root/lm-sensors/trunk/CHANGES

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Chgset Date Author Log Message
(edit) @5877 [5877] 4 years khali sensors: Display 3 decimal places in raw output. This will make it easier …
(edit) @5873 [5873] 4 years khali Merge entries.
(edit) @5870 [5870] 4 years groeck Fix error seen in sensors-detect if i2c bus numbering is not sequential
(edit) @5869 [5869] 4 years khali Warn the user is either flex or bison is missing.
(edit) @5867 [5867] 4 years khali sensors-detect: Improve LM90 and W83L771 detection.
(edit) @5863 [5863] 4 years khali Prepare for release.
(edit) @5859 [5859] 4 years groeck Add support for IT8512E/F and IT8758E to sensors-detect
(edit) @5857 [5857] 4 years khali Drop legacy calls to cut. procfs had several values per file, but sysfs …
(edit) @5856 [5856] 4 years khali Wait for fans to return to full speed only once per PWM. In the rare case …
(edit) @5855 [5855] 4 years khali When looking for pwm/fan correlations, sample all fans before returning a …
(edit) @5852 [5852] 4 years khali Add detection of several JC42.4 compliant temperature sensors. Patch from …
(edit) @5851 [5851] 4 years khali Add support for the NXP SE97. Also display the new chip names for …
(edit) @5850 [5850] 4 years khali Add detection of STMicroelectronics STTS424 (JEDEC JC42.4-compliant …
(edit) @5848 [5848] 4 years khali Let ISA-access and non-sensor devices take part in the confidence …
(edit) @5846 [5846] 4 years khali W83667HG config is similar to W83627EHF/DHG.
(edit) @5845 [5845] 4 years khali Fix Maxim MAX6690 detection.
(edit) @5844 [5844] 4 years khali Change libsensors license from GPL to LGPL.
(edit) @5843 [5843] 4 years khali Map individual beep features. We had symbols for them for a long time, I …
(edit) @5841 [5841] 4 years khali Add detection of ITE IT8721F.
(edit) @5839 [5839] 4 years jwrdegoede sensors-detect: Add support for Fintek F71889ED
(edit) @5838 [5838] 4 years khali Add detection of the SMSC EMC2103. Patch from Steve Glendinning (SMSC).
(edit) @5837 [5837] 4 years khali Fix detection of RB-C3 AMD Family 10h CPU. This core is only used in …
(edit) @5836 [5836] 4 years khali Properly handle read errors from sensor inputs. Report them as "N/A". This …
(edit) @5835 [5835] 4 years khali Fix support of multiple chips. Regression in 3.1.2, faulty commit is …
(edit) @5833 [5833] 5 years khali Add detection of SMSC EMC1403 and EMC1404.
(edit) @5826 [5826] 5 years khali Increase MAX_SENSORS_PER_TYPE to 24. The old value of 20 isn't enough at …
(edit) @5823 [5823] 5 years khali Add support for Intel PCH (SMBus).
(edit) @5822 [5822] 5 years khali sensors-detect: Give udev time to settle before accessing i2c device …
(edit) @5819 [5819] 5 years khali Prepare for release.
(edit) @5817 [5817] 5 years khali Add detection for Analog Devices ADT7411.
(edit) @5814 [5814] 5 years khali Refine the detection of AMD family 10h processors with working sensors.
(edit) @5811 [5811] 5 years khali Add detection for Texas Instruments AMC6821.
(edit) @5809 [5809] 5 years khali Add detection for VIA Nano. Update driver name for VIA C7.
(edit) @5806 [5806] 5 years khali Add detection for Nuvoton W83L771AWG/ASG.
(edit) @5804 [5804] 5 years khali More known revisions for the ADT7476.
(edit) @5803 [5803] 5 years khali Add a default configuration section for adt7473 and adt7475. Add a default …
(edit) @5801 [5801] 5 years khali Fix a build warning in set_degstr. The prototype of iconv() is stupid but …
(edit) @5800 [5800] 5 years khali Restore detection for AMD Family 10h thermal sensors. Only CPU with model …
(edit) @5799 [5799] 5 years khali Detect ADT7473 at 0x2c and 0x2d.
(edit) @5798 [5798] 5 years andy CHANGES appendix for commits r5789:r5796
(edit) @5797 [5797] 5 years khali "alarm" is a glibc function, don't use this identifier for our own …
(edit) @5788 [5788] 5 years jwrdegoede sensors-detect: Add detecton for Fintek F71869FG
(edit) @5787 [5787] 5 years jwrdegoede Refer to f71882fg driver if F71889FG is detected
(edit) @5786 [5786] 5 years khali Add support for HID devices.
(edit) @5784 [5784] 5 years khali Add detection for Analog Devices ADT7490.
(edit) @5782 [5782] 5 years khali Add detection for Nuvoton W83667HG-B and W83677HG-I.
(edit) @5781 [5781] 5 years khali Add SMBus detection for AMD Hudson-2.
(edit) @5779 [5779] 5 years khali Add detection for National Semiconductor LM73.
(edit) @5773 [5773] 5 years khali Add detection for Intel Atom thermal sensors.
