root

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Chgset Date Author Log Message
(edit) @5981 [5981] 3 years khali Don't advertise the ipmisensors driver, it doesn't work.
(edit) @5980 [5980] 3 years khali Add 4 missing driver references.
(edit) @5979 [5979] 3 years khali Add detection of ITE IT8772E.
(edit) @5978 [5978] 3 years groeck Add detection of MAX6642
(edit) @5977 [5977] 3 years jwrdegoede f71882fg detect and sensors.conf.default updates
(edit) @5976 [5976] 3 years jwrdegoede sensors-detect: detect the sch5636
(edit) @5975 [5975] 3 years khali Use standard lm85 default section for SMSC EMC6D103 and EMC6D103S.
(edit) @5974 [5974] 3 years khali Add a default configuration section for the SMSC EMC6W201.
(edit) @5973 [5973] 3 years khali Patch from Steve Glendinning (SMSC): EMC2300 is already detected, but is …
(edit) @5972 [5972] 3 years khali Fix and improve EMC6W201 detection.
(edit) @5971 [5971] 3 years khali Improve EMC6W201 detection.
(edit) @5970 [5970] 3 years khali Drop unreliable detection of Maxim MAX6650 and MAX6651.
(edit) @5969 [5969] 3 years khali sensors: Properly support Maxim MAX6650 and MAX6651.
(edit) @5968 [5968] 3 years khali The NCT6775F and NCT6776F are supported now.
(edit) @5967 [5967] 3 years khali Add detection of SMSC EMC6W201.
(edit) @5966 [5966] 3 years khali Drop unreliable smart battery detection.
(edit) @5965 [5965] 4 years jwrdegoede The f71808a is now support by the f71882fg driver
(edit) @5964 [5964] 4 years jwrdegoede systemd integration
(edit) @5963 [5963] 4 years khali Driver available for the AMD Family 15h CPU power sensors.
(edit) @5962 [5962] 4 years khali isaset: Add support for word (16-bit) and long (32-bit) writes Sometimes …
(edit) @5961 [5961] 4 years khali isadump: Add support for word (16-bit) and long (32-bit) reads Sometimes …
(edit) @5960 [5960] 4 years khali The SMSC EMC6D103S is supported by the lm85 driver since kernel 2.6.39.
(edit) @5959 [5959] 4 years khali Add detection of AMD Family 15h power sensors.
(edit) @5958 [5958] 4 years khali Add detection of ITE IT8516E/F/G.
(edit) @5957 [5957] 4 years khali Refactor the detection of AMD CPU sensors.
(edit) @5956 [5956] 4 years groeck sensors-detect: Add detection of ADT7461A / NCT1008
(edit) @5955 [5955] 4 years khali Add AMD family 15h CPU detection.
(edit) @5954 [5954] 4 years khali Assume that the SMSC LPC47M584-NC has no hardware monitoring capabilities.
(edit) @5953 [5953] 4 years khali One more flavor of ITE IT8512.
(edit) @5952 [5952] 4 years khali We have support for the Fintek F71889A and F81865F now.
(edit) @5951 [5951] 4 years khali Post-release version update.
(edit) @5950 [5950] 4 years khali 3.3.0 release
(edit) @5949 [5949] 4 years khali Prepare for release.
(edit) @5948 [5948] 4 years khali Add a default configuration section for the F81865F.
(edit) @5947 [5947] 4 years khali Add a default configuration section for the W83795G/ADG.
(edit) @5946 [5946] 4 years khali The F71889FG and F81801U are compatible and undistinguishable.
(edit) @5945 [5945] 4 years khali Add detection of many Fintek Super-I/O devices.
(edit) @5944 [5944] 4 years khali Ensure that hysteresis and the limit it relates to are always printed on …
(edit) @5943 [5943] 4 years groeck sensors: Added support for additional sensor attributes
(edit) @5942 [5942] 4 years groeck sensors: If an attribute value is 0, display the value with its base unit, …
(edit) @5941 [5941] 4 years khali Add detection of SMSC SCH5627.
(edit) @5940 [5940] 4 years khali 0xffff isn't a valid I/O address either.
(edit) @5939 [5939] 4 years khali Only export from libsensors symbols which are actually public (i.e. listed …
(edit) @5938 [5938] 4 years groeck Added support for SENSORS_SUBFEATURE_FAN_PULSES to libsensors.
(edit) @5937 [5937] 4 years khali The Fintek F71808E isn't supported yet.
(edit) @5936 [5936] 4 years khali Count DMI chassis type 8 as a laptop. Reported by Francis Moreau.
(edit) @5935 [5935] 4 years khali Add detection of National Semiconductor LM75A.
(edit) @5934 [5934] 4 years groeck sensors-detect: Add detection of EMC6D103S
(edit) @5933 [5933] 4 years groeck Add support for AMD Family 12h and 14h thermal sensors to sensors-detect
(edit) @5932 [5932] 4 years khali D'oh! Fix it, really.
