root

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Chgset Date Author Log Message
(edit) @1092 [1092] 12 years mds add link to our appwatch page and two good analog devices articles.
(edit) @1091 [1091] 12 years mds add some more info on setting fan divisors.
(edit) @1090 [1090] 12 years mds Initial checkin of adm1024 driver and support in libsensors, …
(edit) @1089 [1089] 12 years mds add maxilife-nba support to libsensors.
(edit) @1088 [1088] 12 years mds really fix sensors so that it recognizes all maxilifes. didn't work …
(edit) @1087 [1087] 12 years mds fix fan min writes, fix spurious 'invalid sensor type' messages. …
(edit) @1086 [1086] 12 years mds add maxilife-nba to doc, note that sensors-detect does not support.
(edit) @1085 [1085] 12 years mds Add support for maxilife-nba by just checking for "maxilife-" prefix.
(edit) @1084 [1084] 12 years mds add function prototype for print_lm87() to eliminate warning.
(edit) @1083 [1083] 12 years phil (Phil) Added a 'how-to' document from Tomi Ollila to the end for …
(edit) @1082 [1082] 12 years mds try to clarify guidance on i2c package requirements
(edit) @1081 [1081] 12 years mds change upper case LM87 to lower case throughout, again, hopefully …
(edit) @1080 [1080] 12 years mds change from gl520sm_init() to gl520_init() to match what is in …
(edit) @1079 [1079] 12 years mds fix off-by-one bug in sensor type reads/writes in mtp008. you would …
(edit) @1078 [1078] 12 years mds add short i2c-sis5595 doc file.
(edit) @1077 [1077] 12 years mds add support for force_addr to i2c-sis5595. Also automatically enable …
(edit) @1076 [1076] 12 years mds add force_addr param to sis5595. Tested, however on my test system I …
(edit) @1075 [1075] 12 years mds fix force comments more.
(edit) @1074 [1074] 12 years mds fix comments
(edit) @1073 [1073] 12 years mds Change base-address-setting parameter from force or force_via686a to …
(edit) @1072 [1072] 12 years mds correct example temperature limits in lm78 section
(edit) @1071 [1071] 12 years mds add quotes around mtp008-x-y-z templates
(edit) @1070 [1070] 12 years mds add back temperature support for version 1 of chip. The temperature …
(edit) @1069 [1069] 12 years mds fix the following bug. Caused by 'new PCI drivers' which have the …
(edit) @1068 [1068] 12 years mds in4 fixes + more cleanup
(edit) @1067 [1067] 12 years mds fix sis5595 temp (and temp min, max, alarm). These registers are in …
(edit) @1066 [1066] 12 years mds sis5595 doc updates
(edit) @1065 [1065] 12 years mds fix sis5595 temp alarm bit location
(edit) @1064 [1064] 12 years mds add in4 for sis5595 to library
(edit) @1063 [1063] 12 years mds update
(edit) @1062 [1062] 12 years mds add gsensor and rrdtool.
(edit) @1061 [1061] 12 years mds cleanup, add summary graphs
(edit) @1060 [1060] 12 years mds minor updates
(edit) @1059 [1059] 12 years mds add example chip names to long help, it wasn't obvious.
(edit) @1058 [1058] 12 years mds fix bug in lm84 and gl523sm support; driver would recognize the chip …
(edit) @1057 [1057] 12 years mds add i2cset, simple utility to write a single location in an i2c …
(edit) @1056 [1056] 12 years mds add back missing paren from LTC change oops
(edit) @1055 [1055] 12 years mds update for devfs /dev/i2c/x devices
(edit) @1054 [1054] 12 years mds add devfs /dev/i2c/x support
(edit) @1053 [1053] 12 years mds add devfs /dev/i2c/x support
(edit) @1052 [1052] 12 years mds first cut at scripts to make the difficult RRD database package …
(edit) @1051 [1051] 12 years mds the famous "tellerstats" package of Phil's with updates from me and …
(edit) @1050 [1050] 12 years mds add rrd and tellerstats info
(edit) @1049 [1049] 12 years mds fix message about what mode you are in - used to always say i2c …
(edit) @1048 [1048] 12 years mds remove LTC1710 from mkpatch - unlikely to be needed on a PC
(edit) @1047 [1047] 12 years mds print-short-help after parse error in chip name
(edit) @1046 [1046] 12 years mds update to quickstart instructions for m7101
(edit) @1045 [1045] 12 years mds move a couple of lines around
(edit) @1044 [1044] 12 years frodo Expanded the README a little bit.
(edit) @1043 [1043] 12 years frodo Added a warning in sensors-detect for IBM Thinkpad owners.
(edit) @1042 [1042] 12 years phil (Phil) This is the best method I can think of to warn Thinkpad users of …
(edit) @1041 [1041] 12 years phil (Phil) Updates and a couple new entries.