(edit) @5772 [5772] 5 years khali Add missing log entry.
(edit) @5770 [5770] 5 years khali Save hwmon device paths and names in configuration file, and check them …
(edit) @5769 [5769] 5 years khali Drop AMD K10 detection (unreliable sensors). Add detection for AMD Family …
(edit) @5765 [5765] 5 years khali Check that all referenced sysfs files exist before starting. If not, quilt …
(edit) @5761 [5761] 5 years khali Document the previous change.
(edit) @5759 [5759] 5 years khali Support upcoming sysfs path to i2c adapters.
(edit) @5758 [5758] 5 years khali Support upcoming sysfs path to i2c adapters.
(edit) @5757 [5757] 5 years khali The SMSC LPC47M233 isn't currently supported. If it ever is, it will most …
(edit) @5755 [5755] 5 years khali Fix exit code. If there's no change needed, this is a success, not a …
(edit) @5754 [5754] 5 years andy sensors-detect: Add TMP42x chip detection This patch adds detection for …
(edit) @5753 [5753] 5 years khali Report unsupported Access Bus adapters, as we already do for SMBus.
(edit) @5752 [5752] 5 years khali Clean up the discovery of i2c adapters, their parent and their attributes …
(edit) @5751 [5751] 5 years andy sensors-detect: Refer to tmp401 driver if TMP411 is detected
(edit) @5750 [5750] 5 years khali Encourage the user to not modify /etc/sensors3.conf. Suggested by Aurelien …
(edit) @5749 [5749] 5 years khali Exit immediately if not root.
(edit) @5742 [5742] 5 years khali Prepare for release.
(edit) @5740 [5740] 5 years khali libsensors: New method to free the memory allocated for the internal …
(edit) @5737 [5737] 5 years khali Use the "daemon" logging facility instead of "local4" by default. Local …
(edit) @5735 [5735] 5 years khali Disable unit scaling for fan speeds. We want fan speed to be reported as …
(edit) @5734 [5734] 5 years khali Don't use the system log when generating a CGI script. This is is normally …
(edit) @5730 [5730] 5 years khali From Yuriy Kaminskiy: Most filesystems (in particular - reiserfs, jfs, …
(edit) @5726 [5726] 5 years khali Add Winbond/Nuvoton? W83627DHG-P and W83627UHG detection.
(edit) @5725 [5725] 5 years andy Update CHANGES file due to recent updates in sensord.
(edit) @5717 [5717] 5 years khali Add support for absolute path to hwmon devices.
(edit) @5711 [5711] 6 years khali Make it possible to skip building of the static library. Just run: make …
(edit) @5710 [5710] 6 years khali Include generated source files in dependency checking.
(edit) @5709 [5709] 6 years khali Use geteuid instead of getuid so that setuid bit works.
(edit) @5708 [5708] 6 years khali Add National Semiconductor LM95241 detection.
(edit) @5684 [5684] 6 years khali Add Nuvoton W83795G/ADG detection. Original patch from Wei Song (Nuvoton).
(edit) @5681 [5681] 6 years khali Use dmidecode to find IPMI interfaces if available. This is required if …
(edit) @5680 [5680] 6 years khali Differentiate between PC8374L and WPCD377I. Both chips have the same …
(edit) @5677 [5677] 6 years khali Display the base I/O address of Super-I/O logical device if it is set, …
(edit) @5675 [5675] 6 years khali Add nNidia nForce MCP78S SMBus detection.
(edit) @5669 [5669] 6 years khali Prepare for release.
(edit) @5668 [5668] 6 years khali Create pid file only after successful initialization.
(edit) @5667 [5667] 6 years khali Exit if configuration file can't be read.
(edit) @5660 [5660] 6 years khali Add detection of Winbond WPCD377I (no sensors).
(edit) @5658 [5658] 6 years jwrdegoede sensors-detect: Add detection of FSC Hades and Syleus IC's
(edit) @5657 [5657] 6 years jwrdegoede sensors-detect: Add a special case for probing i2c address 0x73 for FSC …
(edit) @5655 [5655] 6 years khali Update.
(edit) @5649 [5649] 6 years khali Include the configuration file name when reporting parse errors.
(edit) @5647 [5647] 6 years khali Read extra configuration files from /etc/sensors.d.
(edit) @5645 [5645] 6 years khali Free bus statements from the configuration file as soon as we are done …
(edit) @5644 [5644] 6 years khali Exit the configuration file parser as soon as we are done with it. This …
(edit) @5640 [5640] 6 years khali Typo.
(edit) @5638 [5638] 6 years khali Report configuration file read errors.
(edit) @5637 [5637] 6 years khali Fix memory leak in scanner when using flex 2.5.9 or later.
(edit) @5636 [5636] 6 years khali When looking for hwmon device attributes, skip non-file sysfs entries. …
(edit) @5635 [5635] 6 years khali Do not include in the driver list the PCI and USB drivers which are …
(edit) @5633 [5633] 6 years khali Return a string rather than NULL for unknown errors. Patch from Andre …
(edit) @5630 [5630] 6 years khali Drop support for kernels 2.4 and earlier.
Note: See TracRevisionLog for help on using the revision log.