| | 57 | enough that it was sensible to put them together in one driver. |
| | 58 | |
| | 59 | Detection of these chips can sometimes be foiled because they can be in |
| | 60 | an internal state that allows no clean access. If you know the address |
| | 61 | of the chip, use a 'force' parameter; this will put them into a more |
| | 62 | well-behaved state first. |
| | 63 | |
| | 64 | The W8378* implements temperature sensors (three on the W83781D and W83782D, |
| | 65 | two on the W83783S), three FAN rotation speed sensors, voltage sensors |
| | 66 | (seven on the W83781D, nine on the W83782D and six on the W83783S), VID |
| | 67 | lines, alarms with beep warnings, and some miscellaneous stuff. |
| | 68 | |
| | 69 | Temperatures are measured in degrees Celcius. There is always one main |
| | 70 | temperature sensor, and one (W83783S) or two (W83781D and W83782D) other |
| | 71 | sensors. An alarm is triggered for the main sensor once when the |
| | 72 | Overtemperature Shutdown limit is crossed; it is triggered again as soon as |
| | 73 | it drops below the Hysteris value. A more useful behaviour |
| | 74 | can be found by setting the Hysteris value to +127 degrees Celcius; in |
| | 75 | this case, alarms are issued during all the time when the actual temperature |
| | 76 | is above the Overtemperature Shutdown value. For the other sensor(s), an |
| | 77 | alarm is triggered when the temperature gets higher then the Overtemperature |
| | 78 | Shutdown value; it stays on until the temperature falls below the Hysteris |
| | 79 | value. But on the W83781D, there is only one alarm that functions for both |
| | 80 | other sensors! Temperatures are guaranteed within a range of -55 to +125 |
| | 81 | degrees. The main temperature sensors has a resolution of 1 degree; the other |
| | 82 | sensor(s) of 0.5 degree. |
| | 83 | |
| | 84 | FAN rotation speeds are reported in RPM (rotations per minute). An alarm is |
| | 85 | triggered if the rotation speed has dropped below a programmable limit. FAN |
| | 86 | readings can be divided by a programmable divider (1, 2, 4 or 8 for the |
| | 87 | W83781D; 1, 2, 4, 8, 16, 32, 64 or 128 for the W83782D and W83783S) to give |
| | 88 | the readings more range or accuracy. This is important because some FANs |
| | 89 | report only one 'tick' each rotation, while others report two - making |
| | 90 | all readings twice as high. Not all RPM values can accurately be represented, |
| | 91 | so some rounding is done. With a divider of 2, the lowest representable |
| | 92 | value is around 2600 RPM. |
| | 93 | |
| | 94 | Voltage sensors (also known as IN sensors) report their values in volts. |
| | 95 | An alarm is triggered if the voltage has crossed a programmable minimum |
| | 96 | or maximum limit. Note that minimum in this case always means 'closest to |
