Ticket #1108 (closed task)

Opened 9 years ago

Tyan S2720 sensors.conf? (Examined/Solved - lm_sensors 2.6.5 Linux 2.4.20)

Reported by: contact Owned by: somebody
Priority: minor Milestone:
Component: hardware Version:
Keywords: Cc:

Description

Hi,

This is a followup to ticket 1075. Can you give me any hints about configuring

sensors.conf for my Tyan S2720? I know it's in the FAQ, but I read the docs and

still have no idea how to do it. The only reference point I can think about is

the temperature recorded in the BIOS, but since I can't measure it during the

calculations, I cannot derive any formula for the sensor values.

Here is my current sensors output:

w83627hf-isa-0290

Adapter: ISA adapter

Algorithm: ISA algorithm

in0: +0.06 V (min = +1.28 V, max = +1.40 V)

in1: +0.06 V (min = +1.28 V, max = +1.40 V)

in2: +0.06 V (min = +3.13 V, max = +3.45 V)

in3: +2.99 V (min = +2.81 V, max = +3.12 V)

in4: +0.06 V (min = +2.84 V, max = +3.47 V)

in5: +0.06 V (min = +0.78 V, max = +0.33 V)

in6: +0.06 V (min = +0.94 V, max = +0.78 V)

in7: +3.20 V (min = +2.81 V, max = +3.12 V)

in8: +3.12 V (min = +2.40 V, max = +3.60 V)

fan1: 0 RPM (min = 3000 RPM, div = 2)

fan2: 0 RPM (min = 3000 RPM, div = 2)

fan3: 0 RPM (min = 3000 RPM, div = 2)

temp1: -48C (limit = +60C) sensor = thermistor

temp2: +208.0C (limit = +60C, hysteresis = +50C) sensor = thermistor

temp3: +208.0C (limit = +60C, hysteresis = +50C) sensor = thermistor

vid: +1.350 V

alarms:

beep_enable:

Sound alarm disabled

w83782d-i2c-1-29

Adapter: SMBus I801 adapter at ec80

Algorithm: Non-I2C SMBus adapter

in0: +1.47 V (min = +1.28 V, max = +1.40 V)

in1: +1.26 V (min = +1.28 V, max = +1.40 V) ALARM

in2: +3.34 V (min = +3.13 V, max = +3.45 V)

in3: +3.05 V (min = +2.81 V, max = +3.12 V)

in4: +3.02 V (min = +2.84 V, max = +3.47 V)

in5: +2.54 V (min = +0.78 V, max = +0.33 V)

in6: +1.87 V (min = +0.94 V, max = +0.78 V)

in7: +2.99 V (min = +2.81 V, max = +3.12 V)

in8: +3.20 V (min = +2.40 V, max = +3.60 V)

fan1: 9926 RPM (min = 3000 RPM, div = 2)

fan2: 9642 RPM (min = 3000 RPM, div = 2)

fan3: 33750 RPM (min = 3000 RPM, div = 2)

temp1: +73C (limit = +60C) sensor = thermistor

ALARM

temp2: +208.0C (limit = +60C, hysteresis = +50C) sensor = thermistor

temp3: +208.0C (limit = +60C, hysteresis = +50C) sensor = thermistor

vid: +1.350 V

alarms: Chassis intrusion detection ALARM

beep_enable:

Sound alarm disabled

--- start by making sure /etc/sensors.conf is installed correctly

and has sections for your chips in it.

That should get you close.

Then search tickets for somebody else who has it working,

or ask Tyan for connection information.

Note: See TracTickets for help on using tickets.