root/lm-sensors/trunk/CHANGES

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Chgset Date Author Log Message
(edit) @1131 [1131] 13 years phil (Phil) Tag and release 2.6.0
(edit) @1127 [1127] 13 years mds add check for duplicate subclient addresses and add printk's to …
(edit) @1124 [1124] 13 years mds fixed mkpatch voodoo3 configuration
(edit) @1119 [1119] 13 years mds more updates for 2.6.0
(edit) @1112 [1112] 13 years mds Initial checkin of it87 driver from Christophe Gauthron …
(edit) @1108 [1108] 13 years mds Updates for DEC Tsunami from Oleg Vdovikin
(edit) @1101 [1101] 13 years mds Change from sensors_x to i2c_x for x = _sysctl_real _register_entry …
(edit) @1093 [1093] 13 years mds Apply tristate patch from Jesus Arias <jesus@…> which …
(edit) @1090 [1090] 13 years mds Initial checkin of adm1024 driver and support in libsensors, …
(edit) @1089 [1089] 13 years mds add maxilife-nba support to libsensors.
(edit) @1087 [1087] 13 years mds fix fan min writes, fix spurious 'invalid sensor type' messages. …
(edit) @1085 [1085] 13 years mds Add support for maxilife-nba by just checking for "maxilife-" prefix.
(edit) @1079 [1079] 14 years mds fix off-by-one bug in sensor type reads/writes in mtp008. you would …
(edit) @1078 [1078] 14 years mds add short i2c-sis5595 doc file.
(edit) @1077 [1077] 14 years mds add support for force_addr to i2c-sis5595. Also automatically enable …
(edit) @1076 [1076] 14 years mds add force_addr param to sis5595. Tested, however on my test system I …
(edit) @1073 [1073] 14 years mds Change base-address-setting parameter from force or force_via686a to …
(edit) @1070 [1070] 14 years mds add back temperature support for version 1 of chip. The temperature …
(edit) @1067 [1067] 14 years mds fix sis5595 temp (and temp min, max, alarm). These registers are in …
(edit) @1058 [1058] 14 years mds fix bug in lm84 and gl523sm support; driver would recognize the chip …
(edit) @1057 [1057] 14 years mds add i2cset, simple utility to write a single location in an i2c …
(edit) @1054 [1054] 14 years mds add devfs /dev/i2c/x support
(edit) @1053 [1053] 14 years mds add devfs /dev/i2c/x support
(edit) @1050 [1050] 14 years mds add rrd and tellerstats info
(edit) @1048 [1048] 14 years mds remove LTC1710 from mkpatch - unlikely to be needed on a PC
(edit) @1038 [1038] 14 years mds add a sample configuration for the Tyan 2510 board which has two …
(edit) @1034 [1034] 14 years mds add adm9240/ds1780/lm81 template, add quotes to feature names in …
(edit) @1032 [1032] 14 years mds Change mtp008 temperature reporting from max/min to limit/hyst. …
(edit) @1029 [1029] 14 years mds fix swapped limit and hysteresis on adm9240, sis5595, and via686a. …
(edit) @1026 [1026] 14 years mds renamed i2c_i810i2c_init() to i2c_i810_init() to match what mkpatch …
(edit) @1025 [1025] 14 years mds change mtp008 entries from fan[1-3]_limit to fan[1-3]_min to be …
(edit) @1023 [1023] 14 years mds add full lm87 template since names are non-standard
(edit) @1022 [1022] 14 years mds fix the names in some lm87 entries in libsensors
(edit) @1021 [1021] 14 years mds fix temp2 max initialization (70 instead of 7)
(edit) @1020 [1020] 14 years mds format help a little better at top of sensors.conf, add temp limit …
(edit) @1018 [1018] 14 years mds new as99127f calculations for in5 and temp2 from Guntram Blohm …
(edit) @1015 [1015] 14 years mds Disable sensors.c and i2c-isa.h in the Module.mk files. Leave the …
(edit) @1014 [1014] 14 years mds add the missing Configure.help entries
(edit) @1013 [1013] 14 years mds recognize SMSC Victory66 south bridge. No driver support yet. Looks …
(edit) @1011 [1011] 14 years mds PCI chip detection cleanup.
(edit) @1010 [1010] 14 years mds claim support for Via 686B. Same PCI id as 686A. No driver changes.
(edit) @1006 [1006] 14 years mds Adjust -12V as99127f calculation +15% based on empirical data. Still …
(edit) @1004 [1004] 14 years mds FAQ update
(edit) @999 [999] 14 years mds Allow force and force_via686a parameters. Driver will take the …
(edit) @998 [998] 14 years mds recognize lm78's with chipid register (0x49) == 0x20, as reported by …
(edit) @997 [997] 14 years mds add xxx_init() calls to bottom of sensors.c for those drivers added …
(edit) @993 [993] 14 years phil (Phil) Tag and release 2.5.5
(edit) @989 [989] 14 years mds misc. cleanup
(edit) @978 [978] 14 years mds fix CVS thingie >>>, update when i2c 2.5.5 is required.