| | 97 | zero'; this is important for negative voltage measurements. All voltage |
| | 98 | inputs can measure voltages between 0 and 4.08 volts, with a resolution |
| | 99 | of 0.016 volt. |
| | 100 | |
| | 101 | The VID lines encode the core voltage value: the voltage level your processor |
| | 102 | should work with. This is hardcoded by the mainboard and/or processor itself. |
| | 103 | It is a value in volts. When it is unconnected, you will often find the |
| | 104 | value 3.50 V here. |
| | 105 | |
| | 106 | The W83782D and W83783S temperature conversion machine understands about |
| | 107 | several kinds of temperature probes. You can program the so-called |
| | 108 | beta value in the sensor files. '1' is the PII/Celeron diode, '2' is the |
| | 109 | TN3904 transistor, and 3435 the default thermistor value. Other values |
| | 110 | are (not yet) supported. You can program your own values through the |
| | 111 | rt interface, but this is not very useful, because these tables are |
| | 112 | under NDA. |
| | 113 | |
| | 114 | In addition to the alarms described above, there is a CHAS alarm on the |
| | 115 | W83781D and W83782D which triggers if your computer case is open. |
| | 116 | |
| | 117 | When an alarm goes off, you can be warned by a beeping signal through |
| | 118 | your computer speaker. It is possible to enable all beeping globally, |
| | 119 | or only the beeping for some alarms. |
| | 120 | |
| | 121 | If an alarm triggers, it will remain triggered until the hardware register |
| | 122 | is read at least once. This means that the cause for the alarm may |
| | 123 | already have disappeared! Note that in the current implementation, all |
| | 124 | hardware registers are read whenever any data is read (unless it is less |
| | 125 | than 1.5 seconds since the last update). This means that you can easily |
| | 126 | miss once-only alarms. |
| | 127 | |
| | 128 | The W8378* only updates its values each 1.5 seconds; reading it more often |
| | 129 | will do no harm, but will return 'old' values. |
| | 130 | |
| | 131 | |
| | 132 | Chip Features |
| | 133 | ------------- |
| | 134 | |
| | 135 | Chip `w83781d' |
| | 136 | LABEL LABEL CLASS COMPUTE CLASS ACCESS MAGNITUDE |
| | 137 | in0 NONE NONE R 2 |
| | 138 | in1 NONE NONE R 2 |
| | 139 | in2 NONE NONE R 2 |
| | 140 | in3 NONE NONE R 2 |
| | 141 | in4 NONE NONE R 2 |
| | 142 | in5 NONE NONE R 2 |
| | 143 | in6 NONE NONE R 2 |
| | 144 | in0_min in0 in0 RW 2 |
| | 145 | in1_min in1 in1 RW 2 |
| | 146 | in2_min in2 in2 RW 2 |
| | 147 | in3_min in3 in3 RW 2 |
| | 148 | in4_min in4 in4 RW 2 |
| | 149 | in5_min in5 in5 RW 2 |
| | 150 | in6_min in6 in6 RW 2 |
| | 151 | in0_max in0 in0 RW 2 |
| | 152 | in1_max in1 in1 RW 2 |
| | 153 | in2_max in2 in2 RW 2 |
| | 154 | in3_max in3 in3 RW 2 |
| | 155 | in4_max in4 in4 RW 2 |
