Ticket #385 (closed task)
Opened 7 years ago
sensors detection on C440GX+ (Examined/Solved - lm_sensors 2.5.2 Linux 2.2.17pre13-SMP)
| Reported by: | contact | Owned by: | somebody |
|---|---|---|---|
| Priority: | minor | Milestone: | |
| Component: | hardware | Version: | |
| Keywords: | Cc: |
Description
Hello!
I have server with C440GX+ motherboard.
When I start sensors-detect it find only eeprom.
Is there any way to use lm_sensors with this motherboard?
Next adapter: SMBus PIIX4 adapter at 1040 (Non-I2C SMBus adapter)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x50
Probing for 'National Semiconductor LM78'... Failed!
Probing for 'National Semiconductor LM78-J'... Failed!
Probing for 'National Semiconductor LM79'... Failed!
Probing for 'Winbond W83781D'... Failed!
Probing for 'Winbond W83782D'... Failed!
Probing for 'Winbond W83783S'... Failed!
Probing for 'Winbond W83627HF'... Failed!
Probing for 'Asus AS99127F'... Failed!
Probing for 'Serial EEPROM (PC-100 DIMM)'... Success!
(confidence 8, driver 'eeprom')
Probing for 'DDC monitor'... Failed!
Client found at address 0x51
Probing for 'National Semiconductor LM78'... Failed!2
Probing for 'National Semiconductor LM78-J'... Failed!
Probing for 'National Semiconductor LM79'... Failed!
Probing for 'Winbond W83781D'... Failed!
--- We don't track motherboards or know what is on your board.
Our HW identification flowchart ( http://www.netroedge.com/~lm78/identify.html)
may help.
You are at step 31.
Look at the board, look in the manual, ask the manufacturer.
If you have a chip that you think is a sensor, run isadump or
i2cdump on it (steps 32 and 33).
Followup by sending mail to sensors@…
and referencing ticket #372.
MDS 7/29/00
