an8 abit fatality with winbond chipset (Examined/Solved - 2.6.10-5-amd64-generic sensors version 2.8.8)

[contact]

hi i've load these modules:

w83781d 36008 0

w83627hf 30624 0

i2c_sensor 3968 2 w83781d,w83627hf

i2c_isa 2816 0

i2c_dev 12416 0

i2c_core 23960 5 w83781d,w83627hf,i2c_sensor,i2c_isa,i2c_dev

on an8 abit based on nforce4 mb... i get this when i execute sensors... no temp

or fan value are correted... anyone could help ? Regards

w83627hf-isa-0290

Adapter: ISA adapter

VCore 1: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM (beep)

VCore 2: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM (beep)

+3.3V: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM (beep)

+5V: +6.85 V (min = +6.85 V, max = +6.85 V) ALARM (beep)

+12V: +15.50 V (min = +15.50 V, max = +15.50 V) ALARM (beep)

-12V: +6.06 V (min = +6.06 V, max = +6.06 V) ALARM (beep)

-5V: +5.10 V (min = +5.10 V, max = +5.10 V) ALARM (beep)

V5SB: +6.85 V (min = +6.85 V, max = +6.85 V) ALARM (beep)

VBat: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM (beep)

fan1: 0 RPM (min = 0 RPM, div = 128) ALARM (beep)

fan2: 0 RPM (min = 0 RPM, div = 128) ALARM (beep)

fan3: 0 RPM (min = 0 RPM, div = 128) ALARM (beep)

temp1: -1 C (high = -1 C, hyst = -1 C) sensor = diode ALARM

(beep)

temp2: +0.0 C (high = +0 C, hyst = +0 C) sensor = diode ALARM

(beep)

temp3: +0.0 C (high = +0 C, hyst = +0 C) sensor = diode ALARM

(beep)

vid: +0.000 V (VRM Version 0.0)

alarms: Chassis intrusion detection ALARM

beep_enable:

Sound alarm enabled

--- This motherboard uses the Guru chip for hardware monitoring, not the Winbond

W83627HF Super-I/O chip. This is why all the W83627HF lines are not connected

and you get the weird output above.

Unfortunately, Abit did not release programming specifications for the Guru, so

we cannot support it. Sorry.

Khali 2005-05-18