| | 156 | in5_max in5 in5 RW 2 |
| | 157 | in6_max in6 in6 RW 2 |
| | 158 | fan1 NONE NONE R 0 |
| | 159 | fan2 NONE NONE R 0 |
| | 160 | fan3 NONE NONE R 0 |
| | 161 | fan1_min fan1 NONE RW 0 |
| | 162 | fan2_min fan2 NONE RW 0 |
| | 163 | fan3_min fan3 NONE RW 0 |
| | 164 | temp1 NONE NONE R 1 |
| | 165 | temp1_hyst temp1 temp1 RW 1 |
| | 166 | temp1_over temp1 temp1 RW 1 |
| | 167 | temp2 NONE NONE R 1 |
| | 168 | temp2_hyst temp2 temp2 RW 1 |
| | 169 | temp2_over temp2 temp2 RW 1 |
| | 170 | temp3 NONE NONE R 1 |
| | 171 | temp3_hyst temp3 temp3 RW 1 |
| | 172 | temp3_over temp3 temp3 RW 1 |
| | 173 | vid NONE NONE R 2 |
| | 174 | fan1_div fan1 NONE RW 0 |
| | 175 | fan2_div fan2 NONE RW 0 |
| | 176 | fan3_div fan3 NONE R 0 |
| | 177 | alarms NONE NONE R 0 |
| | 178 | beep_enable alarms NONE RW 0 |
| | 179 | beeps alarms alarms RW 0 |
| | 180 | |
| | 181 | LABEL FEATURE SYMBOL SYSCTL FILE:NR |
| | 182 | in0 SENSORS_W83781D_IN0 in0:3 |
| | 183 | in1 SENSORS_W83781D_IN1 in1:3 |
| | 184 | in2 SENSORS_W83781D_IN2 in2:3 |
| | 185 | in3 SENSORS_W83781D_IN3 in3:3 |
| | 186 | in4 SENSORS_W83781D_IN4 in4:3 |
| | 187 | in5 SENSORS_W83781D_IN5 in5:3 |
| | 188 | in6 SENSORS_W83781D_IN6 in6:3 |
| | 189 | in0_min SENSORS_W83781D_IN0_MIN in0:1 |
| | 190 | in1_min SENSORS_W83781D_IN1_MIN in1:1 |
| | 191 | in2_min SENSORS_W83781D_IN2_MIN in2:1 |
| | 192 | in3_min SENSORS_W83781D_IN3_MIN in3:1 |
| | 193 | in4_min SENSORS_W83781D_IN4_MIN in4:1 |
| | 194 | in5_min SENSORS_W83781D_IN5_MIN in5:1 |
| | 195 | in6_min SENSORS_W83781D_IN6_MIN in6:1 |
| | 196 | in0_max SENSORS_W83781D_IN0_MAX in0:2 |
| | 197 | in1_max SENSORS_W83781D_IN1_MAX in1:2 |
| | 198 | in2_max SENSORS_W83781D_IN2_MAX in2:2 |
| | 199 | in3_max SENSORS_W83781D_IN3_MAX in3:2 |
| | 200 | in4_max SENSORS_W83781D_IN4_MAX in4:2 |
| | 201 | in5_max SENSORS_W83781D_IN5_MAX in5:2 |
| | 202 | in6_max SENSORS_W83781D_IN6_MAX in6:2 |
| | 203 | fan1 SENSORS_W83781D_FAN1 fan1:2 |
| | 204 | fan2 SENSORS_W83781D_FAN2 fan2:2 |
| | 205 | fan3 SENSORS_W83781D_FAN3 fan3:2 |
| | 206 | fan1_min SENSORS_W83781D_FAN1_MIN fan1:1 |
| | 207 | fan2_min SENSORS_W83781D_FAN2_MIN fan2:1 |
| | 208 | fan3_min SENSORS_W83781D_FAN3_MIN fan3:1 |
| | 209 | temp1 SENSORS_W83781D_TEMP1 temp1:3 |
| | 210 | temp1_hyst SENSORS_W83781D_TEMP1_HYST temp1:2 |
| | 211 | temp1_over SENSORS_W83781D_TEMP1_OVER temp1:1 |
| | 212 | temp2 SENSORS_W83781D_TEMP2 temp2:3 |
| | 213 | temp2_hyst SENSORS_W83781D_TEMP2_HYST temp2:2 |
| | 214 | temp2_over SENSORS_W83781D_TEMP2_OVER temp2:1 |
| | 215 | temp3 SENSORS_W83781D_TEMP3 temp3:3 |
| | 216 | temp3_hyst SENSORS_W83781D_TEMP3_HYST temp3:2 |
| | 217 | temp3_over SENSORS_W83781D_TEMP3_OVER temp3:1 |
| | 218 | vid SENSORS_W83781D_VID vid:1 |
| | 219 | fan1_div SENSORS_W83781D_FAN1_DIV fan_div:1 |
| | 220 | fan2_div SENSORS_W83781D_FAN2_DIV fan_div:2 |
