Changeset 5155

Timestamp:

03/22/08 09:52:51 (5 years ago)

Author:

khali

Message:

More consistency in output.

Files:

• i2c-tools/trunk/eeprom/decode-dimms.pl (modified) (6 diffs)

i2c-tools/trunk/eeprom/decode-dimms.pl

@@ -543 +543 @@
         else { printl $l, $bytes->[15]; }
 
-        $l = "Burst lengths supported";
+        $l = "Supported Burst Lengths";
         my @array;
         for ($ii = 0; $ii < 4; $ii++) {
@@ -579 +579 @@
 
         if (@cas >= 1) {
-                $l = "Cycle Time (CAS ".$cas[$#cas].")";
+                $l = "Cycle Time at CAS ".$cas[$#cas];
                 printl $l, "$ctime ns";
 
-                $l = "Access Time (CAS ".$cas[$#cas].")";
+                $l = "Access Time at CAS ".$cas[$#cas];
                 $temp = ($bytes->[10] >> 4) + ($bytes->[10] & 0xf) * 0.1;
                 printl $l, "$temp ns";
@@ -588 +588 @@
 
         if (@cas >= 2 && spd_written(@$bytes[23..24])) {
-                $l = "Cycle Time (CAS ".$cas[$#cas-1].")";
+                $l = "Cycle Time at CAS ".$cas[$#cas-1];
                 $temp = $bytes->[23] >> 4;
                 if ($temp == 0) { printl $l, "Undefined!"; }
@@ -596 +596 @@
                 }
 
-                $l = "Access Time (CAS ".$cas[$#cas-1].")";
+                $l = "Access Time at CAS ".$cas[$#cas-1];
                 $temp = $bytes->[24] >> 4;
                 if ($temp == 0) { printl $l, "Undefined!"; }
@@ -606 +606 @@
 
         if (@cas >= 3 && spd_written(@$bytes[25..26])) {
-                $l = "Cycle Time (CAS ".$cas[$#cas-2].")";
+                $l = "Cycle Time at CAS ".$cas[$#cas-2];
                 $temp = $bytes->[25] >> 2;
                 if ($temp == 0) { printl $l, "Undefined!"; }
                 else { printl $l, $temp + ($bytes->[25] & 0x3) * 0.25 . " ns"; }
 
-                $l = "Access Time (CAS ".$cas[$#cas-2].")";
+                $l = "Access Time at CAS ".$cas[$#cas-2];
                 $temp = $bytes->[26] >> 2;
                 if ($temp == 0) { printl $l, "Undefined!"; }
@@ -785 +785 @@
 # timings
         if (exists $cas{$highestCAS}) {
-                printl "Minimum Cycle Time (CAS $highestCAS)",
+                printl "Minimum Cycle Time at CAS $highestCAS",
                        "$ctime ns";
 
-                printl "Maximum Access Time (CAS $highestCAS)",
+                printl "Maximum Access Time at CAS $highestCAS",
                        (($bytes->[10] >> 4) * 0.1 + ($bytes->[10] & 0xf) * 0.01) . " ns";
         }
 
         if (exists $cas{$highestCAS-0.5} && spd_written(@$bytes[23..24])) {
-                printl "Minimum Cycle Time (CAS ".($highestCAS-0.5).")",
+                printl "Minimum Cycle Time at CAS ".($highestCAS-0.5),
                        (($bytes->[23] >> 4) + ($bytes->[23] & 0xf) * 0.1) . " ns";
 
-                printl "Maximum Access Time (CAS ".($highestCAS-0.5).")",
+                printl "Maximum Access Time at CAS ".($highestCAS-0.5),
                        (($bytes->[24] >> 4) * 0.1 + ($bytes->[24] & 0xf) * 0.01) . " ns";
         }
 
         if (exists $cas{$highestCAS-1} && spd_written(@$bytes[25..26])) {
-                printl "Minimum Cycle Time (CAS ".($highestCAS-1).")",
+                printl "Minimum Cycle Time at CAS ".($highestCAS-1),
                        (($bytes->[25] >> 4) + ($bytes->[25] & 0xf) * 0.1) . " ns";
 
-                printl "Maximum Access Time (CAS ".($highestCAS-1).")",
+                printl "Maximum Access Time at CAS ".($highestCAS-1),
                        (($bytes->[26] >> 4) * 0.1 + ($bytes->[26] & 0xf) * 0.01) . " ns";
         }