(edit) @1040 [1040] 12 years mds documentation updates on eeproms
(edit) @1039 [1039] 12 years mds Don't reset the as99127f chip at startup. This may improve things …
(edit) @1038 [1038] 12 years mds add a sample configuration for the Tyan 2510 board which has two …
(edit) @1037 [1037] 12 years mds use normal_i2c[] instead of normal_i2c_range[] since only one address.
(edit) @1036 [1036] 12 years mds Add SiS950 as equivalent to ITE87xx.
(edit) @1035 [1035] 12 years mds add entry for dual lm87's requiring different configuration
(edit) @1034 [1034] 12 years mds add adm9240/ds1780/lm81 template, add quotes to feature names in …
(edit) @1033 [1033] 12 years mds Update doc about preserving mtp008 pin configuration.
(edit) @1032 [1032] 12 years mds Change mtp008 temperature reporting from max/min to limit/hyst. …
(edit) @1031 [1031] 12 years mds add some more comments on temp_hyst and temp_over.
(edit) @1030 [1030] 12 years mds preserve pin settings from registers 0x57 and 0x58 at startup. These …
(edit) @1029 [1029] 12 years mds fix swapped limit and hysteresis on adm9240, sis5595, and via686a. …
(edit) @1028 [1028] 12 years mds Correct and add good explanation of lm80 temp limits.
(edit) @1027 [1027] 12 years mds yet more updates
(edit) @1026 [1026] 12 years mds renamed i2c_i810i2c_init() to i2c_i810_init() to match what mkpatch …
(edit) @1025 [1025] 12 years mds change mtp008 entries from fan[1-3]_limit to fan[1-3]_min to be …
(edit) @1024 [1024] 12 years merlin Added -p/--pid-file option to write a PID file for the daemon and …
(edit) @1023 [1023] 12 years mds add full lm87 template since names are non-standard
(edit) @1022 [1022] 12 years mds fix the names in some lm87 entries in libsensors
(edit) @1021 [1021] 12 years mds fix temp2 max initialization (70 instead of 7)
(edit) @1020 [1020] 12 years mds format help a little better at top of sensors.conf, add temp limit …
(edit) @1019 [1019] 12 years mds remove CVS >>> thingie
(edit) @1018 [1018] 12 years mds new as99127f calculations for in5 and temp2 from Guntram Blohm …
(edit) @1017 [1017] 12 years mds add clarification on Xeon support in adm1021 driver.
(edit) @1016 [1016] 12 years mds add missing force_xxx documentation; work on as99127f section.
(edit) @1015 [1015] 12 years mds Disable sensors.c and i2c-isa.h in the Module.mk files. Leave the …
(edit) @1014 [1014] 12 years mds add the missing Configure.help entries
(edit) @1013 [1013] 12 years mds recognize SMSC Victory66 south bridge. No driver support yet. Looks …
(edit) @1012 [1012] 12 years frodo Better notes about mkpatch not working on 2.3 kernels
(edit) @1011 [1011] 12 years mds PCI chip detection cleanup.
(edit) @1010 [1010] 12 years mds claim support for Via 686B. Same PCI id as 686A. No driver changes.
(edit) @1009 [1009] 12 years mds have 'sensors -v' display LM_VERSION from the top level version.h …
(edit) @1008 [1008] 12 years mds add dogsled and lcd4linux
(edit) @1007 [1007] 12 years mds add thermal, gpdial_applet, www.temperatures.com
(edit) @1006 [1006] 12 years mds Adjust -12V as99127f calculation +15% based on empirical data. Still …
(edit) @1005 [1005] 12 years mds update
(edit) @1004 [1004] 12 years mds FAQ update
(edit) @1003 [1003] 12 years phil (Phil) Scales adjustment. Needs to be tested and confirmed.
(edit) @1002 [1002] 12 years phil (Phil) Fixed typo/copy-and-paste error for reading AIN2.
(edit) @1001 [1001] 12 years mds significant updates. Last real update was over a year ago. Still …
(edit) @1000 [1000] 12 years mds general update. Add more datasheet refs, alphabetize. Add sensor …
(edit) @999 [999] 12 years mds Allow force and force_via686a parameters. Driver will take the …
(edit) @998 [998] 12 years mds recognize lm78's with chipid register (0x49) == 0x20, as reported by …
(edit) @997 [997] 12 years mds add xxx_init() calls to bottom of sensors.c for those drivers added …
(edit) @996 [996] 12 years mds correct typos adm9024 -> adm9240.
(edit) @995 [995] 12 years mds add info on adding support for new drivers to mkpatch.
(edit) @994 [994] 12 years anonymous This commit was manufactured by cvs2svn to create tag 'V2-5-5'.
(edit) @993 [993] 12 years phil (Phil) Tag and release 2.5.5
Note: See TracRevisionLog for help on using the revision log.