| | 221 | fan3_div SENSORS_W83781D_FAN3_DIV fan_div:3 |
| | 222 | alarms SENSORS_W83781D_ALARMS alarms:1 |
| | 223 | beep_enable SENSORS_W83781D_BEEP_ENABLE beep:1 |
| | 224 | beeps SENSORS_W83781D_BEEPS beep:2 |
| | 225 | |
| | 226 | |
| | 227 | Chip `w83782d' |
| | 228 | LABEL LABEL CLASS COMPUTE CLASS ACCESS MAGNITUDE |
| | 229 | in0 NONE NONE R 2 |
| | 230 | in1 NONE NONE R 2 |
| | 231 | in2 NONE NONE R 2 |
| | 232 | in3 NONE NONE R 2 |
| | 233 | in4 NONE NONE R 2 |
| | 234 | in5 NONE NONE R 2 |
| | 235 | in6 NONE NONE R 2 |
| | 236 | in7 NONE NONE R 2 |
| | 237 | in8 NONE NONE R 2 |
| | 238 | in0_min in0 in0 RW 2 |
| | 239 | in1_min in1 in1 RW 2 |
| | 240 | in2_min in2 in2 RW 2 |
| | 241 | in3_min in3 in3 RW 2 |
| | 242 | in4_min in4 in4 RW 2 |
| | 243 | in5_min in5 in5 RW 2 |
| | 244 | in6_min in6 in6 RW 2 |
| | 245 | in7_min in7 in7 RW 2 |
| | 246 | in8_min in8 in8 RW 2 |
| | 247 | in0_max in0 in0 RW 2 |
| | 248 | in1_max in1 in1 RW 2 |
| | 249 | in2_max in2 in2 RW 2 |
| | 250 | in3_max in3 in3 RW 2 |
| | 251 | in4_max in4 in4 RW 2 |
| | 252 | in5_max in5 in5 RW 2 |
| | 253 | in6_max in6 in6 RW 2 |
| | 254 | in7_max in7 in7 RW 2 |
| | 255 | in8_max in8 in8 RW 2 |
| | 256 | fan1 NONE NONE R 0 |
| | 257 | fan2 NONE NONE R 0 |
| | 258 | fan3 NONE NONE R 0 |
| | 259 | fan1_min fan1 NONE RW 0 |
| | 260 | fan2_min fan2 NONE RW 0 |
| | 261 | fan3_min fan3 NONE RW 0 |
| | 262 | temp1 NONE NONE R 1 |
| | 263 | temp1_hyst temp1 temp1 RW 1 |
| | 264 | temp1_over temp1 temp1 RW 1 |
| | 265 | temp2 NONE NONE R 1 |
| | 266 | temp2_hyst temp2 temp2 RW 1 |
| | 267 | temp2_over temp2 temp2 RW 1 |
| | 268 | temp3 NONE NONE R 1 |
| | 269 | temp3_hyst temp3 temp3 RW 1 |
| | 270 | temp3_over temp3 temp3 RW 1 |
| | 271 | vid NONE NONE R 2 |
| | 272 | fan1_div fan1 NONE RW 0 |
| | 273 | fan2_div fan2 NONE RW 0 |
| | 274 | fan3_div fan3 NONE R 0 |
| | 275 | alarms NONE NONE R 0 |
| | 276 | beep_enable alarms NONE RW 0 |
| | 277 | beeps alarms alarms RW 0 |
| | 278 | sensor1 NONE NONE RW 0 |
| | 279 | sensor2 NONE NONE RW 0 |
| | 280 | sensor3 NONE NONE RW 0 |
| | 281 | |
| | 282 | LABEL FEATURE SYMBOL SYSCTL FILE:NR |
| | 283 | in0 SENSORS_W83782D_IN0 in0:3 |
| | 284 | in1 SENSORS_W83782D_IN1 in1:3 |
| | 285 | in2 SENSORS_W83782D_IN2 in2:3 |
| | 286 | in3 SENSORS_W83782D_IN3 in3:3 |
| | 287 | in4 SENSORS_W83782D_IN4 in4:3 |
| | 288 | in5 SENSORS_W83782D_IN5 in5:3 |
| | 289 | in6 SENSORS_W83782D_IN6 in6:3 |
| | 290 | in7 SENSORS_W83782D_IN7 in7:3 |
| | 291 | in8 SENSORS_W83782D_IN8 in8:3 |
| | 292 | in0_min SENSORS_W83782D_IN0_MIN in0:1 |
| | 293 | in1_min SENSORS_W83782D_IN1_MIN in1:1 |
| | 294 | in2_min SENSORS_W83782D_IN2_MIN in2:1 |
| | 295 | in3_min SENSORS_W83782D_IN3_MIN in3:1 |
| | 296 | in4_min SENSORS_W83782D_IN4_MIN in4:1 |
| | 297 | in5_min SENSORS_W83782D_IN5_MIN in5:1 |
| | 298 | in6_min SENSORS_W83782D_IN6_MIN in6:1 |
