|Version 100 (modified by khali, 3 years ago)|
This software is OSI Certified open source software. OSI Certified is a certification mark of the Open Source Initiative.
This is the latest release of the stable branch, for Linux 2.6.5+. It supports all the devices your kernel supports, as it no longer contains chip-specific code.
- If you are using a custom configuration file and are upgrading from version 2.x, you'll need to convert it to the new format using the included sensors-conf-convert script.
- The default libsensors configuration file now only includes statements which are correct for all mainboards. This is the only way to guarantee that no wrong labels are displayed by default and no incorrect scaling factors are applied by default. If you want to revert to the old behavior, you need to manually copy etc/sensors.conf.eg to /etc/sensors3.conf. Beware though that the labels and scaling factors may or may not match your mainboard then.
- For sysconfig-based distributions, the format of the lm_sensors service configuration file has changed. If you are upgrading from version 3.0.3 or older, use the included sysconfig-lm_sensors-convert script.
- Most third party monitoring applications do already work with the library in this package, but some may still not. We are encouraging authors to port their applications to the new library. See the table below.
Files are signed by Jean Delvare.
lm_sensors-3.2.0 (162 kB)
|Application||Upstream support status||Patch||Notes|
|xsensors||Supported since 0.70||xsensors 0.60|
|gkrellm||Supported since 2.3.1||gkrellm 2.3.0|
|net-snmp||Supported in 5.5||net-snmp 5.4.1||Configure with --with-mib-modules="ucd-snmp/lmsensorsMib" --with-ldflags="-lsensors"|
|xfce4-sensors-plugin||Supported since 0.10.99.6||xfce4-sensors-plugin 0.10.99.2|
|KDE (ksysguard)||Supported since 4.1.0||kdebase 3.5.8|
|Gnome sensors applet||Supported since 2.2.1||sensors-applet 1.8.1|
|ksensors||Upstream is dead||ksensors-0.7.3-fedora-14.tar.gz||This tarball contains a version with all Debian's changes + 2 patches from Fedora, including lm_sensors-3.x support.|
This is the latest release of the legacy branch, for Linux 2.4.10+. This is a stable release without support for the newest devices, and its usage is discouraged. Userspace tools support 2.4 and 2.6 kernels. Device drivers are for Linux 2.4 only, for Linux 2.6 they are coming with the kernel itself.
- This release solves a minor compatibility issue with kernel 2.6.28 (only affecting users of the it87 driver.)
- IBM Thinkpad users should not install this version.
- You will need to install the libsysfs library (or a dev package from your distribution) if you want support for Linux 2.6, because this version of libsensors depends on it.
- If you are using Linux 2.4, lm-sensors 2.10.8 requires i2c 2.9.0 or newer.
- Recent monitoring applications may not work with this old version of libsensors.
lm_sensors-2.10.8 (914 kB)
Recommended patches: r5768.
i2c-2.10.5 (144 kB, for Linux 2.4 only)
Linux 2.6 users do not need to get this i2c package, it's already part of the kernel tree.
i2c-2.10.5.tar.gz ( PGP signature)
i2c-2.10.5.tar.gz ( PGP signature) (FTP mirror)
This is also available as a Linux 2.4 kernel i2c patch.
- Linux 2.4 users who have a monolithic (as opposed to modular) kernel or simply want some i2c drivers built-in will need to patch their kernel tree. A minor incompatibility issue exists with two drivers (bttv and tvmixer) in the Linux 2.4.23 to 2.4.28 kernels. A complete installation guide with patches is available.
- RPMs for Red Hat and Fedora Core distributions were made available by Axel Thimm on his ATrpms website.
- You can access all released files here.
- The I2C tools now have their separate page.
Anonymous access to our Subversion repository (SVN) is available. This means that users can have direct access to up-to-the-minute code.
We presume that you have Subversion installed on your machine. To check out a working copy of the stable code for this project use the following command:
svn checkout http://lm-sensors.org/svn/lm-sensors/trunk lm-sensors
Or, for the legacy branch:
svn checkout http://lm-sensors.org/svn/i2c/trunk i2c svn checkout http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-2.10 lm-sensors-2.10
To update the code, use svn update from within any checked out directory. Please read the README and INSTALL files of your working copy for how to build the code. You can use the regular svn commands on the files (like svn log [filename]) to see the comments made by the developers as changes were made.
If you're not familiar with the use of Subversion we recommend the excellent Subversion book which is a valuable resource.
Commits to the repositories are notified on the lm-sensors-notify mailing-list. Feel free to subscribe if you want to be informed of the changes made to the lm-sensors repository.
Browse the Distribution
Choose the links below to view the current development code:
Nightly SVN snapshots
They are generated at 6:10 in the morning of Central European Time ( CET/CEST)