lm-sensors CHANGES file ----------------------- 3.0.3 (2008-09-28) libsensors: Avoid namespace pollution fancontrol: Don't use named pipes when we don't need them (#2319) pwmconfig: Tell the user about gnuplot if it isn't installed Fix MINSTOP and MINSTART test functions Test MINSTOP before MINSTART Use better step values for MINSTOP test Print the revision and date at start-up Detect and report obviously incorrect fan speeds Determine MINSTOP automatically Skip MINSTOP and MINSTART tests if fan can't stop Change default for MINTEMP from 0 to 20 degrees C Add support for attributes in the hwmon class device (#2260) Update manual page sensors-detect: Add Intel SCH (bus) support Add SMSC EMC6D103 support Improve MAX6657, MAX6658, MAX6659 detection Cache the byte data reads (#2326) Add Maxim MAX6654/MAX6690 support Add National Semiconductor LM95231 support Add Analog Devices ADT7481 support Refactor alias detection functions Fix Andigilog aSC7621 support Add Texas Instruments THMC51 support Fix Analog Devices ADT7461 support Add VIA C7 support Fix Winbond W83L786NR/NG/R/G support (#2336) Add Maxim MAX6646/MAX6647/MAX6649 support Add VIA VT1212 support Add SMSC EMC2700LPC support Add ITE IT8720 support Add Texas Instruments TMP411 support Prevent misdetection of W83627DHG on I2C as LM78 W83627DHG has no subclients Add Maxim MAX1618 support 3.0.2 (2008-05-18) documentation: Delete the FAQ, now maintained on the wiki libsensors: Use __func__ instead of __FUNCTION__ Parse the configuration file in C locale Late compute statements override early ones Support virtual hwmon devices (#2309) Support power and energy sensors Support DOS-style configuration files again (#2284) pwmconfig: Don't create the configuration file before it's needed Don't preserve configuration file customizations Fix permissions of the configuration file Don't start if fancontrol is running (#2299) fancontrol: Don't start if already running (#2299) Delete fancontrol.pid at exit time (#2299) sensord: Fix support of multiple chip names on the command line (#2321) sensors: Print energy and power sensors with automatically scaled units sensors-detect: Add SMSC SCH5027D detection Do not access I/O ports on PPC Move south bridge sensor detection to the right section Run chip_special_cases() earlier New device ID for the SMSC SCH5317 Add SMSC SCH5127 detection Add National Semiconductor LM64 detection Add Asus F8000 detection Add Intel ICH10 (bus) detection Don't probe I2C addresses 0x40-0x47 Fix the parsing of I2C addresses not to scan Detect and skip 1-register-only I2C devices Avoid SMBus word transactions where possible Add Dallas DS1631 detection 3.0.1 (2008-01-28) documentation: Update the application writing guidelines libsensors: No longer depend on libsysfs (#2262) Don't guess the bus type from the device ID format (#2240) Add support for attributes in the hwmon class device (#2260) Makefile: No warnings about ld configuration for staged installations Document the variable overriding mechanism (#2296) pwmconfig: Really hide errors on sysfs writes Deal gracefully with read-only pwm_enable files Warn about outputs found in automatic mode Repeat available configuration options before prompt (#2289) Fix duplicate warning message when config file is broken fancontrol: Detect improperly formatted FCTEMPS value (#2293) sensord: Fix rrd support (#2276) Use the same colors for daily and weekly charts Drop workaround needed by old versions of rrdtool sensors: Fix error path on library initialization error sensors.conf.eg: Fix voltage value references (g520sm, lm80, pc87366) sensors-detect: Drop PCA9540 detection Improve sysconfig and modprobe.d integration Add SMSC SCH5514D-NS detection (no sensors) Lower the confidence of MAX6650/MAX6651 Add Fintek F71858DG detection Add Fintek F81216D detection (no sensors) unhide_ICH_SMBus: Add support for the 82801AA (ICH) 3.0.0 (2007-11-24) Makefile: Fix MODULE_DIR usage in etc Fix build on PPC pwmconfig: Better diagnostics in pwmdisable Give the fans some time to spin up sensors-detect: Add Texas Instruments TMP401 detection Mention the f75375s driver Add SMSC LPC47B367-NC detection (no sensors) Reduce w83781d/lm78 I2C address probing range Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection 3.0.0-rc3 (2007-10-28) libsensors: Add a default configuration file Fix memory leaks on initialization error Make the configuration file optional Change the default configuration file to /etc/sensors3.conf sensord: Reload config on SIGHUP rather than automatically No default configuration file name sensors: Fix file handle leak on library initialization error Handle the case where voltage measurements aren't available No default configuration file name Install as sensors again sensors.conf.eg: Install as sensors3.conf sensors-detect: Fix SMSC LPC47B357/M967 detection Select the right driver for FSC chips sensors-detect-stat.pl: Handle alternative chip lists 3.0.0-rc2 (2007-10-10) useful_addresses.html: Moved to the wiki Makefile: Add sensors-conf-convert to make install libsensors: Notify the caller when writing a value fails Differentiate between different read error types Report I/O errors as such sensord: Log the error code on failure Drop the configuration file search path mechanism (#2259) Manual page update sensors: Fix spurious critical temperature alarm Print error messages to stderr Make error messages more helpful and consistent Better handling of the fault flags sensors-conf-convert: Add a short help text sensors-detect: Fix SMSC SCH311x detection Add AMD K10 CPU sensor detection 3.0.0-rc1 (2007-09-25) Initial release