# sensors-detect revision 4271 (2006-12-26 05:53:20 -0600)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): 
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 0000:00:1f.3: Intel Enterprise Southbridge - ESB2

We will now try to load each adapter module in turn.
Load `i2c-i801' (say NO if built into your kernel)? (YES/no): no
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.

Next adapter: NVIDIA i2c adapter 2 at a:00.0 (i2c-6)
Do you want to scan it? (YES/no/selectively): no

Next adapter: NVIDIA i2c adapter 1 at a:00.0 (i2c-5)
Do you want to scan it? (YES/no/selectively): no

Next adapter: NVIDIA i2c adapter 0 at a:00.0 (i2c-4)
Do you want to scan it? (YES/no/selectively): no

Next adapter: NVIDIA i2c adapter 2 at 9:00.0 (i2c-3)
Do you want to scan it? (YES/no/selectively): no

Next adapter: NVIDIA i2c adapter 1 at 9:00.0 (i2c-2)
Do you want to scan it? (YES/no/selectively): no

Next adapter: NVIDIA i2c adapter 0 at 9:00.0 (i2c-1)
Do you want to scan it? (YES/no/selectively): no

Next adapter: SMBus I801 adapter at 4000 (i2c-0)
Do you want to scan it? (YES/no/selectively): 

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): 
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM78-J' at 0x290...     No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No
Probing for `Winbond W83627HF' at 0x290...                  No
Probing for `Silicon Integrated Systems SIS5595'...         No
Probing for `VIA VT82C686 Integrated Sensors'...            No
Probing for `VIA VT8231 Integrated Sensors'...              No
Probing for `IPMI BMC KCS' at 0xca0...                      Success!
    (confidence 4, driver `bmcsensors')
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): 
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0xf211
Trying family `National Semiconductor'...                   Yes
Found `Nat. Semi. PC87427 Super IO Fan Sensors'             
    (but not activated)
Found `Nat. Semi. PC87427 Super IO Health Sensors'          
    (but not activated)
Trying family `SMSC'...                                     Yes
Found unknown chip with ID 0xf211
Trying family `VIA/Winbond/Fintek'...                       Yes
Found unknown chip with ID 0xf211
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'...                                      No
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No

Some CPUs or memory controllers may also contain embedded sensors.
Do you want to scan for them? (YES/no): 
AMD K8 thermal sensors...                                   No
Intel Core family thermal sensor...                         Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         Success!
    (driver `to-be-written')

Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `bmcsensors' (should be inserted):
  Detects correctly:
  * ISA bus, address 0xca0
    Chip `IPMI BMC KCS' (confidence: 4)

Driver `coretemp' (should be inserted):
  Detects correctly:
  * Chip `Intel Core family thermal sensor' (confidence: 9)

Driver `to-be-written' (should be inserted):
  Detects correctly:
  * Chip `Intel AMB FB-DIMM thermal sensor' (confidence: 9)

I will now generate the commands needed to load the required modules.
Just press ENTER to continue: 

To make the sensors modules behave correctly, add these lines to
/etc/modules.conf:

#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# You must also install and load the IPMI modules
modprobe i2c-ipmi
# Chip drivers
# Warning: the required module bmcsensors is not currently installed
# on your system. For status of 2.6 kernel ports check
# http://www.lm-sensors.org/wiki/Devices. If driver is built
# into the kernel, or unavailable, comment out the following line.
modprobe bmcsensors
# Warning: the required module coretemp is not currently installed
# on your system. For status of 2.6 kernel ports check
# http://www.lm-sensors.org/wiki/Devices. If driver is built
# into the kernel, or unavailable, comment out the following line.
modprobe coretemp
# no driver for Intel AMB FB-DIMM thermal sensor yet
# sleep 2 # optional
/usr/local/bin/sensors -s # recommended
#----cut here----

If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones! You really
should try these commands right now to make sure everything is
working properly. Monitoring programs won't work until the needed
modules are loaded.

Do you want to generate /etc/sysconfig/lm_sensors? (YES/no): no