(edit) @977 [977] 14 years frodo Oops, removed double entry
(edit) @976 [976] 14 years frodo Update in docs to reflect mkpatch changes.
(edit) @974 [974] 14 years phil (Phil) Documentation, further testing/debugging for the lm87 and osb4.
(edit) @966 [966] 14 years mds note that i2c-piix4 supports Serverworks.
(edit) @961 [961] 14 years frodo Finally added almost all drivers to mkpatch! I added the list we made …
(edit) @960 [960] 14 years mds rename /proc entries temp and remote_temp to temp1 and temp2.
(edit) @955 [955] 14 years mds (mds) rename /proc entries to in[0-5]
(edit) @948 [948] 14 years mds (mds) add serverworks osb4 support.
(edit) @945 [945] 14 years mds (mds) print message if no sensors are found rather than just silently …
(edit) @943 [943] 14 years mds (mds) Check for uninitialized base addresses. Check for unenabled sensors. …
(edit) @941 [941] 14 years mds (mds) Add "dummy writes" before bit reads as recommended in 815 …
(edit) @940 [940] 14 years mds (mds) add remote temp support (temp2) to adm1025 (also in …
(edit) @935 [935] 14 years mds (mds) add ds1621 driver from Christian Zuckschwerdt (zany@…)
(edit) @933 [933] 14 years frodo Updated the MUTEX definitions again - they are now guarded by the …
(edit) @932 [932] 14 years mds (mds) update for sensors fahrenheit and module mutex changes
(edit) @924 [924] 14 years mds (mds) add recent changes from several people
(edit) @911 [911] 14 years mds (mds) Add mtp008 driver from Kris Van Hees.
(edit) @910 [910] 14 years mds (mds) add mtp008
(edit) @908 [908] 14 years mds (mds) add support for adm1023 and adm1021a (?)
(edit) @902 [902] 14 years phil (Phil) Prep for 2.5.4 release.
(edit) @901 [901] 14 years mds (mds) add support for Via 596B with PCI ID 0x3051. Found and patch …
(edit) @895 [895] 14 years mds (mds) add m7101 module to prog/hotplug/
(edit) @891 [891] 14 years phil (Phil) Tag and release 2.5.3
(edit) @880 [880] 14 years mds (mds) update decode-dimms.
(edit) @874 [874] 14 years mds (mds) removed FORCE #ifdef which never worked anyway.
(edit) @873 [873] 14 years mds (mds) add lm87 info and changes to kernel/sensors.c for kernel …
(edit) @871 [871] 14 years mds (mds) Limit the as99127f fan_div values to 8. The as99127f apparently …
(edit) @870 [870] 14 years mds (mds) Merge with website version, update Thermistor Guide link, add …
(edit) @865 [865] 14 years mds (mds) add comment about nVidia additions to sensors-detect.
(edit) @862 [862] 14 years mds (mds) add i815 support to i2c-i810 driver.
(edit) @858 [858] 14 years mds (mds) add smbus block read support to i2cdump.
(edit) @857 [857] 14 years mds (mds) correction - previous commit was i2c block write functions only.
(edit) @856 [856] 14 years mds (mds) smbus block write fixes, i2c block write support from Rickard …
(edit) @853 [853] 14 years mds (mds) add detection for ITE 8705/8712 (no driver yet)
(edit) @850 [850] 14 years mds (mds) add LM87 detection (no driver)
(edit) @849 [849] 14 years mds (mds) add support for Intel 82801BA ICH2 (815E chipset).
(edit) @848 [848] 14 years frodo Sync of sensors -u option Somehow, this commit seems to have failed …
(edit) @847 [847] 14 years mds (mds) fix error reporting when you don't have permission to open …
(edit) @842 [842] 14 years phil (Phil) Check and date changes. Looks good.
(edit) @839 [839] 14 years mds (mds) Fix eeprom size reporting. 'sensors' previously assumed 4 …
(edit) @837 [837] 14 years merlin Added support in sensors prog for `ignore' settings on alarms so you can …
(edit) @834 [834] 14 years frodo Updated Changes file
(edit) @821 [821] 14 years phil (Phil) Tag and release 2.5.1
(edit) @819 [819] 14 years mds (mds) Change as99127f fan speed calculation based on actual …
(edit) @807 [807] 14 years mds (mds) For as99127f, remove in7-8, sensor1-3, pwm3-4
(edit) @805 [805] 14 years mds (mds) add Winbond-style bank selection.
(edit) @801 [801] 14 years mds (mds) Add adm1025 driver from Chen-Yuan Wu.
(edit) @800 [800] 14 years mds (mds) fix sensor selection for sensor2/sensor3. Enable VBAT (in8) …
(edit) @798 [798] 14 years mds (mds) added Winbond-style bank selection.
(edit) @797 [797] 14 years mds (mds) w83627hf only has 2 pwm whether on ISA or I2C bus.
(edit) @796 [796] 14 years mds (mds) fixed normal_i2c_range declaration; bus was being scanned all …
Note: See TracRevisionLog for help on using the revision log.