| | 299 | in7_min SENSORS_W83782D_IN7_MIN in7:1 |
| | 300 | in8_min SENSORS_W83782D_IN8_MIN in8:1 |
| | 301 | in0_max SENSORS_W83782D_IN0_MAX in0:2 |
| | 302 | in1_max SENSORS_W83782D_IN1_MAX in1:2 |
| | 303 | in2_max SENSORS_W83782D_IN2_MAX in2:2 |
| | 304 | in3_max SENSORS_W83782D_IN3_MAX in3:2 |
| | 305 | in4_max SENSORS_W83782D_IN4_MAX in4:2 |
| | 306 | in5_max SENSORS_W83782D_IN5_MAX in5:2 |
| | 307 | in6_max SENSORS_W83782D_IN6_MAX in6:2 |
| | 308 | in7_max SENSORS_W83782D_IN7_MAX in7:2 |
| | 309 | in8_max SENSORS_W83782D_IN8_MAX in8:2 |
| | 310 | fan1 SENSORS_W83782D_FAN1 fan1:2 |
| | 311 | fan2 SENSORS_W83782D_FAN2 fan2:2 |
| | 312 | fan3 SENSORS_W83781D_FAN3 fan3:2 |
| | 313 | fan1_min SENSORS_W83782D_FAN1_MIN fan1:1 |
| | 314 | fan2_min SENSORS_W83782D_FAN2_MIN fan2:1 |
| | 315 | fan3_min SENSORS_W83781D_FAN3_MIN fan3:1 |
| | 316 | temp1 SENSORS_W83782D_TEMP1 temp1:3 |
| | 317 | temp1_hyst SENSORS_W83782D_TEMP1_HYST temp1:2 |
| | 318 | temp1_over SENSORS_W83782D_TEMP1_OVER temp1:1 |
| | 319 | temp2 SENSORS_W83782D_TEMP2 temp2:3 |
| | 320 | temp2_hyst SENSORS_W83782D_TEMP2_HYST temp2:2 |
| | 321 | temp2_over SENSORS_W83782D_TEMP2_OVER temp2:1 |
| | 322 | temp3 SENSORS_W83782D_TEMP3 temp3:3 |
| | 323 | temp3_hyst SENSORS_W83782D_TEMP3_HYST temp3:2 |
| | 324 | temp3_over SENSORS_W83782D_TEMP3_OVER temp3:1 |
| | 325 | vid SENSORS_W83782D_VID vid:1 |
| | 326 | fan1_div SENSORS_W83782D_FAN1_DIV fan_div:1 |
| | 327 | fan2_div SENSORS_W83782D_FAN2_DIV fan_div:2 |
| | 328 | fan3_div SENSORS_W83781D_FAN3_DIV fan_div:3 |
| | 329 | alarms SENSORS_W83782D_ALARMS alarms:1 |
| | 330 | beep_enable SENSORS_W83782D_BEEP_ENABLE beep:1 |
| | 331 | beeps SENSORS_W83782D_BEEPS beep:2 |
| | 332 | sensor1 SENSORS_W83782D_SENS1 sensor1:1 |
| | 333 | sensor2 SENSORS_W83782D_SENS2 sensor2:1 |
| | 334 | sensor3 SENSORS_W83782D_SENS3 sensor3:1 |
| | 335 | |
| | 336 | |
| | 337 | Chip `w83783s' |
| | 338 | LABEL LABEL CLASS COMPUTE CLASS ACCESS MAGNITUDE |
| | 339 | in0 NONE NONE R 2 |
| | 340 | in1 NONE NONE R 2 |
| | 341 | in2 NONE NONE R 2 |
| | 342 | in3 NONE NONE R 2 |
| | 343 | in4 NONE NONE R 2 |
| | 344 | in5 NONE NONE R 2 |
| | 345 | in6 NONE NONE R 2 |
| | 346 | in0_min in0 in0 RW 2 |
| | 347 | in1_min in1 in1 RW 2 |
| | 348 | in2_min in2 in2 RW 2 |
| | 349 | in3_min in3 in3 RW 2 |
| | 350 | in4_min in4 in4 RW 2 |
| | 351 | in5_min in5 in5 RW 2 |
| | 352 | in6_min in6 in6 RW 2 |
| | 353 | in0_max in0 in0 RW 2 |
| | 354 | in1_max in1 in1 RW 2 |
| | 355 | in2_max in2 in2 RW 2 |
| | 356 | in3_max in3 in3 RW 2 |
| | 357 | in4_max in4 in4 RW 2 |
| | 358 | in5_max in5 in5 RW 2 |
| | 359 | in6_max in6 in6 RW 2 |
| | 360 | fan1 NONE NONE R 0 |
| | 361 | fan2 NONE NONE R 0 |
| | 362 | fan3 NONE NONE R 0 |
| | 363 | fan1_min fan1 NONE RW 0 |
| | 364 | fan2_min fan2 NONE RW 0 |
