# sensors-detect revision 1.413 (2006/01/19 20:28:00) This program will help you determine which I2C/SMBus modules you need to load to use lm_sensors most effectively. You need to have i2c and lm_sensors installed before running this program. Also, you need to be `root', or at least have access to the /dev/i2c-* files, for most things. If you have patched your kernel and have some drivers built in, you can safely answer NO if asked to load some modules. In this case, things may seem a bit confusing, but they will still work. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. We can start with probing for (PCI) I2C or SMBus adapters. You do not need any special privileges for this. Do you want to probe now? (YES/no): Probing for PCI bus adapters... Use driver `i2c-nforce2' for device 00:01.1: nVidia Corporation nForce4 SMBus (MCP) Probe succesfully concluded. We will now try to load each adapter module in turn. Module `i2c-nforce2' already loaded. If you have undetectable or unsupported adapters, you can have them scanned by manually loading the modules before running this script. To continue, we need module `i2c-dev' to be loaded. If it is built-in into your kernel, you can safely skip this. i2c-dev is not loaded. Do you want to load it now? (YES/no): Module loaded succesfully. We are now going to do the adapter probings. Some adapters may hang halfway through; we can't really help that. Also, some chips will be double detected; we choose the one with the highest confidence value in that case. If you found that the adapter hung after probing a certain address, you can specify that address to remain unprobed. That often includes address 0x69 (clock chip). Next adapter: NVIDIA I2C Device Do you want to scan it? (YES/no/selectively): Client found at address 0x21 Probing for `National Semiconductor LM78'... Failed! Probing for `National Semiconductor LM78-J'... Failed! Probing for `National Semiconductor LM79'... Failed! Probing for `Winbond W83781D'... Failed! Probing for `Winbond W83782D'... Failed! Probing for `Winbond W83627HF'... Failed! Next adapter: NVIDIA I2C Device Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA I2C Device Do you want to scan it? (YES/no/selectively): Client found at address 0x37 Client found at address 0x50 Probing for `SPD EEPROM'... Success! (confidence 1, driver `eeprom') Probing for `DDC monitor'... Success! (confidence 8, driver `eeprom'), other addresses: 0x51 0x52 0x53 0x54 0x55 0x56 0x57 Probing for `Maxim MAX6900'... Failed! Next adapter: SMBus nForce2 adapter at f400 Do you want to scan it? (YES/no/selectively): Client found at address 0x08 Client found at address 0x2d Probing for `Myson MTP008'... Failed! Probing for `National Semiconductor LM78'... Failed! Probing for `National Semiconductor LM78-J'... Failed! Probing for `National Semiconductor LM79'... Failed! Probing for `National Semiconductor LM80'... Failed! Probing for `National Semiconductor LM85 or LM96000'... Failed! Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... Failed! Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'... Failed! Probing for `Analog Devices ADT7476'... Failed! Probing for `National Semiconductor LM87'... Failed! Probing for `National Semiconductor LM93'... Failed! Probing for `Winbond W83781D'... Failed! Probing for `Winbond W83782D'... Failed! Probing for `Winbond W83783S'... Failed! Probing for `Winbond W83791D'... Failed! Probing for `Winbond W83792D'... Failed! Probing for `Winbond W83791SD'... Failed! Probing for `Winbond W83627HF'... Failed! Probing for `Winbond W83627EHF'... Failed! Probing for `Asus AS99127F (rev.1)'... Failed! Probing for `Asus AS99127F (rev.2)'... Failed! Probing for `Asus ASB100 Bach'... Failed! Probing for `Winbond W83L784R/AR'... Failed! Probing for `Winbond W83L785R'... Failed! Probing for `Genesys Logic GL518SM Revision 0x00'... Failed! Probing for `Genesys Logic GL518SM Revision 0x80'... Failed! Probing for `Genesys Logic GL520SM'... Failed! Probing for `Genesys Logic GL525SM'... Failed! Probing for `Analog Devices ADM9240'... Failed! Probing for `Dallas Semiconductor DS1780'... Failed! Probing for `National Semiconductor LM81'... Failed! Probing for `Analog Devices ADM1026'... Failed! Probing for `Analog Devices ADM1025'... Failed! Probing for `Philips NE1619'... Failed! Probing for `Analog Devices ADM1024'... Failed! Probing for `Analog Devices ADM1029'... Failed! Probing for `Analog Devices ADM1030'... Failed! Probing for `Analog Devices ADM1031'... Failed! Probing for `Analog Devices ADM1022'... Failed! Probing for `Texas Instruments THMC50'... Failed! Probing for `VIA VT1211 (I2C)'... Failed! Probing for `ITE IT8712F'... Failed! Probing for `ALi M5879'... Failed! Probing for `SMSC LPC47M15x, LPC47M192 or LPC47M997'... Failed! Client found at address 0x4e Probing for `National Semiconductor LM75'... Failed! Probing for `Dallas Semiconductor DS1621'... Failed! Probing for `Analog Devices ADM1021'... Failed! Probing for `Analog Devices ADM1021A/ADM1023'... Failed! Probing for `Maxim MAX1617'... Failed! Probing for `Maxim MAX1617A'... Failed! Probing for `TI THMC10'... Failed! Probing for `National Semiconductor LM84'... Failed! Probing for `Genesys Logic GL523SM'... Failed! Probing for `Onsemi MC1066'... Failed! Probing for `Maxim MAX1619'... Failed! Probing for `National Semiconductor LM82/LM83'... Failed! Probing for `Maxim MAX6659'... Failed! Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed! Probing for `ITE IT8201R/IT8203R/IT8206R/IT8266R overclocking controller'... Failed! Next adapter: SMBus nForce2 adapter at f800 Do you want to scan it? (YES/no/selectively): Client found at address 0x08 Client found at address 0x50 Probing for `SPD EEPROM'... Success! (confidence 8, driver `eeprom') Probing for `DDC monitor'... Failed! Probing for `Maxim MAX6900'... Failed! Client found at address 0x52 Probing for `SPD EEPROM'... Success! (confidence 8, driver `eeprom') Some chips are also accessible through the ISA bus. ISA probes are typically a bit more dangerous, as we have to write to I/O ports to do this. This is usually safe though. Do you want to scan the ISA bus? (YES/no): Probing for `National Semiconductor LM78' Trying address 0x0290... Failed! Probing for `National Semiconductor LM78-J' Trying address 0x0290... Failed! Probing for `National Semiconductor LM79' Trying address 0x0290... Failed! Probing for `Winbond W83781D' Trying address 0x0290... Failed! Probing for `Winbond W83782D' Trying address 0x0290... Failed! Probing for `Winbond W83627HF' Trying address 0x0290... Failed! Probing for `Winbond W83627EHF' Trying address 0x0290... Failed! Probing for `Silicon Integrated Systems SIS5595' Trying general detect... Failed! Probing for `VIA Technologies VT82C686 Integrated Sensors' Trying general detect... Failed! Probing for `VIA Technologies VT8231 Integrated Sensors' Trying general detect... Failed! Probing for `ITE IT8712F' Trying address 0x0290... Failed! Probing for `ITE IT8705F / SiS 950' Trying address 0x0290... Failed! Probing for `IPMI BMC KCS' Trying address 0x0ca0... Failed! Probing for `IPMI BMC SMIC' Trying address 0x0ca8... Failed! Some Super I/O chips may also contain sensors. Super I/O probes are typically a bit more dangerous, as we have to write to I/O ports to do this. This is usually safe though. Do you want to scan for Super I/O sensors? (YES/no): Probing for `ITE 8702F Super IO Sensors' Failed! (skipping family) Probing for `Nat. Semi. PC87351 Super IO Fan Sensors' Failed! (skipping family) Probing for `SMSC 47B27x Super IO Fan Sensors' Failed! (skipping family) Probing for `VT1211 Super IO Sensors' Failed! (0x82) Probing for `Winbond W83627HF Super IO Sensors' Failed! (0x82) Probing for `Winbond W83627THF Super IO Sensors' Success... found at address 0x0290 Probing for `Winbond W83637HF Super IO Sensors' Failed! (0x82) Probing for `Winbond W83687THF Super IO Sensors' Failed! (0x82) Probing for `Winbond W83697HF Super IO Sensors' Failed! (0x82) Probing for `Winbond W83697SF/UF Super IO PWM' Failed! (0x82) Probing for `Winbond W83L517D Super IO' Failed! (0x82) Probing for `Fintek F71805F/FG Super IO Sensors' Failed! (0x8285) Probing for `Winbond W83627EHF/EHG Super IO Sensors' Failed! (0x8285) Do you want to scan for secondary Super I/O sensors? (YES/no): Probing for `ITE 8702F Super IO Sensors' Failed! (skipping family) Probing for `Nat. Semi. PC87351 Super IO Fan Sensors' Failed! (skipping family) Probing for `SMSC 47B27x Super IO Fan Sensors' Failed! (skipping family) Probing for `VT1211 Super IO Sensors' Failed! (skipping family) Probing for `Winbond W83627EHF/EHG Super IO Sensors' Failed! (skipping family) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `eeprom' (should be inserted): Detects correctly: * Bus `NVIDIA I2C Device' Busdriver `UNKNOWN', I2C address 0x50 (and 0x51 0x52 0x53 0x54 0x55 0x56 0x57) Chip `DDC monitor' (confidence: 8) * Bus `SMBus nForce2 adapter at f800' Busdriver `i2c-nforce2', I2C address 0x50 Chip `SPD EEPROM' (confidence: 8) * Bus `SMBus nForce2 adapter at f800' Busdriver `i2c-nforce2', I2C address 0x52 Chip `SPD EEPROM' (confidence: 8) Driver `w83627hf' (should be inserted): Detects correctly: * ISA bus address 0x0290 (Busdriver `i2c-isa') Chip `Winbond W83627THF Super IO Sensors' (confidence: 9) I will now generate the commands needed to load the I2C modules. To make the sensors modules behave correctly, add these lines to /etc/modules.conf: #----cut here---- # I2C module options alias char-major-89 i2c-dev #----cut here---- To load everything that is needed, add this to some /etc/rc* file: #----cut here---- # I2C adapter drivers # modprobe unknown adapter NVIDIA I2C Device # modprobe unknown adapter NVIDIA I2C Device # modprobe unknown adapter NVIDIA I2C Device modprobe i2c-nforce2 modprobe i2c-isa # I2C chip drivers modprobe eeprom modprobe w83627hf # sleep 2 # optional /usr/local/bin/sensors -s # recommended #----cut here---- WARNING! If you have some things built into your kernel, the list above will contain too many modules. Skip the appropriate ones! You really should try these commands right now to make sure everything is working properly. Monitoring programs won't work until it's done. Do you want to generate /etc/sysconfig/lm_sensors? (YES/no): no