(edit) @5931 [5931] 4 years khali Fix typo in comparison.
(edit) @5930 [5930] 4 years khali Fix detection of SPD EEPROM on DDR3 memory modules. DDR3 uses CRC16 over …
(edit) @5929 [5929] 4 years khali Add support for the at24 kernel driver.
(edit) @5928 [5928] 4 years khali Decode module configuration type and refresh rate of DDR SDRAM.
(edit) @5927 [5927] 4 years groeck i2cset: Check range for data value mask
(edit) @5926 [5926] 4 years groeck i2cset: Get command/mode before reading data Get and validate the …
(edit) @5925 [5925] 4 years groeck CHANGES update for i2cset
(edit) @5924 [5924] 4 years groeck i2cset: More stringent parameter validation
(edit) @5923 [5923] 4 years groeck i2cset: Abort if value mask is set for block commands Specifying the …
(edit) @5922 [5922] 4 years groeck i2cset: Check number of arguments for block data writes
(edit) @5921 [5921] 4 years groeck i2cset: Removed obsolete method to specify value mask
(edit) @5920 [5920] 4 years groeck i2cset: Replace blanks at beginning of line with tabs
(edit) @5919 [5919] 4 years groeck Update CHANGES to reflect addition of humidity sensor support to …
(edit) @5918 [5918] 4 years groeck Added support for humidity sensors to libsensors
(edit) @5917 [5917] 4 years groeck Add support for recently added sysfs ABI attributes
(edit) @5916 [5916] 4 years groeck Fixed address ranges checked for SMSC EMC1403 and EMC1404
(edit) @5915 [5915] 4 years groeck Add support to detect EMC1002, EMC1033, EMC1046, EMC1047, EMC1072, …
(edit) @5914 [5914] 4 years khali We probe addresses 0x1c-0x1f for other chips now, so we might as well look …
(edit) @5913 [5913] 4 years khali Default config for NCT6775F and NCT6776F.
(edit) @5912 [5912] 4 years groeck Added donation information
(edit) @5911 [5911] 4 years groeck Added support to write SMBus and I2C block commands to i2cset
(edit) @5910 [5910] 4 years khali Add detection of Nuvoton NCT5571D, NCT5577D and NCT6776F.
(edit) @5909 [5909] 4 years groeck Update changelog to reflect that EMC1023, EMC1043, EMC1053, and EMC1063 …
(edit) @5908 [5908] 4 years groeck Add code to detect EMC1023, EMC1043, EMC1053, and EMC1063
(edit) @5907 [5907] 4 years groeck Added detection of MAX6639 to sensors-detect
(edit) @5906 [5906] 4 years khali Add missing ticket reference.
(edit) @5905 [5905] 4 years khali Implement universal detection for Intel digital thermal sensors. This …
(edit) @5904 [5904] 4 years khali Add detection of the ITE IT8728F.
(edit) @5903 [5903] 4 years khali Update.
(edit) @5902 [5902] 4 years khali Add a default configuration section for the Winbond/Nuvoton? W83627UHG.
(edit) @5901 [5901] 4 years khali Add detection of the National Semiconductor LM94.
(edit) @5900 [5900] 4 years khali The W83627UHG will be supported by the w83627ehf driver.
(edit) @5899 [5899] 4 years khali Only the Intel D865GSA board is dead, the CPU and memory module are still …
(edit) @5898 [5898] 4 years groeck Added support for new sysfs attributes
(edit) @5897 [5897] 4 years khali Compute MAX_*_SENSOR_TYPES at build time (#2378).
(edit) @5896 [5896] 4 years khali Compute MAX_SUBFEATURES at run-time (#2378).
(edit) @5895 [5895] 4 years khali Add detection of the Analog Devices ADT7410.
(edit) @5894 [5894] 4 years khali Make value arrays const for block write functions. Patch from Roman …
(edit) @5893 [5893] 4 years khali 3.0.3 release
(edit) @5892 [5892] 4 years khali Set version to 3.0.3.
(edit) @5891 [5891] 4 years khali Add a note about the python-devel requirement.
(edit) @5890 [5890] 4 years khali Simplify change list.
(edit) @5889 [5889] 4 years khali Add a default configuration section for the SMSC SCH5127.
(edit) @5888 [5888] 4 years khali Add detection of SMSC EMC1423.
(edit) @5887 [5887] 4 years groeck Fixed typo in lib/sensors.conf.5.
(edit) @5886 [5886] 4 years khali Add a default configuration section for the Winbond W83627THF.
(edit) @5885 [5885] 4 years khali Use a 20-bit limit for the i2c bus number. Use snprintf for the i2c dev …
(edit) @5884 [5884] 4 years khali tools: Drop arbitrary limit on I2C bus number
(edit) @5883 [5883] 4 years khali The W83667HG-B is supported by the w83627ehf driver since kernel 2.6.36.
(edit) @5882 [5882] 4 years khali Point users to the linux-i2c mailing list for questions and bug reports.
Note: See TracRevisionLog for help on using the revision log.