| | 365 | fan3_min fan3 NONE RW 0 |
| | 366 | temp1 NONE NONE R 1 |
| | 367 | temp1_hyst temp1 temp1 RW 1 |
| | 368 | temp1_over temp1 temp1 RW 1 |
| | 369 | temp2 NONE NONE R 1 |
| | 370 | temp2_hyst temp2 temp2 RW 1 |
| | 371 | temp2_over temp2 temp2 RW 1 |
| | 372 | vid NONE NONE R 2 |
| | 373 | fan1_div fan1 NONE RW 0 |
| | 374 | fan2_div fan2 NONE RW 0 |
| | 375 | fan3_div fan3 NONE R 0 |
| | 376 | alarms NONE NONE R 0 |
| | 377 | beep_enable alarms NONE RW 0 |
| | 378 | beeps alarms alarms RW 0 |
| | 379 | sensor1 NONE NONE RW 0 |
| | 380 | sensor2 NONE NONE RW 0 |
| | 381 | |
| | 382 | LABEL FEATURE SYMBOL SYSCTL FILE:NR |
| | 383 | in0 SENSORS_W83783S_IN0 in0:3 |
| | 384 | in1 SENSORS_W83783S_IN1 in1:3 |
| | 385 | in2 SENSORS_W83783S_IN2 in2:3 |
| | 386 | in3 SENSORS_W83783S_IN3 in3:3 |
| | 387 | in4 SENSORS_W83783S_IN4 in4:3 |
| | 388 | in5 SENSORS_W83783S_IN5 in5:3 |
| | 389 | in6 SENSORS_W83783S_IN6 in6:3 |
| | 390 | in0_min SENSORS_W83783S_IN0_MIN in0:1 |
| | 391 | in1_min SENSORS_W83783S_IN1_MIN in1:1 |
| | 392 | in2_min SENSORS_W83783S_IN2_MIN in2:1 |
| | 393 | in3_min SENSORS_W83783S_IN3_MIN in3:1 |
| | 394 | in4_min SENSORS_W83783S_IN4_MIN in4:1 |
| | 395 | in5_min SENSORS_W83783S_IN5_MIN in5:1 |
| | 396 | in6_min SENSORS_W83783S_IN6_MIN in6:1 |
| | 397 | in0_max SENSORS_W83783S_IN0_MAX in0:2 |
| | 398 | in1_max SENSORS_W83783S_IN1_MAX in1:2 |
| | 399 | in2_max SENSORS_W83783S_IN2_MAX in2:2 |
| | 400 | in3_max SENSORS_W83783S_IN3_MAX in3:2 |
| | 401 | in4_max SENSORS_W83783S_IN4_MAX in4:2 |
| | 402 | in5_max SENSORS_W83783S_IN5_MAX in5:2 |
| | 403 | in6_max SENSORS_W83783S_IN6_MAX in6:2 |
| | 404 | fan1 SENSORS_W83783S_FAN1 fan1:2 |
| | 405 | fan2 SENSORS_W83783S_FAN2 fan2:2 |
| | 406 | fan3 SENSORS_W83783S_FAN3 fan3:2 |
| | 407 | fan1_min SENSORS_W83783S_FAN1_MIN fan1:1 |
| | 408 | fan2_min SENSORS_W83783S_FAN2_MIN fan2:1 |
| | 409 | fan3_min SENSORS_W83783S_FAN3_MIN fan3:1 |
| | 410 | temp1 SENSORS_W83783S_TEMP1 temp1:3 |
| | 411 | temp1_hyst SENSORS_W83783S_TEMP1_HYST temp1:2 |
| | 412 | temp1_over SENSORS_W83783S_TEMP1_OVER temp1:1 |
| | 413 | temp2 SENSORS_W83783S_TEMP2 temp2:3 |
| | 414 | temp2_hyst SENSORS_W83783S_TEMP2_HYST temp2:2 |
| | 415 | temp2_over SENSORS_W83783S_TEMP2_OVER temp2:1 |
| | 416 | vid SENSORS_W83783S_VID vid:1 |
| | 417 | fan1_div SENSORS_W83783S_FAN1_DIV fan_div:1 |
| | 418 | fan2_div SENSORS_W83783S_FAN2_DIV fan_div:2 |
| | 419 | fan3_div SENSORS_W83783S_FAN3_DIV fan_div:3 |
| | 420 | alarms SENSORS_W83783S_ALARMS alarms:1 |
| | 421 | beep_enable SENSORS_W83783S_BEEP_ENABLE beep:1 |
| | 422 | beeps SENSORS_W83783S_BEEPS beep:2 |
| | 423 | sensor1 SENSORS_W83783S_SENS1 sensor1:1 |
| | 424 | sensor2 SENSORS_W83783S_SENS2 sensor2:1 |
| | 425 | |
| | 426 | |
| | 427 | |
| | 428 | Old documentation |
| | 429 | ----------------- |
| | 430 | |
| | 431 | |
