root/lm-sensors/branches/lm-sensors-3.0.0/CHANGES

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Chgset Date Author Log Message
(edit) @5107 [5107] 5 years khali Document the variable overriding mechanism (#2296).
(edit) @5103 [5103] 5 years khali Fix duplicate warning message when configuration file is broken.
(edit) @5102 [5102] 5 years khali Detect improperly formatted FCTEMPS value (#2293).
(edit) @5098 [5098] 5 years khali Repeat available configuration options before prompt (#2289). The code …
(edit) @5097 [5097] 5 years khali Lower the confidence value of the MAX6650/MAX6651 from 4 to 3. These chips …
(edit) @5094 [5094] 5 years khali Add detection of the SMSC SCH5514 Super-IO. The chip doesn't contain HW …
(edit) @5093 [5093] 5 years khali Add support for drivers that place the hwmon attributes in the hwmon class …
(edit) @5092 [5092] 5 years khali Get the device type from the subsystem symlink, rather than guessing it …
(edit) @5090 [5090] 5 years khali Fix error path on library initialization error. Only call fclose() if we …
(edit) @5082 [5082] 5 years khali Add support for the 82801AA (ICH).
(edit) @5080 [5080] 5 years khali Improve sysconfig and modprobe.d integration, based on suggestions by Gary …
(edit) @5076 [5076] 5 years khali sensors.conf.eg: Fix voltage value references in compute statements. The …
(edit) @5072 [5072] 5 years khali sensord: Drop workaround needed by old versions of rrdtool. The bug …
(edit) @5070 [5070] 5 years khali sensord: Use the same colors for daily and weekly charts.
(edit) @5069 [5069] 5 years khali sensord: Fix rrd support (#2276).
(edit) @5067 [5067] 5 years khali libsensors: No longer depend on libsysfs. Instead, access sysfs directly, …
(edit) @5063 [5063] 5 years khali Warn about outputs found in automatic mode.
(edit) @5061 [5061] 5 years khali Really hide errors on sysfs writes. Deal gracefully with read-only …
(edit) @5056 [5056] 5 years khali Update the application writing guidelines: * The drivers are no longer in …
(edit) @5048 [5048] 5 years ruik Add Intel Celeron 4xx and Intel Core 2 CPUs on 45nm (Penryn) detection.
(edit) @5047 [5047] 5 years khali No warnings about ld configuration for staged installations, as these make …
(edit) @5045 [5045] 5 years khali Drop detection of the Philips Semiconductors PCA9540. This is an I2C …
(edit) @5038 [5038] 5 years khali Release 3.0.0.
(edit) @5034 [5034] 5 years khali Fix MODULE_DIR usage.
(edit) @5025 [5025] 6 years khali pwmconfig: Give the fans some time to spin up.
(edit) @5023 [5023] 6 years khali pwmconfig: Better diagnostics in pwmdisable.
(edit) @5016 [5016] 6 years khali Stop probing I2C addresses 0x20-0x27 for the LM78, LM79, W83781D and …
(edit) @5009 [5009] 6 years khali sensors-detect: Add SMSC LPC47B367-NC detection. We have no datasheet, but …
(edit) @5007 [5007] 6 years khali Mention the f75375s driver. Reported by Christian Emmerich.
(edit) @5000 [5000] 6 years jwrdegoede sensors-detect: Add Texas Instruments TMP401 detection
(edit) @4997 [4997] 6 years khali Release 3.0.0-rc3.
(edit) @4991 [4991] 6 years khali Install sensors as sensors again.
(edit) @4990 [4990] 6 years khali Use /etc/sensors3.conf as the default configuration file. If it can't be …
(edit) @4989 [4989] 6 years khali Make the configuration file optional. Although in most cases it's not very …
(edit) @4988 [4988] 6 years khali Clean up if something goes wrong during initialization. Otherwise we're …
(edit) @4987 [4987] 6 years khali "sensord" no longer needs a default configuration file name. If no file …
(edit) @4986 [4986] 6 years khali "sensors" no longer needs a default configuration file name. If no file …
(edit) @4985 [4985] 6 years khali Let libsensors know the default path to its configuration file. That way, …
(edit) @4977 [4977] 6 years khali sensors: Handle the case where voltage measurements aren't available. This …
(edit) @4973 [4973] 6 years khali sensors: Fix file handle leak on library initialization error.
(edit) @4971 [4971] 6 years khali sensors-detect-stat.pl: Handle alternative chip lists. Ultimately this …
(edit) @4969 [4969] 6 years khali sensord: Reload config on SIGHUP rather than automatically. Reloading the …
(edit) @4965 [4965] 6 years khali Rename fsc-specific chip arrays to something clearer.
(edit) @4962 [4962] 6 years khali Fix SMSC LPC47B357/M967 detection. Patch from Juerg Haefliger.
(edit) @4936 [4936] 6 years khali Prepare for 3.0.0-rc2 release.
(edit) @4931 [4931] 6 years khali useful_addresses.html is in the wiki now.
(edit) @4925 [4925] 6 years ruik Add detection of AMD K10 CPU sensor.
(edit) @4922 [4922] 6 years khali Typo fix.
(edit) @4921 [4921] 6 years khali Update.
(edit) @4913 [4913] 6 years khali Fix SMSC SCH311x detection. The logical device number was missing.
