Timeline
07/27/03:
- 12:37 Changeset [1911] by
- Add Asus Mozart-2 detection using Alex van Kaam information. …
- 12:03 Changeset [1910] by
- Add some of Alex van Kaam's comments to the as99127f-* section.
- 11:14 Changeset [1909] by
- Add documentation about the Asus clones. Most of it is from Alex …
07/26/03:
- 22:17 Changeset [1908] by
- Cosmetic fixes.
- 22:17 Changeset [1907] by
- Document the decode-edid.pl script.
- 19:59 Changeset [1906] by
- Add Philips company ID (0xA1) as seen on the NE1619 datasheet.
- 19:39 Changeset [1905] by
- Add detection of Philips NE1619 (ADM1025 clone).
- 11:38 Changeset [1904] by
- Update.
- 11:37 Changeset [1903] by
- Significant changes to the w83781d family detection method: - …
07/25/03:
- 10:44 Changeset [3830] by
- Fix includes for compilation on alpha.
- 09:56 Changeset [3829]
- This commit was manufactured by cvs2svn to create tag …
- 09:56 Changeset [3828] by
- Moved from lk2-4; see that branch for additional history.
07/24/03:
- 04:09 Changeset [3827] by
- Trivial bugfix to i2c_check_addr() (mmh) Thanks to Sergey Vlasov …
07/23/03:
- 16:41 Changeset [1902] by
- Renamed smsc74m1 to smsc47m1
07/22/03:
- 17:52 Changeset [1901] by
- Add the SAA1064.
- 17:36 Changeset [1900] by
- SAA1064 driver, written by Sascha Volkenandt.
- 17:34 Changeset [1899] by
- Add support for the saa1064 module.
- 17:33 Changeset [1898] by
- Saa1064 module documentation, written by Sascha Volkenandt.
- 17:21 Changeset [1897] by
- Mention that the SAA1064 is supported.
- 17:20 Changeset [1896] by
- Update.
- 10:44 Changeset [1895] by
- Use print instead of syswrite.
- 02:43 Changeset [1894] by
- Updated i2c-sis645 notes for 2.8.0 (oops, too late) and 2.8.1
- 01:13 Changeset [1893] by
- Revise detection strategy (again) so that the driver claims the …
07/21/03:
- 19:07 Changeset [1892] by
- (marius) Changed URL to SpeedFan? hardware database
- 15:07 Changeset [1891] by
- Prevent hang after config file creation.
- 11:15 Changeset [1890] by
- Use a single /proc callback function for all four temps. Delete …
07/20/03:
- 00:13 Changeset [1889] by
- Update.
- 00:09 Changeset [1888] by
- Add support for LM82, LM86 and LM89. Better detection for LM83 and …
07/18/03:
- 10:09 Changeset [1887] by
- Update (to keep MDS happy ;))
- 10:06 Changeset [1886] by
- Add detection (well, hm) for PCF8574 and PCF8574A. Add detection …
07/17/03:
- 19:26 Changeset [1885] by
- EDID data decoder (interfaces our eeprom module with parse-edid …
- 18:41 Changeset [1884] by
- Rewrote print_eeprom().
- 10:50 Changeset [1883] by
- Enable i2c-matrox and rivatv again. Change the name and URI for …
07/16/03:
- 09:42 Changeset [1882] by
- Fix voltage rounding.
07/15/03:
- 02:15 Changeset [1881] by
- (Phil) Tag and release 2.8.0
- 02:15 Changeset [3826] by
- (Phil) Tag and release 2.8.0
07/14/03:
- 13:41 Changeset [3825]
- This commit was manufactured by cvs2svn to create tag 'V2-8-0'.
- 13:41 Changeset [3824] by
- Add chip id 1041 for the Philips SAA1064 (4-led display).
07/12/03:
- 08:57 Changeset [3823] by
- Licensed as GPL.
07/11/03:
- 10:31 Changeset [3822] by
- Delete elektor.h from the kernel tree.
- 10:29 Changeset [3821] by
- Use -w, warning removal. Support nonexistent source files …
07/10/03:
- 15:20 Changeset [3820] by
- Reflect changes of the i2c_driver structure (and use C99 …
- 14:23 Changeset [3819] by
- Add a fat warning if I2C support is built into the kernel.
07/09/03:
- 11:00 Changeset [3818] by
- Remove old modules at more locations.
- 10:35 Changeset [3817] by
- Remove elektor and pcf-epp modules at install time (not built by …
- 09:58 Changeset [3816] by
- Typo fix.
- 03:17 Changeset [1880]
- This commit was manufactured by cvs2svn to create tag 'V2-8-0'.
- 03:17 Changeset [1879] by
- w83627thf added
07/08/03:
- 15:50 Changeset [1878] by
- Add the LM83. Update copyright year.
- 15:07 Changeset [1877] by
- Recommend the user to give a try to the modprobe and sensors -s …
- 14:47 Changeset [1876] by
- Edit the warnings for clarity.
- 11:22 Changeset [1875] by
- Temporarily disabled i2c-riva and i2c-matroxfb, until these …
- 11:06 Changeset [1874] by
- Add two important notes about the configuration file and dmidecode …
- 11:05 Changeset [3815] by
- Display an important note about the I2C incompatibility issue …
- 09:19 Changeset [1873] by
- Fix LM90 detection.
