Changeset 5717 for lm-sensors/trunk/prog/pwm

Timestamp:

05/09/09 13:43:06 (3 years ago)

Author:

khali

Message:

Add support for absolute path to hwmon devices.

Location:

lm-sensors/trunk/prog/pwm

Files:

• fancontrol (modified) (1 diff)
• fancontrol.8 (modified) (1 diff)

lm-sensors/trunk/prog/pwm/fancontrol

@@ -160 +160 @@
 fi
 
-# Detect if config file uses the hwmon class or not yet
-if echo "${AFCPWM[0]}" | egrep -q '^hwmon[0-9]'
+# Detect path to sensors
+if echo "${AFCPWM[0]}" | egrep -q '^/'
+then
+        DIR=/
+elif echo "${AFCPWM[0]}" | egrep -q '^hwmon[0-9]'
 then
         DIR=/sys/class/hwmon

lm-sensors/trunk/prog/pwm/fancontrol.8

@@ -82 +82 @@
 .PP
 Each variable has its own line. The variable name is followed by an equal sign
-and the device=value pairs. These consist of the relative path to the pwm
-output (from /sys/bus/i2c/devices or /sys/class/hwmon
-depending on the kernel version) for which the value is valid, equal sign
-followed by the value and are separated by a blank. Example:
+and the device=value pairs. These consist of the path to the pwm output for
+which the value is valid, equal sign followed by the value and are separated
+by a blank. Path can be absolute or relative (from /sys/bus/i2c/devices or
+/sys/class/hwmon depending on the kernel version). Example:
 .IP
-MINTEMP=w83627hf-isa-0290/pwm2=40 w83627hf-isa-0290/pwm1=54
+MINTEMP=hwmon0/device/pwm1=40 hwmon0/device/pwm2=54
 .PP
 You have to play with the temperature values a bit to get happy. For initial