(edit) @4910 [4910] 6 years khali sensors: Better handling of the fault flags.
(edit) @4899 [4899] 6 years khali libsensors: Report I/O errors as such.
(edit) @4898 [4898] 6 years khali sensors: Make error messages more helpful and consistent.
(edit) @4897 [4897] 6 years khali sensors: Print error messages to stderr.
(edit) @4896 [4896] 6 years khali libsensors: Differentiate between different read error types.
(edit) @4895 [4895] 6 years khali libsensors: Notify the caller when writing a value fails.
(edit) @4894 [4894] 6 years khali Add a short help text to sensors-conf-convert.
(edit) @4893 [4893] 6 years khali Install sensors-conf-convert as part of "make install". Users may need to …
(edit) @4892 [4892] 6 years khali Fix spurious critical temperature alarm.
(edit) @4888 [4888] 6 years khali Log the error code on failure, to make it easier to investigate problems.
(edit) @4881 [4881] 6 years khali Reset the list of changes for 3.0.0-rc1. So many things changed since …
(edit) @4816 [4816] 6 years khali Fix memory leaks in command line parsing.
(edit) @4815 [4815] 6 years khali Fix a memory leak when daemonizing.
(edit) @4813 [4813] 6 years khali Add a sample configuration section for the thmc50 and adm1022.
(edit) @4805 [4805] 6 years khali Drop all the chip-specific support from sensord.
(edit) @4802 [4802] 6 years khali Synchronize the sensord version with the lm-sensors version. We're using …
(edit) @4782 [4782] 6 years khali Delete grab_busses.sh, it's deprecated. Use sensors --bus-list instead.
(edit) @4781 [4781] 6 years khali New sensors option: --bus-list. This option lists i2c buses that are used …
(edit) @4770 [4770] 6 years khali sensors-conf-convert: New, script to convert old configuration files to …
(edit) @4735 [4735] 6 years khali Add support for the Intel Tolapai SMBus controller. Patch from Jason …
(edit) @4726 [4726] 6 years khali Fix a memory leak on error in raw print mode.
(edit) @4700 [4700] 6 years khali Delete file BUGS. All documented bugs are in kernel drivers so the …
(edit) @4699 [4699] 6 years khali Drop the CONFORMING TO sections from the man pages. lm-sensors is in no …
(edit) @4697 [4697] 6 years khali Drop sensors option -U, --hide-unknown. libsensors no longer exposes chips …
(edit) @4689 [4689] 6 years khali Add support for hardware monitoring chips on SPI buses. SPI bus …
(edit) @4677 [4677] 6 years khali Chip types can no longer contain dashes. This makes it possible to rewrite …
(edit) @4676 [4676] 6 years khali Add a new function to libsensors doing the opposite of …
(edit) @4672 [4672] 6 years khali Drop support for "dummy" bus type. The kernel no longer supports such fake …
(edit) @4666 [4666] 6 years khali Change the libsensors API so that all structures are passed by reference. …
(edit) @4661 [4661] 6 years khali Add detection of the Winbond W83L786NR/NG/R/G and W83L771W/G chips.
(edit) @4648 [4648] 6 years khali Delete sensors_do_all_sets(). I couldn't find any application using it, …
(edit) @4647 [4647] 6 years khali Don't export sensors_chip_name_has_wildcards(). I don't know of any …
(edit) @4642 [4642] 6 years khali Speed up sensors_get_ignored() a bit. We can return as soon as an ignore …
(edit) @4636 [4636] 6 years khali Fix a memory leak in sensors_read_one_sysfs_chip() when an error occurs.
(edit) @4628 [4628] 6 years khali Drop the package target.
(edit) @4604 [4604] 6 years khali Add Fintek F71806FG and F71862FG detection.
(edit) @4597 [4597] 6 years khali Add more known SMSC Super IO chips to sensors-detect. Also sort the list …
(edit) @4593 [4593] 6 years khali Delete mkdev.sh. i2c device nodes are created by devfs or udev on most 2.6 …
(edit) @4590 [4590] 6 years khali Delete fancontrol.pl. The reason given when it was added was that the bash …
(edit) @4589 [4589] 6 years khali Use linear interpolation instead of quadratic to choose PWM values. This …
(edit) @4562 [4562] 6 years khali Fix ADM1022 detection.
(edit) @4539 [4539] 6 years khali Add missing changelog entry.
(edit) @4526 [4526] 6 years khali Delete the matorb support script. The matorb driver was never ported to …
(edit) @4506 [4506] 6 years khali Delete the chip-specific code from libsensors. It's about time to get the …
(edit) @4503 [4503] 6 years khali Drop all the chip-specific handling and printing code from sensors. The …
(edit) @4479 [4479] 6 years khali Add SMSC SCH5317 detection. Patch from Juerg Haefliger.
(edit) @4473 [4473] 6 years khali libsensors: Kill procfs and sysctl support, part 2.
(edit) @4472 [4472] 6 years khali Make sensors-detect no longer depend on i2cdetect. Parsing /proc/bus/i2c …
(edit) @4469 [4469] 6 years khali Add detection for non-standard SMSC Super-I/Os. Patch from Juerg …
(edit) @4465 [4465] 6 years khali Delete all remnants of algorithm names.
Note: See TracRevisionLog for help on using the revision log.