- 03:27 Changeset [1872] by
- updates for Phil
07/07/03:
- 15:37 Changeset [1871] by
- Updates from my own experience.
- 15:27 Changeset [1870] by
- Updated insmod parameters and features.
- 13:39 Changeset [1869] by
- Regerate driver features according to the new labels.
- 13:37 Changeset [1868] by
- One more fake comment to keep the documentation generator happy.
- 13:36 Changeset [1867] by
- Better message on tokenization error.
- 12:44 Changeset [1866] by
- Only install dmidecode if not existing or if older than our source …
- 12:31 Changeset [1865] by
- Add LM90 detection. Fix binmode call for Perl 5.005. Open …
- 10:32 Changeset [1864] by
- Add lm83-* section.
- 10:31 Changeset [1863] by
- Fix temps and high limits being swapped. Fix high limits not being …
- 10:30 Changeset [1862] by
- Change LM83 labels for briefness.
- 10:24 Changeset [1861] by
- List the motherboards known to possibly have an LM90 instead of an …
- 04:01 Changeset [1860] by
- update
- 03:56 Changeset [1859] by
- emc6d100 patch from P.P.
07/05/03:
- 18:16 Changeset [1858] by
- (marius) removed pwmtest, pwmconfig takes over the pwm related stuff
- 18:08 Changeset [1857] by
- (marius) documentation for fancontrol
- 18:00 Changeset [1856] by
- (marius) added URL to project page (documentation)
07/04/03:
- 23:31 Changeset [1855] by
- Documentation for the lm83 driver.
- 22:16 Changeset [3814] by
- updates
- 22:10 Changeset [1854] by
- updates
- 20:59 Changeset [3813] by
- updates
- 11:08 Changeset [1853] by
- Add missing include.
- 10:44 Changeset [1852] by
- Fix LM83 magnitudes.
- 10:42 Changeset [1851] by
- Give the filename when tokenization fails.
- 10:41 Changeset [1850] by
- Added fake comments to prevent the documentation generator from …
- 10:15 Changeset [1849] by
- Better registers comments.
- 10:14 Changeset [1848] by
- Mention the ADM1021A.
- 10:13 Changeset [1847] by
- Really remove lm83 detection from adm1021_detect. Fix detection …
07/03/03:
- 19:50 Changeset [1846] by
- LM83 updates.
- 19:49 Changeset [1845] by
- Updated my entry to mention LM83.
- 19:48 Changeset [1844] by
- Add LM83.
- 19:45 Changeset [1843] by
- Add support for lm83.
- 19:30 Changeset [1842] by
- Add support for the LM83.
- 19:28 Changeset [1841] by
- Moved LM83 detection to a separate function.
- 19:27 Changeset [1840] by
- Add a line for the lm83 module.
- 19:26 Changeset [1839] by
- A new chip driver for the LM83.
- 15:43 Changeset [3812] by
- Add LM83 driver ID.
- 08:50 Changeset [1838] by
- Removed revision, set version to 2.9.
- 08:50 Changeset [1837] by
- Regenerated FAQ using texinfo 4.5.
- 04:29 Changeset [1836] by
- updates
- 04:05 Changeset [3811] by
- use tab instead of spaces before depmod command
- 04:04 Changeset [1835] by
- use tab instead of spaces before depmod command
- 03:36 Changeset [1834] by
- updates
- 03:35 Changeset [3810] by
- updates
- 03:30 Changeset [1833] by
- don't use pci_module_init() for video i2c drivers so we don't …
- 03:29 Changeset [1832] by
- remove unused find() function
07/02/03:
- 18:37 Changeset [1831] by
- Hide warnings in flex-generated code (explicit rule for …
- 11:23 Changeset [1830] by
- Preliminary LM83 detection.
- 11:06 Changeset [1829] by
- Better detection code for LM75, based on datasheet and known …
- 09:56 Changeset [1828] by
- Automatically run depmod -a after installing modules.
- 09:56 Changeset [3809] by
- Automatically run depmod -a after installing modules.
- 09:27 Changeset [1827] by
- Armored gcc -print-search-dirs against locales.
- 09:27 Changeset [3808] by
- Armored gcc -print-search-dirs against locales.
06/30/03:
- 16:00 Changeset [1826] by
- Better warning removal (less code change).
06/29/03:
- 14:39 Changeset [1825] by
- GCC 3.2 warnings fixed.
- 00:05 Changeset [1824] by
- Do not use O_BINARY, doesn't work on older versions of Perl.
06/28/03:
- 23:56 Changeset [1823] by
- fix user headers install
- 22:04 Changeset [1822] by
- add new build targets 'user' and 'user_install'.
- 21:27 Changeset [1821] by
- clear correct bits in config word
- 20:49 Changeset [1820] by
- now automatically generated
- 20:19 Changeset [3807] by
- fix oops when compiled-in by checking owner before doing …
- 10:25 Changeset [1819] by
- Fix UTF-8 incompatibility. Thanks a lot to Jim Morris for testing!
06/27/03:
- 18:15 Changeset [1818] by
- Fixed a compiler warning, plus some code clean-ups.
- 18:11 Changeset [1817] by
- Fixed a compiler warning.
Note: See TracTimeline
for information about the timeline view.
